I have an S5830D that I flash an CM7 rom to (APOCALYPSE-FINAL), I'm now looking at getting back to stock. I'm having trouble getting my CWM restore back. Now after doing some searching I realized I would need to flash a stock firmware version through odin. I went out and found what i believe is the correct firmware version for this Koodo model (the name is S5830DTLKI4_S5830DTLSKI4_S5830DTLKI4_HOME.tar.md5) and tried to flash it.
Everything in odin goes through fine up to the point where it restarts the phone, Ill attach a screenshot of what shows up for me. After the screen shows up is when I get stuck in a bootloop where the phone model shows, then the koodo bootanimation shows followed by the samsung logo. I should note though I still have complete access to recovery, the downloader mode, and even the CM rom when i restore that backup. The fact I have access to all those gives me hope as I'm sure this could be reversed.
Any advice on how I can restore this phone to stock would be greatly appreciated. I'm not very familiar with samsung devices so please try to be patient with me as I realize I have gotten into something over my head.
PS Sorry about the glare on the image its the best I could do as it disappears quickly.
Jeklund said:
I have an S5830D that I flash an CM7 rom to (APOCALYPSE-FINAL), I'm now looking at getting back to stock. I'm having trouble getting my CWM restore back. Now after doing some searching I realized I would need to flash a stock firmware version through odin. I went out and found what i believe is the correct firmware version for this Koodo model (the name is S5830DTLKI4_S5830DTLSKI4_S5830DTLKI4_HOME.tar.md5) and tried to flash it.
Everything in odin goes through fine up to the point where it restarts the phone, Ill attach a screenshot of what shows up for me. After the screen shows up is when I get stuck in a bootloop where the phone model shows, then the koodo bootanimation shows followed by the samsung logo. I should note though I still have complete access to recovery, the downloader mode, and even the CM rom when i restore that backup. The fact I have access to all those gives me hope as I'm sure this could be reversed.
Any advice on how I can restore this phone to stock would be greatly appreciated. I'm not very familiar with samsung devices so please try to be patient with me as I realize I have gotten into something over my head.
PS Sorry about the glare on the image its the best I could do as it disappears quickly.
Click to expand...
Click to collapse
If you have complete access to recovery mode, try wiping data and cache after flashing with Odin. That does the trick for me when I have a bootloop after flashing with Odin.
ImSoBored said:
If you have complete access to recovery mode, try wiping data and cache after flashing with Odin. That does the trick for me when I have a bootloop after flashing with Odin.
Click to expand...
Click to collapse
Agreed... reboot into recovery and clear cache and dalvik cache and then reboot.
So I've just completed a new flash with odin, I went in and flashed cwm then proceeded to factory reset, wipe cache, wipe dalvik, and I even do battery reset. Every wipe goes fine except for when I attempt to do the factory reset I received the following error:
Code:
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
Even after those wipes it still bootloops but thats most likely as the factory reset didn't work.
Jeklund said:
So I've just completed a new flash with odin, I went in and flashed cwm then proceeded to factory reset, wipe cache, wipe dalvik, and I even do battery reset. Every wipe goes fine except for when I attempt to do the factory reset I received the following error:
Code:
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
Even after those wipes it still bootloops but thats most likely as the factory reset didn't work.
Click to expand...
Click to collapse
Try not using CWM, or your SD card may be corrupt and you have to format it, I'm not sure though.
ImSoBored said:
Try not using CWM, or your SD card may be corrupt and you have to format it, I'm not sure though.
Click to expand...
Click to collapse
That did it, for some reason I had this thought in my head I had to flash cwm right away and clear stuff that way. Once odin finished I went in recovery and wiped data and cache through the stock recovery and it booted right up. Thanks for the help really appreciate it.
Related
If someone has any suggestions that would be great. I have flashed multiple roms but never had a desire to create one so I know my way around linux/andriod. Anyways my cache partition is screwed, it wont let me format it convert it anything. The only rom I can get to run on the tab is spacemooses gingerbread which clears everything on reboot. Sprint tab btw.
Have you tried going back to original stock? Do an Odin or Heimdall flash for EA24, and it should wipe everything out and get you back to normal.
yeap tried that and DJ30 both boot loop before even getting to the first sprint screen.
if you've tried the full EA24 flash with pit file to repartition the Tab, then you probably have a hardware issue if it's still boot looping. Are you able to get into stock recovery and try to do a factory wipe, and or cache wipe?
yea i have tried that also, i haven't tried with the pit file on EA24, it was on DJ30 that i used it. Anything Gingerbread based will boot to the second samsung screen and then just hang, anything Froyo based just boot loops at the first samsung screen, Spacemooses honeycomb will boot but take about a hour. When i try to wipe data/factory reset it says cannot format cache partition in factory recovery and clockwork. Ill post here in a bit the actually message it gives me.
This concerns my galaxy note n7000. I had a rooted checkrom v4 working on my note. I tried to install criskelorom v2 and got bootloops. I then tried to go back to stock via odin and flashed stock N7000 KL3 ROM which i had earlier used, I had to go to stock because after bootloop even recovery was not working. now after flashing stock i am getting a strange problem of the phone getting stuck at the welcome to gt-n7000 screen . "touch the android to begin" . nothing is happening after touching the android on the screen although i can change the language etc and even the pull down notification is also working but the phone is stuck at the initial stage. I have a nandroid backup of my initial checkrom in my internal sd card but cannot restore it before installing a rom with root and cwm. Kindly help . Thanks.
I'm having the exact problem. I'm hoping we can create a soft brick sticky thread. I walked away from my phone last night because I was getting frustrated.
My attempts to flash stock ROM via Odin resulted in the "not responding" message in windows. I can get to both CWM and download mode, however any ROM flashed via CWM results in the behavior described by the OP. fortunately I have access to another Samsung phone, so I can double check driver installation (although it worked for flashing previously).
I'm continuing a search through the forums to find some alternate methods for unbricking. Hope someone has an idea.
Thanks!
It seems that the stock roms i was trying to flash were nonwipe ones so i flashed xxla3 which is a wipe rom and was able to boot . I then flashed the earlier kl3 rom over this rom because kl3 is rootable. I then rooted and installed cwm booted into recovery and restored my earlier nandroid backup. I think the situation arises because the nonwipe rom was unable to clear the cache , user data etc
Thank you for the information. I had exactly the same problem. What did you use to root KL3 ?
Just wipe both cash and user data, and reboot.
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
and do a factory reset and wipe cache.
problem should be solved cause that's what i did
Flo1389 said:
Just wipe both cash and user data, and reboot.
Click to expand...
Click to collapse
Thanks
liewkingyan said:
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
And do a factory reset and wipe cache.
Problem should be solved cause that's what i did
Click to expand...
Click to collapse
daaamnnn!!! I'm scared to dead because of this!! Thanks dude!!!, no more **** ass ics
I had an issue like this once or twice.
http://www.youtube.com/watch?v=L5XjF6sPef4
This skips the that screen. then I cleared some things like google framework and it all was peachy
But its not wroking for me
I downloaded ROM Toolbox Pro, and installed a boot animation. Upon restarting, I became stuck in a boot loop that toggled back and forth between Corn Kernel's screen and the AT&T logo screen. I CAN get into CWM, however I cannot wipe all data. Of course I tried "install update.zip", reformatting, wipe dalvik cache, etc. I then installed Legend's KK4 Rom onto my SD Card and tried to flash that, but it won't install, keeps saying "Installation Aborted". I ALSO can connect my phone to my laptop with no issues, but I'm not sure what to do from there.
I am perfectly willing to flash back to stock, but I cannot wipe all data. Is Odin Master Clear my only hope? Any suggestions would be greatly appreciated at this point, as I have tried everything in the CWM menu and do not know what else to do.
Does anyone have any suggestions? I have searched this forum thoroughly, as well as Google. Just need a little guidance. Please, any help would be GREATLY appreciated.
You should be able to grab a stock ROM and flash it. No need for Master clear, the flashing of the stock ROM should take care of it.
Thank you, I'll try that now.
My i9305 LTE is caught in a boot loop (just loops the start-up screen of any ROM I install). I have access to CWM recovery v6.0.4.5 and also download recovery.
The only thing I can think that might have caused this was when I installed Archidroid I (foolishly?) selected the only partition that wasn't ext4, to be set as ext4. It's not booted past any of the bootscreens on any ROM since I did this.
I've tried wiping all data and cache and also doing a data/factory reset and every "clear data" option available and I'm still caught in a boot screen loop on any ROM I try.
I've formatted each of the folders on the device by mounting and formatting (I don't need to keep any data on the phone) and then to get a new ROM on the phone I've inserted an SD Card, mounted it in CWM recovery and installed it from the .zip that way, all ROMs I've tried just lock up at their boot screen, it just loops over and over.
I've searched this forum and on Google but cannot find a solution or anyone with a similar issue, most that have had a similar looping problem say they performed an Odin factory reset, which brings me to my next question.
I don't know the region of my phone as I cannot access the dialler or any of my settings to find out the region, and forgot (as I rooted so long ago). I do have on the back of the phone the codes:
FCC ID: A3LGI9305
SSN: -I9305GSMH
as well as my IMEI #
How do I know my phone region, and which firmware/rom would I use to perform a full factory reset to at least get it booting again?
Any tips/ideas please, that would be much appreciated.
likeasir said:
My i9305 LTE is caught in a boot loop (just loops the start-up screen of any ROM I install). I have access to CWM recovery v6.0.4.5 and also download recovery.
The only thing I can think that might have caused this was when I installed Archidroid I (foolishly?) selected the only partition that wasn't ext4, to be set as ext4. It's not booted past any of the bootscreens on any ROM since I did this.
I've tried wiping all data and cache and also doing a data/factory reset and every "clear data" option available and I'm still caught in a boot screen loop on any ROM I try.
I've formatted each of the folders on the device by mounting and formatting (I don't need to keep any data on the phone) and then to get a new ROM on the phone I've inserted an SD Card, mounted it in CWM recovery and installed it from the .zip that way, all ROMs I've tried just lock up at their boot screen, it just loops over and over.
I've searched this forum and on Google but cannot find a solution or anyone with a similar issue, most that have had a similar looping problem say they performed an Odin factory reset, which brings me to my next question.
I don't know the region of my phone as I cannot access the dialler or any of my settings to find out the region, and forgot (as I rooted so long ago). I do have on the back of the phone the codes:
FCC ID: A3LGI9305
SSN: -I9305GSMH
as well as my IMEI #
How do I know my phone region, and which firmware/rom would I use to perform a full factory reset to at least get it booting again?
Any tips/ideas please, that would be much appreciated.
Click to expand...
Click to collapse
what country do you live? the region is the country you live in, just search for your official firmware on sammobile or samsung update site. and download the firmware for your country, flash it with odin.
also update your recovery to the latest available in your case cwm 6.0.4.7
PHP:
MaHo_66 said:
what country do you live? the region is the country you live in, just search for your official firmware on sammobile or samsung update site. and download the firmware for your country, flash it with odin.
also update your recovery to the latest available in your case cwm 6.0.4.7
Click to expand...
Click to collapse
I live in Australia but am slightly worried as I bought my phone from Koga online so it's an internationally shipped phone I think originally intended for the uk as it had a uk adaptor for the plug does this matter?
likeasir said:
PHP:
I live in Australia but am slightly worried as I bought my phone from Koga online so it's an internationally shipped phone I think originally intended for the uk as it had a uk adaptor for the plug does this matter?
Click to expand...
Click to collapse
Hmm... Good question. I understand your issue here but im afraid i cant answer this.. While it was working what firmware was running on it? What baseband? If you have any kind of info of the working firmware, analyze it with firmwares on those sites and try to find the one you need.
Sent from my GT-I9305 using XDA Premium 4 mobile app
likeasir said:
My i9305 LTE is caught in a boot loop (just loops the start-up screen of any ROM I install). I have access to CWM recovery v6.0.4.5 and also download recovery.
The only thing I can think that might have caused this was when I installed Archidroid I (foolishly?) selected the only partition that wasn't ext4, to be set as ext4. It's not booted past any of the bootscreens on any ROM since I did this.
I've tried wiping all data and cache and also doing a data/factory reset and every "clear data" option available and I'm still caught in a boot screen loop on any ROM I try.
I've formatted each of the folders on the device by mounting and formatting (I don't need to keep any data on the phone) and then to get a new ROM on the phone I've inserted an SD Card, mounted it in CWM recovery and installed it from the .zip that way, all ROMs I've tried just lock up at their boot screen, it just loops over and over.
I've searched this forum and on Google but cannot find a solution or anyone with a similar issue, most that have had a similar looping problem say they performed an Odin factory reset, which brings me to my next question.
I don't know the region of my phone as I cannot access the dialler or any of my settings to find out the region, and forgot (as I rooted so long ago). I do have on the back of the phone the codes:
FCC ID: A3LGI9305
SSN: -I9305GSMH
as well as my IMEI #
How do I know my phone region, and which firmware/rom would I use to perform a full factory reset to at least get it booting again?
Any tips/ideas please, that would be much appreciated.
Click to expand...
Click to collapse
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo or even if i recovered device from odin through emergency frimware and intillation
Also tried customs 4.3 roms stuck a boot logo
Here what u should try and what i did
1 flash philz recovery + 4.1.2 rom
if it works back up efs
2 Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
3 in mount and storage section format everything ( THINK THIS IS THE MOST IMPORTANT STEP )
4 Used odin to flash a 4.3 stock package it worked ( note u may get knox from this u may try a modifed stock package if u dont have knox and dont want to get it )
AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo or even if i recovered device from odin through emergency frimware and intillation
Also tried customs 4.3 roms stuck a boot logo
Here what u should try and what i did
1 flash philz recovery + 4.1.2 rom
if it works back up efs
2 Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
3 in mount and storage section format everything ( THINK THIS IS THE MOST IMPORTANT STEP )
4 Used odin to flash a 4.3 stock package it worked ( note u may get knox from this u may try a modifed stock package if u dont have knox and dont want to get it )
Click to expand...
Click to collapse
Thanks for your suggestion, I'll give that a shot tonight. I'm able to get into CWM as explained, mount and format everything so I'm not sure that this step will make a difference, but I'll do it again anyway.
So I'll see how it goes tonight. Actually been quite refreshing without a phone these past couple of days
likeasir said:
Thanks for your suggestion, I'll give that a shot tonight. I'm able to get into CWM as explained, mount and format everything so I'm not sure that this step will make a difference, but I'll do it again anyway.
So I'll see how it goes tonight. Actually been quite refreshing without a phone these past couple of days
Click to expand...
Click to collapse
I managed to fix it, but it had me totally stumped for a while.
I flashed philz recovery and then formatted all of the directories as I'd done previously on CWM.
I tried Slim Rom which didn't work.
I ended up tying CyanogenMod stable which actually worked, it got past the boot loop phase! - I was glad to see a setup screen after 2 days!
I then had another issue with my Cell Reception not working, no data or reception would be shown.
This seemed to happen since I tried a KitKat ROM, as I remember before the bootloop it did this on a couple of ROMs I tried to manually enter the APN over and over and it wouldn't let me save it, very annoying.
I checked the baseband in the about phone section and it was being displayed as "unknown", luckily I remembered my baseband # from when I rooted the phone about 8 months ago (XXBLL3), then I found on this forum a list of 9305i baseband downloads as .zips so I was able to load up CWM and flash it, reboot and it worked!
I will be keeping with CM Stable (10.1.3) for a while now.
I hope this helps someone else that might run into a similar issue.
likeasir said:
I managed to fix it, but it had me totally stumped for a while.
I flashed philz recovery and then formatted all of the directories as I'd done previously on CWM.
I tried Slim Rom which didn't work.
I ended up tying CyanogenMod stable which actually worked, it got past the boot loop phase! - I was glad to see a setup screen after 2 days!
I then had another issue with my Cell Reception not working, no data or reception would be shown.
This seemed to happen since I tried a KitKat ROM, as I remember before the bootloop it did this on a couple of ROMs I tried to manually enter the APN over and over and it wouldn't let me save it, very annoying.
I checked the baseband in the about phone section and it was being displayed as "unknown", luckily I remembered my baseband # from when I rooted the phone about 8 months ago (XXBLL3), then I found on this forum a list of 9305i baseband downloads as .zips so I was able to load up CWM and flash it, reboot and it worked!
I will be keeping with CM Stable (10.1.3) for a while now.
I hope this helps someone else that might run into a similar issue.
Click to expand...
Click to collapse
Cheers on getting ur phone fixed but after wiping all directories a stock rom flash would have cleared all the problems
lol i just did this to my phone, time to find a stock firmware.
So I was running a custom rom for months now for my N910T without issue but yesterday the phone suddenly rebooted by itself while I was using it and would keep rebooting roughly every 3min.
I backed up everything in TWRP and wiped everything to reboot into a clean rom like factory reset but that didn't work as everything was still there and nothing was wiped. So I tried to flash a new rom but it failed and gave an error E: cannot execute upgrade binary.
I'm on TWRP 2.8.1.1 so I can't flash a TWRP update (have to be on 2.8.4 or above) and thought my recovery was too old. I then plugged phone in download mode and used ODIN to flash a new TWRP. It would write fail every time, no matter what I changed. I tried to install different versions of recovery and used different versions of ODIN with no success.
I also changed different cables and ports. I then tried to flash a stock rom through ODIN but it also says write fail. Basically I tried everything and searched on XDA and google and tried every method I came across. Anyone have this issue or suggestions?
tldr: Phone N910T reboots from home screen, write fail flash from ODIN and fail flash from TWRP recovery. Can't use phone because it would boot to home screen for a few min then just reboot again. Help!
tiskewlio said:
So I was running a custom rom for months now for my N910T without issue but yesterday the phone suddenly rebooted by itself while I was using it and would keep rebooting roughly every 3min.
I backed up everything in TWRP and wiped everything to reboot into a clean rom like factory reset but that didn't work as everything was still there and nothing was wiped. So I tried to flash a new rom but it failed and gave an error E: cannot execute upgrade binary.
I'm on TWRP 2.8.1.1 so I can't flash a TWRP update (have to be on 2.8.4 or above) and thought my recovery was too old. I then plugged phone in download mode and used ODIN to flash a new TWRP. It would write fail every time, no matter what I changed. I tried to install different versions of recovery and used different versions of ODIN with no success.
I also changed different cables and ports. I then tried to flash a stock rom through ODIN but it also says write fail. Basically I tried everything and searched on XDA and google and tried every method I came across. Anyone have this issue or suggestions?
tldr: Phone N910T reboots from home screen, write fail flash from ODIN and fail flash from TWRP recovery. Can't use phone because it would boot to home screen for a few min then just reboot again. Help!
Click to expand...
Click to collapse
have you tried doing a factory reset/data wipe
xnknown said:
have you tried doing a factory reset/data wipe
Click to expand...
Click to collapse
Yes I tried every wipe option possible. Wipe system, boots right into rom. Wipe internal, everything still there. Wipe data, factory reset, everything still there.
tiskewlio said:
Yes I tried every wipe option possible. Wipe system, boots right into rom. Wipe internal, everything still there. Wipe data, factory reset, everything still there.
Click to expand...
Click to collapse
Then something I'm your phones been corrupted probably, your going to have to rma for a new device
has anybody come up with a solution to this problem im having serious boot and loading issues. i have flashed many roms and have never had a problem. i odin flashed the cog2 firmware then twrp flashed the tekxodus rom. something happened changing permissions with the built in setting with the rom and twrp was lost and i cant get back to a usable phone. odin flashed everything i can find for my phone and its not working everything either falis or goes to loop.
You probably corrupted your partition doing something wrong