Database Develop

[ROM] S5570XXKS1 [09.2011][Android 2.3.5]

S5570XXKS1:
Android 2.3.5
http://hotfile.com/dl/133436089/a8fc74e/GT-S5570_SER_1.rar.html
Pass: sampro.pl

For which country?

denzel09 said:
For which country?
Click to expand...
Click to collapse
http://samfirmware.com/samsunglettercode.htm
XX = Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom

SER = Russia

Thanks, which firmware is more update? S5570XWKS2 or S5570XXKS1 ?
How you control all this stuff?

So It's a update of 2.3.4 XXKPK firmware ?

Hari23 said:
So It's a update of 2.3.4 XXKPK firmware ?
Click to expand...
Click to collapse
I think so

[rom][n7000] n7000xxlrg - 4.0.4

There is another thread already opened for this......
.........Thread Closed.........
As a topic, rom open in July, released in Germany, android 4.0.4
PDA: N7000XXLRG
CSC: N7000DBTLRG
Version: 4.0.4
Date: 2012-07-04
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
http://www.hotfile.com/dl/162875101/447fb8f/N7000XXLRG_N7000DBTLRG_DBT.zip.html

radekklamzynski7 said:
As a topic, rom open in July, released in Germany, android 4.0.4
PDA: N7000XXLRG
CSC: N7000DBTLRG
Version: 4.0.4
Date: 2012-07-04
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
http://www.hotfile.com/dl/162875101/447fb8f/N7000XXLRG_N7000DBTLRG_DBT.zip.html
Click to expand...
Click to collapse
Have you tried it?
Sent from my GT-N7000 using Tapatalk 2

http://forum.xda-developers.com/showthread.php?t=1764893
Requesting mods to close this thread.. Peace bro!

kitrax59 said:
http://forum.xda-developers.com/showthread.php?t=1764893
Requesting mods to close this thread.. Peace bro!
Click to expand...
Click to collapse
I did with root
http://db.tt/P6k6hAXA

robertberma said:
I did with root
http://db.tt/P6k6hAXA
Click to expand...
Click to collapse
Glad you rooted it.. Rooting the new 4.0.4 also discussed on post #62 and #70 to be exact..

How about the change?
Any one flash this comment something about battery? signal? and so on...

The latest rom from Samsung! Version 4.0.4! Straight from Germany. There are not yet confirmed whether brickbug is whether it is not, in any case, please be careful.
Note that there is no official SAFE kernel!
tested, rom works smoothly as long as I've done full wipe of stock recovery.

Already here same thread in general
http://forum.xda-developers.com/showthread.php?t=1764893
Mod
plz close thread

Thread closed
This doesn't belong in Development. Refer to the other thread linked above.

[ROM][p3110][4.1.1] OFFICIAL STOCK FIRMWARE

Here is the official SAMSUNG Jelly Bean firmware for the P3110:
(France) http://www.hotfile.com/dl/181336164/c820d0c/P3110XXCLK7_P3110XEFCLK2_XEF.zip.html
PDA: P3110XXCLK7
CSC: P3110XEFCLK2
Version: 4.1.1
Date: 2012-11-23
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
(United Kingdom) http://www.hotfile.com/dl/182607797/b61e3af/P3110XXCLK7_P3110OXACLK7_BTU.zip.html
ALTERNATIVE DOWNLOAD: https://docs.google.com/open?id=0B_DjdqH3U7pLdWNsNWVGVWt5Zlk
PDA: P3110XXCLK7
CSC: P3110OXACLK7
Version: 4.1.1
Date: 2012-11-24
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
INSTRUCTIONS:
FLASH USING ODIN - https://docs.google.com/folder/d/0B_DjdqH3U7pLWG1MQVZaWFlQSmc/edit
EXTRACT FILE AND PLACE INTO PDA SECTION ON ODIN (repartition unticked - auto re-boot ticked - F. reset time ticked)
IF COMING FROM CUSTOM ROM - REBOOT INTO RECOVERY AND WIPE DATA, CACHE, DALVIC (format system optional)
IF COMING FROM STOCK 4.0.4 NO WIPING NECESSARY (but if after flash you get stuck on boot screen then reboot into stock recovery and
wipe data and cache - reboot)
OF COARSE ODIN IN USED VIA THE DEVICE'S "DOWNLOAD MODE"
There have been no releases for the P3113 but if you get impatient then these should flash on your device as they are almost identical
I will keep this updated with more SAMSUNG P3110 firmwares

I need DBT :laugh: :fingers-crossed:

I think someone posted this long time ago,take a look here http://forum.xda-developers.com/showthread.php?t=1838072
Cheers!

Looks like the other thread doesn't have a link for the latest UK version yet.
Is there a difference between the France and UK *CLK7 firmware? The PDA code is the same, the CSC code is different. Looks like they were released one day apart from each other.

rsage said:
Looks like the other thread doesn't have a link for the latest UK version yet.
Is there a difference between the France and UK *CLK7 firmware? The PDA code is the same, the CSC code is different. Looks like they were released one day apart from each other.
Click to expand...
Click to collapse
I havent tried the UK version yet but I noticed that the French version didnt have the ability to write and draw on a screen shot.... unlike the 4.0.4 feature

Can somebody please put a different mirror? For some reason i can't download from hotfile. Thanks
Sent from my GT-P3110 using xda premium

dodimo said:
Can somebody please put a different mirror? For some reason i can't download from hotfile. Thanks
Sent from my GT-P3110 using xda premium
Click to expand...
Click to collapse
Which one do you want UK or France??

Hello, Is there FIRMWARE that includes Arabic Language ? ( for interface, writing, reading, full support) ?
If so, please i need link OTHER than hotfile, to download.
EDIT: PLEASE DELETE THIS POST, I'VE 3100 NOT 3110.
BRGRDS

mohgaza said:
Hello, Is there FIRMWARE that includes Arabic Language ? ( for interface, writing, reading, full support) ?
If so, please i need link OTHER than hotfile, to download.
EDIT: PLEASE DELETE THIS POST, I'VE 3100 NOT 3110.
BRGRDS
Click to expand...
Click to collapse
There is a Kazakhstan 4.0.4 (ice cream sandwich) so maybe that contains Arabic?
I think the 4.1 UK supports it though... My girlfriend has taken my tablet with her away for the week so I can't check..
Ill post a mirror for you soon with the 4.1 (jelly bean)

The question is can this be rooted?

OK I'll still post a mirror for people

matthewgwilt said:
Which one do you want UK or France??
UK please
Thanks
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse

This works even if I have stock 4.0.3 (and not 4.0.4), does it?

trinity1 said:
This works even if I have stock 4.0.3 (and not 4.0.4), does it?
Click to expand...
Click to collapse
Yeah will work fine.... plus you don't have to wipe anything

New alternative UK link added to 1st page. (XXCLK7)
Thanks

This ROM has brazilian portuguese language?

ok now, I'm ready to flash via odin, but I have a doubt: I don't know whether I can/have to root and install the recovery BEFORE updating to 4.1.1 (because I think I would loose root) or if there is a method to do that AFTER the update (and where I can find it an appropriate one)...

trinity1 said:
ok now, I'm ready to flash via odin, but I have a doubt: I don't know whether I can/have to root and install the recovery BEFORE updating to 4.1.1 (because I think I would loose root) or if there is a method to do that AFTER the update (and where I can find it an appropriate one)...
Click to expand...
Click to collapse
You will lose root access but can easily get it back by using CF root via odin... you will find that in this very development section.
This will also install stock recovery but you can easily install clockwork recovery back too

I flashed with Mobile Odin and root was preserved

no firmware for Malaysian set?

[Q] Today's Firmware Update for TGY (Hong Kong) Back to 4.1.1?

The I9305 firmware update for the TGY (Hong Kong) region just came out...so I updated...only to find it is 4.1.1 still...but all other I9305 and I9300 updates are going to 4.1.2 ... why did Hong Kong get 4.1.1 again? Any ideas why this happens?

it's a carrier thing. they were working on a 4.1.1 base not a 4.1.2 base.. just means they're slow or there's something in 4.1.2 they didn't like.

random.. its not a typo is it? well the changelig is completely different too so i wouldn't be surprised. question is, does it have the premium suite features?

That's just the thing any firmware release in Hong Kong is not linked to a specific carrier by law. However, the I9305 is a little different because it has LTE and only one provider in Hong Kong, 中国移动 has LTE so they are the only who carry the phone...but still unbranded. How do I check if it has the premium suite? Since it is 4.1.1 I cannot see this being possible? Is there any other I9305 4.1.2 stock release capable of Chinese localization? Thanks!

Innis said:
That's just the thing any firmware release in Hong Kong is not linked to a specific carrier by law. However, the I9305 is a little different because it has LTE and only one provider in Hong Kong, 中国移动 has LTE so they are the only who carry the phone...but still unbranded. How do I check if it has the premium suite? Since it is 4.1.1 I cannot see this being possible? Is there any other I9305 4.1.2 stock release capable of Chinese localization? Thanks!
Click to expand...
Click to collapse
Innis,
Your information "only one provider in Hong Kong, 中国移动 has LTE" is WRONG.
Most provider in Hong Kong have LTE. You can only say that the update release from 4.1.1 to 4.1.2 will be done by region one by one but not all at the same time. Please correct me if I am wrong.
---------- Post added at 04:49 PM ---------- Previous post was at 04:21 PM ----------
Innis said:
That's just the thing any firmware release in Hong Kong is not linked to a specific carrier by law. However, the I9305 is a little different because it has LTE and only one provider in Hong Kong, 中国移动 has LTE so they are the only who carry the phone...but still unbranded. How do I check if it has the premium suite? Since it is 4.1.1 I cannot see this being possible? Is there any other I9305 4.1.2 stock release capable of Chinese localization? Thanks!
Click to expand...
Click to collapse
Cowboy88 said:
Innis,
Your information "only one provider in Hong Kong, 中国移动 has LTE" is WRONG.
Most provider in Hong Kong have LTE. You can only say that the update release from 4.1.1 to 4.1.2 will be done by region one by one but not all at the same time. Please correct me if I am wrong.
Click to expand...
Click to collapse
Innis,
What I can find in SamMobile for the new Firmware for Hong Kong as below.
PDA: I9305ZHBLL3
CSC: I9305TGYBLJ1
Version: 4.1.2
Date: 2012-12-27
Regions: Hong Kong

Cowboy88 said:
Innis,
Your information "only one provider in Hong Kong, 中国移动 has LTE" is WRONG.
Most provider in Hong Kong have LTE. You can only say that the update release from 4.1.1 to 4.1.2 will be done by region one by one but not all at the same time. Please correct me if I am wrong.
---------- Post added at 04:49 PM ---------- Previous post was at 04:21 PM ----------
Innis,
What I can find in SamMobile for the new Firmware for Hong Kong as below.
PDA: I9305ZHBLL3
CSC: I9305TGYBLJ1
Version: 4.1.2
Date: 2012-12-27
Regions: Hong Kong
Click to expand...
Click to collapse
Cowboy, you are right...there are 5 providers in HK that have LTE... when I visited HK from China I was told only 中国移动 had it because that is what I have in China. My mistake. The firmware you list from SamMobile is incorrect...I have already tried contacting SamMobile about their error. If you install that firmware listed it will still say 4.1.1 as does the new release this morning. Taiwan and China also got the 4.1.1 update with their I9300. I guess the only option is the Singapore release to get 4.1.2 with Chinese localization at this point...IF that gets released to 4.1.2.

I also got the same thing with my Samsung Galaxy S3 GT-I9305 which I bought from ebay and it has the Hong Kong version (Baseband version I9305ZHALI2 & Build number I9305ZHBLL3) (Unrooted) with android 4.1.1 and when I connected my s3 I9305 to my laptop through the Samsung Kies it told me there is new update for my phone's frimware so I did that and every thing was fine but when I checked my phone the version is still 4.1.1 so I don't know what does that mean ?

Bandar.99 said:
I also got the same thing with my Samsung Galaxy S3 GT-I9305 which I bought from ebay and it has the Hong Kong version (Baseband version I9305ZHALI2 & Build number I9305ZHBLL3) (Unrooted) with android 4.1.1 and when I connected my s3 I9305 to my laptop through the Samsung Kies it told me there is new update for my phone's frimware so I did that and every thing was fine but when I checked my phone the version is still 4.1.1 so I don't know what does that mean ?
Click to expand...
Click to collapse
Still not sure myself. But I know HK got 4.1.1 originally a month after everyone else...so that means we should get 4.1.2 in February!!

Innis said:
Still not sure myself. But I know HK got 4.1.1 originally a month after everyone else...so that means we should get 4.1.2 in February!!
Click to expand...
Click to collapse
Hopefully that's coming soon, we will wait and see what will happen !

Bandar.99 said:
I also got the same thing with my Samsung Galaxy S3 GT-I9305 which I bought from ebay and it has the Hong Kong version (Baseband version I9305ZHALI2 & Build number I9305ZHBLL3) (Unrooted) with android 4.1.1 and when I connected my s3 I9305 to my laptop through the Samsung Kies it told me there is new update for my phone's frimware so I did that and every thing was fine but when I checked my phone the version is still 4.1.1 so I don't know what does that mean ?
Click to expand...
Click to collapse
Yeah its only a minor firmware update (16.--mb) to increase stability on 4.1.1, not a major update like 4.1.2. That should come pretty soon.

Yeah, there is 4.1.2 for other countries(I just saw that on SamMobile.
It wrote that Hong Kong has already had 4.1.2 , I'm sure it's a typing mistake.
Take a look at my attachment to see what I've seen.

Mitch_Faiz_555 said:
Yeah, there is 4.1.2 for other countries(I just saw that on SamMobile.
It wrote that Hong Kong has already had 4.1.2 , I'm sure it's a typing mistake.
Take a look at my attachment to see what I've seen.
Click to expand...
Click to collapse
Sammobile has been wrong about 4.1.2 since December (I have emailed them about this) ... all other repository Samsung sites list is as 4.1.1 NOT 4.1.2. So far no TGY firmwares on any Samsung device has been 4.1.2. I REALLY want 4.1.2 with Chinese localization and TGY is the only way! Except maybe MM1 (Singapore) but their localization is a little different than with Mainland China... hopefully TGY goes 4.1.2 soon... if you look at the most updated firmwares for I9305... you will see that TGY is updated more frequently than others...

Did anyone get the update to 4.1.2 for the TGY ???

chrisstavrou said:
Did anyone get the update to 4.1.2 for the TGY ???
Click to expand...
Click to collapse
No 4.1.2 TGY on any Samsung device yet. But there is hope... Hong Kong, China and Taiwan use the same build... and all are on 4.1.1 but yesterday Taiwan got 4.1.2 for the I9300. So hopefully it will be soon!

Innis said:
No 4.1.2 TGY on any Samsung device yet. But there is hope... Hong Kong, China and Taiwan use the same build... and all are on 4.1.1 but yesterday Taiwan got 4.1.2 for the I9300. So hopefully it will be soon!
Click to expand...
Click to collapse
Dear Colleague,
Other than the stock rom, you may consider to have the custom rom by WanamLite XXBLL5 V1.1 of which have
+Enabled all supported languages
+Multi CSC (+124)
and they should be closed to TGY

chrisstavrou said:
Did anyone get the update to 4.1.2 for the TGY ???
Click to expand...
Click to collapse
Just plugged in my I9300 into Kies and there was a prompt:
Current firmware version : PDA:LL1 / PHONE:LJ2 / CSC:LL1 (TGY)
Latest firmware version : PDA:MA1 / PHONE:LLA / CSC:MA1 (TGY)
Hope this is it!

clivechen said:
Just plugged in my I9300 into Kies and there was a prompt:
Current firmware version : PDA:LL1 / PHONE:LJ2 / CSC:LL1 (TGY)
Latest firmware version : PDA:MA1 / PHONE:LLA / CSC:MA1 (TGY)
Hope this is it!
Click to expand...
Click to collapse
Yes, it is 4.1.2 for TGY.

clivechen said:
Yes, it is 4.1.2 for TGY.
Click to expand...
Click to collapse
Hopefully I9305 4.1.2 follows soon now...

This is still 4.1.1, to fix the security bugs, I'm using this on my i9305.
Alfred

I'm using I9305, from Singapore, telco is Starhub..
also still 4.1.1... doesn't have any new update :crying:

Tpa (owo) to ins (odm) firmewire

Hello, how One ui 2.1 just release to India and europe A71, i want to no, if is possible change Panama OWO rom to India ODM new firmewire and how
India (INS)
PDA A715FXXU2ATG1
CSC A715FODM2ATG3
PANAMA (TPA)
PDA A715FXXU2ATE9
CSC A715FOWO2ATE2

I've got the same firmware Panama tpa.
I've been thinking the same but would like to change to a UK btu firmware.
My previous phone was the galaxy note 3 and it was possible then as long as the firmware was the right model. I went from xef to a polish version when android 5.1.1came out

i can confirm it works ive just flashed the polish firmware PANAMA (TPA).
now running one ui 2.1

Lip9571 said:
i can confirm it works ive just flashed the polish firmware PANAMA (TPA).
now running one ui 2.1
Click to expand...
Click to collapse
You Mean Poland XEO ?

brayhanrd said:
You Mean Poland XEO ?
Click to expand...
Click to collapse
yes

Lip9571 said:
i can confirm it works ive just flashed the polish firmware PANAMA (TPA).
now running one ui 2.1
Click to expand...
Click to collapse
how did you do that? did it required any special sacrifice related to Knox or something?

I'm interested in this as well, I'm on TPA also. Specifically
- which region firmwares have one ui 2.1 and can safely be flashed to a phone with TPA firmware
- steps to flash a different region's firmware using Odin
Thanks
-