Hi guys, i've recently bought 2 Milestones (A853) with software issues (both for US$30) and decided to flash some roms. both units are 90.78 BL,
but one was on eclair while the other was on froyo.
the eclair one is now running CM7, the process of flashing the vulnerable recovery went fine.
the other one...
when it boots on the recovery, it stays on the ! triangle and doesn't matter which buttons i press its doesn't shows me the menu itens... i don't think that was a problem with the buttons, since the day it arrived i went to recovery and wiped...
there's any sort of incompatibility of the updated 2.2 and the vulnerable recovery? it's ok to flash a 2.1 sbf now?
there's something i could do using adb? reboot recovery only goes to the same screen... there's a way to start a update.zip flash from adb?
thanks!
The latest official update should be fully compatible with the vulnerable recovery method.
Try flashing a 2.1 sbf, check all hardware keys for functionality and try again.
well i think my camera button is to blame.
but searching (thru google) i came to this topic here on xda:
http://forum.xda-developers.com/showthread.php?t=1833992 that teached me how to start an update.zip
one of the issues is that 2.2 was an OTA so it had install-recovery.sh flashing a non vulnerable recovery on every start
flashed a retail eclair sbf then a flashed vulnerable recovery sbf and let the system boot normally. Had it rooted and went superuser on terminal thru adb shell (don't know if it is important to be su, when i ended that i noticed that i was su)
you should have already on the root of SDCARD Openrecovery folder and the update.zip of OR
Code:
su
# mkdir /cache/recovery
# echo "--update_package=SDCARD:update.zip"> /cache/recovery/command
#reboot recovery
after the last line milestone will be down and boot in recovery and start updating.
hope that helps someone with issues on the recovery menu, that does nothing except showing the Yield sign or phones with dead buttons...
where i need to use those codes?
you use on ADB thing?
or some other program?
or on the phone?
tks! ^^
using adb...
activated USB debugging on settings, then on computer went to adb shell.
Related
Hi guys. I don't really know what happened here. I've flashed a few different versions of Cyanogen's builds onto my MT3G without any problems. Today I flashed the official 1.6 dev build of Donut before doing Cyanogen's 4.2.3.1 flash. Well, the 1.6 seemed to go smoothly, but after the reboot, the recovery would no longer load. It's now giving me a picture of the phone with an exclamation point when I try to load the recovery.
How can I fix this? Anyone? Please?
taken from cyanogens website site instructions.
If you boot the 1.6 image it will install the HTC stock recovery. Booting back to recovery will show the /!\[] symbol. THIS IS NOT LOSING ROOT. You can still flash update.zip files from this recovery. Also, you can still flash a nicer (CM-1.4) recovery with fastboot, or flash_image inside the CM install once you get it installed.
thats what sounds like happen to me
How do I do anything though? I don't have the ability to do anything, it just sits there on that screen.
<edit> Also, I can't re-flash the recovery. I've tried, but it gives me the error:
Flash FAILED: The command could not be run
After figuring out how to install ADB and trying to fix it via that, it appears that I have somehow lost root. It's giving me Permission Denied or remote device not allow when I try to flash or use fastboot.
Got it fixed. Took me forever, but I made a goldcard and flashed with the stock ROM. Now I'm good to go again after installing CM recovery 1.4.
hey guys i finally finished unlocking the bootloader on my 2.2.1 FRG83D build N1 but i couldnt get recovery.img to push to the N1 through adb.second option was to run "install-superboot-windows" for FRG83D build on bootloader screen from PC,soon as i did that N1 booted to the phone and i checked in the app menus and i have the latest "SUPERUSER" app.i really want to flash custom ROMS now.DO I HAVE RECOVERY or how do i get recovery now cuz i really wanna get started with flashing custom roms.any suggestions would help.thanx
1. Get a teminal emulator from the market and reboot recovery. or
2. Get quick Boot from the market and install/use that to boot into recovery or
3. Power down the phone and push the trackball+power to boot into recovery
If none of those 3 options work for you, your recovery did not flash and you will need to either reflash it. (making sure fastboot sees your phone with fastboot devices)
Or you could download ROM manager from the market. Using that, you can install clockwork recovery from the app itself.
Know-Fear said:
1. Get a teminal emulator from the market and reboot recovery. or
2. Get quick Boot from the market and install/use that to boot into recovery or
3. Power down the phone and push the trackball+power to boot into recovery
If none of those 3 options work for you, your recovery did not flash and you will need to either reflash it. (making sure fastboot sees your phone with fastboot devices)
Or you could download ROM manager from the market. Using that, you can install clockwork recovery from the app itself.
Click to expand...
Click to collapse
i dont think i have any recovery,i just tried installing clockwork recovery and try to get in the recovery,it froze my N1 and i had to hard reset the N1.
Flash the recovery via fastboot, not adb...
Sent from my Nexus One using XDA App
Alright, I give up.
I've wasted one full day and all I do is keep going in circles. I have an unlocked bootloader but I am not able to flash custom recovery to it. When I do:
fastboot flash recovery recovery-RA-passion-v2.2.1.img
it is successful but am having the problem mentioned here:
"Make sure that init.rc isn't calling any install-recovery.sh script, otherwise you'll boot back to stock recovery (exclamation mark with a little Android)."
http://forum.xda-developers.com/showpost.php?p=10467058&postcount=1638
So, no custom rom because I cant turn off verification in order to flash custom rom zip file. Now the problem is that I can't even fix this problem because I don't have root so I can't delete the following files:
/system/etc/install-recovery.sh
/system/recovery-from-boot.p
When I try adb shell it keeps saying "permission denied"
It gets better - I've managed to mess things up royally even further. I tried flashing FRG83 system image using "flashboot update update.zip". It was successful but now my phone is going in boot loop!!
Can someone please help me before I lose hope in humanity?
Recovery is only restored when you boot into system, so the idea is that you flash recovery, and go straight into it via the on phone menu, and then install what you need to...
You can either flash a pre-rooted GB, flash the su.zip and then you'll have su access to delete the files when in system or adb, or flash this zip which will remove the two files...
http://db.tt/cp7De8G
Sent from my Nexus One using XDA App
danger-rat said:
Recovery is only restored when you boot into system, so the idea is that you flash recovery, and go straight into it via the on phone menu, and then install what you need to...
Click to expand...
Click to collapse
I totally did not know this. Thanks a lot buddy
hi there every one i updated my nexus one to 2.3.6 (GRK39F) from stock 2.3.4 (GRJ22) sorry but i did not read the post for to upgrade and keep root before upgrading to 2.3.6 and now i am suffering and thought it is not a good idea to post a question there so posting here
my problem is when i upgraded 2.3.6 i was rooted and had clockworkmod recovery image and i had a backup from rom manager as well but before upgrade i wiped the partition and cache and after upgrade i dont have SUPER USER permission nor the clockworkmod recovery tried to flash su.zip from sd card but no luck please can anyone help me get my root back pleaseeeee i need help ....
You'll have to passimg back to an earlier version of Froyo, root, restore your backup, and then flash the update and su zip...
danger-rat said:
You'll have to passimg back to an earlier version of Froyo, root, restore your backup, and then flash the update and su zip...
Click to expand...
Click to collapse
Thankyou very much danger-rat really appriciate your help but today was a bit lucky day for me
I tried to flash a recovery image through ADB and then it went well and then flashed the su.zip from sdcard that gave me superuser permission again thanks again for your help
@0mpranav
No need to flash the system partition, no need to use ADB, just flash Superboot:
Code:
https://bexton.net/2011/09/24/root-access-for-nexus-one-on-android-2-3-6-grk39f-superboot/
If your bootloader is unlocked all you have to do is reboot into fastboot mode. Flash a custom recovery such as RA or CWM, reboot directly into revovery and flash su.zip or whatever flash zip you used to root your device before. Reboot and you are rooted once again.
The following thread has a step by step how to do it. It's fast and easy.
http://forum.xda-developers.com/showthread.php?t=1019759
jboxer said:
If your bootloader is unlocked all you have to do is reboot into fastboot mode. Flash a custom recovery such as RA or CWM, reboot directly into revovery and flash su.zip or whatever flash zip you used to root your device before. Reboot and you are rooted once again.
The following thread has a step by step how to do it. It's fast and easy.
http://forum.xda-developers.com/showthread.php?t=1019759
Click to expand...
Click to collapse
Yup. This is the way every one should be doing it. It's sort of the whole point of the Nexus One. It has an unlockable bootloader.
GldRush98 said:
Yup. This is the way every one should be doing it. It's sort of the whole point of the Nexus One. It has an unlockable bootloader.
Click to expand...
Click to collapse
I have purchased two second hand Nexus Ones. The first thing I did after receiving them and charging the battery was to reboot into fastboot mode and issue "fastboot oem unlock" command. Since they were purchased second hadn I didn't thing I had a warranty anyway so unlocking the bootloader seemed to be a non brainer.
GldRush98 said:
Yup. This is the way every one should be doing it. It's sort of the whole point of the Nexus One. It has an unlockable bootloader.
Click to expand...
Click to collapse
Will any version of su.zip, and fastbook.zip work? What about recovery-RA-passion-v2.2.1.img? or should we be using a different version?
If we should be using different versions of those, could you link to where we could get them?
I've had my Nexus one half-rooted since 2.3 came out, and I haven't been able to root it back.
why mess with 2.3.6 just use oxygen 2.3.7...
kuljit55 said:
why mess with 2.3.6 just use oxygen 2.3.7...
Click to expand...
Click to collapse
I'm sorry I have no idea what that is. I don't even know if its helpful at all. Again, I don't even have root, or a custom recovery. Presently, I have an unlocked bootloader, ADB on my PC, and a half-rooted nexus one from before 2.3.
I have absolutely no idea how to do anything presently, and when someone tells me that trying to root on 2.3.6 is futile and to just use a custom update, it doesn't make any more sense to me.
Care to elaborate past one line that doesn't help at all? Hell when using shell commands through adb, it keeps on saying "permission denied" any time I type in su.
You have an unlocked bootloader, so flash a custom recovery via fastboot, and use the custom recovery to flash the su zip...
danger-rat said:
You have an unlocked bootloader, so flash a custom recovery via fastboot, and use the custom recovery to flash the su zip...
Click to expand...
Click to collapse
Thanks Danger-rat. Although I know you said nothing different that what was already said in this thread, I figured that since you didn't give me specific info about whether or not there were multiple versions of su.zip or fastboot.zip, I figured I should take that as a "No.", so I went for it. All re-rooted now.
I appreciate the help.
EDIT: So if you are as new to this stuff as I am, anyone else who's reading-
You can DL su.zip from http://www.google.com/url?sa=t&sour...ZxOuf9Kw_URvtvh9Q&sig2=Hj72LDNoiBq2Zoa4QquZWQ
and fastboot.zip from http://www.mediafire.com/?ttdkgamud3j
and amon Ra 2.2.1 from http://files.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-passion-v2.2.1.img
then follow the directions here: http://forum.xda-developers.com/showthread.php?t=1019759
** Note: again, these are for people who have unlocked bootloaders. For that info, you'll have to go elsewhere, but it should be readily available, such as this stuff is. I'm just linking it again because I know how frustrating it can be for people like me who aren't too well versed in rooting/unlocking yet.
Downgrade 2.3.6 to 2.2.2 - Nexus One
Problem:
I would like to downgrade my Nexus One to 2.2.2, because I've had non-stop problems with Gingerbread.
So I've gone through the Bootloader -> Recovery -> apply sdcard:update.zip steps, and it fails. This begs the question, how do I go from 2.3.6 to 2.2.2?
Fix:
Generally, phone manufacturers will not allow you to downgrade for various reasons. The stock recovery does indeed validate the update image, so that it's of a greater (or same) version than the installed system. With the Nexus One being a developer phone, you can unlock the bootloader and replace the recovery image with the one that doesn't perform this check, and will allow installation of any image. The caveat is that unlocking the bootloader voids your warranty with the carrier (and sometimes the manufacturer too,) and wipes all user data off the device.
Unlocking the N1 is dead easy. Just install Android SDK and the USB drivers (located in "google-usb_driver" directory.) Then restart the phone in bootloader mode by shutting it off and powering on while holding down the trackball, hook it up to the computer via USB, and in command prompt issue the following command: C:\<path to Android SDK>\tools\fastboot oem unlock. You will be presented with a confirmation screen with further instructions. Upon successful unlock, you can flash a custom recovery that will allow you to install any custom ROM, including downgrade to 2.2.x stock version of Android OS.
To flash ClockworkMod recovery, download the latest version for Nexus One from here, reboot into bootloader mode (power on while holding the trackball down,) and in command prompt issue command C:\<path to ANdroid SDK>\tools\fastboot flash recovery C:\<path to downloaded img>\recovery-clockwork-3.0.0.5-passion.img
Reboot to bootloader mode again, and then use the Volume keys to highlight the "Recovery" option and press Power button. You are now in ClockworkMod recovery, and can flash any custom ROMs via the "Install zip from sdcard" option.
Here is a "stock" 2.2.2 ROM (with root) off XDA-developers forum.
http://forum.xda-developers.com/showthread.php?t=927935
source:http://android.stackexchange.com/questions/13933/downgrade-2-3-6-to-2-2-2-nexus-one
Try It & Report Back...
I had a mostly-stock Nexus 7 running 4.1.1 - unlocked, rooted, TWRP installed, but no major /system changes. When the update came in, I figured "what the heck, I'll just see if it applies - worst case I lose root and my recovery console, but it's a nexus, it's easy to get those back". I applied the update, and it worked! It applied and rebooted, worked fine - but it did lose root and recovery as I expected.
So I tried to get recovery back. It won't come back. Here are the ways I tried:
Hold down VolUp+VolDown+Power to get to fastboot mode. Ran
Code:
fastboot boot recovery.img
(using a number of different copies of both clockwork and TWRP recovery). Each time, the screen went black, google logo came up, but then it booted to AndroidOS
Tried to do
Code:
fastboot flash recovery recovery.img
The flash seemed to look like it did fine, but when I selected "Boot Recovery", it didn't. It booted Android OS
I can get into STOCK recovery using the normal method of selecting it from the menu just fine.
Stock recovery doesn't have ADB running. Fastboot mode doesn't have adb running. Fastboot doesn't have any command for rebooting into recovery apart from the method I mentioned (fastboot boot recovery.img). Booting into AndroidOS reflashes the recovery console with the stock console (I tried to race it running adb reboot recovery, but lost).
I tore my hair out for hours. Nothing I tried would let me boot into a custom recovery. I eventually backed everything up as best as I could using adb (Since luckily Android OS still worked), and reflashed to stock everything. PROBLEM IS STILL HERE! Then I decide to revert the bootloader from 3.41 to 3.34. SUCCESS. 3.34 booted to recovery without any problems at all.
Any idea what the heck is going on here? Anybody else seen this? All the threads I've seen with people having problems booting into recovery end with somebody suggesting "Just get app xyz that will reboot into recovery" - but that is NOT an option if A). you cannot get it to boot or B). you are not rooted/are running stock, because you can't be in AndroidOS and still have the custom recovery flashed UNTIL you are able to get into recovery to actually fix it.
Here's a video of me trying to flash recovery, since nobody will believe me that it doesn't work. Turn off the audio, the bell noise is obnoxious, sorry.
http://www.youtube.com/watch?v=zhHWiu7pO34
I brought up the same concerns when I did a manual flash to 4.1.2 and went through a mess eventually reverting to 4.1.1, using OTA rootkeeper than updating again because on bootloader 3.41 *NO* custom recoveries successfully boot.
how do you flash the old bootloader? if you don't mind me asking.
I have been on boot loader 3.41 for a few days and no issues with twrp. I have flashed a few things since and all is good? Sorry not sure why its not working for some.
ls3c6 said:
I brought up the same concerns when I did a manual flash to 4.1.2 and went through a mess eventually reverting to 4.1.1, using OTA rootkeeper than updating again because on bootloader 3.41 *NO* custom recoveries successfully boot.
Click to expand...
Click to collapse
Huh? I have 3.41 and can go from bootloader to recovery with no problems. Even got a video of it if you don't believe me
Sent from my Galaxy Nexus
You are not alone in this issue, me too, and others more, http://forum.xda-developers.com/showthread.php?t=1932063
I update to 4.1.2 using CWM, didn't lose root. Then changed back to TWRP 2.2.2.0 with bootloader 3.41, now I just updated to TWRP 2.2.3. Everything went smooth even though I'm android noobie.
anotherxyz said:
how do you flash the old bootloader? if you don't mind me asking.
Click to expand...
Click to collapse
Code:
fastboot flash bootloader bootloader-3.34-grouper.img
(or whatever the actual filename is). Then you do:
Code:
fastboot reboot-bootloader
You should at that point see the correct version listed in fastboot
masully84 said:
Huh? I have 3.41 and can go from bootloader to recovery with no problems. Even got a video of it if you don't believe me
Click to expand...
Click to collapse
I think the issue comes from going back to stock recovery without a rooted AndroidOS. Either one by itself seems to be fine. If you still have the CWR or TWRP recovery already flashed, 3.41 can boot to that. If you have root in AndroidOS, you can always re-flash recovery from ROM Manager or something, and that will work fine. And you can boot to recovery from Android OS (so long as you have root).
If you have stock recovery and no root, your only option is fastboot. And that fastboot flash and boot commands do not work. They look like they work - but they don't. So if you already HAVE a custom recovery, it probably won't even break it.
If you really want to do a proper test / prove this, go back to stock recovery with 3.41. Turn the tablet off completely. Boot up holding the three buttons and go into recovery to see that it can go into the stock recovery console. Then reboot with the three buttons again (don't boot AndroidOS), and run the fastboot boot command to run a custom recovery. If that works, I'll eat my hat.
(well, really all that means is that the problem isn't occurring on all systems. Doesn't mean it's not happening to me and many others)
The problem might not be that 3.41 can't boot to recovery -it might just be that 3.41 can't FLASH or BOOT a recovery console through fastboot. Many people will never notice that because:
A). They already have a recovery console flashed, so it still works
B). They flash their recovery from ROM Manager, GooManager, or whatever
If you lose root, you no longer have B as an option. If you also lose your recovery console, you can't get root access back without fastboot, so you have to use fastboot.
Se7enLC said:
Code:
I think the issue comes from going back to stock recovery without a rooted AndroidOS. Either one by itself seems to be fine. If you still have the CWR or TWRP recovery already flashed, 3.41 can boot to that. If you have root in AndroidOS, you can always re-flash recovery from ROM Manager or something, and that will work fine. And you can boot to recovery from Android OS (so long as you have root)[...]
[/QUOTE]
Not sure you've got it right. At least on my N7. My first try was flashing the update.zip in another thread without updating my ROM at all. Running Paranoid Android (2.1799 then) and TWRP. Not sure when in the mix I updated TWRP though.
Thought it might have been a problem with the update.zip, so downloaded the full update.zip from google and tried installing bootloader*.img from that via fastboot.
No change. Reverted to 3.34 without any playing around with deleting files and all is good.
Click to expand...
Click to collapse
Se7enLC said:
I had a mostly-stock Nexus 7 running 4.1.1 - unlocked, rooted, TWRP installed, but no major /system changes. When the update came in, I figured "what the heck, I'll just see if it applies - worst case I lose root and my recovery console, but it's a nexus, it's easy to get those back". I applied the update, and it worked! It applied and rebooted, worked fine - but it did lose root and recovery as I expected.
So I tried to get recovery back. It won't come back. Here are the ways I tried:
Hold down VolUp+VolDown+Power to get to fastboot mode. Ran
Code:
fastboot boot recovery.img
(using a number of different copies of both clockwork and TWRP recovery). Each time, the screen went black, google logo came up, but then it booted to AndroidOS
Tried to do
Code:
fastboot flash recovery recovery.img
The flash seemed to look like it did fine, but when I selected "Boot Recovery", it didn't. It booted Android OS
I can get into STOCK recovery using the normal method of selecting it from the menu just fine.
Stock recovery doesn't have ADB running. Fastboot mode doesn't have adb running. Fastboot doesn't have any command for rebooting into recovery apart from the method I mentioned (fastboot boot recovery.img). Booting into AndroidOS reflashes the recovery console with the stock console (I tried to race it running adb reboot recovery, but lost).
I tore my hair out for hours. Nothing I tried would let me boot into a custom recovery. I eventually backed everything up as best as I could using adb (Since luckily Android OS still worked), and reflashed to stock everything. PROBLEM IS STILL HERE! Then I decide to revert the bootloader from 3.41 to 3.34. SUCCESS. 3.34 booted to recovery without any problems at all.
Any idea what the heck is going on here? Anybody else seen this? All the threads I've seen with people having problems booting into recovery end with somebody suggesting "Just get app xyz that will reboot into recovery" - but that is NOT an option if A). you cannot get it to boot or B). you are not rooted/are running stock, because you can't be in AndroidOS and still have the custom recovery flashed UNTIL you are able to get into recovery to actually fix it.
Here's a video of me trying to flash recovery, since nobody will believe me that it doesn't work. Turn off the audio, the bell noise is obnoxious, sorry.
http://www.youtube.com/watch?v=zhHWiu7pO34
Click to expand...
Click to collapse
Found the solution to the the issue (sorta), I too went through all this trouble as you did in your OP.
I did not have to do anything other then straight up flash this version "recovery-clockwork-touch-6.0.1.5.b8147-grouper.img" via fastboot and bam! recovery works. Link - http://forum.xda-developers.com/showpost.php?p=32810167&postcount=228
Problem is with previous versions of 6.0.1.0 (Official) and TWRP 2.3.1
I still prefer TWRP, but hey This is better then the alternative (No recovery at all)
Now we need to figure out what changed between CWM 6.0.1.0 and 6.0.1.5 and get the other guys (TWRP) to fix their **** for us poor saps that seem to be a minority in the Nexus 7 world having this issue.
I would love to know what actually the fix is and why only some have these issues with older versions of CWM and TWRP.