Database Develop

[Q] [ I9001 ] Restore stock recover

Hi all guys!
I've searched into the whole forum and Internet but I cannot find an answer to my question.
After the FeaMod Recovery installation I know I can return to stock recovery by installing a stock ROM. This is a great thing.
But what about restoring stock recovery without installing the whole ROM?!?! Is it possible?!
Sorry if my question has an answer in the forum yet... I really can't find it.
Thank u very much!!!

If you extract original recovery from a stock rom you can dd it to your device. Or you take the stock recovery.img and modify the flashable cwm zip by replacing cwm recovery.img with stock recovery.img and flash that with cwm.
Sent from my GT-I9001 using XDA App

Hi. First of all TY for ur reply.
Then for this I need some help 'cause I've read hundreds of guides and wikies but I'm not really a master!
1) Ur first tip seems a little dangerous! Anyway how can I extract the recovery from stock ROM with dd?! Has to be the phone rooted?! Or adb it's enough?!
2) Ur second tip seems to be better! But where I can take the stock recovery.img?
And then, after replacing it in the CWM zip I've to do something else before flashing zip from sdcard?!
Really thank you for your tips!

The attached file should reflash the stock XXKPU recovery to your 9001. Tested and works with FeaMod 1.4.

Hi wintel.
Thanks for your reply.
Only last question, I promise!!!
May I use the file u posted with every ROM I've installed or it has to be used only with XXKPU ROM?!?!
Sorry, but I quiet new with Galaxy world!!!

mylostnick said:
Hi wintel.
Thanks for your reply.
Only last question, I promise!!!
May I use the file u posted with every ROM I've installed or it has to be used only with XXKPU ROM?!?!
Sorry, but I quiet new with Galaxy world!!!
Click to expand...
Click to collapse
the stock recovery is the same and should be ok for all roms.
this issue was already discussed in I9001 Q&A thread and in the Feamod thread, wintel made it easy for u and gave u a flashable zip,u could replace the recovery.img also through adb or terminal emulator with dd code.(assuming the recovery.img is in the root of internal sd). (keep this code somewhere in case u need it another time)
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13
reboot

odin
just flash a stock rom

pascal1990 said:
just flash a stock rom
Click to expand...
Click to collapse
DID YOU READ THE FIRST POST AT ALL?????
mylostnick said:
.... I know I can return to stock recovery by installing a stock ROM. This is a great thing.
But what about restoring stock recovery without installing the whole ROM?!?! Is it possible?!....
Click to expand...
Click to collapse
Please read before posting

pls help
wintel_mac said:
The attached file should reflash the stock XXKPU recovery to your 9001. Tested and works with FeaMod 1.4.
Click to expand...
Click to collapse
I met a problem which I can not get out my phone SGS i9001. I tried to do an upgrade to v4 android. when he stayed on the phone for almost an hour with the CyanogenMod logo and not do anything. Now when I turn my phone straight into recovery mode. and down the screen I write this: CMW-based Recovery v5.5.0.4 and E: can t mount / cache / recovery / command.
E: can t mount / eMMC. I mention that I can put it in download mode. but every time I tried to do something with odin I failed. please and hope you can help me. Thanks in advance.sorry for my English

Lg Optimus Ku5900/Black Korean Version

Hello Everyone!
I want to know if there's a way to install a cwm recovery on my ku5900,because everytime i install the CWM Rec. through Rom Manager,it always shows the two name devices:LGE IGNITE and LGE MARQUEE.But there is no Lg Black/p970 or ku5900.So please someone help me.I really want to put custom or Cyanogenmod on my ku5900.Thanks:crying:

This is how I installed CWM on my KU5900.
1. install whatever the CWM is. I installed marquee one for mine.
2. get Tantrums CWM Recovery Flasher in your sdcard.
http://forum.xda-developers.com/showthread.php?t=1624565
3. CWM reboot using rom manager.
4. install CWM recovery 5.0.2.6 using Tantrums Flasher.
5. recovery reboot.
There certainly be easier way than this, but anyways, it worked for me.
finalgravity525 said:
Hello Everyone!
I want to know if there's a way to install a cwm recovery on my ku5900,because everytime i install the CWM Rec. through Rom Manager,it always shows the two name devices:LGE IGNITE and LGE MARQUEE.But there is no Lg Black/p970 or ku5900.So please someone help me.I really want to put custom or Cyanogenmod on my ku5900.Thanks:crying:
Click to expand...
Click to collapse

[Resolved] Rom manager has downgraded my CWM recovery !

Hi there,
I used http://forum.xda-developers.com/showthread.php?t=1901191 to root and install CWM recovery on my Note XXLRK.
After reboot, I had CWM 6.0.1.4.
Then I installed app I had in my old phone : rom manager. It told me to flash recovery to be able to use it, so I did it.
It flashed to version 6.0.1.2 !
I tried to flash again with root method below but recovery still to 6.0.1.2 now.
I've heard about brick risk when flashing a rom with this version.
How can I upgrade recovery back to 6.0.1.4 ?
Is it dangerous to flash a rom (cyanogen 9.1) with cwm 6.0.1.2 ?
Thanks

Seems I have no answer yet, I'm sorry I have forgotten to say it was a question !
So here new informations :
I updated with new 2.7 pack (posted by PhilZ today).
Now I have :
- CWM touch 6.0.1.4 when I start with vol up + home + power
- CWM 6.0.1.2 when i select "reboot in recovery mode" in rom manager...
This doesn't really disturb me, I just hope it will not cause problem when I'll flash to cyanogen mod 10 (I'm on stock ICS 4.0.4 right now)
If someone could confirm it will not blow up...
Thanks in advance

As far as I know, rom manager is not compatible for now, so better not use it.

Thanks for your answer.
Should I uninstall it, or can I keep it but just don't use it ?

Nui said:
Thanks for your answer.
Should I uninstall it, or can I keep it but just don't use it ?
Click to expand...
Click to collapse
You can leave it installed.

You can flash only recovery from Phillz, read last 1-2 Page of that thread
Sent from my GT-N7000 using xda premium

dr.ketan said:
You can flash only recovery from Phillz, read last 1-2 Page of that thread
Click to expand...
Click to collapse
I've just read that.
I will not use rom manager anymore, unless I am certain it does'nt make a mess.
If you like bootloops
CM derived ROMs will never run along a stock kernel. You should keep the kernel CM ROM comes with
Click to expand...
Click to collapse
I'm a bit lost with that, I really should read other tutorials, as I don't understand why I can't go from cwm + stock 4.0.4, to cm10

Cwm recovery on GT -I9070

Can someone teach me how to install cwm recovery on my SGSA GT-I9070?

isdian said:
Can someone teach me how to install cwm recovery on my SGSA GT-I9070?
Click to expand...
Click to collapse
go here and follow the guide concerning CWM recovery and book mark it for future reference and post there when you have problems.
Check this out! Links to useful Guides and " Banned " Documentaries ​

isdian said:
Can someone teach me how to install cwm recovery on my SGSA GT-I9070?
Click to expand...
Click to collapse
download temporary cwm and copy it to sd card turn off phone and go to recovery mode by holding volume up +power button and use volume buttons to go up and down there and power button to select and select update zip from sd card and select the zip file you copied in sd card
if you want permanent cwm you must install cocore kernel

What xsenman said lol don't forget to bookmark it lol it's a very helpful thread.

Cwm fort install custom rom
When I want intall custom rom is temporary cwm enough or I need permanent cwm?
Thank you for help

fleury93 said:
When I want intall custom rom is temporary cwm enough or I need permanent cwm?
Thank you for help
Click to expand...
Click to collapse
You do not need permanent. And CM ROMs are stock recovery flashable, so you do not need it. You can install CM10.1, CM10.2, CM11 that way (and probably some other CM based ROMs) :victory:

Update CWM v.6.0.4.7 to v.6.0.4.8
I had thought to make a new thread related to the new version of CWM update. Well, because there are made threads, so I want to express my question. Where can I update CWM v.6.0.4.7 to v.6.0.4.8 specifically for the S Advance? Thanks..

TPD-21 said:
I had thought to make a new thread related to the new version of CWM update. Well, because there are made threads, so I want to express my question. Where can I update CWM v.6.0.4.7 to v.6.0.4.8 specifically for the S Advance? Thanks..
Click to expand...
Click to collapse
You must compile kernel with new CMW to get it I think. We have recovery in the same partition where kernel is.

shut_down said:
You must compile kernel with new CMW to get it I think. We have recovery in the same partition where kernel is.
Click to expand...
Click to collapse
Awesome!!!! "shoots beloved side dish arrived". Which I hope to come with their own! CWM v.4.0.6.8 already embedded in my device..
Thanks TC... :good:

very informative
The information was very useful for I am a brand new s advance user.

How to download this file

Best CWM 6.0.1.1 ODIN Flashable

CWM 6.0.1.1 is best Recovery for P3100/P3110. This help you to install custom roms/themes/ patches, etc
Thanks : XDA-Developers & Google =]
DOWNLOAD HERE

Thank you.

PhnMobileWave said:
CWM 6.0.1.1 is best Recovery for P3100/P3110.
Click to expand...
Click to collapse
So, what exactly makes this particular old version the best? There are several threads covering pretty much all recoveries available for P31xx. If you are looking for the best recovery, check out PhilZ Touch CWM - chances are it will be the last one you ever need.

I agree. I have Philz Touch Recovery as well. It's more advanced and has a simple user interface.