Database Develop

[ROM][Port][JB]MIUI 2.10.26 - Legend Android Development

Hi guys I've done a simple port of miui 2.10.26 based on Zeubea cm10 beta1 and wanted to post here
Using it for 2 days and its running just fine :good:
Screen shots of the rom has been attached.
Working:
Everything that works in CM10 Beta1
Not Working:
GPS (Not tested)
Note:
MIUI camera has been removed as it wont work.
For themes to working you need to create theme folder under data\system\
Download link:
http://www.mediafire.com/?oaz4l7u6agvl1bd
Credits:
Zeubea for his CM10
ak0r for his rom

Bugs i've noticed :
Cannot change the lock screen wallpaper
WiFi doesn't connect sometimes and requires a reboot
Generally lags and stutters unlike zeubea's Cm10 .. makes it pretty unusable sometimes.
Email app is missing(not exactly a bug)

Testing this ROM for a couple of days and so far noticed the following:
- WIFI sometimes starts only after several reboots
- I can't seem to find some CM settings, like performance, custom brightness levels
- missing increasing ringtone volume
- GPS is working, however takes several minutes before lock
- pressing systemupdate in about phone (may be called different 'cause I use Dutch translation) gives fc
- like all ROMs starting from cm9, display drains my battery
- can't figure out where to change statusbar settings, provider is in the statusbar and eating up a lot of space
- can't add wdgets like Accu and Wifi from settings
- fc's mentioning acore happen a lot
- apps that work on several CM versions don't work here, like nu.nl, hockey.nl and buienradar.nl. That is a pain in the *ss!
- built in user feedback does not work
The issue of draining prevents me from switching from cm7.2 to a later one.
However, the ROM looks very promising, great work!
Sent from my Legend using xda app-developers app

jazib360 said:
Hi guys I've done a simple port of miui 2.10.26 based on Zeubea cm10 beta1 and wanted to post here
Using it for 2 days and its running just fine :good:
Screen shots of the rom has been attached.
Working:
Everything that works in CM10 Beta1
Not Working:
GPS (Not tested)
Note:
MIUI camera has been removed as it wont work.
For themes to working you need to create theme folder under data\system\
Download link:
http://www.mediafire.com/?oaz4l7u6agvl1bd
Credits:
Zeubea for his CM10
ak0r for his rom
Click to expand...
Click to collapse
If you add defaulttheme file to init.d then no need to create the data\system\theme folder

Related

Well... the great MIUIv4 has already arrived to our device, but still I can't use that because I often to use camera. Since I am not a dev, I can't give my hand on it. So I continue to port miui GB, and again... just playing around for my comfort.
Here is my port of MIUI if anyone want to taste it in FB0 devices.
I am not an android developer, my knowledge is very limited, I just tried to make my android phone more comfortable for me.
It's more like my 2.2.3 port but some different things, it has to be different (at least the version ), here are:
- SpeedDeemon Kernel v5.0, (boot image has been modded by me)
- USB tether work great
- Ads blocker hosts included
- ICS Lockscreen ( ring color has been changed )
- ICS themed keyboard
- window effect (not the ICS one, but I like this one)
- Modified theme based on Black Ice theme as default
- My Google splash screen
- Boot animation changed
- 4 Way boot ( I have to keep this )
- Spareparts tools
- Compass
- google maps streetview
- CM7 camera beside MIUI camera
- Angry GPS
- SD card tweak ( to make read sdcard faster )
- Sony Bravia Engine
- Default wallpapers have changed, both lockscreen and desktop
- Some additional sounds and wallpaper
- etc...
Removed:
- MIUI talk
- MIUI status
Now the cpu clock is running at 1.3GHz max and 122MHz min at smartassV2 governor by default. But you can change them with SetCPU or other app to OC.
For haptic feedback level, you've to set manually.
Search button => Menu => Search settings => tick ON for Settings and go back to Search then type "Tweak" or "haptic", open "Haptic feedback tweaks" and do the setting in "Set Down Patern" only, don't forget to tick ON "Use haptic feedback" option.
Native Wifi tether still not working (#@#[email protected]&^$!). You can use this Wireless Tether from Market as I always use it even native wifi is working , just suggestion.
Credits:
MIUI credit goes to MIUI devs
SDKernel credit goes to Austrie
BlackIce theme credit goes to cgvelmax
Icons credit goes to foreverone
other modules & libraries goes to TJ_Style & Issac87
Edowar for teach me things...
And others (Sorry I forgot)...
Applying directly from RC3 and Sharp rom will not work. You have to apply it from other rom (RC1, RC2, other stock, CM7 and other MIUI will work).
If you update from previous MIUI 2.2.3:
1. Install trough CWM
2. Wipe cache
3. wipe dalvik cache
3. Reboot
4. Done
The mandatory installation order if update from other rom:
1. Install trough CWM
2. Wipe data
3. Reboot
4. Wait until settled
5. Reboot again...
6. Done
* The second boot actually is the first fresh boot!
You can get it here and flash it using CWM.
Patch for incoming call volume here , Free Radical... thanks.
If you want to use mOCK kernel which already supported for 2 way call record, find it at attached files.
I am not responsible for any damages (bricking/phone ruining) occurred while flashing or using this ROM. By using this ROM, you understand that I am not liable for any or all consequences of using this ROM. If you don't know what you're doing, DON'T TRY IT.

1) Does SD Kernel has 2WCR patch or do we have to flash Mocky Kernel posted by Free Radical? and will Mocky support 2.3.9
2) Does the Camera still record in .3GP as 2.2.3?

paarkhi said:
Does SD Kernel has 2WCR patch or do we have to flash Mocky Kernel posted by Free Radical? and will Mocky support 2.3.9
Click to expand...
Click to collapse
SDKernel still lack of 2wcr, mock work perfectly, you can flash it with mock.
I still use the same camera library with 2.2.3. But it record as .mp4 format with mine, it's recorded by miui camera.

Well... the great MIUIv4 has already arrived to our device, but still I can't use that because I often to use camera. Since I am not a dev, I can't give my hand on it. So I continue to port miui GB, and again... just playing around for my comfort.
Here is my port of MIUI if anyone want to taste it in FB0 devices.
I am not an android developer, my knowledge is very limited, I just tried to make my android phone more comfortable for me.
It's more like my 2.2.3 port but some different things, it has to be different (at least the version ), here are:
- SpeedDeemon Kernel v5.0, (boot image has been modded by me)
- USB tether work great
- Ads blocker hosts included
- ICS Lockscreen ( ring color has been changed )
- ICS themed keyboard
- window effect (not the ICS one, but I like this one)
- Modified theme based on Black Ice theme as default
- My Google splash screen
- Boot animation changed
- 4 Way boot ( I have to keep this )
- Spareparts tools
- Compass
- google maps streetview
- CM7 camera beside MIUI camera
- Angry GPS
- SD card tweak ( to make read sdcard faster )
- Sony Bravia Engine
- Default wallpapers have changed, both lockscreen and desktop
- Some additional sounds and wallpaper
- ES Explorer ( you can uninstall it if not like, it's upgradable and uninstallable)
- etc...
Removed:
- MIUI talk
- MIUI status
Now the cpu clock is running at 1.3GHz max and 122MHz min at default. But you can change them with SetCPU or other app to OC.
For haptic feedback level, you've to set manually.
Search button => Menu => Search settings => tick ON for Settings and go back to Search then type "Tweak" or "haptic", open "Haptic feedback tweaks" and do the setting in "Set Down Patern" only, don't forget to tick ON "Use haptic feedback" option.
Native Wifi tether still not working (#@#[email protected]&^$!). You can use this Wireless Tether from Market as I always use it even native wifi is working , just suggestion.
Credits:
MIUI credit goes to MIUI devs
SDKernel credit goes to Austrie
BlackIce theme credit goes to cgvelmax
Icons credit goes to foreverone
other modules & libraries goes to TJ_Style & Issac87
And others (Sorry I forgot)...
You can get it here and flash it using CWM.
Applying directly from RC3 and Sharp rom will not work. You have to apply it from other rom (RC1, RC2, other stock, CM7 and other MIUI will work).
If you came from miui 2.2.3, you can do without wipe data, just wipe cache and dalvik cache.
Wipe data right BEFORE flash this rom is a strong suggestion if you came from other rom, so it will has the fresh space to work and won't find the weird things that isn't has to be.
* After the first boot, wait until the system settled and then reboot again. The second boot actually is the first fresh boot!
I am not responsible for any damages (bricking/phone ruining) occurred while flashing or using this ROM. By using this ROM, you understand that I am not liable for any or all consequences of using this ROM. If you don't know what you're doing, DON'T TRY IT.
Click to expand...
Click to collapse
congrate, uploading my miui 2.3.9v now, same as ck, native wifi tether not working, get to use 3rd party app, although i hv ported miui ics, still playing with gb roms for functios reason
Sent from my u9000 using xda premium

zukriaksah said:
congrate, uploading my miui 2.3.9v now, same as ck, native wifi tether not working, get to use 3rd party app, although i hv ported miui ics, still playing with gb roms for functios reason
Sent from my u9000 using xda premium
Click to expand...
Click to collapse
Great Zuk.... a.k.a mr Porter ... well done! I like your work with this device...

CacingKalung said:
Great Zuk.... a.k.a mr Porter ... well done! I like your work with this device...
Click to expand...
Click to collapse
3g network not really stabil tonight, i think i will upload it tomorrow
Sent from my u9000 using xda premium

Downloading CK, will update from 2.2.3 to 2.3.9

I am unable to install any application. It says insufficient storage .... though storage space is OK. Am I wrong with some setting.

some screenies please!

Screenshots attached. My installed miui has been patched to change carrier name with "CacingKalung" but the one I shared has not been patched.
Sent from my CSL-MI410 MIUI 2.3.9 using tapatalk

CK, your ROM at first instance is awesome.
but one weird thing happening
Not allowed to install any application, indicating memory full ...
for reference please check Screen Shots
Vivek

Hmm... not happen to me. Is that your first boot? May be you should try to wipe data if the issue still there after the second boot.
If you rewiped data, then you should reboot after settled at the first boot (twice booted after wiped). Hope it help.
Sent from my CSL-MI410 MIUI 2.3.9 using tapatalk

CacingKalung said:
Hmm... not happen to me. Is that your first boot? May be you should try to wipe data if the issue still there after the second boot.
If you wiped data, then you should reboot after settled at the first boot (twice booted after wipe).
Sent from my CSL-MI410 MIUI 2.3.9 using tapatalk
Click to expand...
Click to collapse
Sorry, I forget to update after I corrected it.
I followed the same process and I got the result.... Anyway thanks bro...
Can I ask one thing, which theme you are using, because its not same as default ... looks awesome ...
---------- Post added at 12:18 PM ---------- Previous post was at 12:15 PM ----------
CacingKalung said:
Screenshots attached. My installed miui has been patched to change carrier name with "CacingKalung" but the one I shared has not been patched.
Sent from my CSL-MI410 MIUI 2.3.9 using tapatalk
Click to expand...
Click to collapse
Even we can change the carrier name through MIUI Extended setting, are you speaking about the same patch / apk ....

vivekb said:
Sorry, I forget to update after I corrected it.
I followed the same process and I got the result.... Anyway thanks bro...
Click to expand...
Click to collapse
How's the result?
Sent from my CSL-MI410 MIUI 2.3.9 using tapatalk

CacingKalung said:
How's the result?
Sent from my CSL-MI410 MIUI 2.3.9 using tapatalk
Click to expand...
Click to collapse
working perfectly, able to install apps ,
which theme you are using, looking nice CK..
Edit : I got it , its TSF shell .....

vivekb said:
working perfectly, able to install apps ,
which theme you are using, looking nice CK..
Edit : I got it , its TSF shell .....
Click to expand...
Click to collapse
Great....
Yes I'm geting to use TSF. Reminding me of spb months ago...
Sent from my CSL-MI410 MIUI 2.3.9 using tapatalk

@Vivek, How's the battery life?

paarkhi said:
@Vivek, How's the battery life?
Click to expand...
Click to collapse
Right now can not comment on battery life, just installed in Morning only,
but facing some problem,
1. GPS, not working for me
2. Wifi too not working for me
need to check it again ...

vivekb said:
Right now can not comment on battery life, just installed in Morning only,
but facing some problem,
1. GPS, not working for me
2. Wifi too not working for me
need to check it again ...
Click to expand...
Click to collapse
Weird... I tested out everything before I share, everything works fine for me.
(And for changed carrier name, I did it without any apk, just put in eri.xml file at data partition)
Sent from my CSL-MI410 MIUI 2.3.9 using tapatalk

CacingKalung said:
Weird... I tested out everything before I share, everything works fine for me.
(And for changed carrier name, I did it without any apk, just put in eri.xml file at data partition)
Sent from my CSL-MI410 MIUI 2.3.9 using tapatalk
Click to expand...
Click to collapse
Awesome CK, everything working as before upgraded from your earlier build.
TSF shell hogs Mem like SPB ???
Wanted to know if there will be any impact if I flash your earlier build's patch release on this rom (unless you have taken care of it while porting). Battery seems to be draining a little more than the previous version, but I need to observe for couple of more days...had many calls from morning also.
For the first time the Radio app displayed the freq display along with the buttons to tune and looked like it was ready to take in my desired freq !!!...of course it did FC a little later but def for a moment it raised my hopes of a working FM on MIUI...guess we are only getting closer to resolving it. and hope MIUI folks keep releasing updates for GB !!!!

KEMIUI​It's "Me You I" - Say It Right​Android 4.0.4 ICS / MIUI 2.8.10
Based on CyanogenMod 9 + MIUI 2.8.10 Galaxy W​
ROM Specifications
I used this guide to port the CM9 ROM into MIUI
Source ROM: MIUI 2.8.10 for Galaxy W
Target ROM: Jocala's CyanogenMod 9 KANG for the Exhibit II
This will have bugs from jocala's CM9 KANG because it is based on it.
Assumed Working Though Untested
Voice Search
Phone
Wifi
SMS/MMS
GPS
Bluetooth audio
HW accelerated display
Headphone detection
Microphone detection
Camera (Front/Rear/Pano/Video/Flash)
Market/Play
Gmail
Browser
Screenshots
Streaming video
What isn't Working
Capacitive lights don't turn on but the do work
Only Internal SD card is visible when plugged into computer
USB Tethering
Bluetooth audio for sip/skype/etc
Torch / MIUI Flashlight App (Possible Market alternatives)
CRT Removed (Trying to get that back)
Credits
dswaggz - For requesting MIUI port so much.
Cyanogen - For CM9
jocala - For the CyanogenMod port to the Exhibit II
VanillaTBone / AndroidSamari - For starting development on the Exhibit II
arco and darthjonathan - From the Samsung Galaxy W for help with 2.3 patchrom and CM9
bmgreatness <-- Current Developer for 4.0.4 Updates
IRX120
File Hosting from Dev-Host
Check out Ultimate Phone Guide at my signature
Everyone else I forgot.
Extra App(s):
Soft Buttons Light - Google Play - This app will "fix" the capacitive key backlight LEDs except the lights remain on until turning off the screen. (Thanks to AkiroX for recommending)
MIUI Weather (Enables Weather widget)
(Flashable) Addon:
Center Clock/ Custom Carrier Text (Modded MIUI control panel found on MIUIandroid)
Installation:
This has the same issues as CM9 for the exhibit II. If you can't tolerate the issues don't use this.
*KEMIUI 2.8.10 R2.3* Download (10/08/2012)
Flash the zip file in recovery as you would any other normal ROM.
You must do a factory reset prior to booting into the new ROM or you will encounter FC's and UI issues.
Google Apps are preinstalled.
I originally ported MIUI to the Galaxy Exhibit but currently can no longer directly support it. I bricked my Exhibit back in June and moved on to a GSM Galaxy Nexus. The warranty is still valid so I could return the Exhibit for repair, but that's not my main priority right now. I might return to help this phone in the future but for now other members of the community are updating and supporting this ROM. I just update the OP so thanks to them for bringing life to an underappreciated ROM and keeping my first official release alive.

Changelog:
.01 (03-18-2012)
-Initial Release
-Based on CM9 KANG 0.1 / Galaxy Nexus 2.3.16 MIUI.us
.03 (03-24-2012)
-Second Release
-Now Based on CM9 KANG 0.3 / Nexus S 2.3.16 MIUIAndroid
-Fixed Wifi Reboot Bug
-New Official Graphics
-Removed on-screen keys
.04 (03-27-2012)
- Updated MIUI build to 2.3.23 (RC Branch)
- Updated CM build to 06.kang.test
- GPU Improvements
- Removed Applications: MIUIHome, Updater, Permissions, User Feedback, Stats
- Added Applications: Superuser, Titanium Backup, GO Launcher
- New Clock App from latest MIUI
- New Settings App layout
- Various improvements to both the Contacts and Phone Apps
R2 (8-16-2012)
- Built by bmgreatness
- Updated to MIUI 2.8.10
- Updated GApps
- Used Galaxy W MIUI base
- Used More Recent CM9 base
- Camera Working
- Fixed some issues with VoIP apps
bmgreatness's changelog for R1 > R2
- More default icons
- Removed Stock ICS gallery (MIUI is already installed)
- Voice Search is fixed (No need to flash gapps)
R2.2 (8-20-2012)
- Capacitive Lights non-working
- Fixed SD/ Ext SD viewing on PC
- Play Store Fix
- Issue: After file transfer the external SD doesn't always remount. To fix just remove and reinsert the sd card. May require rescan
R2.3 (10-08-2012)
- Updated to Lasted CM9 build
- CRT Animation Temporarily Removed
- Posted MIUIAndroid Control Panel as a Flashable Mod

Latest Release Notes:
Read the red OP text and changelog.
Thanks to Everyone.

Wow, guess whose dream just came true? Now that person will get out of our hairs forever! No not really.
Anyway nice job, really nice progress on the phone. Will give it a spin when I have time.

KemikalElite said:
KEMIUI​It's "Me You I" - Say It Right​Android 4.0.3 ICS / MIUI 2.3.16
Based on CyanogenMod 9 + MIUI.us Galaxy Nexus​
ROM Specifications
I used this guide to port the CM9 ROM into MIUI
Source ROM: MIUI 2.3.16 for GSM Galaxy Nexus
Target ROM: Jocala's CyanogenMod 9 KANG for the Exhibit II
This will have bugs from jocala's CM9 KANG because it is based on it.
Assumed Working Though Untested
Phone / Voice
Wifi
Messaging
GPS / Location Services
Bluetooth
Headphones
Google Market/Play/Apps
Browser + Most Other Stock Apps
What isn't Working
Wifi disconnect bootloop bug from CM9 KANG
Network Time Zone (set time zone manually in settings)
Camera
Microphone for anything other than native voice calls
Google Calendar Sync (unconfirmed)
Update App (This is designed for other officially supported devices. I recommend not using it as this is an unofficial release.)
ROM Manager (Not supported on this device. DO NOT USE. FC's and causes screen static.
Torch / MIUI Flashlight App
Transparency Visual Effects cause screen static
Boot animation doesn't fit perfectly within screen border
Whatever else.
Credits
dswaggz - For requesting MIUI port so much.
Cyanogen - For CM9
jocala - For the CyanogenMod port to the Exhibit II
VanillaTBone / AndroidSamari - For starting development on the Exhibit II
arco and darthjonathan - From the Samsung Galaxy W for help with 2.3 patchrom and CM9
kenmood / mekaziah - General Advice
Jakos Katarune - Support / Graphic Design
Alan Miller - Support / Windows Phone User
Carter Dukes - Ultimate Phone Guide Admin
File Hosting from Dev-Host
Check out Ultimate Phone Guide at my signature
Everyone else I forgot.
This is a first test build. Most everything is working from MIUI. This is a ported build based on the GSM Galaxy Nexus 2.3.16 MIUI English US build from MIUI.us and the CyanogenMod 9 KANG build for the Exhibit II from jocala. The on-screen buttons are enabled in this build. I should remove them in the next release because they consume space on the screen. The screen turns to static when navigating through menus that dim the background (popup selection).
Installation:
This has the same issues as CM9 for the exhibit II. For example Camera and VoIP are broken for now. If you can't tolerate the issues don't use this.
Download The miui_ancora_target.zip 180.25 MB
Flash the zip file in recovery as you would any other normal ROM.
You must do a factory reset prior to booting into the new ROM or you will encounter FC's and UI issues.
Google Apps are preinstalled.
Click to expand...
Click to collapse
Hahahaha I actually burst out laughing at the first person you thanked, thought it was hilarious. On topic, great job Kem! We're getting more and more interest in the device every day it seems and you're helping move the process along. Thank you!

I laughed to makes me feel important but any u no su I'll be able to flash back right
ⓥⓘⓐ⇨EII4G♛ⓧⓠⓤⓘⓩⓘⓣ ♝3.9&ⓥ6supercharged☜
ⓩⓞⓞⓜ⇨ⓩⓞⓞⓞⓜ™©

Congratulations!

dswaggz said:
I laughed to makes me feel important but any u no su I'll be able to flash back right
ⓥⓘⓐ⇨EII4G♛ⓧⓠⓤⓘⓩⓘⓣ ♝3.9&ⓥ6supercharged☜
ⓩⓞⓞⓜ⇨ⓩⓞⓞⓞⓜ™©
Click to expand...
Click to collapse
Why don't you find out yourself? You can always ODIN back. Just a note, to be a tester you must be willing to test things yourself, otherwise why would you hold that title?
Sent from my SGH-T679 using xda premium

Okay let me start this post saying that I have almost no sleep and hopefully will not fall asleep in the process of composing this like last time.
The last 18 hours or so has been a crazy process of emotions with rage at the MiCode PatchROM. At 9:20 AM dswaggz PM'ed me about the MIUI ICS source. I took a look on github and saw that the MiCode team had posted the ICS branch with good English instructions. I start up my virtual machine and download the source and it takes a while for me to get ADB working through Virtualbox. I setup the environment and execute the command that pulls everything from the phone and nicely packages it into a stockrom.zip when I finally get to the make fullota command I get a fatal error similar to the one that had stopped me on gingerbread. I look back at github and see that MIUIAnderson has posted a response to someone that has encountered the same problem. According to the MiCode team the Patchrom only works with actual OEM ICS stock ROMs. They had stopped supporting AOSP-based ROMs to due too many bugs.
Thinking about this realistically how many devices have a goal of the new MIUI and actually have a 4.0 stock ROM? This would limit the new MIUI to devices with official firmware updates and new devices running 4.0 right out of the box. Well what about the devices that won't get an upgrade? I thought about the Kindle Fire and remembered that they had an ICS version of MIUI even though there only stock version was 2.3.5. Searching around I found some more MIUI ROMs that were built on top of CM9 and other AOSP ROMs. Continuing to look around these forums I found a guide for a process that I now refer to as manual patching process or "manupatch". Since the Patchrom was so complex compared to this more basic method I couldn't believe it could work.
I had fused together a MIUI build from another device with the CM9 AOSP ROM from this device and it actually worked! So a big thanks to master expert porter proxuser here on xda. The link to that thread is in the OP.
I'm not sure if its just me but the stock browser seems so smooth and fast almost as if it has acceleration. I do notice that in certain parts of the user interface and browser that the screen starts flickering, pixelates with static, and generally freaks out. I think this might be some sort of GPU render bug since it gets worse when I enabled forced GPU acceleration. Maybe this is caused from using the Galaxy Nexus build as the source ROM, maybe its a glitch between the MIUI and CM parts in the target ROM.
I can't believe that of all things the su binaries for root access are missing. I kept wondering why root explorer wasn't working. I'm going to work on the device specifics for the exhibit in this ROM. Taking out the Updater app, ROM Manager, Status LED options, removing the on-screen buttons to allocate for more screen space, and switch out the boot animation.

When u add the su binaries I'm so down an maybe the method u used for this might work with gb u think kem
ⓥⓘⓐ⇨EII4G♛ⓧⓠⓤⓘⓩⓘⓣ ♝3.9&ⓥ6supercharged☜
ⓩⓞⓞⓜ⇨ⓩⓞⓞⓞⓜ™©

Hey cm9 has been updated
ⓥⓘⓐ⇨EII4G♛ⓧⓠⓤⓘⓩⓘⓣ ♝3.9&ⓥ6supercharged☜
ⓩⓞⓞⓜ⇨ⓩⓞⓞⓞⓜ™©

Omg 1st of all i want to thank you Kemikal for this release. 1 thing i notice is tht i get a tremendous lag on the UI but after a few reboots it went away. another BIG thing is that i get NOO lag when playing games which is just lovely. So is this based on Jocala's Cm9 .03 ? or .04
And are you planning to keep the galaxy nexus on screen buttons? Because im loving that also.

pixeltrailz said:
Omg 1st of all i want to thank you Kemikal for this release. 1 thing i notice is tht i get a tremendous lag on the UI but after a few reboots it went away. another BIG thing is that i get NOO lag when playing games which is just lovely. So is this based on Jocala's Cm9 .03 ? or .04
And are you planning to keep the galaxy nexus on screen buttons? Because im loving that also.
Click to expand...
Click to collapse
Yeah this rom is really fast with the browser too. This is built from .03
The next release will be built from .04 as it has just been updated a few hours ago. I will be dropping the on screen buttons as they take up space on the display. Maybe I can think of a way to set that as a toggle or something similar.
After another reset I don't see to be getting any of that crazy static. Everyone try to keep an eye out for any visual errors, like if the screen display gets distorted. I'm trying to rebuild CM9 to have a pure direct source for this ROM but I keep getting build errors and my computer keeps dropping connection to github again. So for now I'm just sticking with jocala's release builds as they are stable.
I'm switching to a SGS build for the MIUI parts so we'll see what happens with the next release. I also plan to port this to the Fire, Atrix, Optimus. My next release should be up by late tonight.

Awesomeness did u fix su problems an themes work right?
ⓥⓘⓐ⇨EII4G♛ⓧⓠⓤⓘⓩⓘⓣ ♝3.9&ⓥ6supercharged☜
ⓩⓞⓞⓜ⇨ⓩⓞⓞⓞⓜ™©

dswaggz said:
Awesomeness did u fix su problems an themes work right?
ⓥⓘⓐ⇨EII4G♛ⓧⓠⓤⓘⓩⓘⓣ ♝3.9&ⓥ6supercharged☜
ⓩⓞⓞⓜ⇨ⓩⓞⓞⓞⓜ™©
Click to expand...
Click to collapse
Wait whats wrong with themes?

No no I'm asking do they work an did u fix su privileges an if I flash the first rom I'll be able to flash back right or should I just wait
ⓥⓘⓐ⇨EII4G♛ⓧⓠⓤⓘⓩⓘⓣ ♝3.9&ⓥ6supercharged☜
ⓩⓞⓞⓜ⇨ⓩⓞⓞⓞⓜ™©

dswaggz said:
No no I'm asking do they work an did u fix su privileges an if I flash the first rom I'll be able to flash back right or should I just wait
ⓥⓘⓐ⇨EII4G♛ⓧⓠⓤⓘⓩⓘⓣ ♝3.9&ⓥ6supercharged☜
ⓩⓞⓞⓜ⇨ⓩⓞⓞⓞⓜ™©
Click to expand...
Click to collapse
Yeah Themes work. Downloading Themes from the MIUI Apps works too.
SU will be fixed in the next release. You could flash back just by holding the volume up to reboot into recovery.

Awesome thanx
ⓥⓘⓐ⇨EII4G♛ⓧⓠⓤⓘⓩⓘⓣ ♝3.9&ⓥ6supercharged☜
ⓩⓞⓞⓜ⇨ⓩⓞⓞⓞⓜ™©

Damn links down f#$%&-
ⓥⓘⓐ⇨EII4G♛ⓧⓠⓤⓘⓩⓘⓣ ♝3.9&ⓥ6supercharged☜
ⓩⓞⓞⓜ⇨ⓩⓞⓞⓞⓜ™©

Google calender is working

Kind of Introduction to this new project:
First of all, we want to say thank you to all Jellaxy team (CM10) and MaclawStudios & Wayland Ace (CM9).
bieltv3 --> CyanogenMod 10 - Jelly bean
Daredj --> CyanogenMod 9 - Ice cream Sandwich [DIscontinued]
Don't ask for estimated time of arrival (ETA).
Credits
* All Jellaxy team
* Lagloose -> for help me all the time
* WaylandAce -> for helping Daredj and me as well
* Nims11
* MaclawStudios
* Erikcas -> for provide Kernel and help me alot
* phtibu - not registred in this forum but many thanks to him

CM10
CyanogenMOD 10​Bieltv3 compilation​
Features:
GSM (phone/messages/GPRS/EDGE/3G)
Wifi
Bluetooth
Sound / Headphones
GPS
Sensors
Buttons backlight
Browser
Games
YouTube
Deep sleep
Live Wallpapers
Project Butter
CRT-OFF Animation
Camera - can take photos
Motion blur - no more lag on status bar
Video Recording (very lag)
HQ still laggy
Battery stats
OMX introduced (thanks erikcas and rashed97)
SuperUser
HQ video playbakc FULLY WORKING
Camcorder (laggy)
Bugs:
Native USB tethering
Native Wi-Fi tethering
Need to improve camcorder to get a fully working video recording
Google Now (Voicesearch)
Requisites:
CWM5
Installation:
Wipe data/factory reset => wipe chace => Advanced/Wipe Dalvik cache
Install zip from SD card / choose zip from SD card
After installation reboot system now
Boot must be about 5 minutes
Download:
RC1: http://www.mediafire.com/?o2b99mabk55obpc
BETA 3: http://www.mediafire.com/?llc7orrwgs5mz00
BETA 2: http://www.mediafire.com/?6z6w9c0lnhwfkyy
BETA 1: http://www.mediafire.com/?5rivkmu6v44h7mo
Changelog:
- RC1:
Compiled from my sources (based on wayland and jellaxy), with the new kernel erikcas
Setting new kernel
Data usage running (again kernel)
IPv6 Networks (again kernel)
Added zipalign binary
Added support for scripts userinit.sh
Fix for audio (sound notification bug should disappear)
Sounds new operating system
New memory management OOM
Wifi should be more stable now and connect faster
Latest CM10 sources (12/07/2012)
KSM SIO Configuration and fixed
Camcorder running (laggy)
Youtube Video HQ and work (many thanks to erikcas and rashed97)
Jellybean camera running (includes video recording, very lag yet)
Apollo Reemplazad by Play Music and removed Music.apk
New keyboard (white sub keys)
Again Live wallpapers
GAPPS from sources included
Contact sync working, no patches needed
- BETA 3:
CyanogenMod Changes:
Added CM file manager with root acces
Added video editor
Added Sound Recorder
Added button in CM10 task Killer
Updated CM sources - STABLES
Jellaxy and my changes
Not fully based on Jellaxy (just device config files, kernel, framework) -> "pure CM10" (that's why is bigger than jellaxy build)
Removed some apps (too big for galaxy ace stable CM10)
Original File Manager
All live wallpapaers
All notifications / ringtones / alarms
Video editor CM (too big)
Superuser Working and remembering things
Introduced OMX libraries (very BIG thanks to Erikcas and Rashed97 for their incredible work)
Reproducing LQ Video perfect and no lag
HQ Video a bit laggy
Replaced Legacy camera with JELLY BEAN CAMERA WORKING, best quality in pictures and smooth
System faster than ever with OMX
Video recording working (VERY LAG)
Fixed Network Location
People that have problems with contact sync flash this too (mount system): http://www.mediafire.com/?u2z4iy52z6nw3cb
- BETA 2:
Camera working (100% - photos and panorama)
Video recording working (but usually crashes)
Camera doesn't break deep sleep (no more can't connect to camera)
Calculator working (for some people: calculator wasn't working)
Sources updated to 31-10-2012
zRam (compcache) working
Heapsize is 64Mb now
Heapgrowthlimit is 32Mb now
Back to standard GPS config
Fixed Network location
Phone doesn't stay in a ended call...
- BETA 1:
All Jellaxy changes 12.10.2012 (Features)
Sources updated - Android 4.1.2
Camera working (panorama and photo) - thanks to lagloose and wayland
CRT off animation fixed by bieltv3
Remember
I'm not responsible of what happens to your phone, all the release are tested for me and for betatester we know, so it's your option to install-it or not

CM9
CyanogenMOD 9
Wayland Sources - Compiled & edited by Daredj
DISCONTINUED - USE WAYLANDS FRESH SOURCES
LINK TO THREAD
​
Features:
Camera (Don't record Video, use 3rd-party app)
Wifi
GSM (phone/messages/GPRS/EDGE/3G)
Bluetooth
HW acceleration
Sensors.
Market.
Backlight
Sound/Headphones
GPS/AGPS (if not working, use Mardon patches...)
Animations/CRT OFF.
ICS keyboard
Games
YouTube (HQ PLAYING)
Deep sleep
Wifi signal indicator
Android mass storage.
Live Wallpapers
FM Radio (Need Spirit FM, not included)
Rooted
Init.d Fully working
Live wallpapers
Signal Indicator Working 100%
Torch.
Battery Stats.
Bugs:
Video recording not working
Speech to text doesn't work.
Network location.
Requisites:
CWM5
SpiritFM(For working radio) - Not Obligatory!
Videocam Ilusion(For working Videorecording. BAD QUALITY) - Not Obligatory!
Instalation (RC2):
All wipe
Format /system/ ONLY IF YOU HAVE PROBLEMS INSTALLING!
Install RC2
Profit
Instalation (RC1):
Install Beta3
Install RC1 without wiping
Profit
Instalation (BETAS):
Full wipe, dalvik too
Install zip
Profit
Download
RC2 - http://www.mediafire.com/?5p09hl5hyf3rrle
RC1 - http://www.mediafire.com/?yu82jnlla3121yb
Beta 3 - http://www.mediafire.com/?zzgp7ehlqhae3g3
Beta 2 - http://www.mediafire.com/?893h53117lpr6cg
Beta 1 - http://www.mediafire.com/?3p19vkq2944scb9
Changelog
RC2:
Fixed SU (again, using superuser).
Fixed battery stats.
Added OMX libs (thanks to all people who made tweaks and zips, you are a lot!!).
RC1:
FIXED ALL SENSORS.
Fixed SU.
Live wallpaper PhaseBeam Added.
Keyboard Fixed.
Beta 3:
Torch added.
Fixed signal bar.
Live wallpapers working.
Beta 2:
Updated Wayland Sources.
Camera Working (No video recording) NO DEEP SLEEP.
Some fixes (IF IS NOT ON BUGS MEANS SOLVED, IF YOU FIND ANY NEW ADD ON POST AFTER READ THIS).
Removed RomManager.
Beta 1:
Initial Release, First Compilation bases on Wayland sources and Nims11 kernel.
Most parts working unless Camera.
Signal Indicator Stucked at 2 bars.
NOTE (for rom-makers themers and people who use this rom as base):
As you know, there is a BIG AMOUNT of CM9 for ACE, by different devs (since ICS was released). For make easier bug-controls PLEASE SAY IF YOU USE THIS ROM AS BASE.

On the Beta 3 there is a problem with gapps:
As long as CM10 with gapps is too heavy for our decice, (that causes some issues that won't happen normally)
SOLUTION: (must test, and try to improve it)
you must delete something to install it, I recommend LatineMe.apk (keyboard)
Install again the gapps (lite by pedrojuuu)
Install a keyboard from play syore or via apk
And everything will be OK

PATCHES:
Mardon said:
Binary is also in the supersu cwm package included and needs to be installed.
But i cant flash the pack from chainfire via cwm!
So i integrated supersu and binary into rom zipfile and flashed the modified rom zip.
Now everything su related works.
No more su problems on cm9 rc1 now
SuperSU allows for advanced management of Superuser access rights for all the apps on your device that need root. SuperSU has been built from the ground up to counter a number of problems with other Superuser access management tools.
CWM-SuperSU-v0.97.zip is the filename from the package of chainfire
http://download.chainfire.eu/267/SuperSU/CWM-SuperSU-v0.97.zip
Xda supersu thread
http://forum.xda-developers.com/showthread.php?t=1538053
Attached file is CWM flashable zip for Galaxy ACE
credits: chainfire for files
Gesendet von meinem PASCAL2 mit Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=1456289&d=1352047019
Mardon said:
Here now the Torch fix for cm9 beta2 build.
Now Torch button works.
Flash via CWM
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=1434936&d=1351345995
PedroJuuu said:
Keyboard fix for CM9 created and tested by me
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=1450889&d=1351860678
Current Status:
Detected problem with google location... trying to fix
Fixed Compass
Fixed SU!!! (wayland awesome work)
Fixed Keyboard (PedroJuuu works!)
Testing more stuff

Are u also going to update aokp JB / ICS
And or PAC rom?
Anyways thanks
Sent from my GT-S5830 using xda premium

CoolCatGetHome said:
Are u also going to update aokp JB / ICS
And or PAC rom?
Anyways thanks
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Not yet, we want to have a complete CM and then base in other such as AOKP... we think is better to focus just in one
Enviado desde mi GT-S5830 usando Tapatalk 2

bieltv.3 said:
Not yet, we want to have a complete CM and then base in other such as AOKP... we think is better to focus just in one
Enviado desde mi GT-S5830 usando Tapatalk 2
Click to expand...
Click to collapse
You know it would be great if you start working on arko's HAL like lagloose said, because wayland's still disrupts deep sleep.

biswatmak said:
You know it would be great if you start working on arko's HAL like lagloose said, because wayland's still disrupts deep sleep.
Click to expand...
Click to collapse
We're working on solve deep sleep, we think is easier than make preview working on arko's
Enviado desde mi GT-S5830 usando Tapatalk 2

On CM 10: call waiting isn't there... The operator says that the call is waiting, but nothing on the phone. Not even in call logs. Can't even have a conference call...

CM9 is f****** awesome, so smoother and faster, waiting for camera
I will try CM10 to see if it's as smother and faster as CM9. GREAT WORK
Enviado desde mi GT-S5830

PedroJuuu said:
CM9 is f****** awesome, so smoother and faster, waiting for camera
I will try CM10 to see if it's as smother and faster as CM9. GREAT WORK
Enviado desde mi GT-S5830
Click to expand...
Click to collapse
We're waiting for your reviews.
PD: Nice to see you again

i installed cm9 last night...it is unbalievable... very very fast , very very smooth...good battery life... good ram management...just awesome!!!
t think at the moment is on of the best...(i dont use camera) . congratulations guys , excelent work...keep on the good work.

bieltv.3 said:
We're waiting for your reviews.
PD: Nice to see you again
Click to expand...
Click to collapse
I found this bug on keyboard CM9 and I tested CM10 and is not as faster and smother as CM9 although I know you will get CM10 faster and smother eventually.
Enviado desde mi GT-S5830

Bieltv.3, how did you get CM9 so smooth? Cant you implement it some how to CM10 xD, not an eta, just a question

dhalham said:
Bieltv.3, how did you get CM9 so smooth? Cant you implement it some how to CM10 xD, not an eta, just a question
Click to expand...
Click to collapse
Cm9 uses wayland sources and is compiled by daredj.. is this cm9 the same you can find in wayland's topic compiled by daredj?? If yes, this rom is the best I've ever tried, if no I'll try it
Inviato dal mio Cooper con cm9

Toni5830 said:
Cm9 uses wayland sources and is compiled by daredj.. is this cm9 the same you can find in wayland's topic compiled by daredj?? If yes, this rom is the best I've ever tried, if no I'll try it
Inviato dal mio Cooper con cm9
Click to expand...
Click to collapse
Is based in wayland sources and compiled by daredj and modifyied by us and no is a diferent one, a new one
Enviado desde mi GT-S5830 usando Tapatalk 2

Bieltv.3 How did you get CM9 soo fast and not CM10?

that sound awesome
just one question if i installed camera illusion on cm9 ,camera will work or not ??

After camera use ...
Deep Sleep Work in CM10?

Hi,
After almost 2 weeks of working on something that didn't have progress (ldpi resizing, for the ones who missed it), I decided to do something that has a chance to succes.
I succesfully build AOKP today. It is my weekend project, so I am off for the weekend now. Been testing, and everything that works in Androidarmv6 CM-10.1 works on AOKP.
I.m.o. camera, camcorder and panorama are working even better then in CM-10.1
I decided that if there is no pain, there is no gain. So I compiled for Mini and Fit too. (actually Fit is still compiling atm).
For Fit, Mini and Galaxy5 I took TheWhisps resized overlay from AOKP JB and it compiled without complaining.
So for all of you who want AOKP with a (minor?) change to a workeable layout, here it is.
My goal was to stay as close to AOKP as possible. For hardware (Qcom part) I used the CM/Androidarmv6 parts. It is well done, in words of support, so why not use it.
For frameworks, I decided to port all our fixes for YouTube, camera, EGL over to AOKP sources. Taking androidarmv6 might have been an easier choice. But in my mind, AOKP is much closer to AOSP, therefore more lightweight and if succesfull porting is possible, why not?
The rest of it is all AOKP source
Downloads in second post!
Here you will find the AOKP manifest and here you will find my mods.
What is working? What not?
Like I said, everything what is working in Androidarmv6 here works on AOKP. You tell me please!!
Special thanks and credits to all androidarmv6 members!
Screenie (more to follow):
View attachment 1774394

If you come from a non AOKP rom, I strongy recommend to full wipe. I also had to wipe my battery stats!
Downloads:
aokp_tass_nightly_2013-06-30
aokp_tass_nightly_2013-06-18
AOKP 02.04.2013 buid: http://www.androidfilehost.com/?fid=22897186102575343
md5: 174d33054d2aad5b99d6434ad19ebca3
aokp_tass_jb-mr1_Mar-09-13
md5: cb1fcc618989eac762db15f837303f58
aokp_tass_jb-mr1
md5: 600e33f353468f8e04d5ea468f1d7e84
Changelog
30-06-2013
Introduced smartassv3
lots of aokp updates
Fixed a light issue (there is still a light management issue, but lights are of now on screen out after changing brightness
too much I did forget
Main: much resizing, credits millo1978 // ehsan-black // ?? (forgot you? pm me! will add you!)
implemented FM support, still wip, NOT(!) operational yet.
new kernel. Still 2.6.35, but based on stock Samsung sources source here
Fixed battery stats
Improved memory management (Reintroduced. Based on an idea from Lagloose in Jellaxy. Testing stage)
Some extra ringtones
Latest AOKP sources
09.03.2013
Fixed layout for ldpi by Dark Passenger (many thanx to him)
systemUI FC fixed
kernelfix for BT tethering (Thanx for suggestion to my old pal TheWhisp)
various changes from AOKP
Added exhange and email
02.03.2013
Initial release
Known issues:
sdcard not deteted on mini/fit

Re: [ROM]AOKP jb-mr1[WIP]
Nice work
Sent from my GT-S5570 using Tapatalk 2

Wow.. New cusrom.. I have to try..
Thanks.. You added one to my customrom collection.. great work.. sir!

It means, it is a stable almost like cm10.1 but, is AOKP. So, settings are different only right??

Downloading. Thanks for everything you done and sorry if i have let you bored :/

thank you very much sir..u r doin an awesome job with ldpi devices

Reporting bugs :
Hi erikcas, tested this rom.. as mentioned.. really work in progress..
Following are the bugs:
1. Tile View not working-
When we click on that tile view icon in statusbar.. nothing appears.
2. In statusbar toggles changing settings, when ticked "sound state" statusbar FCs.
3. Major bug.. (dont know if it is happening only with me..) But,
System is not detecting SD-Card.
When opened camera.. popup appears that "Insert Sd-card to capture pics". Tried removing, taking back, rebooting.. no effect..
Note: File managers ARE detecting sdcard.
Good work.. performance is good. Nice rom.. just a little more work needed.. Thanks.

Re: [ROM]AOKP jb-mr1[WIP]
oj_buddy said:
Hi erikcas, tested this rom.. as mentioned.. really work in progress..
Following are the bugs:
1. Tile View not working-
When we click on that tile view icon in statusbar.. nothing appears.
2. In statusbar toggles changing settings, when ticked "sound state" statusbar FCs.
3. Major bug.. (dont know if it is happening only with me..) But,
System is not detecting SD-Card.
When opened camera.. popup appears that "Insert Sd-card to capture pics". Tried removing, taking back, rebooting.. no effect..
Note: File managers ARE detecting sdcard.
Good work.. performance is good. Nice rom.. just a little more work needed.. Thanks.
Click to expand...
Click to collapse
Same issues in fit also....
Sent from my GT-S5670 using xda premium

Re: [ROM]AOKP jb-mr1[WIP]
oj_buddy said:
Hi erikcas, tested this rom.. as mentioned.. really work in progress..
Following are the bugs:
1. Tile View not working-
When we click on that tile view icon in statusbar.. nothing appears.
2. In statusbar toggles changing settings, when ticked "sound state" statusbar FCs.
3. Major bug.. (dont know if it is happening only with me..) But,
System is not detecting SD-Card.
When opened camera.. popup appears that "Insert Sd-card to capture pics". Tried removing, taking back, rebooting.. no effect..
Note: File managers ARE detecting sdcard.
Good work.. performance is good. Nice rom.. just a little more work needed.. Thanks.
Click to expand...
Click to collapse
1 & 3: I now realize copying the overlay 1 on 1 is wrong
Will correct that.
2: can confirm that on gio too. Will debug it and correct
droider007 said:
Same issues in fit also....
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Verstuurd van mijn GT-S5660 met Tapatalk

so should we wait for your fix, regarding sd card mounting (if its gonna be via update zip) and download this verse or wait for full rom release?

Must try
Downloading now. Thanks for your effort

Nixoman said:
so should we wait for your fix, regarding sd card mounting (if its gonna be via update zip) and download this verse or wait for full rom release?
Click to expand...
Click to collapse
+1
about the method of ext release is it a patch(update.zip) or full fledged ROM.

erikcas said:
1 & 3: I now realize copying the overlay 1 on 1 is wrong
Will correct that.
2: can confirm that on gio too. Will debug it and correct
Verstuurd van mijn GT-S5660 met Tapatalk
Click to expand...
Click to collapse
Ok.. then thank you. will wait for next updatd.

will be a full rom, as much sources (AOSP+AOKP) are updated since yesterday. An update would be almost a full rom

oj_buddy said:
Hi erikcas, tested this rom.. as mentioned.. really work in progress..
Following are the bugs:
1. Tile View not working-
When we click on that tile view icon in statusbar.. nothing appears.
2. In statusbar toggles changing settings, when ticked "sound state" statusbar FCs.
3. Major bug.. (dont know if it is happening only with me..) But,
System is not detecting SD-Card.
When opened camera.. popup appears that "Insert Sd-card to capture pics". Tried removing, taking back, rebooting.. no effect..
Note: File managers ARE detecting sdcard.
Good work.. performance is good. Nice rom.. just a little more work needed.. Thanks.
Click to expand...
Click to collapse
1. actually works fine.(galaxy fit)
2 & 3 confirmed.
@Erikcas can you get launcher2 layout to trebuchet (not the workscreen layout but the icon sizes) and also this doesn't have the lockscreen glitch.
Launcher bug : the workscreen extends from the bottom of the statusbar(even though there is persistent search bar) all the way to the bottom of the screen (I.e below the dock).
also performance settings got reszing bug.
and toggle setup is slightly off to the right. (the Main screen)

Friends! I find microphone BUG when dialling((( Please - to check this))) because I don't may send logcat(((

Odp: [ROM]AOKP jb-mr1[WIP]
alexey 62 said:
Friends! I find microphone BUG when dialling((( Please - to check this))) because I don't may send logcat(((
Click to expand...
Click to collapse
Confirmed
Sent from my GT-S5570 using xda app-developers app

One more thing. when I enable navibar, my homescreen sinks, bottom row overlap with dock bar

need a tester.. Please PM me

The purpose of this thread is to show the current status of CM 11 (Android 4.4 KitKat) on the P990 (LG Optimus 2X) and to discuss the various builds that may appear.
I will try to keep this post updated with the latest info about CM 11 for our p990. If you guys find new information that you think should be in this post, then please make a post about it.
Please remember that there is no support for any bugs you might find in builds listed here!
You are very welcome to post about stuff that is broken, which has not been discovered before and I will then include it in the working / not working section below.
Status:
@tonyp have released a new test build (cm-11-20140120-UNOFFICIAL-p990) and here are his notes for it:
tonyp said:
Last notes:
As always thx to @hjuuni for his great work, without him this wouldn't be possible.
The kernel is NOT updated! Do that yourself.
The PerformanceControl app you'll find in the Appdrawer is there by accident and is a _different_ version than the one baked into the settings.
Don't use it, or just remove the apk from /system/app.
The reason for stuff like that is simple: This is an alpha testbuild for myself which I'm just sharing because I haven't released anything in a while and am going to be busy again during the next days.
Once I do a proper release I will of course polish it.
So don't complain, if you do I just don't share the testbuilds anymore, easy as that :cyclops:
Click to expand...
Click to collapse
The working / not working list looks a little better for this build and the changes are great, so I think it is just a matter of stability if you are thinking about running this build as a daily driver. I can't conclude anything about stability just yet though.
If you dirty flash this build over your current CM 11 ROM then remember to do this first:
pengus77 said:
For those of you having issues with the hardware keys (not working after dirty flashing) I found reason and solution
Most probably you had (like me) the google keyboard selected as default before flashing the new build... which removes it. This leaves the rom without a default input system, which in turn blocks also the events from the hw buttons (excluding home apparently). To fix this, just go to settings -> input and click the little settings icon on the right of the aosp keyboard. By doing this, that keyboard will become the new default one and everything will work again. Have fun
Click to expand...
Click to collapse
The previous build (cm-11-20131226-UNOFFICIAL-p990) is working very well as a daily driver if you can live without BT calls and wifi tethering.
The builds come with kk alpha 15 by @pengus77 and a mini gapps package.
To read more about the status of the KK 3.1 kernel check this thread: [KERNEL][stable: M1 (2.6.39.4) - exp: Alpha 28 (3.1.10)] Kowalski Kernel.
Most stable test build: cm-11-20131226-UNOFFICIAL-p990 or cm-11-20140120-UNOFFICIAL-p990?
Latest test build: cm-11-20140120-UNOFFICIAL-p990
Please don't nag anyone about ETA's or progress updates.
Builds:
Test builds by @tonyp can be found in his basketbuild folder. These are for the new bootloader only! Use the tool from this thread to convert to old bootloader.
Installation:
Do a full wipe and format /system before flashing.
Flash ROM.
Flash latest KK 3.1 alpha by @pengus77 (min. alpha 15 for working wifi). It can be found in his Dev-Host folder.
Credits:
The people who have contributed to bringing KitKat to the p990.
@hjunii for his 3.1 kernel and CM 11 ROM for SU660.
@tonyp for his work on CM 11 for p990.
@DJNoXD for porting the 3.1 kernel to p990 and building android 4.4.
@pengus77 for his KK 3.1 kernel.
@Firtecy for his work on CM 11 for p990.

Changelogs
cm-11-20140120-UNOFFICIAL-p990 by @tonyp:
Ported my TheROM hardwarekeys customization options (open power menu, screen off, toggle torch, take screenshot, toggle last app).
If someone is wondering, personally I do the following changes:
double press home: power menu
long press menu button: screen off
short press search: recent apps switcher
long press search: In-app search
Added my dynamic Quickmemo support which activates when you flash the (CM10.2) Quickmemo app. Untested!
Replaced CMs performance menu with Omnis PerformanceControl.
It's been a bit more work than I hoped, but it's really nice imo (as it's fully baked into the Settings app, which I like a lot :good
This hides the zRAM preferences currently, though (so you'd have to disable it via the build.prop if for whatever reason you don't like zram).
Cheerypicked the commit which keeps the InCallUI in memory (thx @pengus77 for discovering it)
debloated and slimmed down the ROM (CM Updater etc. stuff gone). Forgot the Movie Studio which will go in the next version
Updated mini gapps to 4.4.2
Synced (mainly) to CM11 M2 (this might be related to the issues, I'll try a full nightly build once I find the time)
Pre-included BarcodeScanner (as I use it to connect to my wifi after a full wipe).
Using tegra2 optimized bionic instead of the generic one, thx to @Firtecy. No idea if this has an impact.
Removed Google Dialer and Google Keyboard. You can flash them yourself if you want them.
Edit: Oh I almost forgot, fixed some permissions (mainly bluetooth related), but I have no idea if this has any effect.
I don't have any bluetooth devices here.
Lowered overall vibration intensity.
cm-11-20131226-UNOFFICIAL-p990 by @tonyp:
switch to bcmdhd & 3.1 kernel (kk alpha 15)
fully fixed internal storage
removed the CM crap (CM Account, CMUpdater, CMFota)
synced to the newest CM11 sources
Reserved for @tonyp.

Working / not working
Valid for version: cm-11-20140120-UNOFFICIAL-p990
Working:
Phone
Messaging
WiFi
3G
Torch
Sound
SD cards
Bluetooth pairing + file transfer
GPS (got a cold fix after 30 secs with 9 satellites. Warm fix took < 10 seconds)
USB file transfer to SD card
USB tethering
Pause / resume in media explained in this post
Buggy:
Camera (image preview may be upside down)
Not working / other bugs:
WiFi tethering [log]
Bluetooth calls???
Bugs not related to ROM:
Battery level is sometimes incorrect???
Valid for version: cm-11-20131226-UNOFFICIAL-p990
Working:
Phone
Messaging
WiFi
3G
Torch
Sound
SD cards (external SD card may be broken if you dirty flash over a CM 10.2 ROM)
Bluetooth pairing + file transfer
GPS (got a cold fix after 5 mins with 11 satellites. Warm fix took < 10 seconds)
USB file transfer to SD card
USB tethering
Buggy:
Camera (image preview may be upside down and images may be green. Both stock cam and 3rd party cams are affected)
Not working / other bugs:
WiFi tethering [log]
Bluetooth calls
Pause / resume media bug explained in this post
Bugs not related to ROM:
Battery level is sometimes incorrect due to LG's bad battery driver in KK 3.1 exp 127 alpha 15 + alpha 20.
This often happens during and after charging the phone.
Valid for versions: cm-11-20131204-UNOFFICIAL-p990 and cm-11-20131206-UNOFFICIAL-p990
Working:
Phone
Messaging
WiFi
3G
Torch
USB file transfer to SD card
USB tethering
Bugged:
Bluetooth (transferring files to another android device works. Receiving files does not because of SD card bug. Bluetooth keyboard doesn't work)
Not working:
Sound (no sound at all) [log]
GPS (1 sat in view after 15 mins without using the new GPS fix)
Camera (FC when opened) [log]
SD card cannot be accessed by some apps (can be accessed with file manager though) [log]
Turning screen off results in hot reboot (letting the device turn the screen off itself works) [log]
WiFi tethering [log]
Valid for version: cm-11-20131202-UNOFFICIAL-p990
Working:
Phone
Messaging
WiFi
3G
Torch
USB tethering
Bugged:
Bluetooth (transferring files to another android device works. Receiving files does not because of SD card bug. Bluetooth keyboard not tested.)
Not working:
Sound (no sound at all) [log]
Camera (FC when opened) [log]
SD card cannot be accessed by some apps (can be accessed with file manager though)
WiFi tethering
USB file transfer to SD card
Not tested:
GPS
All logs can also be found in my Dropbox debug folder.

Fíghter02 said:
Valid for version: 11-20131204-UNOFFICIAL-p990
Working:
Phone
Messaging
WiFi
3G
Torch
USB file transfer to SD card
USB tethering
Bugged:
Bluetooth (transferring files to another android device works. Receiving files does not because of SD card bug)
Broken:
Sound (no sound at all)
GPS (1 sat in view after 15 mins without using the new GPS fix)
Camera (FC when opened)
SD card cannot be accessed by some apps (can be accessed with file manager though)
Turning screen off results in hot reboot (letting the device turn the screen off itself works)
WiFi tethering
Click to expand...
Click to collapse
An earlier test build had non oft the hot reboots wheb turning screen off. It seems to something with the surfaceFlinger, but not directly the surfaceflinger. But it is something in frameworks/native.
The first testbuild was quite stable related to hot reboots. But there are problems related to SD card, wifi, camera...
Gesendet von meinem LG-P990 mit Tapatalk

Good work fighter02
Sent from my LG-P990 using xda app-developers app

Firtecy said:
An earlier test build had non oft the hot reboots wheb turning screen off. It seems to something with the surfaceFlinger, but not directly the surfaceflinger. But it is something in frameworks/native.
The first testbuild was quite stable related to hot reboots. But there are problems related to SD card, wifi, camera...
Gesendet von meinem LG-P990 mit Tapatalk
Click to expand...
Click to collapse
I'm glad to hear that hasn't been a consistent issue. I noticed tonyp wrote some notes about the build from 02/12 being more stable with regards to the hot reboots. I haven't tested that build myself though. Thanks for the info and keep up the good work.
I just tested the latest build from 6/12 and updated the working / not working section accordingly. You will notice that I added some logs in case you guys are interested.

I try port kernel from android.googlesource.com/kernel/tegra/+/android-tegra-3.10/, anyone insterested, please give me a hand

If you get that one booting, let @pengus77 know
Sent from my Nexus 7 with Tapatalk 4

I just tested build cm-11-20131202-UNOFFICIAL-p990 and it seems quite stable as I had 0 hot reboots during the hour that I was testing. The hot reboots when turning the screen off is also gone, just like @Firtecy said earlier. The build have no gapps though. Apart from the hot reboots this build have almost the same issues as two most recent ones. Check it out in the working / not working section.

Fíghter02 said:
I just tested build cm-11-20131202-UNOFFICIAL-p990 and it seems quite stable as I had 0 hot reboots during the hour that I was testing. The hot reboots when turning the screen off is also gone, just like @Firtecy said earlier. The build have no gapps though. Apart from the hot reboots this build have almost the same issues as two most recent ones. Check it out in the working / not working section.
Click to expand...
Click to collapse
Thats right and because of that i use the libgui, libui, and libsurfaceflinger from that build if i need a stable build regards of hot reboots.
That works for nearly all new CyanogenMod builds i made.
So you can test other builds, but when you get a dark screen, just push the libs to /system/lib/ and reboot. For me it worked several times. But when cm update their sources in next time, i don't know if it still works.

Hi, hot reboot may be resolved with this change http://review.cyanogenmod.org/#/c/53162/.

[KERNEL][newbl] 3.1 Kernel (based on hjunii port)
DJNoXD release the new kernel
This is about the 3.1 kernel.
The base is hjunii kernel port. (Thank you)
More information will follow.
At the moment you can't use wlan with this kernel.
ATTACHED FILES
File Type: zip http://forum.xda-developers.com/attachment.php?attachmentid=2446316&d=1386699208
i love it :good::good::good:
---------- Post added at 12:40 AM ---------- Previous post was at 12:19 AM ----------
hennieh said:
DJNoXD release the new kernel
This is about the 3.1 kernel.
The base is hjunii kernel port. (Thank you)
More information will follow.
At the moment you can't use wlan with this kernel.
ATTACHED FILES
File Type: zip http://forum.xda-developers.com/attachment.php?attachmentid=2446316&d=1386699208
i love it :good::good::good:
Click to expand...
Click to collapse
update wifi works New Kernel tomorrow DJNoXD

hjunii said:
Hi, hot reboot may be resolved with this change http://review.cyanogenmod.org/#/c/53162/.
Click to expand...
Click to collapse
Tried it with a dirty build and no success.. I think it is only a fix for taking Screenshots and that works for me, when I take functional libs.
Gesendet von meinem ASUS Transformer Pad TF700T mit Tapatalk 4

i hope little bugs like not working mobile hotspot will be fixed

CM11 ROM for SU660 maybe help our developers.It is said that it doesn t have hot reboots and works ok.Here is a link of this rom:
http://d-h.st/hU8

I've built a new version, which should fix most of the apparent issues.
No constant hot reboots anymore and a working camera :good:
Edit: It appears only the preview works, actually taking pictures doesn't.
The external SD card doesn't get mounted properly yet, but apart from that it should be fairly stable to use (although I still wouldn't recommend it as a daily driver).
Note that this does still ship with the Kowalski Kernel. The 3.1 kernel will make a huge difference once it's fully ready.
Getting the kernel stable now should be the first priority now I think, if that turns out great the future of KitKat should be a lot brighter.
Unfortunately i'm extremely busy and will continue to be so, this is just a quick build I've been working on every now and then.
It might as well be the last one I'll be able to make until next year
Huge thanks to @hjunii, this is largely based on his SU660 build.
Download:
http://tonyp.basketbuild.com/index.php?dir=main/CM-11.0/
Edit: some more notes regarding the build:
I've enabled each and every of the low RAM configs. This does disable some of the nice animations and apparently even the transparent statusbar but in return it will result in a smoother device experience.
Some of these effects will get enabled again at a later stage, I just wanted to see which measures kitkat does offer for low end devices.
I did not yet do any customizations to the build whatsoever apart from the needed changes.
I would suggest you remove/disable/freeze the CM Updater, it's useless as we don't have official support anyways and it takes about 2mb of ram.
(but even with the included gapps we do have >120mb free ram after a reboot, Google really brought down the ram usage of their apps & framework!)
Allow me some general advice:
Pretty please do not constantly ask all those people who're working on pushing the device forward about their progress.
You might not believe it, but they will tell you if there is anything new that's worth mentioning.
I'm seeing all development threads cluttered by meaningless posts, it's insane.
Yes, I know at the 2x (and in general at xda) the development section is often misused for unimportant comments and this might not be a problem when a ROM is established and only gets minor updates.
But ask yourself if you're doing yourself a favor if you're making useless posts in the dev threads which will make it harder for the devs to find the rare useful posts somewhere between all those spam.
(This does not apply to this very thread as far as I'm concerned as it's in the general section - but ultimately it's @Fíghter02's decision as he's the OP).

Fantastic tonyp, just fantastic thanks

I had install today's version everything work perfect very fast fluid just only thing about sdcard like the first picture that sdcard report error AND I prefer to use external SD as sdcard0 and internalSD as sdcard1 so I push some script into /etc/init.d and bingo other picture.
IF someone want to try just push 99kmount file into /etc/init.d and set permission to rwxr-xr-x OR wait for tonyp add feature of switch sdcard like the previous rom has in setting.
EDIT 99kmount file content for script are
#!/system/bin/sh
mount -o rw,dirsync,nosuid,nodev,noexec,uid=1000,gid=1015,fmask=0702,dmask=0702 -t vfat /dev/block/vold/179:11 /storage/sdcard1
mount -o rw,dirsync,nosuid,nodev,noexec,uid=1000,gid=1015,fmask=0702,dmask=0702 -t vfat /dev/block/vold/179:17 /storage/sdcard0
SORRY IT seem to be trouble with camera so please do not use it just delete file if you create it SO it will be back to tonyp default.

wow,downloading now.....great dev @tonyp

Very nice
Wifi - OK
2G - OK
3G - OK
Camera - X (galery)
Whatsapp - X (download mp4)
Sms -X
But it look almost as my n5
good job
Sent from my LG-P990 using xda premium