Related
I just flashed a battery mod on my galaxy s.
But i think i downloaded the Wrong one!!! When i did a reboot, the process 'android.phone' stopped working. Mmmm.. OK.
Tried a factory reset through the 3 button menu. Well now it does not do anything, i can see the boot movie, but then i get a Black screen with an heartbeat on the vibration thingy.
I did not panic and tried to flash an other firmware. Well it did not work. I see the boot movie, but then the screen blacks out and nothing works......
I searched for this, but i didnt get a good answer on how to solve this.
So if anyone is kind enough to help me, and tell me what to do in simple steps.
The same here. I used version D for JP6 & the 2nd method.
I had to reflash the softwear.
Exact same problem with me, had to reflash. Could someone tell the guy who has the battery mod thread?
Sent from my GT-I9000 using XDA App
Antonyjeweet said:
I just flashed a battery mod on my galaxy s.
But i think i downloaded the Wrong one!!! When i did a reboot, the process 'android.phone' stopped working. Mmmm.. OK.
Tried a factory reset through the 3 button menu. Well now it does not do anything, i can see the boot movie, but then i get a Black screen with an heartbeat on the vibration thingy.
I did not panic and tried to flash an other firmware. Well it did not work. I see the boot movie, but then the screen blacks out and nothing works......
I searched for this, but i didnt get a good answer on how to solve this.
So if anyone is kind enough to help me, and tell me what to do in simple steps.
Click to expand...
Click to collapse
1st. You need to flash a fresh firmware I suggest a official one so you can download the latest JP6 from kies without knifing the registry. you can get those firmwares from http://www.samfirmware.com/WEBPROTECT-i9000.htm but you need to register first. And here are the intructions how to flash http://samsunggalaxysforums.com/sho...and-and-flash-newer-firmware-to-your-Galaxy-S
2nd. After a succesfull flash go to recoverymode (shut down device, hold: vol-up, home and power)
wipe cache and do a factory reset just incase, and boot your device.
3rd. Install JP6 through Kies
edit:
BTW im a noob who did just this after i messed my phone to a state like mentioned in op So i dont take any responsibility about any damage you do to your phone. I did something like this and now i have official JP6 inside my sgs and its flying
Hi guys
I'm pretty much a newbie when it comes to flashing a rom such as ICS or any latest rom that is available for my Galaxy Tab so i really need help with this to avoid problems. First how do i know whether my galaxy tab is GSM or CMDA ? i checked my WIFI settings and it says GSM/WCMDA what does these means ? I can use 3G if you needed to know.
And what tools and applications do i need ? to flash a rom such as ICS or any latest stable rom. i just factory reset my Galaxy Tab GT P1000 already as it's causing problems for me such as freezing everyday and restart by itself.
Currently my Galaxy Tab is on 2.3.3 GingerBread Android. The stock version of it was Froyo i guess that is 2.2 right ? and yeah i updated my tab from Kies few months ago to gingerbread of course. And yes i already rooted my Galaxy Tab few months ago but i just factory reset it today i guess the root is gone now ?
What are the latest and stable ICS/JB version for my Galaxy Tab GT P1000 ? please do guide me to successfully installing them.
hope someone is able to help me with this as i am going to flash it today.
thank you very much
Edit is highlighted by blue font. Mistake highlighted by red font.
I was just about to write a guide for my niece, here goes: -
Please read other guides to be more understanding of flashing. Below is a quick step only. Just in case the good long guides are too long and too complex. Hopefully with a short guide + long guide, it's easier and cover both sides / requirements. Sorry that it was too short for dc2mx, hope he recovers well.
pre-requisite. --->>> magic action.
Hold power button 8 seconds and it will FULLY SHUTDOWN. Don't let it be ON whole night. Battery does not charge during DOWNLOAD mode and not charge in RECOVERY mode. That's why I write in step 16 about this magic 8 seconds fully shutdown.
Hold power button 4 seconds and it boots up.
Hold power button 12 seconds will shutdown then boots. Not adviced. Because it becomes boot-loop.
OK, may some filenames are wrong, but they carry the same meaning. Hence please forgive my short-coming or spelling mistake or naming error.
make sure battery is 100% charged up.
no need root, hence skip rooting step.
download this file >>>GB-Stock-Safe-v5<<< link is provided another time by http://forum.xda-developers.com/showthread.php?t=1881981 - thanks thanks thanks to priyana priyana priyana.
make sure to install USB driver first, then plug in TAB to PC, wait few minutes to let it recognize, install and stable_lise <<<stabilize>>>. Takes time. No need to copy anything into it. This is just to ensure that the drivers were installed properly and that it successfully recognized the device so that FLASHING can be carried out.
reboot holding VOL_DOWN to go into DOWNLOAD MODE. You should see the word DOWNLOAD with a big triangle symbol.
direct use Odin software to flash the >>>GB-Stock-Safe-v5<<< OVERCOME RE-STOCK version 5 (the file is TAR format), download link above. See more details somewhere else. Sorry for being lazy uncle.
make sure to select a file named <<<<mr.pit>>>> for the pit section, MUST.
select the <<<<rom file.TAR>>>> format for PDA <<<I wrote WRONG previously into phone section|>>>, MUST. Very terribly sorry to dc2mx and anyone else affected.
select <<<<modem.bin>>>> for phone section else can't call, but not need now, later will have, can skip. Unless you wanna stick to 2.3.3
tick 3 items, A = re-partition, B = auto-reboot, C = F.reset.time. MUST.
click FLASH, wait 2.5 minutes, finished, auto reboot. You should see the USB connect YELLOW highlight successful before able to click FLASH.
then reboot again into Download mode and Odin again to flash the KERNEL only <<<002001-Overcome_Kernel_v4.0.0.tar>>> because it contains most importantly CWM (clock work mod), which is a TAB_self_rom_flashing. (newbie term).
Then download a CM9 or CM10 or whatever you want. as for me, as of writing I'm using alroger's 8th November version. Thanks to alroger, humeros, cdesai, and so many more.....http://forum.xda-developers.com/showthread.php?t=1869477 Put into TAB's internal sdcard. Fastest flash. My external SD is cheap type, hence slow.
Flash it via reboot holding VOL_UP to go into RECOVERY mode. Select the file/rom that you chosen.
You'll see flash progress go to 10% then reboot.
Then reboot loop non stop. Hold power button for 8 seconds for it to shutdown fully.
Why? because flashing the first 10% puts in a new kernel with new MTD partition and everything behinds it can't recognize it, can't find it hence boot loop.
Enter RECOVERY again, reboot holding VOL_UP. If failed again. Don't worry, keep trying, I had to try 10 times. My first manual reboot went into CWM successfully but I didn't understand and realize, hence did not flash the file again. Then reboot normally, obviously it just boot-loops. Tried to go into CWM the 3rd time but not succesful, it just boot-loops. try so many times, with full shutdown and wait many minutes in between. I think around 10 times or more later went into CWM finally. God bless.
Reboot again into RECOVERY and flash one more time and WIN, DONE.
finished.
cx5 said:
I was just about to write a guide for my niece, here goes: -
make sure battery is 100% charged up.
no need root, hence skip rooting step.
download this file >>>GB-Stock-Safe-v5<<< link is provided another time by http://forum.xda-developers.com/showthread.php?t=1881981 - thanks thanks thanks
make sure to install USB driver first, then plug in TAB to PC, wait few minutes to let it recognize, install and stable_lise. Takes time.
reboot holding VOL_DOWN to go into DOWNLOAD MODE.
direct use Odin to flash the OVERCOME RE-STOCK version 5, download link above. See more details somewhere else. Sorry for being lazy uncle.
make sure to select mr.pit for the pit section, MUST.
select the rom file.TAR for phone section, MUST.
select modem.bin for phone else can't call, but not need now, later will have, can skip. Unless you wanna stick to 2.3.3
tick 3 items, A = re-partition, B = auto-reboot, C = F.reset.time. MUST.
click FLASH, wait 2.5 minutes, finished, auto reboot.
then Odin again to flash the KERNEL only <<<002001-Overcome_Kernel_v4.0.0.tar>>> because it contains most importantly CWM (clock work mod), which is a TAB_self_rom_flashing. (newbie term).
Then download a CM9 or CM10 or whatever you want, for me, as of writing I'm using alroger's 8th November version. http://forum.xda-developers.com/showthread.php?t=1869477 Put into TAB's internal sdcard. Fastest flash.
Flash it via reboot holding VOL_UP to go into RECOVERY mode. Select the file/rom that you chosen.
You'll see flash progress go to 10% then reboot.
Then reboot loop non stop. Hold power button for 8 seconds for it to shutdown.
Why? because flashing the first 10% puts in a new kernel with new MTD partition and everything behinds it can't recognize it, can't find it hence boot loop.
Enter RECOVERY again, reboot holding VOL_UP. If failed again. Don't worry, keep trying, I had to try 10 times.
Reboot again into RECOVERY and flash one more time and WIN, DONE.
finished.
Click to expand...
Click to collapse
Hi thank you for providing with this guide but it doesn't answer any of my questions i am asking but anyway, i am confused with step 4 i have already downloaded GB Stock Safe V5 from the thread you linked. what do you mean by install and Stable_lise ? i have my USB Cable connected to my Galaxy Tab and it shows as Removable storage. What do i need to copy in it ?
If it's possible can you provide much more detailed and clearer instructions ? which are definitely newbie proof.
EDIT: Nevermind i got what you're talking about but i did those 11 steps then now Odin says FAIL on the application about something unable to write partion or something like that. now my Tab is frozen on Do not turn off target screen, Did my Tab just got bricked ? how do i restart it ?
cx5 said:
I was just about to write a guide for my niece, here goes: -
make sure battery is 100% charged up.
no need root, hence skip rooting step.
download this file >>>GB-Stock-Safe-v5<<< link is provided another time by http://forum.xda-developers.com/showthread.php?t=1881981 - thanks thanks thanks
make sure to install USB driver first, then plug in TAB to PC, wait few minutes to let it recognize, install and stable_lise. Takes time.
reboot holding VOL_DOWN to go into DOWNLOAD MODE.
direct use Odin to flash the OVERCOME RE-STOCK version 5, download link above. See more details somewhere else. Sorry for being lazy uncle.
make sure to select mr.pit for the pit section, MUST.
select the rom file.TAR for phone section, MUST.
select modem.bin for phone else can't call, but not need now, later will have, can skip. Unless you wanna stick to 2.3.3
tick 3 items, A = re-partition, B = auto-reboot, C = F.reset.time. MUST.
click FLASH, wait 2.5 minutes, finished, auto reboot.
then Odin again to flash the KERNEL only <<<002001-Overcome_Kernel_v4.0.0.tar>>> because it contains most importantly CWM (clock work mod), which is a TAB_self_rom_flashing. (newbie term).
Then download a CM9 or CM10 or whatever you want, for me, as of writing I'm using alroger's 8th November version. http://forum.xda-developers.com/showthread.php?t=1869477 Put into TAB's internal sdcard. Fastest flash.
Flash it via reboot holding VOL_UP to go into RECOVERY mode. Select the file/rom that you chosen.
You'll see flash progress go to 10% then reboot.
Then reboot loop non stop. Hold power button for 8 seconds for it to shutdown.
Why? because flashing the first 10% puts in a new kernel with new MTD partition and everything behinds it can't recognize it, can't find it hence boot loop.
Enter RECOVERY again, reboot holding VOL_UP. If failed again. Don't worry, keep trying, I had to try 10 times.
Reboot again into RECOVERY and flash one more time and WIN, DONE.
finished.
Click to expand...
Click to collapse
thanks for this, it helps alot
can you provide links to the files?
I see there is a link for the >>>GB-Stock-Safe-v5<<< but I don't see links for
OVERCOME RE-STOCK version 5, the kernel is there but no OVERCOME RE-STOCK version 5..
thank you again
oh, and I suppose that "stable_lise" refers to stabilize?
See my signature for overcome new links.
(Actually same as his link)
It is GB stock safe v5, should no be called Overcome version 5.
Sent from my GT-P1000 using xda app-developers app
thanks priyana!!
I searched a lot about this matter and found all sorts of information..
I presume you know around the P1000, can you take a look at this thread, it is a more detailed question
http://forum.xda-developers.com/showthread.php?t=1988047
Hey guys i really need help, i just posted yesterday and i am shocked that no one replied to me.
This is what i did yesterday i downloaded GB-Stock-Safe-v5, Overcome_Kernel_v4.0.0.tar, and CM10 P1000, md5sum: 157da0dc187216fa924da45182e1307e
OK i am going to repost now i already did those 10 steps but during step 11 Odin says FAIL on the application about something unable to write partion or something like that. now my Tab is frozen on Do not turn off target screen, Did my Tab just got bricked ? how do i restart it ?
So i was unable to turn it off. it was out of battery today, thought it might turn on if i charge it back. but i was both right and wrong it does boots up but now it gives me a Phone and a yellow /!\ Computer icons now, Anyone knows what is happening ?
dc2mx said:
Hey guys i really need help, i just posted yesterday and i am shocked that no one replied to me.
OK i am going to repost now i already did those 10 steps but during step 11 Odin says FAIL on the application about something unable to write partion or something like that. now my Tab is frozen on Do not turn off target screen, Did my Tab just got bricked ? how do i restart it ?
So i was unable to turn it off. it was out of battery today, thought it might turn on if i charge it back. but i was both right and wrong it does boots up but now it gives me a Phone and a yellow /!\ Computer icons now, Anyone knows what is happening ?
Click to expand...
Click to collapse
Hi there. The phone-exclamation-pc thing is another download mode.
At least you still have your bootloader.
Just make sure in the mean time you powered it off and charge it for over 4hrs. You don't want the power to run out.
In the download mode, is Odin detecting the tab? if so, you should still have very good chance to revive it.
Now, question:
- did you use Odin v1.7 included in the GB-stock-safe-v5 package or using other? Remember it is important to use the correct Odin version.
There should be little reason for the flash to fail on repartition if you follow the guide. If you haven't got it, see my signature, and go there to get the PDF guide and jump to page 7.
If you have already followed exactly, then there is a chance you have a damaged internal NAND chip. There are ways to go around that, but lets not go there first.
priyana said:
Hi there. The phone-exclamation-pc thing is another download mode.
At least you still have your bootloader.
Just make sure in the mean time you powered it off and charge it for over 4hrs. You don't want the power to run out.
In the download mode, is Odin detecting the tab? if so, you should still have very good chance to revive it.
Now, question:
- did you use Odin v1.7 included in the GB-stock-safe-v5 package or using other? Remember it is important to use the correct Odin version.
There should be little reason for the flash to fail on repartition if you follow the guide. If you haven't got it, see my signature, and go there to get the PDF guide and jump to page 7.
If you have already followed exactly, then there is a chance you have a damaged internal NAND chip. There are ways to go around that, but lets not go there first.
Click to expand...
Click to collapse
Yes, i already connected my tab to power charger now. Of course i used Odin v1.7 that is included in GB-stock-safe-v5 package. but during Odin process i waited about 5mins then i went to see how is it going, then there's a FAIL in red above the first box. and my Tab is stuck a Do not turn off target mode.
I only did those instructions cx5 provided. So now i am stuck with Phone /!\ Computer icons screen. What am i going to do next ? And do you mean this guide ? https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1 if yes, i haven't read it yet.
This is what i did yesterday i downloaded GB-Stock-Safe-v5, Overcome_Kernel_v4.0.0.tar, and CM10 P1000, md5sum: 157da0dc187216fa924da45182e1307e
What are the differences between P1000L and P1000N ? which CM10 files are right for my tab ?
Are these files that i am going to need ? please do refresh this thread every 5 mins or so. since i need help i will be here too. thank you
UPDATE: OK i just connected my Tab to power charger. but when i unplugged it. it turns off. i guess i need to leave it there for 4 hours to charge it ? i can't check whether Odin are able to detect my tab since i unplugged it and it turns off.
UPDATE2 Hmm my tab is blinking, it was on Phone /!\ Computer Icons screen. but now it's blinking, i meant it went to Phone /!\ Computer Icons screen then back to black screen every 10 seconds. is this normal ?
yes, try charge for more than 4hrs and hope the power goes in.
cx5 instruction seems correct, but it is best to look at page 7 of the guide for 100% accurate placement of the files.
the P1000L/N are Latin American tab that has different touch screen driver.
priyana said:
yes, try charge for more than 4hrs and hope the power goes in.
cx5 instruction seems correct, but it is best to look at page 7 of the guide for 100% accurate placement of the files.
the P1000L/N are Latin American tab that has different touch screen driver.
Click to expand...
Click to collapse
Hmm ok i think i know what went wrong during Odin process. cx5 said select the rom file.TAR for phone section, MUST. but i just read this guide https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1 and it says click PDA and select GB_Stock_Safe_V5,tar and then click Phone.
i didn't click PDA as cx5 instructions didn't mention it. and that's why i am getting FAIL on Odin ?
Anyway, i guess i leave it to charge for 5 hours. then Test whether Odin is able to detect my TAB or not. see you in 5 hours later Priyana. hopefully you're online as i am not sure what to do next after Odin is able to detect my tab.
after charging, boot to download mode again, you may get that same screen like before.
In your PC prepare the Odin exactly like the page 7 of PDF.
Connect the tab to the PC and if you see the tab detected, just flash away, hopefully no error, and it should reboot itself if I am not mistaken, and you get stock GB rom.
Then just continue with the guide, to flash Overcome Kernel 4.0 tar.
After that you will have a CWM recovery, ready to flash CM10
priyana said:
after charging, boot to download mode again, you may get that same screen like before.
In your PC prepare the Odin exactly like the page 7 of PDF.
Connect the tab to the PC and if you see the tab detected, just flash away, hopefully no error, and it should reboot itself if I am not mistaken, and you get stock GB rom.
Then just continue with the guide, to flash Overcome Kernel 4.0 tar.
After that you will have a CWM recovery, ready to flash CM10
Click to expand...
Click to collapse
OK so i am currently charging my Tab and it's blinking from Phone /!\ Computer screen to black screen every 10sec above. Does this screen disappear after fully charging it ? it seems that i am stuck at this screen now. but i can't turn it off and go to the previous hold Volume down and hold power button Do not turn off Target download mode.
Or Does Odin is able to detect my Tab on this Phone /!\ Computer screen too ? since you said it's another download mode please do correct me if i am wrong
yes Odin should detect it at this screen too.
If it doesn't, it will be very hard to fix.
I am surprised that you can't turn it off. Doesn't sounds so good, as it may deplete the batt completely.
Did you try to press the power button for a few seconds (5-10 seconds) to force it off completely?
priyana said:
yes Odin should detect it at this screen too.
If it doesn't, it will be very hard to fix.
I am surprised that you can't turn it off. Doesn't sounds so good, as it may deplete the batt completely.
Did you try to press the power button for a few seconds (5-10 seconds) to force it off completely?
Click to expand...
Click to collapse
Yeah my Tab was turn on for a whole yesterday. since i can't turn it off as it froze at Do Not Turn Off Target download mode. and today i saw the screen was off. then i went to turn it on but nothing i guess the battery is depleted. so i went to charge it and tried turning it on. it does boots up but now showing me this "Phone yellow /!\ Computer screen.
Okay, i just tested trying to shutting it down by holding Power button for 10seconds. but it seems that i can't turn it off. but the Tab itself is a little hot.
I have another question to ask, now i am stuck in this screen, and i have no idea it's charging or not. is this normal ? or usually it shows it's battery charging notification ?
UPDATE: It seems that my Tab is now turn off? it's not showing me the "Phone yellow /!\ Computer screen" now. it looks like it's turn off. nothing there just black
just leave it like this with the charger for maybe 8hr, since it has completely depleted before.
Battery charging animation I heard resides in the kernel.
So if the tab is flashed incorrectly, the battery animation will not be there.
It should still be charging (hopefully). The only way to be sure is to leave it charging for really long.
priyana said:
just leave it like this with the charger for maybe 8hr, since it has completely depleted before.
Battery charging animation I heard resides in the kernel.
So if the tab is flashed incorrectly, the battery animation will not be there.
It should still be charging (hopefully). The only way to be sure is to leave it charging for really long.
Click to expand...
Click to collapse
Hmm Okay, I'm going to let it stay there charging for at least 8 hours +. So be sure to check this thread regularly priyana as i really need your help. Thank you very much
dc2mx said:
Hmm Okay, I'm going to let it stay there charging for at least 8 hours +. So be sure to check this thread regularly priyana as i really need your help. Thank you very much
Click to expand...
Click to collapse
Ugh.. i know that it's just 5 hours+ But i was trying to turn on my tab to test whether Odin can detect my tab. but it seems that it won't power on. i guess it's dead ?
Damn i should have waited for your reply first priyana before doing anything. i just didn't do a important step which is "click PDA and select GB_Stock_Safe_V5,tar and then click Phone" instead of "select the rom file.TAR for phone section, MUST" which i thought click phone and select the tar. but it wasn't my fault as someone here posted the instructions that is misleading and missing the important step. Oh well....thanks for nothing,
Anyway, priyana, i really appreciate you are trying to help me. thank you very much buddy
Don't give up. Just continue charging. Many have experienced worst. I don't believe yours is bricked.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Don't give up. Just continue charging. Many have experienced worst. I don't believe yours is bricked.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Erm.. i can't even turn it on so i guessing it's dead. i don't think i am able to bring it back alive though
Hi,
I rooted my note some weeks ago and I was searching the web, reading all kind of threads and thinking what the problem might be for the last weeks. Finally I decided to register myself on xda and to post my problem.
Like mentioned before I rooted my note via CMW and then flashed a franco kernel, unfortunally I dont know which version, but no custom rom. It all worked fine for 14 maybe 16 hours, then the phone froze after opening a app and after that it stuck at the Galaxy Note N7000 logo. I tried to enter recovery but it didn't work, I can enter downloadmode but I ran out of battery before I could do anything.
Now the phone keeps turning itself on and off the whole time when I try to charge it, the battery image comes for like 1 second and after that the screen turns black again. The battery itself is new so that shouldnt be the problem. I charged it like that for like 4 hours and then tried to enter downloadmode but it only says "battery to low to download".
I hope it is not a hardware problem. If anybody has a idea please help me, I am getting desperate.
Greets
weasl
EDIT: I came from offical 4.0.4 ICS
How old is your phone? Try with another good battery.
Suggestion: you may flash gb via PC Odin and check phone back to normal.
Sent from my GT-N7000 using xda premium
I got my phone last april, so it is not even a year old, but I got a new battery some days before rooting it... I'll try/have to get another one anyway.
Could you give me a link for a stock gb rom please.
Thank you for your quick reply.
Kindly go thru Guru 'drketan' threads and posts.
Sent from my GT-N7000 using xda premium
Found it. Should I use a rom with three parts or with only one? And can I use any rom or one with a special "code" that suits my device, e.g. german....
And just flash the rom and then fullwipe or is wiping not necessary?
I am sorry for the questions but I want to do everything right.
You can use any. Wipe in GB recovery.
Thanks a lot.
Yesterday I finally found somebody to charge my battery, today I flashed a GB stock rom, but I still can`t get any further than the Samsung Galaxy Note logo... It worked one time but I turned the phone off to insert my sim card and it got stuck again.
I tried flashing with pit file and bootloader as well, but no luck.
Could it be a hardware problem? Could a J-tag repair fix it?
Thanks in advantage.
weasl said:
Yesterday I finally found somebody to charge my battery, today I flashed a GB stock rom, but I still can`t get any further than the Samsung Galaxy Note logo... It worked one time but I turned the phone off to insert my sim card and it got stuck again.
I tried flashing with pit file and bootloader as well, but no luck.
Could it be a hardware problem? Could a J-tag repair fix it?
Thanks in advantage.
Click to expand...
Click to collapse
Now your on safe GB rom, enter recovery wipe cache, factory reset, wipe dalvick cache.
Let's know the result
I tried, but I am not able to enter recovery... I press volume up + home + power but I only get the N7000 logo. I have read that you have to press the home button in the right moment to enter stock recovery, could somebody tell if that is true and if yes when do I have to press?
Anyone an idea please? I can enter download mode but not recovery, I downgraded to gb 2.3.6.KK5, I flashed abyss 4.2 but I can get to recovery mode or past the GT N7000 logo. Three times it got to the "package installing" page and one time it even started then I switched it off to insert my sim card and again stuck at the N7000 logo.
I need help please...
weasl said:
I tried, but I am not able to enter recovery... I press volume up + home + power but I only get the N7000 logo. I have read that you have to press the home button in the right moment to enter stock recovery, could somebody tell if that is true and if yes when do I have to press?
Click to expand...
Click to collapse
You have to press the three button combo "a long time" and the power button should be the last one to use.
I always wait until the Samsung Logo appeared 2 times and I see the next animation (depends on your kernel/recovery).
So please try again and hold the three buttons longer.
I flashed the 3-part lc1 gb and did a full wipe. The phone now starts sometimes but gets stuck at the n7000 logo most of the time. When it starts the whole UI feels very laggy, eg. while typing. Recovery mode started one time out of 1000 tries. I am afraid that something with my hardware is wrong. Any ideas? Could a Jtag be a solution? Please help.
try again to get into recovery and do a factory reset from Gb recovery..
press it until you get to recovery. DO NOT remove your fingers when you see n7000 bootlogo. keep pressing . keep pressing. keep pressing.
Recognized Distributorâ„¢
I made it in the recovery, did another fullwipe, but it still lags while typing or opening/closing an app and still does not boot proper, I have to try several times to get past the logo screen and it works only when I go in downloadmode and boot from there. Entering the recoverymode still only works randomly. Any idea?
Edit: it also lags while scrolling down/up
weasl said:
I made it in the recovery, did another fullwipe, but it still lags while typing or opening/closing an app and still does not boot proper, I have to try several times to get past the logo screen and it works only when I go in downloadmode and boot from there. Entering the recoverymode still only works randomly. Any idea?
Edit: it also lags while scrolling down/up
Click to expand...
Click to collapse
In all you posts here you never wrote exactly what version of which Rom you installed in whatever way.
That's why I'm still not convinced that you have "defined state" and giving good advice is try&error.
So please start telling: how did you flash, what GB or ICS or JB version, Stock Rom or Custom Rom.
,Sorry, I flashed the n7000xxlc1 - open europe with odin PC, stock, prerooted and in 3 parts. After that I did a fullwipe, the phone turns on after a few tries, most time after I go in download mode and restart from there. It lags while it is on, like short freezes, I tried to install the OTA update to ICS but failed.
Before that I was stuck on the Samsung Galaxy Note logo after flashing a franco kernel via CWM (I am not sure which version but it came with the guide to root, so I thought it could not be bad)
Edit: I flashed the xxlsc 4.1.2 jelly bean offical leak via odin PC, and I still have the same problems. I takes 5-6 reboots to actually start the device and it is very laggy, almost unusable. Every second or so it freezes for short time.
Any help please? I would send it to someone to do a JTAG repair if this could help. I just dont want to waste the money, so if anyone has experienced a problem like this please help me.
Is this a brick revived phone?
Hi all,
I recently received a note 5 SM-920i.
I rooted it and installed TWRP using a few guides from XDA. After that, i created a backup just in case (6.0.1) and tried to flash LineageOS. I didn't know that there was a difference between 920i/c/g/t etc and i just tried to flash without even checking.
When I tried flashing, installation got stuck (see pictures attached). I couldnt stop installation and go back to TWRP menu but i could take screenshots and swipe up and down. I tried to restart, hard reset, shut down but nothing helped, it was just stuck like this.
Once the battery ran out i wanted to charge the note 5 and try to go into recovery mod to re-install the backup but now its stuck on the charging logo even when its not connected to power. When I try to open it or go to recovery mode, nothing happens.
Has anyone ever had such an issue?
Would appreciate any help with this.
Thanks!!!
You need to flash stock rom with Odin. Volume up and power buttons same time about 7 second and right away when screen goes black volume down,home,power buttons same time. You get into download mode. Press volume up when first green display shows.
Download stock firmware for your model without auto restart options in Odin.
When you get pass firmware flash put your phone charger and leave there for little while. Then again force restart.
Volume, power button and keep those pressed so long that hopefully blue screen start and goes recovery mode and leave phone do work for you.
BTW all these custom roms some how not work for me.
Phone just start to be unstable and restart all the time.
Now finally I get stock nougat rom to work with Nova laugher.
Over 3 hours sot still 46% battery left and no single restart so far. Samsung pay off,GPS battery safe. Greenfinity.
Mobiledata 3G/2G. WiFi on. NFC off. Location history off.
That setup work for me and first time phone is stable.
And awesome battery life.
Hope this helps you.
apelamod said:
You need to flash stock rom with Odin. Volume up and power buttons same time about 7 second and right away when screen goes black volume down,home,power buttons same time. You get into download mode. Press volume up when first green display shows.
Download stock firmware for your model without auto restart options in Odin.
When you get pass firmware flash put your phone charger and leave there for little while. Then again force restart.
Volume, power button and keep those pressed so long that hopefully blue screen start and goes recovery mode and leave phone do work for you.
BTW all these custom roms some how not work for me.
Phone just start to be unstable and restart all the time.
Now finally I get stock nougat rom to work with Nova laugher.
Over 3 hours sot still 46% battery left and no single restart so far. Samsung pay off,GPS battery safe. Greenfinity.
Mobiledata 3G/2G. WiFi on. NFC off. Location history off.
That setup work for me and first time phone is stable.
And awesome battery life.
Hope this helps you.
Click to expand...
Click to collapse
Thanks, will try it now.
Where can i get stock firmware for the 920i? i looked for it everywhere and couldnt find it...
Great remember when battery is slow it's not start after flash but that method worked for me...
Go update.com ?
apelamod said:
Great remember when battery is slow it's not start after flash but that method worked for me...
Go update.com
Click to expand...
Click to collapse
So you dont know where i can find stock rom for sm-920i?
Sorry it was updato.com try that ?
roygush said:
So you dont know where i can find stock rom for sm-920i?
Click to expand...
Click to collapse
you can find at sammobile. register free member for download. but slow download
Sammobile but updato give faster download... Let me know if you get this work for you ?
My first full charge after fresh flash...
Hi Guys,
I have used my T-mobile Note 4 for years since it came out. I have replace the batteries once, but like a month ago when there was an update my phone keep restarting and turning off. I then had to get another phone because of that I still cant get it to restart even after I bought a new battery, updated the firmware. can some one guide me the right way to do this right. I think I am not doing the flashing the right way.. with oldin, and the correct firmware. after I do that I get this installing updates andriod show and it stops and reboots again. please help. thanks
- this phone was never locked before
- Replaced the battery once
- one day when there were a bunch of apps that needed update with probably 35% battery I let it update and after that it kept rebooting
- So installed the twrp recovery.tar.md5 from here that didnt help
- So then from sammobile I downloaded the latest firmware and installed it, that didnt help too
So the question is can I just wipe the whole phone and start fresh? -
manishp101 said:
Hi Guys,
I have used my T-mobile Note 4 for years since it came out. I have replace the batteries once, but like a month ago when there was an update my phone keep restarting and turning off. I then had to get another phone because of that I still cant get it to restart even after I bought a new battery, updated the firmware. can some one guide me the right way to do this right. I think I am not doing the flashing the right way.. with oldin, and the correct firmware. after I do that I get this installing updates andriod show and it stops and reboots again. please help. thanks
- this phone was never locked before
- Replaced the battery once
- one day when there were a bunch of apps that needed update with probably 35% battery I let it update and after that it kept rebooting
- So installed the twrp recovery.tar.md5 from here that didnt help
- So then from sammobile I downloaded the latest firmware and installed it, that didnt help too
So the question is can I just wipe the whole phone and start fresh? -
Click to expand...
Click to collapse
Can anyone help please???
manishp101 said:
Can anyone help please???
Click to expand...
Click to collapse
Follow these instructions and hopefully it will work.
Charge your battery full before begin
1,Download latest stock firmware
2,open odin options and check on "nand eraseall"
3,choose AP upload firmware and flash firmware.
4,after firmware flashed go to stock recovery and do factory reset.
5,reboot and wait 15 to 20 minutes.
Done.
manishp101 said:
Can anyone help please???
Click to expand...
Click to collapse
mine was doing the same, i got a new original battery and got fixed. ever since i update my firmware with no issues
manishp101 said:
Hi Guys,
I have used my T-mobile Note 4 for years since it came out. I have replace the batteries once, but like a month ago when there was an update my phone keep restarting and turning off. I then had to get another phone because of that I still cant get it to restart even after I bought a new battery, updated the firmware. can some one guide me the right way to do this right. I think I am not doing the flashing the right way.. with oldin, and the correct firmware. after I do that I get this installing updates andriod show and it stops and reboots again. please help. thanks
- this phone was never locked before
- Replaced the battery once
- one day when there were a bunch of apps that needed update with probably 35% battery I let it update and after that it kept rebooting
- So installed the twrp recovery.tar.md5 from here that didnt help
- So then from sammobile I downloaded the latest firmware and installed it, that didnt help too
So the question is can I just wipe the whole phone and start fresh? -
Click to expand...
Click to collapse
download and install this using odin
https://www.androidfilehost.com/?fid=24651442761499080
if that didn't fix Im afraid you have to do the factory reset using TWRP factory reset or android recovery reset
JotaSka said:
mine was doing the same, i got a new original battery and got fixed. ever since i update my firmware with no issues
Click to expand...
Click to collapse
I did buy a battery from Battery Plus but that didn't help...Also the battery that was there was not too old and a good brand battery. I may have to try other options
zfk110 said:
download and install this using odin
https://www.androidfilehost.com/?fid=24651442761499080
if that didn't fix Im afraid you have to do the factory reset using TWRP factory reset or android recovery reset
Click to expand...
Click to collapse
Thank you!.... I will have to try this. I am not not worried about anything on the phone as long as I can get it working again that will be good enough. I will let you know what happens. thanks again for the response.
Trex888 said:
Follow these instructions and hopefully it will work.
Charge your battery full before begin
1,Download latest stock firmware
2,open odin options and check on "nand eraseall"
3,choose AP upload firmware and flash firmware.
4,after firmware flashed go to stock recovery and do factory reset.
5,reboot and wait 15 to 20 minutes.
Done.
Click to expand...
Click to collapse
Thank you for your response, unfortunately this didn't work for me I did install the latest firmware , but the phone doesn't go to the stock recovery mode for some reason and keeps rebooting. it does say Recovery booting... but it shuts off. so I have no way to do that even if I keep pressing the volume up, power and the home buttons pressed then release the home and power and keep pressing the volume button.
manishp101 said:
Thank you for your response, unfortunately this didn't work for me I did install the latest firmware , but the phone doesn't go to the stock recovery mode for some reason and keeps rebooting. it does say Recovery booting... but it shuts off. so I have no way to do that even if I keep pressing the volume up, power and the home buttons pressed then release the home and power and keep pressing the volume button.
Click to expand...
Click to collapse
Try to flash plilz recovery and do factory reset and reboot see if it works.
Uncheck auto reboot in odin and
choose AP then flash philz recovety
https://mega.nz/#!CREnTQ6A!JsOb3RuC5BPfUcIAgLjvjK8zzkRVkdvNYEe8WRffJ-c
Trex888 said:
Try to flash plilz recovery and do factory reset and reboot see if it works.
Uncheck auto reboot in odin and
choose AP then flash philz recovety
https://mega.nz/#!CREnTQ6A!JsOb3RuC5BPfUcIAgLjvjK8zzkRVkdvNYEe8WRffJ-c
Click to expand...
Click to collapse
So I tried this yesterday evening,
- I did install the latest firmware which was suggest in by one of the comments above :
https://www.androidfilehost.com/?fid=24651442761499080
- then flashed it with philz recovery and did the factory reset and rebooted it but no luck.
- when restart the phone, its shows the Samsung note 4 logo then shuts off.
im afraid to say that your note 4 might bebroken now. If you go to the note 4 reddit, this has happened to many people and has something to do with the solder degrading after a few years iirc. Best thing you can do is buy a motherboard replacement for around 60 on eBay if nothing else works. I have replaced 3 note 4 motherboards for people i know that this has happened to.
manishp101 said:
So I tried this yesterday evening,
- I did install the latest firmware which was suggest in by one of the comments above :
https://www.androidfilehost.com/?fid=24651442761499080
- then flashed it with philz recovery and did the factory reset and rebooted it but no luck.
- when restart the phone, its shows the Samsung note 4 logo then shuts off.
Click to expand...
Click to collapse
- Ran into another issue where I am getting this 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.'
- For some reason the Oldin froze and I had no way to stop the download process.
- I tried using Kies to install the recovery but cannot, I did look for SM-N910T ...but nothing.
udownwitopp said:
im afraid to say that your note 4 might bebroken now. If you go to the note 4 reddit, this has happened to many people and has something to do with the solder degrading after a few years iirc. Best thing you can do is buy a motherboard replacement for around 60 on eBay if nothing else works. I have replaced 3 note 4 motherboards for people i know that this has happened to.
Click to expand...
Click to collapse
^^^This. I just had to replace our two Note 4 after years of service over the last two months. Same symptoms as yours. It is most assuredly hardware related.
Even "better", from the two replacements sent by TMo, one failed within the week. The replacement just abruptly shut off and doesn't turn back on unless the battery is removed for 20 min. or so.
However, once it turns on it freezes. Try to boot to recovery, it freezes before even loading it up. One time the screen display even corrupted on me.
So, tldr, it is time for a replacement MoBo. Good luck!
manishp101 said:
So I tried this yesterday evening,
- I did install the latest firmware which was suggest in by one of the comments above :
https://www.androidfilehost.com/?fid=24651442761499080
- then flashed it with philz recovery and did the factory reset and rebooted it but no luck.
- when restart the phone, its shows the Samsung note 4 logo then shuts off.
Click to expand...
Click to collapse
You have a bad battery, replace with this one dont buy off the eBay they are fake
https://www.amazon.com/dp/B072KJRJ45/ref=psdc_7073959011_t4_B06XV8JSKK
The new battery may initially help, but it sounds suspiciously like the mmc is beginning to fail. Wakelock app set to option 4. Only thing that worked for me.
https://play.google.com/store/apps/details?id=eu.thedarken.wl
Good luck, my friend!
Could be a failing emmc
Soapy! said:
Could be a failing emmc
Click to expand...
Click to collapse
Is there a Forum I can follow to fix this? If you know let me know I will also check and see which one I can check. thank you
manishp101 said:
Is there a Forum I can follow to fix this? If you know let me know I will also check and see which one I can check. thank you
Click to expand...
Click to collapse
Try to go back to 4.4.4 by flashing t2 firmware see if that fixes it ,while i was on anyother build everything would either lag or freeze, internet,play store, toggles nothing worked even after factory install firmware and factory restore i went to 4.4.4 and no issues 48 hrs later .
bigbabo said:
Try to go back to 4.4.4 by flashing t2 firmware see if that fixes it ,while i was on anyother build everything would either lag or freeze, internet,play store, toggles nothing worked even after factory install firmware and factory restore i went to 4.4.4 and no issues 48 hrs later .
Click to expand...
Click to collapse
Why is it that the When I restart the phone show the Samsung Galaxy note 4 powered by Android screen and then when it has to go to the next screen the Samsung (pink) only the S partially shows, freezes and then the blue light comes on and the light now stays on, screen go blank and stays that way even if I do a restart by pressing the volume down + power,
manishp101 said:
Why is it that the When I restart the phone show the Samsung Galaxy note 4 powered by Android screen and then when it has to go to the next screen the Samsung (pink) only the S partially shows, freezes and then the blue light comes on and the light now stays on, screen go blank and stays that way even if I do a restart by pressing the volume down + power,
Click to expand...
Click to collapse
Your emmc is gone bad , pull battery put it back in dont power it on put it in freezer for 45 min than try to turn it on if it does you still have chance of fixing it somewhat if not than sorry to say but u need either new phone or replace the emmc