Related
Does your metal bumper case have a slight raise from the side to prevent scratches to both front and back especially the camera lens?
Do you think it would fit with a slim case?
Please post a link where you bought it.
Thank you very much and pardon my engrish!
Sent from my GT-P7510 using xda premium
exconvictriddick said:
Does your metal bumper case have a slight raise from the side to prevent scratches to both front and back especially the camera lens?
Do you think it would fit with a slim case?
Please post a link where you bought it.
Thank you very much and pardon my engrish!
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
I have this one
http://www.ebay.com/itm/251175458354?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Protects the front good...the back...not so much. Not sure on the slim case question. Love mine though
exconvictriddick said:
Does your metal bumper case have a slight raise from the side to prevent scratches to both front and back especially the camera lens?
Do you think it would fit with a slim case?
Please post a link where you bought it.
Thank you very much and pardon my engrish!
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
If you worry about the back, maybe you can just buy a spare battery cover from eBay. I got 2 and they are about 8 dollars each and they are both with nfc
Sent from my GT-N7100 using xda premium
Twistedchild420 said:
I have this one
http://www.ebay.com/itm/251175458354?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Protects the front good...the back...not so much. Not sure on the slim case question. Love mine though
Click to expand...
Click to collapse
hi twisted.
do u see your wifi and cellular signals going weak with the bumper installed?
thanks.
Have the same one. And internet was not effected. Played YouTube in HQ while browsing Facebook and instagram AT DA SAME DAMN TIME while at work (no wifi) 4g all day baby I love it
Sent from my SGH-T889 using xda premium
Insane Devil said:
hi twisted.
do u see your wifi and cellular signals going weak with the bumper installed?
thanks.
Click to expand...
Click to collapse
I bought one a couple of weeks ago. I think the aluminium case gives good screen protection, but although it is reasonably low profile the few millimetres each side do seem to make the Note 2 feel much bigger. I personally don't think it's the most elegant case, they look OK from the front, but the back doesn't seem to follow the flow of the stock battery case too well.
Don't get me wrong, the phone fits in perfectly without any movement but not my cup of tea. I lose one bar on the phone signal when the case is on, NFC is fine.
Possibly a like or hate accessory!
Thanks for all the replies. That was my main concern. I wanted a metal bumper case that has a slight rise to protect the camera lens. I'm going to buy a ballistic 3 layer protection case since GN2 can be easily damage even at waist height drop.
Why ballistic? Because its relatively cheap, unlike otterbox and offers awesome drop protection. Had one for E4GT and money worth spending.
Thanks again.
Sent from my SPH-L900 using xda premium
http://www.amazon.com/gp/product/B0...pf_rd_t=101&pf_rd_p=1389517282&pf_rd_i=507846
i use that one. slight raises on the front and back to protect the camera. It adds a little weight to the phone but its not unbearable. I actually like it. I also got the armror suit military shield screen and back protector. Screen protector was not compatible with the case, cause when I removed the phone from the case, the sliding portion of the front peeled the screen protector off. and the added thickness of the armorsuit full body protector makes it very snug in the case. probably the reason why it the screen protector peeled off as I was trying to remove it.
http://www.ebay.com/itm/New-Metal-A...698003?pt=PDA_Accessories&hash=item3f1efae213
You think i should spend a little more or does this look good?
I plan on getting that bumper and getting this battery cover:
http://www.ebay.com/itm/Luxury-Alum...3?pt=PDA_Accessories&var=&hash=item416e17add9
rubberwheels said:
http://www.ebay.com/itm/New-Metal-A...698003?pt=PDA_Accessories&hash=item3f1efae213
You think i should spend a little more or does this look good?
I plan on getting that bumper and getting this battery cover:
http://www.ebay.com/itm/Luxury-Alum...3?pt=PDA_Accessories&var=&hash=item416e17add9
Click to expand...
Click to collapse
The battery door has no NFC
Paradaz said:
I lose one bar on the phone signal when the case is on
Click to expand...
Click to collapse
Could this be the back or the bumper causing you to loose a bar?
rubberwheels said:
http://www.ebay.com/itm/New-Metal-A...698003?pt=PDA_Accessories&hash=item3f1efae213
You think i should spend a little more or does this look good?
I plan on getting that bumper
Click to expand...
Click to collapse
I purchased this exact bumper and think it looks great. Does add a little thickness to the sides but feels protected.
JosephL said:
Could this be the back or the bumper causing you to loose a bar?
Click to expand...
Click to collapse
The bumper in my experience is causing a loss of one bar. I'm in good coverage areas or around WIFI constantly so no big deal for me.
Sent from my NOTEworthy smartphone
Here are the ones I was looking at. I think I like the polished chrome one the best.
http://www.casefanatic.com/samsung-...-galaxy-note-2-n7100-metal-bumper-frame-case/
these bumper cases, esp the metal ones.. are they easy to remove/replace? As a frequent traveler, I switch batteries every night to make sure that i'll always have a fully charged spare.. I'd hate to use the bumper case where you need a small screw to open (i think I saw a bumper case like that once).
mobilebuddha said:
these bumper cases, esp the metal ones.. are they easy to remove/replace? As a frequent traveler, I switch batteries every night to make sure that i'll always have a fully charged spare.. I'd hate to use the bumper case where you need a small screw to open (i think I saw a bumper case like that once).
Click to expand...
Click to collapse
I ordered one off ebay that doesnt require screws. The front plate slides on/off and very easy to take the phone out of the case if needed.
Sent from my NOTEworthy smartphone
K.0.0.L. said:
The battery door has no NFC
Click to expand...
Click to collapse
I believe someone also tried to put on the NFC on the metal door and it still did not work FYI.
Other then that, I love my metal door
aeo 37 said:
I believe someone also tried to put on the NFC on the metal door and it still did not work FYI.
Other then that, I love my metal door
Click to expand...
Click to collapse
Where'd you buy yours? I'm looking for a coffee colored metal door.
If theres any UK users in this thread that wants a black aluminium bumper for free then let me know and PM me your address. I bought one to try along with a selection of cases but am unlikely to use it. Its a great fit for the phone and is a screwless design.......the front plate slides up and snaps into place. I bought it from the link below.
http://www.ebay.co.uk/itm/271098171...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Sent from my GT-N7100 using xda premium
I think I would be worried about the sliding piece scratching the glass. Is there any problem with this? Also, what kind of padding is on the inside rim?
jessecoleman said:
I think I would be worried about the sliding piece scratching the glass. Is there any problem with this? Also, what kind of padding is on the inside rim?
Click to expand...
Click to collapse
Got mine yesterday, I haven't noticed any scratching yet, so I'm pretty sure it's fine.
Sent from my GT-N7100 using xda premium
The Tough cases has always been the best I've owned. They have changed the design up for our Note 2 (just like trident, I feel these companies are debuting the latest and greatest with our phone). So I've reviewed it below.
Made a separate review thread here, easier to post a bunch of pics.
http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
Thank you for the info.
My 2 cents: can't see how this is "tough". I used to work in Retail and we carried these Case mate's for other phones, and i can't see how it is better protection than an Otterbox (though sadly they make ugly cases for all the phones I own), or even Ballistic. They seem kinda of .. regular.
40 bucks seems kinda high for a case like that...I know eventually they will come to amazon for a lot cheaper..
For my S2 I had every case there was and it was always the best for being rugged, slim, and awesome grip. The name may make it sound like a contender with the otterbox defender, but its certainly more in the commuter class if thats what your looking for. The design looks different than previous versions, just hope it works out in a good way.
Sent from my SPH-L900 using xda premium
I will say one thing about case-mate, they seem to have good build quality from past products I've tried. They have less pronounced mold lines etc.
Otterbox's are riddled with ugly mold lines everywhere or at least their recent products.
Oops didnt see this thread when i created mine hehe ...
Pre-order is available @ shop andrioid Canada. Another promising looking case. Reminds me of a mix of the Body Glove and Diztronic Case.
Canadian Link: http://ca.shopandroid.com/case-mate-...0/4AA13535.htm
Case mate for Note 1: http://www.youtube.com/watch?v=b1FP3TdTO0s
Built to withstand sudden drops and accidental falls, the Tough Case is the epitome of protection. A snug, form fitting silicone wrap provides shock resistance, while the hard shell protects against impact. The lightweight, slim case adds support and shields your Samsung Galaxy Note 2, keeping your emotional state intact, one drop at a time.
Features:
- Dual layers of silicone and ABS hard shell plastic combine for secure protection
- Form fit feature covers back and corners
- Impact resistant, flexible plastic shell
- Access to all ports and functions
Pompsdai said:
Oops didnt see this thread when i created mine hehe ...
Pre-order is available @ shop andrioid Canada. Another promising looking case. Reminds me of a mix of the Body Glove and Diztronic Case.
Canadian Link: http://ca.shopandroid.com/case-mate-...0/4AA13535.htm
Case mate for Note 1: http://www.youtube.com/watch?v=b1FP3TdTO0s
Built to withstand sudden drops and accidental falls, the Tough Case is the epitome of protection. A snug, form fitting silicone wrap provides shock resistance, while the hard shell protects against impact. The lightweight, slim case adds support and shields your Samsung Galaxy Note 2, keeping your emotional state intact, one drop at a time.
Features:
- Dual layers of silicone and ABS hard shell plastic combine for secure protection
- Form fit feature covers back and corners
- Impact resistant, flexible plastic shell
- Access to all ports and functions
Click to expand...
Click to collapse
It also says "Available!" I'd love this case, but 40 bucks for it without any reviews? I'll wait a week and let Youtube and the forum populate a little ^.^ hehe. But I LOVE the tough case! I had it for another phone and it was great. hehe.
zkyevolved said:
It also says "Available!" I'd love this case, but 40 bucks for it without any reviews? I'll wait a week and let Youtube and the forum populate a little ^.^ hehe. But I LOVE the tough case! I had it for another phone and it was great. hehe.
Click to expand...
Click to collapse
Yup, Available is always good. My tracking just popped up and I should have it in a few, they had quick turn around on the order. Wish they had a red and black option, but they only just put em out
thehunter88 said:
Thank you for the info.
My 2 cents: can't see how this is "tough". I used to work in Retail and we carried these Case mate's for other phones, and i can't see how it is better protection than an Otterbox (though sadly they make ugly cases for all the phones I own), or even Ballistic. They seem kinda of .. regular.
Click to expand...
Click to collapse
Lol I agree with you can't see how this case is tough lets see someone do a drop test like the ones for otterbox for are phone and then will see just how tough the case is ,,
Re: Now Available - Casemate Tough Case
I have one purchased from att today love it only gripe a lot of lift where the camera sits.
Sent from my SAMSUNG-SGH-I317 using xda premium
Re: Now Available - Casemate Tough Case
I've dropped my S2 multiple times from high, even on the road once getting out from the car. Never had a scratch on my device. IMHO, the greatest feature of the tough case is the grippiness of the textured back. None if the hybrid case out there have this grippy texture. Even the ballistic or otterbox have a somewhat smooth back.
Been waiting for this case for a long time!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Re: Now Available - Casemate Tough Case
androidaddict23 said:
I have one purchased from att today love it only gripe a lot of lift where the camera sits.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Sent from my SGH-T889V using Tapatalk 2
Can u take pics and write a mini review on it.
Sent from my SGH-T889V using Tapatalk 2
Re: Now Available - Casemate Tough Case
Just got my tough case. I am nothing but impressed. This thing is so light and thin! Barely feels like there is a case on the phone yet has great protection, all the corners are well protected, none of the edges pull back like EVERY other case ive had. Will post pics and review in the OP tonight when I can.
Sent from my SPH-L900 using xda premium
Re: Now Available - Casemate Tough Case
sleshepic said:
Just got my tough case. I am nothing but impressed. This thing is so light and thin! Barely feels like there is a case on the phone yet has great protection, all the corners are well protected, none of the edges pull back like EVERY other case ive had. Will post pics and review in the OP tonight when I can.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Can't wait...
Sent from my SGH-T889 using Tapatalk 2
Got tired of waiting for a UAG case order so I've decided to order a tough case today.
Took the blue one and It looks great.
You can buy it for 20$ instead of 40$, all you need to do is to put in your order the coupon code "friends50" and It takes off 50% of your case order. Enjoy!!
I can't wait for it to arrive to my country.
Can someone tell me the size of the hole in the case around the headphone port? I have a set of Shure In-ear monitors I use and they have a fat body around the plug, about 3/8".
I have modified the Samsung case to make it work, but looks ugly. Kinda matches the side I cut to get the flip cover to work with it.
Looking for a new case and this one just came on my radar.
Re: Now Available - Casemate Tough Case
firewater88 said:
Can someone tell me the size of the hole in the case around the headphone port? I have a set of Shure In-ear monitors I use and they have a fat body around the plug, about 3/8".
I have modified the Samsung case to make it work, but looks ugly. Kinda matches the side I cut to get the flip cover to work with it.
Looking for a new case and this one just came on my radar.
Click to expand...
Click to collapse
The cutout actually looks like its exactly 3/8 of an inch(just used a measuring tape). is the plug just shy of 3/8?
Sent from my SPH-L900 using xda premium
Re: Now Available - Casemate Tough Case
How is the grip on it?
Sent from my SGH-T889 using Tapatalk 2
sleshepic said:
The cutout actually looks like its exactly 3/8 of an inch(just used a measuring tape). is the plug just shy of 3/8?
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
I put calipers on it and it hit 3/8" without squeezing it. I may have to shave a bit off the plug, there is a lot of rubber surrounding the plug.
Thanks for measuring...
Re: Now Available - Casemate Tough Case
heyodee said:
How is the grip on it?
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
...awesome. ever had a tough case before? Has the little diamond raised bumps all over so its great.
Sent from my SPH-L900 using xda premium
Does anyone have this one? I had a bumper on an iPhone previously and liked how it gave it some grab when I set it down on a table. But also gives some protection while keeping it closer to naked.
http://www.amazon.com/gp/aw/d/B009M5L6ES
Re: Samsung Protective Bumper Cover Plus Case
I have the other color.protects OK. Keeps screen away from surface when face down. Let me tell you thou. That **** scratches easier than the phone!
Sent from my SCH-I605 using xda app-developers app
Re: Samsung Protective Bumper Cover Plus Case
gowansta said:
I have the other color.protects OK. Keeps screen away from surface when face down. Let me tell you thou. That **** scratches easier than the phone!
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Is it pretty thin? Also, is the bumper flush with the case on the back? I had a Belkin one on my games horrible.
Don't have it myself, but heard it scratches and very slippery.
I have this case and it's great. My coworker has the black one and it does scratch quite easily and is noticeable, but I have the white one, so it's not too bad. It's slim and protects the screen well. It's not as nice as the OEM S3 one but it works well and matches nicely.
I currently use the black one. It has a great design because the back is glossy which helps you slide the phone in and out of the pocket with ease and offers protection with minimal bulk. You can also put the screen face down without worry of scratching the screen. The buttons are also covered by the bumber so you dont need to worry about the buttons wearing down from moisture.
Sent from my SCH-I605 using xda app-developers app
Just to let you know, if you don't already, that this is more of a case than a bumper. Everyone keeps throwing around the word bumper. This case does have a back. It is not a bumper in the sense that it only surrounds the sides of the phone.
AlphaNoble said:
Just to let you know, if you don't already, that this is more of a case than a bumper. Everyone keeps throwing around the word bumper. This case does have a back. It is not a bumper in the sense that it only surrounds the sides of the phone.
Click to expand...
Click to collapse
Yes. Thanks for clarifying in the thread though. I'm going to give it a try and will report back. I'm not a fan of cases in general, but I dropped my last s3 and it was forever scarred with a scrape on the corner of the bezel.
Seems like it would be cool of Samsung made it so you removed the oem back and then attached the bumper case using the clips. Vs adding a second back.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I ordered one, for the second time. First one I sent back because I also got the Otterbox .
It's a great case. Fits perfectly and is pretty minimal. Would survive a few drops.
Sent from my SCH-I605 using Tapatalk 2
So would this case actually fit with the Samsung OEM wireless charging back attached..? I couldn't find any reports on that.. If anyone knows please let me know as i am interested in purchasing this case but not at the expense of losing the Qi charging capability.. Thank you.
Do I really need a case ?
What quality are materials used for back camera glass (will it scratch), back and silver borders?
Will the phone scratch in above places, by jsut keeping it in clean pocket or on table ?
I am considering case-mate tough case (prolly only good case available in Poland)
Its not as durable as an iphone I would say. If it had real metal for the bezel you could go by without a case. The metallic bezel scratches easily on this one.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
And how about the camera glass? Does it scratch easily?
For me the biggest benefit of a case is more traction in my hand. This freaking thing is slippery without a case!
Sent from my SPH-L710 using xda app-developers app
I've never read a post regarding a scratched camera glass, however the screen will most certainly scratch and it WILL shatter on impact, that much is clear from these forums.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
majorbgss said:
Its not as durable as an iphone I would say. If it had real metal for the bezel you could go by without a case. The metallic bezel scratches easily on this one.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I would have to politely disagree. The iPhone has a poor design in terms of durability. The screen (glass) goes all the way to the edge of the phone, meaning its corner is exposed. This is a bad thing because no matter how durable glass is, a simple hit in its corner will surely crack it.
For example You can take a hammer to a shower door and give it a slight smack on its surface without breaking. However, give it a slight wack on its corner and the WHOLE thing will shatter. This explains how glass as durable as gorilla glass is capable of cracking.
Sent from my SCH-I605 using xda app-developers app
majorbgss said:
Its not as durable as an iphone I would say. If it had real metal for the bezel you could go by without a case. The metallic bezel scratches easily on this one.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Completely disagree. As another poster said, iphones shatter way more thanks to the edges of the glass being highly exposed to impacts.
But as to the OP's questions, why would you NOT protect such an expensive investment?
richii0207 said:
I would have to politely disagree. The iPhone has a poor design in terms of durability. The screen (glass) goes all the way to the edge of the phone, meaning its corner is exposed. This is a bad thing because no matter how durable glass is, a simple hit in its corner will surely crack it.
For example You can take a hammer to a shower door and give it a slight smack on its surface without breaking. However, give it a slight wack on its corner and the WHOLE thing will shatter. This explains how glass as durable as gorilla glass is capable of cracking.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Oh I should have stated that by DURABLE I meant can withstand everyday wear and tear. For concern of droppage, youd want cases protecting both phones.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
HiCZoK said:
Do I really need a case ?
What quality are materials used for back camera glass (will it scratch), back and silver borders?
Will the phone scratch in above places, by jsut keeping it in clean pocket or on table ?
I am considering case-mate tough case (prolly only good case available in Poland)
Click to expand...
Click to collapse
Do you like playing Russian roulette? Unless you have insurance plan with your carrier or somewhere else ($10 a month or something like SqTd for $100, and deductible which could end up being anywhere $100-$200), I would invest in a decent $20-$40 case.
Plenty of posts in this and other forums about people shattering the glass when dropped even with tpu case or other slim plastic cases. Battery door scratch or camera glass scratch will be your least worries when you drop your phone and see a spider web going across your screen from the corner. If you want just additional grip, slim case will do it. But for drop protection you need something beefier with a bumper/lip for protection.
Then Case recommendations please
otterbox commuter
case-mate tough (europe version)
or UAG ... but with this one I would need some instruction on how to ship stuff to Poland. I never bought abroad
HiCZoK said:
Then Case recommendations please
otterbox commuter
case-mate tough (europe version)
or UAG ... but with this one I would need some instruction on how to ship stuff to Poland. I never bought abroad
Click to expand...
Click to collapse
Either of those would be fine. Check out link in my signature for all the cases I have tested/reviewed in this forum. Since it sounds like you don't want too much bulk, for a basic everyday use Tough would be an excellent choice with SURFACE being right behind it. If you are more paranoid and will be using your phone outdoors - UAG is great. If you doing heavy duty construction work outside, CONVERT or Defender will do it. If you want to make bling-bling statement, go with aluminum bumper and fancy carbon fiber battery cover
I'm using two cases now: a UAG for when I'm at work and a Seido Snap case as a general walking around case. Both cases allow me to hide an RFID card in them for work access.
The phone itself is too slippery NOT to be in a case.
I don't know how you guys are saying this phone is very slippery. Its pretty slick with no case. The matte cases make it more smooth and slippery iMO
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
HiCZoK said:
Then Case recommendations please
otterbox commuter
case-mate tough (europe version)
or UAG ... but with this one I would need some instruction on how to ship stuff to Poland. I never bought abroad
Click to expand...
Click to collapse
I strongly recommend you the Samsung Protective Cover +.I think you can find it in online shops from Poland ,or stores like Orange ,Vodafone and so on.I bought it from an online shop from Romania.It's pretty cheap.Fits very well ,had it for 3 months It adds the right amount of bulk.It's like 10,3 mm I think.It has raised borders around the screen ,so if it falls,it won't touch the screen.The back is glossy ,but the sides are offering a great grip
Also doesn't affect S Pen ,NFC ,flash or something else.There are 3 colors available:Black White and Pink.Any of these colors has white borders.Do a google search and you'll see.Ah,forgot to mention:I dropped it one time with the case on,the only thing that happened is that the S Pen went flying.
I use an invisible shield and that's all. Unless you handle your phone without care, then a case isn't really necessary unless alcohol becomes part of the equation. I have dropped my phone with the flip cover on concrete, to see it slide down the road in pieces. It didn't break nor did it have any drop damage, but I feel if I had a case, the force would have been expelled through the screen.
Samsung protcrive cover + interested me. It is nice. Have rubber raised above screen and is cheaper than others.
Anyone care to share his opinion?
Thanks for all answerws. I am still investigating other cases aswell
HiCZoK said:
Samsung protcrive cover + interested me. It is nice. Have rubber raised above screen and is cheaper than others.
Anyone care to share his opinion?
Thanks for all answerws. I am still investigating other cases aswell
Click to expand...
Click to collapse
It was discussed as well before, rubber bumper is good, but the back part will scratch like hell. That was #1 complain about it. Also if you buy it online beware of CH cheap knockoffs.
My camera lens actually scratched somehow. Might have been when I accidentally put it in a pocket with my keys but I have never dropped it without a case on.
i dropped mine once on concrete and the screen shattered
xartic12 said:
I use an invisible shield and that's all. Unless you handle your phone without care, then a case isn't really necessary unless alcohol becomes part of the equation. I have dropped my phone with the flip cover on concrete, to see it slide down the road in pieces. It didn't break nor did it have any drop damage, but I feel if I had a case, the force would have been expelled through the screen.
Click to expand...
Click to collapse
You are most certainly the exception and should consider yourself lucky... This forum is riddled with people who cracked their screen from minimal falls even while having a case on it.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
what case are you guys using ?
I am using the samsung's official s-view case and I dropped my phone the other day and now i have a dent on the top and bottom outter corners on the metal frame since this case does not protect it well....
i am looking for suggestions for a thin case that covers the body and have s-view window...
any suggestions ?
Spigen bounce for me. Its thin and form fitting around all the corners. Only problem is 2 color choices, black and grey (light black).
Costs more than a generic tpu case but it looks and feels better.
I just ordered a spigen neo hybrid car from Amazon for 24$ (10 bucks cheaper than oem) it looks sick. I'll let you know how I like it on Monday. I got the yellow lined one
Sent from my SAMSUNG-SM-N900A using xda app-developers app
So I got my case yesterday. It's looks okay, not as good as I was hoping (I got the yellow banded one)
The aux port is obstructed by the thickness of the case. I have to remove the case to use in my car.
The buttons move in place, and are audible when moving the phone.
It makes the phone even slippier
Would not buy again
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Any idea what case to get that will protect the screen from getting damaged????
It's fake metal around the edge..aka plastic. I have the neo hybrid but it adds a Lotta bulk. I got naked
sEnt from thE noTe 3
Im using otterbox defender.
Sent from my SAMSUNG-SM-N900A using xda premium
Using the UAG Scout.. not as bulky as otterbox but great protection. On sale for about $30 right now on Amazon.
sent from my Samsung Galaxy Note 3 (AT&T)
I could have told everyone about the spigen neo hybrid from my experience with their S4 case. It's one of the most overrated cases on the market, I'm not sure why people love it so much.
It looks and feels much cheaper in person than in pics and it makes the phone much bulkier and wider than it needs to be. And it's ridiculously overpriced for what it is.
Thumbs way down, I will never buy a spigen again.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Suggestions then??? Thanks
Sent from my SAMSUNG-SM-N900A using Tapatalk
redrover69 said:
Suggestions then??? Thanks
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
If you want a fairly inexpensive no frills case, check out the one from Caseology. I got one for $3.50 on a deal from slickdeals and it's a great case with decent protection for the price. Even at the regular $8.50 price I would say it's well worth it.
http://www.amazon.com/gp/aw/d/B00F8P9UFS/ref=mp_s_a_1_1?qid=1385390284&sr=8-1&pi=SY200
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Cool. What about screen protection??
Sent from my SAMSUNG-SM-N900A using Tapatalk
I'm using an iSmooth screen protector. Application was the smoothest of any screen protector I've used so far - but I don't know how much of that is just practice applying them. The screen looks beautiful, with no rainbow patterns, and grease resistance is good (the Spigen ones I used before on my original note, I had a harder time of applying, and both Crystal and Oleophobic ones accumulated grease like nobody's business, particularly the supposedly oleophobic one, and the crystal had slight rainbow patterns visible in the right light).
As for cases, I'm not using one; I don't like the added bulk from them - I instead used Sugru to mold little bumpers directly on the corners of the phone. The corner around the S-Pen is kinda tricky, since there's what looks like a mic on the long side, and very little space between the pen and the speaker on the bottom. I used 3 little pieces of sugru around there. I also put a little bumper below the volume rocker, so I can quickly find the volume buttons when the phone is in my pocket. The sugru comes off cleanly (scrape it off with a fingernail). It lasts pretty well, but it will need to be redone at least once during a two year contract, more if the phone is handled roughly.
Thoughts on the S view case?
I think Im mostly concerned with the glass cracking than anything else...
Right now i am rocking the Incipio DualPro case and am waiting for a case from Cuzerlite to come in.
I got the Tudia Melody and it's perfect. 8 bucks to boot. It adds a nice grip to the phone and covers up the chrome lining on the front. You know the part that looks terrible even with a minor scuff? No screen protection except for the raised edges.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
If you want protection and don't mind added bulk the Otterbox Defender is the only way to go. I personally have large hands and prefer the thickness and bulk the Defender adds. Plus you can throw it at a wall and it will not hurt the phone. The built in screen protector is hard plastic and will protect from most surface scratches. Of course direct impacts to the screen will almost always break it on large device like this and there is no case or protector that protects from direct impacts. So for screen protection you just have to take what you can get.
For me the Ottorbox has been the only way to go for my last five phones.
@Solarenemy68 while last year me would agree with you, I found another case company called trident with a similar design. There a bit cheaper too (price not quality!!) long story short, mine came today and it is amazing. Has a built in metal kickstand. (Had a bad experience with my last phone cuz of otterbox's customer service. So tried something new)
Sent from my SM-N9005 using xda app-developers app
Roundtableprez said:
@Solarenemy68 while last year me would agree with you, I found another case company called trident with a similar design. There a bit cheaper too (price not quality!!) long story short, mine came today and it is amazing. Has a built in metal kickstand. (Had a bad experience with my last phone cuz of otterbox's customer service. So tried something new)
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
I had a trident case for my LG phone.. To be honest I did not like the finish or quality of the plastic. The plastic looked too military.
Solarenemy68 said:
I had a trident case for my LG phone.. To be honest I did not like the finish or quality of the plastic. The plastic looked too military.
Click to expand...
Click to collapse
Maybe it's gotten better? Lol
Sent from my SM-N9005 using xda app-developers app