Hello all.
I have an issue.
I recently installed cm10 on the nook color. Recently IN cm10, it stopped reading the sd card....but i could boot to cwm from the sd card....BUT while in cwm it wouldnt read the sd card >.>
So. I made it think the internal memory was the sd card, installed rom manager, and got it to "flash" cwm into internal memory...although everytime i try to reboot into recovery, it reboots and then "install failed" pops up. (Sd card removed)...it doesnt seem like it flashed anything at all.
I honestly just want the default nook color back >.<
Help?
xthedakmanx said:
Hello all.
I have an issue.
I recently installed cm10 on the nook color. Recently IN cm10, it stopped reading the sd card....but i could boot to cwm from the sd card....BUT while in cwm it wouldnt read the sd card >.>
So. I made it think the internal memory was the sd card, installed rom manager, and got it to "flash" cwm into internal memory...although everytime i try to reboot into recovery, it reboots and then "install failed" pops up. (Sd card removed)...it doesnt seem like it flashed anything at all.
I honestly just want the default nook color back >.<
Help?
Click to expand...
Click to collapse
That message is from the stock recovery on emmc. So that means Rom Manager did not install anything. If you just want stock back on emmc, go to my tips thread linked in my signature and look at item A10 to make a bootable CWM SD and item A15 to get a stock 1.4.3 rom to flash with it. You will be back to pure stock.
Sent from my HD+ rooted stock using Tapatalk
leapinlar said:
That message is from the stock recovery on emmc. So that means Rom Manager did not install anything. If you just want stock back on emmc, go to my tips thread linked in my signature and look at item A10 to make a bootable CWM SD and item A15 to get a stock 1.4.3 rom to flash with it. You will be back to pure stock.
Sent from my HD+ rooted stock using Tapatalk
Click to expand...
Click to collapse
Thing is, when I boot to CWM using an sd card, I keep getting an error that says it can't read from the sd card
xthedakmanx said:
Thing is, when I boot to CWM using an sd card, I keep getting an error that says it can't read from the sd card
Click to expand...
Click to collapse
You may need to reburn the cwm SD. Go to my NC tips thread linked in my signature and look at item A10.
Sent from my Nook HD+ Running CM10 on SD
Related
just purchased nook and flashed to autonooter.
was gonna hold off until the B&N update to see what it brought and didn't want to lose the magazine capabilities but can't wait anymore to go full cm7.
question: since i 'nooted, i already have cwm and the market. do i need to install again, or can i just download cm7 from the teamdouche link to sd card and boot up?
thanks in advance
anyone? little help?
jakehalligan said:
just purchased nook and flashed to autonooter.
was gonna hold off until the B&N update to see what it brought and didn't want to lose the magazine capabilities but can't wait anymore to go full cm7.
question: since i 'nooted, i already have cwm and the market. do i need to install again, or can i just download cm7 from the teamdouche link to sd card and boot up?
thanks in advance
Click to expand...
Click to collapse
Yep - you can install CM7 by getting the update.zip from teamdouche, copying it to your SD card, booting into CWM and selecting Install update.zip from SD card. This will overwrite your stock with CM7.
sk8house911 said:
Yep - you can install CM7 by getting the update.zip from teamdouche, copying it to your SD card, booting into CWM and selecting Install update.zip from SD card. This will overwrite your stock with CM7.
Click to expand...
Click to collapse
Are you sure of this? If you look at the steps described here: http://forum.xda-developers.com/showthread.php?t=1030227 you have to first prepare your SDCard and then install from that. I tried just installing from cwm in stock root and ended up getting assert errors and aborted installation... and if you wipe the caches like it explains needs to happen, you are stuck booting into cwm untill such time as you follow the instructions in the thread I posted, which work without a hitch if you are able to follow instructions,
migrax
What special preparation? The image being burned to the SD card is just clockwork mod, which isn't necessary if he already has CWM. Once in CWM, that guide just has you flash the CM7 update off the SD card. I don't know about the assert errors, but I don't think it has to do with how you've prepared the SD card.
jakehalligan said:
just purchased nook and flashed to autonooter.
was gonna hold off until the B&N update to see what it brought and didn't want to lose the magazine capabilities but can't wait anymore to go full cm7.
question: since i 'nooted, i already have cwm and the market. do i need to install again, or can i just download cm7 from the teamdouche link to sd card and boot up?
thanks in advance
Click to expand...
Click to collapse
So what are you wanting to do? Boot CM7 off SD card? If so, this:
http://forum.xda-developers.com/showthread.php?t=1000957
Sk8house911 is right. Just make sure you flash the correct cwr from rom manager, which is 3.0.1.0 And make a backup before you do anything.
Sent from my DROID2 using XDA App
If you want to keep the stock B&N reader, you can install CM7 to a SD card per http://forum.xda-developers.com/showthread.php?t=1000957. I did this and also installed a dual-boot menu, http://forum.xda-developers.com/showthread.php?t=962708, and can select either stock on the eMMC or CM7 on the SD card.
I'm quite happy with this arrangement, although I may change things around after the B&N Froyo update arrives.
I use the SD card method to have the nook boot into CM7 and when the SD card is pulled, the nook would be stock to be used by my kids. But I think I messed things up and can't restore. Here is what I have done:
1- I tried to update the stock version to 1.3 manually from B&N website but soon realized I could not. It seems like when in CM7, I had tried to flash CWM recovery (which was not needed and is pretty buggy in SD card method for nook). Now the recovery in emmc appears to be CWM.
2-for some stupid reason when I got into CMM recovery, I formatted boot, system,data and cache (not sure if I did boot also or not). My thinking was to flash a stock image and be fixed. But I am now stuck.
Is there a way to go back to stock on the nook? I am still able to boot into SD card and CM7 nightly. Oh ya, I use Linux Ubuntu not windows. TIA
Sounds like you should get the system back to stock before proceeding any further.
Follow the instruction here: http://www.nookdevs.com/NookColor_UnRooting
The problem is that I get into the CWM recovery and not given the reset option following the options on that page. Any idea?
I think my problem is that I'm not really rooted in true sense since I was running off the SD card. Maybe I shoudl root properly, then unroot?
I did kind of the same thing once. I made an Sd card image with CWM on another sd card -- basically as if you are going to install CM7 to emmc. However, once you get to the point where you would flash Cm7, use the stock zip ROM. It will install that to emmc so it will be back to normal. You should then be good to go.
loveubuntu said:
The problem is that I get into the CWM recovery and not given the reset option following the options on that page. Any idea?
I think my problem is that I'm not really rooted in true sense since I was running off the SD card. Maybe I shoudl root properly, then unroot?
Click to expand...
Click to collapse
If you follow the instructions you should be left with an unrooted initialized stock Nook Color. Register your account. Then you can wait for the NC to download the 1.3 update, or side load it. Once that is installed you have an unrooted 1.3 stock system.
From there you can try your CM7 card. Don't forget to remove your SD card at the very beginning since like a PC the NC will try to boot off the SD card if it is present.
jerrykur said:
If you follow the instructions you should be left with an unrooted initialized stock Nook Color. Register your account. Then you can wait for the NC to download the 1.3 update, or side load it. Once that is installed you have an unrooted 1.3 stock system.
From there you can try your CM7 card. Don't forget to remove your SD card at the very beginning since like a PC the NC will try to boot off the SD card if it is present.
Click to expand...
Click to collapse
when I follow the instruction, I am not given the factory reset option. I am stuck at the n screen. It flashed the read forever but then stuck at the n screen. Do I have to wait longer than 5 minutes?
None of this is mine, I owe it ALL to the threads mentioned below.
So as in many posts on XDA say, it's almost impossible to brick the Nook. What a great device. I had to format my SD card to use it to "un-brick" my nook but it was done. I Mainly used the info here http://forum.xda-developers.com/showthread.php?t=949699
Burnt a bootable CWM image onto my SD card. It took a while doing it with dd in Linux. I'm sure it's the same in Windows or Mac. It took about 20-30 minutes. It also took a while to unzip/extract the img file from the downloaded file. Be patient
Then used the CWM recovery remover file from http://forum.xda-developers.com/showthread.php?t=914690 to remove my CWM recovery and used the 1.0.1 file from same thread to flash the stock image onto the nook.
Once the SD card is ready, just drop those files in the root of the sd card. It should have 4 other files in it to boot into CWM recovery from the sd card and let you use the menus to flash those two zip files. It took a while but it's all in those threads. Thanks to the members. Now lets see if I can go up to 1.3 and then root it again.
you also need to do this
http://forum.xda-developers.com/showthread.php?t=1094371
and here is the ver 1.2 stock flashable with an clockwork bootable sd card
http://forum.xda-developers.com/showthread.php?t=1050520
I bought a Nook HD and would like to try out CM10 via an SD card installation. I've read through a lot the android developer forum topics, but I am confused as to what the SD card installation actually does.
I am following the steps for "CM10 sdcard Installer" from this thread: http://forum.xda-developers.com/showthread.php?t=2063968
I used PlugPBX to format and write the IMG file to my SD card.
Before I plug it into my Nook HD, I like to know what it means in step 5: 'Wait for it to finish installation." Does this mean the package from the SD card will install CM10 to the internal memory? Or does that just set it up on the SD card? After doing it this way, am I still able to remove the SD card and reboot to go back to the stock Nook OS?
Sorry, for the noob questions, but I didn't want to do anything that might not be easily reversible, possibly void the warrant, or make it so I can't return the Nook HD within B&N's 14 day window.
Thanks in advance for the help!
dmgibney said:
Before I plug it into my Nook HD, I like to know what it means in step 5: 'Wait for it to finish installation." Does this mean the package from the SD card will install CM10 to the internal memory? Or does that just set it up on the SD card? After doing it this way, am I still able to remove the SD card and reboot to go back to the stock Nook OS?
Click to expand...
Click to collapse
What that is referring to is the SD needs to make more changes to prepare the SD for installing CM. It creates more partitions on the SD and formats them so a ROM can be installed to it later. No changes are being made to your internal memory or stock setup. Then you still need to install the actual CM ROM. And at any time, when powered off, you can remove the SD and boot to stock as if nothing were ever done to it.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
What that is referring to is the SD needs to make more changes to prepare the SD for installing CM. It creates more partitions on the SD and formats them so a ROM can be installed to it later. No changes are being made to your internal memory or stock setup. Then you still need to install the actual CM ROM. And at any time, when powered off, you can remove the SD and boot to stock as if nothing were ever done to it.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks for the reply!
To flash the ROM I just put cm-10-20130101-UNOFFICIAL-hummingbird.zip from the link in the OP on the root of the SD card and install via the CM recovery, right?
Then do I need to flash the Gapps separately?
The order doesn't matter and I don't need to wipe anything in between right?
The order does matter, ROM first and gapps second. But you don't have to wipe anything.
And why are you choosing that old CM10 ROM from January? Use the latest CM10.1 ROM, you will be happier. And if you do, you will need a newer gapps too. Gapps-20130301-jb-signed.zip. Get it from goo.im.
And no, you do not put the CM ROM on the root partition, since recovery will not see it there. Follow the directions in the OP to get it where recovery can see it.
Sent from my Nook HD+ running CM10.1 on emmc.
After some finagling around with a hybrid install of CM10.1 on my HD+, I've now installed the Carbon rom to EMMC. My main memory card is a 32GB microSD card and I've got a bootable CWM setup on a spare 64MB microSD card.
Switching back and forth just to get into CWM recovery is getting annoying, and I've noticed that in the power button menu on the Carbon rom, there's an option to reboot straight into recovery but it doesn't work. It simply takes me to some error graphic that says "install failed" and that I should power the device off and back on. I've tried to install CWM via Rom Manager and TWRP via the GooManager app, but both tell me it couldn't find a proper recovery for my device and won't install. Rom Manager is quite odd, it says it's detected that both TWRP and CWM are installed. Is there a way to install recovery onto the Nook HD+ so I don't have to keep switching microSD cards? I've looked around the forums and found this:
http://forum.xda-developers.com/showpost.php?p=43173042&postcount=1195
but that appears to only be for verygreen's CM10.1. Trying to install that via the bootable CWM microSD card fails.
RGM79 said:
After some finagling around with a hybrid install of CM10.1 on my HD+, I've now installed the Carbon rom to EMMC. My main memory card is a 32GB microSD card and I've got a bootable CWM setup on a spare 64MB microSD card.
Switching back and forth just to get into CWM recovery is getting annoying, and I've noticed that in the power button menu on the Carbon rom, there's an option to reboot straight into recovery but it doesn't work. It simply takes me to some error graphic that says "install failed" and that I should power the device off and back on. I've tried to install CWM via Rom Manager and TWRP via the GooManager app, but both tell me it couldn't find a proper recovery for my device and won't install. Rom Manager is quite odd, it says it's detected that both TWRP and CWM are installed. Is there a way to install recovery onto the Nook HD+ so I don't have to keep switching microSD cards? I've looked around the forums and found this:
http://forum.xda-developers.com/showpost.php?p=43173042&postcount=1195
but that appears to only be for verygreen's CM10.1. Trying to install that via the bootable CWM microSD card fails.
Click to expand...
Click to collapse
That boot to recovery is booting to stock recovery and that is what is giving you that error message.
And do not use ROM Manager, it will mess up you device. And GooManager does not support this device.
Verygreen's CWM should work fine on your Carbon ROM. That link pointed to his TWRP recovery and he may have put an assert statement to only flash on his ROM (what was the error message?). Try his CWM and see if it flashes. It should install and work fine.
Sent from my Nook HD+ running CM10.1 on emmc.
Oh boy do I feel stupid. I guess I was lacking sleep - I had downloaded the wrong TWRP filesin verygreen's post. Instead of using the flashable zip (twrp-recovery-ovation-3.zip) I accidentally tried to use the other file he linked to (ovation-sdcard-twrp-files.zip). The filenames not being very descriptive didn't stop me from going ahead and wondering what the hell wasn't working.
All's well, TWRP loads fine and the reboot to recovery option in the power menu works as well.
Here is my problem description:-
I was using CM10.1.3 emmc with CWM latest version as suggested in the respective thread. I have installed a SD formatter app from Google Play and tried to format my 32GB Class 10 Samsung MicroSD card inside the device. After that, the sd card was non writable. So I tried to restart the device, but alas, it got stuck in the 1st Black screen with the big Nook. Not even able to boot into CWM. Even the CyanogenMod logo didn't come.
I have a bootable CWM (6.0.28) recovery MicroSD card (8GB Class 4) and used it to boot into recovery, cleared Cache/ Factory reset, Dalvik Cache and then again flashed Carbon unofficial 4.3 JB rom and Gapps for JB 4.3. But it still getting stuck in the 1st Nook screen.
After reading a lots of thread here, it looks like that during the format of SD card, it somehow destroyed the proper partitions of the emmc. But unlike others mentioned in different Bricked Nook HD thread, I am able to access each components of emmc when booted from CWM Bootable card, able to mount internal storage etc.
So, is there a solution to restore the emmc partitioning properly? I tried to connect it to PC for connecting it through adb but didn't have the proper usb driver for it. The driver I got, needs the hardware id of the product to modify the inf file which sadly I can't access in the device.
I also tried to restore it to stock 2.2 rom from the CWM backup created earlier before installing CM10.1.3. It got restored but didn't solve the problem, it still getting stuck into Black screen with Nook written to it, the one comes before CM logo.
Please help.
Anyone? Please guys help me here.
Suryasis said:
Here is my problem description:-
I was using CM10.1.3 emmc with CWM latest version as suggested in the respective thread. I have installed a SD formatter app from Google Play and tried to format my 32GB Class 10 Samsung MicroSD card inside the device. After that, the sd card was non writable. So I tried to restart the device, but alas, it got stuck in the 1st Black screen with the big Nook. Not even able to boot into CWM. Even the CyanogenMod logo didn't come.
I have a bootable CWM (6.0.28) recovery MicroSD card (8GB Class 4) and used it to boot into recovery, cleared Cache/ Factory reset, Dalvik Cache and then again flashed Carbon unofficial 4.3 JB rom and Gapps for JB 4.3. But it still getting stuck in the 1st Nook screen.
After reading a lots of thread here, it looks like that during the format of SD card, it somehow destroyed the proper partitions of the emmc. But unlike others mentioned in different Bricked Nook HD thread, I am able to access each components of emmc when booted from CWM Bootable card, able to mount internal storage etc.
So, is there a solution to restore the emmc partitioning properly? I tried to connect it to PC for connecting it through adb but didn't have the proper usb driver for it. The driver I got, needs the hardware id of the product to modify the inf file which sadly I can't access in the device.
I also tried to restore it to stock 2.2 rom from the CWM backup created earlier before installing CM10.1.3. It got restored but didn't solve the problem, it still getting stuck into Black screen with Nook written to it, the one comes before CM logo.
Please help.
Click to expand...
Click to collapse
What SD formatter app program from Play Store are you talking about? I need to know that so I can determine what you did?
Sent from my SCH-i705 using XDA Premium HD app
I have used the tool AParted (https://play.google.com/store/apps/details?id=com.sylkat.AParted) and tried to format my 32GB Samsung Class 10 MicroSD card.
BTW, in the mean time, I did little bit of digging and got the Serial of the Tab and if you want can share with you. I have also tried to install the CM10.2 SD card version with CWM 6.027 Bootable SD card. I was able to push the Zip files to the SD card using QtADB tool by mounting the SD card in the CWM menu, installed the CM rom to SD card and then installed the Gapps for JB 4.3. Still unable to boot into CM, it is going to CWM in every restart. Used this guide http://forum.xda-developers.com/showthread.php?t=2032364 for installation.
Suryasis said:
I have used the tool AParted (https://play.google.com/store/apps/details?id=com.sylkat.AParted) and tried to format my 32GB Samsung Class 10 MicroSD card.
BTW, in the mean time, I did little bit of digging and got the Serial of the Tab and if you want can share with you. I have also tried to install the CM10.2 SD card version with CWM 6.027 Bootable SD card. I was able to push the Zip files to the SD card using QtADB tool by mounting the SD card in the CWM menu, installed the CM rom to SD card and then installed the Gapps for JB 4.3. Still unable to boot into CM, it is going to CWM in every restart. Used this guide http://forum.xda-developers.com/showthread.php?t=2032364 for installation.
Click to expand...
Click to collapse
You are using some strange and outdated tools. That AParted probably really messed up you internal memory.
That guide is an old one for putting CM10 on an SD install. And you do not install the SD version of CM10.2 with that 6027 bootable CWM SD. Pick a newer guide and start again.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You are using some strange and outdated tools. That AParted probably really messed up you internal memory.
That guide is an old one for putting CM10 on an SD install. And you do not install the SD version of CM10.2 with that 6027 bootable CWM SD. Pick a newer guide and start again.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Actually I realised that and used the new guide for for installation of latest CM10.2 build by using the latest guide here: http://forum.xda-developers.com/showthread.php?p=36421852#post36421852. But whenever I am trying to boot into CM10.2, it is getting booted into CWM recovery.
I have checked in another thread where you had made a ZIP file to fix the internal storage structure, is it possible for my case.? Should I use this guide: http://iamafanof.wordpress.com/2013/09/17/cm10-2-jellybean-android-4-3-for-nook-hd-18sep2013/
I have used the method in http://iamafanof.wordpress.com/2013/09/17/cm10-2-jellybean-android-4-3-for-nook-hd-18sep2013/ and installed 10.2. But during restart, it is showing the message that /Bootdata/BCB missing and probably that is the reason, it is always rebooting into recovery mode. I have checked in one thread where you have made a flashable Zip file to restore the system partitions. Can it be done for my case?
Waiting for your answer.
Suryasis said:
I have used the method in http://iamafanof.wordpress.com/2013/09/17/cm10-2-jellybean-android-4-3-for-nook-hd-18sep2013/ and installed 10.2. But during restart, it is showing the message that /Bootdata/BCB missing and probably that is the reason, it is always rebooting into recovery mode. I have checked in one thread where you have made a flashable Zip file to restore the system partitions. Can it be done for my case?
Waiting for your answer.
Click to expand...
Click to collapse
Start over and use this thread:
http://forum.xda-developers.com/showthread.php?t=2317500
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Start over and use this thread:
http://forum.xda-developers.com/showthread.php?t=2317500
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Will that fix the emmc partitions in HD+? Initially I have installed CM10.1.3 by using this method and after the issue occurred, I tried to install the Carbon 4.3 ROM through CWM recovery after performing FActory reset, cache cleaning and Dalvik Cache cleanup. But that didn't solve the issue. I have even tried to restore the stock Nook 2.2 firmware from the CWM recovery which I created earlier before installing the CM10.3. But the issue didn't get resolved.
Suryasis said:
Will that fix the emmc partitions in HD+? Initially I have installed CM10.1.3 by using this method and after the issue occurred, I tried to install the Carbon 4.3 ROM through CWM recovery after performing FActory reset, cache cleaning and Dalvik Cache cleanup. But that didn't solve the issue. I have even tried to restore the stock Nook 2.2 firmware from the CWM recovery which I created earlier before installing the CM10.3. But the issue didn't get resolved.
Click to expand...
Click to collapse
If you used the CWM from that thread and flashed the plain stock 2.2.0, it should have fixed it.
Sent from my BN NookHD+ using XDA Premium HD app
I have tried the following steps:-
Downloaded the TWRP emmc 2.6 Bootfiles, copied them to a 64GB Class 10 sd card by formatting it to FAT32, setting it to active and then copied the Files (MLO file 1st) into it.
Also copied Nook stock 2.2 zip in the sd card.
With the card installed, Nook HD+ booted into TWRP recovery.
Performed a factory reset and wipe data.
Installed the stock rom.
After that, I checked the Bootfile partition and it was having the BCB file.
I am also able to access 27GB Emmc and copied all the zip files to Internal store using TWRP file manager.
Now I took out the SD card and tried to boot the Tab but it was again stuck into 1st Boot screen with Nook logo.
When I inserted the card 2nd time and checked the Boot Data partition using the TWRP's integrated file manager, there was nothing inside of the /BootData folder.
Is there a way to build the /Bootfiles/BCB for Nook HD plus?
Suryasis said:
I have tried the following steps:-
Downloaded the TWRP emmc 2.6 Bootfiles, copied them to a 64GB Class 10 sd card by formatting it to FAT32, setting it to active and then copied the Files (MLO file 1st) into it.
Also copied Nook stock 2.2 zip in the sd card.
With the card installed, Nook HD+ booted into TWRP recovery.
Performed a factory reset and wipe data.
Installed the stock rom.
After that, I checked the Bootfile partition and it was having the BCB file.
I am also able to access 27GB Emmc and copied all the zip files to Internal store using TWRP file manager.
Now I took out the SD card and tried to boot the Tab but it was again stuck into 1st Boot screen with Nook logo.
When I inserted the card 2nd time and checked the Boot Data partition using the TWRP's integrated file manager, there was nothing inside of the /BootData folder.
Is there a way to build the /Bootfiles/BCB for Nook HD plus?
Click to expand...
Click to collapse
it will do no good to build that file since you already had it and the boot to emmc wiped it out. TWRP puts it back when it exits, but your normal boot seems to remove it.
Sent from my SCH-i705 using XDA Premium HD app
Please suggest me a solution for it. I read here that there is a special type of SD installation possible with no access to the emmc and the OS will threat the SD card like it treats the emmc. Could you link me to a proper guide to do that?
Also, in my case, what might be the main problem of deletion of the Bootdata partition during emmc boot? Is there any possible solution for it?
Also, if possible, provide me the Zip file for the fix, just wanted to try it out as nothing is working till now.
Anybody? please let me know how to fix the emmc partitions. I still has hope as I am completely able to access my EMMC via SD card boot.While using TWRP recovery, I can even copy files from my SD card to internal memory of the device. Also able to flash Roms too.
So please provide me a flashable Zip file which can reconstruct the EMMC file structure for proper boot.
Suryasis said:
Anybody? please let me know how to fix the emmc partitions. I still has hope as I am completely able to access my EMMC via SD card boot.While using TWRP recovery, I can even copy files from my SD card to internal memory of the device. Also able to flash Roms too.
So please provide me a flashable Zip file which can reconstruct the EMMC file structure for proper boot.
Click to expand...
Click to collapse
I'm also in need of the same thing. I believe SD card manager or some such program fubared my partitions so now my Nook HD+ just hangs at the nook logo when booting from EMMC. I can boot off SD just fine though.
Suryasis said:
Please suggest me a solution for it. I read here that there is a special type of SD installation possible with no access to the emmc and the OS will threat the SD card like it treats the emmc. Could you link me to a proper guide to do that?
Also, in my case, what might be the main problem of deletion of the Bootdata partition during emmc boot? Is there any possible solution for it?
Click to expand...
Click to collapse
I was also in a similar situation in that I was stuck at the nook screen and not able to go beyond. I thought it was due to a discharged battery and leaving the Nook in my car in -20 F weather. However, I was not able to enter recovery. I found a thread by Verygreen detailing an SD card only installation for bad emmc units. I dd'd the image to the sd card and booted to cwm on the card. Then shut down, pulled the sd card and copied the rom to the card. Rebooted and the install went through correctly. I now have a working Nook HD+ although I don't have emmc access. But at least it works now. I found the thread in one of the other "Stuck on Nook screen" threads. Hope this helps you.