Database Develop

How to flash baseband??

Some tattoo have baseband version 13.29.55.13G_3.35.07.20 and it doesn't support 3G, whereas tattoos with baseband version 13.29.55.13H_3.35.07.20 does.
Is there any option to flash this baseband of 3G to non-3G tattoos??
Thanks

Yes, use an update.zip. I'll add it as an option in my MCR kitchen.
P

paulobrien said:
Yes, use an update.zip. I'll add it as an option in my MCR kitchen.
P
Click to expand...
Click to collapse
So will you bring out a rom with the ability to change the baseband version ?
Shyam

shyamk said:
So will you bring out a rom with the ability to change the baseband version ?
Shyam
Click to expand...
Click to collapse
yes he said no... patience shyam.... hope for the earliest release of this new ROM with this option....
keep it up paul...

shyamk said:
So will you bring out a rom with the ability to change the baseband version ?
Shyam
Click to expand...
Click to collapse
@ shyam, did you find out anything more positive towards changing the baseband firmware of tattoo ??? even i am as curious a s u r.... please dont mistake me for those words which i said to u to calm down.... ok ???
i hope many european tattoo owners who have a baseband version of 3G could help us right ??? i dont know how to ask them to extract baseband firmware & upload it here.... do u have any idea about that ???

I hope there is some progress............

here u go thacen.... rename it as update.zip & reboot into recovery mode, then apply update.zip from sdcard.... simple.
here is the link posted by paul... the hard working guy. credit should go to him
i am just posting the download link.... for ur convenience.....
http://kitchen.romraid.com/paul/tattoo/update-tattoo-radio-13.29.55.13H_3.35.07.20-signed.zip

So can someone confirm that with the paulobrien's update, could you get the 3g support working?
Update very much appreciated.

harry7 said:
So can someone confirm that with the paulobrien's update, could you get the 3g support working?
Update very much appreciated.
Click to expand...
Click to collapse
no its not possible... somehow that baseband has got nothing to do with the 3G hardware... only if u change the spl, then i think we stand a very good chance of getting 3G functionality in tattoo....
noone cared to post us the spl which could give us the 3G functionality.... waiting for someone who can do it.... baseband has got nothing to do with 3G. SPL is must for 3G function....

My advice is don't flash it on non-3G Tattoo. because I've had flashed on mine and it's bricked after that. my phone is now at HTC Care and hopefully they'll repair it.

3DPRO said:
My advice is don't flash it on non-3G Tattoo. because I've had flashed on mine and it's bricked after that. my phone is now at HTC Care and hopefully they'll repair it.
Click to expand...
Click to collapse
It is no problem to try..many had tried.. i also tried without bricking, only thing is this could not success changing the base-band version at this time.
I think... in your case, you had removed the battery in the middle of flashing.. that is the problem. This base-band flashing actually require rebooting to continue flashing but you had removed the battery instead... plz be careful next time...plz read all the instructions properly and whole thread before actually jump into...
anyway till now this one is not working... so we need to wait for a working version.

thacen said:
It is no problem to try..many had tried.. i also tried without bricking, only thing is this could not success changing the base-band version at this time.
I think... in your case, you had removed the battery in the middle of flashing.. that is the problem. This base-band flashing actually require rebooting to continue flashing but you had removed the battery instead... plz be careful next time...plz read all the instructions properly and whole thread before actually jump into...
anyway till now this one is not working... so we need to wait for a working version.
Click to expand...
Click to collapse
the flashing was successfully until i restart the phone though. I wasn't pull out the battery between the flashing.

[ROM] 25 Mar: NVflash stock ROM release: v10b dated 1300166062 (15/03/2011)

I'm please to make the latest (*at time of writing) LG 2X ROM release available for your use in NVFlash format. This is doubly useful as it provides us with a great 'disaster recovery' solution for when we're playing with new ROMs, recoveries etc.
Please note that you use this at your own risk!
NVFlash is for use on Windows PCs.
Excellent details on how to set up NVFlash are available in this topic (thanks jmcnz), but in a nutshell the process is:
Download the ROM file below
Download the driver file below
Turn device off, remove battery, plug device in while holding volume up and down - screen will stay black but Windows will add a new 'APX' devices
Install drivers extracted from driver file download
Run 'flash.bat' from ROM file download
Wait for flash to complete and device to reboot
The all important files...
NvFlash ROM v10b / 1300166062 (15/03/2011) - DOWNLOAD (ROMraid Load Balancing) - MD5: b17cb7fd3542b5d02baf49879a83acff
NvFlash drivers - DOWNLOAD (ROMraid Load Balancing) - MD5: 2eab4f16fe1337a209a550ccd0be69c2
Enjoy!
P

Amazing work Poul, cant wait to do this update..thumbs up and keep up the good work

Thank you for your hard work, Paul!
Btw, is there a changelog between the V10a, V10b and V10c versions?

No changelog unfortunately!
P

Thanks for your work on this!
I'm pretty new at this but this means when we brick the phone we can put back the orginal rom from LG to fix any problems that may occur?
I currently have version 10a on my LG (bought it on 7th of march) so the 10c would be a newer version or am i seeing this the wrong way?

Korumera said:
Thanks for your work on this!
I'm pretty new at this but this means when we brick the phone we can put back the orginal rom from LG to fix any problems that may occur?
I currently have version 10a on my LG (bought it on 7th of march) so the 10c would be a newer version or am i seeing this the wrong way?
Click to expand...
Click to collapse
Correct on both counts.
P

stupid question maybe but does this include CWM?

[email protected] said:
stupid question maybe but does this include CWM?
Click to expand...
Click to collapse
Dont think so, this is a vanilla version of the orginal ROM which was shipped on the Optimus mode. We'll have to wait a bit longer for the CWM

Korumera said:
Dont think so, this is a vanilla version of the orginal ROM which was shipped on the Optimus mode. We'll have to wait a bit longer for the CWM
Click to expand...
Click to collapse
ok so no stupid LG programs are included?

Well i think it includes those tho. I ment vanilla as in this is the ROM we have on our phones right now when we unpacked it

Korumera said:
Well i think it includes those tho. I ment vanilla as in this is the ROM we have on our phones right now when we unpacked it
Click to expand...
Click to collapse
Yes, but probably newer.
Check the date in the build.prop to be sure.
P

First of all, great work paulobrien!
Question is.. what's new in this release if you have 10a, is there a point in doing an update?

I'm guessing it'll wipe everything if I update through NVflash? In that case i'll wait for CWM and some other goodies first.

I thought the different versions indicated which area they where fore.
V10A for scandinavia etc.
V10C for other european contries and so on.
Dunno if that is the right categorisation, but just an example. Will try and find link

larsn84 said:
I thought the different versions indicated which area they where fore.
V10A for scandinavia etc.
V10C for other european contries and so on.
Dunno if that is the right categorisation, but just an example. Will try and find link
Click to expand...
Click to collapse
Hmmm would be strange, i'm from holland and i have a Optimus with version 10a but it's possible we are sided with them (small country afterall).

V10A in italy too

V10m in Korea.
The preinstalled ROM is not good, sometime FC when i access dial pad.

hi im korean user
very interested in your work and so happy
in korea there are so many people wait your rom so do i
im very sorry but could you build
some ver.korea rom?!
i mean it would work in su660
that released in korea like p990
i wait for your answer
...im really sorry
im not good at english but i hope you to understand what i mean
Sent from my LG-SU660 using XDA App
Sent from my LG-SU660 using XDA App

GJ keep up the good work, now I am rly getting curious why everyone is so excited about custom roms ;D

Should the phone be on and plugged in the USB when i install the rom? im a total noob at this... i have suceeded in installing the drivers... but i dont understand how to do with the rom installation...
Thanks for a great job, Paul!
Best regards

LG P990H Firmware

hello, looks like something out of this device in America that should be equal to our 2x, the device is unlocked GSM 850 / 900 / 1800 / 1900, someone has an IMEI to download the firmware? I'm curious to know that baseband, the firmware should be our v10c called V10a, this is the source:
http://www.lg.com/global/support/opensource/opensource-detail.jsp Search for P990H.

Some of it's kernel source has made it into CM7, so hopefully that's a sign that it's compatible.
Hopefully.

Rusty! said:
Some of it's kernel source has made it into CM7, so hopefully that's a sign that it's compatible.
Hopefully.
Click to expand...
Click to collapse
If the source for the P990H is similar to the latest 0622 update that might mean the kernel sources for that would be available and the FR19 could get more kernel tweaks. I will alert Paul.

i have a p990h, and i asked in the general thread if someone knows about baseband, if i can flash any rom, and the baseband will continue working perfectly, i had a xperia x10a, but on that phone when they updated to 2.1 SE unified basebands, so you can flash a x10a and x10i with the same rom and the phone doesnt change, just changed the firmware you had , but i really dont know about this phone, and i change to the optimus 2x because i brick mi x10a with a custom rom...

Kuronow said:
i have a p990h, and i asked in the general thread if someone knows about baseband, if i can flash any rom, and the baseband will continue working perfectly, i had a xperia x10a, but on that phone when they updated to 2.1 SE unified basebands, so you can flash a x10a and x10i with the same rom and the phone doesnt change, just changed the firmware you had , but i really dont know about this phone, and i change to the optimus 2x because i brick mi x10a with a custom rom...
Click to expand...
Click to collapse
OT: Wow, you actually bricked a Xperia. Thats awesome, may i ask how?
Sent from my LG Optimus 2x using XDA Premium App

Need to see if it's partition layout is the same or not, really.

Kuronow said:
i have a p990h, and i asked in the general thread if someone knows about baseband, if i can flash any rom, and the baseband will continue working perfectly, i had a xperia x10a, but on that phone when they updated to 2.1 SE unified basebands, so you can flash a x10a and x10i with the same rom and the phone doesnt change, just changed the firmware you had , but i really dont know about this phone, and i change to the optimus 2x because i brick mi x10a with a custom rom...
Click to expand...
Click to collapse
http://csmg.lgmobile.com:9002/csmg/...00000000000&model=LGP990h&country=NL&region=U
Write your IMEI in a 000, maybe you can find the firmware.
PS: what's your number of baseband?

Rusty! said:
Some of it's kernel source has made it into CM7, so hopefully that's a sign that it's compatible.
Hopefully.
Click to expand...
Click to collapse
I stumbled upon while looking for something else entirely. Some things in the code stand out, like.
Code:
1. unsigned int u32register = 0 ;
2. u32register = readl(IO_ADDRESS(0x6000d1b8));
3. if(((u32register>>5)&0x00000001))
Line 1 has a complete unnecessary initialization of the variable, since it's re-initialized in line 2, and...
3. To test if bit 6 is set, they shift the result to the right by 5 and and the result with 1, instead of just directly anding with the appropriate bit. Again, a completely unnessecary operation. They could even write it like this, if clarity is what they're after.
if (u32register & (1 << 5))
as this shift-operation would be resolved at compile-time, not runtime.
Then there's the usual favorite:
Code:
#if 1
... (do stuff)
#endif
...a little farther down in the code.
Very minor stuff, I know, but doesn't exactly instill a sense of quality.
::Trym

TrymHansen said:
I stumbled upon while looking for something else entirely. Some things in the code stand out, like.
Code:
1. unsigned int u32register = 0 ;
2. u32register = readl(IO_ADDRESS(0x6000d1b8));
3. if(((u32register>>5)&0x00000001))
Line 1 has a complete unnecessary initialization of the variable, since it's re-initialized in line 2, and...
3. To test if bit 6 is set, they shift the result to the right by 5 and and the result with 1, instead of just directly anding with the appropriate bit. Again, a completely unnessecary operation. They could even write it like this, if clarity is what they're after.
if (u32register & (1 << 5))
as this shift-operation would be resolved at compile-time, not runtime.
Then there's the usual favorite:
Code:
#if 1
... (do stuff)
#endif
...a little farther down in the code.
Very minor stuff, I know, but doesn't exactly instill a sense of quality.
::Trym
Click to expand...
Click to collapse
I suggest you stop looking at the source code because when I did the same it made me feel dirty using the phone LG has some dumb **** programmers that's for sure.

easy for find firmware LGP990H but at final, it's .kdz grrr
I can have all firmware LGP990H
(information, i am french)

Hell_97 said:
http://csmg.lgmobile.com:9002/csmg/...00000000000&model=LGP990h&country=NL&region=U
Write your IMEI in a 000, maybe you can find the firmware.
PS: what's your number of baseband?
Click to expand...
Click to collapse
My baseband is 1035.21_20110602, that's my current baseband, how i write my IMEI in a 000 ? i dont know what u mind
HerrKuk said:
OT: Wow, you actually bricked a Xperia. Thats awesome, may i ask how?
Sent from my LG Optimus 2x using XDA Premium App
Click to expand...
Click to collapse
I was testing CM6 Froyo for the x10a, and instaled beautiful widgets, used the on/off widget for brightness pressed once, go to 100%, press again, paf, phone turn off, after that i repaired my phone, installed original FW, but my phone never stopped rebooting when i used apps, tried to use gtalk, i just can use gtlak, after a few times trying to repair it, now it never turns on xD... and now i have a O2X

How i can get these firmeware
Im from germany
Sent from my LG-P990 using XDA Premium App

maybe i can extract the FW + baseband + RIL if someone toldme how :3

Kuronow said:
how i write my IMEI in a 000 ? i dont know what u mind
Click to expand...
Click to collapse
What he meant was, you replace the zeros in the link with your own IMEI number, then you'll get a list with avalible FWs for your phone. And, don't use IE, won't work. And then report your findings here!
Edit: Replace zeros with IEMI, Country and region can be found here: http://csmg.lgmobile.com:9002/csmg/b2c/client/ftp_country_info.jsp but if you're from chile like your profile says I've fixed that in this link: http://csmg.lgmobile.com:9002/csmg/...00000000000&model=LGP990h&country=CL&region=S just you replace the zeros. And if it's not working, try remove the H from the model name in the link. Just an idea.

ok, ill doit in a bit, im working, and need to use a proxy to see that page =/, and then i tell you about :3

Kuronow said:
ok, ill doit in a bit, im working, and need to use a proxy to see that page =/, and then i tell you about :3
Click to expand...
Click to collapse
Nice! And yes, the FW and ril you could extract, but the link will give us those things anyway. The baseband cant be extracted I think, not easily atleast. But that's probably incompatible anyway, so if you'll want to enjoy custom roms later, then you probably need to save the RIL from original FW and paste in the one you're changing to. And ofc, baseband you can't change. But I'm just guessing now, so don't take my word for it. Time will tell if we can DL the FW later.

LGP990H AENTDW 105KPTM002281 20110518 V10A_02.01 http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP990H/AENTDW/V10a_02.01/V10A_02.01.kdz http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP990H/AENTDW/V10a_02.01/V10A_02.01.kdz GLOBAL/GLOBAL N N EI GSM
Now what can i do with this?

Hey guys do you know how to download that firmware i found, i just see an encrypted web page... , can someone tell me what to do with that info?

Clicking on the links above works fine for me.

u.u it didn't work for me at all , can you upload this firmwares to the original P990 firmwares page, they both are for Latino America - Chile, probably will work on all america this FW, just in case someone needs them.
Thank you in advice

Eaglesblood ROM issue!

i'm using a LG O2X, installed the EAGLESBLOOD™ Ice Cream Sandwich AOSP [4.0.4] build #4 and r having a few problems! i'm having problem with a lot of dropped calls, inconsistent data (a few minutes on, a lot more minutes off), both cellular and wifi & there's some options in settings that will crashed such as developers option! even when i'm connected to the the my cellular data, the download speed is abysmal! i was using MIUI previously and i can get 2Mbps+ connection easily through my cellular but now, even a 900kbps download will take ages, not to mention a lot of unsuccessful downloads!
i've nvflashed my phone back to stock rom before flashing my phone. is there any solution to this?
thanks in advance!

help?
teddy_kkk said:
i'm using a LG O2X, installed the EAGLESBLOOD™ Ice Cream Sandwich AOSP [4.0.4] build #4 and r having a few problems! i'm having problem with a lot of dropped calls, inconsistent data (a few minutes on, a lot more minutes off), both cellular and wifi & there's some options in settings that will crashed such as developers option! even when i'm connected to the the my cellular data, the download speed is abysmal! i was using MIUI previously and i can get 2Mbps+ connection easily through my cellular but now, even a 900kbps download will take ages, not to mention a lot of unsuccessful downloads!
i've nvflashed my phone back to stock rom before flashing my phone. is there any solution to this?
thanks in advance!
Click to expand...
Click to collapse
anyone who can help me?!?!

Hi
I cannot help, but maybe you can help me
I would like to try that rom myself but I saw lot's of people have issue with it and all mainly related to the baseband used.
Mine is currently 1035.21_20110725 and I am running CM9 skang3 (I know it's pretty old) ...
so if your tell me your BB, I'll know that I don't need to try that rom under this BB :good:
Also it's bad we need 10 post before being able to post in a dev forum, so at least it will help us reach the goal !
cu

same!
bananias said:
Hi
I cannot help, but maybe you can help me
I would like to try that rom myself but I saw lot's of people have issue with it and all mainly related to the baseband used.
Mine is currently 1035.21_20110725 and I am running CM9 skang3 (I know it's pretty old) ...
so if your tell me your BB, I'll know that I don't need to try that rom under this BB :good:
Also it's bad we need 10 post before being able to post in a dev forum, so at least it will help us reach the goal !
cu
Click to expand...
Click to collapse
my baseband is the same as urs.... so u can try others now! well, i may go Nova HD in a few days time if no1 can help me.... i actually even pmed the EB developer but no reply yet.
lolz, i do think that the 10 post is actually a bit pointless as if i want to get to 10 posts faster, i'll just bump my own thread though i dont intend to do so! and i'm still far away from the #10 target! ^_^

changing baseband!
just wondering, if i flash another baseband via SmartFlash P990, will it help or will it render the ROM unusable? anyone can help me with this query?

Don't think you'll break anything by flashing your BB, I did it 2 times already, but of course if you put a BB not compatible with the rom you use your phone will not boot, you'll have to flash a new rom via CWM ... so at least put some rom files ready on your sd card

bananias said:
Don't think you'll break anything by flashing your BB, I did it 2 times already, but of course if you put a BB not compatible with the rom you use your phone will not boot, you'll have to flash a new rom via CWM ... so at least put some rom files ready on your sd card
Click to expand...
Click to collapse
just to check, can anyone tell me the best baseband for EaglesBlood AOSP 4.0.4 Build #4? and the link to how to flash? thanks!

2 more posts to go! ^_^ after this, then 1!

teddy_kkk said:
just to check, can anyone tell me the best baseband for EaglesBlood AOSP 4.0.4 Build #4? and the link to how to flash? thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1699066

Rutifruti said:
http://forum.xda-developers.com/showthread.php?t=1699066
Click to expand...
Click to collapse
i know of the main thread but i read until page 6. so just checking is there any direct links which can teach me how to flash the best baseband for EB 4.0.4!

teddy_kkk said:
i know of the main thread but i read until page 6. so just checking is there any direct links which can teach me how to flash the best baseband for EB 4.0.4!
Click to expand...
Click to collapse
Smartflash, nvflash or through flashing in kdz format
Sent from my Optimus 2X using xda premium

[Q] Rooting and upgrading to Jelly Bean

Hello,
I'm sorry if this question has been asked before, I am not good at this and very nervous of doing something wrong and destroying my mobile... If you could please help me?!
My Galaxy S is:
Frimware version
2.3.3
Baseband version
I9000BWJV2
Kernel version
2.6.35.7-I9000XWJVH-CL184813*[email protected]*#2
Build nr
Gingerbread.xwjvh
The mobile is very very slow and very difficult to use because of this. I have seen that I can root the mobile and upgrade it to Jelly Bean, and hopefully my problems will be resolved...
I am just not sure what kind of programme I should download to root it... also I'm very nervous about in what steps I need to go about to upgrading to Jelly Bean and what I need to download and in what order to do this.
I'm not sure what I download to my laptop's desktop and what I need on my mobile itself...
If you could help me with a step by step guide I would be eternally grateful.
Many Many Thanks
Wishing you all Happy Holidays.
Kaarina

Did you even search?
http://forum.xda-developers.com/showthread.php?t=1852546
Sent from my GT-I9000

amerkiller1995 said:
Did you even search?
http://forum.xda-developers.com/showthread.php?t=1852546
Sent from my GT-I9000
Click to expand...
Click to collapse
Hi I did search, but didn't find what you just sent me, just other threads that didn't seem to fit what I wanted to do.
Sorry for bothering you, I can only say I never done anything like this before, and am not skilled at this. Being an older person, I can't believe I'm even going try this on my own...
Many Thanks and wish me good luck.
Kaarina

Kaarina said:
Hi I did search, but didn't find what you just sent me, just other threads that didn't seem to fit what I wanted to do.
Sorry for bothering you, I can only say I never done anything like this before, and am not skilled at this. Being an older person, I can't believe I'm even going try this on my own...
Many Thanks and wish me good luck.
Kaarina
Click to expand...
Click to collapse
there is nothing to worry just watch the video that i have posted below and you will be confident to do it
http://www.youtube.com/watch?v=llsq931ZNWQ

HELP!!!!!
I've done everything and am now updating to ice cream sandwich (thought I do this before I go to jelly bean)
I moved the two last programmes to my mobile, but now when I am about to select 11. Select cm-9.0.0-galaxysmtd.zip only gapps-ics-20120429-signed.zip is showing!!!
What do I do, the other zip must have not been copied to my mobile, can I turn it off and try to put it on again or what do I do!!!!
I hope you can help me or I don't know what to do.... what do I do help.
Many thanks!!!

Is it normal for it to take over an hour for this??
Solved the problem with some thinking and restored the settings and re-did things and now the ROM is installing... so I think it is all going well!
I have beeen waiting for Select cm-9.0.0-galaxysmtd.zip this to finish, and it has been going on for an hour now, is this normal??
Thanks.

is not normal try redownloading the rom and try again to flash it... are you sure you have the i9000 and not i9000B ?

Flash?
Hi Thanks for replying,
I will try to take out the battery and redo it all.. I think that is what you mean?
I do have a i9000 definitely.
I will try to re do this stepp.... not good with this never done this before, I'm just trying to follow the thread on how to...
Thanks

problems...
UPDATE:
Well I tried to just re do the last step that didn't work, now I am try to that flash, which I now read was the first bit I did, I get a lot of yellow and red text that says:
--Coyping media files...
E:failded to mount /dbdata (File exists)
E:copy_dbdata_media: Can't mount /dbdata
your storage not prepared yet. please use UI menu for format and reboot actions.
Media files copy failed.
#MANUAL MODE#
---Applying Multi -CSC...
Installing Mult-CSC
Applied the CSC-code 'KOR'.
Successfully applied multi-CSC.
---Wiping data....
Formating /data...
Formating /dbdata...
E:format_volume: rfs format failed on /dev/block/st110
Deleting Meta Data
formating /cache
Data wipe complete.
I will try to flash it with odin and the JW4_JW4_JW4.tar and see if that will help anything... not really sure what I am doing ... sigh
Any help is gratefully received...

I guess the worst has now happened
Well I guess that is it with the mobile now...
I am getting that FEARED mobile ! computer icon this time... so I guess it is now completely caput???

Kaarina said:
Well I guess that is it with the mobile now...
I am getting that FEARED mobile ! computer icon this time... so I guess it is now completely caput???
Click to expand...
Click to collapse
Bricking an i9000 is rare, unless you flash firmware for a different phone or pull the cable halfway.
http://forum.xda-developers.com/showthread.php?t=1841250
Sent from my GT-I9000

Well I just did what it said on the thread i was pointed at, and maybe I downloaded the wrong stuff for it... I do not understand what I am doing so i should probably not have done this on my own in the first place, so I don't really have anyone to blame but myself, it is only 3 months left on the contract.....

Kaarina said:
Well I just did what it said on the thread i was pointed at, and maybe I downloaded the wrong stuff for it... I do not understand what I am doing so i should probably not have done this on my own in the first place, so I don't really have anyone to blame but myself, it is only 3 months left on the contract.....
Click to expand...
Click to collapse
Basically what you're doing is flashing the newest GB firmware for your phone using Odin and then rooting it, also using Odin. After that you have access to " recovery mode", from which you simply choose a zip file with your ICS or JB ROM and flash it.
If your phone is normally working now, I suggest you retry. This process is fairly simple, given you follow all the steps.
Edit: wait, looks like you have a Brazilian i9000.
Since you're using a Brazilian I9000B, disregard what i wrote above, most ROMs aren't compatible, read this
http://forum.xda-developers.com/showthread.php?t=1832916
This is also useful
http://forum.xda-developers.com/showthread.php?t=919219
Sent from my GT-I9000

amerkiller1995 said:
Basically what you're doing is flashing the newest GB firmware for your phone using Odin and then rooting it, also using Odin. After that you have access to " recovery mode", from which you simply choose a zip file with your ICS or JB ROM and flash it.
If your phone is normally working now, I suggest you retry. This process is fairly simple, given you follow all the steps.
Edit: wait, looks like you have a Brazilian i9000.
Since you're using a Brazilian I9000B, disregard what i wrote above, most ROMs aren't compatible, read this
http://forum.xda-developers.com/showthread.php?t=1832916
This is also useful
http://forum.xda-developers.com/showthread.php?t=919219
Sent from my GT-I9000
Click to expand...
Click to collapse
I just tried the mobile and got it to Download mode.... my moblie is:
Frimware version
2.3.3
Baseband version
I9000BWJV2
Kernel version
2.6.35.7-I9000XWJVH-CL184813*[email protected]*#2
Build nr
Gingerbread.xwjvh
could you look at that and let me know what I could do to save my moblie??
ps. is it OK to take the battery out when it is in download mode without doing any more damage?
I cannot download anything more at the moment, since I have gone over my data of 1GBI just have a dongle
I can download some via wifi don't have it at home...
I'm waiting for your reply
Many Thanks

Kaarina said:
I just tried the mobile and got it to Download mode.... my moblie is:
Frimware version
2.3.3
Baseband version
I9000BWJV2
Kernel version
2.6.35.7-I9000XWJVH-CL184813*[email protected]*#2
Build nr
Gingerbread.xwjvh
could you look at that and let me know what I could do to save my moblie??
I'm waiting for your reply
Many Thanks
Click to expand...
Click to collapse
Flash the firmware for your phone
http://www.sammobile.com/firmware/?page=3&model=GT-I9000B&pcode=0&os=1&type=1#firmware
Sent from my GT-I9000

amerkiller1995 said:
Flash the firmware for your phone
http://www.sammobile.com/firmware/?page=3&model=GT-I9000B&pcode=0&os=1&type=1#firmware
Sent from my GT-I9000
Click to expand...
Click to collapse
Baseband version
I9000BWJV2 <--- there isn't one exactly the same as mine, I don't know which one to chose...
UPDATE:
I went to that page to see if I could ask for the right one for my mobile and ended up on a page that say :
Announcement:
For safety reasons Sammobile has stopped ALL Samsung Series firmwares (for example: S-series: S5260, M-series: M610 and E-series: E1230) untill further notice! Plz do NOT post any request or start any thread asking where to find Samsung Series on Sammobile's firmware section!
TIA
Zoomy - Moderator
I am not sure if this is anything to do with what I am looking for??
thanks for your patience!!

Kaarina said:
Baseband version
I9000BWJV2 <--- there isn't one exactly the same as mine, I don't know which one to chose...
Click to expand...
Click to collapse
If your build number is the same then it should work.
Sent from my GT-I9000

amerkiller1995 said:
If your build number is the same then it should work.
Sent from my GT-I9000
Click to expand...
Click to collapse
Sorry none of the ones on that page is the same of what I have...

Kaarina said:
Sorry none of the ones on that page is the same of what I have...
Click to expand...
Click to collapse
Who is your operator? You can choose based on them
Edit: is this any help
http://brasildroid.com.br/galaxy-s-i9000b-geral/
Sent from my GT-I9000

amerkiller1995 said:
Who is your operator? You can choose based on them
Edit: is this any help
http://brasildroid.com.br/galaxy-s-i9000b-geral/
Sent from my GT-I9000
Click to expand...
Click to collapse
I live in the UK I'm a bit surprised that I have an Brazilian i9000... I can't read Brazilian
Operating system is Google
on that page http://www.sammobile.com/firmware/?page=3&model=GT-I9000B&pcode=0&os=1&type=1#firmware can I use anyone of those firmwares that has the number 2.3.3?
I was looking at the base version number... that is what I didn't find... sigh
I can download something tonight if I just get the right files to try this again.
If I can flash the mobile with the right firmware,
When I checked About the Mobile this is what it said
Frimware version
2.3.3
Baseband version
I9000BWJV2
Kernel version
2.6.35.7-I9000XWJVH-CL184813*[email protected]*#2
Build nr
Gingerbread.xwjvh
That is all the info I have since I can't get into the phone now...
I can't get into recovery mode only Download.
I don't understand where to go from here... can I somehow go back to my original and then get the correct firmware, ROM etc?
I'm very confused. I bought the mobile on the internet so that might explain it...?