I was previously on Gingerbread 2.3 with CF-Root kernel. I flashed Ultimate XXLSC JB ROM v5.1 from here This ROM flashed fine from CWM as far as I know. It had a few issues since i forgot to wipe the data. I rebooted into recovery to do that. After which i lost root (im not sure if i had it before wiping the data though). The su binary was corrupted in some way (ES File explorer could not get its properties) and SuperSU said 'Installation failed'. I tried installing a simple rooting zip from CWM. This got stuck at 'Unmounting system' and did no effect to the su and busybox binaries. CWM was also causing problems. It refused to boot into system normally and could not unmount /system. I could not make a backup of this system since it would crash on backing up 'busybox'. I could not reflash the zip as it would not go further than the intial text logo. Here is the normal boot into recovery log:
Starting recovery on Sat Jan 26 17:22:13 2013
framebuffer: fd 4 (800 x 1280)
E:unknown volume for path [/system]
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/mmcblk0p5 (null) 0
2 /recovery emmc /dev/block/mmcblk0p6 (null) 0
3 /efs ext4 /dev/block/mmcblk0p1 (null) 0
4 /cache ext4 /dev/block/mmcblk0p7 (null) 0
5 /system ext4 /dev/block/mmcblk0p9 (null) 0
6 /data ext4 /dev/block/mmcblk0p10 (null) 0
7 /preload ext4 /dev/block/mmcblk0p12 (null) 0
8 /modem emmc /dev/block/mmcblk0p8 (null) 0
9 /emmc vfat /dev/block/mmcblk0p11 (null) 0
10 /sdcard vfat /dev/block/mmcblk1p1 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
I:device_recovery_start()
PhilZ Touch 3
CWM Base version: 6.0.1.9
Command: "recovery"
ro.sec_debug.enable=0
ro.serialno=
ro.bootmode=unknown
ro.baseband=unknown
ro.bootloader=unknown
ro.debug_level=unknown
ro.emmc_checksum=unknown
ril.dualmode.change=unknown
ro.hardware=smdk4210
ro.revision=8
ro.factorytest=0
ro.uart_debug=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=mtp
init.svc.ueventd=running
ro.crypto.keyfile.userdata=/efs/metadata
init.svc.recovery=running
adb.recovery=1
init.svc.adbd=running
service.adb.root=1
I:Checking for extendedcommand & OpenRecoveryScript...
I:Skipping execution of extendedcommand, file not found...
I:Skipping execution of OpenRecoveryScript, file not found...
IS THE RED PART THE ISSUE? HOW DO I FIX THIS? CAN I GO BACK TO A CWM BACKUP OF MY OLD GB SYSTEM SAFELY? The OS functions fine for now though.
You forgot to wipe when installing the JB CR. So the beginning gave you an unstable system.
And that's why you should install a fresh stock Rom with Odin.
After everything is working you might restore your GB backup (using a safe kernel like Philz 3.99).
I have to admit that I have difficulties to follow your steps.
Related
well I have this problem :S
please any help?
Recovery Log
Starting recovery on Tue Sep 25 06:01:29 2012
framebuffer: fd 4 (320 x 480)
CWM-based Recovery v5.0.2.8
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null)
1 /cache yaffs2 cache (null)
2 /data yaffs2 userdata (null)
3 /system yaffs2 system (null)
4 /sdcard vfat /dev/block/mmcblk0p1 (null)
5 /sd-ext ext4 /dev/block/mmcblk0p2 (null)
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
-- Installing: /sdcard/XPERIENCE-Tweaks.zip
Finding update package...
I:Update location: /sdcard/XPERIENCE-Tweaks.zip
Opening update package...
minzip: Filename contains invalid character '342'
minzip: Invalid filename (at 16)
E:Can't open /sdcard/XPERIENCE-Tweaks.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
Please any help?
Well i'm fin the problem please close thread
Hi!
a few questions about the Parts of the I8190.
# Mount point fs device
/system ext4 /dev/block/mmcblk0p22
/cache ext4 /dev/block/mmcblk0p23
/data ext4 /dev/block/mmcblk0p25
/efs ext4 /dev/block/mmcblk0p11
/sdcard datamedia /dev/null
/external_sd vfat /dev/block/mmcblk1 /dev/block/mmcblk1p1
/boot emmc /dev/block/mmcblk0p20
/recovery emmc /dev/block/mmcblk0p21
/preload ext4 /dev/block/mmcblk0p24
Where ist the MODEM points?????
And
In Stock ROM is included:
STE_boot1.img
STE_boot2.img
what is this??
Darkman said:
Hi!
a few questions about the Parts of the I8190.
# Mount point fs device
/system ext4 /dev/block/mmcblk0p22
/cache ext4 /dev/block/mmcblk0p23
/data ext4 /dev/block/mmcblk0p25
/efs ext4 /dev/block/mmcblk0p11
/sdcard datamedia /dev/null
/external_sd vfat /dev/block/mmcblk1 /dev/block/mmcblk1p1
/boot emmc /dev/block/mmcblk0p20
/recovery emmc /dev/block/mmcblk0p21
/preload ext4 /dev/block/mmcblk0p24
Where ist the MODEM points?????
And
In Stock ROM is included:
STE_boot1.img
STE_boot2.img
what is this??
Click to expand...
Click to collapse
Hi Darkman
In this post HERE I have a Mobileodin.txt made by MobileOdin whit some data very interesting about S3 Mini partitions.
We see on it the modem is on partition 12.
ValenteL
What are the correct commands for the updater script in a custom rom.zip when im writing to the /system, /data, /recovery, /boot i know the architecture which is.... but what would i put in the updater script from a custom rom....i built one but all thats in the there for mount is MTD
/recovery emmc /dev/block/platform/sdhci-tegra.3/by-name/SOS
/boot emmc /dev/block/platform/sdhci-tegra.3/by-name/LNX
/system ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
/cache ext4 /dev/block/platform/sdhci-tegra.3/by-name/CAC
/misc emmc /dev/block/platform/sdhci-tegra.3/by-name/MSC
/staging emmc /dev/block/platform/sdhci-tegra.3/by-name/USP
/metadata emmc /dev/block/platform/sdhci-tegra.3/by-name/MDA
/data ext4 /dev/block/platform/sdhci-tegra.3/by-name/UDA
*please move to general questions sorry devs
No4g4Me said:
What are the correct commands for the updater script in a custom rom.zip when im writing to the /system, /data, /recovery, /boot
Click to expand...
Click to collapse
the partition type is EMMC
Recovery is mmcblk0p1
Boot is mmcblk0p2
System is mmcblk0p3
http://forum.xda-developers.com/showpost.php?p=41808197&postcount=13
Sweet more roms!
Edit:
Here is what I am using, but the format isnt working, I'm getting status 6 in cwm, So just removing that from updater script and doing a manual wipe of system before flash;
format("ext4", "EMMC", "/dev/block/mmcblk0p3");
mount("ext4", "EMMC", "/dev/block/mmcblk0p3", "/system");
This is what I'm using because I pulled it straight from the OTA update updater-script file:
format("ext4", "EMMC", "/dev/block/platform/sdhci-tegra.3/by-name/APP", "0", "/system");
mount("ext4", "EMMC", "/dev/block/platform/sdhci-tegra.3/by-name/APP", "/system");
Yeah. I got status 6 when I tried using those commands as well. I'm not sure if it's something misconfigured with the CWM recovery or not.
Anyway, I was able to mount and unmount stuff with:
Code:
run_program("/sbin/mount","/system");
Code:
run_program("/sbin/umount","/system");
The partitions in the fstab are:
/recovery emmc /dev/block/platform/sdhci-tegra.3/by-name/SOS
/boot emmc /dev/block/platform/sdhci-tegra.3/by-name/LNX
/system ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
/cache ext4 /dev/block/platform/sdhci-tegra.3/by-name/CAC
/misc emmc /dev/block/platform/sdhci-tegra.3/by-name/MSC
/staging emmc /dev/block/platform/sdhci-tegra.3/by-name/USP
/metadata emmc /dev/block/platform/sdhci-tegra.3/by-name/MDA
/data ext4 /dev/block/platform/sdhci-tegra.3/by-name/UDA
/sdcard datamedia /dev/null
Click to expand...
Click to collapse
And as the professor pointed out, the corresponding mmcblk numbers are
lrwxrwxrwx root root 2013-05-25 02:23 APP -> /dev/block/mmcblk0p3
lrwxrwxrwx root root 2013-05-25 02:23 CAC -> /dev/block/mmcblk0p4
lrwxrwxrwx root root 2013-05-25 02:23 LNX -> /dev/block/mmcblk0p2
lrwxrwxrwx root root 2013-05-25 02:23 MDA -> /dev/block/mmcblk0p8
lrwxrwxrwx root root 2013-05-25 02:23 MSC -> /dev/block/mmcblk0p6
lrwxrwxrwx root root 2013-05-25 02:23 SOS -> /dev/block/mmcblk0p1
lrwxrwxrwx root root 2013-05-25 02:23 UDA -> /dev/block/mmcblk0p9
lrwxrwxrwx root root 2013-05-25 02:23 UPP -> /dev/block/mmcblk0p5
lrwxrwxrwx root root 2013-05-25 02:23 USP -> /dev/block/mmcblk0p7
Click to expand...
Click to collapse
Ok, that's how I had to mount them on the Droid Bionic as well.
Hi,
i'm a new user and I can't add post to correct thread so I try to begin a new thread here.
I installed cwm 6.0.4.7-jena on my phone and all install process is been completed correctly but on reboot from cwn shell / menu I can't mount sdcard0.
This error from recovery.log file:
Code:
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
I:Volume /storage/sdcard0 is not idle, current state is 2
Error mounting /storage/sdcard0!
File recovery.fstab it seems correct:
Code:
# cat /etc//recovery.fstab
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/dev/block/mmcblk0p8 /boot emmc defaults defaults
/dev/block/mmcblk0p12 /recovery emmc defaults defaults
/dev/block/mmcblk0p16 /system ext4 ro,barrier=1 wait
/dev/block/mmcblk0p18 /data ext4 nosuid,nodev,noauto_da_alloc,barrier=1 wait,check,encryptable=footer,length=-16384
/dev/block/mmcblk0p17 /cache ext4 nosuid,nodev,barrier=1 wait,check
# vold managed volumes
/devices/platform/msm_sdcc.3/mmc_host auto vfat defaults voldmanaged=sdcard0:23,noemulatedsd,nonremovable
/devices/platform/msm_sdcc.1/mmc_host auto auto defaults voldmanaged=sdcard1:auto,noemulatedsd
/devices/platform/msm_hsusb_host.0 auto auto defaults voldmanaged=usbdisk:auto
# zRam (zramsize = 64 megabytes)
/dev/block/zram0 none swap defaults zramsize=67108864
If I use last OmniROM I see that sdcard0 is not usable and this confirm like for cwn that cwn-6.0.4.7 that there is a problem with sdcard0 (internal)
But If I use last cm-10.1 sdcard0 is correctly usable sdcard yet if on cwn it isn't possible mount it.
So probably is there a bug on cwm-6.0.4.7 and omni-4.4.2-20140202-jenad-HOMEMADE.
Could be relative to a wrong partition data ? I try to format it from cwm but I receive error and I can't donwgrade to previous cwm-6.0.3.2 (that it works with sdcard0) because there is a check on status of the sdcard0.
Any suggestions ?
Thanks in advance
Hello, I have a samsung galxy s plus with cm11 and a broken screen and i want to recover data from internal storage
when the phone is on i cannot access adb
in recovery i can use adb shell but don't know how to mount the internal storage.
I've tried several ways to mount but didn't work
here is my fstab
Code:
/dev/block/mmcblk0p16 /cache ext4 rw
/dev/block/mmcblk0p17 /data ext4 rw
/dev/block/mmcblk0p15 /system ext4 rw
and recovery.fstab
Code:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/dev/block/mmcblk0p8 /boot emmc defaults recoveryonly
/dev/block/mmcblk0p13 /recovery emmc defaults recoveryonly
/dev/block/mmcblk0p15 /system ext4 ro,errors=panic wait
/dev/block/mmcblk0p16 /cache ext4 nosuid,nodev,barrier=1 wait,check
/dev/block/mmcblk0p17 /data ext4 nosuid,nodev,noatime,noauto_da_alloc,journal_async_commit,errors=panic wait,check,encryptable=footer,length=-16384
/devices/platform/msm_sdcc.2/mmc_host/mmc1 /storage/sdcard0 vfat defaults voldmanaged=sdcard0:28,nonremovable
/devices/platform/msm_sdcc.4/mmc_host/mmc2 /storage/sdcard1 vfat defaults voldmanaged=sdcard1:auto
/devices/platform/msm_hsusb_host.0 /storage/usbdisk auto defaults voldmanaged=usbdisk:auto
can anyone help?
Google Android commander. Turn your phone on and use that to get all your files.
Sent from my SM-N900T using Tapatalk
the problem is i've modified build.prop to try to enable MTP instead of UMS but now i have boot loop (it vibrates) and even after pushing the backup of build.prop on the phone, the phone still doesn't boot. I can only use the recovery.
anyone?, Im sure there is a way but I just can't find one