My 4G LTE data connection wont work and if its a problem with my APN Settings I want to find out the correct settings. I have AT&T and I'm in a LTE area.
tapout1382 said:
My 4G LTE data connection wont work and if its a problem with my APN Settings I want to find out the correct settings. I have AT&T and I'm in a LTE area.
Click to expand...
Click to collapse
Surely at&t has the settings written on there website some where. Search there. Otherwise call them or the store witch you got it from.
Sent from my GT-I9305 using XDA Premium HD app
tapout1382 said:
My 4G LTE data connection wont work and if its a problem with my APN Settings I want to find out the correct settings. I have AT&T and I'm in a LTE area.
Click to expand...
Click to collapse
it tryed If you have 3G Code:
Name: Cingular 410
APN: wap.cingular
Proxy: Blank
Port: Blank
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mms.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: Blank
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms
APN protocol: leave as is
Bearer: leave as is
If you have 4G Code:
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is
I have similar problems using Telstra in Australia. The phone just don't want to go into LTE mode. I am using Wanam ROM if that has anything to do with it.
Related
My Captivate can read the SIM Card, but I can't connect to the AT&T service.
I go to Settings > Wireless & Network > Mobile Netoworks > Network Operators > And select AT&T, but it says "Your SIM card does not allow a connection to this network."
On Perception 9.5, When I do the same thing, It says "Unable to connect. Try again later."
I flashed other ROMs and they all do the same thing.
Help?
Are you using an AT&T sim that has a data plan enabled?
ua549 said:
Are you using an AT&T sim that has a data plan enabled?
Click to expand...
Click to collapse
Yep. 3G, Calling and SMS was all working before.
Have you manually checked the apn settings?
newter55 said:
Have you manually checked the apn settings?
Click to expand...
Click to collapse
Yeah.
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
User name: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC 410
Authentication type: None
APN type: Internet + SMS
Rikusaki said:
Yeah.
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
User name: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC 410
Authentication type: None
APN type: Internet + SMS
Click to expand...
Click to collapse
Did you flash a new rom recently? Maybe the modem isn't playing nice.
If nothing else, go get a new sim from the local store and see if that fixes it.
DarrellRaines said:
Did you flash a new rom recently? Maybe the modem isn't playing nice.
If nothing else, go get a new sim from the local store and see if that fixes it.
Click to expand...
Click to collapse
Yeah, I flashed multiple roms (Perception, Doc's, Darky, GingerClone...). They all do the same thing.
I guess I will just head over to AT&T and get a new SIM.
what are the apn setting for hspa+ and lte for etisalat in Dubai, UAE
Use this format pls
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is
Could someone please post your default apn from the Xperia TL LT30at from AT&T?
I moved on to an unlocked ZL and I downloaded the settings but I believe the apn is different.
I would like to enter the TL's default to see if improves speed.
augie7107 said:
Could someone please post your default apn from the Xperia TL LT30at from AT&T?
I moved on to an unlocked ZL and I downloaded the settings but I believe the apn is different.
I would like to enter the TL's default to see if improves speed.
Click to expand...
Click to collapse
AT&T 2G / 3G:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
AT&T LTE:
Name: ATT PTA
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri
AT&T HSPA+ (requires PHONE and MMS):
Name: ATT MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: -
Password: -
Server: -
MMSC: http://mmsc.cingular.com/
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: -
APN Type: mms,supl
APN Protocol: ipv4
Name: ATT PHONE
APN: phone
Proxy: -
Port: -
Username: -
Password: -
Server: -
MMSC: -
MMS Proxy: -
MMS Port: -
MCC: 310
MNC: 410
Authentication Type: -
APN Type: default,internet
APN Protocol: ipv4
AndroidHoneyComb said:
AT&T 2G / 3G:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
AT&T LTE:
Name: ATT PTA
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri
AT&T HSPA+ (requires PHONE and MMS):
Name: ATT MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: -
Password: -
Server: -
MMSC: http://mmsc.cingular.com/
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: -
APN Type: mms,supl
APN Protocol: ipv4
Name: ATT PHONE
APN: phone
Proxy: -
Port: -
Username: -
Password: -
Server: -
MMSC: -
MMS Proxy: -
MMS Port: -
MCC: 310
MNC: 410
Authentication Type: -
APN Type: default,internet
APN Protocol: ipv4
Click to expand...
Click to collapse
I've seen all of these, thank you. Do you have a TL? If yes, which one of these is operational on it?
augie7107 said:
I've seen all of these, thank you. Do you have a TL? If yes, which one of these is operational on it?
Click to expand...
Click to collapse
Yes, I do own a Xperia TL, all of these apn's work with the tl
I use the
AT&T LTE:
Name: ATT PTA
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri
Xperia T with ATT
AndroidHoneyComb said:
Yes, I do own a Xperia TL, all of these apn's work with the tl
I use the
AT&T LTE:
Name: ATT PTA
APN: pta
MMSC:
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri
Click to expand...
Click to collapse
Hi, I just got an Xperia T and am having trouble getting it to work with the ATT data network (ATT is no help surprise surprise). For a 'Xperia T' will any of the APNs above work, or will I need something else?
Thanks!!
Hutch5000 said:
Hi, I just got an Xperia T and am having trouble getting it to work with the ATT data network (ATT is no help surprise surprise). For a 'Xperia T' will any of the APNs above work, or will I need something else?
Thanks!!
Click to expand...
Click to collapse
All of these work on any ROM if your using att. I reccemond you use the 4GLTE one
I can't seem to find a definite answer from the big devs here, so I'll ask everyone. What works for you?
Sent from my MB886 using xda app-developers app
The one at mmsc.mobile.att.net
Sent from my PACMAN MATRIX HD MAXX
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is
Sent from my MB886 using xda premium
This works for me, including LTE (If it's not listed, leave it as it is)
Name: ATT LTE
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MOC: 310
MNC: 410
APN Type: default,admin,mms,supl,hipri
TenguSnake said:
This works for me, including LTE (If it's not listed, leave it as it is)
Name: ATT LTE
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MOC: 310
MNC: 410
APN Type: default,admin,mms,supl,hipri
Click to expand...
Click to collapse
This is what I always run
So I tried those last night and I was getting 2g then I kept everything the same except put HSDPA+ instead of lte and that kinda worked . I really like echo's new halo7 ROM but I have to have my data . 1 other question youngguns how do I find my voicemail info so I can put it in my contacts and actually get my voicemail. I have learned a lot from you man , this is my first android ( I had finally figured out WP7 Lol) and I have been able to flash all ROMs except 2 using the photon version of cwm recovery and as bad that anyways lol thanks
Sent from my MB886 using xda app-developers app
So i have a galaxy skyrocket sgh-i727, and recently I bought a sim card for us mobile. Now calling and texting works perfectly fine. But when I try to use data it never works. Now i changed the apn settings for us mobile yet it still doesnt work. here are the settings,
ame: US Mobile
APN: pwg
Proxy:
Port:
Username:
Password:
Server:
MMSC:http://pwg.mmsmvno.com/mms/wapenc
MMS Proxy:
MMS Port:
MCC: 310
MNC: 260
APN Type: default,supl,mms,admin
If no APN settings are present, a restore to factory default settings may be required.