Quick eBay Wallet case review. - Galaxy Note II Accessories

First, I bought this lime green wallet case from eBay, because I work in the pizza delivery and it's easier to carry my driver license and phone in one pocket as a single unit, and my keys in the others.
http://www.ebay.com/itm/30083493888...eName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought that one because it was the only one that had 4 card slots from what I was able to tell.
First, the negatives.
The cutout for the S-Pen is only on the part that holds the phone, but not the leather. So it is really hard to take off the Pen without taking off the phone from the case.
Second, the cut out for the camera and flash is slightly small, so when you take a picture with Flash, the green bleeds into the flash, and thus into the picture. I'm going to attempt to cut it slightly larger with a knife if possible.
Third, once the phone is attached, it doesn't properly close like you would think. I have to push the latch slightly more into the middle and it'll connect.
Those are the three main concerns I have, and am wondering if its just the quality of this case or if all wallet cases are like this.
The Pro's
The leather is actually nice quality, and doesn't feel cheap or fake at all! I was surprised by how amazing it feels.
The slots for the cards are perfect fit. I am not struggling to get the cards in or out. Same with the cash part. As long as I don't put a 100, $1 bills, it shouldn't be a problem.
Over all, if I can recommend it, I'm not sure. I am happy with it, but just really only wish the S-Pen had a larger cutout on the leather.
Oh and, the leather portions do extend past the phone bezel, so in case of a fall, it should protect the bezels, but no doubt the magnet would fail and open the case and probably damage the screen. Although, no more worst than the official Flip Case.

Related

HTC Leo Leather Case for £2.99

Hi Guys, just received this in today's post and only cost me £2.50 (was ordered on Boxing Day, they are now costing £2.99) including postage and packing from Hong Kong. My partner also bought one for her Tocco and the total cost was £5 by Paypal. What a bargain.
It is superb, leather, and exactly as described with magnetic catch. Leo fits perfectly but unfortunately the screen guard is a midge's too large but it isn't needed anyway.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250552030138&ssPageName=STRK:MEWAX:IT
Regards, Baz
Nice find How long did shipping take, and I presume the magnet doesn't effect the screen, or the compass?
It took exactly 10 days from ordering to delivery this morning. My partner's brother bought one for his HTC and showed me on Christmas Day. I ordered mine the next day and it arrived this morning. It's brilliant, especially as it was only £2.50 (although selling now for £2.99). Includes case, screen protector and screen wiper.
Magnet doesn't affect the screen as it's on the flap. I have tried the compass and the needle is affected if you move the magnet over or under the phone.
Regards, Baz
That is so darned cheap!!! I am impressed!
Thanks Baz - Ordered
I will use it for those 'rough & tumble' times when the phone needs more than my (ill fitting) Zagg
Hi,
how is the HD2 held in the case i can't see from the photograph?
is the proximity sensor ok?
thanks
robertsmith1873 said:
Hi,
how is the HD2 held in the case i can't see from the photograph?
is the proximity sensor ok?
thanks
Click to expand...
Click to collapse
One of the pictures lower down show a plastic section that it clips into.
so it does, i did not hover the mouse, silly me.
Look ok for 3 of the queens pounds, i'm havin that.
TATA
Just taken delivery of one of these cases and I must say it's very good value. OK it's not 'true' leather but bonded leather so probably won't be as durable in the long-term as top-grain case, but unless you're extreme in your use of the HD2 then it'll probably last the 18-24 months of a typical phone contract.
The quality is very good and it fits very well, the plastic housing into which the phone fits offers great additional protection around the external perimeter of the phone so will reduce the risk of screen damage should the phone be accidentally dropped. The aperture for the camera lens in sufficiently deep enough to cover the lens cover so you don't get the annoyance of the sharpish lens from rubbing when in your pocket or on a nice polished table! Importantly (for me) it doesn't add too much bulk to the phone so it still slips easily into a shirt pocket and the phone can be easily popped-out so I can place it on my desktop cradle or in-car holder.
The finish looks very professional with the light grain being very similar to the grain on the original HTC leather pouch. It's a little more shiny than the original pouch finish and is in black, which I personally think suits the phone better. The stitching on mine is finished in a deep golden thread (slightly darker that the thread used on the HTC pouch) which adds a nice detail. The inside of the case is finished with a fine man-made suedette lining which shouldn't scratch or mark the phone in any way. There's no pockets for business cards or SD cards, but these would only add to the bulk and are not needed for most users I would have thought.
The fit is excellent and the phone fits into the hosing very snugly without the need for annoying clips or straps across the face of the phone. The magnetic clasp seems to hold very well and closes with a reasuring 'snap'. The volume control, Micro USB connector and headphone socket are all easily accessible when the case is open, although annoyingly there's no pass-through hole in the case to attach headphones when the case is closed. Apart from that and the compromise on the leather, there's little to fault this case and for the very low price you really can't beat it for smart looks and a good degree of protection for your phone.
In addition to the case, I was also supplied with a screen protector (with small cleaning cloth) which looks to be of reasonable quality although I haven't fitted this myself as I find these tend to lift at the edges and also reduce the responsiveness of the screen.
Given the low purchase price, I'll probably take a tool to the case and cut a whole for the headphone jack, I just need to find a suitable grommet/ferule or means to seal the hole so it doesn't fray or look too untidy. Any hints or tips on how perhaps to achieve this this would be welcome.
For £2.99, this is a no brainer. Just orderd mine.
omneity said:
Given the low purchase price, I'll probably take a tool to the case and cut a whole for the headphone jack, I just need to find a suitable grommet/ferule or means to seal the hole so it doesn't fray or look too untidy. Any hints or tips on how perhaps to achieve this this would be welcome.
Click to expand...
Click to collapse
Still waiting for mine (ordered 6th Jan...), so not sure what the material is in that area.
At your own risk,
If 'leather', use a belt hole punch.
Or a small SHARP drill (& if its hard plastic).
If (also) fabric, put a dab of super glue on the fabric, to seal the weave, first & let it dry before holing it.
If a man made woven fabric, heat the hole punch, so that it will fuse the cut edges of the hole when pierced.
Metal grommet / ferule not recommended in case it causes a short when inserting / removing the headphone jack. Over a period of time, might remove the gold plating off of a jack too.
Leather case
Picked up one of these a day or so after I got my device, same seller as OP.
The case is nice enough, have dropped it once already - no damage to the device thankfully. The front flap can fold all the way back round the device and be held there by the backside of the magnet in case you're watching a film/browsing/gaming and don't want the flap in the way.
The only downside that I can see is that it's an absolute git to get out of the plastic 'cradle' (more like a bleeding strait jacket) if you want to change memory card/battery or just get it out to show it off.
any comments?
was looking to get something along these lines, with slots for cards so I don't have to carry along my wallet at times, but without the belt clip/knob
the hand stitched cow leather is customizable but at 100euros, alittle out of my budget
omneity said:
Given the low purchase price, I'll probably take a tool to the case and cut a whole for the headphone jack, I just need to find a suitable grommet/ferule or means to seal the hole so it doesn't fray or look too untidy. Any hints or tips on how perhaps to achieve this this would be welcome.
Click to expand...
Click to collapse
Will it fit into a paper punch?
bakabear said:
was looking to get something along these lines, with slots for cards so I don't have to carry along my wallet at times, but without the belt clip/knob
the hand stitched cow leather is customizable but at 100euros, alittle out of my budget
Click to expand...
Click to collapse
Beware the proximity sensor for your ear. In that image it looks to be covering it!
robertsmith1873 said:
Beware the proximity sensor for your ear. In that image it looks to be covering it!
Click to expand...
Click to collapse
Thanks for the reminder! almost forgot bout it, is it across the top row beside the notification LED? looked through the manual but no reference to it
BTW, found a cheaper alternative, just as functional from another thread
these ones bout 40euros each, the tan one allows access to the bottom ports whereas I dont think the black one does
which would you guys prefer? worry that the tan one might block the sensor as well
Just ordered one, thanks for the tip!
Simon
Leather slideout sleave for the HD2
Hi Community, I like my HD2, so I bought a leather case for it. It's like WOW.
It costs 13,90 Euro - i.e. not the world and fits very well
Check it out in EBay:
SunCase Etui Tasche Ledertasche Case LUXUS für HTC HD2
The seller is: sale-hamburg
http://cgi.ebay.de/SunCase-Etui-Tas...temQQptZDE_PDA_Zubehör_KM?hash=item23043167fb
Have fun, as I am having
Regards
Just got my £2.99 case today. It's epic value for money I'm hoping that this will be enough to protect my HD2 when I go snowboarding in a couple of weeks time.
damn i noticed this thread too late... they are sold out i hope they will get some more for salle

Slim Magnetic PU Smart Cover Stand (ebay) + Speck FitFolio Review, Comparisons, etc.

Hello! This is a quick review highlighting these two products. Of all of the cases I've tried (believe me, I have about 7 or 8 at home...) these two reign king. I'm unsure of which one I'll ultimately go with, but I do have some opinions about each that I'd like to highlight. For what it's worth, you can't go wrong with either case - but they do have slightly different features which may or may not sway you in those corresponding directions.
This entire post isn't really a defined "this is my Speck FitFolio case review" and then following "this is my eBay case review," but instead it's kind of a mish/mash of the two products all at once. I'll compare them, highlight differences/similarities between the two, etc.
To start, here is the direct link of the one I purchased from pandamimi2011 on eBay. I went with this user because it ships out of California so I knew I wouldn't have to wait two months for it to come from China, plus his/her feedback looked solid. I paid for the middle tier of shipping and it came on Wednesday when I ordered it on Sunday. I'm in Pennsylvania (on the other side of the country), and we just had hurricane Sandy rip us a new one. To say I'm satisfied at the shipping speed is an understatement.
The feel of this case is pretty nice. It has tiny grooves over it, so it almost seems like a very faint "metal file" feeling of some sort. It's got a slight rubbery texture, which when coupled with the grooves feels a bit more grippy than the Speck case, which is something I like. It does however present it with a slight -1 in the pocketability department. The Speck can be slid into my back pocket of my dress pants somewhat easily. The thickness of the Speck vs the width of my pocket makes pocketability decently possible, however if the thickness of the N7/Speck were any thicker, it'd be a different story. With the eBay case, I can make it happen, but I have to wrestle with it for a few extra seconds first. Not a big deal, but it's enough of a deterrent that when I'm walking up and down the hall at work, for short walking bursts from one tech issue to the next I may just hold it.
When both cases are opened and folded back the magnet does not interfere. Each one wakes up/sleeps the device easily and predictably. I will say this, though... when I was trying different variations of the eBay case to ensure the magnets worked properly, I noticed something. It appears as if the wake up/sleep magnet on the Nexus 7 is located on the left side - not on the right. I say this because due to the eBay's case design, it has a "tri fold" thing going on with the front flap that covers the screen. If I fold it so only the left side is flat on the screen, yet the middle and right is up in the air away from the tablet, it indeed sleeps/wakes up the N7. Whenever I saw other video reviews, people would point to the right side to indicate it had a smart feature. Either way, doesn't matter, but just an observation worth pointing out.
The back shell (the skeleton) cradling the Nexus 7 in both scenarios is solid. With each case, the N7 pops in easily and securely. With the Speck case I found it's easier to "eject" the N7 when starting from the left side, where there are some spaces in the mold. It's much more difficult to start on the right side where it's full length. See picture to see what I mean. Meanwhile with the eBay case, both the left and right side spans the entire length. Because of this, it makes the "eject from left side" idea (which works great on the Speck) fail with this case. Instead, it's easiest to eject the N7 around the charging port cutout at the bottom. See picture.
Another difference between the two worth noting is the latching mechanism. The Speck case has a clip, and a very well designed clip. The clip itself is attached to some sort of heavy elastic, which has a very slight amount of "give" when securing the flap. It's very solid and gives me 100% confidence that if I drop my case, it will not open unless, somehow, it's an epic fall that manages to break the clip itself. The eBay case however latches based on magnets. There's a magnet strip in the flap that folds behind the tablet when closed. It's not a strong magnet, however because it's an entire magnet strip, it holds on decently. I held my tablet with both hands and shook it until the flap opened up. You sure have to give it a good solid swift movement in order to have enough momentum for the flap to fly open. If my tablet were to take a tumble down a flight of stairs, the Speck case would almost definitely have the +1 because I believe the magnet would give way and open up. For just general protection, excluding extreme falls etc, the magnetic flap provides adequate security. This didn't really sway my opinion in either scenario, since I was just happy to have a case like this where there is a magnetic flap to keep it closed... whereas some cases like this don't have this magnetic flap whatsoever.
Speaking of the latching mechanism, one concern I have about the Speck case is while it latches securely, I do wonder how it'll hold up in the long haul. I use my Nexus 7 for a lot at work as I work in IT. I'm frequently opening, closing, opening, closing, over and over and over possibly hundreds of times a day. In the 10 days I've had the Speck case, I've noticed that the latch has become much easier to clip and unclip. Some may attribute this to being broken in, but considering it's hard plastic vs hard plastic, some degree of wear may be a side effect. So while the Speck latch holds closed more securely, the eBay case would almost definitely have more longevity. I also like with the eBay case that I can kind of throw the front flap shut in my hand, and thanks to the momentum, the magnetic flap flips around the back of the case and stays put thanks to the magnets grabbing it, which is kind of nice because it doesn't require a physical need to latch the clip. This may be splitting some rather extreme hairs, but I wanted to document exactly what my thoughts were on all accounts, as major or minor that they might be.
The other difference I want to notate is the button cutouts. The Speck has volume up/down in one cutout, a separation, and then the power button cutout. This is nice because when I'm feeling for the buttons it's more obvious that I'm hitting volume up instead of power, which often happens. The eBay case has one open cutout for all three buttons. However, while all three buttons are lumped together, the actual thickness of the plastic mold is indeed thinner, making the feeling of the buttons easier to detect even though there's not a separation. It's one of those half empty/half full things that likely doesn't matter in the grand scheme of things, but there's pros and cons to notate on both sides.
The stand up positions with both cases are decent. The Speck offers a little more versatility for some of my uses, as I'm often laying down in bed on the N7. Due to the wider platform the case gives when it's propped up in horizontal mode, it's a bit easier to prop it on my stomach/chest without issue. This probably goes without saying since most people would detect this immediately when they see a picture, but with the eBay case, due to its tri-fold design, it makes the "propped up on stomach/chest when laying down position" near impossible. It does however provide a decent range of prop positions when on a table/desk of some sort, much like the Speck. Certainly not a deal breaker, but worth mentioning.
Overall, you won't lose no matter which case you get. Both of these cases are easily contenders for the #1 spot of all of the cases I've used. The number 1 thing I love about both cases is the plastic mold they fit into. There's nothing covering the bezel anywhere and there's none of this 6 prong thing going on around the edges like the BluRex Ultra Slim case among other various cases. (not to say it's a bad design, but I personally prefer the mold design). I do believe I'll be sticking with the eBay case for a while, as I find the magnetic flap to be a little more well suited for my uses. I also think the eBay case has a slightly better price-vs-product ratio, as even with mid-tier shipping I paid 18 or 19 bucks for it, while the Speck ran me 30 bucks. Considering both of these cases are directly on par with one another, it stands to reason that the eBay case in this scenario could easily be the winner for being the "better bang for the buck." Either way, both cases are very worth their money and both are highly recommended.
Great in depth review! Need a pic gallery comparing findings would be nice. Not saying to post every single pic, but maybe host it somewhere where you already uploaded them?
Nevertheless, the review is well done! :good:
kpjimmy said:
Great in depth review! Need a pic gallery comparing findings would be nice. Not saying to post every single pic, but maybe host it somewhere where you already uploaded them?
Nevertheless, the review is well done! :good:
Click to expand...
Click to collapse
That was my intention when I wrote the review a few days ago. The above info I had written up before and just saved in an office doc, so to post I just pasted over. I'll be able to add pictures later this evening.
Which one is thinner?
Ehh we may have a show stopper finding here. I was using my tablet earlier with the eBay case and when folded back it shut off at one point. I spent what felt like five full minutes trying to replicate it but couldn't. Later on when I got home I was able to... it's only at a very exact point that it happens, but once I got the hang of it I could replicate it a bit easier... I just find it crazy that for hours after unboxing it I wasn't able to notice it. The eBay case indeed has a design flaw in that regard. I'm going to email the seller and see what he has to say about it.
Something else worth noting is when the Speck case is folded back you can clip it in place which is a nice touch. Without clipping it when folded back cases like this tend to have a sloppy feeling when holding it with one hand. That being said, I'd say the Speck takes the cake here.
Sent from my Nexus 7 using xda app-developers app
JaSauders said:
Ehh we may have a show stopper finding here. I was using my tablet earlier with the eBay case and when folded back it shut off at one point. I spent what felt like five full minutes trying to replicate it but couldn't. Later on when I got home I was able to... it's only at a very exact point that it happens, but once I got the hang of it I could replicate it a bit easier... I just find it crazy that for hours after unboxing it I wasn't able to notice it. The eBay case indeed has a design flaw in that regard. I'm going to email the seller and see what he has to say about it.
Something else worth noting is when the Speck case is folded back you can clip it in place which is a nice touch. Without clipping it when folded back cases like this tend to have a sloppy feeling when holding it with one hand. That being said, I'd say the Speck takes the cake here.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Any word from the seller?
I prefer the Blurex/Moko style than your ebay case. It is classy and suitable for business style. ebay case looks cheap with the plastic cover, and it may hurt the Nexus 7's plastic sides.

Review: Amzer Shellster Case/Holster

Didn't see one of these for the Note 2, so here we go:
The Shellster comes out of the box looking nice, very nice. Looks like it cost way more than $15-20. The case itself snaps onto the phone very, very snugly. It's on there to the point that getting it off involves so much pressure that you feel like you're going to break the phone, and it will probably drag across the volume rocker as you go. Kind of scary to do to a new phone.
The holster itself lacks and kind of clip to keep the phone in, but that's not a huge issue because of how tight a fit the cased phone is in there. It feels very snug and secure against your waist. The belt clip on the holster has a metal slider inside that allows it to prop the case up as a holster in either landscape or portrait orientation. It's a very nice touch. The belt clip can be rotated along a 180-degree axis to fit the phone more comfortably to your waist--a big help when your phone has a 5.5-inch screen!
All that said, there are some very real problems with it. The case does not have any protection along the top of bottom of the phone. The holster does, as it extends slightly above the top and has a plastic loop on the bottom for the device to rest in, but not the case. The case does have a raised bezel, but not by much. Given all that, I do not believe that the Amzer Shellster offers much in the way of protection in a fall.
The second big issue, and the reason mine is being returned, is poor build quality. Earlier today, less then three days worth of use on the case, I bent over to pick something up. I am not a big guy; bending over shouldn't generate a ton of stress. The holster was aligned so that it rested horizontally along my side, as opposed to resting straight up and down. As I bent over, I heard a snap, and the holster had fallen off and hit the concrete floor of my garage, with the belt clip still on my waist. Luckily, my phone was out of the holster at the time, so there was no damage. All the same, a product breaking under normal conditions three days after getting your phone just stinks of terrible build quality to me. Because of that, I can't recommend the Amzer Shellster case to anyone. Poke around on eBay or Amazon, and you'll find other holster-style cases for considerably less money. They might be of similar quality, but at least you're only breaking $8-10 instead of $20, right?
Pictures attached:
1. Phone lying on its back, case attached. See the thin strips on the side? That's the case.
2. Back of phone, bottom. Access to the S Pen remains easy.
3. Back of phone, top. Nice, raised case protects the camera and LED.
4. Top of phone. Shows the complete lack of protection up there, as well as how little of the case is up front to keep the screen from being damaged while lying face-first.
5. Damage to the holster itself, with the belt clip that popped off.
Thanks for sharing. I thought about getting one of these, but I could see that it lacked protection for the top and bottom of the phone (based on YouTube videos for other phones). Plus, as you mentioned, the hard plastic cases have the tendency to scratch phones, especially when removing them. Thanks again.
I completely agree with you in your review. I have used only seidio cases and holsters on my past 5 devices. Unfortunately, they just were not ready and shipping and I did not trust this giant phone to being in my pocket bare. I ordered the amzer case and holster and was able to get it this past week.
First thing I noticed off the bat was how tight an initial fit it was getting the case onto the phone. Was afraid I was going to crack the case or damage the phone. I was very unimpressed with the back texture of the case. It is waaaay to slick for my taste. Compared to the bare plastic of the phone, it feels like it wants to slip out of my hand holding it one handed. As you stated, there is NO protection on the corners of the phone. Top or bottom. A fall from any height that lands on a corner will have nothing protecting it.
I also noticed a huge amount of flex in the belt holder. it is made of very thin/cheap plastic. Trying to quickly take the phone in and out of the holder is more of a two handed job. Sadly, I am returning it and getting the seidio. They are finally in stock.
My advice, avoid the case. While it is inexpensive, it just will not do a good job of protecting the phone and the belt clip is just about useless.
Damm I just ordered this from expansys 2 days ago.. waiting for it to come now.. Wish I would have seen this before.. To late now.. I had this case for my Galaxy Nexus and I was happy.. That is the reason I reordered it.. Well I guess I will see what happens when I get here
Edit: got the case yesterday. I like it.for 15 bucks you can't beat it
removing Amzer Shellster case
Can you explain describe how to remove this case frome Note 2
Good review and good info. Looks like one to pass up.
I have this case since a holster case is a MUST on my list. And I do agree with OP with his concern (my clip also comes off one time but I can re-attach it without problem). But the first issue could be resolve with using another case with the holster (I did the same thing with my Note 1). Currently, I am using this Cruzerlite case with the holster without problem (a bit tight but get the work done). Therefore, it's not that bad as a cheap solution until I found better alternative.
Double 0 7 said:
Can you explain describe how to remove this case frome Note 2
Click to expand...
Click to collapse
Slide a fingernail between the case and the side of the phone at a corner (power button side is "easiest"), force the two apart. It honestly feels like you're going to break the phone in half.

Review: Artech 21 Little Rock Series Rugged Case

I was given this product at a discounted price in exchange for an honest review.
I’m not someone who normally puts a case on their phone because I don’t think most phones need them. As an owner of the Samsung Galaxy Note 5, I still feel the same way, but the glass back has made me wary. Because of this, I’ve taken the opportunity to review some Note 5 cases to see how they fare.
A few days ago I received the Little Rock Series rugged case from Artech 21. When I first opened the mailer, I gave the packaging & case a good look over. The packaging isn’t anything to write home about, it’s just some cardboard & clear plastic to hold the case. At first glance, I was very impressed with the construction and overall design of the case. The case itself looks to be made from a pretty rigid & durable plastic, with a silicone bumper wrapping the edges and inside of the case. The front is made from the same plastic material as the back with a screen protector glued to the front. The screen protector also contains a cutout for the home button, which is good for those of us who use the fingerprint sensor. Your phone will survive some of the worst falls with this case. Not that I plan on trying it, I’m sure my phone could easily survive a 40-50 foot drop with this case on it and come away unscathed. In terms of looks, it’s a good looking case that comes in several color combinations. I opted for the light blue & black. I probably could’ve done without the plastic divets on the back, but hey, it’s merely cosmetic.
After giving everything a good look over, it was time to put my phone in the case and put it to use. This is where I experienced some difficulty. The instructions included with the case could have been a lot clearer than they were. I spent a good 5 minutes trying to get the top off. See my tip in the last paragraph on how to open it. Once I got the case open, getting my phone in was straightforward and effortless. Although the case is on the lighter side (thanks to its plastic build), it does add quite a bit of heft to the device. The phone feels bulky in hand, like holding a small brick. That being said, the silicone is grippy and I don’t see there being only a slim chance of this phone slipping out of my hand. The power and volume buttons still work flawlessly with the case on. My only real gripe in using this case is that because this is a rugged case and has a fairly deep lip, it is extremely difficult to do side swipes on the phone. This is a problem because most app menus pull out from the side. Most times I had to resort to pulling out the S-Pen to perform the action. This is something to keep in mind if you plan on buying this case.
Artech 21 did an okay job designing this case with the ports in mind. Even though this is a bulky case, the S-Pen is still easy to access and remove. The bottom of the case contains flaps covering the headphone jack and micro USB port. Since this case is far from being waterproof, I don’t see why these flaps are necessary. They just become a headache when trying to charge your phone or plug in headphones. Other than that, there is easy access to the rest of the ports.
Personally, I don’t see myself using this case, as it provides too many challenges in using apps and is too bulky for my needs. I mean, I work for a software company and my phone rarely needs this level of protection on a daily basis. Now, if you were someone who worked in a job like construction or some other job where bumps and falls happen frequently, this is certainly the case you want protecting your phone. Sure, you could by a more expensive rugged case, but this case gets the job done for a fraction of the cost of its competition. For what it is, I’m very satisfied with this case and think it is great for those who need it. The only things I would change about the case are: 1) getting rid of the flaps covering the ports, and 2) clearer instructions on how to open the case. Aside from that, the Little Rock Series rugged case gets a solid 4 stars from me.
Here’s a tip to get the case open: start with the corner of the case where the S-Pen will be. Lift up the silicone over the lip of the front case & then proceed dislodging the rest of the case. Do the same when the phone is in the case, but it’s a bit more difficult.
Amazon review link: https://www.amazon.com/review/R2EXBTA7BIOATX/
can you add an amazon link , dear?

Review-Poetic Note 5 revolution case

I have been searching for a protective case for the note 5 and having tried a few I can say that the Poetic revolution is the best one I have tried so far.
It's not ungodly heavy like some of the other ones, it does add some heft but more in line with what I would expect.
It offers full body pritection, including a plastic screen protector. I have a love hate relation with them honestly, they ultimately end up scratched up and I remove them in time. I put the phone in the case with my tempered glass protector still in place so that is probably the reason but this one I have yet to decide if I like it, it's crystal clear but slightly impedes touch sensitivity and does not sit flush against the glass, requiring you to tap just a bit harder. That's actually a plus tho because on some other cases, the screen protector sits right on the glass and you end up with watermarking. Like I said tho, I kept my glass one on so that's my own doing. The cut outs for the home button, speaker and camera are dead on.
The corners are squared off which should distribute the force of an impact over a larger area, hoping to protect better. The sides are pliable while the back is hard.
I like the volume buttons, having 2 buttons instead of like a slider deal allows easy adjusting with no guessing. The ports are all covered with flaps, it looks to be a tight fit for larger headphones although the stock ones fit fine. The s-pen, I don't know...I am 6'4 and have larger hands but I can not access it. It sits too deep, a key or something you could pop it out I am sure, depending how often you use it, it might be an issue. I think if you need a protective case that's a minor annoyance, just worth noting.
The kickstand works well, mainly in landscape. It's easy to pop out and close, doesn't rattle and stays put rather well.
The only real downside to this case is wireless charging does not work for me. I have a Spigen 3 coil charger and placing the phone on it I get nada. Most likely due to the metal kickstand I would guess.
Depending what's important to you in a case will ultimately determine if this one's for you. I work in construction and welding, I need reliable protection and will use this case when working. Weekends, etc I'll put on a less protective case. Personally, glad to have this one as an option and if you are looking for a good quality, protective case, keep this on your short list.
More pictures
Couple more
My review of the Poetic Revolution case
Disclaimer: I got this case free in exchange for this review. I have previously recieved and reviewed Poetic's Affinity case, a slim case which I like so much it has become my daily driver. How will I like a big case such as this one after using the featherweight, unobtrusive Affinity? Well, let's see....
The case arrived quickly. It was plainly packed in what appeared to be a non-retail plastic envelope. I don't know if the retail package ships with instructions, but mine didn't.
The case looks very sharp. It is big and blocky, with a somewhat military look. It consists of two pieces. There is a black plastic front, which features a built-in clear plastic screen protector with cut outs for the front camera, speaker and home button.. And then there is the back piece. Like the other Poetic case I have reviewed, this one is a seamless combination of hard plastic and rigid rubber. The plastic parts are black, and the rubber is a military drab greenish brown that suits the look of the case. The plastic and rubber meet in a combination of ridges and bumpers that are aesthetically sound. An aluminum kickstand sits squarely in the back. The top right corner of the case has a squared off rubber "loop" which is maybe for hanging the phone on something? I can kind of see the appeal of such a feature, but it adds bulk to an already big case without feeling substantial enough that you want your device hanging from it. There are also some "screws" and "rivets" which seem to be purely cosmetic and just molded into the plastic. Inside the back there is some kimd of texture that looks like it is designed to distribute force and further protect the device in case of a drop or other impact.
The ports line up perfectly. There are covers for the charging port, headphone jack, and even the S-pen. I like the complete protection (and this is the best S-Pen protection I've seen), but I will say that the S-Pen port is kind of hard to squeeze your finger into.
The front part of the case is supposed to snap on. Normally, I do not care for cases that are rigid inside, as I feel they jack up the phone's finish. While this may have been true of Samsung's previous chromed plastic bodies, I have no such concern about the aluminum edges of the Note 5.
Like the poster above, I tried to leave my glass screen protector on when first installing this case. It is obviously not designed for this. No fault of the manufacturer. My results were the same: a bowed out, unresponsive, mushy feeling screen cover. In addition, the convex fit made an easy access point around the camera, speaker and home button for dust and lint, which soon began to accumulate. So, I took off my glass. After doing this, the front of the case snapped on snugly with a satisfying "click". The screen protector, which is visibly thicker than that of the Otterbox Defender, sat flush and tight on the surface of my phone. Two days after taking off the glass(which I left on for two days), I see nothing accumulating under the screen at all. I am seeing some very fine scratches, but nothing visible.during normal use. And, for the record, I only clean my phone's screen/screen protector with lens cleaning wipes. Never dry. And my phone is usually in my pocket when not in use. I work indoors in clean dry conditions.
The front of the case goes on easily (once you remove your glass lol). The back, like most rubber over plastic cases, stretches slightly over the back and hugs a lip on the front of the case. It fits snugly and well, ....except for one part. The lower left. Not a huge deal, but it just doesn't seem to sit flush like the rest of the case, no matter what I do. There is a pic of this corner attatched. But, aside from that small quibble (well, small to me, YMMV), the fit is good and solid. Even the part that isn't 100% flush doesn't feel loose or mushy.
The case is bulky, no doubt. Either you like the way that feels in the hand or you don't. The back of the case is hard plastic with some rubber ridges. The sides are rubber with a barely visible micro texturing that seems to add a nice grip. The phone is not slippery in the hand. Nor is it slippery on a table, whether laid on its front or back. Though big, the phone feels good in the hand, not slippery or slimy. If you use your phone in landscape mode a lot, you need to be mindful of the "loop" on the top left corner. It may get in your way, prompting you to flip your device over to play your game or watch your video.
The lip around the screen has a nice angle to it, so you don't feel like you have to worry about hitting the screen anywhere. It doesn't interfere with the function at all. Can't really say the same for the port around the camera. It's deep and plenty protective, but it doesn't have any kind of bezel or anything like I've seen on some Note 5 cases. This can make it feel like you're "digging" for the heart rate monitor, which is kind of a pain.
The buttons are perfectly covered. But they do feel a little spongy. In addition, the sides of the case are angled inward, kind of under the top, almost like a saucer, get me? This angle has the effect of making the button pushes feel slightly awkward.
The hole around the speaker is deep (the rubber here is very thick) and more tube like than funnel shaped. This has the effect of changing the sound from the bottom speaker somewhat. Making it kind of "canned" sounding.
The kickstand is good and solid. It sets the phone at a good angle for viewing/gaming in landscape mode (but again, you have to be mindful of where the loop is). It works in portrait mode as well, but I dont know if it is intended to be used that way
The case is kind of a bear to take on and off. I put my phone into an armband when I run, so I take mine out of the case a lot. I found a workaround (jamming the thing case and all into my old Note 3 armband lol).
Lastly, as the previous reviewer noted, wireless charging does not work with this case. I must say, as common as wireless charging is becoming, this seems like a grave oversight.
At the end of the day, the phone offers good, solid protection, looking very good while doing it. But it does seem to sacrifice form in favor of function. For those who require, or just like, like solid protection, don't mind bulk, and don't need the case to slip on and off like butter, this may be the case for you. It certainly is substantial and protective. But it isn't terribly user friendly in some respects, maybe even less so than other cases of its type. In any event, even though I generally prefer a slimmer case, I am.in no hurry to switchn and will probably continue to use this one until the next time I absolutely have to charge wirelessly or wear skinny jeans. I don't see it as a daily driver for me. Partially because I just prefer smaller cases (which is no reflection on the product or manufacturer)n and partly because this case does seem to have a few drawbacks. I can definitely see myself using this for occasions when I am traveling or feel the need for extra protection. Ultimately, I have mixed feelings about the case. It has its strengths and weaknesses.
Pros: solid, offers complete coverage and protection, dual-layer (plastic/rubber), thick, and snug screen protector, covered ports, kickstand, nice grip, good looking, great value for the price (around $20)
Cons: S-Pen difficult to reach, difficult heart rate monitor access, bulky, loop adds bulk and reduces ease of use, buttons mushy and slightly awkward, no wireless charging, case affects speaker sound
More pics

Categories

Resources