Database Develop

Help flashing cognition rom

The captivate is my back up phone and id like to jazz it up. Can anyone help me flash this rom? Thanks.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Depends on wich Cognition you want if 4.x.x or 5.x Either way both have instructions on their Dev thread.

prbassplayer said:
Depends on wich Cognition you want if 4.x.x or 5.x Either way both have instructions on their Dev thread.
Click to expand...
Click to collapse
Ill take the new version and i saw some stuff on the dev page but i dont really understand it. On my infuse all i do is download the zip, and install it thru cwm. Not sure if the cap is the same.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

nash2000 said:
Ill take the new version and i saw some stuff on the dev page but i dont really understand it. On my infuse all i do is download the zip, and install it thru cwm. Not sure if the cap is the same.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Well for Cog 5 you will need to flash GB bootloaders. BUT the 3 steps on the OP will work. There some risk when flashing bootloaders, but read up on how to use ODIN and they key combinations, nothing to it =)

I dont know...i looked back on the dev page but i cant download anything since i dont have unknown sources. Ill dig around for a video or something.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

I watch a quick video, i think this is a little out of my leauge.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

I would suggest Flashing Cognition 4.5.3. Its a Froyo based rom but its alot easier to get running runs great easily OC/UV to 1.2ghz I've gotten my phone to 1.4ghz stable (that may vary on your phone)

prbassplayer said:
I would suggest Flashing Cognition 4.5.3. Its a Froyo based rom but its alot easier to get running runs great easily OC/UV to 1.2ghz I've gotten my phone to 1.4ghz stable (that may vary on your phone)
Click to expand...
Click to collapse
Sounds good to me, what is the procedure?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App

nash2000 said:
Sounds good to me, what is the procedure?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
If its stock, then its just getting CWM on that phone and flashing it. To get CWM theres a few ways to do that, simplest would be get a 1 click root from dev (AIO toolkit is very useful) and install Rom Manager from the market install CWM. Move the Cog zip file to your phones Internal SD reboot in recovery (Rom manager has the feature to do that) and flash from SD, look for the cog file.

[ROM][DISCONTINUED]!!PureBlur v1.2-based on the latest HKTW 2.3.4 official update!!

This is my first ROM!
WORKING NOW!!
DO NOT download the ROM UNLESS you know what you are doing!
I am not responsible for any bricked!!
Screenshot gone! (just stock blur UI)
Features:
Brightness hacking down to 5
64M vm heap size
Webtop via HDMI (Thanks zomgno1)
Zipaligned
Deodexed
Rooted
4 points multi-touch with 15 seconds crack
EXT4
faux123's kernel [email protected]
Click to expand...
Click to collapse
Installation guide:
1. press Vol-down while booting and navigate to "Android recovery" Press Vol-up for going into Clockworkmod Recovery (Custom CWM-based Recovery 5.0.2.3-atrix4.1 recommended)
2. BACKUP FIRST!!!
3. Wipe data/factory reset
4. Wipe cache
5. Wipe dalvik cache
6. install the ROM
7. Reboot to enjoy the overclocked Blur!
Click to expand...
Click to collapse
Changelog:
Next update:
---
v1.2
Brightness hacking down to 5
64M vm heap size
Webtop via HDMI
Download update v1.2
v1.1.1
Removed Carrier name from status bar
1% battery mod
Download update v1.1.1
v1.1
Delete DSP manager
Add EXT4 support
multi-touch hack with 15 seconds crack
v1.0
Initial release
Click to expand...
Click to collapse
Known issue(s):
Click to expand...
Click to collapse
Thanks to faux123, Diviance, zomgno1(HDMI hack) and also Motorola
Click to expand...
Click to collapse
For those who suffer from widget problem, please install the stock kernel. Since I don't know if your device compatible with HK stock kernel.
DOWNLOAD (v1.1)
DOWNLOAD WEBTOP

I was about to download the original sbf and deodex it.
You save my time.
Many thanks
Sent from my MB860 using XDA App

Any other goodies you can list?
Special install instructions?
Sent from my MB860 using xda premium

supermerkin said:
Any other goodies you can list?
Special install instructions?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
HKTW got special settings for crystal talk

does your rom suffers from the missing widgets problem every time you shut down and boot up again? i am asking because i tried already homebase and aura which have faux's kernel and both have the same problem... CM7 beta has a kernel that does not have this problem...

So I dl and flashed using the instructions you posted.
I originally had blue cronic installed and it seems like most of the ui from it was still running after reboot. Also all of the apps had a fc issue going on so I had to restore. Should I have to flash back to stock before flashing your rom?
Sent from my MB860 using xda premium

totti123456 said:
does your rom suffers from the missing widgets problem every time you shut down and boot up again? i am asking because i tried already homebase and aura which have faux's kernel and both have the same problem... CM7 beta has a kernel that does not have this problem...
Click to expand...
Click to collapse
I would assume so. The missing widgets problem appears to be linked to faux's kernel, which this has. In faux's thread even people on CM7 that use his kernel experience the widget problem.

supermerkin said:
So I dl and flashed using the instructions you posted.
I originally had blue cronic installed and it seems like most of the ui from it was still running after reboot. Also all of the apps had a fc issue going on so I had to restore. Should I have to flash back to stock before flashing your rom?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
It is no necessary to back to stock.
I had CM7 before. After Wipe data, cache, then install, no problem at all.

Lol did you remove the download link?

I'll try it again. Maybe I'll do a restore shook the way back to after I unlocked and rooted before flashing and see what happens.
Sent from my MB860 using xda premium

So I restored back to stock and cleared/reset everything but still unlocked and reinstalled.
Out got stuck on the dual core boot loader over and over. Pulled the battery and restored again.
What it looked like was happening when I installed was an update and not a full rom? I downloaded the files you had posted, was it the right one at 7:00am this morning est?
Sent from my MB860 using xda premium

supermerkin said:
So I restored back to stock and cleared/reset everything but still unlocked and reinstalled.
Out got stuck on the dual core boot loader over and over. Pulled the battery and restored again.
What it looked like was happening when I installed was an update and not a full rom? I downloaded the files you had posted, was it the right one at 7:00am this morning est?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
So, this is the reason I removed the ROM and now I'm try to make it OK
SORRY!

This rom is probably for ME860
ME860 is china version of Atrix international,
Atrix international should be safe to use,
but not yet confirmed for Atrix 4G (ATT Atrix)

alistair3149 said:
This rom is probably for ME860
ME860 is china version of Atrix international,
Atrix international should be safe to use,
but not yet confirmed for Atrix 4G (ATT Atrix)
Click to expand...
Click to collapse
This is my mistake. I need to figure out why it will stuck on boot.
Sorry for my mistake!!
I will upload the ROM when everything OK.

No worries, at least I'm not bricked. Just post the update and I'll try it again later.
Sent from my MB860 using xda premium

nok07635 said:
This is my mistake. I need to figure out why it will stuck on boot.
Sorry for my mistake!!
I will upload the ROM when everything OK.
Click to expand...
Click to collapse
It is not your fault,
this rom is for ME860,
but Atrix international should be okay

can you release a version with stock kernel? i dont need to overclock, just want a stable deodexed custom rom... thanks!

Boot up success but I am using AURA ROM developer Diviance's updater-script. I must ask his permission to release!
BTW I try to reboot the phone to see if the widgets missing. Honestly, No problem with BlurHome launcher

The widget problem seems to occur at a random time. It took a few days worth of rebooting to happen to me on homebase. After it happened the only permanent fix was to revert to stock kernel.
Sent from my MB860 using Tapatalk

hi.İ want to ask:
which languages are supported your rom?

[Q] Is my Tab dead?

I've been running CM 10.1 on my 7310 for a couple of months - it's slow, but it does the job.
Today it started misbehaving more than usual, so I rebooted. It's spent the afternoon rebooting itself about once every five minutes - freeze and hard reboot (Samsung splash screen). I tried different versions of CM and AOKP to figure out if it was hardware or software, no change.
I wiped it and flashed CM 9 nightlies a couple of hours ago, and got the same behaviour. After some googling I found aLogrec and turned it on. As soon as it boots and tries to start recording the logcat, it hard reboots. I figure the onboard flash storage is borked - is there anything I can do? I can't even get it to boot into Recovery, it just loops forever.
I'm hoping someone out there can give me some ideas before I go out and spend on a Nexus 7..

Have you tried to see what happens if you install official ICS with Odin?
Sent from my GT-P7310 using xda app-developers app

I can't even get into the tab to do anything at this point.

vinfromuk said:
I can't even get into the tab to do anything at this point.
Click to expand...
Click to collapse
You could see if odin still recognize it and fish a stock rom. But by the sound of it I think you're sol.
Sent from my SGH-I727 using xda app-developers app

Odin recognised it and has flashed the right ICS official, but it just sits on a glowing Samsung logo.

Odp: [Q] Is my Tab dead?
I will wipe all data/cache from recovery and see if that works, but I'm not so experienced and you should wait for someone with proper knowledge to give you advice But you just might give it a try

First thing I tried, but thanks for the suggestion

vinfromuk said:
First thing I tried, but thanks for the suggestion
Click to expand...
Click to collapse
Do s factory reset. That'll work.
Sent from my SGH-I727 using xda app-developers app

I just applied the Honeycomb 3.2 shipped image using Odin and it seems to be working. Going to attempt to reapply CWM and flash an ICS build now..

Glad to hear it worked out for you.
Sent from my GT-P7310 using xda app-developers app

It's been stable on the CM10.1 M2 build all day. I don't know why the official 4.0.4 firmware didn't work, but I'm glad I tried 3.2 before giving up.
Thanks again to everyone who offered suggestions.

link
vinfromuk said:
It's been stable on the CM10.1 M2 build all day. I don't know why the official 4.0.4 firmware didn't work, but I'm glad I tried 3.2 before giving up.
Thanks again to everyone who offered suggestions.
Click to expand...
Click to collapse
Be a ninja and paste the link to the rom you used. I've borked my upgrade too. I can get in to loki for oden to send the rom, just need the rom that will work with oden.
Thanks,
R

AnRkey said:
Be a ninja and paste the link to the rom you used. I've borked my upgrade too. I can get in to loki for oden to send the rom, just need the rom that will work with oden.
Thanks,
R
Click to expand...
Click to collapse
You can get the stock firmware from sammobile.com. just register on line, it's free.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

http://samsung-updates.com/device/?id=GT-P7310
I flashed the 4.0.4 from here and it didn't work, so I tried the 3.2 and restored it to shipped state using Odin. After that I rooted and reinstalled CWM with Odin, and then flashed the CM 10.1 M2 build from the Development forum here the usual way (copy to SDcard, reboot recovery).

Good. I should have mentioned you have to start with gingerbread. Could have saved you a step.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

[Q] Experiencing random reboots w/ Semaphore kernel?

I've been running on stock CM10.1 since it was released. But, then, I wanted to try Semaphore. Alas, every time I flash it, after less then 3-4 hours, my SGS starts rebooting. I've tried it on like 10 or 12 different nightlies, starting from January. Any idea what's causing this? Any suggestions?
My specs are: SGS i9000, iNand version, CM10.1 latest nightly.
I must mention that i've even tried leaving Semaphore untouched after flashing, as in not changing any of the default settings. Sill, the same.
I hope you guys can help me out here. Thanks a lot!

I had same Problem only a full wipe solved it . Internal and external SD completly wiped.
Sent from my GT-I9000 using xda premium

Do a full wipe and cache and dalvik try then if not check semaphore settings with manager maybe some weird overclock settings

Already did full wipes w/ fresh install of CM10.1
As for Sema manager, I never did any OC on it.

Maybe your using the wrong kernel version check if your using the right one. S or no s version?
Sent from my GT-I9000 using xda app-developers app

darkknigh_t said:
Maybe your using the wrong kernel version check if your using the right one. S or no s version?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I used the non-S version, that's the one for CM10.1, isn't it?
This is bugging the hell outta me. I've tried 11 nightlies, including the M2 CM10.1. All the same, after no more than a few hours, the random rebooting starts.

Any other ideas?

@PB I've been experiencing the exact same issue with Semaphore for months.
I'm on a different variant (Vibrant), but the outcome is the same.
At this point, I've sort of given up & am chalking it up to something in the kernel (bigmem?) is incompatible with my particular device (kind of like how some phones can OC & remain stable while others of the exact same model cannot).
Did you ever figure out how to get it to play nice on yours? :fingers-crossed:

Cm10.1 Performance booster version 2

CM10.1 Lag Fix version 2​
The first version by me is baked into cm10.1 by epinter already, this is the new one.
This update is made by me and will be baked into cm10.1 (epinter) as soon as he diffs it.
This build prop works okay*for me, but not 100%!
Instructions: To apply the tweaks and scripts to CM/PAC/CARBON etc...
(1. Download the attached file below.
(2. Flash it in Clockworkmod recovery.
(3. Enjoy.
What does this do? Enable both cores on high, free a tad more ram and graphics tweaks through properties and init.d...
VERY Close to fixing 100% of the problem. But I cant get my other source to work.
Download - Codex01-CM10.1PreformanceEnhancements-3.0.1.zip

so does battery life take a hit with both cores enabled?

No, I included more than performance there's now power saving, connection, and media init.d scripts and props.
Sent from my MB886 using xda app-developers app

Thanks thats good to know about to flash now.
Update: I definitely see a performance difference.

I tried it in PAC rom and its running smooth now. I notice that after i flash this, i can't proceed to CMW recovery. Anyone has the same problem? Im planning to back up this.thanks
Sent from my MB886 using xda premium

ryuben2k said:
I tried it in PAC rom and its running smooth now. I notice that after i flash this, i can't proceed to CMW recovery. Anyone has the same problem? Im planning to back up this.thanks
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
Nope i get into CMW.

Is there a way i can recover CMW?
Sent from my MB886 using xda premium

This does make everything a bit smoother. Animation is still kinda herky-jerky but for a ROM that's been around for less than a week developed by a guy who doesn't even own one (epinter says he doesn't have an MB886 available to him), this is super impressive.

Try flashing it again @ryuben2k. What version and which model, from what I hear, the Photon 4G LTE is not a good choice of recovery. Make sure you flash the Razr HD recovery. If all goes well with the millions of init.d scripts I'm writing I'll have version 3 by tomorrow.

Is this specifically for cm10.1 or will it work for PAC rom?
Sent from my MB886 using xda app-developers app

Yes, because PAC is a port into our cm10.1 sources. @worlddominatiin

Appreciate the work your doing looking forward to v3
Sent from my MB886 using xda premium

@Swiftb12305 I'll have it up tonight for sure, something came up and I didn't feel like doing anything.

thanks! im waiting for the v3 too!

Okay might be a while because my Google site page for this got reformatted, and I'm trying to get some other stuff done, this may lead to the early to late am maybe even pm. Because of scripts for not only cm, PAC, and AOKP... But now root box too.... Hope you guys understand.
Sent from my MB886 using xda app-developers app

So later this night or tomorrow night?
No problem... I might be awake to try this out still...
I don't see any reason to not be patient...

No problem btw what will v3 include?

Sorry for my absence and delay of development, it was due to a family emergency. I'm not home right now, I'm using mobile hotspot while I'm in Daytona for a while. Hopefully I can get this project up. Please be patient while I'm syncing my sources now on my laptop.
To answer your question on what this update will contain: It will contain additional scripts in init.d, as well as a new sysctl script.

OP UPDATE: New Beta is up, not a whole lot of changes till tonight.

Sweet!
Can't wait til it's... Tonight...
For a second there, I was about to ask what's new with this upcoming version... That would have been pretty stupid...