Database Develop

[Help] My o2x doenst boot, keep rebooting

Well, my o2x keeps rebooting, and stucking on boot.. i tryied flash v10b with nvflash and v20l with smartflash and its keep rebooting.. the phone doenst boot, i cant get into home screen.. anyone knows what can be? how i can fix it?
Thx

Have you come from a custom ROM before flashing v10b? If you have then you will probably have to use Paul obriens backtoext3 which is just flashed in cwm.
If its not then that's as far as my helpfulness can go...

Fulwood Sedge said:
Have you come from a custom ROM before flashing v10b? If you have then you will probably have to use Paul obriens backtoext3 which is just flashed in cwm.
If its not then that's as far as my helpfulness can go...
Click to expand...
Click to collapse
i was on modaco, then i restore back the original backup with cwm.
after i tryied install v20l, phone doesnt boot, then i tryied v10b and phone doesnt boot..
now i cant install CWM since the android system doesnt up.. any other idea? maybe a backtoext3 without cwm?

You should still be able to get cwm even in a boot loop. Keep holding power and volume down until you get to it and then flash backtoext3.
Was it boot looping after you restored your original. If it was then you might only be able to nv flash an original rom.
If it wasn't then you should be able to get to recovery and flash backtoext3

JackStow said:
i was on modaco, then i restore back the original backup with cwm.
after i tryied install v20l, phone doesnt boot, then i tryied v10b and phone doesnt boot..
now i cant install CWM since the android system doesnt up.. any other idea? maybe a backtoext3 without cwm?
Click to expand...
Click to collapse
Install CWM via NVFLash. Follow the first 3 steps of this guide to install it.
Fulwood Sedge said:
You should still be able to get cwm even in a boot loop. Keep holding power and volume down until you get to it and then flash backtoext3.
Click to expand...
Click to collapse
No. He said he smartflashed 20L, which means CWM has been overwritten with the stock recovery. All this will achieve is a wipe.

Fulwood Sedge said:
Have you come from a custom ROM before flashing v10b? If you have then you will probably have to use Paul obriens backtoext3 which is just flashed in cwm.
If its not then that's as far as my helpfulness can go...
Click to expand...
Click to collapse
TrymHansen said:
Install CWM via NVFLash. Follow the first 3 steps of this guide to install it.
No. He said he smartflashed 20L, which means CWM has been overwritten with the stock recovery. All this will achieve is a wipe.
Click to expand...
Click to collapse
thx guys, i will try it
but, if i smartflashed 20L, it doesnt means that the partitions back to ext3 too?

JackStow said:
thx guys, i will try it
but, if i smartflashed 20L, it doesnt means that the partitions back to ext3 too?
Click to expand...
Click to collapse
Yes, it does. I suggested you install CWM so you can restore a backup or flash a new one.
Both of the flashing procedures (NVFlash, Smartflash) should have restored your phone to a working state no matter what, so either your phone is faulty, or your USB-connection is flaky, lets hope its the last. (I assume you have read how, and most importantly, how not to connect USB when flashing.)
So run back2ext3, install a ROM and see if that works.

TrymHansen said:
Yes, it does. I suggested you install CWM so you can restore a backup or flash a new one.
Both of the flashing procedures (NVFlash, Smartflash) should have restored your phone to a working state no matter what, so either your phone is faulty, or your USB-connection is flaky, lets hope its the last. (I assume you have read how, and most importantly, how not to connect USB when flashing.)
So run back2ext3, install a ROM and see if that works.
Click to expand...
Click to collapse
do u suggest me install a ROM original or a custom rom?
and what u mean with how not to connect usb when flashing?

JackStow said:
do u suggest me install a ROM original or a custom rom?
Click to expand...
Click to collapse
To verify your phone isn't broken, first install an original ROM.
and what u mean with how not to connect usb when flashing?
Click to expand...
Click to collapse
Primarily it was a hint to go search and read about how to flash before you flash. But since you ask:
Do not connect to USB via a hub, always connect directly to the computer. When something doesn't work, try a different cable. Do not use an overclocked computer to flash. etc. etc. etc.

TrymHansen said:
To verify your phone isn't broken, first install an original ROM.
Primarily it was a hint to go search and read about how to flash before you flash. But since you ask:
Do not connect to USB via a hub, always connect directly to the computer. When something doesn't work, try a different cable. Do not use an overclocked computer to flash. etc. etc. etc.
Click to expand...
Click to collapse
well, iv installed cwm, then install backtoext3, then flashed v10b via nvflash, and phone still in boot loop :S
god damm ;/

JackStow said:
well, iv installed cwm, then install backtoext3, then flashed v10b via nvflash, and phone still in boot loop :S
god damm ;/
Click to expand...
Click to collapse
Try to flash a rom or restore a backup via CWM. Doing the same thing over and over is not likely to help.
Download one of these: http://forum.xda-developers.com/showthread.php?t=1328656
Put it on your sdcard.
Install CWM via NVFLash. (If not already there.)
Start CWM.
Wipe/Factory reset.
Flash it.

TrymHansen said:
Try to flash a rom or restore a backup via CWM. Doing the same thing over and over is not likely to help.
Download one of these: http://forum.xda-developers.com/showthread.php?t=1328656
Put it on your sdcard.
Install CWM via NVFLash. (If not already there.)
Start CWM.
Flash it.
Click to expand...
Click to collapse
i will try, but now im at work, i cant donwload 200mb >.>
but i will try later, then i post the results here.. very very thx man..

i just doind another tryes, but sometimes the phone stuck even in CWM menu..

[Solved] Recovery 5.0.2.6 samurai..........

Ive got a stock 2.2? froyo captivate and did the new [Guide] How To flash Captivate ROMs from Stock by TRusselo and when i go into recovery i cant access external sd. I put the latest nightly and gapps on the root of sd card and for some reason I cant see it? I did a clean wipe and everything. Is there something wrong that I'm doing. I've mounted everything and still nothing.

Read the instructions again INTERNAL SD not EXTERNAL and you can access it, browse sdcard to /external_sd folder, it takes you to your external sd.
you mounted what? why? dont.
BUT YOU CANT FLASH FROM EXTERNAL SD!!!!
thats why the instructions say INTERAL SD

So instead of downloading through the browser.....I'd like to move the new nightly and gapps on internal memory with a pc transfer....where would i put it in? so that CWM can see it? Thxs man. I appreciate it. noober here. htc aria was a breeze to root and flash custom roms, I'm not use to this puppy.

ANYWHERE internal sd in the root, or any folder (except external_sd)
what browser are you using? the stock brower downloads to sdcard/downloads not sdcard/external_sd/*whatever*
if you downloaded with stock browser it should be there... not in root. unless you moved it after.

Thanks so much..... I found the files I needed but when I try to flash nightly it gives me this craziness....what's going on! Thxs for the help though.
edit: Did a factory one click by odin.

seems like an error with the zip file. try a nightly from a day or two before.

The build prop doesn't match the built asserts in the Zip, they have to match for it to flash... what ROM are you currently on?
Sent from my I897 using xda premium

that would make scene by the error. hmm he said he went to stock odin one click...
which odin one click?

Maybe he just did that...
Sent from my I897 using xda premium

So I did the one click to revert back to stock. Then I did a one click root and now have SU. 10 hours later and a freakin home made jig that I've made i'm still on 2.1 with root. Please for the love of God I'd like to install current nightly of cm7 and CWM. There are soooooo many ways I've read to install. Now from you pro's can you hook me up with some links or direction to get this going. I've literally killed my Saturday reading my a$$ off. Thanks guys for replying to my lame noobness.

tommyguns818 said:
So I did the one click to revert back to stock. Then I did a one click root and now have SU. 10 hours later and a freakin home made jig that I've made i'm still on 2.1 with root. Please for the love of God I'd like to install current nightly of cm7 and CWM. There are soooooo many ways I've read to install. Now from you pro's can you hook me up with some links or direction to get this going. I've literally killed my Saturday reading my a$$ off. Thanks guys for replying to my lame noobness.
Click to expand...
Click to collapse
Just clear ROM managers data and then flash the original Captivate CWM not MTD and the reboot into recovery... reinstall packages 2 times, and flash in CWM
Sent from my I897 using xda premium

Thanks for the fast reply. I bought ROM manager premium and will try it out. Install twice I guess to be on the safe side right? Thanks again. My wife hates my life right now being i've spent all day doing this. So i'm down to try anything on her cappy at this point.

Not "to be on the safe side"...the first time you choose reinstall packages in stock recovery it'll boot back into stock recovery, then reinstall packages again and it'll boot into cwm.

yeah thats a must do.

So i've cleared cache and selecting captivate recovery galaxy s 2.5.1.x booted into recovery ROM manger and did reinstall twice and got this.......I don't understand why i'm getting this.
Edit: I got it to work! I kept trying to go through the recovery from ROM manager after installing and it hung up a couple times. Then when selecting install packages with which I did it twice...it was in cwm 2.5.1.7. Installed nightly after full wipe a couple times and it boot looped. Then if I remember correctly I pulled battery booting into recovery, the 3 button way. it booted into Cwm 5.x.x.x. What the heck!!! That was a fun ride, why did it do this? Anyways, glad to join your guys community. you guys are awesome. Thanks buttons hit. changing first post and thread to.....solved.

When you flashed the nightly it contained a kernel with cwm 5 baked into it.

from what i have heard sometimes the cm install needs to be done twice.. too. i dunno dont mess with cm7

Sorry
Hello Guys, Just Found this thread after messing up with my Galaxy S Captivate :| I Unintentionally copied my rom in EXTERNAL SD card and Proceeded further but when I got in Download mode I can't Locate my Rom Zip and I tried Everything as mentioned such as wipe & etc... but Now My Phone is Stuck on Samsung Screen and Can't go through that screen! Is there anyway I can move back to stock rom and then update with new Hellybean!
thanks in Advance!

ShahX said:
Hello Guys, Just Found this thread after messing up with my Galaxy S Captivate :| I Unintentionally copied my rom in EXTERNAL SD card and Proceeded further but when I got in Download mode I can't Locate my Rom Zip and I tried Everything as mentioned such as wipe & etc... but Now My Phone is Stuck on Samsung Screen and Can't go through that screen! Is there anyway I can move back to stock rom and then update with new Hellybean!
thanks in Advance!
Click to expand...
Click to collapse
Go in the Dev section (stickies) and get Odin KK4 without bootloaders. Flash it in download mode.
From there, Get Corn kernel, which you'll flash with Odin 1.85 and finally, you can get back to your ROM.

BWolf56 said:
Go in the Dev section (stickies) and get Odin KK4 without bootloaders. Flash it in download mode.
From there, Get Corn kernel, which you'll flash with Odin 1.85 and finally, you can get back to your ROM.
Click to expand...
Click to collapse
Thankyou Soo Much For your Reply Bro, But Can you please guide me in detail like what Exactly Should I do with My Phone, I can Use my phone its wont let me boot into menu I just stuck on Samsung logo, and As TRusselo Guided in his tutorial I have to put any ROM.Zip into INTERNAL SDCARD (Phone Memory) and I can't do that until my phone boot's up properly! right? so Can you please help me out like what Should I do to get it working and THEN trying again to Update it with Hellybean
Once Again thankyou for your kind Reply!

[Q] Stuck Loading After Format

Hello, everyone. My first post, so I'll try not to make it terrible and try to keep it short. I've just stepped into the world of Android from using an iPhone. Currently using an SGH-i897. I rooted my phone, unlocked and went to install a custom Jelly Bean. I wiped data/factory, cache partition, dalvik cache and then did Format/system in Recovery mode. At this point I realized I made two really dumb mistakes. I hadn't installed ClockworkMod Recovery. I also didn't put my files on the Internal SD as I was supposed to, be on my external SD instead. I chose to reboot system so I could get back to my main system and fix what I'd done so I could continue properly. Welp, now I'm stuck at "system Corps" with the corn fella. The bar will finish loading, then just stays with corn alien. I can still get into Recovery if I want, but I'm not sure where to take it from here. I've read a few posts from people with different phones and it sounds like they have to flash official firmware with Odin or something?
Thank you for any help that can be offered.
*EDIT*
Finally got phone into Download mode again. I feel this is where I need to be heading, but I'm not sure what to do at this point.

If u can use the button combo to reboot into Recovery, u can go to mounts and storage and mount usb and connect to ur pc and copy ur rom over to ur phone's internal sdcard. And since u have the Corn Kernel installed...u have CWM Recovery. (Don't use Rom Manager).
If u cannot get into Recovery Mode, then get into Download mode and start over.
Take ur time, read, read, and be sure u know what ur doing. There r a lot of Stickied threads that contain a wealth of info. :good:

4-2ndtwin said:
If u can use the button combo to reboot into Recovery, u can go to mounts and storage and mount usb and connect to ur pc and copy ur rom over to ur phone's internal sdcard. And since u have the Corn Kernel installed...u have CWM Recovery. (Don't use Rom Manager).
If u cannot get into Recovery Mode, then get into Download mode and start over.
Take ur time, read, read, and be sure u know what ur doing. There r a lot of Stickied threads that contain a wealth of info. :good:
Click to expand...
Click to collapse
There are indeed, and I hate being that noob that asks anyway. It doesn't help I've been stuck home today with the flu, which together with this situation is really testing my patience. I think I just needed the support and someone hinting in some way, shape or form as you have that I'm not completely boned. I'll continue plugging away and see what comes out of it. Thank you much!

Try to install one click stock 2.1 ROM.. Google it, you vl find the Rom. Double click on one click odin after downloading, connect your phone to computer. Get your phone into download mode, click on start in odin. Tatz it. Stock Rom vl b installed

tkharishreddy said:
Try to install one click stock 2.1 ROM.. Google it, you vl find the Rom. Double click on one click odin after downloading, connect your phone to computer. Get your phone into download mode, click on start in odin. Tatz it. Stock Rom vl b installed
Click to expand...
Click to collapse
OP - Don't do this.. If you flash back to stock, flash Odin KK4 without bootloaders (as you're already on GB).

[Q] About Root Problems

Hello fellas. I know you don't like these kind of posts and I agree you're right but I'm completely lost. That's why i'm making this post.
I just installed official 4.1.2 stock rom and it says N7000WELSA rom.
I want to root this. I used "PhilZ-cwm6-UBLSF-UBB-4.87.6" kernel to root that. But after i flashed that nothing happened. Can you guys give me a light on the topic? I'm really new to that stuff and can't see my way out here... Thank you !

How did you flash it? Zip from stock recovery?

nokiamodeln91 said:
How did you flash it? Zip from stock recovery?
Click to expand...
Click to collapse
Well i downloaded the file "N7000UBLSF_N7000UUBLSF_N7000WELSA_HOME.tar" from Hotfile. And put it in PDA in Odin3 v1.85 and flashed it. I'm writing down every detail because i may have done something wrong.
Then i downloaded "PhilZ-cwm6-UBLSF-UBB-4.87.6.tar" and flashed it the same way.
http://www.ibtimes.com/android-412-jelly-bean-ublsf-official-firmware-update-samsung-galaxy-note-gt-n7000-how-install-it
http://www.ibtimes.com/how-root-android-412-jelly-bean-ublsf-samsung-galaxy-note-gt-n7000-tutorial-1128991
I used the above tutorials to do so.

If you have used odin to install philz kernel, it will not root. You need to flash the zip version. Or use the supersu.zip file from the following post.
http://forum.xda-developers.com/showthread.php?t=1329360
You should now have Cwm recovery. So either flash a zip version of philz kernel or supersu
To get into recovery, use Vol up + power + home

Morfildor said:
Well i downloaded the file "N7000UBLSF_N7000UUBLSF_N7000WELSA_HOME.tar" from Hotfile. And put it in PDA in Odin3 v1.85 and flashed it. I'm writing down every detail because i may have done something wrong.
Then i downloaded "PhilZ-cwm6-UBLSF-UBB-4.87.6.tar" and flashed it the same way.
http://www.ibtimes.com/android-412-jelly-bean-ublsf-official-firmware-update-samsung-galaxy-note-gt-n7000-how-install-it
http://www.ibtimes.com/how-root-android-412-jelly-bean-ublsf-samsung-galaxy-note-gt-n7000-tutorial-1128991
I used the above tutorials to do so.
Click to expand...
Click to collapse
As you are using LSA rom, shouldn't you be using the LSA Philz kernel? For the next time, just flash the zip version in stock recovery and you will get all at once. Root + CWM recovery + Safe kernel.

I don't think it's the rom he's mentioning. It s the baseband for new lsz of a different region.

Do i have to have an External SD Card to use this method ?

now no as you should already have cwm since you pushed philz tar

nokiamodeln91 said:
now no as you should already have cwm since you pushed philz tar
Click to expand...
Click to collapse
I'm feeling really stupid. I couldn't do it :/ Couldn't manage to find the right files and do the right things... Can you explain the steps in a way that you explain to a brain-damaged person?

download this http://www.mediafire.com/?nutltlvm694xcce
place on ext or internal sd.. boot into recovery.. choose install zip

Thank you so much. It's done now. Really thanks.

Morfildor said:
Thank you so much. It's done now. Really thanks.
Click to expand...
Click to collapse
My last question; Is there a way to format the phone to a state that is just just unboxed? Empty sd card. No programs. Everything clear. My battery is running out real quick and the phone started to slow down a bit. It kinda laggs... And when i flashed the rom it just upgraded the OS. Everything is still the same. Widgets , apps... they are all staying.

??? i dont fully understand. you want to revert to ICS?

No no. I wanna keep JB. But this flashing just upgraded the OS. No files were deleted or so. I just wanna completely format everything on the phone.

yes cuz its a non wipe rom.. boot into philz recovery and wipe data

Thanks again. It did work out. Well i tried to format usb storage using settings>storage> Format USB Storage. But nothing happens and it doesn't format it. Is there any other way ?

Yah. Connect to pc and delete.

Is it safe to select all and delete via computer ?

yes

[Q] USB not working, just charging. Bricked or damaged by wiping system or data?

Hello guys, you're the only hope to fix this, I'm sure! I'm facing a very annoying issue, (I'm having an old BL) mine USB cable is not working properly (just charges the phone, and nothing more happens, all drivers are up - to-date. Strange bug, happened after few days while being on CM 10.1. I don't know if that is related but while using CM10.1 I used battery calibration app , tried to solve that long charging issue D) after using cm10.1 I have advance-wiped not only cache, dalvik, but also system, data , etc..then moved to 7.2 stable, still got no USB functions, computer just does not see my phone(tried 3 computers using windows 7 32/64 bit,Nvflash is also not seeing the device.) I wonder if someone could help me to fix that mess. Really would like to flash a stock rom, but nothing except charging is working. I forgot to mention that while being on Cm10.1 I used this http://forum.xda-developers.com/showthread.php?t=1800935 to mount storage, also some google mounting apps with no luck. CWM also does not mount mass storage. What could be wrong? Help will be appreciated ! :good:

If your cable is not working properly, only charge your phone, then there is no way to use nvflash, smartflash or cwm to copy rom to your internal sdcard. What you can do is that you buy a new cable or borrow one from your friends or from someone. If you have external sdcard then use a cardreader to copy rom to your phone.

bitdomo said:
If your cable is not working properly, only charge your phone, then there is no way to use nvflash, smartflash or cwm to copy rom to your internal sdcard. What you can do is that you buy a new cable or borrow one from your friends or from someone. If you have external sdcard then use a cardreader to copy rom to your phone.
Click to expand...
Click to collapse
Can somehow i flash a stock rom without nvflash? Or just restore a backup ?

Mindaugas92 said:
Can somehow i flash a stock rom without nvflash? Or just restore a backup ?
Click to expand...
Click to collapse
If you have backup on your phone then restore it, but how do you want to use nvflash or smartfalsh or anyother thing if your cable is broken?

bitdomo said:
If you have backup on your phone then restore it, but how do you want to use nvflash or smartfalsh or anyother thing if your cable is broken?
Click to expand...
Click to collapse
I would like to get a backup of stock ROM to flash via CWM. probably then it will work Nvflash is not working so i should forget about that

Mindaugas92 said:
I would like to get a backup of stock ROM to flash via CWM. probably then it will work Nvflash is not working so i should forget about that
Click to expand...
Click to collapse
Okay, listen. Download team viewer, then send me an email about your teamviewer ID and password to [email protected]
I will be online for 2 hours.

bitdomo said:
Okay, listen. Download team viewer, then send me an email about your teamviewer ID and password to [email protected]
I will be online for 2 hours.
Click to expand...
Click to collapse
These days I'm not in home, i will be on monday evening. Thanks for your help. But i think its a Hardware issue, now i just need somehow to flash a stock and give a phone to a warranty service. Thanks.

Mindaugas92 said:
These days I'm not in home, i will be on monday evening. Thanks for your help. But i think its a Hardware issue, now i just need somehow to flash a stock and give a phone to a warranty service. Thanks.
Click to expand...
Click to collapse
If it is the cable what is broken just simply change to another cable. If it is the usb port itself on your phone then use sdcard to copy rom to your phone. There is no other option

bitdomo said:
If it is the cable what is broken just simply change to another cable. If it is the usb port itself on your phone then use sdcard to copy rom to your phone. There is no other option
Click to expand...
Click to collapse
Its not a cable. So now i need a stock rom backup to copy to my sdcard and restore. Can someone post it?

Mindaugas92 said:
Its not a cable. So now i need a stock rom backup to copy to my sdcard and restore. Can someone post it?
Click to expand...
Click to collapse
just download a rom from the developement section. Choose the correct version for your bootloader

bitdomo said:
just download a rom from the developement section. Choose the correct version for your bootloader
Click to expand...
Click to collapse
But I cant install install fls and bin or kdz file directly from my phone.. Very need a backup of stock lg p990 gingerbread..

Mindaugas92 said:
But I cant install install fls and bin or kdz file directly from my phone.. Very need a backup of stock lg p990 gingerbread..
Click to expand...
Click to collapse
Oh okay okay I got it now.
You were on old bootloader right? If so then I am uploading a backup of gingerbread v20s.
Do you remember what version of rom did you have before you flashed cm? So We could match up the baseband and the rom.
Do you want to replace cwm recovery with stock recovery?
What version of cwm do you have? It is essential to know, because backup formats are differs between cwm versions

bitdomo said:
Oh okay okay I got it now.
You were on old bootloader right? If so then I am uploading a backup of gingerbread v20s.
Do you remember what version of rom did you have before you flashed cm? So We could match up the baseband and the rom.
Do you want to replace cwm recovery with stock recovery?
What version of cwm do you have? It is essential to know, because backup formats are differs between cwm versions
Click to expand...
Click to collapse
Yeah, Im on an old bootloader, because lots of roms use this BL. I flashed Gb V20 d or e, i don't know now, because these days I'm not at home. Tomorrow will be able to look at my computer and tell you the exact version. Probably its v20d.for baltic countries.now just need to backup it, remove Root, clockworkmod and take a phone to warranty. Its the only way to do it. Very change how these chips go out. Confusing . after all, very thank you for your help!
*Okay, I watched the version which was flashed previously CM, it was BIN_LGP990AT-00-V20c-BAL-XXX-MAR-16-2012-0. I'm uploading it to the dropbox, it will take time, because of the DSL upload speed (76 kb/s). Can I ask you to make a backup of this ROM, using CWM 6.0.3.1 with a root? Here's the link, it might be uploaded after 3 or more hours. https://dl.dropboxusercontent.com/u/64768144/BIN_LGP990AT-00-V20c-BAL-XXX-MAR-16-2012-0.zip very thank you if you can !