hi,
i've a galaxy s with Cyanogen Mod 10.1 Nightly intalled and currently up to date.
but i have a problem, my phone sometime reboot and i can't discover the cause of this.
i try to uninstall my apps one by one but with no positive results.
i thought the problem was the CM10.1 because is a nightly rom, so i've installed the stable version of CM10 but the problem appears again.
so now i have installed again the CM10.1 .
can someone help me with this problem ?
thanks a lot and sorry for my bad english
None can help me?
Deep idle enabled?
Sent from my GT-I9000 using xda app-developers app
Latrop said:
Deep idle enabled?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
hi, thanks for the answer.
i don't know it deep idle is enabled. how can i do to see this?
thanks
Check the nstools app if you don't have it, its on play store
Sent from my GT-I9000 using xda premium
maybe you flash the ROM something wrong and break the system
Sent from my GT-I9001 using xda premium
lomba91 said:
hi,
i've a galaxy s with Cyanogen Mod 10.1 Nightly intalled and currently up to date.
but i have a problem, my phone sometime reboot and i can't discover the cause of this.
i try to uninstall my apps one by one but with no positive results.
i thought the problem was the CM10.1 because is a nightly rom, so i've installed the stable version of CM10 but the problem appears again.
so now i have installed again the CM10.1 .
can someone help me with this problem ?
thanks a lot and sorry for my bad english
Click to expand...
Click to collapse
Which kernel you are using?
you may try this,
1) reflash the rom with full wipe.
2) if you are overclock the OC clear int.d and NStool setting or using kernel cleaning script
note: only use one kernel setting apps ( e.g NStool , semaphore manager and +++)
If you are using semaphore kernel try not to use NStool setting and semaphore manager.
Hope this will help. :fingers-crossed:
Samtan4326 said:
Which kernel you are using?
you may try this,
1) reflash the rom with full wipe.
2) if you are overclock the OC clear int.d and NStool setting or using kernel cleaning script
note: only use one kernel setting apps ( e.g NStool , semaphore manager and +++)
If you are using semaphore kernel try not to use NStool setting and semaphore manager.
Hope this will help. :fingers-crossed:
Click to expand...
Click to collapse
i've already flashed the rom with full wipe but nothing change.
i use the the cm10.1 kernel without overclock.
Latrop said:
Check the nstools app if you don't have it, its on play store
Click to expand...
Click to collapse
i've installed the nstools app and i have min CPU on 100mhz, max Cpu on 1000mhz and the ondemand governor.
Try a different kernel
Sent from my GT-I9000 using xda premium
Latrop said:
Try a different kernel
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
what kernel you think i sould try?
Semaphore if that don't work there's Mackay and devil as well
Sent from my GT-I9000 using xda premium
i've flashed semaphore kernel and reinstalled the cm 10.1 rom.
but there is always the same problem
In not sure mate sorry
Sent from my GT-I9000 using xda premium
i think the problem is the app of the sim card, because sometime it disappear from the drawer. This app is named "kit strumenti sim" (in italian) and is a default app...
I kinda have a similar problem with the OP. Except, my SGS (running CM10.1) only random reboots if I'm using another kernel, other than stock (mostly, I tried with Semaphore, diff builds). Any ideas anyone?
I would really like to use Semaphore, due to its deep idle and other options.
Sorry if I off-topic'ed here!
lomba91 said:
i've flashed semaphore kernel and reinstalled the cm 10.1 rom.
but there is always the same problem
Click to expand...
Click to collapse
if you flash semaphore kernel(2.9.++ is for 4.2.++ ROM) and reflash the cm10.1 rom yor kernel will change to cm10.1 stock kernel.
so the step should be flash the rom and reboot to recovery and flash the kernel you like. for me flash a new kernel i will clear the NStools settings and init.d directory from advanced clear before i flash any new kernel.
Related
I use Team ICSSGS RC4.2 with Semaphore 0.9 (and 0.8.x before) for quite some time now, and very happy with it.
I even have BLN working with enabling it in NSTools.
My problem is that every time I have the phone restarted for ever reason there is, I get a boot loop, until I clear NSTools settings in recovery mode.
Does anyone have any other way to have BLN without the use of NSTools?
Bln control - free app from market
Sent from my GT-P7500 using xda premium
scubadude said:
Bln control - free app from market
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
I did try it at first before NSTools and it didn't work.
But I'll give it another try...
ulituan said:
I did try it at first before NSTools and it didn't work.
But I'll give it another try...
Click to expand...
Click to collapse
hallelujah...
Removed NStools and cleared its settings in recovery mode.
Installed BLN control app again. and... it works now.
Strange but true.
10x
Glad its working.
Sent from my GT-P7500 using xda premium
the Sema 0.9.0 is very buggy the 0.8.1 is better it is stabel and fast and bln is working for me
There is a update 0.9.1 which is better than 0.9.0
Sent from my GT-P7500 using xda premium
sorry, bur how do I install this kernel in the same ROM as you? i know its easy, but you know, a noob is a noob xd.
And how does Semaphore feel in this ROM?
Sent from my GT-I9000 using XDA App
pixelexip said:
sorry, bur how do I install this kernel in the same ROM as you? i know its easy, but you know, a noob is a noob xd.
And how does Semaphore feel in this ROM?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
just:
Download the kernel file (ZIP)
Place it on the phone
boot to recovery mode
apply the update by choosing the file
Hi!
How do I update SlimICS with Semaphore kernel installed (the current versions when new SlimICS version is out)?
Just clean /cache and Dalivic?
Clean something else?
Then install the SlimICS components in CWM?
Do i have a "clean" SlimICS after that without semaphore components left?
And then optionally reinstall semaphore kernel?
Another question: When i want to test Semaphore kernel.... how can i completly uninstall the kernel after testing?
THX!
Mart
Before updating I always revert all semaphore settings to stock, in recovery wipe cache and dalvik, clear init.d and ns tools then follow update changelog instructions.
If you want to revert back to stock kernel after a play with semaphore, the kernel is provided over at the slim website, check the version though.
Sent from my GT-I9000 using xda premium
Thank You for the fast reply!
Do you mean the "Base_Samsung_4.0.zip" as SlimICS kernel?
MrMartin0815 said:
Thank You for the fast reply!
Do you mean the "Base_Samsung_4.0.zip" as SlimICS kernel?
Click to expand...
Click to collapse
No, the actual kernel I think is posted in unsupported mods section
Sent from my GT-I9000 using xda premium
Heads up.....the one posted is 3.9, I don't know if this is the same as the 4.0
Sent from my GT-I9000 using xda premium
Sorry I have to ask... do you have the Link for me?
If you are on slim use the ota app!
Sent from my GT-I9000 using xda premium
Thank you again!
Is there a significant performance gain using semaphore kernel compared to stock slim kernel for you? Is it worth trying?
THX
Martin
MrMartin0815 said:
Thank you again!
Is there a significant performance gain using semaphore kernel compared to stock slim kernel for you? Is it worth trying?
THX
Martin
Click to expand...
Click to collapse
I find the bigmem mode of the semaphore kernel to be better as more ram means better multitasking
I'm running CM10 nightly, and wondering if I will gain any performance improvement (without OC) and longer battery life if I flash one of the alternative kernels on XDA (looking at Devil and Semaphore as those seem to be the most popular)?
yes and yes, but it all depends on how you configure the kernel options and how you use your SGS...
Sent from my GT-I9000 using xda app-developers app
yes, definitely!
but to get the "best" result, of course you have to let it settle for atleast 3 days..
here is a youtube link on how to flash them: http://www.youtube.com/watch?v=kCBN-_zu5cY
i hope this helps,
cheers
Thanks for the answers. I was hoping for recommendations, do you have any?
Semaphore is looking good to me. Opinions?
I'd go with semaphore for ICS...
But for CM10 I'd use Devil..
But that's just me
Sent from my GT-I9000 using Tapatalk 2
If you want stability then semaphore.But if you want more tricks to make your phone even faster it is devil of course. There is one more kernel to try Mackay.
Test each to get the right one for you.
Sent from my GT-I9000 using xda premium
Semaphore is the one you need .
What else from having great speed with stability. Yeah, maybe Devil could provide some more speed, which is unnoticeable, for me at least.( except the benchmark tests )
Sema is the most stable one.
But devil isn't bad too.
Try them. But give your phone about 5 minutes after flashing and don't be frustrated when it's a bit laggy after first reboot.
Last days I tryed makay. --> I prefer sema
Sent from my GT-I9000 using xda app-developers app
I prefer devil. My phone still lasts a whole day (7am - 12pm) and is much faster. I like all the options.
Sent from my GT-I9000 using xda premium
On JB roms i always use the devil kernel even if the Semaphore is a very good kernel, Devil kernel allows me to entirely use my phone's habilities with no more battery drain than Sema
you will instantly notice more speed and smoothness with flashing semaphoer kernel.
+ more speed if you set up liveOC to 114%
Does anyone have any links? I'm using CM10 nightly and need a kernel so that BLM and Voodoo sound will work. I tried the latest semaphore 2.8.0 via Odin but the phone would not boot.
frazefast said:
Does anyone have any links? I'm using CM10 nightly and need a kernel so that BLM and Voodoo sound will work. I tried the latest semaphore 2.8.0 via Odin but the phone would not boot.
Click to expand...
Click to collapse
You should read the description more carefully. The 2.8 kernel is for JB 4.2 not CM10. Flash the 2.6.5 kernel.
Sent from my GT-I9000 using xda premium
Devil cause you are able to set wifi mode: powersave, stronger
Sent from my GT-I9000 using xda premium
Hello;
If I whant to get the most from my phone what kernel should i use and please if you can put some download links for kernel that you are suggesting.
Model Number:GT-I9000
Android version:4.1.2
Baseband version:I9000XXJVT
Kernel Version:
3.0.31.gdabec1a
[email protected]#1
CyanogenMod Version:10.0.0-galaxysmtd STABLE
Build number:
cm_galaxysmtd-userdebug 4.1.2 JZO54K
eng..20121113.054130 test-keys
Thank you for your time and suggestions.
The one and only Semaphore. Newest version 2.6.5(s)
The (s) is for if you use 403MB RAM configuration.
www.semaphore.gr
Sent from my GT-I9000 using Tapatalk 2
I have few more questions...will i flash only kernel or i need to flash the rom together with kenrel...and can i use odin to flash kernel?Sorry for all thease questions im noob guy in this area
You don't have to flash a rom if you're happy with the one you're using. And you can download .zip's and flash in CWM if you like, but I've found that the only times I've ever got into a boot loop when flashing a kernel are by doing it this way. Not that it has happened often. But for that reason, i prefer to flash my kernels .tar in odin, I've never had a problem doing it that way, but whatever way you choose to do it take a nandroid first, just in case.
Sent from my GT-I9000 using Tapatalk 2
Kernel flashed via odin...everything works perfectly! Thank you
LeRadelle said:
Kernel flashed via odin...everything works perfectly! Thank you
Click to expand...
Click to collapse
Glad to hear it. No problem
Download semaphore manager app if you haven't already done so. Also, if you used the (s) version, you need to make sure and select the bigmem option in semaphore manager and reboot for settings to take effect. Then you have 403MB RAM.
Sent from my GT-I9000 using Tapatalk 2
I recently instaled CM9 4.0.4 on my i9000 and the battery life sucks. I want to flash Semaphore kernel, but i need some advices ..like what version should i flash etc.
Can someone help me ?
EDIT: I tried to flash 2.7.4 version + .pit file but after that i get boot loop. I've flashed again 2.3.3 and then CM9 4.0.4 ..
Any ideas ?
xViBeR said:
I recently instaled CM9 4.0.4 on my i9000 and the battery life sucks. I want to flash Semaphore kernel, but i need some advices ..like what version should i flash etc.
Can someone help me ?
EDIT: I tried to flash 2.7.4 version + .pit file but after that i get boot loop. I've flashed again 2.3.3 and then CM9 4.0.4 ..
Any ideas ?
Click to expand...
Click to collapse
Flash a Semaphore kernel designed for ics. See http://www.semaphore.gr/homepage/semaphore-ics which also has links to xda-developers.
Oct-Al said:
Flash a Semaphore kernel designed for ics. See http://www.semaphore.gr/homepage/semaphore-ics which also has links to xda-developers.
Click to expand...
Click to collapse
I downloaded Semaphore_ICS_1.3.0. That's all i need, right ?
Just choose this file on PDA and flash ?
EDIT: I already did that and worked.
Only 1 thing: after flashing, i had to push the power button to start ... didn't had to reboot after flash ?
xViBeR said:
I downloaded Semaphore_ICS_1.3.0. That's all i need, right ?
Just choose this file on PDA and flash ?
EDIT: I already did that and worked.
Only 1 thing: after flashing, i had to push the power button to start ... didn't had to reboot after flash ?
Click to expand...
Click to collapse
Semaphore 1.3.0 is the one you need. You can flash it through Clockworkmod recovery, its the easiest way. Don't forget to wipe cache and dalvyk cache before flashing a new kernel. Besides semaphore you could also try devils kernel 1.0.3. It is more performance oriented. Flash the one you like. The only thing I don't like about semaphore 1.3.0 is that wifi tethering doesn't work.
Reboot after flashing is crucial, but if you have the new semaphore configuration app, you did it right! Just reboot one more time to be sure everything works alright.
Sent from my GT-I9000 using xda app-developers app
Besides the very low battery life, no problems ...
xViBeR said:
Besides the very low battery life, no problems ...
Click to expand...
Click to collapse
My only problem was the lack of usb tethering...had no probs with battery. U sure u have the right governor and stuff?
Sent from my GT-I9000 using xda app-developers app
I installed correctly. Anyway, i'm back on CM7. good battery, not laggy.. it's pretty nice.
Sent from my GT-I9000 using xda premium
xViBeR said:
I installed correctly. Anyway, i'm back on CM7. good battery, not laggy.. it's pretty nice.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Knowing I am being offtopic: Whats your battery like on cm7?
Cause with cm9 and semaphore you shouldn't have had a huge drain...
Sent from my GT-I9000 using xda app-developers app
On CM7, the battery life is good (1,2 days). On CM9 it sucks... i had to recharge after 15-16 hours max,everytime.
Sent from my GT-I9000 using xda premium
have you used the cf-root kernel?
I used semaphore 1.3.0 kernel.
Sent from my GT-I9000 using xda premium
Hello
Sorry for my language.. i'm french : D
Yesterday i have flash c-rom mix v6 on my galaxy S i9000 and the defaut kernel is semaphore and i would like to install devil kernel or mackay.. i have try to flash this two kernel and i have the same problem.. at the boot i have com.android.phone has stopped.. i can't use my phone because this error appears immediately after click "ok". When i flash a semaphore kernel, the phone is working without error. Have you any solution ?
Thanks!
I don't think there is an official single Boot devil kernel yet which one did you try?
Sent from my GT-I9000 using XDA Premium HD app
kevtrysmoddin said:
I don't think there is an official single Boot devil kernel yet which one did you try?
Sent from my GT-I9000 using XDA Premium HD app
Click to expand...
Click to collapse
I successfully to install a devil kernel.. i have use this : Devil4.2_galaxysmtd_20130204.zip
Thank you for your help