ok so my last galaxy s lasted a matter of hours.....so that nothing goes wrong again....can someone give me the heads up with what to do?
Ive followed guides etc but still managed to kill the last one......had one ages ago and was great
all im looking to do is get onto cm10
this is what i currently have and its all stock
GT i9000
firmware 2.2
baseband version i9000xxjpp
kernel version [email protected]#1
build number
froyo.xxjpo
thanks in advance:silly:
ok well no massive reply.....but looking in my old posts i found a reply from slaphead and his eze flash set..............thanks matey
Related
Just bought a samsung galaxy s gt i9000m phone and so far I have done the 1 click root on it and installed rom manager , busybox and titanium backup. I have flashed the Clockworkmod recovery to the phone and looking to update my firmware to 2.2 if I'm able to.
Right now I am running firmware 2.1-update1 from bell and kernel version 2.6.29 darae.ahn Sep-20 #2 . Build Eclair UGJH2
I can get into recovery and download modes without a problem , would anyone mind letting me know what my options are for froyo 2.2 with this bell phone? Thanks alot in advance , looking forward to any replies and help with my questions.
stevenca said:
Just bought a samsung galaxy s gt i9000m phone and so far I have done the 1 click root on it and installed rom manager , busybox and titanium backup. I have flashed the Clockworkmod recovery to the phone and looking to update my firmware to 2.2 if I'm able to.
Right now I am running firmware 2.1-update1 from bell and kernel version 2.6.29 darae.ahn Sep-20 #2 . Build Eclair UGJH2
I can get into recovery and download modes without a problem , would anyone mind letting me know what my options are for froyo 2.2 with this bell phone? Thanks alot in advance , looking forward to any replies and help with my questions.
Click to expand...
Click to collapse
Try the Doc/Kalpik rom. I'm running version 6. Simple to install, with no issues (for me anyways)
Xwjpa v7.6.2
Can I put this on my bell galaxy s ?
Choices are ..:: Current Releases ::..
XWJPA: V7.6.2
XXJPO: V7.6.2
I can't tell which would be better for my bell canada galaxy s gt-i9000m , any help appreciated !
I'm also running version 6 and it is awesome.
None of these roms were designed for the Bell phone so pick whichever one you want. There is a link on Docs first page that may help you decide which version to install. I have used a few of Docs roms and they all worked great on my m.
Sent from a Bell I9000m running Froyo.
Thx guys , did alot of reading and in the end I installed Docs XXJPO 7.6.2 on my bell samsung galaxy s gt-i9000m and its working great !! Only problem I have is it will not accept the lagfix that was reccommended in the read me , hoping someone can answer why to that , otherwise , great to be 2.2 !
Honestly, try it for a while without lagfix. I haven't used one and I notice no lag at all.
I already applied it , to be honest I wasn't seeing the lag but I wanted to get it over with rather than 3 days from now be on here asking about it. I am going to go thru the readme now to see some of the other goodies that were there to choose from and hopefully be done messing on the phone for a while ! I bricked my first galaxy s this week so being cautious with everything now !!!
Guys.....i live in the middle east..precisely UAE....i bought my SGS about 8 months ago in october.....i had 2.1....in december i upgraded it to 2.2 via kies........the market dint work for me at that time, but i have a few friends who bought the i9003 and the market works....apparently i have to upgrade the firmware to 2.2.1 for the market to work......now i jz wanna know which is the best rom out there for my region and if any1 wud be kind enough to direct me on how the rooting and flashing can be done, i will really appreciate it......i tried searching here but i get lost in the forums....too many ppl saying different things, which i tried once and it dint work......so if any1 can help me i will really appreciate it!
Baseband Version: I9000JXJPE
Kernal Version: 2.6.32.9 [email protected] #91
Build Number: FROYO.JPJPG
From what I see the only official release after your I9000JPJPG 2.2 is this -I9000JPJPM 2.2.1 http://hotfile.com/dl/113881486/83d6b01/I9000JPJPM.rar.html
Hi all,
I am wondering if someone can guide me to the correct direction.
This is my phone (samsung Galaxy I9000)
Model GT-I9000
Firmware: 2.1-Update 1
Base Version: I9000 DTJG3
Kernel 2.6.29 [email protected]#2
Build Number: ECLAIR. DTJG4
It is unlocked - orginally from Optus.
this phone feels very slow and not very responsive at the moment.
I am thinking of upgrading the firmware hoping that it will improve the persformance
Can someone please tell me which firmware will be best for me? I'm not going to root the phone and I am just after most effecient firmware (good wifi, GPS and signal)
I am not sure which one is most stable for my phone.
Thank you
you could flash a stock gingerbread rom.the ones with bootloaders.jvh is pretty stable.2.3.4 ones will have phone fc bug..you'll hv to root ur phone to get rid of that bug..stock roms u can dwnld from ramads thread..for gps/wifi/signal u will have to flash the appropriate modem.there was a thread comparing modems somewhere here on the forum.try searching it.if u really want near zero lags it would be best to do ext4 lagfix..but again rooting will be reqd.gb roms are fast without these but lagfix still brings noticeable change.
Thank you for the reply.
It seems that I am gonna need to do root on it.
If that is the case, It will be much appreciated if I can be pointed to the correct link (tutorial - step by step) to get this process.
After reading some of the psosts I get really confused with all the type of firmware and kernel etc...
any suggestions and links I can follow will be much a great help much appreciated
Thank you again
The below links helped me out.
http://www.theandroidsoul.com/xxjvp-android-2-3-4-firmware-galaxy-s-install-and-download/
http://www.theandroidsoul.com/root-xxjvp-firmware/
Read the tutorials carefully, then read them again and again until you are sure and confident. do not use if you dont feel confident.
Make sure you have the 3 button combo (recovery and download).
You should be able to update to gingerbread via Kies JVN 2.3.3 -optus
Drift spunk said:
You should be able to update to gingerbread via Kies JVN 2.3.3 -optus
Click to expand...
Click to collapse
Thank you - updating now
You got proper internet connection?If yes then kies will diffinetly show either This is the latest firmware or there is an update available.
Sent from my GT-I9000 using XDA App
ardabelati said:
Thank you - updating now
Click to expand...
Click to collapse
Nice I'm on 2.3.4 jvr with jvn csc and jv1 modem and its the best combo and I have flashed every rom, samsung and miui
Sent from my GT-I9000 using XDA App
Hello, you can try JPY on 2.2.1, it's a stable firmware without the bugs of the gingerbread, if you doesn't want to root your phone.
Thanks for all the replies guys,
I just upgraded to GingerBread 2.3.3 XWjVN.
My next question is:
If I want to get rid of all those Optus rubish - Can you please tell me which firmware do I need to install?
There are so many types and I really get confused which one is going to work for me.
I have seen my friend's SI9000 very fast and snapy - is the firmware upgrade the way to do it?
Thanks again guys
Flash any custom roms from here CUSTOM ROMS
Hi all,
Tesco in the UK are selling the 7 inch Galaxy Tab for £149, down from £399, so had to buy one.
I'd like to root it but not sure if it is one of the rootable Tabs.
This is the information from About Device:
Model number: GT-P1000
Firmware version: 2.3.3
Baseband version: P1000XXJPZ
Kernel version: 2.6.35.7 [email protected] #2
Build number: GINGERBREAD.XWJP9
In the Mobile network type it says HSDPA
Is this Tab rootable, and if so, which method should I use, and which files do I need to download?
Many thanks
Gaz
Hi Gaz.
I managed to get one last night from tesco too.
Just rooted it using the method on http://forum.xda-developers.com/showthread.php?t=812367
Very easy.
Now I'm on the hunt for a decent custom rom, but need to install recovery first :s lol
teffers said:
Hi Gaz.
I managed to get one last night from tesco too.
Just rooted it using the method on http://forum.xda-developers.com/showthread.php?t=812367
Very easy.
Now I'm on the hunt for a decent custom rom, but need to install recovery first :s lol
Click to expand...
Click to collapse
Thanks for the reply. Sounds like you rooted it before updating the ROM to Gingerbread in kies. You would have been running the original Froyo ROM, which I believe the method above works for. I don't think it works with Gingerbread.
I don't want to install a custom ROM, just want more control for backing up, removing bloatware, etc.
Thanks
Gaz
You're right (sorry I had missed you had Gingerbread right out of the box). I rooted the stock Froyo version, then updated to Gingerbread via the Samsung Kies updater.
Then I re-reooted using the following:
http://www.review-ninja.com/2011/08/root-samsung-galaxy-tab-7-gingerbread.html
Very simple and works for GB ;-)
Thanks for the link. Nice to know it works. If it works on yours it should work on mine; I just wasn't sure which of Chainfire's kernels to download as he lists several here on XDA and none seemed to match my Tab. I'll give it a go.
Cheers
Gaz
That worked a treat.
Thanks for your help. Always safer to check before doing this as it would be embarrassing if I'd bricked a 1 day old Tab!
Great value at £149. Thank you Tesco!
Glad you're sorted
Yeh kinda impossible to take it back for an exchange if you brick it, seems like the stock is well and truly gone now.
ok im new and im sorry about that
i traded my iphone for a note that had ics on it i wanted to learn android with no roots hacks tweeks and so on so i tried to flash back it bricked and i un bricked it so now in about phone it says:
Android version
4.0.3 (i thought that was isc)
Baseband i717uclc5
Kernel version
3.0.8-perf-i717uclc5-cl281649
[email protected]#1
Build number
IML74k.144
the phone is running gingerbread i have seen both versions and it is not ics
anything will help thanks in advance
You are in the wrong forum, pal. You have an AT&T Note, so look for answers here:
http://forum.xda-developers.com/forumdisplay.php?f=1493