A word about how this thread came about:
Our highly respected developer Utacka got fed up with 4.2.1 ETA inquiries, feature requests and questions posted by those with no inclination to read or search anything, not even the OP.
We need to let Utacka have some respite from those in order to not lose him altogether.
So, I'll be compiling Utacka's ParanoidAndroid nightlies for him and Utacka will be releasing a weekly build for the time being.
Downloads here are and will always be untouched Utacka PA builds compiled from his source at Github. Nothing added, nothing subtracted, nothing modified.
Roms here and Roms in the original Utacka ParanoidAndroid thread are identical, you can download and flash any of them, and you'll be getting the same Utacka PA experience.
Let us begin.
Utacka said:
Android 4.1.2
ParanoidAndroid 2.56
Source compiled
You can follow the PA-JB Progress for Galaxy Nexus in this thread: http://forum.xda-developers.com/showthread.php?t=1619582
Follow Paranoid Android officially on:
Facebook : https://www.facebook.com/paranoidgoogle
Twitter : https://twitter.com/paranoid_team
G+ : http://goo.gl/e3tKJ
Click to expand...
Click to collapse
Utacka said:
Prologue
This is NOT a port.
This is the FIRST PA ROM that is built from source for GT-N7000 and I'm providing these builds on a nightly basis when there is changes from CM or PA.
Click to expand...
Click to collapse
Utacka said:
Githubs:
https://github.com/Utacka
https://github.com/ParanoidAndroid
https://github.com/CyanogenMod
Click to expand...
Click to collapse
How to install Utacka ParanoidAndroid Rom.
It doesn't matter which Rom you are coming from, all that matters is the kernel you are on.
If you are running any CM-based kernel (CM9, CM10 or CM10.1)
If you are running any Gingerbread kernel
If you are running Hydracore or HydracoreNirvana
If you are on Franco ICS kernel newer than v3
If you are on Speedmod ICS kernel newer than v3
If you are running PhilZ kernel v3.99 or newer
Code:
1. download ParanoidAndroid Rom and Gapps
2. place them on your SD card
3. reboot into recovery
4. wipe data/factory reset
5. wipe cache and dalvik
6. flash the Rom
7. flash Gapps
8. reboot
If you are on any PhilZ kernel older than v3.99
Code:
1. download any CM10 kernel from Kernel Repository
2. download ParanoidAndroid Rom and Gapps
3. place all three files on your SD card
4. reboot into recovery
5. flash the CM10 kernel first
6. stay in recovery, go to advanced/reboot recovery
7. wipe data/factory reset
5. wipe cache and dalvik
6. flash the Rom
7. flash Gapps
8. reboot
Kernel Repository is here.
If you are running a kernel not mentioned above, go here and read extra carefully before doing anything.
If you are already on any previous Utacka ParanoidAndroid 2.56 build
Code:
1. download the new build and Gapps
2. put it onto your SD card
3. reboot into recovery
4. wipe cache and dalvik
5. flash the Rom
6. flash Gapps
7. reboot
ROM SCREENSHOTS
DOWNLOADS
pa_n7000-2.56-20121230-Utacka.zip
pa_n7000-2.56-20121231-Utacka.zip
pa_n7000-2.56-20130101-Utacka.zip
pa_n7000-2.56-20130102-Utacka.zip
pa_n7000-2.56-20130106-Utacka.zip
Bangsti's FTP mirrors:
FTP Server 1
FTP Server 2
gapps-jb-20121011-signed.zip
A final word: please consider donating Utacka for all the tremendous work he has done and is still doing to make all our Notes faster, smoother and better looking.
Do not, I repeat, do not donate to me. What you are enjoying here is Utacka's work, not mine. I just deliver his craftsmanship to you, that's all.
A word of caution to everyone:
This thread will not be allowed to degenrate into a post garbage that has nearly driven Utacka away.
Ask for 4.2.1 ETA, you will be reported.
Ask "How I flush this...?", you will be reported.
Demand features....you guessed it, you will be reported.
Discuss Thor kernel/recovery, you will be reported.
Complain about problems without submitting a logcat/last_kmsg, you will be reported.
Report issues that have already been reported and discussed ad nauseam, you will be reported.
Ask for S-apps to be included in the Rom, you will be reported.
To cut the long story short, this thread will be heavily moderated, so watch your step.
You have been officially warned.
Furhermore, officer in command of this thread is AA1973. The minute he tells Utacka or me he's had enough, this thread is closed, so don't make him mad.
Reserved for ...my personal thank you @utacka for providing countlessly this amazing ROM!
Reserved for FAQ - frequent annoying quastions™
You're new to Paranoid Android or it has been a long time since you last flashed PA?
Then, feel free to take the quick and guided tour, which will take only 2 minutes.
Go into settings > PA settings and hit the Help tab.
There you'll find the guided tour and the different layout possibilities well explained.
You're invited to replicate the layout/density feature at best with YouTube, as it has the upmost possible combinations.
Furthermore, you'll find all members of the PA team, including molesarecoming and D4rkn3Ssys, the founders of PA.
General, for some members important, question about this version by utacka and the PA Version by imilka?
Utacka PA = Nightly basis (unofficial PA way)
imilka PA = PA version bumps (official PA way)
That's it, no other difference at all.
Nightly basis signifies that you can flash utacka's version on a daily basis, because as soon as CM10 (=the base) changes, utacka updates as well. If you can cope with this method of flashing on a daily basis, then this is your place. If this means too much hassle for you to keep up, then you should reconsider your choice and probably go for imilka's version.
Some FAQ
Screenshot not working:
Either the native functionality (Volume down + Power button) or long press power button and then choose "Screenshot".
If the latter is not available yet, activate it in System settings > System > Power
I seem to have no status bar (notification bar)
Long press power and click "Expanded Desktop".
Always wondered, what this is useful for? Just use phone layout and navigation bar at the same time and choose Camera. You'll see 3 little dots (the navigation bar symbols) shining through. You can avoid it by this function.
Other terms of use: video playing or within games, where notification bar won't disappear automatically.
My Google account is lost and play store doesn't work!
You have forgotten to flash GApps as well.
Flash ROM
Flash GApps
That's the standard procedure after updating PA version...even on a nightly (daily) basis!
RIL Crashes
Media Scanner
I do really want to use Inverted GApps -> personally, I use JusTun Beans inverted GApps
Some rules
1. I'm going to post my question without doing a search. Fine, but you'll just get made fun of, or infracted by one of the mods who use this mod. Searching is the first rule of XDA. "1. Search before posting. Use one of our search functions before posting, whether you have a question or something new to share, it's very likely someone already asked that question or shared that news."
Some hints for XDA-app or tapatalk Users: the search function within the app is very limited!
If you really want to search, just hit on any post and then the menu button in order to choose web view. Then, within the browser of your choice, you can easily do the search you want. There is the possibility called "Search this thread"...
2. People have a bad attitude in this thread. You broke rule #1, didn't you?
3. Do I really have to do a full wipe while coming from another ROM? No one is going to stand over your shoulder and make sure you do, but don't expect help if you don't.
4. My recovery freezes, gives me some other weird error (Status 7, or similar)
Redownload ROM (GAPPS) and flash again as you have encountered maybe a bad download.
Checking MD5 helps.
Tool to check MD5 is e.g. Solid Explorer Beta2
_________________________________________
Q: Where are S-apps (Note, Memo, Planner etc)?
A: They require TouchWiz framework to work, so you will not find them here. There are alternatives to
S-apps in Playstore.
_________________________________________
Q: I'm currently running xyz kernel. Can I flash this Rom safely?
A: Go here to find out.
http://forum.xda-developers.com/showthread.php?t=1857556
_________________________________________
Q: How do I flash this?
A: This is how. #OP
_________________________________________
Q: Oohhhh - battery drainage! (battery drains,...)
A: Have a look here:
_________________________________________
Q: Recovery aborts flashing Rom or Gapps or kernel and displays error code "status 7"?
A: You most probably have a bad download. Redownload Rom/Gapps/kernel, check MD5 and try again.
_________________________________________
Q: Flash went through OK, but now I can't sync calendar/contacts/Gmail, there's no option to setup my
Google account, Playstore won't start, where is my Picassa...?
A: You either forgot to flash Gapps, or had a bad Gapps zip (if you had flashed it).
_________________________________________
Q: Playstore says I have no apps, and I purchased them ages ago, or claims that my apps are incompatible
with the Note...?
A: Go here to find the solution to your problems.
_________________________________________
Q: Can I flash some other kernel on this Rom?
A: You can, but if something goes wrong don't post your problems here. Go to the kernel thread instead.
_________________________________________
Q: A system app keeps FCing. What can I do?
A: Go to Settings/apps and clear the app's cache and data, reboot. If that doesn't help, try to dirty reflash the Rom (just wipe cache and dalvik).
_________________________________________
Q: Gallery only shows grey squares, but no pictures, wth?!
A: Clear cache of gallery and let the media scanning process run again. That should do it!
_________________________________________
Q: Where do I find new themes?
A: Either in PlayStore or here is a thread dedicated to CM10/AOKP themes
http://forum.xda-developers.com/showthread.php?p=29455970
_________________________________________
Can we at least pull your leg by asking why SMemo is not included?
Kortxero said:
Can we at least pull your leg by asking why SMemo is not included?
Click to expand...
Click to collapse
Thanks for reminding me to include that in the 2nd post.
BTW, you are reported.
No, as it is already written in the freaking annoying quotes section as being "impissible™" on this Roma
Hence...
The wall of shame:
where (similar: what) is the OP?
Click to expand...
Click to collapse
Is S-Memo works on this room?
Click to expand...
Click to collapse
AA1973 said:
No, as it is already written in the freaking annoying quotes section as being "impissible™" on this Roma
Hence...
The wall of shame:
Click to expand...
Click to collapse
Mentioning it twice won't hurt anybody.
How about posting all the idiotic comments and 'please help me's in the old thread? That should keep this one relatively clean. :thumbup:
One question about Goo Manager: will your compilations appear as goo updates of Utacka's builds? Actually I'd rather not as I find goo notifications unnecessary.
Btw, how many roms are you currently building ? You're going to fry your Note if you keep flashing like that!
Envoyé depuis mon GT-N8000 avec Tapatalk
sudisk said:
One question about Goo Manager: will your compilations appear as goo updates of Utacka's builds? Actually I'd rather not as I find goo notifications unnecessary
Click to expand...
Click to collapse
Have I been that unclear in the OP? What you're flashing here is Utacka's ParanoidAndroid.
The only difference is that it's been compiled on a different PC.
Thanx to Utacka, Chas and AA :good: Even if I will stick with Asylum, I really appreciate your effort. Best luck with your project, and may this fred never see a "Hap, Status 7 !!111!!!1!" quastion :fingers-crossed:
Cheers, Markus
chasmodo said:
Furhermore, officer in command of this thread is AA1973. The minute he tells Utacka or me he's had enough, this thread is closed, so don't make him mad.[/CENTER]
Click to expand...
Click to collapse
Good luck to you Mister Alcoholic Anonymous... Hopefully Chas' OP will keep stupid questions away
Well, we all try our very best to keep it clean-and simple.
Tell my now! How many toogles this room has? Lame =< 23 Tongles !!1!!1!!!eleven1!!!one!!11
It has Spenotememo?
Cheers, Markus
Very well ..However if moderators educate the users about how to obtain logcat in an easy way and submit in the OP, This will help novice to report the problems in a meaningful manner .
Sent from my GT-N7000 using xda app-developers app
Vishal_Pratap singh said:
Very well ..However if moderators educate the users about how to obtain logcat in an easy way and submit in the OP, This will help novice to report the problems in a meaningful manner .
Click to expand...
Click to collapse
Srsly?
http://lmgtfy.com/?q=how+to+logcat
people are forgetting that this is development section...i think too much nonsense post and unhelpful to rom dev inputs stray away the devs...its frustrating for users who take the time to help out seeing posts by others who cant even take some minimal time to even read the OP or google search...come on mates this is xda and not sammy customer service...utilize your brain power so as others wont go on tearing up your intellect...persevere to learn...
as always props to chasmodo for keeping up with the note...always appreciated mate...and of course to our devs who work tirelessly with dedication (utacka, eybee, etc)...we always respect and value your work guys...and thanks for staying...
tehehe people got really scared wow .. 18 replies only lol
downloading and testing , thank you in advance
Sent from my GT-N7000 using xda premium
Weill said chasmodo.
Sent from my GT-N7000 using xda app-developers app
Reading the 2nd post, I suddenly caught myself standing in "attention" :good:
P.S. For those with commandlinephobia -
https://play.google.com/store/apps/details?id=org.jtb.alogcat
Related
CM7.1 Nightlies
A friendly reminder from slayher:
"Everyone needs to remember that the CM team has made no releases yet. It's labeled RC0, and new code is going in everyday. Sometimes things are going to break, sometimes features are going to be removed, then added, then removed, then added back. Sometimes regular apps may just not work (adfree) because this a new version of android using new and updated API's. Keep that in mind. To the CM team, you are flashing ALPHA software. Not beta, not a Release Candidate.
Just to restate some stuff to the people who didn't read the entire Crackflashers' Thread.
This kernel has been patched with a backport of the .35 kernel in order for USB tethering and mounting to work. Flash a different kernel, and those features break. Period.
Second, the kernel that is provided is what we have found to be the most capable, but most stable kernel for the most people. We are not using highly customized kernels with every acronym you can think of because we are going for maximum compatibility.
Third, make sure you have updated HBOOT (.92), radio images (2.15 series). The newer seem to be working much better.
Fourth, if you hate this and think it's slow, great, don't use it. If you love it, and think it's the best thing to happen to your phone, great, use it. The point here is choice, run what ROM has the features and speed you want. If you want these features, but something isn't working for you, ask for help from others running the ROM. And don't forget it's still ALPHA."
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The DInc Build Bot
(It's currently hiding)
Merged/Changelog
Per Nightly Changelog
Nightly ROM
Nightly Mirror
Gapps
Gapps Mirror
CyanogenMod 7 for the HTC Incredible :: V7.1.0 (9 Oct 2011) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Kernel
A refresher from slayher:
"This (included/stock) kernel has been patched with a backport of the .35 kernel in order for USB tethering and mounting to work. Flash a different kernel, and those features break. Period.
Second, the kernel that is provided is what we have found to be the most capable, but most stable kernel for the most people. We are not using highly customized kernels with every acronym you can think of because we are going for maximum compatibility."
Currently, there are a few alternatives that don't break things.
Incredible list of 2.6.37.xx kernels by galaara98
Universal kernel mirror by galaara98
[KERNEL] Incredikernel by chad0989
[KERNEL] Tiamat by Cayniarb
[KERNEL] Invisiblek's
[MOD]viperMOD for AOSP Kernels by -viperboy-
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Themes/Mods:
Careful with these. They may work with one version, but not the next. As always, nandroid first.
[THEME]DARKGINGER "formally DarkFroyo" by djdarkknight96
[THEME]GB: The way it should have been | [MODs] Battery mods by AdhvanIt
Beautiful Icon Theme by Adhvanit
[THEME]Minimalist by david1171
[THEME]Honeycomb by haxzamatic
[THEME]Rover's Mix by rover.prince
[THEME]RedBread by slayher (whoever that guy is) is available on the Market for free, and a donate version. *hint, hint, nudge, nudge*
[SPLASH]CM7 Splash Screen by lioryte
[MOD]CM7 Lockscreen Rings by synisterwolf and IAmTheOneTheyCallNeo
[MOD]Battery mods by mattyg151
[MOD] Mattyg, UserJF, Battery Mods, AudioBoost, Camera Shutters, Data Throttle, More! by userjf
This one will force close your Mobile Network Settings:
[MOD]Data Throttle Remover by driphter
More info at: [MOD] Uncapped Data For Your ROMS (Skyraider, Virtuous, OMGB, ETC)
[THREAD] T-Mobile Theme Chooser For CM7 / Percentage icons by aalopez10
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Known Issues/Bugs
Per slayher: "Sometimes things are going to break, sometimes features are going to be removed, then added, then removed, then added back."
Just because it works in one build, doesn't mean it's going to work in the next.
TV-Out doesn't work on CM7 or any AOSP ROM
720P video recording
Blue tooth acting wonky (there's a fix listed below in the FAQ)
Sometimes downloads appear unsuccessful
Theme Chooser causing WL widgets to disappear
FAQ
Q: What's the ETA on....about how long till...when can I expect....?
A: The only rule of CyanogenMod: You don't ask for ETAs.
Q: Now that the Ice Cream Sandwich SDK has dropped, we're getting a port, right?!
A: Take a look at this PSA by Keyan Mobil
Q: What's this CM7.1, Android 2.3.7 business?
A: The nightlies are built on CM7.1, which is Android 2.3.7, while the RC's (so far) are built on Android 2.3.3. Do NOT downgrade without a full wipe.
Q: How do I install CM7, coming from non-CM7?
A: From ciwrl, Head Moderator at http://forum.cyanogenmod.com/ "As we start the RC phase of CM7, many of you are now taking the leap from CM6 stable to the new RC's. Some of you may be able to get away with doing this without a wipe; however, most of you will not be that lucky. Differences in the rom, files system, and even Google Addons will likely throw most of you into boot loops. Therefore, here is my recommended upgrade path:
1) Nandroid backup your current rom
2) Update your recovery to the latest available (CWR is my choice)
3) Format system via recovery
4) Wipe/Factory reset
5) Flash CM7 then Google addon
If any of you have data that you must absolutely save, then and only then should you use Titanium backup (or other backup apps) to restore your data. Please be sure not to restore any data to /system using these apps, as this will mostly likely corrupt your ROM and/or Market."
Granted the above method says from CM6 to CM7, but it pretty much applies to any non-CM7 to CM7.
Q: How do I update from RC to nightly, stable to nightly, nightly to nightly, (basically, forwards) etc?
A: The safest (definitely not the only, but my preferred) way is
Download ROM with Rom Manager Premium.
Do not install with Rom Manager
Reboot into recovery.
Make a backup/nandroid (to be safe)
Wipe Cache
Wipe Dalvik
Install Zip from SDCard
Nightly at /sdcard/clockworkmod/download/mirror.teamdouche.net/get/inc/
/Gapps at sdcard/clockworkmod/download/goo-inside.me/google-apps/
Reboot
Enjoy
Q: How about that 720P? I hear it's handy.
A: Per slayher, "720P recording will not be coming to CM7 at this time. We *MAY* see it later if we get an HTC GB leak, using an MSM device (aka not omap). But for now, if you HAVE to have 720P recording, stick with CM6. The issue is that GB uses stagefright, and the hack it took to get 720p in CM6 wont work with stagefright. (it was done in opencore.) This is why we cant get it. The current driver implementation we have to work with is just not capable. So there you go, you can stop wondering/asking/hoping."
Q: How about CWM3/5? I'm having a problem where....
A: Try deleting the current recovery first.
Q: How do I fix the space error that pops up when I try to install some apps?
A: Per slayher, "If you get a Space error trying to install apps, just try installing again. I have encountered this error also and it is not related to actual free space, (unless you have a cubic crap ton (crapton * crapton * crapton) of apps installed)."
Q: How do I disable the shutter sound?
A: Per mattyg151, "I used root explorer to rename /system/media/audio/ui/camera_click.ogg to camera_click!.ogg ... no more camera shutter sound."
There is also an option at Menu > Settings > CyanogenMod setting > Sound > Mute camera shutter
Q: How do I increase the WiFi scan time to save battery life?
A: Per karnovaran, "One way to reduce battery drain is to increase the WiFi scan interval. It's set to 45 seconds, meaning it will scan every 45 seconds. If you change it to something like 90, obviously it will scan less often and use less battery. To do this, you have to edit the build.prop file in /system. The easiest way is with Root Explorer. Go to /system, mount r/w, open the build.prop in text editor and locate "wifi.supplicant_scan_interval=45" Change that value to 90 or whatever you want. Save the file, mount back to r/o, and reboot."
Q: Those automatic brightness settings are confusing. Anyone know of a good setting/rough guide?
A: This thread looks useful. So does this post
Q: How does that brightness slider thingey-majib work?
A: Per byrong "For those of you trying to figure out the new brightness-adjust-via-statusbar feature, do the following:
1. Settings > CM Settings > Interface > Status Bar Tweaks > StatusBar brightness (I'm guessing you guys already figured this part out)
2. Here's the trick: place your finger on the status bar, but don't drag it down. It will still 'peek' out some, but now you'll want to slowly drag your finger to the left or right while keeping it on the status bar itself. If you drag left, the screen will get darker; right for bright."
Q: I can't send no fancy mms picture messages!
A: Change you APN settings manually, (a popular way is to use GoSMS). MMSC: http://mms.vtext.com/servlets/mms MMS proxy: leave empty MMS port: 80 Any more I should add? Let me know.
Q: My bluetooth isn't working right.
And what does Mr. CUViper have to say about it?
For a fix, CUViper made a patch, and I added it to the stock cm kernel, and here's the 10/08 incredikernel: 2.6.38.8-incredikernel-gb-11042011.zip
If you need it on a different kernel, let me know.------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Credits/Thanks
All credit goes to the CM team, and especially our DInc maintainers, as listed by the CyanogenMod site: jistone (aka CUViper), slayher, and of course, Koush.
Also, a huge thanks goes to sykopompos (formerly gridlock32404) for hosting the unofficial nightly/hourly "Crackflasher Builds" and keeping the crackflashers happy with 4+ builds a day. Good times, good times.
Anyone I miss?
Sheesh these are slow downloads
I assume they are getting hit pretty hard. Anyways, hooray! Can't wait to use these CM7 has been one of the greatest ROMs for me so far
Isn't the only major issue the 720p on the camcorder and the lack of hardware acceleration?
I haven't been using the earlier builds, but I'm downloading the nightly right now.
Thanks for getting the discussion started, PonsAsinorem. I think this thread sounds like a good idea, especially if you'll be dedicated to update information (ROM status, fixes, scripts, known issues, etc). Based on your involvement in the crackflasher thread, I'd bet you'll do a good job ;-)
My vote is to keep this thread going
Sent from my ADR6300 using XDA App
camcorder appears to be broken again.
i believe slayher said hardware acceleration works fine.
some 3d games and apps are simply not compatible with gingerbread.
--edit-- well you can see we have some conflicting information.
slayher said:
Its an issue with Quadrant.
If you dont feel you have hardware acceleration, try downloading neocore, and nena mark from the market, I think you will change your mind.
I am not sure where the idea that we have no HW 3d came from, but we have it.
You can also try Speed Forge 3d demo too.
Click to expand...
Click to collapse
gridlock32404 said:
As far as I know of there is no hardware acceleration on any gingerbread phone except nexus s
sent from my cm7src icey beast
Click to expand...
Click to collapse
lafester said:
i believe slayher said hardware acceleration works fine.
Click to expand...
Click to collapse
I remember seeing that we wouldn't have stable hardware acceleration until the official Gingerbread update for the Nexus One comes out, so that we have the correct drivers. I could have missed something, though.
Anybody else getting "Status 7" when attempting to flash CM7??
Solved!
Update HBoot from .79 to .92
(For the love of God make sure your formated to FAT32)
Thx so much for starting the thread my vote is to surely keep it going.
Sent from my ADR6300 using XDA App
PonsAsinorem said:
Now that the official build bot is up, and gridlock said he would quit building, I figured I'd start a new thread based on the "new" nightlies. In the OP, I will attempt to keep track of mods, themes, kernels and bugs for CM7.
For now, here is where the builds are found (and in ROM Manager Premium) http://mirror.teamdouche.net/?device=inc
And the overall progress of the build bot
http://buildbot.teamdouche.net/
Now I'm off to flash the newest nightly (yes, I'm using my phone's 3G), after which I will clean up this post, based on if I get favorable remarks. Or we could continue to use the original crackflasher thread. Up to ya'll.
Click to expand...
Click to collapse
you can put my mod link in the OP, I'll keep working on them mattyg.me/cm7
thanks mattyg
Downloaded fast, using phone, flashed with rom manager. Havent tried camcorder yet, but no issues so far.
Sent from my ADR6300 using XDA App
I did a complete wipe before flashing build 0 and can confirm no working camcorder and my wifi problem of not switching APs appears to be persistent as well.
mattyg151 said:
you can put my mod link in the OP, I'll keep working on them mattyg.me/cm7
Click to expand...
Click to collapse
That's great news. Thanks Mattyg!
Lexworth said:
I did a complete wipe before flashing build 0 and can confirm no working camcorder and my wifi problem of not switching APs appears to be persistent as well.
Click to expand...
Click to collapse
Bummer on the camcorder. Oh well. Same results here. Overall running smooth though.
Any notable differences between this build and gridlocks?
Sent from my ADR6300 using XDA App
Ahh crap. Im going to miss the gridlock days
So now i have to download this using RM? I have never done that before, where does it store them on the sdcard?
rsarno said:
Ahh crap. Im going to miss the gridlock days
So now i have to download this using RM? I have never done that before, where does it store them on the sdcard?
Click to expand...
Click to collapse
there is a link in the op if you don't want to use rom manager.
i have never had any luck with that app. (currently it thinks i have an evo).
rsarno said:
Ahh crap. Im going to miss the gridlock days
So now i have to download this using RM? I have never done that before, where does it store them on the sdcard?
Click to expand...
Click to collapse
You can still download them manually from the link in the OP. The nightlies require rom manager premium too.
Sent from my ADR6300 using XDA App
rsarno said:
Ahh crap. Im going to miss the gridlock days
So now i have to download this using RM? I have never done that before, where does it store them on the sdcard?
Click to expand...
Click to collapse
You can download them off the site I posted in the OP. In ROM Manager (for nightlies, a premium license is required) it stores them at /sdcard/clockwork/...
I don't remember off the top of my head, and Root Explorer hasn't downloaded yet.
Wifi working fine here
Sent from my ADR6300 using XDA App
Introducing JellyCore AOKP ROM for Galaxy Note GT-N7000
Version: v4
Features:
- Compiled from source (see below)
- GAPPS Included
- Flash Player 11 included
- Latest HydraCore STD kernel (v5.3)
- 240 DPI
- No theming / visual modifications
- Build.prop tweaks (CleaNote style!)
- Other system tweaks
- Latest ad-free hosts
- SuperSU and full ROOT
- Project LARD
This is an *almost* stock AOKP build, compiled for my very kindly by Antiochasylum (of Asylum ROMs) with his full support and authorisation. The only changes are the inclusion of GAPPS, Flash player and the removal of all the pink unicorn stuff
Compiled from AOKP source GIT with all commits included, as of: 27th Sept 2012
Installation
Please install from any SAFE kernel (HydraCore, NoteCore, Speedmod, Goku, CM9 , CM10) within CWM. A full wipe of /system, /data and /cache will likely be needed coming from any other ROM type, so backup your data first. Making a nandroid backup is recommended as well. The ROM is distributed in the normal CWM installable .zip format
During installation delete_recursive is used rather than the format command, the included kernel (HydraCore) has MMC_CAP_ERASE removed and is therefore completely safe.
DO NOT WIPE IN STOCK KERNEL RECOVERY.
Please post all kernel related bugs in the HydraCore kernel thread
Please post all Kernel discussion topics in the HydraCore Discussion thread (General section of Note forum)
Please only post ROM related questions in this ROM thread.
Failing to comply will result in your post being ignored, and / or being reported!
Download: > http://hecubus.com/xda/ROM/JellyCore/JellyCore_v4.zip
What is project LARD ?
Project LARD is my first implementation of newer, pure JellyBean samsung drivers for the following
- Mali GPU
- EGL drivers
- GLES drivers
They are simply kanged from the Note2 system dump with no other changes. They have been tested for a couple of days by various people and reports are...GOOD. Its not quite Butter, its LARD :good:
Changelog:
v4
- Updated AOKP
- Updated kernel
- Build.prop changes
v3 - unreleased
v2
- Updated AOKP
- HydraCore 4.3b STD
- LARD
v1_b3
- Updated kernel to HydraCore 4.1 standard
- Added Project LARD stage 1
v1_b2
- First public release
Credits and thanks:
Antiochasylum (anti) for his special compilation
Myself and all the people listed in my Kernel thread "Credits" section
sswagonman for being a brave tester and general awesome dude
Formhault for just being Formhault
DONATIONS
Please first consider donating to antiochasylum as he does all the legwork compiling for me,
If you wish to donate to myself for this ROM please mark your paypal gift as "FOR JellyCore" and your donation will be split 50/50 with Antiochasylum
Donations are never requested, but always gratefully received!
reserved
The unofficial FAQ (Anti or Gavin let me know if you want me to remove)..
Also would love to hear from the wiser ones if they have thoughts, hints etc.
Where is s-memo?
Doesn't work without the touchwiz UI and CM, AOKP ROM don't use TW.
Besides there are better options.
Try these
Lecture Notes (Market)
Papyrus (Market)
GNote (XDA)
wat should i do after flashing missing external sd folder ? cant locate at all .... HELP
Did you possibly look in ExtSDcard folder, or /sdcard/sdcard01, or /mnt/sdcard01? Yep, it's in a different location on CM.
You can try using ICS SD Binder from the market to map back to the old location if needed.
My FM radio doesn't work?
Doesn't work in CM10, but Spirit FM in the market is reported to work. Really though, why not load up the SD card with music and avoid the adds?
I'm stuck in boot loops what do I do?
Did you follow the instructions in the OP..? Usually this happens when you have not wiped or coming from a ICS ROM or have a bad download (always check the MD5 before flashing)
If you can get into recovery and it's a safe version, try wiping and re-installing the ROM (follow the instructions)
If you can't get into CMW or still having problems a fool proof way is a completely clean install via PC Odin. This will wipe everything and put you back to a known good state.
BRICK... any sentence containing the word...
http://forum.xda-developers.com/showthread.php?t=1661590
Why does my battery go flat quickly?
Almost always an application is causing "wake locks" so it has nothing to do with the ROM. Use Better Battery Stats from the market to help identify the cause.
Which govenor do I use?
You are going to be just fine with the default settings, but if you feel the need read through the info on the follow link and give the different options a try.
http://forum.xda-developers.com/showthread.php?t=1736168
Which modem do I use?
Depends on your region etc, this thread has lots of information. In short you can use any modem (GB, ICS or JB) so download, test etc
http://forum.xda-developers.com/showthread.php?t=1645202
My apps are force closing (FC)?
Typically caused by not wiping data... (did you wipe data..?)
You can go into the app manager and wipe for the individual application and see if that resolves the problem. Regardless.. 99% likely it's not a ROM problem.
My screen is to small..?
Increase font size under settings or change the resolution, some ROM's have that in settings.. others you need to manually change the build.pro either via something like root explorer or Rom Toolbox (from the market)
If using Root Explorer, going to /system (make sure you are in R/W mode), and open build.prop? Find the lCD density line and change the number to 320 for phone UI stock or 240
How do I get rid of the mouse cursor when I use the s-pen?
http://forum.xda-developers.com/showthread.php?t=1606474
Even easier approach, just flash this. Not sure who created it, thanks to them though..! (Thanks to Toxic for posting it)
Collection of useful links
Search your best friend.
http://forum.xda-developers.com/sitesearch.php
http://www.google.com
Information on safe kernels
http://forum.xda-developers.com/showthread.php?t=1857556
NOOB friendly FAQ
http://forum.xda-developers.com/showthread.php?t=1774208
Guide to reviving a bricked note
http://forum.xda-developers.com/showthread.php?t=1661590
General CM10 questions (not ROM specific)
http://forum.xda-developers.com/showthread.php?t=1807291
Useful, then please hit thanks..! When I hit a 1,000 thanks I'll post a picture of my super model wife in the shower..!
Bout time u let this baby out in the open Gavin. Well done
Sent from my GT-N7000 using Tapatalk 2
I was waiting for this.:good:
removal of all the pink unicorn stuff
Click to expand...
Click to collapse
Thank God for that!
chasmodo said:
I was waiting for this.:good:
Click to expand...
Click to collapse
its brand new, only built yesterady :laugh: (hence the _build_2 in the name lol)
should be ultra smooth compared to build 1 :good:
EDIT
if anyone finds any unicorns i missed, please let me know where you found it
screenshoot please :victory:
Congrats Gavin!! Excellent work.
Sent from the asylum wardens office. Running the best asylum rom (Asylum AOKP)
Awesome work,Gavin
aqishimie said:
screenshoot please :victory:
Click to expand...
Click to collapse
I'm not sure about you, but I'm not going to shoot my screen, however I will provide a screenSHOT.
aokp.co
Very nice. Flash and enjoy people. Its super smooth! Promise!:highfive::good:
Great work Gavin,been waiting for this.
Overall verry smooth!!
Only one thing no usb mass storage for me,device not recognized bij PC.
Will flash again with full wipe this time,comming from AOKP.
EDIT: Full wipe did the trick,evrything working as it should!
Gavin, will there be anymore support for Cleanote? and since LRQ is around now, will there be a new release?
md5 please?
Anonymous Vagrant said:
Gavin, will there be anymore release and support for Cleanote? LRQ is around now, just wondering.
Click to expand...
Click to collapse
check the thread! :good:
[email protected] said:
Great work Gavin,been waiting for this.
Overall verry smooth!!
Only one thing no usb mass storage for me,device not recognized bij PC.
Will flash again with full wipe this time,comming from AOKP.
Click to expand...
Click to collapse
MTP is used by AOKP for data transfer, USB mass storage works fine from CWM. MTP working fine, been throroghly tested. But yes a full wipe recommended for first install
+1000
sweet work Gavin ,You're quickly becoming my favorite Dev
Btw ,I've been hearing about memory leaks ,does this ROM suffer from it? or is it a kernel thing related to CM10 kernel?
Great work, Anti and Gavin.
A small request or recommendation if I may: how about posting MD5 with releases?
Those who know their way around will wriggle out of a bad zip flash, but many a n00b won't, and you might find yourself swamped with complaints and requests for help.
MR.change said:
+1000
sweet work Gavin ,You're quickly becoming my favorite Dev
Btw ,I've been hearing about memory leaks ,does this ROM suffer from it? or is it a kernel thing related to CM10 kernel?
Click to expand...
Click to collapse
At the moment all cm10 Roms will suffer from it to some extent. A reboob helps tho and hopefully cm will find the issue soon
Sent from my GT-N7000 using Tapatalk 2
Thanks Gavin.... you're the man !
As begbie says in Trainspotting after his horses win:
"YEESSSSS you fkin Dancer !!!"
:good:
g.lewarne said:
Credits and thanks:
Antiochasylum (anti) for his special compilation
Myself and all the people listed in my Kernel thread "Credits" section
sswagonman for being a brave tester and general awesome dude
Formhault for just being Formhault
Click to expand...
Click to collapse
Lol.....
chasmodo said:
Great work, Anti and Gavin.
A small request or recommendation if I may: how about posting MD5 with releases?
Those who know their way around will wriggle out of a bad zip flash, but many a n00b won't, and you might find yourself swamped with complaints and requests for help.
Click to expand...
Click to collapse
But that takes all the fun and guesswork out of it chas. U old buffers taking the fun out of life lol
Sent from my GT-N7000 using Tapatalk 2
Olympus CyanogenMOD 9 with Kernel 3.1.10
This thread is dedicated to Unofficial builds of CyanogenMOD 9 (ICS) for Olympus AKA Atrix and MB860, the new 3.1.10 kernel is also part of this build (http://forum.xda-developers.com/showthread.php?t=2016837)
CURRENT KNOWN ISSUES:
Same as kernel 3.1.10
CURRENT KNOWN ISSUES SPECIFIC TO THE CURRENT VERSION OF CM9:
Fruit Ninja THD doesn't work (won't be fixing that). Normal Fruit Ninja works, it's high res now, so basically the same. To play Fruit Ninja you have to enable GPS.
Requirements:
Clockworkmod or compatible recovery
Atrix 4G with unlocked bootloader
WARNING: I DECLINE ANY RESPONSIBILITY IN DAMAGING YOUR PHONE. YOU ASSUME ALL RISKS IN ANY PROCESS DESCRIBED ON THIS PAGE.
Installation:
Download file build zip file
Put the file somewhere on the sdcard
Backup your current ROM
Boot Clockworkmod recovery
Perform a factory reset (data and cache) *** NOT REQUIRED IF UPDATING FROM A PREVIOUS VERSION ***
Clean dalvik cache
Install build zip file from sdcard
Boot the phone
Reboot in recovery and install Google ICS Apps (this is required to avoid the home and search button not working)
Reboot
1st reboot takes a little longer
Update from a previous version:
Download file build zip file
Put the file somewhere on the sdcard
Boot into recovery and install zip
Install Google ICS Apps
Wipe cache/dalvik
Reboot
contributors: mmontuori, lehjr, epinter and me
Please consider providing valuable FEEDBACK to the thread. But before that be sure to check the FAQ thread, to get familiar with what is already known or what has already been explained
Here is bug reporting spreadsheet, use it to inform me about any found issues.
Download Links:
cm-9-20131016-UNOFFICIAL-olympus.zip
cm-9-20131120-UNOFFICIAL-olympus.zip
cm-9-20131121-UNOFFICIAL-olympus.zip
gapps-ics-20120429-signed.zip
gapps-ics-facelock-20120131-signed.zip - 17.23 MB
Thanks!
Grab this while I can
Grab this one too...
Awesome.
Downloading now...
Edit: running it now.
Sent from this ROM
finally. thanks
MB860 cihazımdan Tapatalk 2 ile gönderildi
Waouh!
Downloading immediately!
Thanks for all of your hard works and now the time has come, I can't wait to try this
and do not forget to buy a beer to those fantastic developers!!!
Thanks !!! Good Job!
Is there any reason to use the 20120317 gapps as opposed to the 20120429 gapps?
Please donate to this awesomes devs!
I want to cry... This is epic!
Where can I find the "same as kennel 3.1.10 known issues" ??
This make me want to get a credit card so bad D:!
P.s. People remember to keep always the thread on topic!
BioVipah said:
I want to cry... This is epic!
Where can I find the "same as kennel 3.1.10 known issues" ??
This make me want to get a credit card so bad D:!
P.s. People remember to keep always the thread on topic!
Click to expand...
Click to collapse
The main thread OP.
http://forum.xda-developers.com/showthread.php?t=2016837
---------- Post added at 06:10 PM ---------- Previous post was at 06:08 PM ----------
So this still has the ROM level issue of 10 percent battery?
I downloaded [url="http://code.google.com/p/battery-indicator/wiki/PackageDownload?tm=2#Download_APK_Packages]BatteryIndicator and it tells me I'm at 94% while the system says 90.
!!!!!!!!!!!!!!!!!!!!!!!!
i will IMMEDIATELY install!
thank you
Guys, this is very good. Congratulations to all involved. I know it was very hard work. Downloading ja. Once you receive my payment, I will pay a few beers for y'all.
Important
Please Can Anyone Write Known Bugs Before Trying It ?
Can You Upload Some Screenshots ?
Thanks For Our Great Developers
Amr Nasser said:
Please Can Anyone Write Known Bugs Before Trying It ?
Can You Upload Some Screenshots ?
Thanks For Our Great Developers
Click to expand...
Click to collapse
The bugs can be found in the main thread.
To the devs: did your tests have low battery life? I'm getting the same as before.
13 minutes screen on. 11% down.
Brilliant job, much appreciated. Time to download.
Sent from my MB860 using xda app-developers app
This is epic!! thanks for all the hard work and effort put on this proyect!! this is really incredible!! thanks!
************************************************** ***************************************************
Early stage guide for Kit Kat 4.4 | Please read before posting in Kit Kat ROM threads
************************************************** ***************************************************
Hi there,
As we get more and more Kit Kat ROMs I've decided to create this thread. In every ROM thread, the same questions are asked so I think it would be useful to collect the most important questions into a central location so the other threads don’t become tedious and difficult to read. If I forgot something or you have any suggestions, please let me know.
@moderators
If I'm in the wrong section please move my thread.
If there is a similar thread (I didn't find one) please close this one.
UPDATE: kk 4.4 factory image out now
hangouts and messaging are in. the normal email app is in too. Don't know if it's the aosp one.
for new google launcher:
1. Google Search http://www.androidpolice.com/2013/1...y-fixes-gel-on-tablets-and-more-apk-download/
2. Experience Launcher http://www.androidpolice.com/2013/1...once-you-get-your-kitkat-update-apk-download/
Install in this order the goto 16
after that it looks like the n5 port.
1. Features
All currently available builds are in an early state. This means that a lot of the customization you had in 4.3 ROMs are not available at the moment. The devs are working on it.
2. What isn’t working in all 4.4 ROMs
Binaries released. So everything should working.
3. Dalvik Runtime and ART
A new feature has been implemented in Kit Kat called ART (Android Runtime). What is it? Take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=2516303
credits to: @freebordjunky
4. Which one should I choose?
It's your own decision! ART is faster than Dalvik from my personal experience. You can switch between runtimes:
settings -> developer options -> select runtime
5. Does ART have any requirements?
Yes. Two important things you should notice:
a.)
If you switch to ART you have to reboot. During the reboot, your device switches from using Dalvik Runtime to ART. This may take a while.
IMPORTANT
You may have a lot FC 's in GAPPS. Why? This happens when you have flashed the wrong GAPPS package. To work properly you have to flash an Odex GAPPS package. You will find this here from @#gnome: http://forum.xda-developers.com/showthread.php?t=2508185
If you want to know more about odex and deodex - ask google
b.)
Some apps are still not working on ART and no known workaround is available. Three apps that I know of are Foursquare, Whatsapp and Titanium Backup (tested 6.10).
WhatsApp Workaround credits to @luiseteyo :http://forum.xda-developers.com/showthread.php?t=2527879
6. GAPPS packages
There are different packages available. It’s all up to preference.
Deodex
1. AOSP launcher and stock Messaging
2. Google Experience Launcher and Hangouts for SMS
Odex (ART)
1. AOSP launcher and stock Messaging
2. Google Experience Launcher and Hangouts for SMS
7. Is this faster than…
Sorry guys. How do I score this? Every configuration is different and so often there are individual experiences so... try, try, try until you find the right one for you.
8. Custom kernels
Binaries released. So kernels will come.
IMPORTANT
If you have screen issues, flash the CM colorfix. It's available here on xda, just use search.
9. SMS & Hangouts
To import SMS from other ROMs, first restore messages using TiBu or SMS Backup & Restore to the AOSP Messaging app. After this you can activate Hangouts as the default SMS app. It should then import your messages. Maybe it's necessary to clear hangout's cache after that.
10. Factory images and binaries
Released
11. Errors during flashing
If you got errors during flashing you have to try another custom recovery. In TWRP there were some problems with version 2.6.3. Upgrade to the latest version (2.6.3.2) to get rid of the errors.
TWRP here: http://techerrata.com/browse/twrp2/mako
12. Is Viper audio working?
Yes. It may be necessary to uninstall musicfx and / or dsp manager.
Please use chainfire's supersu for viper audio. You have to enable compatible mode in viper.
13. Icons are big
You can change this via build.prop editor. Edit this entry: ro.sf.lcd_density
Play Store Link: https://play.google.com/store/apps/details?id=org.nathan.jf.build.prop.editor
14. Enable Google Now
Press long and hold on a free area on your homescreen.Select Settings and enable Google Now
15. Dalvik Optimization
From Moto X device extracted dalvik optimization binaries. It will increase speed.
Credits @kszaq: http://forum.xda-developers.com/showthread.php?p=47631545
16. Nexus 5 - Sounds, Fonts, Bootanimation, Wallpapers
There's a flashable.zip for this. credits @carepack lol: http://forum.xda-developers.com/showthread.php?t=2543833
Direct Download:
Download Sounds, Bootanimation, Fonts: http://d-h.st/20a
Download Sounds, Bootanimation, Fonts, Wallpapers: http://d-h.st/gPH
Notice:
Many devs will start their work officially when Google releases the correct binaries. Before then take what you can get and be patient.
I hope this helps all of you out there and cleans up the threads a little bit.
Big thanks to @meijin3 for translation help! Thank you man!
reserverd
@Mantulis
@jayRokk
Custom kernels are available. With old binaries. This means not every kernel developer will release his work until google publish the new binaries.
carepack said:
@Mantulis
@jayRokk
Custom kernels are available. With old binaries.
Click to expand...
Click to collapse
/Nice edit.
And why are you telling me what i tell you in your previous thread. Anyway you fixed your mistake. Whats all mater for me.
Sent from my Nexus 4 using Tapatalk
Mantulis said:
/Nice edit.
And why are you telling me what i tell you in your previous thread. Anyway you fixed your mistake. Whats all mater for me.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
sorry can't find the mistake in this old comment
Dev's are working on it. Some Kernels are available from some dev's. For example from @anarkia1976
Important
If you have screen issues - flash the cm colorfix. It's available here on xda. Use searching
carepack said:
sorry can't find the mistake in this old comment
Dev's are working on it. Some Kernels are available from some dev's. For example from @anarkia1976
Important
If you have screen issues - flash the cm colorfix. It's available here on xda. Use searching
Click to expand...
Click to collapse
I have disconnect bluetooth issues when streaming in the car. Pebble keeps reconnecting every 15 mins or so. I live on bluetooth because of these two things. In every 4.4 port/rom, it's the same missing libs IMO. So no go for me for now. I am getting a N5, in a few weeks, but wanted to check out KK. Other than the BT issue, the port is a great port! Smooth, and launcher works perfectly! But because of my need of BT I have revered back to my PA 3.99 since last night and BT connection hasn't discoed at all since then.
Thank you !
Enviado desde la muerte a través de un Nexus4
I am getting BT drops as well. Seems to be after leaving the screen off for a while. It reconnects as soon as turn the screen back on.
I have also had quite a few dropped calls but can't be certain that this wasn't the network.
Sent from my AOSP on Mako using xda app-developers app
In LGOG which is the sibling of N4 we have also an AOSP 4.4.. About the compass there's an app AndroiTS GPS which has working compass on it.. But in Maps and other gps app compass doesnt work... Wouldnt hurt if u try..
Sent from my LG Optimus G using Tapatalk
my compass works fine, rastakat rom + trinity kernel.
simms22 said:
my compass works fine, rastakat rom + trinity kernel.
Click to expand...
Click to collapse
Has trinity kernel been updated for KK?
The Zel said:
Has trinity kernel been updated for KK?
Click to expand...
Click to collapse
Go in his thread and look. Lazy.
some changes added!
The Zel said:
Has trinity kernel been updated for KK?
Click to expand...
Click to collapse
no, not yet. morfic wont touch it until the binaries are released.
simms22 said:
no, not yet. morfic wont touch it until the binaries are released.
Click to expand...
Click to collapse
yes, most of devs start to release then.
Thanks for the tips on how to get ART working. I've honestly never used Android with this smoothness before, it's amazing.
You should use bold fonts for the title so more people will notice.
eksasol said:
Thanks for the tips on how to get ART working. I've honestly never used Android with this smoothness before, it's amazing.
You should use bold fonts for the title so more people will notice.
Click to expand...
Click to collapse
you mean the title in first post? how more people will notice? thx (my thanks meter reached limit today)
I meant the thread title. You could use a tag like [GUIDE].
eksasol said:
I meant the thread title. You could use a tag like [GUIDE].
Click to expand...
Click to collapse
ok i understand. was irrating because of bold fonts. didn't know what you mean.
Thanks for the hint.
Sent from my Nexus 4 using xda app-developers app
DO NOT post in this thread until you have read the first three posts and last two pages of this thread in their entirety!
"Me Too" posts for known issues with no useful debugging information WILL BE REPORTED.
What is Omni?
Omni Gerrit Review
OmniLog - changelog
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
ROM:
Omni for Samsung Galaxy S 4
Gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
(recommend the MODULAR FULL package, however, keep in mind that the STOCK package is intended for Nexus devices)
UPDATE FROM VARIANT OMNI BUILD TO UNIFIED BUILD
Backup your apps and other pertinent data and DO A FULL WIPE.
Don't complain about it. Just do it. If you try to post bug reports or complaints and you have not conducted a wipe of:
/system
/data
/cache
/dalvik
I will completely and utterly ignore you, as well as report your post for not reading the clearly posted rules at the top of this post.
UPDATE FROM OMNI VIA OPEN DELTA UPDATER
Settings -> System Updates -> Check for update
You will NOT need to wipe anything with the delta updates unless it is explicitly stated or you start having strange issues.
Omni only supports TWRP recovery, use any alternate recovery at your own risk.
Kernel Source: https://github.com/omnirom/android_kernel_samsung_jf
XDA:DevDB Information
Omni for Galaxy S4, ROM for the Samsung Galaxy S 4
Contributors
jakew02, xplodwild
Source Code: http://www.github.com/omnirom/
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2014-05-28
Last Updated 2015-04-20
Important Information
This is NOT the place to ask questions like:
When will <feature> be included?
Is <feature> included yet?
Can you bring <feature> to Omni?
ETAs of any nature
Follow the rules. This is a new thread and it WILL remain clean and ON TOPIC. I will immediately report any off-topic posts, trolling, flaming, etc. of any sort. This is a DEVELOPMENT thread, and as such, has been posted in the DEVELOPMENT section.
INCLUDE LOGS when reported a bug. Even if you think that you might be the only one with the bug, POST LOGS, that will help narrow down the issue about 100 million times!
Explore the ROM a bit before posting here things like " WHERE IS <feature> CAN YOU ADD FEATURE etc. etc.
You have to understand, that gets extremely annoying after 50 posts like that. Most features can be seen on the blog or in the MERGED section of gerrit.
Root IS NOT included with Omni by default, so you will need to flash SuperSU in recovery SuperSU
How to build Omni from sources:
OmniROM - Setting Up A Compile Environment
Bug Reports and Feature Requests
jira.omnirom.org
Important Information Part 2
Omni XDA Discussion ( NOT DEVICE RELATED DISCUSSION ONLY)
http://forum.xda-developers.com/omni
IRC
Web Client
irc.freenode.net
#omni
First
Using 052814 unified build with 052414 full modular gapps...ROM boots but gets stuck at the "setup wizard". After you select your language and press the white triangle it reads " Welcome...please wait a few minutes" for a minute or so...the the screen goes black except for the status bar and the backlights on the hardware keys stay on.
I clean flashed twice then downloaded the ROM and gapps for a 2nd time then clean flashed those twice...all with the same results as described above.
Hope this helps.
Sent from my SPH-L720 using Tapatalk
Hello,
I know one can flash the 9505 rom on the i337m becuse the bootloader is not locked, but what about the AT&T version (i337), can i flash this (jflte) version on my i337 ?
rabiny said:
Hello,
I know one can flash the 9505 rom on the i337m becuse the bootloader is not locked, but what about the AT&T version (i337), can i flash this (jflte) version on my i337 ?
Click to expand...
Click to collapse
Yes. If you notice, I closed the individual variant threads and put a direct link to this thread. Basically, you can see a list of supported variants by checking this:
https://github.com/omnirom/android_device_samsung_jflte/blob/android-4.4/BoardConfig.mk#L129
That is the list of device asserts that the updater-script will accept.
buzzwyzr said:
Using 052814 unified build with 052414 full modular gapps...ROM boots but gets stuck at the "setup wizard". After you select your language and press the white triangle it reads " Welcome...please wait a few minutes" for a minute or so...the the screen goes black except for the status bar and the backlights on the hardware keys stay on.
I clean flashed twice then downloaded the ROM and gapps for a 2nd time then clean flashed those twice...all with the same results as described above.
Hope this helps.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I just flashed the 05/28 nightly (on my jfltespr) with the 4-16 Minimal PA Gapps with absolutely no errors. This most definitely sounds like a Gapps problem to me, since the SetupWizard is not packaged or built with the ROM, but instead flashed with Gapps. This is why if you were to NOT flash a Gapps package, you don't have to run through it.
jakew02 said:
Yes. If you notice, I closed the individual variant threads and put a direct link to this thread. Basically, you can see a list of supported variants by checking this:
https://github.com/omnirom/android_device_samsung_jflte/blob/android-4.4/BoardConfig.mk#L129
That is the list of device asserts that the updater-script will accept.
Click to expand...
Click to collapse
Thank you for the quick reply,
What about the locked bootloader, Are there any points I should pay attention to ?
Or i can just download the recent file (from http://dl.omnirom.org/jflte/) and flash it over my current version (jflteatt)
rabiny said:
Thank you for the quick reply,
What about the locked bootloader, Are there any points I should pay attention to ?
Or i can just download the recent file (from http://dl.omnirom.org/jflte/) and flash it over my current version (jflteatt)
Click to expand...
Click to collapse
If you are already running Omni then you're fine. Just follow the instructions from the OP.
These instructions are written under the assumption that you know how to root and install a custom recovery.
Sent from my X9006 using Tapatalk
Is custom hot word launcher built in yet?
ahoslc said:
Is custom hot word launcher built in yet?
Click to expand...
Click to collapse
Yes. I've been using it and it works perfectly fine.
You can see that from gerrit as well as the XDA News Portal...
I'm squashing questions like this now. Please re-read Post 2 as I have updated it.
flashed the 30th nightly, thought of asking about two things,
1. why does the initial setup page needs a working data connection?
2. i lost root after a clean install, am i missing something?
bala_gamer said:
flashed the 30th nightly, thought of asking about two things,
1. why does the initial setup page needs a working data connection?
2. i lost root after a clean install, am i missing something?
Click to expand...
Click to collapse
the root apk has to be flashed via recovery as stated on the first page post.
---------- Post added at 08:40 PM ---------- Previous post was at 08:27 PM ----------
Hello Jakew02
I moved over to your latest rom yesterday the 5/29 nightly and i came across a couple issues.
i have been using cm mod since the days of android cupcake and decided to try this out.
1st issue is when im trying to lower the phone ringer volume, it always goes to lower the sounds/music volume. it is pretty annoying because i have to make all the sliders come out and manually slide the phone ringer volume. even after switching between apps and what not it insists on lowering the music volume.
2nd issue is i cannot get the multi window to work or how to enable it. i have downloaded and installed these apps :halo)),multiwindowsidebar, toggle multiwindow, xhalo floating, xmultiwindow, and xposed installer. also the fixvisibilityofmultiplenonulls. Any help on getting it to work will be appreciated. i am very new to this feature since ive never had it in CM since i thought u couldnt get it, only on Stock Samsung roms.
lastly, is there any way to add shortcuts to the unlock slider like in cm?
thanks
djbootleg said:
the root apk has to be flashed via recovery as stated on the first page post.
---------- Post added at 08:40 PM ---------- Previous post was at 08:27 PM ----------
Hello Jakew02
I moved over to your latest rom yesterday the 5/29 nightly and i came across a couple issues.
i have been using cm mod since the days of android cupcake and decided to try this out.
1st issue is when im trying to lower the phone ringer volume, it always goes to lower the sounds/music volume. it is pretty annoying because i have to make all the sliders come out and manually slide the phone ringer volume. even after switching between apps and what not it insists on lowering the music volume.
2nd issue is i cannot get the multi window to work or how to enable it. i have downloaded and installed these apps :halo)),multiwindowsidebar, toggle multiwindow, xhalo floating, xmultiwindow, and xposed installer. also the fixvisibilityofmultiplenonulls. Any help on getting it to work will be appreciated. i am very new to this feature since ive never had it in CM since i thought u couldnt get it, only on Stock Samsung roms.
lastly, is there any way to add shortcuts to the unlock slider like in cm?
thanks
Click to expand...
Click to collapse
These aren't issues or bugs at all; you just haven't looked around the settings.
all of your questions can be answered by just looking through the settings.
OP updated, please re-read it.
Download page says 193 Mb, the download is 183 mb. I downloaded twice, both 183. Anyone else? The newest nightly.
Sent from a Shaftamle Galaxy S4
"Thanks Button" is always appreciated!
http://mycolorscreen.com/Shaftamle/
Shaftamle said:
Download page says 193 Mb, the download is 183 mb. I downloaded twice, both 183. Anyone else? The newest nightly.
Sent from a Shaftamle Galaxy S4
"Thanks Button" is always appreciated!
http://mycolorscreen.com/Shaftamle/
Click to expand...
Click to collapse
It's 183mb, I've just flashed. Working fine.
ZordanKV said:
It's 183mb, I've just flashed. Working fine.
Click to expand...
Click to collapse
Have you tried flashing a custom kernel with the latest nightlys?
bobbarker2 said:
Have you tried flashing a custom kernel with the latest nightlys?
Click to expand...
Click to collapse
Nope, already switched to the other ROM. Omni is good, but doesn't suit my needs
bobbarker2 said:
Have you tried flashing a custom kernel with the latest nightlys?
Click to expand...
Click to collapse
gpu drivers fixed
jakew02 said:
i have stated multiple times that kernel developers will need to begin released "omni-based" kernels.
I WILL NOT alter this ROM to accommodate custom kernels. the kernels need to change to be compatible with the ROM.
Custom kernels will not just magically start working. Kernel developers need to remove the flo adreno drivers and related commits from their kernels. If they don't know which commits those are, they can simply cherry-pick this commit: https://github.com/omnirom/android_kernel_samsung_jf/commit/068449af3996f1072c80dcc4a09a88af43abd7f7
contained in that commit is all of the reverts needed to make a cyanogenmod-based kernel work with Omni.
I have spoken with @Entropy512 about this a few times and we both agreed that we will NOT be altering the ROM in order to this one device to be able to use flo adreno stuff. That's just stupid and causes more work and problems for everyone else.
So the bottom line on this is, if you want a custom kernel, ask your kernel devs to cherry-pick the above commit and release Omni kernels separately from CM-based one.
If anyone has a problem with this, well, gerrit is free to use and open to all.
As before I will use this comparison to better justify my decision:
You wouldn't buy a Playstation controller(an accessory) to use with your Xbox(a primary), once you get home and realize it doesn't work because it's designed for something other than what you have, you call Microsoft and demand that they make the Xbox(primary) work with Playstation controllers(accessory)?
Absolutely Not. If ANYTHING, you would call Sony and demand that they make their controllers(accessory) work with the xbox system.
Hope this clarifies that issue a little better for everyone.
Also on another note:
I have narrowed down the camera preview freeze down to one repository
Click to expand...
Click to collapse
Jake the only reason I asked was because I did a bit of testing for you where the testbuild had support for custom kernels and you said that it should be fixed and you would push the change when you could. I even followed up with you at a later time and you said you hadn't had time/inclination to do it yet. I'm not demanding anything of you and I didn't want to bug you with the issue so I asked someone else who was in similar territory. Had I known about your changed stance on the issue, I wouldn't have brought it up.