Database Develop

Droid 4 Utility Gingerbread Only

Gingerbread only. If you are on ICS this will not work. Don't try! Get the ICS only tool here: http://forum.xda-developers.com/showthread.php?t=1779810
This is based on the original Droid 4 Utility with edits. Contains the complete GB fastboot files to restore your phone, root, unroot, install voodoo rootkeeper, safestrap of BG, etc. Extract after downloading and doubleclick the script to run.
Download here: Droid4 GB Only.zip - 1.19 GB
MD5 checksum posted at the hosting site.
If you have trouble connecting be sure usb debugging is on and you have the latest moto drivers installed. Moto drivers here: https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/78460/p/30,6720,8302
For menu 1 or 2 your phone must be in fastboot mode first. Enter this by using the tool option or manually by powering off, then hold both volume buttons and pressing power for a few seconds, release the power button and select "ap fastboot".
And of course be sure you have a good usb cable and a full battery if restoring your GB system.
Use at your own risk.

My phone seems to have no Android OS. It also has a dead battery. Plugging in the charger only shows the Motorola Dual Core screen. It won't turn on when connected to the pc. I can still boot to the Boot Mode Selection Menu. I also have a factory cable coming in a couple of days. Will I be able to use this utility using this cable? I can still go into Fastboot connected to the computer with the cable?

badboi_zero said:
My phone seems to have no Android OS. It also has a dead battery. Plugging in the charger only shows the Motorola Dual Core screen. It won't turn on when connected to the pc. I can still boot to the Boot Mode Selection Menu. I also have a factory cable coming in a couple of days. Will I be able to use this utility using this cable? I can still go into Fastboot connected to the computer with the cable?
Click to expand...
Click to collapse
Yes, you can use this utility to reflash .219 to your phone through fastboot. Did the same thing to mine awhile ago and actually used it to reflash stock so I could upgrade to the .217 leak
Sent from my DROID4 using xda app-developers app

I'm having troubles rooting my .219 D4.
I installed the drivers, and according to the Moto device manager, I am up to date. USB Debugging is checked on.
When I try to root it using this tool (menu 3) and the phone is plugged in with charge only mode (using a stock Moto cable), this is what the command prompt spits out. It isn't instant, it's usually done over the course of 2 minutes:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It doesn't actually reboot on its own, and after rebooting manually, there is no SU app in my drawer.
I then tried to use menu 3 while in AP Fastboot mode, by using power and both volume buttons to get into the fastboot menu. I plug in my phone to the computer, and run the script and I get this:
It just hangs there for over 5 minutes and the phone doesn't do anything.
Here is the setup for my latter attempt:
Please help me figure this out. Could the drivers be corrupt? I've uninstalled and re installed the device manager from moto a couple of times. Could my anti-virus be blocking something? I think that the issue stems from a problem in the interface between the device and the computer.
Thanks in advance for any help

Hmm..it looks like the tool is possibly seeing more than one ADB server running. I'd the phone and let it up come up normal. Open up a task manager and go to the process tab. Are you seeing more than one ADB.exe process running? For some reason the tool thinks you have more than one device attached and as a result, isn't sure where to send the exploit.
This doesn't explain the troubles with Fastboot however.

When I plug in my phone and open up the tool, one adb.exe shows up in my task manager. Once I run the root script, I see a second one open. I tried killing it, and it will just open up again. How do I fix this?
If this is on the computer side, why wouldn't it explain the Fastboot problem?

SOLVED: Well, the problem wasn't really solved, but I transferred all the necessary tools to a different PC and rooted the device. So it was an issue with the original computer. MY theory is that it was an issue with the ADB interface from the Moto drivers. I'm purely spitballing on that though.
Thanks for the help anyways, guys. Time to have some modding fun!

Is there a mirror? I can't seem to download this...

Thanks for the utility!
I had some complications with the OTA update and realized that a fastboot back to stock was the only remedy. I couldn't find a linux solution (am I missing something?) so I modified the script to use moto-fastboot32. Worked great, thanks again!

Can some provide a mirror for this link? This isn't downloading...

can anyone throw up a mirror of this or a torrent? my download keeps timing out after an hour....

svrnmnd said:
can anyone throw up a mirror of this or a torrent? my download keeps timing out after an hour....
Click to expand...
Click to collapse
Just another request for a new mirror for this file. I would really like to unroot so I can update to ICS.

I don't think you have to unroot to update... If you've made a lot of changes to your system file, you'll probably have to undo them or fastboot back to stock (this includes installing safe strap)
Sent from my Galaxy Nexus using xda app-developers app

Try the ICS tool, it now has fastboot for ICS.

USB not working but system is alive - how to flash?

Hey guys,
I got a SGS I9000 here from a friend of mine who got it from egay (stupid, but nvm) and I try to fix the device but till now I was not lucky.
I want to upgrade to a newer / higher version but the "faulty" USB makes it very difficult.
Here are the facts:
- The device is running 2.3.3 Gingerbread
- Device Information: GT-I9000HKYDBT + PDA: I9000XWJVI , PHONE: I9000XXJVO, CSC: I9000DBTJV2
- Charging via USB does work, data connection does not work
- Entering Recovery Mode works
- CWM is not installed
- Samsung Kies is installed
- Entering Download Mode works
- External micro-SD Cards are being recognized at Android
- If I connect the device in Windows or Download Mode, the message "USB-Device was not recognized" comes up
What I`ve tried till now:
- three different micro-USB cables (original Samsung, HTC and Motorola)
- two different PCs with Kies installed and not installed
- Tried to flash via Recovery Mode but nothing is shown on the "external SD", even after renaming to update.zip
- Managed to copy files into internal flash but since the "original" Recovery Mode seems to have a verification, the flash process aborts either with
"E:signature verification failed" or "E:failed to verify whole-file signature"
- Odin of course but USB data does not work unfortunately so Odin as well
So the big question for me is:
Is there ANY chance to root/flash the device with the actual difficulties?
Any help or hints are highly appreciated.
Cheers

FaCeOff said:
So the big question for me is:
Is there ANY chance to root/flash the device with the actual difficulties?
Any help or hints are highly appreciated. Cheers
Click to expand...
Click to collapse
you may have to try all these http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 But first break that cycle by removing battery and reinsert after a few min and check phone connection or Mobile Odin is another option

email the recovery file to yourself or upload to dropbox. then download to your phone and flash away!

Don't forget to thoroughly clean your micro usb connector. I once had the same issue with my sgs. Different cables or drivers didn't work. I was about to give up on it, but then fixed it by cleaning it with rubbing alcohol and very tiny dentaid toothbrushes.
Afterwards it worked like a charm. Worth giving a shot, since these connectors collect a lot of dust/dirt over time.

xsenman said:
you may have to try all these http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 But first break that cycle by removing battery and reinsert after a few min and check phone connection or Mobile Odin is another option
Click to expand...
Click to collapse
Thanks for your fast reply.
I did mention this thread yesterday but after installing all different drivers, switching of the PC completely and disconnecting all devices, turning BT ON/OFF, switching between Dev Mode and MSD I'm at the same position as before.
Doesn't matter which cable I use, I just get always the same fking message about Device is not being recognized.
In the meantime, I got a 2nd SGS from a friend of mine which works perfectly after connecting the device with my PC.
It starts immediately with the driver installation and is ready in couple of seconds.
I also tried to put the cable carefully into the USB but it doesn't help either.
Any other suggestions?

FaCeOff said:
Any other suggestions?
Click to expand...
Click to collapse
That would mean, its your USB slot on the phone, that needs a solution, either you have to examine it very closely for damage to resolve it or its internal and you may have to change it.

hey
can u do to download mode??
if u can then upgrade using Odin...
And the uUSB issues cam with my SGS too,but after flashing the firwmare via odin there was no issues...i flashed 2.3.6 ValuePack..
U too can give it a shot..

xsenman said:
That would mean, its your USB slot on the phone, that needs a solution, either you have to examine it very closely for damage to resolve it or its internal and you may have to change it.
Click to expand...
Click to collapse
Yep, doesn't look good and now I'm quite sure this cannot be solved easily.
tchindalia said:
hey
can u do to download mode??
if u can then upgrade using Odin...
And the uUSB issues cam with my SGS too,but after flashing the firwmare via odin there was no issues...i flashed 2.3.6 ValuePack..
U too can give it a shot..
Click to expand...
Click to collapse
Well, as told above, I can enter download mode but USB DATA connection does not work!
So from my understanding, Odin only works if there's a valid connection, otherwise I could flash anything and would not have the problem
Mobile Odin does not work due to the root restriction.
Is there any way to flash another ROM or get the the device rooted with these restrictions?

Stuck on First Screen
Well this is not an answer to the problem. Well am having the same problem as you, just mine is more complicated.
I managed to root using Z4root by copying the APK file on external sd .
I got cmw and entered recovery.
I updated using the CM10-unofficial rom that is in the development forum
I restored the nand that i did in recovery and now the phone is frozen (Stuck) on the first boot screen (Galaxy S GT-i9000 SCREEN)
Now I can go to Download mode but I can't go to recovery mode.
Let me remind you that my USB data connection is not working.
So now I am looking for a solution that would permit me to flash without USB or allow me to go to recovery mode.
Or a tutorial on how to change the usb port myself.
Thanks in advance.

kigordid said:
Now I can go to Download mode but I can't go to recovery mode.
Let me remind you that my USB data connection is not working.
Click to expand...
Click to collapse
As long as you can get to download mode, flashing should solve your problem after you resolve the USB problem , which can be due a number of issues.
Somehow ROM changes and bad flashes, may have pin configuration changes on the phone, (just like changes in combo key functions when you use different ROM) ...so driver changes works for some
So you may have to try all these http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 options to get your USB connection back. But first break that cycle by removing battery and reinsert after a few min and check phone connection , and try those options.

FaCeOff said:
Thanks for your fast reply.
I did mention this thread yesterday but after installing all different drivers, switching of the PC completely and disconnecting all devices, turning BT ON/OFF, switching between Dev Mode and MSD I'm at the same position as before.
Doesn't matter which cable I use, I just get always the same fking message about Device is not being recognized.
In the meantime, I got a 2nd SGS from a friend of mine which works perfectly after connecting the device with my PC.
It starts immediately with the driver installation and is ready in couple of seconds.
I also tried to put the cable carefully into the USB but it doesn't help either.
Any other suggestions?
Click to expand...
Click to collapse
Sorry to repeat my comment again, but if all these drivers aren't working for you, you should check your micro-usb connector. I'm pretty sure the connector is the issue here.
Have you tried cleaning the micro-usb connector on your phone? Don't just blow the dust out or clean it a bit with some paper, but go for a complete and thorough cleaning solution.
Get yourself some dentaid toothbrushes. Get a few sizes. You can get these at your local pharmacy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Get some Cleaning / Rubbing Alcohol. You can find this at a handyman store or your local pharmacy should have this as well.
Dip the toothbrush with some rubbing alcohol. The toothbrush should be a bit moist but not dripping wet.
Start cleaning the connector. You can apply some pressure to clean everything.
If this doesn't work, no harm done. These things are quite cheap and rubbing alcohol and these dentaid toothbrushes come in handy when other electronics go bust.
Honestly, just try it! People always dismiss this solution attempt as a last resort but it's usually the problem fixer.

I fixed mine that had the same problem with a similar technique
Sent from my GT-I9000 using Tapatalk 2

Trying using mobile Odin.

Establish best recowery mod fix and adb on your computer.
without root and probably will not even cwm mobile Odin.

[Easy][GUIDE][UNROOT][RELOCK BOOTLOADER]Flash Stock KDZ Offline LG L90 [All Variants]

First of all, This is not my original work. All credits goes to quangnhut123, who modified this tool for us. I am just sharing this GUIDE for easy flashing KZD to L90
I have tested this method myself and it is working perfectly for me, but it is also possible that it might not work for you for some reasons, so don't panic, just post your problem or whatever error you are facing (please attach screenshot if possible). I or other thread members will try to troubleshoot it. After resolving the problem I'll update this post, so that other members do not face such problem again.
Click to expand...
Click to collapse
PLEASE, USE THIS TUTORIAL AT YOUR OWN RISK, IF SOMETHING WENT WRONG (because of your stupidity) ME OR XDA WILL NOT RESPONSIBLE FOR YOUR LOSS.
Flashing KDZ removes Root and CWM, so you will need to root again.
Flashing KDZ does not wipe your data, but if you get bootloops you need to hard-reset it, so please backup data first.
Click to expand...
Click to collapse
DEVICES FLASHED WITH THIS GUIDE AND TESTED OK: LG L90 (D410)
1. Download KDZ file
To download KZD for you Device GOTO http://lg-phone-firmware.com/index.php?firmware=1
Enter IMEI no of your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enter IMEI Number of your LG Device and press Download Button. It will generate a download link for kdz file.
Be warned the KDZ that your going to use will be auto deleted (may be not) so make another copy
2. Precautions:-
Please temporarily disable any Adblock add-on in your browser and I recommend to check your host file
C:Windows\system32\drivers\etc\host
Enable Show Hidden Files in Folder Option (Don't disable this option until kdz flashing process completes) and Delete the LG Mobile Tool folder (if exist) from
C:\ProgramData\
Remove all other USB devices (external HDD, backup drives, other phones, etc.) and cables connected to PC to avoid issued due to voltage loss.
OFFLINE KDZ FLASHING DOES NOT LOOSE PHONE DATA, BUT YOU MUST BACKUP YOUR PHONE IN ANY CASE.
3. Downloads:-
Download zip file attached below.
4. Install LG Drivers (internet required for this):
Extract B2CAppSetup.zip anywhere on PC and Run B2CAppSetup.exe as administrator. Accept Agreement and a window will appear. Click on OK button (Bottom Right) on instructions. Now connect your LG Device to PC in LG Software mode. B2CAppSetup tool will detect it. Now Click on Install USB Drivers (2nd option on Top Left). It will automatically download and install drivers for your device. If Install USB Drivers options goes grey (Disable) after detecting phone, it means latest USB Drivers are already installed.
After installing USB Drivers please REBOOT YOU PC
Now Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Let windows load any drivers, wait until it finishes. TWO ENTRIES SHOULD APPEAR IN DEVICE MANAGER IF DRIVERS ARE PROPERLY INSTALLED
After installing device drivers unplug the phone from PC
5. Starting The Installation Process:
Extract LG Flash Tool 2014.zip to C:\ drove of PC.
Open LG Flash Tool 2014 folder and run LGFlashTool2014.exe and administrator.
LG Flash Tool 2014 windows will appear.
Select "3GQCT" in Type of Flash.
Select "EMERGENCY" for PhoneMode.
Select your KDZ file in the Select KDZ File box.
Press "Normal Flash" button. (as pic below)
IMPORTANT: Do not change the names of the KDZ files. (They should look like.... "D41010a_00.kdz" or other version in same style.)
Now "Read Phone Information" box will open with blank information, Just press "Start"
Now "Select country and language" small box will open. Here select "Different Country" and "English" and press "OK"
The utility starts the official LG Mobile Support Tool
After a few seconds a screen will appear saying "The phone is disconnected from PC.". Do not click on any button.
Now again connect phone in Software Upgrade Mode: Switch OFF the phone and Press Volume UP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode and click retry button.
Now actual flashing will start, and if your KDZ file is good flashing will end without any issue.
JUST RELAX!! SIT BACK WITH HANDS FOLDED BEHIND HEAD AND WATCH IT HAPPENING.
When it finishes full flashing and phone will start rebooting.
YOU CAN REMOVE CABLE AFTER 100%, AND FLASHING IS FINISHED!!! Close all programs.

In case of Bootloops try this :-
SubliemeSiem said:
This might come in handy for some people too:
I just this method many times to go back to stock, but the last time I tried this my device got into a bootloop. I actually fixed this by shutting down the phone, starting the phone with the power and volume down button pressed, releasing those buttons when the LG logo shows up and immediately pressing them again, then choose to perform a factory reset. After factory reset the phone booted like I expected it to. Might not work for everyone, but is definitely worth a try before you try to flash the KDZ again.
Click to expand...
Click to collapse

Heving Problem.....
Here are some troubleshooting steps :-
Check USB Derives installed properly for L90.
When you connect phone in software upgrade mode with PC, Make sure Device Manager Showing Phone is connected.
Disable any firewall or antivirus if active.
when flash tool prompts to reconnect the phone or saying device not found, just unplug phone==> pull battery out ==> insert it back==> Reconnect phone in software upgrade mode and retry flashing.
If still not working, then quit flash tool => Restart PC => This time first connect phone in software upgrade mode to PC=> then launch flash tool and try to flash .
Disconnecting and reconnecting phone for several times could also helpful.

This one also reserved

How when device position is softbrick or bootloop..? And debuging not aktif... ?
Thanks
Sent from my LG-D410 using xda premium

Thank you! We now have the offline fix!
Sent from my LG-D415 using XDA Premium 4 mobile app

rozyid said:
How when device position is softbrick or bootloop..? And debuging not aktif... ?
Thanks
Sent from my LG-D410 using xda premium
Click to expand...
Click to collapse
This flashing process should recover phone from softbrick and bootloops. Try flashing KDZ in software upgrade mode :fingers-crossed:

This also works for the Optimus L9....in case anyone wants to know. I used this on that one and my Optimus L90. Thank you @gdjindal.
Sent from my LG-D415 using XDA Premium 4 mobile app

LaDY Vengeance said:
This also works for the Optimus L9....in case anyone wants to know. I used this on that one and my Optimus L90. Thank you @gdjindal.
Sent from my LG-D415 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ya LaDY Vengeance, This guide will work with every LG Phone. :highfive:

What latest firmware for D410?, on my phone V10b-ESA-XX ( for indonesian region).
Can i flashing used firmware D410 Europe region...?
Thanks
Sent from my GT-I8160 using xda premium

rozyid said:
What latest firmware for D410?, on my phone V10b-ESA-XX ( for indonesian region).
Can i flashing used firmware D410 Europe region...?
Thanks
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
In india it is V10c-IND-XX and I am unable to understand what are you asking about firmware flashing.
Sent from my LG-D410 using XDA Premium 4 mobile app

Hi OP,
1 question...
I went to the download site and put my IMEI for 1st number,,, i got a download file... Indian..
But i put 2nd imei also and second file i am downloading, but it has same file name.....
SHould i download both or only 1 will do ??
thanks
Greg

gregferns said:
Hi OP,
1 question...
I went to the download site and put my IMEI for 1st number,,, i got a download file... Indian..
But i put 2nd imei also and second file i am downloading, but it has same file name.....
SHould i download both or only 1 will do ??
thanks
Greg
Click to expand...
Click to collapse
I am surprised by your question
But download only one KDZ file, it doesn't matter what IMEI number you use to generate the download link.
With both IMEI numbers the same link will be generated, so download with any link but only for once.

I want a v3.4.x kernel for the LG OPTIMUS L90 (D415) that has iptables/netfilter built in. Then I can get SSH tunneling to work.
With my Sprint Epic I would use a tool called Odin, is the method of flashing a kernel to this phone the same? Can anyone get me the instructions on how to do it properly? I'd assume it is much different. What is this KDZ thing about? How come there are no [KERNEL]'s or [ROM]'s posted in this L90 forum?

gdjindal said:
In india it is V10c-IND-XX and I am unable to understand what are you asking about firmware flashing.
Sent from my LG-D410 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Because Display in myphone FLICKER.. and LG service center its wrong of software, meybe i used another version and flicker is fixed.
Sent from my LG-D410 using xda premium

rozyid said:
Because Display in myphone FLICKER.. and LG service center its wrong of software, meybe i used another version and flicker is fixed.
Sent from my LG-D410 using xda premium
Click to expand...
Click to collapse
Buddy I am still not able to understand you

kinesis said:
I want a v3.4.x kernel for the LG OPTIMUS L90 (D415) that has iptables/netfilter built in. Then I can get SSH tunneling to work.
With my Sprint Epic I would use a tool called Odin, is the method of flashing a kernel to this phone the same? Can anyone get me the instructions on how to do it properly? I'd assume it is much different. What is this KDZ thing about? How come there are no [KERNEL]'s or [ROM]'s posted in this L90 forum?
Click to expand...
Click to collapse
Hello Kinesis,
Here is link to LG OpneSource Code Distribution Site of D415
https://www.lg.com/global/support/opensource/opensourceList?types=NAME&search=D415
Because I have never flashed kernel to any phone, so I also don't know how to flash kernel to LG Phone. KDZ is extension of LG Phone's Stock Roms or Stock Firmwares (Eg. : V10C_00.kdz) . To flash a kdz file you need LG Flash Tool (Download from Attachments)

Has anyone tried this with L70 D320n?

Reasec said:
Has anyone tried this with L70 D320n?
Click to expand...
Click to collapse
Yes, It should work. Give it a try :good:

Stuck at 4%, every freakin time. Tried it like 50x.
One question.. FW for my IMEI is D32010A_00 which is already in my phone, but i want to flash international version 10c. Is this even possible?

USB connection not working!

Hello all,
I recently bought the Galaxy S3 LTE (I9305) and the phone only charges when connected to my PC, it beeped and installed some drivers but it's still the same. Take a look at that picture (it only shows this when i connect the phone):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

limnaln said:
Hello all,
I recently bought the Galaxy S3 LTE (I9305) and the phone only charges when connected to my PC, it beeped and installed some drivers but it's still the same. Take a look at that picture (it only shows this when i connect the phone):
Click to expand...
Click to collapse
Do you have the drivers for Galaxy s III, 9305 installed on your computer?I think that you don`t have the drivers installed and the message is related to your old terminal.Install Kies3 and you will have the right drivers.:good:

viktorak said:
Do you have the drivers for Galaxy s III, 9305 installed on your computer?I think that you don`t have the drivers installed and the message is related to your old terminal.Install Kies3 and you will have the right drivers.:good:
Click to expand...
Click to collapse
I have installed Samsung Kies and Samsung USB Drivers on my computer. I didn't exactly understand you?And I'm running Win7 x64, I've tried it with another cable and another laptop.

Wich version of Kies have you?You need version Kies 3,when firmware is 4.3 or higher.

viktorak said:
Wich version of Kies have you?You need version Kies 3,when firmware is 4.3 or higher.
Click to expand...
Click to collapse
Oooh, i have 2.6.3....
I will change it and write to you.

viktorak said:
Wich version of Kies have you?You need version Kies 3,when firmware is 4.3 or higher.
Click to expand...
Click to collapse
Still nothing...
Yesterday i managed to update to 4.4.4 official through odin and after that i flashed AOSP ROM. Now USB connection and even Odin doesn't detect my device ( No beep on PC too)

limnaln said:
Still nothing...
Yesterday i managed to update to 4.4.4 official through odin and after that i flashed AOSP ROM. Now USB connection and even Odin doesn't detect my device ( No beep on PC too)
Click to expand...
Click to collapse
delete everything, from drivers to odin to everything related to samsung. Then try again. Also change usb cable, change usb port or try on another pc

klemen241 said:
delete everything, from drivers to odin to everything related to samsung. Then try again. Also change usb cable, change usb port or try on another pc
Click to expand...
Click to collapse
OK, BTW I've tried on another PC and different cable.
And should i try to go back to 4.4.4 stock or an older version of touchwiz?

limnaln said:
OK, BTW I've tried on another PC and different cable.
And should i try to go back to 4.4.4 stock or an older version of touchwiz?
Click to expand...
Click to collapse
maybe, but its not really a high chance its roms fault

klemen241 said:
maybe, but its not really a high chance its roms fault
Click to expand...
Click to collapse
Samsung's USB connection is very random, i got the phone with 4.3 and after a few restarts Odin/PC managed to see my device in download mode and i was able to update to 4.4.4. For now, i returned to 4.4.4 touchwiz - nothing is working (I've used MobileOdin to flash it)

limnaln said:
Samsung's USB connection is very random, i got the phone with 4.3 and after a few restarts Odin/PC managed to see my device in download mode and i was able to update to 4.4.4. For now, i returned to 4.4.4 touchwiz - nothing is working (I've used MobileOdin to flash it)
Click to expand...
Click to collapse
yea strange. I never had this problem. I bought myself a dock from ebay for few dollars and my connection works all the time. I do use nokia usb not samsung cable. It may depend on lenght of usb cable too

I think this may be a soft USB brick.Very very possible ..Cann you enter in Download mode?

viktorak said:
I think this may be a soft USB brick.Very very possible ..Cann you enter in Download mode?
Click to expand...
Click to collapse
Yes, i can, but the PC doesn't detect it now, i managed to flash 4.4 with it yesterday...

Hi,mate,have you tried to do Factory reset from recovery?

viktorak said:
Hi,mate,have you tried to do Factory reset from recovery?
Click to expand...
Click to collapse
Yes, I've done it...

do you got your pc set to automatically search on the internet for drivers?

limnaln said:
Yes, I've done it...
Click to expand...
Click to collapse
Have you tried uninstalling everything Samsung related from control panel and then going into device manager and uninstalling Samsung drivers (they should be under phone, usb mass storage or other when you plug the phone in) and then letting the phone install drivers by itself?

I've managed to get recognized by Odin by just plugging the USB cable in the phone before it says Downloading... (In the warning menu).
But now, after 6 hours it can't be recognized again.... DUMB.RANDOM.****

I managed to get root and flash recovery, then I flashed a ROM. I figured out that i can use Mobile Odin instead of PC Odin, but i still need to fix that qualcomm usb driver error (I may go to a service today)... :fingers-crossed:

limnaln said:
I managed to get root and flash recovery, then I flashed a ROM. I figured out that i can use Mobile Odin instead of PC Odin, but i still need to fix that qualcomm usb driver error (I may go to a service today)... :fingers-crossed:
Click to expand...
Click to collapse
:fingers-crossed: 4u!

[GUIDE]How unbrick your L5 from a softbrick

After my friends ask me so much for me to do this tutorial for the sake of L5, I decide to do.
If you see your L5 does not start the system, it is the LG logo, follow a tutorial below according to your case.
Note that this guide helps only in cases of softbrick. In cases of hardbrick, I recommend you go to a technical assistance.
If your device is in the boot animation forever:
Probably you should have modified the system and is very easy to recover. Just look for the ROM that you were using normally occur before it and reinstall.
If your device is not out of the LG logo and/or not go to recovery:
1 - Download the drivers here and install: http://depositfiles.org/files/8nbpilxsh
2 - Download the stock ROM here: http://lg-phone-firmware.com/index.php?id_mod=12
Download according to your device!
3 - Go to the download mode.
If the baseband is V10, remove the battery and insert it again (don’t turn it on!). Press and hold volume up button and volume down buttons and connect the device to your computer while holding the buttons.
If the baseband is V20, remove the battery and insert it again (don’t turn it on!). Press and hold volume down an connect the device to your computer while holding the buttons.
If it was not for the recovery, the stronger hold buttons! Worked with me
4 - Download the KDZ updater here http://www.unclenet.de/files/KDZ_FW_UPD_EN.7z
The file contains msxml.msi. Install it first before running the KDZ updater
5 - Start the program.
Leave the options as follows:
Type: 3GQCT
Phone Mode: DIAG
KDZ file: navigate to the file location. KDZ downloaded in step 2 and select.
6 - Click on "launch software update".
The process will take a while. No way, do not disconnect the device from your computer!!!
7 - If still not start, go to the recovery and format
To go to the recovery, will depend on the installed ROM. Each ROM is different. I do not know how to enter the recovery of all ROMs.
When you go to the stock recovery, will automatically format.
(Special case) If your screen looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do as if you were standing in the logo of LG. However, in this case, will not appear on the screen written this in download mode.
To go in download mode, you will have to have plenty of patience to get out of this situation.
Try:
Hold the volume up and connect the PC;
Hold the volume down and connect the PC;
Hold the volume down and up at the same time and connect to PC.
You should try one of these at a time and wait about 10 seconds. While the screen does not look like this, keep trying and holding the stronger buttons.
View attachment 3726726
Make sure it is connected. Go on the control panel, Hardware and Sound, Devices and Printers. If not appear, uninstall the drivers in the device manager and reinstall it.
After that, you just have to install the ROM on KDZ updater.

its a softbrick when it comes and its easy thats right,but whats when we have a real hardbrick?
--SIGNATURE--

-CALIBAN666- said:
its a softbrick when it comes and its easy thats right,but whats when we have a real hardbrick?
--SIGNATURE--
Click to expand...
Click to collapse
I don't know

Amazing man, I appreciate your work

Jonas Cardoso said:
Amazing man, I appreciate your work
Click to expand...
Click to collapse
thanks

Hard brick is when your device won't react to any of your actions.

n0b0dy666 said:
Hard brick is when your device won't react to any of your actions.
Click to expand...
Click to collapse
So all I said is to recover from a soft brick?

Antonio Almeida Filho said:
So all I said is to recover from a soft brick?
Click to expand...
Click to collapse
Yes.
Soft brick; bootloop etc.
Hard brick; phone wont turn on & can not access recovery/download mode.

rhystagram said:
Yes.
Soft brick; bootloop etc.
Hard brick; phone wont turn on & can not access recovery/download mode.
Click to expand...
Click to collapse
Therefore, I have nothing to say about hardbrick. In this case, I would recommend just taking the phone into a technical assistance.

Antonio Almeida Filho said:
Therefore, I have nothing to say about hardbrick. In this case, I would recommend just taking the phone into a technical assistance.
Click to expand...
Click to collapse
Btw... How did this thread ended in XDA Home Page??:silly:

Hardbrick is relatively easy too (just one temporary pull down on eMMC data line, then emergency downloader from SoC is available over usb), though for writing guide/testing software i would need actual genuine hardbrick (mobo of l7 or enough of l5)
But even if i write guide, you will still need to have full eMMC backup, any other way while not impossible, violates xda rules. Otherwise you will have no IMEI (though that state could be still useful)

Unfortunately this sock doesn't support QDL 9008 from what I know. The title is just misleading. There is no hard-brick here.

It does since forever:
MSM7k ARMv7 - over USB
any before - over UART

Guys, I never said that this tutorial is about hardbrick. You probably should have seen it http://www.xda-developers.com/xda-external-link/unbrick-lg-optimus-l5-from-hard-brick/ . I think you should discuss it there, with the guy who spoke that it is a hardbrick guide.

neutrondev said:
Unfortunately this sock doesn't support QDL 9008 from what I know. The title is just misleading. There is no hard-brick here.
Click to expand...
Click to collapse
I DO NOT told at any time that was hardbrick. I'm going for the title which is softbrick. This so good?!

Antonio Almeida Filho said:
I DO NOT told at any time that was hardbrick. I'm going for the title which is softbrick. This so good?!
Click to expand...
Click to collapse
True. My bad mate.

Antonio Almeida Filho said:
Guys, I never said that this tutorial is about hardbrick. You probably should have seen it http://www.xda-developers.com/xda-external-link/unbrick-lg-optimus-l5-from-hard-brick/ . I think you should discuss it there, with the guy who spoke that it is a hardbrick guide.
Click to expand...
Click to collapse
Apologies for the inconvenience caused. I should try and work with more coffee. It was not my intention to cause such harm. The post has been removed.

a.cid said:
Apologies for the inconvenience caused. I should try and work with more coffee. It was not my intention to cause such harm. The post has been removed.
Click to expand...
Click to collapse
Do not get this message as irony, but thank you for that.

LG E 610 Softbrick tried everything MPT Driver fails to load
hi,
i have an LG Optimus L5 (LG-E610) here, it used to have a Stock Android 4.0.3 of nov 06-2012 on it and i tried to put a custom 4.4.4 ROM on it. i had root, Philz Recovery installed and flashed with it: 20 baseband, ROM, gapps, in that order. after it was finished-> reboot system. but the fon would not boot properly and show my a dizzy screeen. after i installed LGMobileDriver_WHQL_Ver_4.2.0.exe and tried flashing V10B_00.kdz with the KDZ_FW_UPD_EN.7z tool. ti said "phone not found" no matter in wich way i used it. after this the fon would not be properly recognised by the win7 x64 pc anymore. the "Android Net MTP device" driver fails to install. some mpt driver used to work before.
after this i also worked with the lg mobile tool und the lg 3.8 mobile driver. uninstalled drivers, used other pcs, virtual oss, lg pc suite. i tried every possible combination of push buttons (i believe) and did with and without battery in the fon. the problem remains. MTP device driver fails to install.
WHAT TO DO?

i have an old device, i cant access the download mode or recovery mode just a white screen, this happen after i was trying to flash a custom recovery (twrp). any have an idea? i just need to enter the download mode, and the kdz wont recognize the device