[Q]Hardware bricked USB connector or just software prob? - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello,
few days ago I've got my USB OTG cable. So, when I connected this OTG cable to my USB HUB through USB cable with 2 sides of type A port (pic here : http://www.cyfronika.com.pl/art93/kab120aa-l.jpg) to get power on HUB from USB port charger but nothing happened on phone with flash storage, any notifications or something. Then, when I wanted to transfer some files from my computer to sdcard. I've connected USB cable but Windows 7(32-bit) says that my device can be damaged or something (code 43). I've searched about this and found this http://pcsupport.about.com/od/errorc/a/code-43-error.htm . I've used http://forum.xda-developers.com/showthread.php?p=21503469 for setting up the OTG and for kernel too.
Well, I've followed this tutorial but the error still appears. Tried on 3 computers with different cables and different USB ports.
So just tell me if it's software problem or I must do something with this.
LOGCAT : http://pastebin.com/gbqqDxay
LOGCAT_radio : http://pastebin.com/H4dU9JWX
dmesg : http://pastebin.com/tkicx7xb
Logs has been taken after USB cable connecting.
Thanks

(bump) can anyone help me?

(bump again)

(bumpin' like a crazy) Please, anyone have solution for this problem?

So the general idea is, you're trying to let your phone connect to other hardware while the phone is the host, right?
Now you're trying to connect your computer to your phone again normally and it's not working? (normal usb cable)
For one, there are a bunch of errors in the log you posted, thinks like
Code:
W/PackageManager( 353): Unknown permission android.permission.ACCESS_SUPERUSER in package hu.sztupy.android.usbhostcontroller
That might be a problem, I don't know. Perhaps you're better off asking the dev of this mod about these errors. Maybe there's something you forgot or wasn't mentioned in your guide that causes these?
Have you also considered the possibility your phone is now *always* trying to be the host (which is not going to be something a pc likes)? You're saying you can't properly connect with your pc any more, but can you connect with another device (usb stick for example)?

Marshian said:
So the general idea is, you're trying to let your phone connect to other hardware while the phone is the host, right?
Click to expand...
Click to collapse
Yes, It was the general idea when I've bought OTG cable.
Marshian said:
Now you're trying to connect your computer to your phone again normally and it's not working? (normal usb cable)
Click to expand...
Click to collapse
Yes, tried with 2 Nokia cables and one stock from Samsung. Windows is always showing code 43 ;/
Marshian said:
That might be a problem, I don't know. Perhaps you're better off asking the dev of this mod about these errors. Maybe there's something you forgot or wasn't mentioned in your guide that causes these?
Click to expand...
Click to collapse
Well, I'll try to contact with @sztupy (http://forum.xda-developers.com/showthread.php?t=1468531). Anyways I think I haven't forgotten what I wanted to write.
Mashian said:
Have you also considered the possibility your phone is now *always* trying to be the host (which is not going to be something a pc likes)? You're saying you can't properly connect with your pc any more, but can you connect with another device (usb stick for example)?
Click to expand...
Click to collapse
I've set default settings for USB Host Controller app. But no, I can't connect another device. I'm in half way to download Linux, maybe on it everything will be working properly.
Anyway thanks for your reply, let's see if it will be working on Linux ;f
//EDIT : Same problem on Linux. Device is not recognized.

(bump) Any ideas?

(bump)
ADDED MORE LOGS.

Related

[Q] Tried tons of links to drivers on multiple threads. cant connect phone to pc.

So for 3 days now i have been reading thread after thread on xda. i cant seem to connect my phone to my computer. Every time i come across a new link to drivers i try it but still no dice.
What happens:
Install Drivers
Phone set to mass storage
plug usb in
mount sd
windows thinks...
USB Device not recognized
Phone: Captivate, stock everything (with ota update)
OS: Windows 7 64 bit
What am i doing or not doing?
I apologize in advance if i have not stumble across thread where this has already been answered.
hacklerg said:
So for 3 days now i have been reading thread after thread on xda. i cant seem to connect my phone to my computer. Every time i come across a new link to drivers i try it but still no dice.
What happens:
Install Drivers
Phone set to mass storage
plug usb in
mount sd
windows thinks...
USB Device not recognized
Phone: Captivate, stock everything (with ota update)
OS: Windows 7 64 bit
What am i doing or not doing?
I apologize in advance if i have not stumble across thread where this has already been answered.
Click to expand...
Click to collapse
Try uninstalling all the drivers and try one again using x64 (I know you probably did it already, but just confirming).
Maybe try doing a factory reset?
So i uninstalled the drivers using the uninstaller application that came with the download then i deleted the files off the computer.
went to the captivate wiki on xda, downloaded the 64 bit drivers from that link (look exactly the same as the other links), then ran the installer application from that download.
what happened was at the end of the install wizard it said that: "mss install wizard was not completed... install wizard was not succesfully installed samsung usb driver for mobile phones.".
I did however notice that at one point in the wizad it called the driver x86 instea of x64.
i would be lieing if i didnt say i hated samsung right now. o yea and i think at&t too. ha ha
Thanks for the help! : )
so in addition to hours spent on other days, im about 5 hours into trying to make the phone connect today.
it seems worse now, it only sometimes sees a device it cant recognize.
i tried more batches of driver uninstall/installs and i even downloaded the full kies.
nothing seems to make it go. im about to lob this thing across the room. any other suggestions or people with a similar problem?
any help would be much appreciated.
1) Scrub your system again of all Samsung drivers.
2) Go to Samsung Software & Firmware Downloads and get the Mini Kies program.
3) Install Mini Kies, this will install drivers.
4) Set USB settings on phone to ask on connection, Settings>Applications>USB Settings>Ask on Connection
5) Connect phone to computer
6) Select Mass Storage when the phone asks
7) Mount phone to computer, depends on which ROM you are running
8) Report back,
I'm running Windows 7 x64 Home Premium and have no troubles connecting. Hope this helps.
ok thanks for the tips.
Here's what i did:
Download mini kies from the link (i noticed that there were driver there to but i did not download that link)
Set phone to ask on connection
plug phone into computer
set to mass storage.
mount sd card
computer says "usb device not recognzed"
Mini Kies still says "please connect mobile phone"
i scream!
what do you suggest i do from here?
hacklerg said:
ok thanks for the tips.
Here's what i did:
Download mini kies from the link (i noticed that there were driver there to but i did not download that link)
Set phone to ask on connection
plug phone into computer
set to mass storage.
mount sd card
computer says "usb device not recognzed"
Mini Kies still says "please connect mobile phone"
i scream!
what do you suggest i do from here?
Click to expand...
Click to collapse
Have you tried a rear USB port instead of a front? I don't know why but many have claimed this was the trick. It should not work, but for some reason it does for some.
alphadog00 said:
Have you tried a rear USB port instead of a front? I don't know why but many have claimed this was the trick. It should not work, but for some reason it does for some.
Click to expand...
Click to collapse
The usb ports on the back of the computer are usually connected directly to the motherboard. The usb ports located other places on the computer are usually connected to the mother board via a secondary card of some type - this adds another level of hardware and software drivers required to make those ports work. Also it is not unusual for some usb to operate at different power levels - often referred to as powered and non powered ports.
So not all ports are the same which is why some people have different results on different ports on their computer.
One other option that sometimes works: turn on usb debugging in settings/applications/development. Then connect the usb. Pull down the notification window and select the button that says something like "select to copy files...". This brings up a dialogue box asking to mount the phone, and you select that.
Sent from my SAMSUNG-SGH-I897 using XDA App
alright i tried
every single usb port (it a laptop btw sorry should of said that earlier)
and also with and without debugging
computer still says usb device not recognized.
is there any more info that anyone needs? Tried hooking the phone up to a mac also (snow leopard osx laptop) no luck still.
dayv said:
The usb ports on the back of the computer are usually connected directly to the motherboard. The usb ports located other places on the computer are usually connected to the mother board via a secondary card of some type - this adds another level of hardware and software drivers required to make those ports work. Also it is not unusual for some usb to operate at different power levels - often referred to as powered and non powered ports.
So not all ports are the same which is why some people have different results on different ports on their computer.
Click to expand...
Click to collapse
I have built many machines and never had a device work on one USB port and not on another.
All my USB devices that require power, require an actual AC adapter -As for unpowered ports - never heard of that. Powered and unpowered hubs yes - but not unpowered ports.
alphadog00 said:
I have built many machines and never had a device work on one USB port and not on another.
All my USB devices that require power, require an actual AC adapter -As for unpowered ports - never heard of that. Powered and unpowered hubs yes - but not unpowered ports.
Click to expand...
Click to collapse
First, just to make this clear all usb ports are powered, and so long as they are in compliance with the usb standard they are powered to 5v.
Second, what you referring to with powered/non powered usb hubs is a usb hub that has a secondary power source (ie includes ac power cable maybe) vs a usb hub that is only powered by the usb serial bus via the usb connecter to the computer.
What was referring to in powered/non powered usb port is a technology included in some ports that allows that port to use the power of two usb ports in one port - not sure but I believe it is an ibm technology - which is some times referred to slangly and inaccurately as powered usb
Now the point of my post was to point out even though there is a universal standard for usb - depending on how these ports are actually connected to the serial bus on the mother board will affect they way they perform - ie usb on the back of the computer that is mounted directly to the mother board serial bus vs one connected via a pci card.
And even though you have never experienced differing performance in your usb ports does not mean that it doesn't happen - it is actually quite common particularly with devices that both connect via usb as well as charge its battery via usb.
I currently have a computer with 7 usb ports all of which will connect and work with my wife's ipod - but I have found two of these ports that will not charge her ipod. most likely this failure to charge her ipod is due to the hardware (or the software driver for the said hardware) in between these two ports and the mother board.
In all of the computers you have built have you built any that had usb ports mounted directly on the mother board serial bus that you also connected a usb pci card to allow for more usb ports? I guarantee you if you do this often enough you wil eventually build a computer that has usb ports with differing performance.
while the info on usb is nice : ) i would very much appreciate any help on gettingmy phone connected. thanks!
hacklerg said:
while the info on usb is nice : ) i would very much appreciate any help on gettingmy phone connected. thanks!
Click to expand...
Click to collapse
I'm guessing by now you have tried all your ports, lol. have you tested your phone on other computers and/or with other usb cables?
One thing to try is check and see if there are any driver updates for the usb hardware in your computer. You can usually find these updates with the computer vendor and/or mother board manufacturer support.
Sorry I missed your post earlier about connecting to a mac - when you connected to the mac was your phone in debugging mode?
I don't know if it is necessary to connect to a mac, but to get some linux distros to mount the drives in cappi it has to be in debugging mode and while linux and NEXTstep are different they are in the same family, have the same ancestor. maybe if someone with a mac read s this they can let us know if it is needed.
If you keep connecting to different computer with no luck, try a different usb cable.
Actually its connecting to a pc. I just tried to connect to a mac wouldn't work there either.
But I've tried all the different combos of debugging and mass storage options it just says it doesn't recognize the usb device.
I have tried a bunch of different drivers and using both kies and mini kies.
Windows 7 64 bit
Laptop
Captivate (stock everything)
Sent from my SAMSUNG-SGH-I897 using XDA App
hacklerg said:
Actually its connecting to a pc. I just tried to connect to a mac wouldn't work there either.
But I've tried all the different combos of debugging and mass storage options it just says it doesn't recognize the usb device.
I have tried a bunch of different drivers and using both kies and mini kies.
Windows 7 64 bit
Laptop
Captivate (stock everything)
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
getting unrecognized usb device is almost certainly a driver issue - what ever kept it from working with the mac is something else.
have you downloaded and installed the drivers dg has linked in his odin 3 one click thread?
Second have you had a chance to check if your computer had any usb driver updates? One of my machines would not properly identify my phone that I tried reinstalling drivers on and I found there was and update for the mother board usb controller - after updating it instantly recognized it.
I am having the same issue with an added twist, which is that some USB ports will rapidly disconnection/reconnect the device to windows even though I havent unplugged it.
I have/had adb working on both my old laptop, and desktop. And like the OP I have spent many hours trying to get this to work. Very frustrating.

Massive Storage not working in T813, computer does not detect

Hello fellas,
I have a problem with my brand new T813 running the latest official firmware available (Android 7).
Massive storage is not working, my computer running Windows 10 with updated samsung drivers has failed to detect it. The device charges, but I am unable to modify the usb options, regardless the choice MTP always remain.
I have tried with three different cables, all of them work fine with my S7, the computer never detects the device, eventhough it's charging. This means it is not a problem with the device's micro usb port. I have the latest drivers, and I have also tried with all usb ports. None of them seemed to do the trick.
The computer has faulty usb 3 drivers, ever since I have installed Windows 10, the speed is not what used to be with the previous configuration. I have the same drivers, I don't understand what's wrong.
Any help would be appreciated, I have tried most solutions mentioned on this community and they didn't work. I can't flash the device because it is never detected. The problem still persists after a restablishment via the menu.
Download mode shows
QUALCOMM SECURE BOOT: ENABLE (CSB)
FRP LOCK IS OFF
[UPDATE] 06/08 11 AM
Left the device at SAMSUNG ARGENTINA repair shop. Also had to pay 300 pesos (around 20 dollars) as a diagnostic fee, they told me that if I accept the repair cost later on, they would discount the 300 pesos I have paid out of the total price. And if I don't, they will keep the money.
Will update again when Samsung calls me in a couple of days. Maybe this monday, I hope so.
[UPDATE] 06/08 15 PM
I have just received an email from BGH, which is the SAMSUNG ARGENTINA official partner for repairs. They told me that the problem is a FAILURE on the SUB board.
http://www.ebay.com/itm/Micro-USB-C...g-Galaxy-Tab-S2-9-7-034-SM-T813-/322414846816
The good thing, is not that expensive. The bad thing, this tablet hasn't arrived officially to Argentina, and since it has been bough in Chile, the guys at SAMSUNG ARGENTINA had to request an international order replacement, which I have been told it could take some time. But they will eventually get the piece.
Will update again.
What does device manager report when the device is connected?
Sure you don't have ADB enabled? Disable developer settings and try again.
ashyx said:
What does device manager report when the device is connected?
Click to expand...
Click to collapse
Thanks for replying, please refer to first screenshot. No Mass Storage option appears after connecting device. MTP option seems to be forced, i am unable to change it.
The tablet is brand new, but the guy who sold it to me said that it has always been working. He even told me that it has been barely used, and that the device is recognized when connected to an usb audio system. It has been upgraded to 7.0.1 a couple of days ago, maybe that's the problem.
I have just tried with a macbook air and it didn't detect it either, it is only charging. The same computer has detected my S7.
hemp_invader said:
Thanks for replying, please refer to first screenshot. No Mass Storage option appears after connecting device. MTP option seems to be forced, i am unable to change it.
The tablet is brand new, but the guy who sold it to me said that it has always been working. He even told me that it has been barely used, and that the device is recognized when connected to an usb audio system. It has been upgraded to 7.0.1 a couple of days ago, maybe that's the problem.
I have just tried with a macbook air and it didn't detect it either, it is only charging. The same computer has detected my S7.
Click to expand...
Click to collapse
Modern devices don't use mass storage anymore, they use the MTP protocol.
You should see your storage folders pop up in my computer.
fonetyk said:
Sure you don't have ADB enabled? Disable developer settings and try again.
Click to expand...
Click to collapse
Thanks for replying. ADB and USB debugging activated, I have also performed a factory reset and the problem still persists.
Using a microSD didn't help either.
hemp_invader said:
Thanks for replying. ADB and USB debugging activated, I have also performed a factory reset and the problem still persists.
Using a microSD didn't help either.
Click to expand...
Click to collapse
What usb options do you get when swiping down the notification shade?
ashyx said:
What usb options do you get when swiping down the notification shade?
Click to expand...
Click to collapse
There is no notification when I plug in the cable, that is the problem.
hemp_invader said:
There is no notification when I plug in the cable, that is the problem.
Click to expand...
Click to collapse
Does you get any kind of connection in DOWNLOAD mode, can odin see the device?
ashyx said:
Does you get any kind of connection in DOWNLOAD mode, can odin see the device?
Click to expand...
Click to collapse
Sadly nothing at all, the device only charges via usb. This is very confusing because the guy who sold it to me said it was working, but he has also said that he has never plugged it in a computer.
hemp_invader said:
Sadly nothing at all, the device only charges via usb. This is very confusing because the guy who sold it to me said it was working, but he has also said that he has never plugged it in a computer.
Click to expand...
Click to collapse
There are no error codes in device manager when the device is plugged in?
ashyx said:
There are no error codes in device manager when the device is plugged in?
Click to expand...
Click to collapse
Nothing, not even an unknown device. I'm lost here.
hemp_invader said:
Nothing, not even an unknown device. I'm lost here.
Click to expand...
Click to collapse
I think you need to try another pc.
ashyx said:
I think you need to try another pc.
Click to expand...
Click to collapse
I have tried with a mac and nothing has happened, it is only charging. The same computer has detected my s7.
A lot of people seem to have experienced this problem, the remaining solutions I didn't try are using other pc or try cleaning the female port with isopropilic alcohol. Hope it does the trick, otherwise I'm screwed.
I will try at work tomorrow.
ashyx said:
Modern devices don't use mass storage anymore, they use the MTP protocol.
You should see your storage folders pop up in my computer.
Click to expand...
Click to collapse
That is the problem, when I connect the cable nothing happens, it is only charging. Windows doesn't even detects it as an unknown device and neither does mac osx.
I didn't know mass storage is not used anymore, I think my S7 does have it and it works. I will try at work tomorrow.
When the problem appears with different USB cables and in different computers, as in your case, you have to look into the possibility that it may be a hardware issue.
I hope I'm wrong about this, but it sounds like the DATA+ or DATA- pin is damaged in your micro usb socket (pins 2 and 3, see http://pinouts.ru/PortableDevices/micro_usb_pinout.shtml)
fonetyk said:
When the problem appears with different USB cables and in different computers, as in your case, you have to look into the possibility that it may be a hardware issue.
I hope I'm wrong about this, but it sounds like the DATA+ or DATA- pin is damaged in your micro usb socket (pins 2 and 3, see http://pinouts.ru/PortableDevices/micro_usb_pinout.shtml)
Click to expand...
Click to collapse
Yes, I'm afraid it could be a hardware problem. But that would also mean the guy who sold it to me is lying. I have to say it, the device looks like it has been treated with care. However, i have noticed the plastic has worn out a little near the usb port, those black marks could indicate not so much care when plugging or unplugging the cable.
I hope we are both wrong about this. Tomorrow i will know. Fixing this is a pain in the ass, right?
hemp_invader said:
Yes, I'm afraid it could be a hardware problem. But that would also mean the guy who sold it to me is lying. I have to say it, the device looks like it has been treated with care. However, i have noticed the plastic has worn out a little near the usb port, those black marks could indicate not so much care when plugging or unplugging the cable.
I hope we are both wrong about this. Tomorrow i will know. Fixing this is a pain in the ass, right?
Click to expand...
Click to collapse
¡Che! Replacing the microusb receptacle would not only be a pain the ass, but if you make a tiny mistake while soldering or desoldering you can end up with a bricked tablet.
Anyway, let me know what you find out tomorrow, good luck boludo.
fonetyk said:
¡Che! Replacing the microusb receptacle would not only be a pain the ass, but if you make a tiny mistake while soldering or desoldering you can end up with a bricked tablet.
Anyway, let me know what you find out tomorrow, good luck boludo.
Click to expand...
Click to collapse
Actually not too bad as the Micro USB port is a module and can simply be swapped out.
http://m.ebay.com/itm/Micro-USB-Cha...-Tab-S2-9-7-034-SM-T813-SM-T819-/361834576986
ashyx said:
Actually not too bad as the Micro USB port is a module and can simply be swapped out.
http://m.ebay.com/itm/Micro-USB-Cha...-Tab-S2-9-7-034-SM-T813-SM-T819-/361834576986
Click to expand...
Click to collapse
I didn't know this tablet had a modular micro usb port, that's great ! :good:

Problem with OTG&USB N950F

Hi everyone
here I've got a terrible issue with my note 8 and SAMSUNG USB OTG.
When I connect my otg and a flash memory to phone, nothing happens, unless you force restart the phone while the otg is connected. After booting I can access to my flash memory but after removing the otg and reconnecting it, again nothing happens unless force restarting.
I've tried everything possible. Downgrading, upgrading, 4 files rom, pit file, rom from different zones, but still have the problem. I have no other issues regarding the USB port and charging, fast charging, connection to computer and any other stuff works fun but this OTG.
I wanted to know if anyone have any solutions for my problem or if anyone had the same issue or not.
it is also worth to mention that I have not rooted my phone due to warranty issues, and for that I haven't tested any kernels.
thanks for everyone
Sent from my SM-N950F using Tapatalk
That isn't right... As soon as I plug in my OTG USB key it detects it, no restart required.
alex00006 said:
Hi everyone
here I've got a terrible issue with my note 8 and SAMSUNG USB OTG.
When I connect my otg and a flash memory to phone, nothing happens, unless you force restart the phone while the otg is connected. After booting I can access to my flash memory but after removing the otg and reconnecting it, again nothing happens unless force restarting.
I've tried everything possible. Downgrading, upgrading, 4 files rom, pit file, rom from different zones, but still have the problem. I have no other issues regarding the USB port and charging, fast charging, connection to computer and any other stuff works fun but this OTG.
I wanted to know if anyone have any solutions for my problem or if anyone had the same issue or not.
it is also worth to mention that I have not rooted my phone due to warranty issues, and for that I haven't tested any kernels.
thanks for everyone
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
did you take the device correctly? download the strip and remove the sorage USB and reconnect
ultramag69 said:
That isn't right... As soon as I plug in my OTG USB key it detects it, no restart required.
Click to expand...
Click to collapse
So thanks god you don't have this terrible issue, but in your idea what's wrong with my phone? cause I connect the usb nothing happens
Sent from my SM-N950F using Tapatalk
would it make any difference to enable the usb debugging in developer options maybe
j_hansen said:
would it make any difference to enable the usb debugging in developer options maybe
Click to expand...
Click to collapse
allow file transfer .... possible
Nope, I have developer options enabled but debugging isn't on. never had to enable file transfer.
When I plug in the OTG device I see a usb icon in the notification panel. Swipe down and pick explore. Mind you it only opens in the stock file explorer, I did have another file explorer that picked it up too but can't think what it is and it has been lost myriad of other apps I test and play with...
Just be aware that it may take a few seconds to scan the device,depending on size, and then display the icon.
ultramag69 said:
Nope, I have developer options enabled but debugging isn't on. never had to enable file transfer.
When I plug in the OTG device I see a usb icon in the notification panel. Swipe down and pick explore. Mind you it only opens in the stock file explorer, I did have another file explorer that picked it up too but can't think what it is and it has been lost myriad of other apps I test and play with...
Just be aware that it may take a few seconds to scan the device,depending on size, and then display the icon.
Click to expand...
Click to collapse
I test another file manager with OTG
example solid manager or Es ....and not work for me
also I waiting 5minute but not work ...
Only force restart and after
boot phone I see icon otg in notification panel.
And when connecting OTG only charge device enabled for me
Sent from my SM-N950F using Tapatalk
i know it sounds weird but from past experience flaky USB drives are more trouble than they are worth, from first hand experience i know patriot, corsair and sandisk work well as OTG drive
also you neglected to mention the file system the USB was formatted with, i believe only FAT, FAT32 and exFAT are supported
SteelPicori said:
i know it sounds weird but from past experience flaky USB drives are more trouble than they are worth, from first hand experience i know patriot, corsair and sandisk work well as OTG drive
also you neglected to mention the file system the USB was formatted with, i believe only FAT, FAT32 and exFAT are supported
Click to expand...
Click to collapse
I use USB SanDisk (USB3 ) and format fat32
Sent from my SM-N950F using Tapatalk
also possible that the phone doesn't like your OTG adapter. I bought a usb 2.0 to type C adapter which doesn't even work on the phone - when I plug it in usually the moisture sensor error comes up saying water is in the device and I should let it dry. Unplug the OTG and the error goes away.
So... I bought a USB 3.0 A to type C OTG adapter and that one works fine with everything I've tested (usb flash drives, keyboard, usb ethernet adapter, etc)
I believe the USB-C to USB-A adapter that came with the phone is actually an OTG adapter (tested xbox360 controller and keyboard)
I also believe that the note8 can host usb flash drive native (no need for OTG cable) as i have a dual head USB-C and USB-A flash drive which is recognized once the USB-C end is plugged in
bassgenerator said:
did you take the device correctly? download the strip and remove the sorage USB and reconnect
Click to expand...
Click to collapse
I'm test with any OTG cable or.....not work
also reconnect and again connected but no answer
only with force restart
Sorry to dredge up a semi old thread, but has anyone found a fix for this?
I'm having almost the same issue, I finally decided to try out the OTG adapter from the box and nothing works, it isn't even recognized. Tried ps4 controller, mouse, keyboard 2 different thumb drives. Can't figure out what the deals is.
Other than that pc connection seems to work and charging works fine. TIA
I'm having a similar problem. A month ago, used both OTG adapters (original from Samsung and a generic one) it detects my memory sticks as a hard-disk and was able to manage my files. But since a couple of weeks ago it does not detect them anymore. Is like it did not supply charger to them anymore. I have tried the USB debugging menu and no difference at all. Even I got back to factory reset expecting to solve the issues but nothing happened. The port as such is working perfectly because I'm able to charge through it. On the other hand, Samsung DEX is not working as well. It just charges the phone but never boot-up.
I'm just waiting for Oreo and hopes this will sort the problems out.
Pechan_uvas said:
I'm having a similar problem. A month ago, used both OTG adapters (original from Samsung and a generic one) it detects my memory sticks as a hard-disk and was able to manage my files. But since a couple of weeks ago it does not detect them anymore. Is like it did not supply charger to them anymore. I have tried the USB debugging menu and no difference at all. Even I got back to factory reset expecting to solve the issues but nothing happened. The port as such is working perfectly because I'm able to charge through it. On the other hand, Samsung DEX is not working as well. It just charges the phone but never boot-up.
I'm just waiting for Oreo and hopes this will sort the problems out.
Click to expand...
Click to collapse
That sounds like a bodged port to me man
Is there any dust or dirt in there that you can see?
I really don't think Oreo's gonna fix that for you
Ripthulhu said:
That sounds like a bodged port to me man
Is there any dust or dirt in there that you can see?
I really don't think Oreo's gonna fix that for you
Click to expand...
Click to collapse
Seems to be a little bit dusty. Anyway, the other thing is that, when the Usb is detected it ask to choose between transfer files, images, midi device and so on, even if I choose "transfer files" mode it always get stuck as "charge connected device".
Hi i have the same problem... my note 8 can connected mith my notebook, but my otg with an usb stick cant recognize my note8. I test the same otg with usb stick on my friends phone example S8 and it detects promptly all.
I hope the fixing take not long time. I waiting for help. Greets
Well, adding one more case here, my native file manager doesn't recognize any memory connected via the original otg conector, but, using x-plore file manager, problem solved, as I use x-plore since my symbian days, I never gave this issue much importance, this problem was present also with my note 7
cleric05 said:
Sorry to dredge up a semi old thread, but has anyone found a fix for this?
I'm having almost the same issue, I finally decided to try out the OTG adapter from the box and nothing works, it isn't even recognized. Tried ps4 controller, mouse, keyboard 2 different thumb drives. Can't figure out what the deals is.
Other than that pc connection seems to work and charging works fine. TIA
Click to expand...
Click to collapse
This. I have exactly the same experience. I bought a couple of months ago a new Note 8, and finally decided to try the OTG adapter that came in the box. Nothing worked. I tried the adapter with a friends phone and it worked like magic (USB drives, mice, keyboards, controllers, etc.).
Would really apreaciate if anyone can provide help on this issue... Cheers!

Help, Mi A2 USB problem!

Hi, phone works OK, it also charges BUT doesn't connect to any PC (windows detects device with description error?), usb OTG not working either, only headphones using type c adapter. Please help, I'm using stock pie with February update, unrooted, blocked bootloader and with usb debugging enabled.
@egantz09
Disable USB Debugging.
Install this driver (and please follow the instructions):
https://c.mi.com/thread-1625831-1-1.html
Test.
egantz09 said:
Hi, phone works OK, it also charges BUT doesn't connect to any PC (windows detects device with description error?), usb OTG not working either, only headphones using type c adapter. Please help, I'm using stock pie with February update, unrooted, blocked bootloader and with usb debugging enabled.
Click to expand...
Click to collapse
Probably water damaged sub-board. Happened with me too, got my phone today.
A_H_E Thanks
A_H_E said:
@egantz09
Disable USB Debugging.
Install this driver (and please follow the instructions):
https://c.mi.com/thread-1625831-1-1.html
Test.
Click to expand...
Click to collapse
Hi, Thanks for the guide, but I can't pass from step 6 in which I need to install the Mi Drivers but no PC recognizes de phone, not even in fastboot mode, see screenshot. Any other ideas? I can still charge it and listen audio trough the usb port. Thanks in advance.
Edit: I've hard reset the phone and the problem still persist.
egantz09 said:
Hi, Thanks for the guide, but I can't pass from step 6 in which I need to install the Mi Drivers but no PC recognizes de phone, not even in fastboot mode, see screenshot. Any other ideas? I can still charge it and listen audio trough the usb port. Thanks in advance.
Edit: I've hard reset the phone and the problem still persist.
Click to expand...
Click to collapse
Thanks for the update.
Go into Step 7, with the device connected, and install the drivers manually.
So, in this scenario, you'll right click on the device and browse to the location where you downloaded the drivers.
I need to know what happens if you try and install them manually.
A_H_E said:
Thanks for the update.
Go into Step 7, with the device connected, and install the drivers manually.
So, in this scenario, you'll right click on the device and browse to the location where you downloaded the drivers.
I need to know what happens if you try and install them manually.
Click to expand...
Click to collapse
Hi, I can't actually do step 7 because it doesn't recognizes the phone as an Android device like in the guide, but as an:
Unknown USB Device (Error Device Descriptor Request Failed) see attached screenshot.
Even when I select this Unknown USB Device and tried to update de driver manually, the installation fails. (see attached screenshot) .
I've changed cables and tried on different ports of different PCs. Same result. Also by entering Developer Options and accessing the USB settings won't work, there are all greyed out.
@egantz09
Thank you for your efforts and feedback.
Based on the details, I would strongly suggest you initiate a return. You've taken all the appropriate steps, and then some, to address the problem but it's obvious the issue exists with the device hardware.
I am happy to provide further instructions but what concerns me is the fact you've tried multiple PCs and multiple cables.
A_H_E said:
@egantz09
Thank you for your efforts and feedback.
Based on the details, I would strongly suggest you initiate a return. You've taken all the appropriate steps, and then some, to address the problem but it's obvious the issue exists with the device hardware.
I am happy to provide further instructions but what concerns me is the fact you've tried multiple PCs and multiple cables.
Click to expand...
Click to collapse
Hi, I can't return it so I already ordered online a replacement Port Board from aliexpress.com, so I'll check back in 4-6 weeks, thank you very much for your help.
did replacing the port solve your issue? I have the same problem
---------- Post added at 07:21 PM ---------- Previous post was at 07:21 PM ----------
cant even force edl mode
Sadly I'm still waiting for the replacement to arrive...I'm in Cuba. But other people with similar problems have solved them by replacing the USB port. Good luck.
egantz09 said:
Sadly I'm still waiting for the replacement to arrive...I'm in Cuba. But other people with similar problems have solved them by replacing the USB port. Good luck.
Click to expand...
Click to collapse
i received new usb port and still have problem
sparkplug619 said:
i received new usb port and still have problem
Click to expand...
Click to collapse
if you followed all of the instructions and steps in this post and the problem continues, then you should return your phone.
I already changed my USB port. My warranty is void
If your phone was in warranty you should have returned it, changing the USB port was your final option. Now you should take it to a service center. Good luck,
sparkplug619 said:
I already changed my USB port. My warranty is void
Click to expand...
Click to collapse
I replaced my usb port today, still no luck, I tried 3 different ports (I bought 3), It charges with all of them but no USB connection to PC or OTG. I'm thinking its the mainboard. Could it possibly be the FLEX connector?
This is a big problem with 2 MI A2 for me
Since that problem i hate Xiaomi and never Xiaomi product to bey
I have the same problem ... My phone only charging when i connected via USB to the PC... I change USB board and i still have the same problem... I can't choose any options.. only charging.. any help how to solve this problem ? Thanks
Georgeek1 said:
I have the same problem ... My phone only charging when i connected via USB to the PC... I change USB board and i still have the same problem... I can't choose any options.. only charging.. any help how to solve this problem ? Thanks
Click to expand...
Click to collapse
I waited 3 months for my USB port replacement and it did the same thing, now I'm waiting for the flex connector, if that doesn't work either, then its a problem with the motherboard.
I ended up replacing the entire phone and a few months later this phone now has the same issue.. this is horrible. Especially with no USA support from Xiaomi. Its a "deal with it" situation.
But i believe the use of crappy chargers, debris getting into port, maybe Qualcomm quick charge modules design flaw could be sending unsafe currents or lacking proper temp regulation when charging,, is damaging something on the main board. I checked every possible software related possibility and tried every fix with no luck.
What i did notice when it happened this time, chargers were not staying connected, they would pop out due to debris in the charging port, also i noticed my phone got pretty hot using a Qualcomm QC enabled charger one night. Nothing else was suspected of generating heat, all apps closed, screen had been off.
I everyone... Where i can buy an usb port?? My A2 is not charging, trying at least 4 different cables and chargers,
Tks

USB connection Issue to PC

Hi, My phone is showing these symptoms :
If I connect it using USB cable, no USB icon shows up in status bar, PC does not recognize any device connected to it(with or without driver you should be able to see a USB device connected to it) also it wont even charge!
Phone charges fine with charger
If I turn off phone and connect it to PC it will start to charge
Holding volume up and connecting to charger will result in LED turn blue and a black screen but still no USB device shows up in PC for fastboot
If I go into USB Preferences and connect the USB to PC everything is grayed out except enabling charge connected device
what I've tried :
Use different cable
Use different PC
Use different OS(windows10/Linux)
Reboot phone
Removing SD card and SIM card
Factory reset phone
Clean USB port
My phone is using latest Android pie Build 52.0.A.8.14, developer mode and USB debugging is also enabled.
I would appreciate if you let me know how to resolve this If you think it's not a hardware issue
Is there any way to install TWRP without having USB connection to the phone ?
obituary2u said:
Hi, My phone is showing these symptoms :
If I connect it using USB cable, no USB icon shows up in status bar, PC does not recognize any device connected to it(with or without driver you should be able to see a USB device connected to it) also it wont even charge!
Phone charges fine with charger
If I turn off phone and connect it to PC it will start to charge
Holding volume up and connecting to charger will result in LED turn blue and a black screen but still no USB device shows up in PC for fastboot
If I go into USB Preferences and connect the USB to PC everything is grayed out except enabling charge connected device
what I've tried :
Use different cable
Use different PC
Use different OS(windows10/Linux)
Reboot phone
Removing SD card and SIM card
Factory reset phone
Clean USB port
My phone is using latest Android pie Build 52.0.A.8.14, developer mode and USB debugging is also enabled.
I would appreciate if you let me know how to resolve this If you think it's not a hardware issue
Is there any way to install TWRP without having USB connection to the phone ?
Click to expand...
Click to collapse
Mtp and ADB are working?
MartinX3 said:
Mtp and ADB are working?
Click to expand...
Click to collapse
No all are grayed out in phone and not working, also in linux lsusb shows no new connection even the phone does not get charged with PC unless I turn off the phone
obituary2u said:
No all are grayed out in phone and not working, also in linux lsusb shows no new connection even the phone does not get charged with PC unless I turn off the phone
Click to expand...
Click to collapse
Sounds like Dataport in USB Slot is broken
Hardware damage
MartinX3 said:
Mtp and ADB are working?
Click to expand...
Click to collapse
MartinX3 said:
Sounds like Dataport in USB Slot is broken
Hardware damage
Click to expand...
Click to collapse
Thank you for your reply, and I assume there is no way to install recovery without data connection.
obituary2u said:
Thank you for your reply, and I assume there is no way to install recovery without data connection.
Click to expand...
Click to collapse
Warranty ASAP
Our don't you want to use this device for years?
MartinX3 said:
Warranty ASAP
Our don't you want to use this device for years?
Click to expand...
Click to collapse
Not really I'm going to use it for 2 month and then keep it as my backup phone, also I don't think it has warranty I bought it second hand in Canada
obituary2u said:
Not really I'm going to use it for 2 month and then keep it as my backup phone
Click to expand...
Click to collapse
If you don't rely on unlocking, usb data transfer, etc it is fine
I know this is a old thread, but
I have a similar issue, I need this phone for debugging purpose, and I "fixed" it by turn the usb-c around........
Just like the old usb.
I don't know why. I already tried multiple cables, all have "one side connection", it seems it's phone's hardware issue. But I'm not sure.
That's not the case for me, looks like some people are telling this has happened for them after updating to 52.0.A.8.50
cdytoby said:
I know this is a old thread, but
I have a similar issue, I need this phone for debugging purpose, and I "fixed" it by turn the usb-c around........
Just like the old usb.
I don't know why. I already tried multiple cables, all have "one side connection", it seems it's phone's hardware issue. But I'm not sure.
Click to expand...
Click to collapse
I'm also having the same problem with the same phone (android 10 build 52.1.A.2.1).
This problem started yesterday and somehow my SD card is not recognized anymore, it's asking to reformat it.
Rotating the original usb cable does help!
Only it doesn't want to connect to finder on my Mac, I have yet to try a windows pc.

Categories

Resources