[Q] ADB Device Not Recognized - 7" Kindle Fire HD Q&A, Help & Troubleshooting

Any help with my problem would be greatly appreciated!
Recently I managed to soft brick my Kindle Fire HD 7", and hoped to use the "KFHD System.img Restore Tool" to fix. I bought a factory cable and was able to put my Kindle into fastboot mode. Prior to this I had ADB installed so I could root my KFHD (which I did).
Now obviously when I rooted my KFHD, ADB recognized my device then. Unfortunately, now I have no such luck. While in fastboot I tried to use the command ---> adb shell su -c "reboot bootloader" <--- but I kept getting error messages that stated there was no recognized device.
I re-installed the AndroidSDK file to ensure there were no errors there and tested ADB with successful results. I also re-installed the Device Drivers and made sure that in my device manager under Kindle Fire it said "Android ADB composite interface" (or similar, I don't remember off of the top of my head). I went back and tested again, and ADB still does not recognize my device while in fastboot. I then left my Kindle on until it ran out of battery to test to see if ADB would recognize when out of fastboot.
After turning on my Kindle when not in fastboot, I typed in the command prompt "adb devices" and no device showed up. Also, now under my device manager "Android ADB composite interface" or whatever doesn't even show up. I have searched over and over again on many forums with no luck. Does anyone know what I am doing wrong? Or what I should try doing?
Sorry for that ^huge story^ but thanks in advance for any feedback!

ADB and fastboot are completely different programs that work in completely different modes. And entering ’ adb shell su -c "reboot bootloader" ’ is pointless because (even if adb commands in fastboot were possible) fastboot mode is the "bootloader" part of the aforementioned command.
"That's a special kind of stupid. The kind that makes me laugh."

I have a similar problem with both linux and windows 8
I have a factory cable and the kindle is in fastboot mode
Under linux I just get a "waiting for fastboot" upon entering a command
Under windows I have an otter2-prod-04 device which I have no drivers for. I have tried the latest ADB composite drivers and the amazon kindle ones.
I'm pulling my hair out now, not only have I got into this situation that I need to restore but now find I cant!!
Any help, please....
Bryan

bryanchapman9999 said:
I have a similar problem with both linux and windows 8
I have a factory cable and the kindle is in fastboot mode
Under linux I just get a "waiting for fastboot" upon entering a command
Under windows I have an otter2-prod-04 device which I have no drivers for. I have tried the latest ADB composite drivers and the amazon kindle ones.
I'm pulling my hair out now, not only have I got into this situation that I need to restore but now find I cant!!
Any help, please....
Bryan
Click to expand...
Click to collapse
In Linux, you need udev rules set for adb and sometimes fastboot. And from what I've seen, Windows 8 is incompatible with the Android device drivers.
"That's a special kind of stupid. The kind that makes me laugh."

soupmagnet said:
In Linux, you need udev rules set for adb and sometimes fastboot. And from what I've seen, Windows 8 is incompatible with the Android device drivers.
"That's a special kind of stupid. The kind that makes me laugh."
Click to expand...
Click to collapse
Ive been using the android drivers on windows 8 without an issue. They have to be manually installed and driver signing needs to be turned off.
Sent from my KFOT using Tapatalk 2

soupmagnet said:
ADB and fastboot are completely different programs that work in completely different modes. And entering ’ adb shell su -c "reboot bootloader" ’ is pointless because (even if adb commands in fastboot were possible) fastboot mode is the "bootloader" part of the aforementioned command.
Click to expand...
Click to collapse
I see, well the program seemed to work fine without it apparently (the line of code). My Kindle is working perfectly again! Thank you for the reply.

Related

[Q] adb devices doesn't recognize n1

Been trying to root N1(FRG83) without unlocking bootloader. Downloaded android-sdk to c: drive and downloaded usb driver.
When I boot the N1 into fastboot mode and type fastboot from the cmd prompt on the computer it sees the phone and gives me the serial (HT****)
When I try the same thing from ADB (ADB devices) it doesn't recognize the phone. I just get a blank line and go back to the command prompt. I've tried this on 2 machines (1 Vista the other Windows 7) and get the same results.
The frustrating thing is that I actually had the phone recognized with the ADB devices command when I first set it up but got called away from the computer and never had a chance to run the rooting routine.
Anybody out there solved this problem?? All help appreciated.
Thanks.
download and install the sdks and nexus ine drivers manually.
thanks but no luck
Downloaded drivers as you suggested but no luck. Also tried reinstalling sdk. Debugging is on, Java is installed, I'm out of ideas for the moment.
astron46 said:
Downloaded drivers as you suggested but no luck. Also tried reinstalling sdk. Debugging is on, Java is installed, I'm out of ideas for the moment.
Click to expand...
Click to collapse
Del everything...restart your pc, and download the drivers and sdk..it'll take a few more mins.
When this happened to me, I restarted my PC and it worked.
astron46 said:
Been trying to root N1(FRG83) without unlocking bootloader. Downloaded android-sdk to c: drive and downloaded usb driver.
When I boot the N1 into fastboot mode and type fastboot from the cmd prompt on the computer it sees the phone and gives me the serial (HT****)
When I try the same thing from ADB (ADB devices) it doesn't recognize the phone. I just get a blank line and go back to the command prompt. I've tried this on 2 machines (1 Vista the other Windows 7) and get the same results.
The frustrating thing is that I actually had the phone recognized with the ADB devices command when I first set it up but got called away from the computer and never had a chance to run the rooting routine.
Anybody out there solved this problem?? All help appreciated.
Thanks.
Click to expand...
Click to collapse
If I recall correctly, adb won't work while the phone is in fastboot mode - and that fact that your fastboot commands work fine indicates that it shouldn't be a driver issue. Make sure you're running the adb commands when your phone is actually booted (at least to recovery).
If the phone is recognized by the computer via usb, but the adb does not see the phone connected, you just may need to simply delete and reinstall the latest USB driver that is offered.
There is actually an issue with Nexus One's where the adb composite interface doesn't work. It seems related to the issue with the broadcom driver and the mac address starting with 38.
See here - http://code.google.com/p/android/issues/detail?id=9437 - for more info.
I have now upgraded to frg83 and it works fine.
codesplice said:
If I recall correctly, adb won't work while the phone is in fastboot mode - and that fact that your fastboot commands work fine indicates that it shouldn't be a driver issue. Make sure you're running the adb commands when your phone is actually booted (at least to recovery).
Click to expand...
Click to collapse
This. If you're running ADB in fastboot, you'll get nowhere.

[Q] ADB Drivers

I'm having issues getting adb and fastboot to work with my kindle fire hd 7in. When I plug it into my computer with a factory cable, my kindle goes into the fastboot screen, but neither adb nor fastboot can find it. One possible reason for this is that my kindle appears in device manager as "Android ADB Interface", not "Android Composite ADB Interface". Everything I can find in many different forums says that it is supposed to appear as "Android Composite ADB Interface". Is this actually a problem? And if so, how can I fix this? I tried uninstalling and reinstalling the drivers multiple times, but it still doesn't connect with adb.
http://forum.xda-developers.com/showthread.php?t=2162986

Kindle not found in adb & stuck

I realize there are dozens of similar threads but none so far has helped. I'll keep looking but in the mean time I thought I would try asking for advice.
I screwed up somehow attempting to root my Kindle HD 7". It was stuck in a loop returning to the "restore factory" screen w/ orange triangle every time. I bought a factory cable and the kindle is now in Fasboot mode.
However, every set of instructions I can find to take the next step of restoring the original firmware requires adb and/or fastboot to recognize the kindle. I cannot figure out how to get that to happen. Both fail to recognize it. I modified my adb_usb.ini file to add the line 0x1949 and I modified
sdk\extras\google\usb_driver\android_winusb.inf file to have the required hardware ids for the kindle (I tried the "stock" ids as well as the ids currently listed for the tablet in device manager). I added the sdk paths to my environmental variables. adb & fastboot commands work but neither finds the kindle.
Windows Vista is recognizing the kindle HD as Other Devices > Tate-PVT-08 but fails to load any drivers when it is first found (I get an error).
Any ideas?
Edit/update: I found a thread explaining how to force Windows to change the drivers. I forced it to change to the Android Sooner Composite ADB Driver and it is now listed as an ADB Interface device. still not recognized in adb though.
Another thing is that I am unable to update the drivers to use the adb kindle drivers. Windows simply reports that it "could not find driver software for your device".
Try the drivers in my SIG, they might do what yours already did though and not show up, but they should work if you update the driver to them. I am not a fan of vista, but I can think of several reason why u could be having issues offhand, like uac or driver signature enforcement, I believe driver signature enforcement was on vista, not positive though. Anyways try out my drivers and if that doesn't work maybe the command prompt isn't running with admin privis.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Your drivers were recognized and installed by Vista! Windows now sees it as an Android Phone > Android ADB Interface. Still no luck getting adb to find the kindle though. I think next I'm going to try deleting/uninstalling adb & the sdk and starting again. It isn't spelled out anywhere but I half suspect the paths are wrong somehow.
I can update to Windows 7 if there is any chance that would help.
Thanks for your help!
Michael
stunts513 said:
Try the drivers in my SIG, they might do what yours already did though and not show up, but they should work if you update the driver to them. I am not a fan of vista, but I can think of several reason why u could be having issues offhand, like uac or driver signature enforcement, I believe driver signature enforcement was on vista, not positive though. Anyways try out my drivers and if that doesn't work maybe the command prompt isn't running with admin privis.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Your device is listed as a Tate device correct? That is not going to work with adb because that means it is in fastboot. You can't use adb commands with fastboot. Try running "fastboot -i 0x1949 getvar product" and see if it reports anything back.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Yes, if I uninstall the device and let Windows Vista find it, it is listed as a Tate device. My kindle is indeed in fastboot (I have a factory cable). If I manually force it to switch drivers I can have windows list it as a ADB interface device.
Ahh, I tried fastboot -i 0x1949 getvar product and I get a response from the kindle!
So...I guess on to the next step! One of these 40 tabs I have open probably has something on flashing the rom.
Thanks all!
Michael
stunts513 said:
Your device is listed as a Tate device correct? That is not going to work with adb because that means it is in fastboot. You can't use adb commands with fastboot. Try running "fastboot -i 0x1949 getvar product" and see if it reports anything back.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
MichaelBrock said:
I realize there are dozens of similar threads but none so far has helped. I'll keep looking but in the mean time I thought I would try asking for advice.
I screwed up somehow attempting to root my Kindle HD 7". It was stuck in a loop returning to the "restore factory" screen w/ orange triangle every time.
Click to expand...
Click to collapse
I know this is an old thread, but it seems to be the one most relevant to my problem.
I've got pretty much the same issue, but its because i was trying to install chainfire on my rooted kindle fire hd 7 (tate). Installation was taking longer than expected, actually thought my kindle had frozen so did a hard reset....big mistake as now it doesn't load past the kindle fire logo screen.
I bought a factory cable and the kindle is now in Fasboot mode.
Click to expand...
Click to collapse
Done the same, but when in fastboot, nothing.
However, every set of instructions I can find to take the next step of restoring the original firmware requires adb and/or fastboot to recognize the kindle. I cannot figure out how to get that to happen. Both fail to recognize it. I modified my adb_usb.ini file to add the line 0x1949 and I modified
sdk\extras\google\usb_driver\android_winusb.inf file to have the required hardware ids for the kindle (I tried the "stock" ids as well as the ids currently listed for the tablet in device manager). I added the sdk paths to my environmental variables. adb & fastboot commands work but neither finds the kindle.
Windows Vista is recognizing the kindle HD as Other Devices > Tate-PVT-08 but fails to load any drivers when it is first found (I get an error).
Any ideas?
Click to expand...
Click to collapse
This is pretty much where i'm at now, except on a windows 8 laptop, tried uninstalling everything related to my kindle, all adb, fastboot and sdk etc from my laptop before reinstalling and trying to update drivers but still not being recognised, did all the same things as above post, as been trying to sort this off and on for a while.
stunts513 said:
Try the drivers in my SIG, they might do what yours already did though and not show up, but they should work if you update the driver to them. I am not a fan of vista, but I can think of several reason why u could be having issues offhand, like uac or driver signature enforcement, I believe driver signature enforcement was on vista, not positive though. Anyways try out my drivers and if that doesn't work maybe the command prompt isn't running with admin privis.
Click to expand...
Click to collapse
I've tried to install the drivers from your sig but keep getting the message "the hash for this file is not present in the specified catalog file, the file is likely corrupt or been the victim of tampering" so i'm at a bit of a stand still at the minute.
stunts513 said:
Your device is listed as a Tate device correct? That is not going to work with adb because that means it is in fastboot. You can't use adb commands with fastboot. Try running "fastboot -i 0x1949 getvar product" and see if it reports anything back.
Click to expand...
Click to collapse
Any command i try use through fastboot just gives the <waiting for device> message with no response from my kindle. If either of you (or anyone else who reads this) can help it would be greatly appreciated.
EDIT: Got it recognised by windows finally, I opened "device manager", clicked "update driver software", "browse my computer for driver software" then "let me pick from a list of device drivers on my computer" where i found the right driver to enable fastboot to work and windows to recognise my tablet. Now to fix the damn thing.
Having same issue where my kindle isn't found in fastboot for some reason. When I type
Code:
fastboot -i 0x1949 getvar product
I get back Tate-PVT-08, but when i do fastboot devices I get nothing. I have Andoid ADB drivers installed and a factory cable. What is the problem?
Edit: Turns out i had to paste this in before everything -i 0x1949.
I'm glad this is a current topic again. I also need help. I've been running my rooted Kindle Fire HD 3d Gen going on two years now. I was using the firerooter to get it updated to 4.5.5 today and I'm pretty sure I bricked it--again. But this time I think I bricked it up real good.
I was doing this to hopefully get a recently updated game working again. But when it got hung up I freaked out for a second and made a mistake... I went ahead with a factory reset but then I realized that this would delete my game progress and I hadn't made a game backup before the update came on today so I was pretty much screwed in several ways.
Right, so when I was in the middle of the factory reset I was like... "****! I don't want to lose all my game progress!" and I immediately powered it down. And I immediately punched myself in the face after I turned it on and it did the lovely "kindle_fire" grey-scale initial load screen loop over and over. Based on what I've read, I'm pretty sure I've corrupted the bootloader or possibly deleted some boot partition.
I'm about sick of Amazon's bull****. They don't manager this part of their business very well at all. /RAGE
But before I throw this garbage in the dump where it belongs... I'm tempted to try to get this thing working.
I have a fastboot cable and some time. I can get to the fastboot info such as "fastboot -i 0x1949 getvar product" and it returns "product: Soho-PVT-Prod-07" . But, I can't get anything out of the adb commands to recognize the device. I've updated the .ini files from the android SDK.
Is there any boot partition I can load to this thing? Some way to hack into this? thx for any help

I'm stuck! Is a factory cable required?

I spent about 6 hours yesterday trying to root my Kindle Fire HD 7" tablet using various methods. I've searched numerous posts and tried several ways with no success.
I believe my ADB drivers are working properly because I am able to reboot the tablet from adb successfully. And in the Windows Device Manager it shows the "Android Composite ADB Interface" as my driver. But the command "adb reboot bootloader" just reboots back into the standard Home screen. And any fastboot command just gives me the "waiting for device" response.
I am on Version 7.4.8 of the firmware so I am trying to find a way to downgrade. I purchased it in November 2012 so it is the 2012 tablet. But every method I try just fails for one reason or another. So my question is, do I need a factory cable in order to get anywhere with this? Is it even doable with this version firmware?
Thank you in advance.
It is doable without a factory cable, the known rooting utilities people typically use are kindle fire first aid or binary's root. If you still can't get it to root, you can technically use a fastboot cable and kffa to restore it to a earlier is that os pre-rooted.
Sent from my Amazon Kindle Fire HD using Tapatalk
pastorbob62 said:
I spent about 6 hours yesterday trying to root my Kindle Fire HD 7" tablet using various methods. I've searched numerous posts and tried several ways with no success.
I believe my ADB drivers are working properly because I am able to reboot the tablet from adb successfully. And in the Windows Device Manager it shows the "Android Composite ADB Interface" as my driver. But the command "adb reboot bootloader" just reboots back into the standard Home screen. And any fastboot command just gives me the "waiting for device" response.
I am on Version 7.4.8 of the firmware so I am trying to find a way to downgrade. I purchased it in November 2012 so it is the 2012 tablet. But every method I try just fails for one reason or another. So my question is, do I need a factory cable in order to get anywhere with this? Is it even doable with this version firmware?
Thank you in advance.
Click to expand...
Click to collapse
First thing you need to do is download the SDK package and set the paths correctly. Here is a video guide https://www.youtube.com/watch?v=oaNM-lt_aHw
Once the paths are set then you go to where your tools folder is and hold shift and right click on your mouse and left click on "open command window here." Then type "adb devices" and enter. When you get a device number you will have proof your ADB is working correct. The fact you see it in your device manager is a pretty good sign though.
The command you are looking for is (must be rooted to use this command otherwise you do need a factory cord.)
adb shell su -c reboot bootloader
This is the command to check the whether fastboot is working
fastboot -i 0x1949 getvar product
This is the command to get you out of fastboot.
fastboot -i 0x1949 reboot
No fastboot commands will work until you download the SDK package and set the environment up. You should be able to get into the bootloader though.
LinearEquation said:
First thing you need to do is download the SDK package and set the paths correctly. Here is a video guide https://www.youtube.com/watch?v=oaNM-lt_aHw
Once the paths are set then you go to where your tools folder is and hold shift and right click on your mouse and left click on "open command window here." Then type "adb devices" and enter. When you get a device number you will have proof your ADB is working correct. The fact you see it in your device manager is a pretty good sign though.
The command you are looking for is (must be rooted to use this command otherwise you do need a factory cord.)
adb shell su -c reboot bootloader
This is the command to check the whether fastboot is working
fastboot -i 0x1949 getvar product
This is the command to get you out of fastboot.
fastboot -i 0x1949 reboot
No fastboot commands will work until you download the SDK package and set the environment up. You should be able to get into the bootloader though.
Click to expand...
Click to collapse
I appreciate your reply and information very much. However, I downloaded the SDK package and installed it over a year ago and have used Fastboot for three other devices numerous times. I used Fastboot with my Asus TF300T to flash recoveries, and return to Asus Stock on more occasions than I can count. I am currently running CROMBi-kk 20140323 on that same tablet. Just to be certain, I connected it just now as I am typing this and verified several Fastboot commands. I also have a Huawei U8800-51 and a Samsung S4 Mini Duo GT-I9192 and have used Fastboot commands with them as well.
So I don't think it is an issue with the driver not being installed correctly, or the SDK not being present unless it is a version specific issue. But the Samsung phone is much newer than the Kindle so I don't think it is that either.
So I guess that puts me at an impasse until I get a factory cable. Or I can just forget customizing the Kindle.
pastorbob62 said:
I appreciate your reply and information very much. However, I downloaded the SDK package and installed it over a year ago and have used Fastboot for three other devices numerous times. I used Fastboot with my Asus TF300T to flash recoveries, and return to Asus Stock on more occasions than I can count. I am currently running CROMBi-kk 20140323 on that same tablet. Just to be certain, I connected it just now as I am typing this and verified several Fastboot commands. I also have a Huawei U8800-51 and a Samsung S4 Mini Duo GT-I9192 and have used Fastboot commands with them as well.
So I don't think it is an issue with the driver not being installed correctly, or the SDK not being present unless it is a version specific issue. But the Samsung phone is much newer than the Kindle so I don't think it is that either.
So I guess that puts me at an impasse until I get a factory cable. Or I can just forget customizing the Kindle.
Click to expand...
Click to collapse
You said you were using simply adb reboot bootloader right? Did you try the command I suggested? "adb shell su -c reboot bootloader" because if everything is set up right then this should work. CD from the tools folder.
LinearEquation said:
You said you were using simply adb reboot bootloader right? Did you try the command I suggested? "adb shell su -c reboot bootloader" because if everything is set up right then this should work. CD from the tools folder.
Click to expand...
Click to collapse
Okay, got it working. Not sure what the problem was but I reinstalled SDK-Tools and Platform-Tools using the latest version of SDK. I was then able to use KFFA to root the Kindle and do a full backup. Not sure why it didn't work before the reinstall since I used ADB and Fastboot with my TF300T as recently as a week and a half ago while testing CROMBi-kk. Also verified they still worked with that tablet yesterday. Whatever the problem, it was specific to the Kindle.
One more question. Is it necessary to downgrade from 7.4.8 before installing a second bootloader and custom ROM? Or is that just a precautionary step because some people have had issues.
pastorbob62 said:
Okay, got it working. Not sure what the problem was but I reinstalled SDK-Tools and Platform-Tools using the latest version of SDK. I was then able to use KFFA to root the Kindle and do a full backup. Not sure why it didn't work before the reinstall since I used ADB and Fastboot with my TF300T as recently as a week and a half ago while testing CROMBi-kk. Also verified they still worked with that tablet yesterday. Whatever the problem, it was specific to the Kindle.
One more question. Is it necessary to downgrade from 7.4.8 before installing a second bootloader and custom ROM? Or is that just a precautionary step because some people have had issues.
Click to expand...
Click to collapse
Its kinda just a precautionary measure, to put it plainly, your kindle will bootloop into recovery if you do the process on 7.4.8, so unless you know how to use "Adb push" its suggested to put the rom and gapps onto the kindle ahead of time so it will be there when you start to bootloop into recovery. On another note, you do need to downgrade the bootloader though, if you use hashcodes method, please check the md5sum on the bootloader file before flashing it to avoid a hardbrick. If you used the fireflash method i wouldnt worry about it, just make sure you check off the downgrade bootloader button above or beside the red warning text.
I had these same issues. The device wouldn't boot into fastboot while it was <waiting for device>.
I did this.
1. Used Many Root Tool to gain root. http://forum.xda-developers.com/showthread.php?t=1886460
2. Placed the Rom and Gapps file on my sd card to be safe.
3. Used Anonymous.123's Tool up until the fastboot <waiting for device> malfunction. http://forum.xda-developers.com/showthread.php?t=2685414
4. Opened the Batch File for the Flasher Tool and copied and pasted the fastboot commands into a terminal with the Kindle in Fastboot. The only way I could get it in fastboot was "adb shell su -c reboot bootloader"
This will install the 4.2 bootloader so you don't have to flash back.
5. Profit 2nd Bootloader and TWRP
Good luck. You'll get it.
Sorry I Keep using the quote reply wrong. Havn't been on XDA in a while.
Okay, following Hashcode's procedure, I have successfully completed all steps up to flashing CM 10.2. TWRP works great and I made a backup from it. Not really necessary since I had backed up my Kindle three different ways and also copied all of my data to my PC as well.
But when I went to copy the TWRP backup to my PC for safekeeping I discovered that now I no longer have access to my Kindle from my PC's file explorer when I am booted into my Kindle. Prior to doing any of the steps here I could swap files back and forth without any problem. So how do I get that feature back??
I am running WIndows 8.1. This worked before I followed the procedures here. Also, when I pull files in adb where do they get stored??? Can't seem to find them.
Check the storage settings in CM you have to turn MTP storage in.
Sent from my Galaxy Nexus using xda app-developers app

can't install drivers on win7 or win10

i've tried all suggestions to install the drivers and when i connect my fire to my computer, it shows up as portable device > fire. if i try to update drivers, it says that i am already using the best one, the MTP usb device.
i've followed this:
http://forum.xda-developers.com/showpost.php?p=63072252&postcount=2
and also tried the drivers from amazon and neither allow me to select the adb driver.
You have turned adb on on the Fire?
Pond-life said:
You have turned adb on on the Fire?
Click to expand...
Click to collapse
thanks for the reply.
yes, i put it in dev mode by tapping the serial numbers and it is adb enabled.
ultraman69 said:
and also tried the drivers from amazon and neither allow me to select the adb driver.
Click to expand...
Click to collapse
What error message from windows are you getting when you select the ADB driver in device manager?
For Windows 10 in case it's an unsigned driver issue.
Post #84 linux VM solution if your absolutely hitting a wall.
i cannot select the adb drivers, when i try to manually select it, by going the the folder and clicking install, windows says i already have the best drivers installed. if i try to right click and install the inf, it says it is invalid for my computer.
i also have a macbook that i can try this on, are there instruction for a mac?
i'll take a look at the vm thing, but i have no idea about vm's.
thanks.
thekrakah said:
What error message from windows are you getting when you select the ADB driver in device manager?
For Windows 10 in case it's an unsigned driver issue.
Post #84 linux VM solution if your absolutely hitting a wall.
Click to expand...
Click to collapse
ultraman69 said:
i cannot select the adb drivers, when i try to manually select it, by going the the folder and clicking install, windows says i already have the best drivers installed. if i try to right click and install the inf, it says it is invalid for my computer.
i also have a macbook that i can try this on, are there instruction for a mac?
i'll take a look at the vm thing, but i have no idea about vm's.
thanks.
Click to expand...
Click to collapse
From the images you posted it looks like you should be able to at least poll your device using the windows version of adb, and start rooting. I'll presume you already have adb installed somewhere on your system, "c:\adb", or something like that.
You should be able to poll your Fire device serial number.
Open a command prompt as administrator, goto your adb directory. On the command line type the following.
adb start-server
adb devices
adb kill-server
On your fire device you should see a popup asking you to approve the USB connecting from xxxxxxx hardware id when you try to poll it.
If you get this far you can proceed with the root process for whichever version of Fire OS 5.x.x you have.
i tried that and polling comes up with nothing. after running adb devices, there is no popup on the fire and it lists nothing.
thekrakah said:
From the images you posted it looks like you should be able to at least poll your device using the windows version of adb, and start rooting. I'll presume you already have adb installed somewhere on your system, "c:\adb", or something like that.
You should be able to poll your Fire device serial number.
Open a command prompt as administrator, goto your adb directory. On the command line type the following.
adb start-server
adb devices
adb kill-server
On your fire device you should see a popup asking you to approve the USB connecting from xxxxxxx hardware id when you try to poll it.
If you get this far you can proceed with the root process for whichever version of Fire OS 5.x.x you have.
Click to expand...
Click to collapse
for some reason, on only one out 4 of my win 10 rigs, i had to turn off driver signature enforcement. to do this go to settings, update and security, recovery, advanced startup, restart now. then in the restart menu push, troubleshoot, advanced options, startup settings, then restart. when booted choose "Disable driver signature enforcement" (which is option 7 on current build). now try to install the drivers. after successful just do a normal restart to enable the signature enforcement again
ultraman69 said:
i tried that and polling comes up with nothing. after running adb devices, there is no popup on the fire and it lists nothing.
Click to expand...
Click to collapse
Can you verify that, "android debug" mode is turned on in the Fire devices developer settings? At least that was the only way I could reproduce the same message output from "adb devices".
I faut with my win 7 laptop for about an hour with one of my fires. Has the yellow icon on unknown device. Ended up "update driver" "browse for file" "let me choose from a list" picked Android/adb composite device. Adb and fast boot now work. I originally had to install Android studio and some extras to get my first fire to link up. Pm if you need help.
Sent from my Nexus 6P using Tapatalk
I recommend RootJunky tool, does everything and gives you instructions what to dohttp://www.rootjunky.com/amazon-fire-5th-gen-supertool/ Also recommend watching all his videos https://www.youtube.com/watch?v=sVv1D_LNLTg&feature=youtu.be

Categories

Resources