Rom with on screen keys - Galaxy S I9000 Q&A, Help & Troubleshooting

Hey, my hardware keys are malfunctioning and I'm wondering which rom lets you disable them and enable soft keys? I know some AOKP ones do, but I'd rather someone just let me know which rom!

You don't even need to install a different ROM for that, just follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=1832638
All you need is root, a root browser and a few minutes. Good luck!

Thanks but that just enable's soft keys. I also want to disable hard keys. On my HTC one X I had a rom that did that but, not sure where it's on with the galaxy s

You could try this to disable the keys.

Related

Hard resetting ... from the from a factory ROM

If something happens to your rom where you can't boot up completely and you're on the factory ROM...do this:
To perform a hard reset
1. Press and hold the left SOFT KEY and the right SOFT KEY, and at the same time, use the stylus to press the RESET button at the middle left side of your device.
2. Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
“This operation will delete all your personal data, and reset all settings to manufacturer default.
Press Send to restore manufacturer default, or press other keys to cancel.”
3. Release the two SOFT KEYs, and then press the button on your device. Warning! Your device will be set back to factory default settings.
This was provided to me from a reliable source.
I don't have a Wing so I can't answer questions on this.
This came my way beacause my cousin overclocked his Wing too much and it would not boot.
The T-Mo ROM is not available for download to re-install it.
Because of where he works, he was able to come across this info.
I just shared it with you.
Thx for the info, but the manual states this as well
xsign said:
Thx for the info, but the manual states this as well
Click to expand...
Click to collapse
Don't own or have the device, just shared what was told to me as a fix for my cousin.
Thanks - but i worte in another thread that i really hope for one thing:
Pleas - to all noobs - don´t flash ROMs or change poolsize - when you don´t know how to make a hardreset or to start your device in bootloader.
Please read, read, read - and then beginn playing when you know what you are doing.
Thanks

Can someone please help me using roms???

I recently got myself an X1, and I have to honestly say, its brill!
I am mainly using the spb shell panel, and like it for the reason that I can use my thick fingers to operate it. Is their any other user interfaces like this one?
Ok, I am a smart enough guy…(sometimes)…but I cannot for the life of me understand roms…and what you guys are going on about in these forums.
What I am looking for is a good selection of panels to choose from, however from what I can get from these forums is that I am better installing something completely different on the phone.. I assume this gets rid of my panels?
Do roms completely overwrite what is currenly on the phone? Ie. Panels, tomtom, etc.
Any tips would be much appreciated, as I am interested in a user interface that I can better customise to suit myself (cant customise spb mobile shell)…..
Thanks..
Roughly said a ROM is a collection of appz put in one file together with the WinMo OS.
What those appz are, and which version of winmo, totally depends on the creator of the custom cooked ROM. In the threads of the custom ROM is always a summary of what is included.
Most chefs delete the panels from their ROMs, except for the standard panels and the panelmanager. So you can install the panels you want to use.
When installing a new ROM (custom cooked or stock) it always deletes the phone memory, not your SD-card! So you need to install appz, change settings to your own need, and ofcourse put contacts, agenda, etc back from back-up.
Nice, thanks.
I think in that case that I will avoid them for now, as I do not have a good enough understanding of how it works. I will how ever make more of an effort to read into the process to understand how it will benefit how I use the phone.
Thanks for the heads up.
May I suggest you to read this thread:
(sticky thred, on top of the forum)
http://forum.xda-developers.com/showthread.php?t=477801
You'll find what you want to know
Ah, perfect. Thanks for the link!
Nice resource btw.
Goodluck...Enjoy Reading...
Ok, took the plunge, and installed a custom rom....
I installed Touch_IT v4.5 and it is excellent..however
Anyone else experiencing lots of crashes? I am getting lots of crashes for stupid things like trying to open the X panel....
Whats annoyed me most is that I have taken off the back cover so much to remove the battery (to restart) I have cracked the part under the camera :-(
Just out of interest...to convert back to the stock o2 UK rom do I simply download "X1i_GENERIC_UK_CDF1215-1832_R2AA010 - uploaded" from:
NEW ORIGINAL X1 ROMS (all released variants) update 14.3.2009
Then Hard SPL, and install this original rom?
Thanks..
djglenn1337 said:
Ok, took the plunge, and installed a custom rom....
I installed Touch_IT v4.5 and it is excellent..however
Anyone else experiencing lots of crashes? I am getting lots of crashes for stupid things like trying to open the X panel....
Whats annoyed me most is that I have taken off the back cover so much to remove the battery (to restart) I have cracked the part under the camera :-(
Just out of interest...to convert back to the stock o2 UK rom do I simply download "X1i_GENERIC_UK_CDF1215-1832_R2AA010 - uploaded" from:
NEW ORIGINAL X1 ROMS (all released variants) update 14.3.2009
Then Hard SPL, and install this original rom?
Thanks..
Click to expand...
Click to collapse
Yes, and yes.
Edit: You don't need to HARD SPL again before you flash it.
I believe that ROM is the generic SE one without any of the O2 branding.
If you need to return it for any reason you will need to reflash it with the O2 ROM (which I believe is available in the same thread as you found the one you pointed out).
You'll also need to change the hard spl back to the original.
Shame about the crack under the camera, did you know you can soft reset by holding down the power button for 3-5 seconds?
insom81 said:
You'll also need to change the hard spl back to the original.
Shame about the crack under the camera, did you know you can soft reset by holding down the power button for 3-5 seconds?
Click to expand...
Click to collapse
Thanks for the help.
How do I change the hard spl back to the original??
I do assume though there is no way to reset the phone when it has completely crashed, without removing the battery. Holding the power button down has no effect.
Its a shame as I love the touch-it 4.5 rom. I almost would live with it being unstable just for some of the features (i.e Camera with autoflash, and the touchflo 3D interface).
djglenn1337 said:
How do I change the hard spl back to the original??
Click to expand...
Click to collapse
In the Hard-SPL thread you can read how to change back to original spl.
djglenn1337 said:
Its a shame as I love the touch-it 4.5 rom. I almost would live with it being unstable just for some of the features (i.e Camera with autoflash, and the touchflo 3D interface).
Click to expand...
Click to collapse
Did you hard reset after flash, because I've been using Touch-IT 4.5 since the day after it was released and aren't experiencing big stability issues (hard reset is press the two directly under your screen and press reset button with stylo).
djglenn1337 said:
I do assume though there is no way to reset the phone when it has completely crashed, without removing the battery. Holding the power button down has no effect.
Click to expand...
Click to collapse
When the batterycover is removed there is a tiny hole next to the battery, you can use your stylo to press the reset button inside the hole (soft reset).
hard reset after flash? no...how do I do that?
As I didnt do it, will I have to reflash it again and then hard reset?
I dont understand "press the 2 under the screen" sorry...
Thanks again..
Hey guys I just too got an X1a and want to install this ROM: http://forum.xda-developers.com/showthread.php?t=485624 But still not really quite sure what to do. So I just download the ROM and ROMUpdateUtility.exe yes? (where can i find the rom update utility for the Xperia?) Then I just install it onto the phone? I know I hav to backup etc. Will this void the warranty though, will I be able to get it to factory settings if I want to change it back?
Thank you.
Need a reply asap..
Oh and is the Touch-IT good?
djglenn1337 said:
hard reset after flash? no...how do I do that?
As I didnt do it, will I have to reflash it again and then hard reset?
I dont understand "press the 2 under the screen" sorry...
Thanks again..
Click to expand...
Click to collapse
Hard reset:
1. turn off the phone
2. Hold both right and left buttons (the ones right under the screen, dont know the name)
3. press reset button with stylus, while still holding the others
tai927 said:
Hey guys I just too got an X1a and want to install this ROM: http://forum.xda-developers.com/showthread.php?t=485624 But still not really quite sure what to do. So I just download the ROM and ROMUpdateUtility.exe yes? (where can i find the rom update utility for the Xperia?) Then I just install it onto the phone? I know I hav to backup etc. Will this void the warranty though, will I be able to get it to factory settings if I want to change it back?
Thank you.
Need a reply asap..
Click to expand...
Click to collapse
Please read the sticky's in the ROM thread before trying to flash....
How to flash?
http://forum.xda-developers.com/showthread.php?t=446070
Hard-SPL
http://forum.xda-developers.com/showthread.php?t=431218
How to back-up your ROM.
http://forum.xda-developers.com/showthread.php?t=462926
Have fun reading....
Lokatho said:
Hard reset:
1. turn off the phone
2. Hold both right and left buttons (the ones right under the screen, dont know the name)
3. press reset button with stylus, while still holding the others
Click to expand...
Click to collapse
Ok, so the reset button is the one underneath the battery cover?
and the right and left buttons are the silver rectangular ones that you can assign as anything?
Should I reflash the phone and hard reset it then, or might hard resetting it now work?
djglenn1337 said:
Ok, so the reset button is the one underneath the battery cover?
and the right and left buttons are the silver rectangular ones that you can assign as anything?
Should I reflash the phone and hard reset it then, or might hard resetting it now work?
Click to expand...
Click to collapse
Hard reset without reflash should do the trick
ps remind that hard reset will set the OS back like it has never been used before
Curious on how revert the hardspl to original.
I'm new to all this as well,
I want to make registry edits, i downloaded the free trial Resco file explorer, which is supposed to be able to make reg edits, but i CANNOT (or simply i just dont konw how or where) find the HKCU folder. I can only see the regular Device folders, thats about it!! Where am i supposed to look at??
chris28j said:
Curious on how revert the hardspl to original.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=431218
chris28j said:
I want to make registry edits, i downloaded the free trial Resco file explorer, which is supposed to be able to make reg edits, but i CANNOT (or simply i just dont konw how or where) find the HKCU folder. I can only see the regular Device folders, thats about it!! Where am i supposed to look at??
Click to expand...
Click to collapse
Don't know Resco first handed, but looking at the screenshots (http://www.resco.net/pocketpc/explorer/indepth.asp) you should be able to enter the registry at the base of the folder tree.

Broken Hardware Volume Buttons! Can't Flash

Hi All,
Maybe someone can help me? My blackstone is quite old now but probably still in warranty. I have a Dutty Rom on it and would like to reflash back to a stock rom so I can take it for servicing under warranty but the down volume button doesn't work. I can't enter the flash mode.
Anyone know a way I can do this without the voulme button or maybe trigger the volume button another way. I tried using foil on it but that doesn't work.
thanks
themaestro said:
Hi All,
Maybe someone can help me? My blackstone is quite old now but probably still in warranty. I have a Dutty Rom on it and would like to reflash back to a stock rom so I can take it for servicing under warranty but the down volume button doesn't work. I can't enter the flash mode.
Anyone know a way I can do this without the voulme button or maybe trigger the volume button another way. I tried using foil on it but that doesn't work.
thanks
Click to expand...
Click to collapse
If you leave your phone in the normal position ie normal boot up with manila loaded and then run the RUUWrapper, there is a little sub-routine included which automatically changes to bootloader mode (I never put the phone into bootloader before a flash). Luckily your volume up still appears to work so at least you can do the hard resets.
themaestro said:
Hi All,
Maybe someone can help me? My blackstone is quite old now but probably still in warranty. I have a Dutty Rom on it and would like to reflash back to a stock rom so I can take it for servicing under warranty but the down volume button doesn't work. I can't enter the flash mode.
Anyone know a way I can do this without the voulme button or maybe trigger the volume button another way. I tried using foil on it but that doesn't work.
thanks
Click to expand...
Click to collapse
The blackstone has very very poor volume buttons, amazingly bad!!! Now the plastic volume buttons are totally broken. (after 10 months) But I can use the buttons correctly.
Poor material, poor HTC quality. Never HTC again.
make sure you get it to the stock SPL too because hardspl voids your warranty if they find it.
like clyde said, if you connect your blackstone to your computer via activesync, you can run the ROM update from your computer, without you having to manually put the phone into bootloader mode. not sure how youre gonna do a hard reset though (not sure if its necessary) as you need both volume keys to do that
good luck
ASK768 said:
make sure you get it to the stock SPL too because hardspl voids your warranty if they find it.
like clyde said, if you connect your blackstone to your computer via activesync, you can run the ROM update from your computer, without you having to manually put the phone into bootloader mode. not sure how youre gonna do a hard reset though (not sure if its necessary) as you need both volume keys to do that
good luck
Click to expand...
Click to collapse
True, I forgot you need both to do the hard reset, you can see I do this as second nature now without thinking.
Oh well, you'll have to live without the hard reset after the flash. There are many who say it's not necessary, although I religiously still do my hard reset after each flash.
There's an option to wipe the device in the System settings. I think this is equivalent to a Hard Reset.
It is. _
ClydeB1 said:
True, I forgot you need both to do the hard reset, you can see I do this as second nature now without thinking.
Oh well, you'll have to live without the hard reset after the flash. There are many who say it's not necessary, although I religiously still do my hard reset after each flash.
Click to expand...
Click to collapse
You can hard reset by clearing storage under system settings -does the same thing.
mine also broken after 3 months of use! very POOORRRR material! maybe No HTC again...
ClydeB1 said:
True, I forgot you need both to do the hard reset, you can see I do this as second nature now without thinking.
Oh well, you'll have to live without the hard reset after the flash. There are many who say it's not necessary, although I religiously still do my hard reset after each flash.
Click to expand...
Click to collapse
I never did a HR after flash, eventually I do a clear storage after some time, probably b4 loading all the apps, but will do a HR b4 flash.
Shiv
Thanks All
For your replies. Much appreciated.

Flash SPL with no touch functionality

Dear Community
My display is broken in a way, that I can see everything, but cannot react with the device using the touch screen. Only the physical buttons work. Therefore I want to use my warranty. The only problem is that I flashed an olinex spl. I have a stock spl and everything works well, right to the point where I have to confirm to install the software (bootloader.exe) to flash. I have some other software to operate the diamond from the PC but there I have to confirm to when I install it, which doesn't help at all.
Does anyone know a way to use key combinations or a way around it.
Thank you very much.

Alt Key Keyboard Issue

Well - I really like everything about the new ROM - installed it on my T-Mob US phone and everything is great. Except... the alt-key doesn't work.. meaning, I can't use important keys such as '?', '@'... etc. I have to open the onscreen keyboard to get them.
Any idea what I might have done wrong?
What ROM have you installed?
Please search and then post in the relevant thread instead of creating a new one.
Ta
Dave

Categories

Resources