How to repair IMEI ? - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

Hi Guys,
Here is my case.
Phone: Samsung Galaxy 3 LTE I9305 – Optus Branded.
I have done the following mistakes:
1- I flashed I9300 ROM not I9305.
2- Then I tried selecting NAND Erase all from Odin3.
3- Then I tried to re-flash the rom by selecting PHONE not PDA.
The total damage is:
Phone: Unknown
RF CAL Date: Unknown
BaseBand version: Unknown
So I think I lost the IMEI , I have no backup for it. So I have no network connection anymore.
I was able to:
1- To restore the stock rom.
2- Install Triangle away and clear the counter and the status back official.
I tried the following solutions to recover the IMEI, but it didn’t work out:
1- To flash the Param_Bin_I9305.tar.
2- I tried to use EFS Pro to recover and repair the IMEI.
3- I tried NV-items_reader_writer and QPST but:
a- The COM status NO Phone in both apps.
b- I was not able to see the option “RMNET + DM + MODEM ” under Qualcomm USB Settings. I can see RNDIS + DM + MODEM and others and they didn’t help.
I think I tried all solutions provided in the forum , I would appreciate your advice on this.
Cheers,

mahmoudissam said:
Hi Guys,
Here is my case.
Phone: Samsung Galaxy 3 LTE I9305 – Optus Branded.
I have done the following mistakes:
1-I flashed I9300 ROM not I9305.
2-Then I tried selecting NAND Erase all from Odin3.
3-Then I tried to re-flash the rom by selecting PHONE not PDA.
The total damage is:
Phone: Unknown
RF CAL Date: Unknown
BaseBand version: Unknown
So I think I lost the IMEI , I have no backup for it. So I have no network connection anymore.
I was able to:
1-To restore the stock rom.
2-Install Triangle away and clear the counter and the status back official.
I tried the following solutions to recover the IMEI, but it didn’t work out:
1-To flash the Param_Bin_I9305.tar.
2-I tried to use EFS Pro to recover and repair the IMEI.
3-I tried NV-items_reader_writer and QPST but:
a-The COM status NO Phone in both apps.
b-I was not able to see the option “RMNET + DM + MODEM ” under Qualcomm USB Settings. I can see RNDIS + DM + MODEM and others and they didn’t help.
I think I tried all solutions provided in the forum , I would appreciate your advice on this.
Cheers,
Click to expand...
Click to collapse
Nand erase was a bad idea as this would have erased all your efs area also including your mac addresses for bluetooth and wifi. So the problem runs alot deeper and is far more serious.
Best thing to do is warranty replacement. Had you have not selected nand erase I could have recovered your device for you.
Sent from my GT-I9305 using Tapatalk 2

Hi lyriquidperfection,
Thank you for your response.
1- Actually I'm able to connect to WIFI and Bluetooth, So do you think the erase was not successful? Do you see any luck?
2- I took Kies backup for all items just before I did the mistakes, does it help?
Thank You.
lyriquidperfection said:
Nand erase was a bad idea as this would have erased all your efs area also including your mac addresses for bluetooth and wifi. So the problem runs alot deeper and is far more serious.
Best thing to do is warranty replacement. Had you have not selected nand erase I could have recovered your device for you.
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse

mahmoudissam said:
Hi lyriquidperfection,
Thank you for your response.
1- Actually I'm able to connect to WIFI and Bluetooth, So do you think the erase was not successful? Do you see any luck?
2- I took Kies backup for all items just before I did the mistakes, does it help?
Thank You.
Click to expand...
Click to collapse
I removed the IMEI from one Mobile to remove the SIM lock I still can call and use the mobile like before
TWRP Recovery can Backup EFS what recovery do you use?
Maybe you can generate your own efs area the IMEI should print inside the mobile

Hi frogfire,
Thank you for the info!
Actually I tried to do that using QPST but:
a-The COM status is NO Phone when I connect the phone.
b- I was not able to see the option “RMNET + DM + MODEM ” under Qualcomm USB Settings. I can see RNDIS + DM + MODEM and other options which dont help.
Any idea?
Cheers,

Any help guys?

take it to service

I took it to service and they wanna change the motherboard , is that the only option they have??

Ask them - they're the pros

mahmoudissam said:
I took it to service and they wanna change the motherboard , is that the only option they have??
Click to expand...
Click to collapse
Well you did wipe the NAND, nothing else you can do

Im not sure that NAND has been wiped successfully , because I can access the download option and the wifi is working.
Do you think it has been wiped and require a new motherboard?

mahmoudissam said:
Im not sure that NAND has been wiped successfully , because I can access the download option and the wifi is working.
Do you think it has been wiped and require a new motherboard?
Click to expand...
Click to collapse
You won't get more qualified help than from Samsung here. Exchange the board.

Thanks guys for the help anyway, I sent it to other service center, lets see how it goes.

So if they changed the main board, doesnt mean I will get new IMEI code for my phone?

mahmoudissam said:
So if they changed the main board, doesnt mean I will get new IMEI code for my phone?
Click to expand...
Click to collapse
Yes you will.
Sent from my GT-I9305 using Tapatalk 2

Hey liquidperfection. I have the same problem with no phone connected. I have not done a nand wipe. Is there any chance to get my baseband back
Sent from my GT-I9305 using xda app-developers app

winxuser said:
Hey liquidperfection. I have the same problem with no phone connected. I have not done a nand wipe. Is there any chance to get my baseband back
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Without a backup, not much.
The time to think about your IMEI number is BEFORE doing any flashing or modification to your device. Backing this up really should be the first thing anyone does before jumping into the fray.
Without a proper backup, you have an expensive media player.

going out on a whim here,, are we able to use someone elses backup to atleast get the stuff back then change the imei to our devices one?

winxuser said:
going out on a whim here,, are we able to use someone elses backup to atleast get the stuff back then change the imei to our devices one?
Click to expand...
Click to collapse
no

damn

Related

Phone does not connect to Network (started after being stuck at samsung logo)

Hi everyone,
I rooted my note and was using Jon ROM V3 for the last 3 months. Never had any malicious apps and my phone was working as usual.
Yesterday I took my phone and see that it is stuck at Samsung logo (an hour ago it was working fine). Tried reset and re-flashed ROM but no luck.
Later through download mode i flashed Official Indian Firmware(I live in India). Now I by passed the logo screen and the phone shows full signal bars but not able to connect to carrier network.
(tried all basic work out like removing battery/sim and re-inserting to phone and boot up)
I pressed power key and it did not show the power menu , it directly switched off mobile.
I rooted again with Philz kernel and flashed JON ROM. Still i see that my phone is not able to connect to any network. Also I observe that even here on this ROM when i press power key it directly turns off.
This is weird. I thought my IMEI was wiped off but im lucky to see that its still there.
I need your help. Im without my phone for the last 2 days now.
-
Jonathan
Note - I find that my IMEI number has been changed (to some generic IMEI 004999010640000) after i flashed the official firmware !!!! that's why it is not connecting to any network.
Someone please help me.
How did you flash the official firmware?
was it a tar file or a zip? I mean did you use odin?
chickoo.t90 said:
How did you flash the official firmware?
was it a tar file or a zip? I mean did you use odin?
Click to expand...
Click to collapse
It was a tar file The official Indian firmware I got from sammobile
either a glitch or you selected by accident clear efs.
anyways without efs backup hard to recover emei.
Do you get the simcard enter pinscreen on boot? If you dont then its not imei, if you do then you need someone like cvxcvx, search to fix it. That or Samsung
chickoo.t90 said:
How did you flash the official firmware?
was it a tar file or a zip? I mean did you use odin?
Click to expand...
Click to collapse
baz77 said:
either a glitch or you selected by accident clear efs.
anyways without efs backup hard to recover emei.
Do you get the simcard enter pinscreen on boot? If you dont then its not imei, if you do then you need someone like cvxcvx, search to fix it. That or Samsung
Click to expand...
Click to collapse
No I do not enter pin for simcard. I see my imei has been changed to 004999010640000. I tired fixing one problem and got onto another.
I guess there is no way other than sending my device to Samsung !
Anyways I appreciate your help. Thanks
jonastro said:
No I do not enter pin for simcard. I see my imei has been changed to 004999010640000. I tired fixing one problem and got onto another.
I guess there is no way other than sending my device to Samsung !
Anyways I appreciate your help. Thanks
Click to expand...
Click to collapse
You have a so called "developer IMEI". If you didn't safe your EFS then there is no real chance to restore it yourself.
There is a member (cxlcxl) who has hardware and can restore the original IMEI remotely.
But you still can use your device. Try to change the Sim Pin in the settings: you can use the same Pin for old and new (this is easier for me because sometimes I forget the new number).
After this the network connection should come back.
My workaround in my Pristine Custom Rom: one different jar-file that doesn't have the checks on startup from my old XXLSC dump. With this it works completely normal: Sim and Pin are always recognized from startup. I'm using this for many months now.
ThaiDai said:
You have a so called "developer IMEI". If you didn't safe your EFS then there is no real chance to restore it yourself.
There is a member (cxlcxl) who has hardware and can restore the original IMEI remotely.
But you still can use your device. Try to change the Sim Pin in the settings: you can use the same Pin for old and new (this is easier for me because sometimes I forget the new number).
After this the network connection should come back.
My workaround in my Pristine Custom Rom: one different jar-file that doesn't have the checks on startup from my old XXLSC dump. With this it works completely normal: Sim and Pin are always recognized from startup. I'm using this for many months now.
Click to expand...
Click to collapse
Thanks. BTW I jus gave my phone now to Samsung service center. They said its easy for them to restore my original IMEI and they charged me 150Rupess (3 Dollars) :good:
Really? Just $3
jonastro said:
Thanks. BTW I jus gave my phone now to Samsung service center. They said its easy for them to restore my original IMEI and they charged me 150Rupess (3 Dollars) :good:
Click to expand...
Click to collapse
sweet!
nokiamodeln91 said:
Really? Just $3
Click to expand...
Click to collapse
Aha , yes not joking.

[Solved] NV IMEI RESTORE ISSUE - Samsung i9305 optus AUS

IF THIS HAS BEEN SOLVED SOMEWHERE PLEASE TELL ME ASAP
sorry this is first post. Cheers
Hello XDA!
man ive nervous to post..
BUT i have come a null/null IMEI reading after a CM10.1 bootloop issue and trying to flash a new CM.
I have been a XDA follower for about 9 months but I have never needed to post for anything, as you have carried all of the lords answers. :angel:
I have done, stock firmware reset, Param bin, wiped all done it again. etc etc.
Many a conclusion has led me to probably a service repair centre.
I believe one option will still work for my IMEI restore but my phone comes up with a command that makes no sense.
Any help would be appreciated.
I am currently using QPST Configuration to write my IMEI back to my phone.
I have got these programs http://forum.xda-developers.com/showthread.php?t=1804117
Aswell as another handy IMEI converter to make sure my IMEI HEX conversion correct. (sorry cannot link. cannot find)
I have been using QPST and can follow all steps, except my phone WILL not show on on active phones.
I have reinstalled drivers and followed all necessary steps.
I have tried it in recovery mode also in QPST and no active phone still.
I believe i can get this to work, just need it to recognize my phone, and ill write the IMEI and hopefully..
Voila.. i can call the GF and tell her to chill. :good:
IS RNDIS different to RNMET? (how big of an impact will this play on the process)
In qualcomm settings i get "RNDIS + DM + MODEM" but i do not get "RNMET + "
SOLVED:FLASH PERSEUS KERNEL AND CALL GIRLFRIEND
samsung i9305
Unitized said:
IF THIS HAS BEEN SOLVED SOMEWHERE PLEASE TELL ME ASAP
sorry this is first post. Cheers
Hello XDA!
man ive nervous to post..
BUT i have come a null/null IMEI reading after a CM10.1 bootloop issue and trying to flash a new CM.
I have been a XDA follower for about 9 months but I have never needed to post for anything, as you have carried all of the lords answers. :angel:
I have done, stock firmware reset, Param bin, wiped all done it again. etc etc.
Many a conclusion has led me to probably a service repair centre.
I believe one option will still work for my IMEI restore but my phone comes up with a command that makes no sense.
Any help would be appreciated.
I am currently using QPST Configuration to write my IMEI back to my phone.
I have got these programs http://forum.xda-developers.com/showthread.php?t=1804117
Aswell as another handy IMEI converter to make sure my IMEI HEX conversion correct. (sorry cannot link. cannot find)
I have been using QPST and can follow all steps, except my phone WILL not show on on active phones.
I have reinstalled drivers and followed all necessary steps.
I have tried it in recovery mode also in QPST and no active phone still.
I believe i can get this to work, just need it to recognize my phone, and ill write the IMEI and hopefully..
Voila.. i can call the GF and tell her to chill. :good:
IS RNDIS different to RNMET? (how big of an impact will this play on the process)
In qualcomm settings i get "RNDIS + DM + MODEM" but i do not get "RNMET + "
SOLVED:FLASH PERSEUS KERNEL AND CALL GIRLFRIEND
Click to expand...
Click to collapse
which rom u flash i having i have been googling for and tried all th steps and solution can u help me it would kindful

[Q][GT-I9305] EFS, IMEI Repair

Okay everybody,
I decided to write a new thread for my problem because I think my prob is a very special thing.
I'm from germany, so please don't wonder about my english. I think it is a understandable.
The story begins with a software update for my GT-I9305. After the update, the IMEI was just "null", after some work with google I found out that the efs partition was broken. With my bad knowledge for this case, I destroyed the whole EFS folder. I installed perseus kernel. And, there it was! The whole and correct IMEI. The solution was the perseus kernel (stock doesn't work, neither reflash). But then, after a while the phone doesn't boot anymore. I flashed Android 4.4.4 and my phone was revived but the IMEI was again "null". I have no backup or anything else!
So I spent approximately 20 hours or more to understand the efs thing. I found much solutions but nothing worked for me. So, here I am.
What I've tried before
-reflash KitKat
-reflash Perseus (not compatible anymore)
-formatting efs partition for a blank and new EFS for editing
-tried to edit nv_data.bin with HEX
-tried to backup efs with a 3rd party app and edit this with hex (the app doesn't support my GT-I9305)
and then, there it was:
-tried to use a working EFS partition from another GT-I9305
-editing with Qualcomm NV Tools! (I think THIS is the solution!)
I tried NV-items_reader_writer (1.0) and EFS Professional (2.1.73), but in both can't find my phone:
What I've done in NV-items_reader_writer
-dialed *#7284#
-at "Qualcomm USB Settings": "RNDIS + DM + MODEM"
-enabled USB Debugging in phone
-connected the phone
-opened NV-items_reader_writer
-checked the both boxes near the SPC box
-selected the right port (last: COM4)
-clicked on "connect"
-clicked on "read"
-> here it search the phone, but it can't find it and says "Failed.. Phone does not answer"
What I've done in EFS Professional
-dialed *#7284#
-at "Qualcomm USB Settings": "RNDIS + DM + MODEM"
-enabled USB Debugging in phone
-connected the phone
-opened EFS Pro
-clicked on "Qualcomm NV Tools"
-refreshed the Available COM Ports
-selected "SAMSUNG Mobile USB Serial Port" (last COM4)
-clicked on "Connect"
-> Here it takes few seconds and he stops and says: "Phone connection has been lost!" and "Unable to send SPC to the Phone!"
What I've tried to solve this problem
-tried QUALCOMM USB Settings: "DM + MODEM + ADB"
-reinstall all Samsung drivers
-tried to install Samsung Modem with Qualcomm drivers (failed due to wrong platform; I've Win7 X64)
-reinstall Samsung Kies (for actual drivers)
-tried to dial *#9090# (in my case, this menu is totaly blank)
-tried in factory mode
It could be that I forgot some....
Now, my question to you all is, do you know what I've done wrong? I mean, this is working for the most users, but why not for me? What do you think? Did you think I really forgot something?
Some informations:
Phone: GT-I9305
Android: 4.4.4 KitKat
Kernel: Stock (3.0.31-2760029 ; [email protected] #1 ; Fri Sep 12 13:08:24 KST 2014)
Buildnumber: KTU84P.I9305XXUFNI3
Windows: Windows 7 X64
Do you need more informations? Post it!
Please help me, I want to bring this phone back to life!
And yes I know, to change the IMEI to a number which is not your own is ILLEGAL and to prevent this, it is not well seen to talk about, but this is MY PHONE and I want to change the "null" IMEI and IMSI to MY ORIGINAL IMEI. If this is a problem, I can send a PM to an mod with my phone (where you can see the IMEI), my username on a sheet of paper and the original box with the IMEI printed on. All on one picture!
Simply... I need a hero! Be MY HERO!
im in the exact same problem as you. the reason nv tools and efs reader is not seeing your phone is because you have NULL well usb wont work. so try installing the original 4.1.1 firmware, then install perseus, then nv tools and efs software will see your phone. if you end up fixing it please help me out. upgrading to a later firmware is where I get stuck. just stays on the boot logo. and like you said perseus isn't compatible. you seem to know how to use nv tools so hopefully you can get somewhere. as I don't no how to use it. GOOD LUCK.
take your phone to the samsung if you have warranty.otherwise give to a phone repair shop for repair because your problem can only be solved with special boxes and equipments etc, and they have it. it will not cost too much.
vnholden said:
im in the exact same problem as you. the reason nv tools and efs reader is not seeing your phone is because you have NULL well usb wont work. so try installing the original 4.1.1 firmware, then install perseus, then nv tools and efs software will see your phone. if you end up fixing it please help me out. upgrading to a later firmware is where I get stuck. just stays on the boot logo. and like you said perseus isn't compatible. you seem to know how to use nv tools so hopefully you can get somewhere. as I don't no how to use it. GOOD LUCK.
Click to expand...
Click to collapse
Thank you for your reply!
I tried this, already. But I can't downgrade from 4.4.4. I don't read very much about this. I just know that this is a new security option from samsung (or Android)... I will tell you when I know more
qasim799 said:
take your phone to the samsung if you have warranty.otherwise give to a phone repair shop for repair because your problem can only be solved with special boxes and equipments etc, and they have it. it will not cost too much.
Click to expand...
Click to collapse
Thank you for your reply!
The warranty is already expired...
This will be the last step I will do. Before this, I will try my very best to do this at home... But thank you for this tip
Edit:
What do you all think about this idea:
-I try to find somebody with a working EFS on GT-I9305 Android 4.4.4
-I get a backup from him
-I restore this backup to my phone
-I edit the duplicated IMEI with NV Tool to my IMEI
This requires that the NV Tool will with work with an existing IMEI and the the phone will be THE WHOLE TIME IN PLANE MODE to prevent IMEI ban...
What do you think? Will this work? Do I need somebody from germany (DBT) or is this not needed?
Take it to a phone repair shop they might have a way to fix it. And if they don't they might know someone who can and it would likely be cheaper than Samsung service center
Sent from my GT-I9305 using XDA Free mobile app
Identical case (Solved)
Hello partner!
I had the same problem with imei after years of using various roons.
In my case I had a rom lollipop, between a night and other My IMEI is gone. Follow almost the same steps you. After a long time searching the internet was found a case was solved by installing an original rom Samsung via Odin.
Just wiped everything on the recovery and follow this tutorial and today I am with my IMEI back, and well relieved.
I hope it helps you too.
droidviews.com/install-official-android-4-4-4-kitkat-firmware-samsung-galaxy-s3-gt-i9305
Obs. I used all the programs and drivers available in the tutorial. and installed only the samsung drivers. I did not need the KIES
Good luck!!!
When nothing is helping try to restore your Efs partition.:http://forum.xda-developers.com/galaxy-s3/general/how-to-fix-efailed-to-mount-efs-invalid-t2858056
WesleyPs said:
Hello partner!
I had the same problem with imei after years of using various roons.
In my case I had a rom lollipop, between a night and other My IMEI is gone. Follow almost the same steps you. After a long time searching the internet was found a case was solved by installing an original rom Samsung via Odin.
Just wiped everything on the recovery and follow this tutorial and today I am with my IMEI back, and well relieved.
I hope it helps you too.
droidviews.com/install-official-android-4-4-4-kitkat-firmware-samsung-galaxy-s3-gt-i9305
Obs. I used all the programs and drivers available in the tutorial. and installed only the samsung drivers. I did not need the KIES
Good luck!!!
Click to expand...
Click to collapse
Hey,
Thank you for your reply.
I reinstalled my windows yesterday. So I can try it with a whole clean OS.
I will response after testing. But actual I'm very busy. I will reply as soon as possible.
viktorak said:
When nothing is helping try to restore your Efs partition.:http://forum.xda-developers.com/galaxy-s3/general/how-to-fix-efailed-to-mount-efs-invalid-t2858056
Click to expand...
Click to collapse
Thank you, I will try this, too. But this is more if your efs isn't mounted. My partition is there but just clear.
I will tell my experience after testing.
€dit
Now I tried my idea with the EFS partition from somebody with a working GT-I9305. In my case, this isn't working... I think I must try the next step and try to repair it from a shop or so...
Hello,
someone could give me an EFS file because I deleted mine but my camera would not boot and remains on bootloop
thank you in advance
SurrendeR1993 said:
Hey,
Thank you for your reply.
I reinstalled my windows yesterday. So I can try it with a whole clean OS.
I will response after testing. But actual I'm very busy. I will reply as soon as possible.
Thank you, I will try this, too. But this is more if your efs isn't mounted. My partition is there but just clear.
I will tell my experience after testing.
€dit
Now I tried my idea with the EFS partition from somebody with a working GT-I9305. In my case, this isn't working... I think I must try the next step and try to repair it from a shop or so...
Click to expand...
Click to collapse
Repair shops aren't as expensive as you think to get my camera replaced all up cost 50$ au dollars and when I first got into Android I trashed heaps of phone's (low end thankfully) before I knew what the hell I was doing and never cost me more than 80$
---------- Post added at 05:00 AM ---------- Previous post was at 04:46 AM ----------
banjomike said:
Repair shops aren't as expensive as you think to get my camera replaced all up cost 50$ au dollars and when I first got into Android I trashed heaps of phone's (low end thankfully) before I knew what the hell I was doing and never cost me more than 80$
Click to expand...
Click to collapse
Sorry dude just found out only samsung can restore Imei give phone shop a try but I don't think they could sorry
I want to update all you guys.
I flashed the old bootloader so I was able to downgrade to Jelly Bean. There I installed perseus and now I could connect to the Network, but I don't want. IMEI ist still 0.
But now I can enter *#9090# menu. But I can still not connect the phone with any DM Prog
Sent from my GT-I9300 using XDA Free mobile app
SurrendeR1993 said:
I want to update all you guys.
I flashed the old bootloader so I was able to downgrade to Jelly Bean. There I installed perseus and now I could connect to the Network, but I don't want. IMEI ist still 0.
But now I can enter *#9090# menu. But I can still not connect the phone with any DM Prog
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
If you were to 4.4.4 Official Stock rom can`t do downgrade the bootloader.What you have done is downgrade to Firmware with extracted knox bootloader.But you still with EFS corrupt partition.
viktorak said:
If you were to 4.4.4 Official Stock rom can`t do downgrade the bootloader.What you have done is downgrade to Firmware with extracted knox bootloader.But you still with EFS corrupt partition.
Click to expand...
Click to collapse
Hm okay. I applied a "old bootloader" before here from xda. I don't know what it was exactly. There was a boot.so or so in it.
I will try my best. I mean, if I can beat this, this is a really great success for me. My next step is to restore a full NAND backup from a friends of mine (from a GT-I9305).
I wondered about that, after I restored a working EFS, there were no NV data.
My journey to restore a corrupted GT-I9305 without pay some money
Sent from my GT-I9300 using XDA Free mobile app
how did you success ?
how did you success ?
Hi guys, i had the same issue: after a botched restore of nandroid backup (something to do with it being over 2GB, different story though), I lost IMEI (null/null) and no baseband.
I was running CM so I tried to flash the original Samsung ROM, to no avail. Then a whole bunch of other stuff that didn't work, until:
- I flashed kitkat (which failed due to some error in the install script, dunno why)
- then flashed my last nandroid, which I had already flashed with no restoration of phone functionality, HOWEVER,
- I then flashed over that nandroid the modem files (see here: dropbox.com/sh/d2ljv1ylvr9nvib/M7UzMgux4f) , mine was Modem-I9305-XXUENE2.zip for i9305 LTE Intl.
- tadaa! fixed
hope this helkps anyone, took me some 20 hours of tinkering
Oakhand said:
Hi guys, i had the same issue: after a botched restore of nandroid backup (something to do with it being over 2GB, different story though), I lost IMEI (null/null) and no baseband.
I was running CM so I tried to flash the original Samsung ROM, to no avail. Then a whole bunch of other stuff that didn't work, until:
- I flashed kitkat (which failed due to some error in the install script, dunno why)
- then flashed my last nandroid, which I had already flashed with no restoration of phone functionality, HOWEVER,
- I then flashed over that nandroid the modem files (see here: dropbox.com/sh/d2ljv1ylvr9nvib/M7UzMgux4f) , mine was Modem-I9305-XXUENE2.zip for i9305 LTE Intl.
- tadaa! fixed(
Click to expand...
Click to collapse
Can you post the links you used?
EwOkie said:
Can you post the links you used?
Click to expand...
Click to collapse
aside from the dropbox link in my post above I did not use much else. I downloaded a stock kitkat rom, but don't know from where.

nv data corrupted

Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?
sk3lt said:
Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?
Click to expand...
Click to collapse
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.
otonieru said:
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.
Click to expand...
Click to collapse
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?
sk3lt said:
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?
Click to expand...
Click to collapse
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?
otonieru said:
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?
Click to expand...
Click to collapse
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.
sk3lt said:
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.
Click to expand...
Click to collapse
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.
otonieru said:
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.
Click to expand...
Click to collapse
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?
sk3lt said:
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?
Click to expand...
Click to collapse
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?
sk3lt said:
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?
Click to expand...
Click to collapse
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.
tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
tsongming said:
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.
Click to expand...
Click to collapse
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned
sk3lt said:
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned
Click to expand...
Click to collapse
use testpoint method, and flash it using QFIL.
otonieru said:
use testpoint method, and flash it using QFIL.
Click to expand...
Click to collapse
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?
sk3lt said:
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?
Click to expand...
Click to collapse
root cause of your issue is that you play with wrong qcn and messed up the nv,
wince you cant plugged to qpst, you need someone to make EFS backup for you torestore from twrp
You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work
How can I do this? Can you help me please?
jokerm90 said:
You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work
Click to expand...
Click to collapse
How can I do this? Can you help me please?
Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.
sk3lt said:
How can I do this? Can you help me please?
Click to expand...
Click to collapse
You need backup EFS and Modem via TWRP first(better with OrangeFox). After you need Magisk first and some manipulation with QCN file via QPST. I will write it later
MohamedYousri said:
Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.
Click to expand...
Click to collapse
Maui Meta is for MTK cpu phones. You need QPST
Note 8 Pro is MTK Device

Question Help with an unbricked Poco M3 Pro

Hello guys, after some struggle trying to unbrick my poco m3 pro, i faced a new probem, my IMEI has gone, as a noob that i am, i didn't made any kind of backup, i'm trying alot of ways, and still i didn't had any luck to re-write my IMEI (i still jave the numbem on the box of the phone) to the device, i'm using linux, almost everything that i found is to windows, does jave any kind of tool for linux, or i'll have to put windows on my laptop just for this porpouse?
there is anychance to use mtkdrive tool, the same used to bypass security for sp tools to do this ?
thanks for now
if your mobile services works, write imei is not necessary. and it's a dangerous operation. so if your devices now works fine, my suggestion is DON'T TOUCH ANYTHING
all my old phones that after modding lost originals imei worked without problems
a mobile sim could work also with all imei numbers=0
sadly my mobile service don't work, i keep zero signal, and when i try to get IMEI numbers on Settings > About device, it says unknown on both IMEis
ok
first try your sim into another device to be sure is not damaged
second search xiaomi redmi note 10 5g fastboot engineering rom and flash. this rom should repair some high problems like your.
if boot and all work fine, update to miui13. good luck
wetito said:
ok
first try your sim into another device to be sure is not damaged
second search xiaomi redmi note 10 5g fastboot engineering rom and flash. this rom should repair some high problems like your.
if boot and all work fine, update to miui13. good luck
Click to expand...
Click to collapse
thx, i'll try to find that rom, i already tried my sim on another devices, and works flawless
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
MTK IMEI Repair Tool Download (All Version) Updated 2022 | Mi Account Guide
When you have an MKT Android device, you can use an MTK IMEI Tool to flash or repair IMEI on your device. In order to make your damaged device functional
miaccountguide.com
i found this tool... maybe should work. but u had to test by yourself... this website have other utility that u could try. but now u have signal? data mobile?
wetito said:
MTK IMEI Repair Tool Download (All Version) Updated 2022 | Mi Account Guide
When you have an MKT Android device, you can use an MTK IMEI Tool to flash or repair IMEI on your device. In order to make your damaged device functional
miaccountguide.com
i found this tool... maybe should work. but u had to test by yourself... this website have other utility that u could try. but now u have signal? data mobile?
Click to expand...
Click to collapse
in mtk without box/server patch only sim 2 repair
Yonecloud said:
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
Click to expand...
Click to collapse
not work nv data/ram with out patch firmware ect,you only can return imei 2 for original.
shinobusensui said:
not work nv data/ram with out patch firmware ect,you only can return imei 2 for original.
Click to expand...
Click to collapse
U tryed put SIM on slot 2 with imei2 restored? Coul be a solution? Could u post a screenshot of phone information? (Tap 4 time internal storage
wetito said:
U tryed put SIM on slot 2 with imei2 restored? Coul be a solution? Could u post a screenshot of phone information? (Tap 4 time internal storage
Click to expand...
Click to collapse
its only information and you can use Maui Meta in Meta mode if you enter edl/testpoint, for me the first time lost two imei only return The Second imei, but send to waranty and change the Phone.
of coursed use a Semi Profesional Tools.
Did you find a fix? And where did you go wrong? Please let us know the mistakes you made so that we don't.
shinobusensui said:
its only information and you can use Maui Meta in Meta mode if you enter edl/testpoint, for me the first time lost two imei only return The Second imei, but send to waranty and change the Phone.
of coursed use a Semi Profesional Tools.
Click to expand...
Click to collapse
ok, so at least one of yours sims work. goog luck
Yonecloud said:
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
Click to expand...
Click to collapse
can i ask where did you get the eng rom?

Categories

Resources