Database Develop

[Q] Problem /w rooting LA6

Hi,
I have Galaxy note with Kernel version 2.6.35.7...LA6, Slovenia (SiMobil). As far is i understood from here:
http://forum.xda-developers.com/showthread.php?t=1329360
It's no directly rootable, so i used InitialCFRootFlasher (CF-Root-SGN_XX_SER_LA6-v5.0-CWM5). What happened is visible in the Attachment image - it stops (left it for 30 minutes and then plugged the phone out) at pushing zImage (there is zImage file in zImage folder).
I also tried downgrading to KJ1 (4th post in the link i've provided) and Odin got stuck here:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
As far as i know, i've followed all the steps correctly, i've started odin in recovery mode thingy (and with phone turned on, everything :/) and it gave pretty much the same results. I have unknown sources and USB debugging checked.
Only one thing (if it happens to be relevant): i've reset the phone from recovery mode (volume+home+power) before doing all this and the only visible difference now (except of course from everything gone) is that it now asks me for USB Connection (Copy from/to computer) and it did connected automaticly before.
Also, the keyboard layout has numbers so it reseted to the point of the latest patch.
Help wold be appreciated, thank you for your time.
0bj4ct7

what is the rom version? if its is LA6 then it it not directly rootable and you need to downgrade to root then upgrade again using mobile odin to keep root status

As i said it is LA6 and i tried to downgrade to KJ1 from the link i have posted. Thus the Odin error message in my first post :/
I'm now downloading LA1 from this tutorial:
http://forum.xda-developers.com/showthread.php?t=1535025
and will try to flash/root it with Odin.
Anyone knows why it didn't want to connect the first time? (see the Odin log)
btw my goal is to install CheckROM Note HD 6 with mobile odin after rooted.

Sorry for the double-post, but this is what happened with take 2 on Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
So eventually the same thing happened: It failed to establish connection with my phone, has anyone any idea why and how could i make it work? :/

strange !!
tell you what ,just to be sure :
1. is it odin 1.8.5 , if not then download from this link http://dl.xda-developers.com/attachdl/3f3aee012a84b80d9824245ec63e1c5a/4f99a80d/8/1/5/3/7/0/Odin3-v1.85.zip
2. check your cable ,use another cable if you have any.
3. follow this method by DR.Ketan
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: https://rapidshare.com/files/369028110/SGN_XX_OXA_KJ1_FACTORYFS.zip
(special thanx to schiwa for providing premium a/c to host file)
Code:
Mirror for Above file (in case above link not works then only)
Download this three files
[url]http://www.mediafire.com/?7vf637co8frdqqg[/url]
[url]http://www.mediafire.com/?kkvdsf5vh8zipzi[/url]
[url]http://www.mediafire.com/?l6qqicvibzhxt18[/url]
- Tool to join them, run the following file and locate the .001 file.
[url]http://www.mediafire.com/?btrusgmd1v2d72q[/url]
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
also check this thread http://forum.xda-developers.com/showthread.php?t=1329360

Thanks to all here, it turned out i actually wasn't using download, but recowery mode
After i actually pressed VOL. DOWN at the beginning it worked perfectly.
Thanks for all the answers, I'd recommend emphasizing tese keys so people like me won't repeat this.
Cheers (CheckROM works perfectly

''firmware encountered an issue'' for galaxy note

Hi everyone
My phone is ''firmware encountered an issue'' i searhing this Thread but i cant do it. Cuz i try everything.
My problem is ODIN always FAIL always
I remove drivers and no kies. I try 6 different offical roms but no different.
So, What did I do?
I use
JB leak
RocketRom JB
RocketRom v12 ICS
I use offical firmware
OJVKL1
XXLRK - N7000VD2LR1
XXLRK
My complaining is This roms is so slow i hate it. Maybe my phone is slow but it's impossible.
HARDRESET-UPDATA-ALLWIPE but always slowly. Firsday everything is good but second day is so laggy. And i think maybe i need a old rom.
GB
So i' download XXLA4 and install. Everything is great but when i XXLA4 root everything messed up.
This is root ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
and my phone is ''firmware encountered an issue'' and i think back is good ill try XXLRK again but i install mistakenly i select ''N7000_16GB_Q1_20110914-stock.pit'' file and my phone is sleeping now.
So i enter the download mode... Download mode is normal and when i install'a Kernel_JellyBeer_v3.1_STD_CWM_Flashable.zip
I see recovery menu i'll full wipe and back to instaling odin say again FAIL FAIL FAIL...
Please Help me Thank you so much
PEACE

orcunpakten said:
Hi everyone
My phone is ''firmware encountered an issue'' i searhing this Thread but i cant do it. Cuz i try everything.
My problem is ODIN always FAIL always
I remove drivers and no kies. I try 6 different offical roms but no different.
So, What did I do?
I use
JB leak
RocketRom JB
RocketRom v12 ICS
I use offical firmware
OJVKL1
XXLRK - N7000VD2LR1
XXLRK
My complaining is This roms is so slow i hate it. Maybe my phone is slow but it's impossible.
HARDRESET-UPDATA-ALLWIPE but always slowly. Firsday everything is good but second day is so laggy. And i think maybe i need a old rom.
GB
So i' download XXLA4 and install. Everything is great but when i XXLA4 root everything messed up.
This is root ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
and my phone is ''firmware encountered an issue'' and i think back is good ill try XXLRK again but i install mistakenly i select ''N7000_16GB_Q1_20110914-stock.pit'' file and my phone is sleeping now.
So i enter the download mode... Download mode is normal and when i install'a Kernel_JellyBeer_v3.1_STD_CWM_Flashable.zip
I see recovery menu i'll full wipe and back to instaling odin say again FAIL FAIL FAIL...
Please Help me Thank you so much
PEACE
Click to expand...
Click to collapse
Did you do any full wipes on ics? Where is odin failing, is it factory fs?
Sent from my GT-N7000 using xda premium

happened to me too..
That "firmware encountered an issue" is an indication that the system is corrupted to the point that it cant manage to startup..
I got that problem because of my stupidity.. Plugged my phone to the defective USB port and when I started flashing, I accidentally moved the cable and BAM! Phone is disconnected, and flash failed bigtime..
Your only fix for that if you ask me is do another flash... Try pulling out the battery for 10mins and try to boot into download mode.. That's how i was able to recover my phone from that screen..
I remember that message offering to run emergency recovery using Kies but it is totally useless.. trust me..
Make sure you're plugging in your phone to the USB port DIRECTLY on the motherboard of the computer (the ports at the back) not the ports on the front panel of the case of your computer..
If you're still encountering problems, I believe youre looking at a bricked device and seek more advanced assitance from people here..

SpyderTracks said:
Did you do any full wipes on ics? Where is odin failing, is it factory fs?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
usually factory fail.
i did every time fullwipe

Sounds like superbrick, but try flashing stock gb with pc Odin.
Sent from my GT-N7000 using xda premium

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Yep, that's superbricked. You can either repartition the emmc chip, you'll lose about 3gb of internal sd card and won't be able to run stock roms.
If you have warranty get a reply placement, just say you were updating through Kies when this happened.
Sent from my GT-N7000 using xda premium

SpyderTracks said:
Yep, that's superbricked. You can either repartition the emmc chip, you'll lose about 3gb of internal sd card and won't be able to run stock roms.
If you have warranty get a reply placement, just say you were updating through Kies when this happened.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
But i can get download mode and if i install odin ''AbyssNotekernel42CWTouchOriginalLogo'' i get recovery mode...

just once try to remove the battery for a few seconds and put the phone in download mode and flash the rom again or use a GB rom..

nokiamodeln91 said:
just once try to remove the battery for a few seconds and put the phone in download mode and flash the rom again or use a GB rom..
Click to expand...
Click to collapse
i try another laptop now... Cuz i remember what i do.
My last rom is stock XXLRK rom. And i tired slowly
i try everything HARDRESET-UPDATA-ALLWIPE but always slowly. And i think maybe i need a GB rom.
and i download XXLA4 everything is good and when i try root XXLA4.
this file: 'CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5'' stock phone.
Every time i install this way.
Wipe Data/Factory Reset
Wipe Cache Partition
Format/cache
Format/system
Format/data
Wipe Dalvik Cache
Wipe Battery Stats
Fix Permissions
This way always be good for me cuz i try this way 100 times.
I use Odin 1.85 and i use everytime u1_02_20110310_emmc_EXT4.pit (NO-RE-PARTITION)
So i think my fault is mistakenly last time i select ''N7000_16GB_Q1_20110914-stock.pit'' instal a ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''

I'm tired for try.
I try another pc but result is the same. FAIL FAIL FAIL
N7000XXLA4_N7000OJVKL1_N7000XXLA4_HOME.tar
N7000XXLRL_N7000XXLRK_N7000VD2LR1_HOME.tar
N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar
N7000XXLRT_N7000DBTLRT_N7000XXLRK_HOME.tar
N7000XXLRI_N7000OJVLR3_N7000XXLRB_HOME.tar
I'm like a sammy's storage... I try this roms but result is the same.
Where did i wrong? problem is kernel?rom?pit file? ((

where did it fail?

nokiamodeln91 said:
where did it fail?
Click to expand...
Click to collapse
Odin Fail. I think factoryfs.img fail...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Why now is the wrong? Thing I did always right way

Done dude.. u r good to go now

Problem is solved
Thank you so much ''nokiamodeln91''

dont do any wipes as of now.. u on ICS and an unsafe kernel
dont forget the thanks button

How did you rectify this nokiamodeln91?
Sent from my GT-N7000 using xda premium

OP used an incorrect file with the PIT16GB file.. i just corrected the mistake

nokiamodeln91 said:
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
Click to expand...
Click to collapse
Nice man, well done.
Sent from my GT-N7000 using xda premium

nokiamodeln91 said:
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
Click to expand...
Click to collapse
Where can I get a copy of this PIT file? My phone is bricked and am only able to get into download mode and not recovery mode.

[Q] Galaxy Note doesn't go beyond logo and stuck at Downloading.. PLZ HELP :(

Hello all,
I read now the warning post and I understand now that probably I shouldn't have done it (so please be gentle ).. however maybe someone can still help me with my situation:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA (maybe that was also a mistake?). After it was finished it restarted by itself and now its in the following status:
- stucks at GALAXY NOTE N7000 logo. Sometimes blinks, but never goes beyond it.
- Recovery mode exactly same - stuck at logo.
- when plugging USB it will show the battery, but it's like stuck then.
- Tried download mode, but it's stuck at Downloading... forever.
I couldn't find the exact case as mine, that it restarted by itself and stuck at logo now.
I backed up everything, the previous ROM and etc.
I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
And most importantly, what should I do now? Can I do something via the download mode? I don't think Odin recognizes any connected device when I plug in the USB, but I don't know how to check if it does or not..
Thanks in advance!

Switch to download mode, connect to PC and install a stock JB (be sure to install the USB drivers before).
Make a snapshot of the errors an post it here.

http://forum.xda-developers.com/showthread.php?t=1424997
May be this helps ...
Just flash a new stock rom..
Sent from my GT-N7000 using xda premium

i believe u use wrong kernal so it's stuck ！ if u don't ever do any factory reset or wipes then u're stillsafe ！
if u do so ? then just follow the instructions above given by the 2members here ：p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation ！

Trying
alvinhaw said:
i believe u use wrong kernal so it's stuck ！ if u don't ever do any factory reset or wipes then u're stillsafe ！
if u do so ? then just follow the instructions above given by the 2members here ：p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation ！
Click to expand...
Click to collapse
Trying all that right now, will keep you posted.

what is my stock ROM?
whatever61 said:
Trying all that right now, will keep you posted.
Click to expand...
Click to collapse
I don't understand this.. my stock ROM was:
Baseband Version: N7000XXLB2
Kernel Version: 2.6.35.7-N7000XXLC1-CL1003701 [email protected] #2
Build number: GINGERBREAD.XXLC1
I don't know what coutnry, I bought it from Netherlands, I live in Belgium, but it could be from any country in the region!
I cannot find this one exactly. I find many with N7000XXLB2 and many with N7000XXLC1.
Which one should I choose?
Also, can I install a JB or ICS directly?

Please let me know I'm doing it right (cause this is getting really insanely ridicilous):
1. I install PhilZ recovery mode via the phone recovery mode.
2. I install a stock ROM (I tried many) via Odin download mode.
All the time stuck as Galaxy N7000 logo. Never goes past it.
Every time I install a stock ROM it also removes the Philz recevory mode, but maybe that's ok..
Anything I'm doing wrong??

Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.

ThaiDai said:
Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.
Click to expand...
Click to collapse
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..

whatever61 said:
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..
Click to expand...
Click to collapse
Just let THAIDAI knows which stock rom u're flashing !

alvinhaw said:
Just let THAIDAI knows which stock rom u're flashing !
Click to expand...
Click to collapse
Ok, here we go.
I was trying with ROM: N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5
This is what I got from Odin (I hope that's what you meant by snapshot and not actual screenshot or something ):
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.img
<ID:0/008> NAND Write Start!!
<ID:0/008> zImage
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
This is something new: just after it was completed it booted to recovery mode and gave me the following message:
Android system recovery <3e>
Finding update package
bla bla
Successfuly installed package.
Wiping cache..
Formatting /cache
Cache wipe complete.
E:failed to mount /data (unknown error: 0)
your storage not prepared yete, please use UI menu to format and reboot actions.
copy application failed.
Applying multi-CSC
Can't access to '/system/csc/ATO/system'
Successfully applied multi-CSC.
and it still doesn't boot.. gonna try another ROM now and post here the results.

Now tried with:
N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5
This is the original original ROM that I had when I just bought the phone.3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> factoryfs.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> zImage
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
No going into recovery mode after restart this time and still same problem.

when you flash a stock rom with pc odin, the phone may not boot. If you have flashed a GB rom then when you are stuck at logo enter stock recovery with three button combo and then wipe data factory reset, wipe cache and then reboot.

I flashed a stock rom as explained above, not a GB. I tried wiping cache and all data through recovery. Nothing helps. You say it might not boot, so how do I make it boot with Stock ROM?

stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot

rraaka said:
stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot
Click to expand...
Click to collapse
I already did, the last post was a GB, i tried to wipe out everything afterwards also.

ThaiDai, please see my replies, I did as you requested..
Thanks

whatever61 said:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA ...
....I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
Thanks in advance!
Click to expand...
Click to collapse
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now

it might be mess up.. try get 5files wif bootloader n place it accordingly in odin .
go here to study http://forum.xda-developers.com/showthread.php?t=1424997

shoey63 said:
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now
Click to expand...
Click to collapse
Yep, emmc bricked. Send it to servicecenter, they repaired it for free, for me. Or you can do the workaround http://forum.xda-developers.com/showthread.php?t=1667886 , but i dont would do that, as you will get many freezes maybe. Thats very annoying.
Regards

[Q] PingPong Root -> TWRP -> Brick! :( Help!

TL;DR DON'T try to install a custom recovery yet. As of 5/12/15, the bootloader prevents you from doing that. At the moment, you can only root, which you can do through Ping Pong Root (google it). And if for some reason you goofed up and installed a custom recovery, go to AT&T and just say the bare minimum, that you "tried to update your phone" and it keeps telling you "this error message." If they prod more, you can say you "updated the firmware," but obviously withhold the words "flash," "recovery," etc.
So I greatly REGRET that I installed a custom recovery. I'd appreciate any help. I'm bricked in the "System software not authorized by AT&T has been found on your phone." Here's what I did leading up to it:
1. Installed Ping Pong Root party_beta5.7z. Unzipped, installed, rooted.
2. Root Checker verified root!
3. Determined my my phone is: G920AUCU1AOCE.
4. Downloaded TWRP 2.8.6.2 through Flashify for Samsung Galaxy S6 (zeroflte).
5. Flashed it through Flashify
6. Bricked (light blue screen with text) and bootloop.
Help!
EDIT: Steps I've taken so far:
1. Download Odin Tar files from http://forum.xda-developers.com/att-...g920a-t3103835
2. Connected phone to PC in download mode after installing USB drivers and ODIN 3.10.6
3. Put all 4 tar files into their corresponding spots.
EDIT2: No luck. Tried multiple ports, multiple computers, and used the official cable. Also Ran as administrator. After making sure my device is recognized as COM3 (blue box), and the tar files are plugged in, I keep getting the below error:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT3: Played dumb, took it to at&t store with a tech support center, and they re-flashed a clean install for me. Whew.

I don't think u can use custom recoveries yet buddy..

Yeah, I goofed bigtime. I'm really regretting it.

It's telling me this:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Let it be known root does not equel unlocked bootloader. I'd of wait or am for something like safestra to make it's way over.

aznkenshin said:
I'd appreciate any help. I'm bricked in the "System software not authorized by AT&T has been found on your phone." Here's what I did leading up to it:
1. Installed Ping Pong Root party_beta5.7z. Unzipped, installed, rooted.
2. Root Checker verified root!
3. Determined my my phone is: G920AUCU1AOCE.
4. Downloaded TWRP 2.8.6.2 through Flashify for Samsung Galaxy S6 (zeroflte).
5. Flashed it through Flashify
6. Bricked (light blue screen with text) and bootloop.
Help!
EDIT: Steps I've taken so far:
1. Download Odin Tar files from http://forum.xda-developers.com/att-...g920a-t3103835
2. Connected phone to PC in download mode after installing USB drivers and ODIN 3.10.6
3. Put Firmware into AP.
Praying this will work...
EDIT2: No luck. It tells me "Can't open the serial(COM) port." I'm thinking it's the drivers fault? Looking into it...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2711451
download odin 3.10.6 and just use all the tar files....MINE IS FINALLY ALIVE

plaxy+ said:
Let it be known root does not equel unlocked bootloader. I'd of wait or am for something like safestra to make it's way over.
Click to expand...
Click to collapse
So in the meantime, what should I do to at least have an operable phone? (

skylinegtr116 said:
http://forum.xda-developers.com/showthread.php?t=2711451
download odin 3.10.6 and just use all the tar files....MINE IS FINALLY ALIVE
Click to expand...
Click to collapse
OH! I was only using the "AP_****" files. I should plug in the CSC, CP, and BL too???????

aznkenshin said:
oh! I was only using the "ap_****" files. I should plug in the csc, cp, and bl too???????
Click to expand...
Click to collapse
yes all the files

skylinegtr116 said:
yes all the files
Click to expand...
Click to collapse
No luck
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G920AATT1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

The link above is broken, where can I get these files?
PS: Why do they provide a custom recovery if it straight "bricks" your phone? How is that even considered a working release and why don't they (TWRP) post a damn warning about it?

plaxy+ said:
Let it be known root does not equel unlocked bootloader.
Click to expand...
Click to collapse
Just joined last month, this was their third post currently, and knew this :good:
OP joined late 2011 and thought that just by gaining root, we could install custom recoveries on a still locked bootloader...........
LEARN FROM THIS, people! Don't want to go through this? Follow instructions!
That being said, from what I know of soft bricks, you are doing the right steps to fix it, I just don't have any experience with them to be able to tell you what you're doing wrong. People who have unlocked bootloader phones and installed custom recoveries, tripping KNOX, were able to flash back to stock and get KNOX back to 0x0, but again, they have the unlocked bootloader to be able to do that.... don't know what else to tell you other than to bring it to an ATT service center, play dumb, and see if they'll swap you into a new one
hayateyoshida said:
The link above is broken, where can I get these files?
PS: Why do they provide a custom recovery if it straight "bricks" your phone? How is that even considered a working release and why don't they (TWRP) post a damn warning about it?
Click to expand...
Click to collapse
They do post a warning about it - they post what phones this IS for, and our phone is NOT listed! People, please learn how to read if you're going to screw around with your phones! You can't just say "I have an S6 Edge" and think they're all the same! TWRP clearly states the following two devices have recoveries available:
Samsung Galaxy S6 (zeroflte)
Samsung Galaxy S6 (Sprint) (zerofltespr)
Do you see zeroflteatt on that list? Do you think zeroflte = zeroflteatt? If you don't know what model phone you have and flash away, you're gonna have a bad day......

aznkenshin said:
So I greatly REGRET that I installed a custom recovery. I'd appreciate any help. I'm bricked in the "System software not authorized by AT&T has been found on your phone." Here's what I did leading up to it:
1. Installed Ping Pong Root party_beta5.7z. Unzipped, installed, rooted.
2. Root Checker verified root!
)
Click to expand...
Click to collapse
what??
ATT galaxy s6 has root ?

Have you tried recovery through smart switch
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app

netnerd said:
what??
ATT galaxy s6 has root ?
Click to expand...
Click to collapse
yep. pingpong root

LeKtRiCzzz said:
Have you tried recovery through smart switch
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app
Click to expand...
Click to collapse
Yes, after going to update and software emergency setup, I plugged in Model and Serial number on the sticker of my phone, and it auto-closes.
Sent from my GT-I9505G using XDA Free mobile app

Agree 500%
KryptosXLayer2 said:
Just joined last month, this was their third post currently, and knew this :good:
OP joined late 2011 and thought that just by gaining root, we could install custom recoveries on a still locked bootloader...........
LEARN FROM THIS, people! Don't want to go through this? Follow instructions!
That being said, from what I know of soft bricks, you are doing the right steps to fix it, I just don't have any experience with them to be able to tell you what you're doing wrong. People who have unlocked bootloader phones and installed custom recoveries, tripping KNOX, were able to flash back to stock and get KNOX back to 0x0, but again, they have the unlocked bootloader to be able to do that.... don't know what else to tell you other than to bring it to an ATT service center, play dumb, and see if they'll swap you into a new one
They do post a warning about it - they post what phones this IS for, and our phone is NOT listed! People, please learn how to read if you're going to screw around with your phones! You can't just say "I have an S6 Edge" and think they're all the same! TWRP clearly states the following two devices have recoveries available:
Samsung Galaxy S6 (zeroflte)
Samsung Galaxy S6 (Sprint) (zerofltespr)
Do you see zeroflteatt on that list? Do you think zeroflte = zeroflteatt? If you don't know what model phone you have and flash away, you're gonna have a bad day......
Click to expand...
Click to collapse
---------- Post added at 11:25 AM ---------- Previous post was at 11:24 AM ----------
Smart Switch does NOT work in the AT&T version of the S6.
LeKtRiCzzz said:
Have you tried recovery through smart switch
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app
Click to expand...
Click to collapse

aznkenshin said:
EDIT3: Played dumb, took it to at&t store with a tech support center, and they re-flashed a clean install for me. Whew.
Click to expand...
Click to collapse
Great, I have just booked an appointment. But buddy, is it possible for you to upload Odin Tar?
Thanks!

nagnrik said:
Great, I have just booked an appointment. But buddy, is it possible for you to upload Odin Tar?
Thanks!
Click to expand...
Click to collapse
Read my OP

aznkenshin said:
Read my OP
Click to expand...
Click to collapse
ATT re-flashed the firmware, it is fine now. Thanks!

tab s2 wont work after attempted root..

Hey, so i tried rooting my galaxy tab s2 810, i tried flashing a custom kernel, and then used an autoroot. it didn't seem like it was working, and now im afraid that i have gotten myself in more trouble that i thought was possible.. when i try to boot my device it stays on the boot screen saying either '' Kernel is not seandroid enforcing'' or ''recovery is not seandroid enforcing''. i cannot enter the recovery menu by pressing Power+home+vol up.
however i can enter the download section...
i have tried a bunc of different fixes, and i dont know if all i did was make my problem worse... i could really use some help.

Try flashing the newest stock ROM over ODIN 5.1.1_XAC-T810XXU2BOJ1-20151102191344.zip
And start over from the beginning, take the right files ( android 5.1.1)

I've tried but it wont flash it for some reason it keeps failing

At which step exactly? What ist the output in ODIN?
Gesendet von meinem Nexus 5X mit Tapatalk

<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

No need to create 3 threads on the same subject.
http://forum.xda-developers.com/showpost.php?p=64748665&postcount=98
Which android version was your tablet running and what region is it from?

I think u are trying to downgrade your bootloader. Do you really have the latest Stock rom ? Take the one i posted above.
Gesendet von meinem Nexus 5X mit Tapatalk

ashyx said:
No need to create 3 threads on the same subject.
http://forum.xda-developers.com/showpost.php?p=64748665&postcount=98
Which android version was your tablet running and what region is it from?
Click to expand...
Click to collapse
woops, got kind of desperate there.. its 5.1.1 and i bought it in the US

ashyx said:
No need to create 3 threads on the same subject.
http://forum.xda-developers.com/showpost.php?p=64748665&postcount=98
Which android version was your tablet running and what region is it from?
Click to expand...
Click to collapse
I have also flashed the twrp with succes. i could get into the custom recovery, so i tried to wipe it from there and nothing happened.... when i try to boot my device from twrc is says ''no os installed''
no stock ROM that i have tried has been able to flash

jever55 said:
I have also flashed the twrp with succes. i could get into the custom recovery, so i tried to wipe it from there and nothing happened.... when i try to boot my device from twrc is says ''no os installed''
no stock ROM that i have tried has been able to flash
Click to expand...
Click to collapse
OK so your half way there.
Did you try flashing the rom westernmg posted? That is the one you should be flashing.
Also quit with the random wiping before you go making things worse. Wipe is rarely needed except for the data partition.
If that doesn't work there is a custom rom by BigBot96 for the t810 in the development section. Flash that with twrp and you should be up and running again.

ashyx said:
OK so your half way there.
Did you try flashing the rom westernmg posted? That is the one you should be flashing.
If that doesn't work there is a custom rom for the t810 in the development section. Flash that with twrp and you should be up and running again.
Click to expand...
Click to collapse
i have tried the ROM he posted but with no succes... im not quite sure how to flash anything with twrp

jever55 said:
i have tried the ROM he posted but with no succes... im not quite sure how to flash anything with twrp
Click to expand...
Click to collapse
Read the post or Google.

ashyx said:
Read the post or Google.
Click to expand...
Click to collapse
thank you, but he wants me to flash a firmware package over ODIN, in order too do the flash via Twrp right ? i have attempted that flash and failed...

Maybe you have killed your OS while wiping it in TWRP and not flashing a new system.
Thats why i told you to flash a fresh stock ROM with ODIN.
You can also try flashing CM12.1 over TWRP...

jever55 said:
thank you, but he wants me to flash a firmware package over ODIN, in order too do the flash via Twrp right ? i have attempted that flash and failed...
Click to expand...
Click to collapse
What do you mean you've flashed with TWRP, what did you flash?