Database Develop

[Q] Accidentaly off during downloading firmware upgrade

How to solve? My SGS I9000 accidentaly off during downloading firmware upgrade. Now, when I switch on the phone, no Samsung and Galaxy S logo appeared, but the connected phone-pc icon appeared with warning icon in the middle. What can I do?

You have semi bricked it. you need to put it back in to download mode (vol down + home key + power button) press all 3 buttons at once. When in download mode reflash it again with Odin. If your 3 button doesn't work then you need a jig

Thanks for the reply.
Yeah.. 3 buttons doesn't work. I don't have any JIG right now. Maybe the best is go to Samsung Service Centre. Huu..

Plenty of jigs available on ebay or see the thread on here about making one

Anyone can verify this solution, is it work? Mine can't:
SOFT BRICK
Resolution
First off DO NOT PANIC. there is a simple solution, just remove the battery , plug the phone into the computer, press and hold volume down and it will enter download mode.
Click to expand...
Click to collapse
Source: forum.androidcentral.com/u-s-cellular-mesmerize/64681-how-full-system-wipe-restore-samsung-mesmerize.html

night_reader said:
Anyone can verify this solution, is it work? Mine can't:
Source: forum.androidcentral.com/u-s-cellular-mesmerize/64681-how-full-system-wipe-restore-samsung-mesmerize.html
Click to expand...
Click to collapse
You can't because it doesn't work that way. If you have a semi brick or brick (without the combo) you need a JIG/JTAG.
Other tricks like "heat the battery" "heat the Cellphone" or the one you pointed are just fake.

Recovery with jig?

Since we can force dl mode with sa jig, is it possible for a differently configured jig to do the same with revovery mode?

What are you trying to do?
Think about it, if you need a jig that likely means your software on your phone is toast, so would be recovery
If the phone can boot you can use abd to force recovery
Sent from my SGH-I897 using XDA Premium App

Thinking about folks that lose 3 button when flashing with odin. Not everyone is comfortable with adb (myself included). I was wondering IF it was possible.

mrhaley30705 said:
Thinking about folks that lose 3 button when flashing with odin.
Click to expand...
Click to collapse
so just use the download mode jig and flash the odin that fixes it.....

mrhaley30705 said:
Thinking about folks that lose 3 button when flashing with odin. Not everyone is comfortable with adb (myself included). I was wondering IF it was possible.
Click to expand...
Click to collapse
I am not sure that it is
I mean one could plug the jig in while holding power and see what happens
Sent from my SGH-I897 using XDA Premium App

Both you guys who's name starts with m, and end with numbers ... You're fu¢king with my dyslexia (auto correct ftw!) I thought it was one person talking to himself lol

studacris said:
Both you guys who's name starts with m, and end with numbers ... You're fu¢king with my dyslexia (auto correct ftw!) I thought it was one person talking to himself lol
Click to expand...
Click to collapse
Sorry man
But I hear what you are saying
Sent from my SGH-I897 using XDA Premium App

you can unbrick you galaxy S without jtag or jig , here is the steps:
1- Start Odin
2- Attach the USB cable to the PC (DO NOT ATTACH IT TO THE PHONE)
3- Press and hold "Volume up" and "home" buttons
4- Attach the USB cable to the phone while holding both buttons
5- The phone will enter in download mode
Install a new firmware and everything is going to be OK

vacsup said:
you can unbrick you galaxy S without jtag or jig , here is the steps:
1- Start Odin
2- Attach the USB cable to the PC (DO NOT ATTACH IT TO THE PHONE)
3- Press and hold "Volume up" and "home" buttons
4- Attach the USB cable to the phone while holding both buttons
5- The phone will enter in download mode
Install a new firmware and everything is going to be OK
Click to expand...
Click to collapse
ummm mr 2 post noob...
home and volume up is NOT download mode on the captivate! this isnt normal galaxy S
its both volumes then plug in... for 2.1/2.2 bootloaders
and its volume down and power then plug in for 2.3 bootloaders.

TRusselo said:
ummm mr 2 post noob...
home and volume up is NOT download mode on the captivate! this isnt normal galaxy S
its both volumes then plug in... for 2.1/2.2 bootloaders
and its volume down and power then plug in for 2.3 bootloaders.
Click to expand...
Click to collapse
misinformation! Thanks for shutting it down. I'm soft bricked since Thurs. I do not need try what is incorrect..
While I ordered a jig Friday, I'm two hundred 3button + usb, + battery attempts later and only one DL mode, and that fruitless for other reasons..

p1gnone said:
misinformation! Thanks for shutting it down. I'm soft bricked since Thurs. I do not need try what is incorrect..
While I ordered a jig Friday, I'm two hundred 3button + usb, + battery attempts later and only one DL mode, and that fruitless for other reasons..
Click to expand...
Click to collapse
Jig is amazing! Now Monday and I got the mail. One try, and into Odin 1.82 and I even completed the talon1.3 kernel load.. All in under 60 seconds, when I spent the whole weekend bruising my fingers trying to get into DL mode and worrying about whether I was more than soft bricked. I had gotten into DL mode twice in the 4 days with no progress in Odin.

[Q] Hard bricked s5570

Hello I accidently went and flashed a s5570i rom into my s5570 and now my phone will not turn on,
or into download/recovery mode.
I have a question will a jig get me into download mode?
Thanks in advance

Also plugged usb in and was holding
Home + power + volume up
and odin detects it but the phone wont flash or turn on and there is nothing on the screen

PhaseCoder said:
Also plugged usb in and was holding
Home + power + volume up
and odin detects it but the phone wont flash or turn on and there is nothing on the screen
Click to expand...
Click to collapse
Download mode is home+power+vol down
Tapatalk 2-vel küldve az én GT-S5570-ről

Yea I know that, but it wont boot to recovery or download mode.
But when I press volume up home and power odin detects it

heyy, the problem already has a solution?
my phone S5570 also has the same problem, black screen, can not go into recovery mode or download mode.
but go to RAMDump (vol up + home + power) and connect it to my PC, my S5570 is detected by the PC and odin, but can not flashing my rom.
stuck in "Setup Connection" I know it because my phone is not in the download mode.
whether the USB JIG is the right solution?
sorry if my language is bad

PhaseCoder said:
Hello I accidently went and flashed a s5570i rom into my s5570 and now my phone will not turn on,
or into download/recovery mode.
I have a question will a jig get me into download mode?
Thanks in advance
Click to expand...
Click to collapse
(I think this set of steps works in these
conditions: Hard-brick, absolutely non-
responsive to any button combination.
Odin still recognizes the phone when
connected through USB port)
1.- Remove both the SIM card and de
microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button
combination (known by you all)
4.- WHILE HOLDING THE
COMBINATION, insert the battery, and
keep the buttons pressed untill you get
the download mode.
5.- Flash your phone with a valid
firmware through Odin (Preferebly,
have Odin prepared before doing this
trick).........
hit thanks if this helped you and others....

R: [Q] Hard bricked s5570
Henota11 said:
heyy, the problem already has a solution?
my phone S5570 also has the same problem, black screen, can not go into recovery mode or download mode.
but go to RAMDump (vol up + home + power) and connect it to my PC, my S5570 is detected by the PC and odin, but can not flashing my rom.
stuck in "Setup Connection" I know it because my phone is not in the download mode.
whether the USB JIG is the right solution?
sorry if my language is bad
Click to expand...
Click to collapse
Try to press power+home+vol down+vol up
It'll go to emergency download mode.
Need tester for your rom (Galaxy Mini)? Just pm me! Sent from my BlackdroidLie v1 (My Phone often lies with this rom..)

steexyl said:
Try to press power+home+vol down+vol up
It'll go to emergency download mode.
Need tester for your rom (Galaxy Mini)? Just pm me! Sent from my BlackdroidLie v1 (My Phone often lies with this rom..)
Click to expand...
Click to collapse
and then?
I do not see any change, only detected on my computer
but the screen stays black

Send it to Samsung to repair it or try USB jig
Sent from my GT-S5570 using xda premium

tried jig didnt work, sent it to samsung was back in 3 days fully working
TIP: say you were during a call and phone turned off wouldbnt turn back on. do not mention ROOt or anything else

sir
PhaseCoder said:
tried jig didnt work, sent it to samsung was back in 3 days fully working
TIP: say you were during a call and phone turned off wouldbnt turn back on. do not mention ROOt or anything else
Click to expand...
Click to collapse
how much did you pay ?

hard brick galaxy mini
my galaxy mini also hard brick cannot go to downloading mode or recovery mode .tried jsb jig also cannot any other solution ???????

Same problem.. only solution is bring to ur frend technician, an operation will conduct to ur problem, pay for only 300 pesos here in the Philippines
Sent from my GT-S5570 using xda app-developers app

uploaded wrong rom on galaxy mini s5570,
phone turns off and dead I think,
nothing was working,
I've JTAG the phone from my friend,
phone turns on and able to enter in downloading mode only,
i've uploaded froyo android it failed,
then I uploaded arm11 boot file,
now phone won't be able to enter in DOWNLOAD MODE or recovery mode,
phone turns on and screen went black cannot be able to enter in DOWNLOAD MODE or recovery,
when I connect it to pc with usb cable it automatically turns on and screen turns black,
will usb jig works for it to enter in DOWNLOAD MODE??
please reply me if possible
thanks and regards
Sent from my GT-N7100 using xda app-developers app
---------- Post added at 10:55 PM ---------- Previous post was at 10:42 PM ----------
uploaded wrong rom on galaxy mini s5570,
phone turns off and dead I think,
nothing was working,
I've JTAG the phone from my friend,
phone turns on and able to enter in downloading mode only,
i've uploaded froyo android it failed,
then I uploaded arm11 boot file,
now phone won't be able to enter in DOWNLOAD MODE or recovery mode,
phone turns on and screen went black cannot be able to enter in DOWNLOAD MODE or recovery,
when I connect it to pc with usb cable it automatically turns on and screen turns black,
Odin also won't detecting it
will usb jig works for it to enter in DOWNLOAD MODE??
please reply me if possible
thanks and regards
Sent from my GT-N7100 using xda app-developers app

Jtag it again then try to re install the firmware
Sent from my GT-S5570 using xda app-developers app

brick s5570
I have a Samsung mini S7750, in resetting to factory defaults boot.
Boot mode or recovery mode does not.Only works is a combination of "home + vol up + vol down" moves into some mode where it while Odin detects the two com ports, but nothing to do, Odin hangs on setup conection.
JIG does not work [resistor 301kohm].Display is black.
[cz eng dictionary]

PhaseCoder said:
Hello I accidently went and flashed a s5570i rom into my s5570 and now my phone will not turn on,
or into download/recovery mode.
I have a question will a jig get me into download mode?
Thanks in advance
Click to expand...
Click to collapse
Try the simple just "hold power+home". It'll be leads you to recovery mode, then you should flash the appropriate rom for s5570. Cchopefully help
Sent from my GT-S5570 using Tapatalk

Help please
Hi. My S5570 is hard bricked. Will not turn on in any way i try. Does not go on download or recovery mode. The USB Jig method does not work for me. (I tried with around 3) and I connected my phone to my laptop and help down power + home + vol up and it does not recognise my device but when i do power + home + vol up + vol down it recognises it. I then used Odin to recover it but I have tried over 50 times and it is always stuck on "Setup connection...". Can someone please help? I have already tried re-installing Samsung USB Drivers. Still not working. Please help and thanks!

Kailens said:
Hi. My S5570 is hard bricked. Will not turn on in any way i try. Does not go on download or recovery mode. The USB Jig method does not work for me. (I tried with around 3) and I connected my phone to my laptop and help down power + home + vol up and it does not recognise my device but when i do power + home + vol up + vol down it recognises it. I then used Odin to recover it but I have tried over 50 times and it is always stuck on "Setup connection...". Can someone please help? I have already tried re-installing Samsung USB Drivers. Still not working. Please help and thanks!
Click to expand...
Click to collapse
Only hold vol up+home+power and THEN connect it if download mode works. I mean if it's recognized by the computer, download mode has to work, there is no way. If it does, then flash a stock ROM.
Oh and also something: before doing this, pull out your sd card and even your sim card. The same thing happened to my phone and Odin could flash it after removing everything.

Kailens said:
Hi. My S5570 is hard bricked. Will not turn on in any way i try. Does not go on download or recovery mode. The USB Jig method does not work for me. (I tried with around 3) and I connected my phone to my laptop and help down power + home + vol up and it does not recognise my device but when i do power + home + vol up + vol down it recognises it. I then used Odin to recover it but I have tried over 50 times and it is always stuck on "Setup connection...". Can someone please help? I have already tried re-installing Samsung USB Drivers. Still not working. Please help and thanks!
Click to expand...
Click to collapse
There is another way that u can try:
(Asumming that samsung mobile drivers are installed, with no Samsung KIES... & odin running in the foreground.)
*Remove sim, sdcard & battery.
*Now connect ur phone(without battery) to pc via usb cable.
*Now press the usual download mode keys(volume down & home & power buttons) together without the battery.
*While still holding those three buttons, insert the battery.
At this point Odin should detect ur phone so that u can flash stock firmware.
U can try this atleast since u r left with no choice:sly:.
Good Luck..!!:thumbup:
Hope this helps...!!

[Q] SAMSUNG GALAXY MINI DEAD-NEED to FIX it

HI all,
My samsung galaxy mini has got into dead mode,because I installed a custom rom from this link . My phone is not turning ON. Even when I'm charging my phone,it is not showing the charging icon and also when I connected it to PC via USB,it is not showing the battery icon. My phone was totally got dead.So,now I jus want to go to download mode,How can I do this.Please help me.....I heard that we can do this by using JTAG blah blah, I couldnt understand ,So give me the clear (procedure)explanation and required files that how can i go to download mode.
Thanks in advance
and sorry for this post if i posted it in wrong area,because I'm new to xda, and I dont know where should I post.
Thanks again

chandan77 said:
HI all,
My samsung galaxy mini has got into dead mode,because I installed a custom rom from this link . My phone is not turning ON. Even when I'm charging my phone,it is not showing the charging icon and also when I connected it to PC via USB,it is not showing the battery icon. My phone was totally got dead.So,now I jus want to go to download mode,How can I do this.Please help me.....I heard that we can do this by using JTAG blah blah, I couldnt understand ,So give me the clear (procedure)explanation and required files that how can i go to download mode.
Thanks in advance
and sorry for this post if i posted it in wrong area,because I'm new to xda, and I dont know where should I post.
Thanks again
Click to expand...
Click to collapse
ON mobile without USB,dont connect usb try without connected usb and go to download mode

chandan77 said:
HI all,
My samsung galaxy mini has got into dead mode,because I installed a custom rom from this link . My phone is not turning ON. Even when I'm charging my phone,it is not showing the charging icon and also when I connected it to PC via USB,it is not showing the battery icon. My phone was totally got dead.So,now I jus want to go to download mode,How can I do this.Please help me.....I heard that we can do this by using JTAG blah blah, I couldnt understand ,So give me the clear (procedure)explanation and required files that how can i go to download mode.
Thanks in advance
and sorry for this post if i posted it in wrong area,because I'm new to xda, and I dont know where should I post.
Thanks again
Click to expand...
Click to collapse
You have the right area so don't worry about that.
It looks like your phone is done for good, but let's try to salvage it. Follow the steps carefully to avoid messing it up even further.
1.Make sure your battery is charged. Use an universal charger or something similar to charge it if not.
2.Unplug your phone from your USB cable or charger.
3.Put the battery back inside but do not power it up yet.
4.Hold the VOLUME DOWN button and the HOME button. While holding both of them, press and hold the POWER button. You should be prompted with a DOWNLOADING message. If nothing shows, then it's dead.
5.If you are shown the message, then you can still make it work. Make sure you have all your USB Drivers installed. After that download ODIN.
6.Open ODIN and plug in your phone while it is still in DOWNLOAD mode.
7.If it recognizes it, follow the steps here and you should be done.

Lynuxen said:
You have the right area so don't worry about that.
It looks like your phone is done for good, but let's try to salvage it. Follow the steps carefully to avoid messing it up even further.
1.Make sure your battery is charged. Use an universal charger or something similar to charge it if not.
2.Unplug your phone from your USB cable or charger.
3.Put the battery back inside but do not power it up yet.
4.Hold the VOLUME DOWN button and the HOME button. While holding both of them, press and hold the POWER button. You should be prompted with a DOWNLOADING message. If nothing shows, then it's dead.
5.If you are shown the message, then you can still make it work. Make sure you have all your USB Drivers installed. After that download ODIN.
6.Open ODIN and plug in your phone while it is still in DOWNLOAD mode.
7.If it recognizes it, follow the steps here and you should be done.
Click to expand...
Click to collapse
As you mentioned in the 4th point, I've done what u suggested me to do by pressing the keys VOLUME DOWN,HOME,and POWER keys,but my phone is not switching into download mode....It is Dead mate..... Please help me

chandan77 said:
As you mentioned in the 4th point, I've done what u suggested me to do by pressing the keys VOLUME DOWN,HOME,and POWER keys,but my phone is not switching into download mode....It is Dead mate..... Please help me
Click to expand...
Click to collapse
There is not much left to do. If there is a method of fixing this type of hard brick, the chances are very slim. You're better off sending the phone to Samsung Care.

Czesiek333 said:
ON mobile without USB,dont connect usb try without connected usb and go to download mode
Click to expand...
Click to collapse
Google and YouTube search for USB JIG. that might help you. It works on dead phones.
Sent from my Desire S using xda premium

Galaxy mini dead !!!
Hello! I have also this problem but my phone comes into download mode by pressing vol up+home+power ..... My phone is dead by Rom mananger.......no light in screen no recovry mode.....just one download mode and maybe its emergency download mode ......help plzzzzzzzz
It can be detected by odibn but I tRied to flash it with stock rom.....froyo......but it sticks in setup connection: 0.......plz help me?

Vicky khan said:
Hello! I have also this problem but my phone comes into download mode by pressing vol up+home+power ..... My phone is dead by Rom mananger.......no light in screen no recovry mode.....just one download mode and maybe its emergency download mode ......help plzzzzzzzz
It can be detected by odibn but I tRied to flash it with stock rom.....froyo......but it sticks in setup connection: 0.......plz help me?
Click to expand...
Click to collapse
try a stock gingerbread by odin
and if it stuck at Samsung image go to recovery mod and clear data and cashe
Sent from my GT-S5570 using xda premium

Vicky khan said:
Hello! I have also this problem but my phone comes into download mode by pressing vol up+home+power ..... My phone is dead by Rom mananger.......no light in screen no recovry mode.....just one download mode and maybe its emergency download mode ......help plzzzzzzzz
It can be detected by odibn but I tRied to flash it with stock rom.....froyo......but it sticks in setup connection: 0.......plz help me?
Click to expand...
Click to collapse
Connection: 0 is drivers or kies problem. Uninstall all the Samsung USB drivers and re install them and also force stop or close kies running in background.
Sent from my Desire S using xda premium

Hmm

My S3 mini is dead

I instal CM 11, then i don't have network celluar. I install v20 baseband from CWM. Now my phone is dead. Nothing work ( Volume UP/Down + home+ power, power) What can i do? Please help. Not good end of the year....

mhubcio said:
I instal CM 11, then i don't have network celluar. I install v20 baseband from CWM. Now my phone is dead. Nothing work ( Volume UP/Down + home+ power, power) What can i do? Please help. Not good end of the year....
Click to expand...
Click to collapse
Read my faq here, last baseband for our device here, no signal issue here. BTW, I think it's too late now, that you f***** up your phone, anyway try it. Good luck & happy new year!

Does the phone boot? If it does try with adb, from your pc reboot to download (adb reboot download) and then flash the Rom via Odin
Sent from my GT-I8190 using Tapatalk

Not even turns on? (recovery or something?)

USB JIG will help you

I had the same problem and usb jig helped, now my phone can boot to download mode but when I flash any rom the phone gets stuck when booting. Tried flashing recovery but it doesnt boot that neither, anyone knows how to fix it?

Tuzuriro said:
USB JIG will help you
Click to expand...
Click to collapse
Nothing helps. I bought USB JIG - there's no reaction. I try everything.
I sow on the forum USB JIG with resistors. I bought on "Allegro" it's like eBay on Poland. Now i open this USB JIG and it's without resistors. whether this could be a problem - i have bad USB Jig??
The only activity is when i connect cabel ( from phone to computer) and insert the battery, then computer found and lost (every few seconds) new device called "U8500"
You can see some light in the tunnel?
Thanks for help guys. In Poland - Dziekuje