SO I was this weekend to ski and when I came home I couldn't find my usb cable and charger...I have another mini usb cable but it just charging my phone mass storage not working...this is because is not an original usb cable right? Is there any tric or something to make it work?
ilooze said:
SO I was this weekend to ski and when I came home I couldn't find my usb cable and charger...I have another mini usb cable but it just charging my phone mass storage not working...this is because is not an original usb cable right? Is there any tric or something to make it work?
Click to expand...
Click to collapse
if it is charging.....then the pins for the data transfer in the mini-USB cable is not connected.....AFAIK, I think there are no tricks....
one trick is to get yourself a new data cable....
Related
when looking at the storage control panel, it lists internal, sdcard-ext, and then "/mnt/usbdisk_1.1.1" and says "insert an [sic] USB disk for mounting".
so if i were to come up with some sort of adapter, could i plug a thumb drive into my phone's micro usb port to move files between the phone and the thumb drive? i can think of plenty of times that would be useful!
Tried. OTG cable works with Samsung galaxy S2 devices (Skyrocket using either SKY ICS or rooted OTA) but haven't got it to work on our Droids...(Bionic ICS leak, RAZR ICS OTA, Droid 4 ICS OTA...all rooted).
But if someone can prove me wrong I'd be happy to "eat my words" ...
Be strong and very Koragus, my ninja...
OTG works, BUT only in a very cumbersome way, since external power is needed.
A powered USB hub does not suffice, since it only powers the slave devices, not the host (= phone). The phone must be in charge-mode, which requires a Y-cable.
You need:
- an OTG adapter
- a USB hub with mini-USB in
- a USB Y cable with 2 normal USB plugs and one mini-USB out
Then
1. Connect the OTG adapter to your phone's micro-USB input
2. Connect the 'middle' USB plug of the USB Y cable into the OTG adapter
3. Connect the 'outer' USB plug of the USB Y cable to a charger (can be a portable battery as well)
4. Connect the mini-USB plug of the USB Y cable to the hub output
5. Connect any device you want to use to the USB hub
It looks like this (found this picture for Razr):
http://www.flickr.com/photos/teppan_hakushaku/6817735705/
Edit: I verified it for Droid 4 last week, but didn't take my own picture yet. Works with ICS .215 leak, no 3rd party apps (like 'StickMount') seem to be needed.
Edit2: According to some other posts in this forums (search for 'OTG') it will only work for FAT32 formatted drives. Didn't check this in detail but my drive was already FAT32. Also I found it did not work for my cheap wireless keyboard's USB dongle, but connecting a wired keyboard worked fine.
...reminded again why I love this community...
...no possible links to a purchase of this "y" cable?
Be strong and very Koragus, my ninja...
Glad I could help!
They come with some portable harddisks, so that's where I got mine. Not sure about the linking policy on XDA, please remove if not allowed. Here's an example:
http://www.dealextreme.com/p/usb-2-0-mini-5-pin-to-a-male-power-y-cable-62-cm-65630?item=10
Hi friends,
I want to attach to my touchpad memory card reader and external hard drive.
I wonder if it will be possible instead of buying Y cable and connect it to the OTG, to use my existing USB hub and connect to him the devices and the external battery bank.
Will it work?
Thanks
avizov2 said:
Hi friends,
I want to attach to my touchpad memory card reader and external hard drive.
I wonder if it will be possible instead of buying Y cable and connect it to the OTG, to use my existing USB hub and connect to him the devices and the external battery bank.
Will it work?
Thanks
Click to expand...
Click to collapse
im assuming youre talking about doing this in android 4.0.x +. if so then yes you should be able to connect an externally powered usb hub to the OTG cable and connect more than one device at a time.
Thanks
haxin said:
im assuming youre talking about doing this in android 4.0.x +. if so then yes you should be able to connect an externally powered usb hub to the OTG cable and connect more than one device at a time.
Click to expand...
Click to collapse
Yes android 4.
to be precise, I don't have powered usb hub.
I have normal usb hub which I will connect him the power with usb battery bank device.
will it work?
avizov2 said:
Yes android 4.
to be precise, I don't have powered usb hub.
I have normal usb hub which I will connect him the power with usb battery bank device.
will it work?
Click to expand...
Click to collapse
Yes. You need to give power to the periphal usb devices. I tried the same yesterday, without problems.
Hey all
I have a powered Belkin USB hub (this one: http://www.belkin.com/us/F4U040-Belkin/p/P-F4U040), coupled with an OTG cable which I know work together, as my Kindle Fire recognizes all USB devices through this setup (Keyboard, Mouse, Flash Drive etc).
I was surprised to find that my HP touchpad does not recognize any devices connected to this hub.
I did some diagnostics with USB Device Utility, and the touchpad recognizes my USB OTG cable, as it shows as a 'Qualcomm On-Chip EHCI Host Controller'.
The touchpad simply does not see anything plugged into the hub, be it a keyboard, mouse or flash drive.
Please help me here, guys!
What am I doing wrong?
Thanks
MainCourse said:
Hey all
I have a powered Belkin USB hub (this one: http://www.belkin.com/us/F4U040-Belkin/p/P-F4U040), coupled with an OTG cable which I know work together, as my Kindle Fire recognizes all USB devices through this setup (Keyboard, Mouse, Flash Drive etc).
I was surprised to find that my HP touchpad does not recognize any devices connected to this hub.
I did some diagnostics with USB Device Utility, and the touchpad recognizes my USB OTG cable, as it shows as a 'Qualcomm On-Chip EHCI Host Controller'.
The touchpad simply does not see anything plugged into the hub, be it a keyboard, mouse or flash drive.
Please help me here, guys!
What am I doing wrong?
Thanks
Click to expand...
Click to collapse
Are you sure that's powered? The picture doesn't show any DC connectors. Is it powered by something like a mini USB to USB cable on the back? If so, that might not be enough to power the device and the peripherals attached to the ports.
Belkin Hub
Daistaar said:
Are you sure that's powered? The picture doesn't show any DC connectors. Is it powered by something like a mini USB to USB cable on the back? If so, that might not be enough to power the device and the peripherals attached to the ports.
Click to expand...
Click to collapse
The belkin does have an external dc power supply and is not powered via usb
I think you need a Y cable even with a powered hub as its purpose is to inject power back into the OTG chip in the Touchpad.
Anyone got one of these?/will it work?
Yes, I have a USB OTG cable and it works for low power USB drives.
I noticed that the USB cable which came with my phone is a regular MicroUSB 2.0 cable. Looking at the phone USB connector, I see there are a couple of more pins on the both left and right side. Also on the specs there is USB3.0 support. Does someone know where to find an USB 3.0 cable for this phone?
Thank you
I just bought a hard drive to connect to my nexus 10, but like an idiot, I didn't realize it was a USB 3.0 drive. I have an OTG cable. I am wondering if there is a way for me to externally power the hard drive. It has a single USB 3.0 female plug. Hopefully the attached picture can explain better what it is that I want to do.
I wonder if this would work
http://www.amazon.com/HDE®-Male-USB-Micro-B-Cable/dp/B006C0S2JS
I could connect the USB 3.0 connector (right-most) to the HD, the blue Type-A connector (left-most) to the OTG cable and the other USB (center) to a USB hub or power supply. Anyone have any experience with this type of thing?
MrGibbage said:
I wonder if this would work
http://www.amazon.com/HDE®-Male-USB-Micro-B-Cable/dp/B006C0S2JS
I could connect the USB 3.0 connector (right-most) to the HD, the blue Type-A connector (left-most) to the OTG cable and the other USB (center) to a USB hub or power supply. Anyone have any experience with this type of thing?
Click to expand...
Click to collapse
Did it work?