Related
Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
dai123 said:
Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
Click to expand...
Click to collapse
Is it possible you flashed the wrong FW? After flashing was the tab able to reboot?
Try wiping cache and do a factory reset. Volume-up+powerbutton. You will see in the middle of the screen a little triangle. Then push the volume-up button again. Then you will be in the recovery-mode. There choose wipe/cache and the wipe-data/factoryreset.
If that not helps try flashing another FW. The Rot-hammer i.e.
Fixed it!
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Question
dai123 said:
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Click to expand...
Click to collapse
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
unanony said:
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
Click to expand...
Click to collapse
please tell me what firmware you flashed...please im stuck and depending on what firmware i flash i can hear it start but still blank screen
Same black screen
I can get Odin to recognize my tab, windows 7 can see it and I can flash to it, but the screen is black all the time.
Has anyone had any luck?
What do samsung use to fix this? I've seen a repair/service program from ZTE for some of their devices that I believe was procured from an employee of ZTE. Maybe there is something like that around?
<edit>
I also flashed a rom from samfirmware, so I guess the issue is a locked bootloader from a stock rom. Anyone know how to fix this?
I too am having this issue with sawfiremware image.
i can can tell i am in download mode but i am unable to flash the EA24 firmware.
Anything that can be done?
Thank you!!
My Tab's screen won't turn on at all, even when plug-in, even that Odin said that flash was successful. But after connecting it to PC with Odin opened (Odin recognized it), loaded all files needed for flash in Odin, I pressed HOME+Volume Down + Power, the device auto-dismounted from PC, and reconnected again, I pressed start in Odin and after finishing updating firmware, the screen was working again.
Good luck to everybody! I'm happy now
what firmware did you use? thx
HELP
hello guys i have the same problem can you please help me out on how to fix it?? my screen is black and i only have the 4 white buttons up, please i need some serious assistence
Blank Screen after installing firmware same firmware
hey guys, could you lend me some help here , my tablet is samsung galaxy tab 7.0 Plus , i installed android 4.12 jelly bean , but it was 3.2 honeycomb before i upgraded to 4.12 jelly bean ,well , i'm proud of it , its smoother then the honeycomb but after a few months , my tablet suddenly just displaying a samsung logo for .... forever .. i downloaded the firmware from samsungupdate.com and i probably understand it's because the rom , i flashed the rom using Odin 3,07 with 4.12 jelly bean firmware that for indonesia region , here's the version of the firmware that i flashed to my tablet "P6200XXMD6_P6200OLBMD5_P6200XXMC3_HOME.TAR.MD5 " please note that my tablet can't open/show the recovery system , it just went black when i went to recovery system , soo i just flashed the rom again , it's because the tablet just showing samsung logo forever , never goes to window , and i flashed the rom with similar firmware but not for the indonesia region , the international one , andd after i flashed , it successfully install the same firmware ( 4.12 jelly bean ) well , it's fix the frozen samsung logo , but after it's showed the samsung logo , it just showed a blank screen of dead , the installazation is success but not fixed my tablet , well i still cant open the recovery mode, it's just showed a blank screen just like before i flashed the same firmware , PLEASE help
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
priyana said:
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
wut ?? isn't this the galaxy tab forum ... it thought i can ask a question here , but thanx anyway
Yeah. Galaxy Tab. You know, the 7" original. GT-P1000. Not at galaxy tab.
Sent from my GT-N7100 using XDA Free mobile app
Hello Everyone, I'm from Nepal. I have also same problem after few days. I search in google and YouTube also but not solve my problem. then i use my technical ideas on SM T561 tab, and I'm Shocked its open and working properly. if you also want to do that plz download Miracle Thunder 2.82 and Odin. install Miracle thunder and open, connect your Samsung tab with pc or laptop, on Miracle Thunder choose Samsung button, scan you Samsung port, model> Auto detect, mode > download, then select factory reset and click Go and wait. now your tab download mode then go to Odin and flashing your Samsung tab original firmware from website and flashing your tab. 100% its work. Thank you and sorry for my poor English.
https://www.facebook.com/softktm
I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!
Please HELP!
EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.
I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.
EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.
I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...
Up?
What can i do? Is a batterie problem?
Let your Tab charging for 5 Hours and then try again.
Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "
HELP please? Can i do a custom jig for the galaxy tab? And How?
press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min
suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.
Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead
Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App
I've been having many problems with updating my Captivate to Froyo using Samsungs' Kies Mini. I'm up to the point in where it downloads the new firmware, then when it's done it says that it cant be upgraded. My phone isn't rooted and I used Odin to return back to stock. Any ideas?
Check to make sure that usb debugging is enabled I just had the same problem and that fixed it
Sent from my SAMSUNG-SGH-I897 using XDA App
Tried it, but still didn't work.
Edit:
Just thought I throw this out there, mounting it while in debugging mode doesn't work either.
You need to be in download mode at that point.
connect USB to Computer
remove battery from phone
replace battery
hold down both volume buttons
insert micro USB into phone
*Download Mode!*
Hope that helps.
I dont think you have to go into download mode. Kies doesn't recognize it.
clemmie knows what he's talking about. worked for me first time.
When would I go into download mode? And sorry for doubting you
when it tells you to.
The thing is when it's done downloading the update, it says that my phone cant be updated and to take out the battery, put it back in, and try again.
Hi:
I was wondering if there is anywhere that the update can be downloaded and then installed through Clockwork.
Thanks!
Master Clear on Odin not working
I have looked and have tried everything to get the Master Clear on Odin to revert to 2.1 and it doesnt work, anyone have any suggestions? I have been trolling the forums and still no such luck.
NickandBob said:
I have looked and have tried everything to get the Master Clear on Odin to revert to 2.1 and it doesnt work, anyone have any suggestions? I have been trolling the forums and still no such luck.
Click to expand...
Click to collapse
master clear cannot revert your phone to 2.1 if you are on 2.2. you need to use odin to flash back.
I upgraded from 2.1 to 2.2 through Mini Kies, I must have missed some step or it is not updated completely.
On restart on the phone, it hangs at the Galaxy S startup screen. If have to press the Power button to bring up the HOME screen
Cannot connect to Market any longer
It is very slow as well
Steps used to update 2.2
Installed Mini Kies on my system
Upgrade option was used, SGH went into download mode, installed and restarted, but did nothing after that
I removed the battery inserted it back, also used the VOL buttons to go into DOWNLOAD mode
It did nothing in the download mode, had to remove the batter again and restart after waiting for a while
It shows FIRMWARE version as 2.2.
Have I missed any step, any suggestions?
I have a Verizon Galaxy Tab 7-inch with WiFi and 3G running Android 2.2 (Froyo). I mistaking tried to flash the new Android 2.3.3 before realizing it was only for GSM phones. I followed all the instructions using Odin3 (1.7) and everything looked like it worked except it never rebooted and I never got it into the Recovery Mode. I was still able to get in Download Mode so I tried to find a compatible 2.2 ROM to flash. I flashed the Roto JME rom, it didn't reboot. I flashed P1000NUBJM2_P1000NUBJM2_P1000NUUBJM2_HOME and it didn't work. Odin3 seemed to install these, I always got PASS. Now my Tab is totally unresponsive. Odin3 acts like it's installing but I can't get the Download Mode screen anymore. How do I get it back to factory or some working system? I don't expect to save anything I've loaded, I just want it to work again. HELP. Thanks.
P.S. If I can't fix this, who do I take it to to re-install the system? I got it from Verizon.
Can you get it into recovery mode? (Turn off, then Power + Volume UP)
No success
No, nothing I do will show anything on the display. I can't get into Recovery Mode or Download Mode. However, when I'm hooked to the computer and press the correct buttons to turn on/off or Download Mode, I hear the computer beep indicating it sees the USB and the yellow COM widget in Odin3 lights up and says it's up and in Download Mode. I can then flash it and it says PASS. I also just tried Heimdall and it also seemed to successfully flash the original Verizon SCH-I800_VZM firmware. Nothing displays when I try to go into Recovery Mode. I don't even see the picture of the battery when I plug it into the wall. Have I somehow trashed by screen?
Hi ! I got the same problem and now my Tab totally bricked...
Samsung just needs to give us the files and software to load these tabs back to stock! That would end the return issue for the carriers and let us unbrick them. Like any other device, there is a way to fix it without having to send it back.
Sent from my ADR6400L using XDA Premium App
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
Flash a desired firmware from Sammobile. using odin
Make sure that pit file is used
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
you can reconnect it to kies, as it is still on download mode to do recovery like this
http://www.4shared.com/office/koYpRWc1/KIES_update_recovery.html
re you can download a firmware according to your location and flash with Odin
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
are you able to get into download mod or totally not boot up at all
The only solution si to flash a new firmware using odin
Sent from my GT-I9000 using xda app-developers app
Go back to the original India ROM - https://www.fixmystuff.in/FMS_Forum/threads/samsung-galaxy-s-gt-i9000-flashing-to-original-rom.46/
i update my phone using odin with pit file .
now phone not starting any help..
AW: Phone not booting after failed firmware upgrade-urgent
same screen as before?
now phone not booting up at all..
AW: Phone not booting after failed firmware upgrade-urgent
sorry but i'm no expert :/
Does Odin show a connection?
Maybe you can build a so called JIG.
same issue
Hi,
I am in same situation. did it get resolved?
I have GT I90003 which is now not booting and remaining on 'Phone-I-PC' image.
I was using Odin to root but in between cable got disconnected. and now I am nowhere.
Please help how to resolve this problem.
Thanks,
Bhupendra.
see here for firmware n juz change usb port if needed
http://forum.xda-developers.com/showthread.php?p=14933114
or use DDLF1 or DDMF2. Search it using search box in xda.
n dont use i9000 rom for i9003 rom, it will hardbrick ur device, u can search for i9003 post discussiom using searchbox in xda
Sent from my GT-I9000 using xda premium
i have the same problem
i was trying to update my phone and the cable usb move now i have just a black screen with a phone icon + triangle alert+ computer icon. And the problem is that my cellphone doent connect with the computer.
is a samsung s captive. could you help me
Zaddiel said:
i was trying to update my phone and the cable usb move now i have just a black screen with a phone icon + triangle alert+ computer icon. And the problem is that my cellphone doent connect with the computer.
is a samsung s captive. could you help me
Click to expand...
Click to collapse
You have to try again to get it into download mode.
Use Odin for your device model and run it as administrator. If Kies is installed, kill all Kies processes by using Task Manager. Prepare the files under PDA etc. Pull out the battery and hold power button pressed for 1min. Then keep all buttons combo for download mode and insert the battery while pressed (needs some acrobacy skills). If the download mode starts, you can connect your phone and flash firmware again.
tetakpatalked from Nexus 7 flo
thank you
tetakpatak said:
You have to try again to get it into download mode.
Use Odin for your device model and run it as administrator. If Kies is installed, kill all Kies processes by using Task Manager. Prepare the files under PDA etc. Pull out the battery and hold power button pressed for 1min. Then keep all buttons combo for download mode and insert the battery while pressed (needs some acrobacy skills). If the download mode starts, you can connect your phone and flash firmware again.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Thanks it really works
Zaddiel said:
Thanks it really works
Click to expand...
Click to collapse
Great, mate
BTW, hitting the thanks button would do more than words
tetakpatalked from Nexus 7 flo