Related
hello,
I explain what happened.. after a little bad luck I briked my phone, but I have the update.zip to restore the previous state, the problem I have is that update.zip is in my pc.
how can I transfer the update.zip file to my phone if it's bricked?
I tried to go into CWM recovery, and then connect via ADB, but my pc it doesn't detect the phone (I've installed samsung usb drivers from this forum). also I tried the option "mount USB storage" in CWM but my pc doesn't do anything, and I have the sdcard mounted.
what can I do? thanks in advance!
best regards!
Jord
try to put the file on external sd and see if you can flash it thru recovery.
otherwise boot into download mode and flash that son of a ***** !!!
thanks a lot for your answer
the problem is that I have a trip pictures in internal SD card, that's why I'm avoiding to flash again through Download mode. (I have all other data in a backup except the pictures!)
now I've copied the update.zip to the external sd, I've mounted the external sd, but when I chose external_sd folder to apply the update.zip it says that "no files found" all possible methods aren't working
it was worth a shot but i didnt think it would work.
i think to flash from the external sd requires a steam kernel.
anyway, try do do a factory reset and see it that helps. along with formatting cache / dalvik cache
this will not delete items on your internal sd card
jordcrk said:
thanks a lot for your answer
the problem is that I have a trip pictures in internal SD card, that's why I'm avoiding to flash again through Download mode. (I have all other data in a backup except the pictures!)
now I've copied the update.zip to the external sd, I've mounted the external sd, but when I chose external_sd folder to apply the update.zip it says that "no files found" all possible methods aren't working
Click to expand...
Click to collapse
Odin doesn't touch the Internal SD, so why should that be an issue?
thanks both for your answers.
the problem is that I have voodoo lagfix enabled, and I can`t disabled it because it says that there is not enough free space on sd card (because of the pictures I want to save), so I think that with voodoo lagfix enabled I can't restore the firmware via odin, unfortunately. I wish I'm wrong
thanks a lot again
Just flash 2.1 with 3 files + re partition checked
u shd be sweet to use it
deadey3 said:
Just flash 2.1 with 3 files + re partition checked
u shd be sweet to use it
Click to expand...
Click to collapse
my odin shows that they are two devices connected when I connect my phone (because of voodoo lagfix enabled) so.. are you saying that even if in that state, I reflash my stock firmware with repartition enabled, my sdcard data will be fine after reflashing? I ask that because unfortunately I'm not sure
thanks a lot
Hello boys and girls,
I think the internal SD card of my i9000 is corrupted. I've tried everyting: wiped/factory reset, reinstalling Cyanogenmod10, installing Stock ROM, installing stockrom with re-partitioning on etc. Nothing works. I'm using odin to reinstall the stock ROM. 'Uploading' the stock ROM to my phone goes well, but then when I restart and android is installing, I get error messages like:
/dev/block/mmcblk0p2 or
/dev/block/mmcblk0p1
After reading a lot on XDA, my conclusion is: broken internal storage.
Now I want to install everything on my external SD. So I bought a 8GB cat10 SD card.
I followed the instruction given in this youtube video (the error in the video is the same as mine): http://www.youtube.com/watch?v=zdMhYYdMB08 Unfortunatly this didnt help. Reading the Youtube comments it seems this method only works when you're SD card is totally broken. Mine is not I guess
Then I found this XDA-post: http://forum.xda-developers.com/showthread.php?t=1893354 Seems very promising, but I seem to get stuck on '-- Extract initramfs from zImage ( https://github.com/mistadman/Extract-Kernel-Initramfs )'. I;ve got a virtual machine running Ubuntu. When I start the script, nothing happens..... the terminal just closes.
The easiest solution for my problem would be a ROM that is altered to directly install on my external SD. I red somewhere that ROMS like that exist. Can't seem to find one though.
Well.. thanks for reading my post, and accept my appologies for my bad english. You can probably notice I'm not a native speaker.
Does someone have a solution for me? Maybe know of a good thread?
Thanks in advance!
Greatings, Eldoro
eldoro said:
I think the internal SD card of my i9000 is corrupted.
Click to expand...
Click to collapse
check out My Android Solutions and My Android Collections on How to Flash a Rom with a broken SD card
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.
Corrupt internal storage
xsenman said:
check out My Android Solutions and My Android Collections on How to Flash a Rom with a broken SD card
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.
Click to expand...
Click to collapse
Thanks for your advice. There are a lot of solutions in 'My android solutions'. I have taken another look at my error message, but it's a bit different then the onces that a there. So I don;t know wich one to pick. I will attach a screenshot of my error message:
Trying the other link you gave me (My android Collections), I don't really understand the second step. See my remarks in red:
[I]ROM update without SDcard
If you don't have an sd card, or your slot is broken you can try this trick, but you will need a custom recovery like Clockwork.
Boot up your phone to recovery. And move your rom file to the adb directory, and start a command line ( cmd ) (How do I do this? Where is de adb directory? Where do I start cmd, on my pc or on my android? What is a adb shell?)
adb shell
mount data
adb push D:\custom_rom.zip /data/
Wait until the push finised, and restart your device to recovery again with "adb reboot-bootloader"
mount data
mount /data /sdcard ( mount the data folder into your sdcard folder, so your recovery will think that you have an sdcard installed )
Locate the ROM .Zip file you wish to flash.
Confirm the flash by following the on-screen instructions (ie: pressing the trackball, pressing the call button, etc.)
If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
With some root file explorer, remove the rom file if you don't need it anymore, to free up space.
Or use adb to remove the custom recovery
adb shell rm data/custom_rom.zip
[/I]
Hope you can point me in the right direction.
screenshot
HEre is the link to my screeshot. Didnt seem to work in my previous post:
postimage.org/image/8451hvzuz/
Greatings, Eldoro
eldoro said:
HEre is the link to my screeshot. Didnt seem to work in my previous post:
postimage.org/image/8451hvzuz/
Greatings, Eldoro
Click to expand...
Click to collapse
what are you trying to flash with 3e recovery, its better to use CWM recovery, just flash a semaphore kernel to get root and CWM
still problems with semphore
xsenman said:
what are you trying to flash with 3e recovery, its better to use CWM recovery, just flash a semaphore kernel to get root and CWM
Click to expand...
Click to collapse
I've flashed smaphore kernel with Odin. I also downloaden Cyanogenmod-10-20121017.
I started my phone with the 3 button combo and got into CMW 6. Then I mounted USB storage and tried to transfer CM-10 to internal storage. While transfering my phone reboots...
I then succesfully copied the CM-10 file to my external SD. When I install the zip (after a wipe data/factory reset and wipe cache) I get the following error: postimage.org/image/5ma4nnnhj/
When I restart my phone I can't get into CMW again... so I flash semaphore again.
When I;m in CMW again I tried some thing... maybe its interesting for you to see:
After I wipe data/ factory reset, and I go to advance -> show log, I see the following errors: postimage.org/image/ygj9q6o1v/
Another example. In CWM, when I try to mount /data and /system, I get the following error: postimage.org/image/hol1hhhyd/
Mounting /data or /cache goes doesnt give any problems.
Hope this gives you some more insight..
eldoro said:
I've flashed smaphore kernel with Odin. I also downloaden Cyanogenmod-10-20121017.
Click to expand...
Click to collapse
The root cause of your problem is status 0 ( see My Android Solutions) likely you have flashed an ICS or JB kernel on a Gingerbread , thus having the wrong version of CWM on your phone . go here My Android Collections and download the correct kernel to use according to the firmware you are using
Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
xsenman said:
The root cause of your problem is status 0 ( see My Android Solutions) likely you have flashed an ICS or JB kernel on a Gingerbread , thus having the wrong version of CWM on your phone . go here My Android Collections and download the correct kernel to use according to the firmware you are using
Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
Click to expand...
Click to collapse
I have flashed the semaphore GB kernel 2.7.4 (first pulled out battery, ext sd and hold powerbutton for 60 seconds). Getting other errors now:
postimage.org/image/4pjqlcgb7/ -> screenshot initial booting in CMW
postimage.org/image/8i4rltz7r/ -> screenshot trying tot install zip
Then I flashed Gingerbread (I9000XXJVU_I9000OXAJVU_OXA) -> pda, modem and csc file, partitioning unchecked). After flashing, android keeps restarting on this screen: postimage.org/image/o5ojzxvnr/
Then I pull out battery again, hold powerbutton and power on my phone again. Then I get this error message: postimage.org/image/ecnm34gmf/
I then flash again with semaphore GB 2.7.4. When I restart my phone I don't get past the first 'Galaxy S' screen....
eldoro said:
When I restart my phone I don't get past the first 'Galaxy S' screen....
Click to expand...
Click to collapse
Do a clean flash, meaning you will wipe everything and format your SD card too, since you will have CWM recovery
1) First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power
button for a minute, than powerup without SIM and Ext.SD Card....
2) use combo keys to get into CWM recovery
a) wipe everything, data, cache, dalvik cache in advance
b) go into > mounts and Storage> format everything (except boot) repeat ..do it twice....than pull out battery and use combo keys to boot into download mode ( you will lose everything in your phone by doing this, hope you have backed up your contacts, images and game data etc) If you did not mout to USB storage first and copy the entire SD card to your PC first)
3) connect to PC, use ODIN3 and flash the JVU ROM with a 512 PIT file with repartitioning checked
Once it has booted , check your phone, check your SD card ( so that everything is functioning)
4) Flash the GB semaphore kernel and check again all is functioning, backup your efs before you try custom roms like this
xsenman said:
Do a clean flash, meaning you will wipe everything and format your SD card too, since you will have CWM recovery
1) First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power
button for a minute, than powerup without SIM and Ext.SD Card....
2) use combo keys to get into CWM recovery
a) wipe everything, data, cache, dalvik cache in advance
b) go into > mounts and Storage> format everything (except boot) repeat ..do it twice....than pull out battery and use combo keys to boot into download mode ( you will lose everything in your phone by doing this, hope you have backed up your contacts, images and game data etc) If you did not mout to USB storage first and copy the entire SD card to your PC first)
3) connect to PC, use ODIN3 and flash the JVU ROM with a 512 PIT file with repartitioning checked
Once it has booted , check your phone, check your SD card ( so that everything is functioning)
4) Flash the GB semaphore kernel and check again all is functioning, backup your efs before you try custom roms like this
Click to expand...
Click to collapse
After finishing step 3 my phone tries to install android but comes up with a Error. It only shows for a few seconds, so didnt have time to take a screenshot. It said someting about 'can't find directory samsung/music' ...'vox'.... Then the phone restarts and the samsung intro video starts but the video crashes after a few seconds and my phone restarts again. And again and again...
Not much luck so far )-:
eldoro said:
. It said someting about 'can't find directory samsung/music' ...'vox'.... Then the phone restarts and the samsung intro video starts but the video crashes after a few seconds and my phone restarts again. And again and again...Not much luck so far )-:
Click to expand...
Click to collapse
Fundamentally your problem seems to be related to an SVOX installation ( text to speech engine) you must have used when your phone was functioning ...which seems to be mounted and giving you this error
E:copy_dbdata_media:Can't unmount "/dbdata"
E:Format_volume failed to unmount "/dbdata"
so you need to get back into CWM > mounts and storage> unmount everything and also format everything including boot, after that , ( DO NOT BOOT phone after doing this)
after this pull out battery and this time include i9000 JVU bootloader + JVU + 512 PIT ( update bootloader and repartition TICKED and reboot UNTICKED )
after that flash again the JVU ROM and reboot phone
If this fails, we may need to downgrade the ROM to 2.2 and use a speedmod kernel and try, basically, your Internal SD partition is stuck on this one dbdata partition and you need to get it formatted to solve your SD problem ( looks like you are in luck as someone else had this problem earlier , read this thread and solved it.
suggest you use a note book to note down what you are doing (step by step) and what was the result to get to the bottom of solving this , once and for all, will be useful for others who may have this problem.
xsenman said:
Fundamentally your problem seems to be related to an SVOX installation ( text to speech engine) you must have used when your phone was functioning ...which seems to be mounted and giving you this error
E:copy_dbdata_media:Can't unmount "/dbdata"
E:Format_volume failed to unmount "/dbdata"
so you need to get back into CWM > mounts and storage> unmount everything and also format everything including boot, after that , ( DO NOT BOOT phone after doing this)
after this pull out battery and this time include i9000 JVU bootloader + JVU + 512 PIT ( update bootloader and repartition TICKED and reboot UNTICKED )
after that flash again the JVU ROM and reboot phone
If this fails, we may need to downgrade the ROM to 2.2 and use a speedmod kernel and try, basically, your Internal SD partition is stuck on this one dbdata partition and you need to get it formatted to solve your SD problem ( looks like you are in luck as someone else had this problem earlier , read this thread and solved it.
suggest you use a note book to note down what you are doing (step by step) and what was the result to get to the bottom of solving this , once and for all, will be useful for others who may have this problem.
Click to expand...
Click to collapse
Tried your first advice. Couldnt unmount SD Card and didnt saw a boot partition to unmount.... Flashed with JVU bootloader, JVU, 512pit like you said. Then flashed again JVU. Got the same result... didnt work. Still error messages.
Then flashed with ROM 2.2 and speedmod kernel. Could format the SD Card with CWM now... Again no result in the end. Didnt get the error messages though when android install... but still keeps rebooting when booting.
Then used the EZbase recovery kit, like described in the thread you gave me (althoug the thread is a bit old and hard to understand). Flashed everything in the kit with EZodin. Result: no error messages after reboot, but I can see it doesnt finish the first install. Then it reboots and gets stuck on the Samsung video..
Now trying to connect to my phone via ADB. Downloaden the ADB toolkit. Want to try this:
adb shell
mount /sdcard
su
parted /dev/block/mmcblk0
rm 1
rm 2
rm 3
quit
Its hard to understand if above commands fixed the problem in the thread you gave me... it's not very well described..
Do you have tips to connect to my phone through ADB? Downloaden ADB-toolkit and started adb-toolkit-main.cmd.
Reinstalled Samsung USB drivers..tried to connect in download mode and in recovery (with different CMW versions). Installed the drivers included in ADB-toolkit through zadig.exe.. tried in download mode and recovery...
eldoro said:
Do you have tips to connect to my phone through ADB? Downloaden ADB-toolkit and started adb-toolkit-main.cmd.
Reinstalled Samsung USB drivers..tried to connect in download mode and in recovery (with different CMW versions). Installed the drivers included in ADB-toolkit through zadig.exe.. tried in download mode and recovery...
Click to expand...
Click to collapse
suggest you just flash the Ezbase gingerbread rescue kit again, might solve it since your error message is not there anymore
xsenman said:
suggest you just flash the Ezbase gingerbread rescue kit again, might solve it since your error message is not there anymore
Click to expand...
Click to collapse
Flashed with ezbase_recovery_kit_gb. Powered down and flash the stock kernel first. Then flash with partitioning ticked. After reboot it starts to install, but reboots. Then I don;t get past the first Samsung screen. Installed the rooted kernel and rebooted.. didnt got passed the Samsung screen.
Then powered down again and flashed the ezbase_gb bootloader, After that I flashed again with PDA, SCS, Phone and pit (repartioning ticked). Rebooted and the phone starts installing but reboots when doing so. Then again don't get past Samsung Screen.
I;ve made a movie of the initial install. I don't get red error messages, but looked at the video in slomotion and noticed there is still a error message in yellow. Got you a screenshot: http://postimage.org/image/gxhu8tvf7/ Sorry for the lack of focus, it's hard to read.. Think the path in the screenshot is /system/csc/KOR/system
eldoro said:
Think the path in the screenshot is /system/csc/KOR/system
Click to expand...
Click to collapse
looks like all your earlier problems is solved but strange its not booting, try flashing a JVU Bootloader with an 803 PIT ( RePartition UNTICKED) from My Android Collections
after this try a custom ROM, meaning flash a semaphore kernel, after that do the wipes, after that mount to USB storage and copy i9000 CM 9.1 stable to SD card and flash it
xsenman said:
copy i9000 CM 9.1 stable to SD card
Click to expand...
Click to collapse
Did like you described. Didnt restart/reboot after flashing the bootloader and pit, went straight on to flashing semaphor... Hope I interpreted your description well....
Only when copying CM 9.1 to my phone, my phone restarts when it's halfway.... Tried it a few times, but can't copy the file to my phone...
eldoro said:
Did like you described. Didnt restart/reboot after flashing the bootloader and pit, went straight on to flashing semaphor... Hope I interpreted your description well....
Only when copying CM 9.1 to my phone, my phone restarts when it's halfway.... Tried it a few times, but can't copy the file to my phone...
Click to expand...
Click to collapse
you can try any other way to do it, you can even copy it in your EXt SD card and flash from there..which ever suits you.
Bottom line, the errors are not there, so you may just flash the ROM, twice or thrice to get it working
xsenman said:
you can try any other way to do it, you can even copy it in your EXt SD card and flash from there..which ever suits you.
Bottom line, the errors are not there, so you may just flash the ROM, twice or thrice to get it working
Click to expand...
Click to collapse
Installed CM9.1 from external SD card. Installing zip finishes without errors, but on boot it gets stuck on the cyanogenmod video. Reinstalled a few times, but no succes. Then flashed with semaphore Jellybean kernel and tried installing CM10nightly... no succes either didnt finisch install... Then flashed semaphore ICS kernel again and tried again with CM9.1.. Result: not errors installing, but freezes on boot...
Then I flashed again with cm9.1 and looked in the log after installing te zip. Seems there are errors! Screenshot of log: http://postimage.org/image/cp1devyfl/
eldoro said:
Seems there are errors!
Click to expand...
Click to collapse
Basically, it is CWM errors and not what you should solve first, you need to get your phone booting, so get back to Stock ROM , try Darkys Resurrection with PIT, IF all goes well try for CM 7 first...DO not Flash a CM kernel First, always flash the ROM and only after that, use the relevant kernel for that ROM
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
Have recently purshased a used galaxy s wich have a very strange problem: it stucks on the Galaxy S boot animation.
I have tried several full wipe stock roms with the usual wipe data, wipe cache, dalkik... before and after flashing. Have also tried several kernels (speedmode, semaphore ...) without success. The animated S is there for hours....
I can go to download mode and recovery mode without problems..
What i noticed are 2 things :
1) When flashing froyo stock firmware the boot animation is displayed and it's music is played normally till the animated S...and stuck there.
When flashing a Gingerbread JVU stock firmware the animation hangs at the first frame and resume after about 30 seconds to the end (the animated S)
When flashing ics rom i get, after the boot animation, the unencrypted message....
2) In recovery mode i can access the internal sd card (by mounting the usb storage in cwm) but cannot erase any file ? Actually the deletion process is achieved normally but after rebooting and reconnecting the pc all my files are still there.
I have also tried to delete the sdcard files by using the ADB rm command: files are deleted BUT after rebooting they are still here.
I have spent 3 days trying to fix my phone without success.
Do you think my galaxy s is hard bricked
Help me please and sorry for my bad english.
Don't think youi are bricked. Suggest at the least you need to flash a new ROM over whats on the phone (can be the same one or a newer one).
If it wer my phone I would be upgrading to CM10 - Jelly Bean. Go to the deveplopment forum and find out how to get from where you are to Jelly Bean. If you follow the steps it is not very hard. Good luck.
I had the same problem with mine. Don't give up, just keep up trying to flash a Rom. Can you put files on your Sdcard with the Recovery? If yes, you can try to a ROM like Cyanogenmod. If no, i would download a 3 files rom (samifirmware) and flash it with odin. If it's still stuck after the flash with Odin go to the recovery and do a Full Wipe.
Hope something works for you Sry for my bad english P
Fredclotz said:
Don't think youi are bricked. Suggest at the least you need to flash a new ROM over whats on the phone (can be the same one or a newer one).
If it wer my phone I would be upgrading to CM10 - Jelly Bean. Go to the deveplopment forum and find out how to get from where you are to Jelly Bean. If you follow the steps it is not very hard. Good luck.
Click to expand...
Click to collapse
Have flashed over what is in the phone 2 times without success (froyo ROM)
KUN1 said:
I had the same problem with mine. Don't give up, just keep up trying to flash a Rom. Can you put files on your Sdcard with the Recovery? If yes, you can try to a ROM like Cyanogenmod. If no, i would download a 3 files rom (samifirmware) and flash it with odin. If it's still stuck after the flash with Odin go to the recovery and do a Full Wipe.
Hope something works for you Sry for my bad english P
Click to expand...
Click to collapse
Have already copied Cyanogenmod zip file to an external sd card (can't copy to the internal..) and flashed it succesfully BUT the problem remains : the phone stuck in the animated logo (S).
Have moreover flashed several 3 files ROM with ODIN (including and excluding PIT 512) and made full wipe with the recovery BUT still the same problem.
Eddy25 said:
Have already copied Cyanogenmod zip file to an external sd card (can't copy to the internal..) and flashed it succesfully BUT the problem remains : the phone stuck in the animated logo (S).
Have moreover flashed several 3 files ROM with ODIN (including and excluding PIT 512) and made full wipe with the recovery BUT still the same problem.
Click to expand...
Click to collapse
If you have CWM format everything except bootloader at least 5 times or more before you attempt to flash a JVU with 512 PIT and repartitioned plus update boot loader ticked
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, & KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3
KUN1 said:
I had the same problem with mine. Don't give up, just keep up trying to flash a Rom. Can you put files on your Sdcard with the Recovery? If yes, you can try to a ROM like Cyanogenmod. If no, i would download a 3 files rom (samifirmware) and flash it with odin. If it's still stuck after the flash with Odin go to the recovery and do a Full Wipe.
Hope something works for you Sry for my bad english P
Click to expand...
Click to collapse
xsenman said:
If you have CWM format everything except bootloader at least 5 times or more before you attempt to flash a JVU with 512 PIT and repartitioned plus update boot loader ticked
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, & KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3
Click to expand...
Click to collapse
Have followed your advice without success. formatting system, cache, data was ok.
But when formatting sdcard i had this message :
" E:can't mount /dev/block/mmcblk0p1(or /dev/block/mmcblkO). (Device or resource busy). Error mounting /mnt/sdcard/!"
Any advice?
Eddy25 said:
" E:can't mount /dev/block/mmcblk0p1(or /dev/block/mmcblkO). (Device or resource busy). Error mounting /mnt/sdcard/!"
Any advice?
Click to expand...
Click to collapse
look at specific error in My Android Solutions for a solution.
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
http://forum.xda-developers.com/showthread.php?t=788850 try one of this.
http://forum.xda-developers.com/showpost.php?p=11337735&postcount=1
xsenman said:
look at specific error in My Android Solutions for a solution.
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Click to expand...
Click to collapse
Ok. I think that it is time to give up : I have connected it to my PC and tried a full FAT32 format of the sdcard and at 90% progress i got this windows notice : "Cannot complete the formatting process. sd card unreadable and corrupted". So for me it is now clear : my sd card is dead...
Nevertheless i will put an external sd card and try to install firmware on it... If someone knows how, please advice.
Eddy25 said:
Ok. I think that it is time to give up : I have connected it to my PC and tried a full FAT32 format of the sdcard and at 90% progress i got this windows notice : "Cannot complete the formatting process. sd card unreadable and corrupted". So for me it is now clear : my sd card is dead...
Nevertheless i will put an external sd card and try to install firmware on it... If someone knows how, please advice.
Click to expand...
Click to collapse
look at My Guides and Manuals for SD card partition, flashing with a broken SD card and Internal SD card problems
xsenman said:
look at My Guides and Manuals for SD card partition, flashing with a broken SD card and Internal SD card problems
Click to expand...
Click to collapse
Have formated a 8GB sdcard like this : 2GB Ext4 and the remaining FAT32. After putting it inside the phone and booting IT WORKED.
BUT BUT after powering off normally the phone and powering it on back there were no more booting and it stucks again at the animated S.??
Eddy25 said:
Have formated a 8GB sdcard like this : 2GB Ext4 and the remaining FAT32. After putting it inside the phone and booting IT WORKED.
BUT BUT after powering off normally the phone and powering it on back there were no more booting and it stucks again at the animated S.??
Click to expand...
Click to collapse
OK. Finally solved.
What i did is extracting initramfs , replacing mmcblk 0 strings by mmcblk1 and repacking the kernel. works like a charm with froyo but not withGB.
Hey Guys.
I'm in a bit of ****.
I did my first rom flash yesterday, and all worked well. However the system would reboot once every 12 or so hours.
I noticed when I did CWM Recovery 5.5, that the total data wipe failed, but I researched that it was an issue, and had been fixed in CWM 6.0
The rom description said that if a total data wasn't done, you would have problems.
So I flashed 6.0, and did the CWM Recovery again with all the wiping options, but when I went to 'install zip from sd card', the file wasn't there. I assumed that the contents of the card wouldn't move, or be deleted, but it obviously was.
Now when I followed the original guide on XDA, I did the backup as stated, but it must not have worked, as in restore it's telling me there's no backup file found.
So at the moment, all i'm getting is the Samsung Galaxy S3 loading screen, but it's not going beyond that.
All I can access is CWM, and the Downloading screen.
What can I do to get my phone accessible again?
Thanks
plug your phone to PC (with downloaded ROM)
go to cwm -> mounts and storage -> mount usb storage. Now you should see Phone SD card on your PC. Put ROM in main folder uplug and flash.
if it doesn't help you should flash via odin (at download mode) 3 file ROM (f.e. JW1) with pit512 and re-partition checked, then flash kernel with cwm and start fun with cwm flashing.
Keep your ROMs and gapps and kernels etc on microSD next time
I do that so when I flash a new ROM I just wipe and format everything. I know its not necessary to format SD, I just do it anyway to clean up folders from old apps etc.
Sent from my GT-I9000 using Tapatalk 2
Hey guys. I looked through the relevant threads that popped up before posting this, and none of the ones I hadn't already seen quite seemed to match the issue I am having.
The phone gets stuck on boot loop but I can force it to show the error we are talking about by going in to recovery mode and wiping the cache and factory resetting. Otherwise it just boot loops forever.
I have seen a few threads of similar issues, but they are all unresolved or their error is slightly different. In my case it is a
"(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:"
I read somewhere it is possible to use an external card to run the phone whilst you nuke the internal memory and reset tables etc before flashing some stock ROM again. I have a spare mSD already formatted as per this video (he uses an 8GB partitioned 6GB fat32 and 2GB reiser, I simply have double both since I am using a 16GB card), but now I am unsure of what to do exactly. I can't do anything with the phone itself, so I am stuck using download mode or the standard android recovery mode (no CWM).
have a look here http://forum.xda-developers.com/showthread.php?p=30415128
Had this happen to me when I was trying to go back to stock from CM 10.1. I am not sure how that happened, but I just flash a bunch of different roms through odin and it solved itself.
Possible solution
Hello. I've solved the same problem on my I9000. Here are the steps I followed:
I've used: Odin 1.70; 16GB Micro SDcard class 6; XWJW5 3 archives stock rom, pit file 512, CF root for JW5; CM9; Devil Kernel for i9000 and HellyBean 4.2.2.
1 - Format the 16Gb micro sd to FAT32.
2 - Turn device into Download Mode. I have flashed the HWJW5 stock rom with 3 files (PDA, CODE, CSC) with Odin 1.70, including 512 pit archive and Re-Partition ticked (all flashes with the micro sd inserted in the device). Micro sd is partitioned at boot installation. Restart into bootloop.
3-After flash, Download Mode again and flash the CF root for JW5.
4-After rooting, went into bootloop again. Remove the battery, remove the micro sd and connect it to PC (it shows only 13Gb FAT32, the rest remained for the Android system). I put in the micro sd the following files to flash in recovery, CM9 + Devil Kernel for i9000 + HellyBean 4.2.2.
5-I put the micro sd in the device, enter into recovery mode and flash CM9. After flashing the device turn on with CM7.
6 - Once in CM9, enter recovery again, flash Devil Kernel. Reboot recovery again, wipe all and flash HellyBean 4.2.2 (I think it should work with any CM10 or 10.1, I have not tried)
7-I have the device running 4.2.2 HellyBean from my micro sd with no problem (I've changed the vold.fstab for mass storage). He's back to life. Then I have installed CM10.1 Gapps.
Everything I used to do it you can find here on XDA.
Hope this can help you.
HellHammer83 said:
Hello. I've solved the same problem on my I9000. Here are the steps I followed:
I've used: Odin 1.70; 16GB Micro SDcard class 6; XWJW5 3 archives stock rom, pit file 512, CF root for JW5; CM9; Devil Kernel for i9000 and HellyBean 4.2.2.
1 - Format the 16Gb micro sd to FAT32.
2 - Turn device into Download Mode. I have flashed the HWJW5 stock rom with 3 files (PDA, CODE, CSC) with Odin 1.70, including 512 pit archive and Re-Partition ticked (all flashes with the micro sd inserted in the device). Micro sd is partitioned at boot installation. Restart into bootloop.
3-After flash, Download Mode again and flash the CF root for JW5.
4-After rooting, went into bootloop again. Remove the battery, remove the micro sd and connect it to PC (it shows only 13Gb FAT32, the rest remained for the Android system). I put in the micro sd the following files to flash in recovery, CM9 + Devil Kernel for i9000 + HellyBean 4.2.2.
5-I put the micro sd in the device, enter into recovery mode and flash CM9. After flashing the device turn on with CM7.
6 - Once in CM9, enter recovery again, flash Devil Kernel. Reboot recovery again, wipe all and flash HellyBean 4.2.2 (I think it should work with any CM10 or 10.1, I have not tried)
7-I have the device running 4.2.2 HellyBean from my micro sd with no problem (I've changed the vold.fstab for mass storage). He's back to life. Then I have installed CM10.1 Gapps.
Everything I used to do it you can find here on XDA.
Hope this can help you.
Click to expand...
Click to collapse
Great advice mate helped me out a lot. But could you please copy down the text in the "void.fstab" file that i would need to change as i am sortof a noob in this sort of region :silly:. the problem i seem to have is that i cant access gallery or camera as it says external sd not inserted i am using gamerzrom which i presume will be the same file directories as hellybean "e.g. : emmc" for external sd card. hope im making some kind of sense lol thanks mate :highfive:
This is the vold i have used for cm10.1.
I have this same exact error in my Samsung infuse 4g... Do you think that I could follow similar steps to help fix my error. I have two errors show up before bootloop
E:Can't mount /dev/block/mmcblk0p1
E:copy_dbdata_media:Can't mount SDCARD
Any help or direction appreciated
M