[Q] Flashing CM9,1 - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Well,
I have a Galaxy Note on hands trying to install CM9.1. It was with Official rom ICS 4.0.3. I flashed it without doing the 3 wipes, and after I flashed the rom i tried to wipe data/factory reset. Then the phone would turn off everytime. So, I tought it must be because I didn't flash, then I'm trying to go back to GB, like the tutorial we have in XDA, but I'm stuck at NAND Write Start! Cache.img, and it doesn't proceed, no error messages.
What should I do?
help!

was the 4.0.3 rooted? did you have CWM with kernel or did you use CWM.zip?

nokiamodeln91 said:
was the 4.0.3 rooted? did you have CWM with kernel or did you use CWM.zip?
Click to expand...
Click to collapse
I rooted it first, and after root i used CWM.zip file.
why?

CWM.zip file is known to cause bricks. What kernel where you on? do you remember installing a custom kernel?
---------- Post added at 01:27 AM ---------- Previous post was at 01:26 AM ----------
also it would be good it you can post the screen shot of odin .. how you selected the rom files and where.

nokiamodeln91 said:
CWM.zip file is known to cause bricks. What kernel where you on? do you remember installing a custom kernel?
---------- Post added at 01:27 AM ---------- Previous post was at 01:26 AM ----------
also it would be good it you can post the screen shot of odin .. how you selected the rom files and where.
Click to expand...
Click to collapse
I installed HydraCore 7.0 STD

msedek could be right.. if you can walk us through the procedure on how you tried to install the CM rom.. we could confirm a brick,,

nokiamodeln91 said:
msedek could be right.. if you can walk us through the procedure on how you tried to install the CM rom.. we could confirm a brick,,
Click to expand...
Click to collapse
Well
I was with Official Firmware 4.0.3. Then:
1. Installed Super SU
2. Installed CWM.zip
3. Installed CM9.1
4. Wipe data/factory Reset
5. Auto reboot the device, and styck on boot screen
6. Back to Recovery
6.1 Installed Hydracore 7.0 STD
7. Wipe cache and Wipe Dalwik
8. Tried to wipe Data/factory Reset
9. Auto-reboot and yet locked on boot screen
10 Download Mode
11. trying to install GB official rom and locked in Cache writing.
I need help because it is my boss's phone. I have a galaxy note and because of this procedure that worked fine on mine I did that.
Any help to solve this hard brick?

Anyone? I need help
Really desperate here.

Installing a rom using temp cwm.zip could have done the trick to brick your phone. Anyhow. Could you paste the odin logs.

nokiamodeln91 said:
Installing a rom using temp cwm.zip could have done the trick to brick your phone. Anyhow. Could you paste the odin logs.
Click to expand...
Click to collapse
oh,
I'm not anymore in the PC where I tried Odin. But the logs were pretty usual, stopping at NAND Write Start
like this image
http://forum.xda-developers.com/attachment.php?attachmentid=1224997&stc=1&d=1343392025
And I also tried to install ICS room 4.0.3. That went on till factoryfs.img, then stoped.
Super Brick? Really? How's that possible?

provettirodolfo said:
oh,
I'm not anymore in the PC where I tried Odin. But the logs were pretty usual, stopping at NAND Write Start
like this image
http://forum.xda-developers.com/attachment.php?attachmentid=1224997&stc=1&d=1343392025
And I also tried to install ICS room 4.0.3. That went on till factoryfs.img, then stoped.
Super Brick? Really? How's that possible?
Click to expand...
Click to collapse
The stopping at "factoryfs.img" in combination with using the temporary recovery in cwm.zip is typical for a bricked device.
Please read hg42's thread for checking the bad sectors and for a workaround by repartitioning (this will exclude the bad parts from using it). But first check the eMMC with his method for errors and real confirmation of the brick.
A complete repair is only possible with a replacement of the motherboard by Samsung.

Related

[Q] Galaxy Ace Bootloop. Odin-ed, Wiped still no succes.

Dear XDA,
A friend of mine has a galaxy ace stuck in bootloop. The phone has never been rooted or flashed with a custom rom.
I tried to help him, reflashed stock rom through odin and did a wipe/factory reset. But still havent had any succes.
Do you guys have any suggestions ?
Greetings,
A happy galaxy s owner
Also, i do not think it is possible to flash a custom rom because the phone doesnt has CWM and i cant root with SuperOneClick because USB Debugging is not enabled. And I cant acces the phone.
Try this:
Google and download this file names S5570_Odin_Multi_Downloader_v4.38
Cooper_v1.0.ops
Orion.ops
then download a stockfirmware for your ace.
just use some COMMON SENSE in the app, specifically "ODIN" and locate the ".OPS file" and the STOCK FW you just downloaded. Voila! Good as new.
If you can boot to recovery you most definitely can install CWM.
Download official stock rom, then flash it, after that boot into recovery then do a full wipe
Hope that will help
Sent from my GT-S5830 using Tapatalk 2
Guys, thanks for the replies but they are useless.
I mentioned the following : "Reflashed stock rom through odin and did a wipe/factory reset. "
I did this with the cooper OPS, why should the orion do something else ?
Any other suggestions?
htcsnap93 said:
Guys, thanks for the replies but they are useless.
I mentioned the following : "Reflashed stock rom through odin and did a wipe/factory reset. "
I did this with the cooper OPS, why should the orion do something else ?
Any other suggestions?
Click to expand...
Click to collapse
Did you use the 4.38 Odin? Because I think Ace and S uses different odin versionsIf that didnt work then root it or install CWM. Last resort IMO. Just tell him that you used magic and stopped the bootloop
---------- Post added at 06:37 PM ---------- Previous post was at 06:37 PM ----------
Paulicarpio said:
Google and download this file names S5570_Odin_Multi_Downloader_v4.38
Cooper_v1.0.ops
Orion.ops
then download a stockfirmware for your ace.
just use some COMMON SENSE in the app, specifically "ODIN" and locate the ".OPS file" and the STOCK FW you just downloaded. Voila! Good as new.
Click to expand...
Click to collapse
What is the orion.ops for?
Flash 2.3.3 first, then 2.3.4 and followed by 2.3.6
Respecting others never hurt, let's build a better XDA community.
hello! i had your problem with my ace and i could not find a solution at first but after a while i had worked out a solution. NOT guaranteed to work. also you will lose ALL DATA
1.flash stock through odin (2.3.5 reccomended)
2.wipe/factory reset
3.flash this: https://docs.google.com/file/d/0B-eHBmC1vSXGc1BRSWlqRW1Nc28/edit - this will root your device
4.afterwards flash this: https://docs.google.com/file/d/0B-eHBmC1vSXGeWNBOXhCVjZTRkk/edit - this will give you cwm
5.turn off then boot into recovery again.
6.wipe data/factory reset, cache, dalvik cache, mount and format system
7. install this ROM: https://docs.google.com/file/d/0B-eHBmC1vSXGVU1TSjdpUlF4MDg/edit
8.boot up your phone. it will take about 5 minutes to boot again, and you will have xperiatized rom. you can now flash whatever rom you like or go back to stock. i hope i have helped you and if i have please hit thanks
htcsnap93 said:
Dear XDA,
A friend of mine has a galaxy ace stuck in bootloop. The phone has never been rooted or flashed with a custom rom.
I tried to help him, reflashed stock rom through odin and did a wipe/factory reset. But still havent had any succes.
Do you guys have any suggestions ?
Greetings,
A happy galaxy s owner
Also, i do not think it is possible to flash a custom rom because the phone doesnt has CWM and i cant root with SuperOneClick because USB Debugging is not enabled. And I cant acces the phone.
Click to expand...
Click to collapse
Which rom did you flash with Odin? I think that was the problem... Flash this one: S5830XWKB7 Google for the download link, sorry I can't provide you it right now. The package contains four files, put them into Odin and flash it. The phone will boot. It's a multi csc Froyo. Than, you can flash the rom of your choice.
Btw: you can flash cwm, even if you're in bootloop. Just copy the zip to your sd card and flash it in recovery mode, than boot to cwm. Okay, you need an exetrnal/inernal sd card reader for this.

Problem whit CriskeloRom vICS.v9.1 semibrick

This is my history
Well first i have a galaxy note n7000 whit gigerbread 2.3.6
Root = DoomLORrD_v4_ROOT-zergRush-busybox-su.zip
CWM = CF-Root-SGN_ZS_MUL_KK1-5.0-CWM5.rar
Then I change to
CriskeloRomNOTE V7 installed by AbyssNoteKernel42TouchOriginalLogo.zip
At this point all go fine to me
My problem come when I try to Install the new version of CriskeloRomNOTE.vICS.v9.1
I do a mistake because i download AbyssNoteKernel42redCustomLogo.zip
But somethings happen because when i press (volume up, menu, power) to get in CWM to flash the redcwm, this take me directly to redcwm,(BUT i never flash the redcwm zip) i complete forget FLASH THE REDCWM and i install CriskeloRomNOTE.vICS.v9.1 from this (phanthom) redcwm during the flash process all go fine, and when reboot, bootlooping appers 
Then i cry for 5 minutes , the i remove the battery and power on again an then start succesfully, but when i get in CWM this take me to my first CWM 5.5.0.4
Then i try to flash
AbyssNoteKernel42redCustomLogo.zip
An i get this:
Installing: /emmc/ AbyssNoteKernel42redCustomLogo.zip
Finding Update package...
Opening Update package...
Installing Update package...
AND GET STUCKED HERE then i have to power off the phone
Then I try to flash
AbyssNoteKernel42TouchOriginalLogo.zip
And get the same error
PLEASE help me , dont ignore me, i dont like this semibrick, i have fear someday I cant restore my Phone.
Questions
1- how can i resolve my problem whit CWM recovery(emmc)
2- I have a backup from cwm from my first original gingerbread , ¿is safest flash this?
3- Is safest try to reinstall CriskeloRomNOTE.vICS.v9.1 or any other ICS ROM
4- What i did wrong please help me i dont want hardbrick my phone
5- How repair al my faults, the criskelo rom is the best the error was mine
6- what happen if i do any wipes at this state
[/QUOTE]
i leave a screenshot of my ics
Got into something like this yesterday, this is what I did.
Downgrade to GB via ODIN and later go to recovery and flash abyss kernel, then wipe data/cache, wipe dalvik cache.
Then, flash the rom of your choice.
Remember, to take a backup through Nandroid or titanium backup.
xda rocks said:
Got into something like this yesterday, this is what I did.
Downgrade to GB via ODIN and later go to recovery and flash abyss kernel, then wipe data/cache, wipe dalvik cache.
Then, flash the rom of your choice.
Remember, to take a backup through Nandroid or titanium backup.
Click to expand...
Click to collapse
can someone give me the link about how do the downgrade
here is the link:https://www.youtube.com/watch?v=jr3DDEh8vyc&feature=plcp.
Good luck
simplelife said:
here is the link:https://www.youtube.com/watch?v=jr3DDEh8vyc&feature=plcp.
Good luck
Click to expand...
Click to collapse
this vídeo is vía CWM recovery and my problem is get stucked when I try to flash the abiss kernel, I belive i need downgrade vía odin But i never do it before if anyone can give me te link thank
sorry for my english i am rom costa rica and never study english
how return from ics to gigerbread vía odin
which stock rom i need to use
efraincc24 said:
how return from ics to gigerbread vía odin
which stock rom i need to use
Click to expand...
Click to collapse
someone can give me te steps to return to gigerbread vía odin ,can i use any stock rom whitout problem?????
efraincc24 said:
someone can give me te steps to return to gigerbread vía odin ,can i use any stock rom whitout problem?????
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=jr3DDEh8vyc
this should be helpful
---------- Post added at 07:25 PM ---------- Previous post was at 07:18 PM ----------
Follow the procedure from the youtube video and get rooted gingerbread rom . All your clockworkmod related issues will be solved and you will be good to go . Next , if you want to flash Criskelo rom then follow the exact procedure mentioned in his thread . Dont replace or re-order any steps else you will end up with nasty issues . Good luck , if you need more help then let me know :angel:
Archangel919 said:
http://www.youtube.com/watch?v=jr3DDEh8vyc
this should be helpful
---------- Post added at 07:25 PM ---------- Previous post was at 07:18 PM ----------
Follow the procedure from the youtube video and get rooted gingerbread rom . All your clockworkmod related issues will be solved and you will be good to go . Next , if you want to flash Criskelo rom then follow the exact procedure mentioned in his thread . Dont replace or re-order any steps else you will end up with nasty issues . Good luck , if you need more help then let me know :angel:
Click to expand...
Click to collapse
I apreciate your help But in the vídeo the first step is flash the abiss kernel and when i try to do it, the phone get stucked in installing update package...
then i have to power off the phone ,because this i cannot do it like in the video
what happen if i do from my recovery 5.5.0.4 ????
efraincc24 said:
how return from ics to gigerbread vía odin
which stock rom i need to use
Click to expand...
Click to collapse
Downgrade from ics to gingerbread.
1. Download any stock or pre-rooted gingerbread rom. ( you can easily find at dr.ketan or bodivas thread.)
2. Open pc odin and connect you devices with pc/laptop.
3.After get conneted, press pda button and choose the ginger rom file ( choose the biggest size file about 800mb ++).
4. Press start and wait until finished.
Remind: only press the pda button and choosing the right file. Other boxes must leave it untouch.
Sent from my GT-N7000 using xda premium
efraincc24 said:
This is my history
Well first i have a galaxy note n7000 whit gigerbread 2.3.6
Root = DoomLORrD_v4_ROOT-zergRush-busybox-su.zip
CWM = CF-Root-SGN_ZS_MUL_KK1-5.0-CWM5.rar
Then I change to
CriskeloRomNOTE V7 installed by AbyssNoteKernel42TouchOriginalLogo.zip
At this point all go fine to me
My problem come when I try to Install the new version of CriskeloRomNOTE.vICS.v9.1
I do a mistake because i download AbyssNoteKernel42redCustomLogo.zip
But somethings happen because when i press (volume up, menu, power) to get in CWM to flash the redcwm, this take me directly to redcwm,(BUT i never flash the redcwm zip) i complete forget FLASH THE REDCWM and i install CriskeloRomNOTE.vICS.v9.1 from this (phanthom) redcwm during the flash process all go fine, and when reboot, bootlooping appers 
Then i cry for 5 minutes , the i remove the battery and power on again an then start succesfully, but when i get in CWM this take me to my first CWM 5.5.0.4
Then i try to flash
AbyssNoteKernel42redCustomLogo.zip
An i get this:
Installing: /emmc/ AbyssNoteKernel42redCustomLogo.zip
Finding Update package...
Opening Update package...
Installing Update package...
AND GET STUCKED HERE then i have to power off the phone
Then I try to flash
AbyssNoteKernel42TouchOriginalLogo.zip
And get the same error
PLEASE help me , dont ignore me, i dont like this semibrick, i have fear someday I cant restore my Phone.
Questions
1-how can i resolve my problem whit CWM recovery(emmc)
2-I have a backup from cwm from my first original gingerbread , ¿is safest flash this?
3-Is safest try to reinstall CriskeloRomNOTE.vICS.v9.1 or any other ICS ROM
4-What i did wrong please help me i dont want hardbrick my phone
5-How repair al my faults, the criskelo rom is the best the error was mine
6- what happen if i do any wipes at this state
Click to expand...
Click to collapse
1) Do you do full wipe while install v9 ?
2) Are you successfully booted into v9 after the u pulled out the battery and restart?
3. What is the status of your phone now? Is better do nothing and let other member clarify and give you proper method of guide.
Sent from my GT-N7000 using xda premium
Im not sure what happened during you upgrade to v9 and why redcwm will appeared before you flash it.
1) Abyss 4.2 original/custom is a gingerbread kernel, im assuming you at abyss kernal, therefore your phone 100% wont able to boot into ics base rom.
2) Im assume now you cant flash any kernel, no matter what kernel thru cwm. Then you should flash ics rooted kernel thru pc odin. ( no need to worry about the binary count and yellow triangle).
Please report back. Other member will be glad to help you.
Sent from my GT-N7000 using xda premium
If you can get into recovery then why don't you just restore the back up. your phone will cone back to the original state. but the point is can you reboot to recovery. don't worry about bricking on GB.
Sent from my GT-N7000 using xda app-developers app
Vishal_Pratap singh said:
If you can get into recovery then why don't you just restore the back up. your phone will cone back to the original state. but the point is can you reboot to recovery. don't worry about bricking on GB.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
But he did mentioned never flash gb kernel during ugrade to criskelo v9. But why redcwm appear? ( he did mentioned able too boot into recovery mode)
According to his report, i think he might lost full root. ( because the flashing kernel proccess get stucked at all. ) if doing nand restore at this stage might having some risk. ( maybe).
Sent from my GT-N7000 using xda premium
efraincc24 said:
I apreciate your help But in the vídeo the first step is flash the abiss kernel and when i try to do it, the phone get stucked in installing update package...
then i have to power off the phone ,because this i cannot do it like in the video
what happen if i do from my recovery 5.5.0.4 ????
Click to expand...
Click to collapse
well i solve this reinstalling a stock rom of gingerbread via odin, all wipes, after this i reisntall criskelo ICS 9.1 but give me a lot of problems whit supersu always asking for permiss for all programs, fix supersu cwm 0.94 not work, battery percent is not show properly, some forcecloses then back to gb via odin
later post this whit details for anyone needed
lee yun khong said:
1) Do you do full wipe while install v9 ?
2) Are you successfully booted into v9 after the u pulled out the battery and restart?
3. What is the status of your phone now? Is better do nothing and let other member clarify and give you proper method of guide.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thank you i reinstall stock rom via odin and is ok.(for now jejeje)
lee yun khong said:
Im not sure what happened during you upgrade to v9 and why redcwm will appeared before you flash it.
1) Abyss 4.2 original/custom is a gingerbread kernel, im assuming you at abyss kernal, therefore your phone 100% wont able to boot into ics base rom.
2) Im assume now you cant flash any kernel, no matter what kernel thru cwm. Then you should flash ics rooted kernel thru pc odin. ( no need to worry about the binary count and yellow triangle).
Please report back. Other member will be glad to help you.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
at this point is as you say, i cant install any kernel because in the installation process get stuk via cwm, but when i enter to cwm this send me to my first cwm 5.0.5.4 but the rom ics work whit some minor problems and i resolve like you say via odin to stock ginger bread and i return from criskelo 9.1 to stock.gingerbread 2 times

need help with root

i have gingerbread 2.3.6 with kernal "jhlb2" i try with odin and not success .
how can i do the root ?
a1shay1 said:
i have gingerbread 2.3.6 with kernal "jhlb2" i try with odin and not success .
how can i do the root ?
Click to expand...
Click to collapse
You could read Dr Ketan's guide in Development a couple of times and then explain properly what you're doing if you're still struggling.
Sent from my GT-N7000 using xda premium
a1shay1 said:
i have gingerbread 2.3.6 with kernal "jhlb2" i try with odin and not success .
how can i do the root ?
Click to expand...
Click to collapse
Hello a1shay1, could you please elaborate what you are doing in order to root your device? This will help us to guide you better.
a1shay1 said:
i have gingerbread 2.3.6 with kernal "jhlb2" i try with odin and not success .
how can i do the root ?
Click to expand...
Click to collapse
No need to use ODIN for rooting.
Follow this
http://forum.xda-developers.com/showthread.php?t=1329360
what to choose ?
sahilarora2003 said:
No need to use ODIN for rooting.
Follow this
http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
i already try Easy rooting toolkit and after my note reboted i see that nathing happand
from what i undestand i need to use "Get root access on Newer GB ROM (non rootable directly)" ?
if yes so
"fter updating to newer ROM, you can flash CF root kernel from here
according to newer ROM kernel. And Flash it using Mobile Odin OR CWM."
my kernal is not listed there ,can i use LB1 ?
anyone. ..?
anyone pls
Could you post the details of your device? Go to Settings and About phone.
Your ROM is non rootable
You have following option
-Flash Pre rooted ROM, and update to existing ROM with Mobile Odin / CWM
-If you want to switch to ICS, flash it after wiping device and Root it.
Guide you can find on same link sahil have suggets you.
---------- Post added at 06:42 PM ---------- Previous post was at 06:40 PM ----------
YLNdroid said:
Could you post the details of your device? Go to Settings and About phone.
Click to expand...
Click to collapse
He wrote earlier LB2 kernel thats enough to decide.
about my option
about my option
1)after i flash pre rooted rom how can i update to my rom ?
2)what is the option to wipe ? it delete the all device ? becouse if yes how can i put custom ics,if there is nothing on the device ?
1. After flashing Pre rooted ROM you will have CWN
How to use is depend on which custom ROM you want to flash
For stock ROM this is the way
http://forum.xda-developers.com/showpost.php?p=20963730&postcount=3
2.Don't understand what you want to ask
about option number 2
the second opion seem to bee more easy than the first one
my Q is : the option wipe is like format in computer ? and using after that with odin is like to boot with bootable cd with os in computer ?
No, Format in computer requires to Install OS.
Here wipes means your device will reboot to factory set. Means everything will be there except stuff you have installed manually.
and
dr.ketan said:
No, Format in computer requires to Install OS.
Here wipes means your device will reboot to factory set. Means everything will be there except stuff you have installed manually.
Click to expand...
Click to collapse
someone just told me that after wipe the device will turn on properly - this what i wanted to know
so my new Q is : i want to put stunner rom so i just put him with odin AFTER WIPE .but how can i root the device after i put the stunner ?
IMHO plz you read more before modding your valuable device.
dr.ketan said:
IMHO plz you read more before modding your valuable device.
Click to expand...
Click to collapse
IMHO=In My Humble Opinion (just in case you were wondering what it meant)
Follow dr.Ketan's advice,a1shay1.
First root successfully,play around with simple things(stock,safe stuff) then think of modding.
Its very very easy,(believe me) to turn your Note a simple,humble paperweight.
suggest
A friend just suggest to root with
I9220LP1-N7000-ICS-REPACK.tar
And then to put the stunner from sd card
stil not good
zeeshanonlyme said:
IMHO=In My Humble Opinion (just in case you were wondering what it meant)
Follow dr.Ketan's advice,a1shay1.
First root successfully,play around with simple things(stock,safe stuff) then think of modding.
Its very very easy,(believe me) to turn your Note a simple,humble paperweight.
Click to expand...
Click to collapse
after i stay awake all night finally i found a solution here is little guid
1)wipe factory reset
2)wipe cash
3)with odin install I9220LP1-N7000-ICS-REPACK.tar
4)now you have root
5)wipe factory reset
6)install stunner (or other rom) ,from recover mode choose install from zip
and give the path in the sdcard were you put the rom
to install stunner 1.6.26
first install version 5.01 beta
and then install 1.6.26
a1shay1 said:
after i stay awake all night finally i found a solution here is little guid
1)wipe factory reset
2)wipe cash
3)with odin install I9220LP1-N7000-ICS-REPACK.tar
4)now you have root
5)wipe factory reset
6)install stunner (or other rom) ,from recover mode choose install from zip
and give the path in the sdcard were you put the rom
to install stunner 1.6.26
first install version 5.01 beta
and then install 1.6.26
Click to expand...
Click to collapse
So ure problem solved rt?
Good that you got that on your own.
a1shay1 said:
after i stay awake all night finally i found a solution here is little guid
1)wipe factory reset
2)wipe cash
3)with odin install I9220LP1-N7000-ICS-REPACK.tar
4)now you have root
5)wipe factory reset
6)install stunner (or other rom) ,from recover mode choose install from zip
and give the path in the sdcard were you put the rom
to install stunner 1.6.26
first install version 5.01 beta
and then install 1.6.26
Click to expand...
Click to collapse
For future reference, don't perform any wipes under re packed kernel, they have the bug. There shouldn't be a need for these re packed packages anymore steer clear of them. Don't do wipes or nandroid restores under ics kernels AT ANY TIME or you risk bricking.
Sent from my GT-N7000 using xda premium
can't start up my rooted SG Note
hello sir, hello everyone,
my deep apologies if this question already asked before. I have search this forum and don't find the right solution for my problem.
recently i rooted my SG note with CF-root using odin. Everything seem be alright on Odin. no weird error message. (I have rooted my GS S3 before and i success). But the problem is, my phone never start up. it's stop on samsung boot image and shut down again. I see a small yellow triangle appear on my phone. What's actually happen on my phone and how do i solve it. please everyone give an advice and point me to link that could help me.
thousand thank you for XDA member.

[Q] Sick and tired of these bootloops on ICS!

As the title says, I am tired of these random bootloops who is making my phone bootloop and never startup. Now I can't even acess the phone to get a backup! I have tried almost all ICS roms and now the latest one is [ROM][4.0.4]BlueBerry Project - ICS by lippol94's point of view (based on CM sources)
Please helpe me!
1. To acess the phone in order to make a backup with titanium backup
2. Give me some tip on a stable ICS rom without any goddamn bootloop 1-2 weeks after installation!! PS. not roms like "slim ****" and so on, I want stock ICS without any extras!!
3. Stop working on these JB roms and start to stabilise ICS and then work for JB, just some tip for the devs!
thanks!
I stopped overclocking and the bootloops stopped for me.
Vertron said:
I stopped overclocking and the bootloops stopped for me.
Click to expand...
Click to collapse
I have never OC, clean install on every rom!
Bump at least help me get into the phone to take backup on my stuff
I have already flashed semaphore kernel via Odin but it's still bootlooping, I haven't lost access to the recovery but I don't understand this ****ing common boot loop i am facing
Sent from my MZ601 using XDA Premium HD app
romdroid. said:
Bump at least help me get into the phone to take backup on my stuff
Sent from my MZ601 using XDA Premium HD app
Click to expand...
Click to collapse
Go into download mode & flash a Semaphore.tar kernel using odin. That should hopefully make it boot. If it doesn't work reflash Semaphore in Odin, but this time check repartition.
Vertron said:
Go into download mode & flash a Semaphore.tar kernel using odin. That should hopefully make it boot. If it doesn't work reflash Semaphore in Odin, but this time check repartition.
Click to expand...
Click to collapse
I checked repartition and odin gave me this error
Can't open the specified file. (Line: 1815)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
what should I do now? I have flashed before with Odin no problem until now..I also removed sim-card and SDcard
romdroid. said:
I checked repartition and odin gave me this error
what should I do now?
Click to expand...
Click to collapse
I don't know it's never failed for me before. If Semaphore doesn't fix the bootloop problem for me then I'm forced to flash a GB rom and start from scratch. It's unlucky that you haven't been able to backup your apps, it happened to me before too, very annoying.
If you can get into recovery try clearing your cache & davik cache.
Vertron said:
I don't know it's never failed for me before. If Semaphore doesn't fix the bootloop problem for me then I'm forced to flash a GB rom and start from scratch.
If you can get into recovery try clearing your cache & davik cache.
Click to expand...
Click to collapse
I can get into recovery, I have also cleared cache & dalvik but with no sucess
Maybe someone else can jump in and help?
bump
desperate guy I need to take backup, just want to acess the phone :crying:
So after flashing semaphore you can access recovery but phone still doesn't boot?It's bootlooping from Galaxy S device boot to kernel boot image then back to device boot and so on?No eternal bootanimation?
Anyway,as recovery is accessible it could just be caused by a settings problem,there's advanced options to clear init.d folder in semaphore cwm menu,you could try this at first.
Everytime it happened to me i just flashed semaphore ICS as .tar even with auto-reboot ticked and my phone booted fine (when it was those strange device>kernel>device with lost access to recovery bootloops).
Previously i had good results with MnIcs kernel too,you could try:
http://dl.dropbox.com/u/25071013/MNICS-20120509-7-LR.tar
But the thing that worked all the times (for cwmless bootloops i mentionned) was cm7 initial kernel .tar:
http://dl.dropbox.com/u/25071013/cm7-galaxys-initial-kernel.tar
Note it's a ginger aosp (cm7) kernel,so once it is flashed (auto-reboot UN-ticked) and you are in his orange recovery menu you can flash any ICSkernel zip that hopefully lies on your sd and see if it boot now or flash your ics rom (no-wipe needed,it's not what you want thought but you'll have to flash the rom in two times:first flash will go into little and fast bootloop to recovery due to change of cwm so you pull off battery,go back to recovery that will bechanged and flash again the rom).
Another thing i see is making a nandroid backup in your actual recovery even if it's a bootlooping one cause you can restore only data and datadata (just apps and settings) once you will be able to use your rom or another similar again.
romdroid. said:
bump
desperate guy I need to take backup, just want to acess the phone :crying:
Click to expand...
Click to collapse
Options
First pull out battery to break that cycle
1) Flash a 512 PIT FILE with REPARTITION MUST BE UNCHECKED phone will Boot up
IF failed
2) IF On ICS ROM flash http://forum.xda-developers.com/showthread.php?t=1468795 ICS kernel
xsenman said:
Options
First pull out battery to break that cycle
1) Flash a 512 PIT FILE with REPARTITION MUST BE UNCHECKED phone will Boot up
IF failed
2) IF On ICS ROM flash http://forum.xda-developers.com/showthread.php?t=1468795 ICS kernel
Click to expand...
Click to collapse
What does the pit file do?
Sent from my GT-I9000
Bejda said:
So after flashing semaphore you can access recovery but phone still doesn't boot?It's bootlooping from Galaxy S device boot to kernel boot image then back to device boot and so on?No eternal bootanimation?
Anyway,as recovery is accessible it could just be caused by a settings problem,there's advanced options to clear init.d folder in semaphore cwm menu,you could try this at first.
Everytime it happened to me i just flashed semaphore ICS as .tar even with auto-reboot ticked and my phone booted fine (when it was those strange device>kernel>device with lost access to recovery bootloops).
Previously i had good results with MnIcs kernel too,you could try:
http://dl.dropbox.com/u/25071013/MNICS-20120509-7-LR.tar
But the thing that worked all the times (for cwmless bootloops i mentionned) was cm7 initial kernel .tar:
http://dl.dropbox.com/u/25071013/cm7-galaxys-initial-kernel.tar
Note it's a ginger aosp (cm7) kernel,so once it is flashed (auto-reboot UN-ticked) and you are in his orange recovery menu you can flash any ICSkernel zip that hopefully lies on your sd and see if it boot now or flash your ics rom (no-wipe needed,it's not what you want thought but you'll have to flash the rom in two times:first flash will go into little and fast bootloop to recovery due to change of cwm so you pull off battery,go back to recovery that will bechanged and flash again the rom).
Another thing i see is making a nandroid backup in your actual recovery even if it's a bootlooping one cause you can restore only data and datadata (just apps and settings) once you will be able to use your rom or another similar again.
Click to expand...
Click to collapse
YES! I can acess recovery after I have flashed semaphore kernel, but it keeps bootlooping for no reason. I have already tried to install the .tar semaphore without sucess. thank you for your respone I will try that!
should I unpack MnIcs kernel or just leave it and flash it as it is? I am not without a recovery so I'll try to flash that kernel first and see if it fixes it
xsenman said:
Options
First pull out battery to break that cycle
1) Flash a 512 PIT FILE with REPARTITION MUST BE UNCHECKED phone will Boot up
IF failed
2) IF On ICS ROM flash http://forum.xda-developers.com/showthread.php?t=1468795 ICS kernel
Click to expand...
Click to collapse
thanks for ur answer mate where can I find "512 PIT FILE" any links?
Yes,let the MnIcs or initial cm7 .tar as they are.
romdroid. said:
thanks for ur answer mate where can I find "512 PIT FILE" any links?
Click to expand...
Click to collapse
here http://forum.xda-developers.com/showthread.php?p=29331775#post29331775
Bejda said:
Yes,let the MnIcs or initial cm7 .tar as they are.
Click to expand...
Click to collapse
argh, seems like it didnt work
xsenman said:
here http://forum.xda-developers.com/showthread.php?p=29331775#post29331775
Click to expand...
Click to collapse
thanks! nothing will be deleted from the phone if I flash it, right?:good:
Helloworld294 said:
What does the pit file do?
Sent from my GT-I9000
Click to expand...
Click to collapse
It rearranges ROM space trade operation between /system and /dbdata
---------- Post added at 08:18 AM ---------- Previous post was at 08:17 AM ----------
romdroid. said:
argh, seems like it didnt work
thanks! nothing will be deleted from the phone if I flash it, right?:good:
Click to expand...
Click to collapse
yes, but make sure you untick repartition
xsenman said:
It rearranges ROM space trade operation between /system and /dbdata
---------- Post added at 08:18 AM ---------- Previous post was at 08:17 AM ----------
yes, but make sure you untick repartition
Click to expand...
Click to collapse
That is odd, I cant even click "start"? when trying to flash .512 pit
That is with odin 1.82
I downloaded odin 3.04 and when I click start I get "no binary selected"
romdroid. said:
That is odd, I cant even click "start"? when trying to flash .512 pit
Click to expand...
Click to collapse
just reboot PC and Phone after a battery pull
---------- Post added at 08:25 AM ---------- Previous post was at 08:23 AM ----------
use Odin 1.85 than

[Q] How to UnBrick galaxy n7000

Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
ahmedmasu said:
Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
Click to expand...
Click to collapse
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
what rom were you on? if JB, try a factory reset.
nokiamodeln91 said:
what rom were you on? if JB, try a factory reset.
Click to expand...
Click to collapse
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
lionelia said:
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
Click to expand...
Click to collapse
Thank for your reply.
I tried flashing the stock rom with Odin but the error remained there
Can you please give me a link from where I can get PIT file?
ahmedmasu said:
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
Click to expand...
Click to collapse
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
Is there any guide\link to do this ?
http://forum.xda-developers.com/showthread.php?t=1901191
nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
I have successfully flashed rom on my phone which is : N7000ZSLPF_N7000OZSLPF_OZS
My phone is now out of bootloop but now I face a different issue that I cant get my sim card work, it gives no signal and I noticed one more thing that IMEI of my phone is blank.
I went into recovery mode and it is still showing that efs error as it was showing before...
Any suggestion what should I try to fix this ?
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
nokiamodeln91 said:
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
Click to expand...
Click to collapse
I followed the instructions provided by the manual ... after step 2 I get imei but after step 3 it get empty again.
Signals do come after step 2 but when I try to make some call it says "Not registered on network".
Looking forward to your reply.
i cannot help you in this case if there is no efs backup.. so.. you on your own..
nokiamodeln91 said:
i cannot help you in this case if there is no efs backup.. so.. you on your own..
Click to expand...
Click to collapse
Thanks for your help so far...
I currently have an imei but it is some random number starting with "004999" and I do get signals but cant make a call .. Do you know if there is some hope for me or not .. and what else I can try.
This is the developer imei. You may be able to make calls of you try a GB rom. Or there is one rom by ThaiDai which had some work around built into it. I don't know which one.
Else the site I mentioned earlier has contact info of cvxcvx. He can fix your phone remotely but by charging about 10 euros.
Need help for a bricked N7000
Hi guys,Im a complete newbie to the whole custom rom scenario. Yet, after being fed up of touchwiz on my N7000 i decided i wanted to taste some KitKat on my phone. After seeing many videos with positive reviews I thought it would be a rather easy process. But somehow I seem to have made a mistake and now my phone is stuck on Samsung Galaxy Note N7000 logo. I cant get into recovery mode as suggested on most places. As of now I only have access to the download mode but dont know what to do with it.
Here's what I tried doing :
1) I was on stock OS, and these are my specifics : Galaxy Note N-7000 running JB 4.1.2
Baseband version : N7000DDLS6
Kernel version: 3.3.31-906407
BUild number:JZO54K.N7000DDLSC
2) As I was following the procedure from Omnirom's official website, I first rooted my phone using Framaroot's single click root app. This gave me SuperSU app.
3) Then I tried installing TWRP recovery (recommended by Omni) but they dont support the N7000. I read a few other tutorials where it was stated the CWM recovery and that too Philz CWM recovery is the best to go with. Apparently it is just stock kernel with CWM recovery. Since the latest one(philz_touch_6.07.9-n7000) was not being installed, I installed the one before that which worked (PhilZ-cwm6-DDLSC-ODD-5.11.2-signed).
4) I even installed the ROM Manager as per the tutorial. However, uptil now I could access recovery mode ( Vol UP+Home+Power) and i saw the touch enabled philz recovery mode once. Then i did system reboot.
5)After reboot, this is where I did a mistake in my opinion. I opened ROM Manger and clicked on "open in recovery mode" option. Since then the phone is stuck on the Galaxy Note N7000 logo. Please help me revive the phone. Thanks in advance. Again, Im doing this for the first time and most terms are new to me. So please explain the procedure as other tutorials are not very clear.
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
nokiamodeln91 said:
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
Click to expand...
Click to collapse
How do I do i install the kernel using ODIN? I can only access download mode and nothing else. I cant access recovery mode. Please help.
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
ANDROID-000 said:
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
Click to expand...
Click to collapse
http://www.mediafire.com/?ep82ku4c6...o6dtlx8lbc3xz,ob3q9g36b9b3w22,d3v1gys7cbckiet

Categories

Resources