Related
With all due respect to all Senior members, i just had my kk1 rooted Samsung Galaxy Note.. Updated to LA1(stock roms).. In order to Root LA1 Kernel to Rocket Rom.. Where and how do i start.. ??
Just download rocketrom v22(latest)..if u have rooted your phone,u should have cwm.. enter the cmw recovery mode,make a full wipe,and flash the rocketrom zip file..
Before flashing any Rom,it is better for you to make a nandroid backup and also titanium backup..of anything goes wrong,u can restore it back and get to the previous state of your phone..
Fyi,there are also optional installment after flashing rocketrom..make sure u read the rr thread..
RR v22 is really awesome!!!
Sent from my GT-N7000 using XDA App
wafie said:
Just download rocketrom v22(latest)..if u have rooted your phone,u should have cwm.. enter the cmw recovery mode,make a full wipe,and flash the rocketrom zip file..
Before flashing any Rom,it is better for you to make a nandroid backup and also titanium backup..of anything goes wrong,u can restore it back and get to the previous state of your phone..
Fyi,there are also optional installment after flashing rocketrom..make sure u read the rr thread..
RR v22 is really awesome!!!
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
Thanks for the information bro Well yeah, that amaze me? With 1704mhz WILL WORK A LOT BETTER But sir, will due all respect from me.. i would like to ask.. that.. What is the best flash agent be use?? Many people said using Odin.. But i tried on flashing with Odin, no luck.. Stuck at kernel. And yet still functional like normal phone =D
And should i root before to install this ROCKETROM?? or i can direct flash in recovery??
AltecKevin90 said:
With all due respect to all Senior members, i just had my kk1 rooted Samsung Galaxy Note.. Updated to LA1(stock roms).. In order to Root LA1 Kernel to Rocket Rom.. Where and how do i start.. ??
Click to expand...
Click to collapse
Follow this thread
http://forum.xda-developers.com/showthread.php?t=1329360
ranjan.alva said:
Follow this thread
http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
Thanks, i just used odin to flash.. But i notice of Yellow Triangle Exclamation Mark.. on reboot.. What does the Yellow Triangle Exclamation Mark mean..? Does it harm my phone..? But my phone running in normal stat, with CMW and SuperUser..
AltecKevin90 said:
Thanks, i just used odin to flash.. But i notice of Yellow Triangle Exclamation Mark.. on reboot.. What does the Yellow Triangle Exclamation Mark mean..? Does it harm my phone..? But my phone running in normal stat, with CMW and SuperUser..
Click to expand...
Click to collapse
Please before flashing any Custom ROM read entire post Carefully.
You already flashed Custom ROM Using Odin. So what your binary counter is raised. (To check Reboot in Download mode and See Custom Binary Count=?)
It doesn't harm your device. but you wont get warranty anymore. you regain your warranty you should remove Yellow triangle (!) please follow this thread
http://forum.xda-developers.com/showthread.php?t=1354888
Please anymore do not use PC Odin only for Stock ROM. For Flashing Custom ROM use CWM Recovery.
ranjan.alva said:
Please before flashing any Custom ROM read entire post Carefully.
You already flashed Custom ROM Using Odin. So what your binary counter is raised. (To check Reboot in Download mode and See Custom Binary Count=?)
It doesn't harm your device. but you wont get warranty anymore. you regain your warranty you should remove Yellow triangle (!) please follow this thread
http://forum.xda-developers.com/showthread.php?t=1354888
Please anymore do not use PC Odin only for Stock ROM. For Flashing Custom ROM use CWM Recovery.
Click to expand...
Click to collapse
Looks like in future more.. I guess that Odin is not longer useable.. The counter will keep raising.. So right now, i download the how to remove yellow triangle exclamation mark.. And Flashing Custom Rom like RR or Other custom rom using CMW Recovery..?
And do i need to use JIG for this method?? Since i can connect to Download mode, Correct me if i were wrong about The Jigs is for the phone which wont boot up anymore.. Right?
Okay, i guess that i need JIG for this.. gotta need it from some hardware shop.. nearby..
Hello
I have a question about CWM and the binary counter : does the binary counter increment while flashing with CWM ?
dark-k said:
Hello
I have a question about CWM and the binary counter : does the binary counter increment while flashing with CWM ?
Click to expand...
Click to collapse
No.
Sent from my GT-N7000 using xda premium
i prefer using cwm..it is simple n better..read dr.ketan's thead,i also learn from there..
Sent from my GT-N7000 using XDA App
Is there any idea by Rest to factory default will make the yellow triangle exclamation mark gone??? Thanks in advance for reply
AltecKevin90 said:
Is there any idea by Rest to factory default will make the yellow triangle exclamation mark gone??? Thanks in advance for reply
Click to expand...
Click to collapse
Nope..Factory reset clears ONLY the user-installed applications and data..for removing the yellow triangle u shud use JIG mentioned here.gud luck
just wanna ask.. if i am from LA1 stock rom, rooted and cmw.. Can i flash rocket rom v22 str8 which is LA6 base?? or i need to flash v20 which is LA4 base first than only flash to v22?? thanks..
AltecKevin90 said:
Looks like in future more.. I guess that Odin is not longer useable.. The counter will keep raising.. So right now, i download the how to remove yellow triangle exclamation mark.. And Flashing Custom Rom like RR or Other custom rom using CMW Recovery..?
And do i need to use JIG for this method?? Since i can connect to Download mode, Correct me if i were wrong about The Jigs is for the phone which wont boot up anymore.. Right?
Click to expand...
Click to collapse
Odin can be used only for Flashing Stock ROM. Flashing Stock ROM using PC Odin wont raise Binary Counter. You have to Flash Custom ROMs using CWM Recovery or Mobile Odin.
Yellow Triangle wont harm your device. you wont get warranty that's it.
If you want regain the warranty you should remove yellow triangle from device. that means you should use JIG. JIG can be used for 2 problems. 1 is for who cant get in to download mode and second is to remove Yellow Triangle.
---------- Post added at 12:02 AM ---------- Previous post was at 12:01 AM ----------
almansa said:
just wanna ask.. if i am from LA1 stock rom, rooted and cmw.. Can i flash rocket rom v22 str8 which is LA6 base?? or i need to flash v20 which is LA4 base first than only flash to v22?? thanks..
Click to expand...
Click to collapse
You can flash any ROM.
wafie said:
Just download rocketrom v22(latest)..if u have rooted your phone,u should have cwm.. enter the cmw recovery mode,make a full wipe,and flash the rocketrom zip file..
Before flashing any Rom,it is better for you to make a nandroid backup and also titanium backup..of anything goes wrong,u can restore it back and get to the previous state of your phone..
Fyi,there are also optional installment after flashing rocketrom..make sure u read the rr thread..
RR v22 is really awesome!!!
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
Hi,
I have already flashed this rom
Recording both side conversation using Blut tooth hands free is required. This rom does not do it. How do I record both side conversation using blue tooth.
Will "rocket ROM 19 + faby71 call rec mod + total recall recorder (common version) " work as stated in some other post?
Where can I download "faby71 call rec mod"?
Does it work with ROCKET-v22 -LA6-eybee1970 using blue tooth head phone with any call recorder?
The another BIG issue I get with ROCKET-v22-LA6-eybee1970 is
1) HIGH BATTERY DRAIN &
2) Mobile data network getting switch on automatically without permission even when it is switched off manually.
Please help. [email protected]
Kin
ranjan.alva said:
Odin can be used only for Flashing Stock ROM. Flashing Stock ROM using PC Odin wont raise Binary Counter. You have to Flash Custom ROMs using CWM Recovery or Mobile Odin.
Yellow Triangle wont harm your device. you wont get warranty that's it.
If you want regain the warranty you should remove yellow triangle from device. that means you should use JIG. JIG can be used for 2 problems. 1 is for who cant get in to download mode and second is to remove Yellow Triangle.
---------- Post added at 12:02 AM ---------- Previous post was at 12:01 AM ----------
You can flash any ROM.
Click to expand...
Click to collapse
if let say i am on KK1.. Than i need to upgrade at least to LA1 rom first right?? Cos i tried to flash RR v22 when i am on KK1.. But failed..
almansa said:
if let say i am on KK1.. Than i need to upgrade at least to LA1 rom first right?? Cos i tried to flash RR v22 when i am on KK1.. But failed..
Click to expand...
Click to collapse
I just updated my rom from KK1 to LA1 and installed v22 Rocket Rom. Bear in mind, when flashing custom rom, please don't use ODIN in Standart or Original rom in LA1 and get Yellow Triangle Exclamation Mark..
lingamkrishnan said:
Nope..Factory reset clears ONLY the user-installed applications and data..for removing the yellow triangle u shud use JIG mentioned here.gud luck
Click to expand...
Click to collapse
how about flashing it back to stocks rom? No luck?
AltecKevin90 said:
how about flashing it back to stocks rom? No luck?
Click to expand...
Click to collapse
Flashing stock roms using PC odin will unroot the device...please avoid flashing custom roms using PC odin..PC odin can be used only flashing STOCK roms..i think there is no other way of removing yellow triangle other than JIG sorry dude.
Hi guys, I am a bit 'desperate, I unfortunately the other day I installed it in my notes a kernel that unfortunately has damaged my recovery mode, the phone no longer gave me the opportunity even to restore a backup, of course it will odin mobile rom manager worked, so only solution I had to flash a kernel on odin with the pc and I solved the problem but I did take the counter with its yellow triangle. So I took and followed to perfection (well I had the stopwatch) driving with the jig and odin, but besides not work gave me because I was nail-biting with a black screen for over an hour. I have a couple of questions / concerns: - I read that flashando odin with a PC in the stock kernel (currently I xxlb1, I can use these kernel firmware?)'ll Remove ignition the yellow triangle but nn I reset the counter, right? In addition, subsequent flashes with Cwm, Roma manager and mobile odin increase or leave unchanged the counter? -But if flasho with odin old pc n firmware, for example KKA with the pit and the three files that happen? I apologize in advance if this question of hours and already been addressed, and if my posts are messy but really are desperate ... Thank you and good weekend to all
Flash counter remains untouched when you flash ne stock rom whether single /multi files.
If u use mobile odin / cwm still it remain unchanged.
You can flash kernel without problem with mobile Odin.
Rom manager mot supports note.
Just remember, you have not to flash any custom rom/kernel with pc odin
Sent from my GT-N7000 using xda premium
Advice
Thanks for your answer,
So what is your advice? I don t want to see yellow triangle, so to erase that I can flash by odin mobile or Cwm a stock kernel???
Now in my phone I have xxlb1, do you know where I can find the right kernel stock?
Please help me thanks a lot
Here's what I would do. Install a new rooted ICS rom, use triangleaway to reset binary counter
I'm pretty sure triangle away only works with ICS. Can anyone confirm? Want to make sure I'm giving correct info.
Afterwards you can then PC Odin back to a stock rom.
Hope this helps
Sent from my GT-N7000 using Tapatalk
Please read this first:
I was able to reset the binary counter and remove the yellow triangle by using the method described in #13 of this thread, but you should understand that my phone was already soft-bricked. As you will know from reading posts #18 and #21, that the Angelom kernel 1.2 should be used to reset your binary counter and remove the yellow triangle, ONLY WHEN your device is ALREADY bricked, otherwise you may brick your working device. Be cautioned.
Original post:
I have been struggling for two days now with an issue of some kind of brick. Without going into whether it is a soft brick or a hard brick, this is how my situation is:
- I can boot into download mode
- I can boot into stock recovery mode
- I am unable to flash any ROM as all of them get stuck at factoryfs
- I flashed several kernels, stock as well as custom, and the latest kernel I flashed was a CF kernel
- After flashing the CF kernel, I saw the yellow triangle at the Samsung boot prompt and the flash counter increased by 1
- I flashed a stock kernel over the CF kernel which made the yellow triangle go away, but I still have the flash count increased
I do not wish to go for any trial and error methods now, so I am thinking of sending my Note to Samsung for repairs. Can someone help me with resetting the flash counter to 0? I do not wish to sound impatient, but I really do not have much time to wait for the JIG solution, so if someone can help with resetting the flash counter without using JIG, it would greatly help.
I have insurance on my phone and I bought the phone a week ago. Please also let me know if I can use my insurance if Samsung decides to charge me. Ideally, I would like a replacement, as it is a confirmed bug from Google that caused my phone to be bricked, and also since I have had the phone only for a week, but I don't know how to convince the seller I need a new phone, as they will try to get it fixed and return the same back.
Is there anything else other than the flash counter that I should wipe/reset before sending it to Samsung? I took a Nandroid backup of a stock odexed GB ROM last week which is under a folder called "CWM". Is the CWM folder in the internal storage (USB storage) or the external SD card? If it is in internal, how do I wipe it? My phone doesn't have any battery so I can't check the location of CWM folder myself.
Thanks.
If you can still enter download mode, there is hope to flash a stock rom.You need the pit file,matching your device version(16 or 32 gb). Also a bootloader wouldn't hurt to have around.
I got 3 errors when i first tried to flash my note,but i solved it with the pit file.Just google for it.
kimitza said:
If you can still enter download mode, there is hope to flash a stock rom.You need the pit file,matching your device version(16 or 32 gb). Also a bootloader wouldn't hurt to have around.
I got 3 errors when i first tried to flash my note,but i solved it with the pit file.Just google for it.
Click to expand...
Click to collapse
I have tried flashing stock ROMs but none of them came with a PIT file or a bootloader. I have tried installing a stock bootloader too, by itself, but nothing allows me to go beyond factoryfs. Are you saying flashing a stock ROM with a matching PIT can make the difference?
There's a sticky thread in Development called
How to reset your counter.
chasmodo said:
There's a sticky thread in Development called
How to reset your counter.
Click to expand...
Click to collapse
Thanks, I know about it, but I do not have the time to buy the JIG, wait for it and try it out on my device, if that's what you refer to. I am in a time crunch as my 15 days of purchase of this phone will be complete next week, and beyond that I wouldn't get any special privileges from the seller. This is why, I am looking for a method that involves flashing using Odin or stock CWM. It's a long shot, but I am hoping someone can help.
Jig is the only way for you to reset the counter on a bricked phone, sorry.
Wasnt there a kernel that Angelom did to reset the flash counter on his superbricks with Team Rocket ICS?
Maybe dig up the old thread in the dev section and check. It was a quick and dirty to reset counter and make it official again.
hkgrob said:
Wasnt there a kernel that Angelom did to reset the flash counter on his superbricks with Team Rocket ICS?
Maybe dig up the old thread in the dev section and check. It was a quick and dirty to reset counter and make it official again.
Click to expand...
Click to collapse
Yes, you are right! I completely forgot about that.
To the OP: I will give you the download link if you can wait till tomorrow.
I am abroad ATM.
incisivekeith said:
I have tried flashing stock ROMs but none of them came with a PIT file or a bootloader. I have tried installing a stock bootloader too, by itself, but nothing allows me to go beyond factoryfs. Are you saying flashing a stock ROM with a matching PIT can make the difference?
Click to expand...
Click to collapse
Yes, it can be done.
Use the pit for your version (16 or 32 gb).
kimitza said:
Yes, it can be done.
Use the pit for your version (16 or 32 gb).
Click to expand...
Click to collapse
Thanks hkgrob, Chasmodo and kimitza. I appreciate it.
So do I need to just flash the 16 GB (I have 16 GB Note) PIT file using Odin and that should reset the flash counter? Just want to make sure I am doing it right.
Edit: I just flashed the 16 GB PIT file using 1.85 PC Odin along with a stock kernel, but the counter has not reset. Also, there is no kernel file, that hkgrob mentioned, in the zipped attachment.
I am not able to find the kernel through search. Could someone upload the kernel which would reset the counter? I will try again after that. Thanks.
incisivekeith said:
Thanks hkgrob, Chasmodo and kimitza. I appreciate it.
So do I need to just flash the 16 GB (I have 16 GB Note) PIT file using Odin and that should reset the flash counter? Just want to make sure I am doing it right.
Click to expand...
Click to collapse
No, flashing pit file will not reset your counter. Angelom 1.2 kernel will, but as I said
I will give you the DL tomorrow (if someone else doesnt post it first).
chasmodo said:
No, flashing pit file will not reset your counter. Angelom 1.2 kernel will, but as I said
I will give you the DL tomorrow (if someone else doesnt post it first).
Click to expand...
Click to collapse
Yes, that's what I figured. I found a link to this kernel in this thread and downloaded it, but it's an ICS kernel, which is also supposed to reset the counter. Is this the one you talk about? And, if it is the right kernel, I guess I should flash it with the PIT file with PC Odin. Correct?
I am on stock GB recovery - for your information.
If anyone else can post the kernel before Chasmodo does, that would be great. Thanks.
A little diversion: For some reason the stock recovery shows there are no files on my SD card, while other recoveries do. Is this supposed to be this way? With stock recovery, I am unable to access anything on my SD card.
I will post this as a separate thread, as it does not fit as an edit in my previous post.
I found this thread, and got encouraged to flash the ICS kernel which the OP in that thread also found. Flashing the ICSTest kernel by Angelom rebooted with a yellow triangle at the Samsung prompt and booted into touch CWM. I rebooted the phone using the reboot option on CWM. With the reboot, the triangle is gone and the binary counter says "No." So, I think mission accomplished for now.
Will there be a way Samsung to tell now if I ever flashed custom recoveries, ROMs and kernels or that phone was rooted before the Google-admitted bug screwed everything up?
incisivekeith said:
I will post this as a separate thread, as it does not fit as an edit in my previous post.
I found this thread, and got encouraged to flash the ICS kernel which the OP in that thread also found. Flashing the ICSTest kernel by Angelom rebooted with a yellow triangle at the Samsung prompt and booted into touch CWM. I rebooted the phone using the reboot option on CWM. With the reboot, the triangle is gone and the binary counter says "No." So, I think mission accomplished for now.
Will there be a way Samsung to tell now if I ever flashed custom recoveries, ROMs and kernels or that phone was rooted before the Google-admitted bug screwed everything up?
Click to expand...
Click to collapse
Just flash a stock kernel now, and they probably won't be able to tell that you ever used any custom stuff.
No need to removed the counter & triangle, just send it back to SSC, they will fix it for you, because they already know the reason you send it back, cheer up!
amytjia said:
No need to removed the counter & triangle, just send it back to SSC, they will fix it for you, because they already know the reason you send it back, cheer up!
Click to expand...
Click to collapse
I am guessing you work for Samsung.
Chasmodo, I have already flashed a stock kernel and am trying to use adb, but I am almost certain I will send it to Samsung. Adb results in "/bin/sh...:No such file...(2)".
chasmodo said:
Just flash a stock kernel now, and they probably won't be able to tell that you ever used any custom stuff.
Click to expand...
Click to collapse
Hi chasmode
I am on ALBA ICS XXLPY V2.2 right now. Can i flash this with pc odin to reset binary to 0.
And yes then this ICS kernal will affect the current rom I am running.
samtani776 said:
Hi chasmode
I am on ALBA ICS XXLPY V2.2 right now. Can i flash this with pc odin to reset binary to 0.
And yes then this ICS kernal will affect the current rom I am running.
Click to expand...
Click to collapse
No. Angelom 1.2 will reset your counter, but it will also give you a hard brick in
no time at all. It is to be used to reset the counter only in cases where a hard brick is already there, sorry.
Thanks a lot. Bookmarked this page in case if I need it in future.
chasmodo said:
No. Angelom 1.2 will reset your counter, but it will also give you a hard brick in
no time at all. It is to be used to reset the counter only in cases where a hard brick is already there, sorry.
Click to expand...
Click to collapse
Is that true that flashing the Angelom 1.2 will hard brick a phone if it's not already bricked? Is that kernel not useful for any ROMs? I am curious because if that's true, I will change the title of my thread.
hello everyone
my friend bricked his note and i don't know what to do for him, my friend has no exper experience, he did a restore on a nonsafe kernel
his phone is semi bricked (if not fully bricked), i tried using odin to flash a stock rom (gb then ics) but had no luck and proccess stops at "NAND write start", i tried only to flash a kernel which was abyssnote but also got stuck on "NAND write start" and i tried to use the pit file from this post (http://forum.xda-developers.com/showthread.php?t=1667886) with a stock rom and with re-partition checked on odin and now it is stuck on:
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
please help me as the phone has been stuck on this state (pit file way) for over 80 minutes
waiting for your answer...
i unpluged my phone now and i am trying a custom pit file (N7000_16GB_Q1_20110914--patched--brick-between-281-and-3770-MB--FACTORYFS-moved-by-3328-MiB.pit) after leaving my phone for up to 2 hours and with no progress using N7000_16GB_Q1_20110914-stock.pit
file, hope i can revive my friend phone and please try to point me for any solution i can try.
Check your connection. Usually if bricked the process will start ok but halt at factory.fs. Try with a different usb cable, make sure it's in a mobo usb port not front one.
Pit files should be a last resort. I don't think it's bricked personally. Does it power on at all?
Sent from my GT-N7000 using xda app-developers app
SpyderTracks said:
Check your connection. Usually if bricked the process will start ok but halt at factory.fs. Try with a different usb cable, make sure it's in a mobo usb port not front one.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
how can i use mobie odin if i can't even access phone nor recovery?
hope there is a way
darkelfa2 said:
how can i use mobie odin if i can't even access phone nor recovery?
hope there is a way
Click to expand...
Click to collapse
Yeah, edited afterward.
Sent from my GT-N7000 using xda app-developers app
come on people... there most be someone who knows what i should do, please help
SpyderTracks said:
Check your connection. Usually if bricked the process will start ok but halt at factory.fs. Try with a different usb cable, make sure it's in a mobo usb port not front one.
Pit files should be a last resort. I don't think it's bricked personally. Does it power on at all?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
when odin get stuck on nand write start, the box above the port number with yellow mark says factoryfs, and yes the phone can olny boot to download mode
darkelfa2 said:
when odin get stuck on nand write start, the box above the port number with yellow mark says factoryfs, and yes the phone can olny boot to download mode
Click to expand...
Click to collapse
What is the outcome of flashing the "N7000_16GB_Q1_20110914--patched--brick-between-281-and-3770-MB--FACTORYFS-moved-by-3328-MiB.pit" as you mentioned above?
If you can also get into recovery, then better try to use hg42 partition scanner first, to see if and where the damage is in the emmc.
http://forum.xda-developers.com/showthread.php?t=1823918
forest1971 said:
What is the outcome of flashing the "N7000_16GB_Q1_20110914--patched--brick-between-281-and-3770-MB--FACTORYFS-moved-by-3328-MiB.pit" as you mentioned above?
If you can also get into recovery, then better try to use hg42 partition scanner first, to see if and where the damage is in the emmc.
http://forum.xda-developers.com/showthread.php?t=1823918
Click to expand...
Click to collapse
phone been on odin for about 40 minutes or so (is that normal?) but stuck on set partition and as i mentioned above, i cant access my phone nor recovery but i can access download mode.
darkelfa2 said:
phone been on odin for about 40 minutes or so (is that norma?l) but stuck on set partition and as i mentioned above, i cant access my phone nor recovery but i can access download mode.
Click to expand...
Click to collapse
If that long, then that pit doesn't seem to work.
I would try to flash a custom kernel such as hydracore or some other kernel that are available in .tar format. Then see if it help the phone get into recovery.
If that does not work, then just need to try other pit file from hg42 thread which move factoryfs by bigger number until it work. This is not a good strategy but it seems to be the only way.
---------- Post added at 11:29 PM ---------- Previous post was at 11:19 PM ----------
This is a gb kernel that can be flashed via odin to see if recovery works.
http://www.mediafire.com/?smwswkxwa3u3p4s
forest1971 said:
If that long, then that pit doesn't seem to work.
I would try to flash a custom kernel such as hydracore or some other kernel that are available in .tar format. Then see if it help the phone get into recovery.
If that does not work, then just need to try other pit file from hg42 thread which move factoryfs by bigger number until it work. This is not a good strategy but it seems to be the only way.
---------- Post added at 11:29 PM ---------- Previous post was at 11:19 PM ----------
This is a gb kernel that can be flashed via odin to see if recovery works.
http://www.mediafire.com/?smwswkxwa3u3p4s
Click to expand...
Click to collapse
i got stuck on NAND write start agine, i think its time to try your other strategy, should i go with pit file that has factoryfs moved by the largest number first or the one with the less number?
darkelfa2 said:
i got stuck on NAND write start agine, i think its time to try your other strategy, should i go with pit file that has factoryfs moved by the largest number first or the one with the less number?
Click to expand...
Click to collapse
I would try the first way of flash a kernel since it does not take much time.
Anyway, if want to try second strategy should move up by 500 mb or 1 gb each time.
I saw some people reported problem after flashing a pit with big number them move back to flash a pit with small number so should try to avoid that situattion.
The next pit I would choose it the one move fatoryfs by 4608mib for example.
forest1971 said:
I would try the first way of flash a kernel since it does not take much time.
Anyway, if want to try second strategy should move up by 500 mb or 1 gb each time.
I saw some people reported problem after flashing a pit with big number them move back to flash a pit with small number so should try to avoid that situattion.
The next pit I would choose it the one move fatoryfs by 4608mib for example.
Click to expand...
Click to collapse
thank you for your replies, i will try to try them as you mentioned above and by the way and will wait 15-20 minutes in each operation, i already tried the last version of hydracore but had no success, one last thing, if none of them worked (hope not), is there any other possible way to revive from the brick(other than replacing the motherboard or replacing the phone from samsung)?
bricked or not
same problem here, was on stock ics rooted for quite sometime, today decided to flash alliance rom v2.1, booted to cwm recovery, did a full wipe and after that i just hated myself. phone didnt boot into recovery and odin gets stucked at factoryfs, tried to flash with pit file too but no result same stuck in problem. then i flashed different kernel fm note kernel through odin which was a success, got my recovery back but unfortunately the only rom i have on internal sd was alliance rom which doesnt install, either says emmc error alliance rom or stucks at extracting system. so again flashed abyss kernel and did a full wipe again but odin still does not go beyond factory fs and i am trying to flash ics rom again. any idea what i should do now as i can flash a kernel and go into recovery. help will be appreciated. meanwhile downloading gb rom to check as i read in other posts it works tough not sure.
sahil4u said:
same problem here, was on stock ics rooted for quite sometime, today decided to flash alliance rom v2.1, booted to cwm recovery, did a full wipe and after that i just hated myself. phone didnt boot into recovery and odin gets stucked at factoryfs, tried to flash with pit file too but no result same stuck in problem. then i flashed different kernel fm note kernel through odin which was a success, got my recovery back but unfortunately the only rom i have on internal sd was alliance rom which doesnt install, either says emmc error alliance rom or stucks at extracting system. so again flashed abyss kernel and did a full wipe again but odin still does not go beyond factory fs and i am trying to flash ics rom again. any idea what i should do now as i can flash a kernel and go into recovery. help will be appreciated. meanwhile downloading gb rom to check as i read in other posts it works tough not sure.
Click to expand...
Click to collapse
it is good as far as you can access cwm recovery, try to get any external sd, download a rom and put it on the external sd using other phone
and flash it using cwm and dont forget your safe kernel , and can you tell me please what kernel you've used?
sahil4u said:
same problem here, was on stock ics rooted for quite sometime, today decided to flash alliance rom v2.1, booted to cwm recovery, did a full wipe and after that i just hated myself. phone didnt boot into recovery and odin gets stucked at factoryfs, tried to flash with pit file too but no result same stuck in problem. then i flashed different kernel fm note kernel through odin which was a success, got my recovery back but unfortunately the only rom i have on internal sd was alliance rom which doesnt install, either says emmc error alliance rom or stucks at extracting system. so again flashed abyss kernel and did a full wipe again but odin still does not go beyond factory fs and i am trying to flash ics rom again. any idea what i should do now as i can flash a kernel and go into recovery. help will be appreciated. meanwhile downloading gb rom to check as i read in other posts it works tough not sure.
Click to expand...
Click to collapse
Once get recovery it is best to try to scan partition to identify where the damage is. You can you adb method in my manual repartition guide or the scanner from hg42 which is even better.
Sent from my phone
---------- Post added at 06:30 AM ---------- Previous post was at 06:25 AM ----------
darkelfa2 said:
thank you for your replies, i will try to try them as you mentioned above and by the way and will wait 15-20 minutes in each operation, i already tried the last version of hydracore but had no success, one last thing, if none of them worked (hope not), is there any other possible way to revive from the brick(other than replacing the motherboard or replacing the phone from samsung)?
Click to expand...
Click to collapse
Should try the kernel I sent and also the fm kernel suggested in the post above. Once having recovery it is much easier and there are more options. Otherwise, custom pit is the last resort before mobo replacement.
Sent from my phone
sahil4u said:
same problem here, was on stock ics rooted for quite sometime, today decided to flash alliance rom v2.1, booted to cwm recovery, did a full wipe and after that i just hated myself. phone didnt boot into recovery and odin gets stucked at factoryfs, tried to flash with pit file too but no result same stuck in problem. then i flashed different kernel fm note kernel through odin which was a success, got my recovery back but unfortunately the only rom i have on internal sd was alliance rom which doesnt install, either says emmc error alliance rom or stucks at extracting system. so again flashed abyss kernel and did a full wipe again but odin still does not go beyond factory fs and i am trying to flash ics rom again. any idea what i should do now as i can flash a kernel and go into recovery. help will be appreciated. meanwhile downloading gb rom to check as i read in other posts it works tough not sure.
Click to expand...
Click to collapse
Hi there, sounds like a bad flash or bad download. Firstly remove your external micro SD card and connect it to a PC / Laptop (standard SD adaptor or Card Reader). Download a "default" ROM and kernel and KEEP them on the card (you never know when you need to go back to them). I use Abyss 4.2 kernel and Chrack ROM personally. I always have the jBroid Kernel Cleaner saved also). Replace the micro SD card.
If you can get into Recovery, flash the jBroid script cleaner. Now flash Abyss 4.2 kernel (GB safe kernel) and reboot into Recovery again. Now flash Chrack Rom. I've had a number of bad flashes and these 3 zips have always pulled me out a hole.
Hope this helps. Hit Thanks if it did.
Alba Donzo said:
Hi there, sounds like a bad flash or bad download. Firstly remove your external micro SD card and connect it to a PC / Laptop (standard SD adaptor or Card Reader). Download a "default" ROM and kernel and KEEP them on the card (you never know when you need to go back to them). I use Abyss 4.2 kernel and Chrack ROM personally. I always have the jBroid Kernel Cleaner saved also). Replace the micro SD card.
If you can get into Recovery, flash the jBroid script cleaner. Now flash Abyss 4.2 kernel (GB safe kernel) and reboot into Recovery again. Now flash Chrack Rom. I've had a number of bad flashes and these 3 zips have always pulled me out a hole.
Hope this helps. Hit Thanks if it did.
Click to expand...
Click to collapse
i've already mentioned that it has no recovery mode, and yes, i always have abyssnote kernel in my ex-sd also in my friend's phone, the thing is that he don't know about the emmc bug and he did a restore on a none safe kernel and thats how he bricked his phone
what i've done so far is trying the pit file way but had no luck, now the thing is that the binary counter is 5 and i can't go to have a m/b replacement for free as the warranty is voided, is there any way to reset the counter or to hardbrick the phone except for the jig method?
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing
What rom where you on before installing the new kernel?
tudeine said:
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing
Click to expand...
Click to collapse
Hello.
ROM type
nokiamodeln91 said:
What rom where you on before installing the new kernel?
Click to expand...
Click to collapse
Am sorry to say but I have no idea which rom I was using, this was my first time rooting, a friend of mine bought me this phone on a visit to china, and so I believe it was the custom rom.
And I remember it was running version 4.1.2 of the Operating system, am sorry am making it difficult to get help, but a gud learning lesson, please help.
tudeine said:
Am sorry to say but I have no idea which rom I was using, this was my first time rooting, a friend of mine bought me this phone on a visit to china, and so I believe it was the custom rom.
And I remember it was running version 4.1.2 of the Operating system, am sorry am making it difficult to get help, but a gud learning lesson, please help.
Click to expand...
Click to collapse
As far as i remember there is no franco kernel for jb 4.1.2. That's why your phone cannot boot.
The worst is flash back a stock rom unless you remember your firmware version then you can flash philz kernel
Philz kernel/stock rom
Rosli59564 said:
As far as i remember there is no franco kernel for jb 4.1.2. That's why your phone cannot boot.
The worst is flash back a stock rom unless you remember your firmware version then you can flash philz kernel
Click to expand...
Click to collapse
Ok, thanks for the help so far, I have been reading different threads about the stock rom and philz kernel,
I could not identify my stock rom, am wondering could you be knowing stock rom for the gt-i9220 if yes, please pass me the link where I can download it.
I wanted to try out that n if it does not help I can go for philz kernel.
tudeine said:
Ok, thanks for the help so far, I have been reading different threads about the stock rom and philz kernel,
I could not identify my stock rom, am wondering could you be knowing stock rom for the gt-i9220 if yes, please pass me the link where I can download it.
I wanted to try out that n if it does not help I can go for philz kernel.
Click to expand...
Click to collapse
try flashing any of the JB version of Philz kernel like DDLSC using recovery of franco kernel. You should be able to get into CWM recovery,
power failure
nokiamodeln91 said:
try flashing any of the JB version of Philz kernel like DDLSC using recovery of franco kernel. You should be able to get into CWM recovery,
Click to expand...
Click to collapse
I guess ma problems are too many, after downloading philz kernel and transferring it to an external memory card, I cannot get into the recovery mode which I were able to get to 2 days back.
I did not do anything else from the day I was trying to root and things back fired, I thought the battery had been used up but even after charging I get nothing apart from the phone being warm, when I insert the charger all I see is a battery with a circle that flashes and disappears, flashes and disappears.
Any ideas or this marks the end of this gadget
Download mode? If yes then you can flash a rom using Odin or flash Philz kernel also using Odin.. If no.., you may need to try a charged battery.
Black screen
nokiamodeln91 said:
Download mode? If yes then you can flash a rom using Odin or flash Philz kernel also using Odin.. If no.., you may need to try a charged battery.
Click to expand...
Click to collapse
I guess I have to look for a charged battery, odin cannot read the phone, however I would like to know when I unzip philz kernel folder, there are other files and I understand odin(never used it before) has options like partition,auto reboot, F.time, Boot loader,PDA, phone, csc
I need to know which ones should I select, and if am using PDA which file from extracted philz kernel do I select.
tudeine said:
I guess I have to look for a charged battery, odin cannot read the phone, however I would like to know when I unzip philz kernel folder, there are other files and I understand odin(never used it before) has options like partition,auto reboot, F.time, Boot loader,PDA, phone, csc
I need to know which ones should I select, and if am using PDA which file from extracted philz kernel do I select.
Click to expand...
Click to collapse
For flashing Philz kernel using odin you need to use .tar file instead of .zip file. Also no need to extract anything from .tar file. Leave everything in odin as it is and put the .tar file in PDA section, if at all odin can detect your phone. remember, this needs to be performed in download mode.
I made it
treacherous_hawk said:
For flashing Philz kernel using odin you need to use .tar file instead of .zip file. Also no need to extract anything from .tar file. Leave everything in odin as it is and put the .tar file in PDA section, if at all odin can detect your phone. remember, this needs to be performed in download mode.
Click to expand...
Click to collapse
Thanx so much man, thanks a bunch, I can say the phone is up and running, however, everything is in Chinese, I do not Chinese, I cannot tell what the words mean, but all I know the philz kernel procedure using odin has worked.
now I need help to change the language, did I download the wrong kernel,
this is what I used: PhilZ-cwm6-DDLSC-ODD-4.93.6.tar,md5
Another problem I have observed, when you switch on the device it brings a yellow triangle with an exclamation mark in the middle
tudeine said:
Thanx so much man, thanks a bunch, I can say the phone is up and running, however, everything is in Chinese, I do not Chinese, I cannot tell what the words mean, but all I know the philz kernel procedure using odin has worked.
now I need help to change the language, did I download the wrong kernel,
this is what I used: PhilZ-cwm6-DDLSC-ODD-4.93.6.tar,md5
Another problem I have observed, when you switch on the device it brings a yellow triangle with an exclamation mark in the middle
Click to expand...
Click to collapse
Do you mean everything is in chinese in recovery or it boots up to home screen and there everything is chinese? You can leave the yellow triangle alone, first get it working once it does you can use triangle away app from xda or play store to remove it.
Sent from my GT-N7000 using Tapatalk
working
treacherous_hawk said:
Do you mean everything is in chinese in recovery or it boots up to home screen and there everything is chinese? You can leave the yellow triangle alone, first get it working once it does you can use triangle away app from xda or play store to remove it.
Sent from my GT-N7000 using Tapatalk[/QUOTE
What I meant, the phone boots up to home screen but everything was in Chinese, however, I managed to change the language to English, now the phone is working I can receive and make calls,browse, I have the supersu icon (I do not know what it does) on my home screen and some icons are in Chinese, I still don't have play store, and I still have the yellow triangle.
Below are my phone details now:
model nmbr: GT-N7000
android version:4.1.2
baseband: I92220ZCLSG
KERNAL VERSION: 3.0.31-906407
BUILD NUMBER: JZO54K.I9220ZCLSG
DO I HAVE TO CHANGE, OR THIS IS OK
Thanx so much mean while atleast its now up and running
Click to expand...
Click to collapse
I think the Chinese version didn't have playstore and all. You may need to flash a rom of n7000 to get all the access..