i was using clockwork mod to install the new kernel, i backed up my phone and enter into recovery mode, but after reboot i coudlnt get into my phone, i stucked at the main screen galaxy S, may b i installed a kernel that is not compatible, PLS help anyone >.<
can you access download mode?
while the phone is off press home, then volume + then power.
if so you can flash your phone with odin, check the forum on how to do this
ya i can go into recovery mode and download mode, i tried to restore the backup using clockworkmod , it seemed working after that i reboot i return to the clockworkmod recovery screen, den i reboot again and i did tat alot of timees, still stuck, so my only solution is to flash using Odin? that sounds very new to me, LOL, i m noob..
Thx for replying and trying to solve my problem =)
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro
Here is my situation..
- My Note soft-bricked, keep looping the samsung logo.
- Power Button broken, tried solder new button, but not working, seems the power circuit got faulty.
- I can enter download mode
- Tried flash different rom with/without pit through odin, still same
- adb can't find device while bootloop
I think the bootloop can be solved by wiping the cache, but the problem is I can't enter recovery mode.
Please help..thanks.
teohjk said:
Here is my situation..
- My Note soft-bricked, keep looping the samsung logo.
- Power Button broken, tried solder new button, but not working, seems the power circuit got faulty.
- I can enter download mode
- Tried flash different rom with/without pit through odin, still same
- adb can't find device while bootloop
I think the bootloop can be solved by wiping the cache, but the problem is I can't enter recovery mode.
Please help..thanks.
Click to expand...
Click to collapse
I manage to solve my problem after trying several days.
Here is my solution, in case there is any people facing the same problem. Hope it helps
- Download KJ1 ROM (d-h.st/HJM) and flash through ODIN.
- ADB is able to access even though in bootloop condition
- it come with CMW 5 that able to select using HOME button in stead of POWER button
- After flashing the ROM through ODIN, access ADB while Samsung logo shown up.
- Command:
adb devices
adb reboot recovery
- Then you will able to access to CMW 5 Recovery, you can do full wipe and install a working ROM there..
- Done..
Hi.
My note bootloop after trying new kernel. Forgot the kernel bcoz it happen 3 months ago.
The issues:
1. Home button broken. So i cant go to recovery mode.
2. Try using adb reboot to recovery but device is not detected. My phone keep rebooting.
3. The phone can go to download mode only. (using usb jig)
4. Try flash stock rom, others kernel but the problem still.
im trying search for this problem but the solution only i must boot to recovery.
Sorry for my bad english.
Thanks.
mikagami29 said:
Hi.
My note bootloop after trying new kernel. Forgot the kernel bcoz it happen 3 months ago.
The issues:
1. Home button broken. So i cant go to recovery mode.
2. Try using adb reboot to recovery but device is not detected. My phone keep rebooting.
3. The phone can go to download mode only. (using usb jig)
4. Try flash stock rom, others kernel but the problem still.
im trying search for this problem but the solution only i must boot to recovery.
Sorry for my bad english.
Thanks.
Click to expand...
Click to collapse
after flashing stock rom using odin when device restarts remove usb jig and press home and volume plus to go to recovery mode.. then clear cache and dalvik cache .. tis should solve ur problem. tricky part is after completion of odin flash u have to quickly go to recovery using volume and home button once the flash is complete so that when device restarts u can go to recovery direct.
Hello,
I tried to flash twrp on a stock i9305 through Odin.
It initially seemed unsuccessful (rebooting to stock recovery) until i rooted the phone and flashed twrp again.
From twrp i then tried to flash RR rom but it refused (don't remember detailed message). I decided to give up and reboot.
The phone stays stuck on samsung logo.
I removed the battery. Restarted with 'home+volDown+power'
All i can get is the screen telling me to press VolUP to flash a ROM. My issue is that the VolUP button does not work.
I tried to remove it and press with a pin to no avail.
I can't use adb (not recognized)
Odin sees the phone but can not flash anything as the phone is not in DL mode...
Any ideas ?
Thanks a lot!
xlcazale said:
Hello,
I tried to flash twrp on a stock i9305 through Odin.
It initially seemed unsuccessful (rebooting to stock recovery) until i rooted the phone and flashed twrp again.
From twrp i then tried to flash RR rom but it refused (don't remember detailed message). I decided to give up and reboot.
The phone stays stuck on samsung logo.
I removed the battery. Restarted with 'home+volDown+power'
All i can get is the screen telling me to press VolUP to flash a ROM. My issue is that the VolUP button does not work.
I tried to remove it and press with a pin to no avail.
I can't use adb (not recognized)
Odin sees the phone but can not flash anything as the phone is not in DL mode...
Any ideas ?
Thanks a lot!
Click to expand...
Click to collapse
I suggest to get a USB jig. I've always one at home. Bought mine on eBay for about 2€. Just search the web.
Thanks. Just looked it up. I'll give it a shot :good: