Related
Hi all, im having one kind of a problem, me and my friend, have tried to unlock his x8 Bootloader, and i have search and saw the hard brick warning, and checked the device says 9w12 so i thought it was safe, and it wasnt, because the device didnt work after using Unlock method.
Now we have Jtaged it using a box and made it work, and everything was fine, untill he tried unlocking using Flash tool, and it said unlocking was ok, but it didnt actually work cuz he couldnt flash nA kernel after. and then his device went off again, so we had to jTag it again with a box to make it work,
Now its back to stock 2.1 and cant find service, it can see the networks but cannot get signal (no service), and i read a lot on that i gotta use SMEC 77727 or something to make it work, but its the same we used to get our device bricked, so any advice plz guys help?
1.Relock bootloader
2. Unlock bootloader with FLASHTOOL not with msm7227 tools.
First time when I unlock bootloader I unlock it with msm7227,but I didn't have signal. After 1-2month I see that bootloader can be unlocked by flashtool. I try unlock bl with flashtool and now I have signal and I really enjoying!
2010matej said:
1.Relock bootloader
2. Unlock bootloader with FLASHTOOL not with msm7227 tools.
First time when I unlock bootloader I unlock it with msm7227,but I didn't have signal. After 1-2month I see that bootloader can be unlocked by flashtool. I try unlock bl with flashtool and now I have signal and I really enjoying!
Click to expand...
Click to collapse
thanks for your response, can u tell me how to relock bootloader, my eyes are bleeing from searching and i dont wanna hard brick the x8 again sir. x(
Use x8toolbox
Also, using 1stools. first time i tired to unlock, it said SEMC SIMLOCK CERTIFICATE, but now it says NOT RECOGNIZED SIMLOCK CERTIFICATE.. what would this mean?
before i do anythign stupid now
That message will change back to original message when you relock..
It's the reason you get no carrier lock.
I downloaded x8tools, but its based on Cmd command line, not sure where to find a tutorial, im looking at the moment to find one
I have flashed latest 2.1 stock, and running, and s1tools says nothing to restore, is my Boot loader locked now?? and what should i do next. still no service
fearkillerr said:
I have flashed latest 2.1 stock, and running, and s1tools says nothing to restore, is my Boot loader locked now?? and what should i do next. still no service
Click to expand...
Click to collapse
Go to General Section and look for Lucastan's post..
Full instructions are there I believe.. Don't be afraid!
Good luck..
thx friend, fingers crossed, going now
fearkillerr said:
thx friend, fingers crossed, going now
Click to expand...
Click to collapse
Just checked - Doesn't give instructions but it's rather simple anyway - just go for it man!
Flash tool gave me this error when trying to unlock: WARN - Cannot identify your SL. Aborting
also, pc companion cant recognize my mobile when i try to repair its software, whats up with that??
Did you relock the bootloader first using x8toolbox?
No, because i cant open it, everytime i click on x8tools.cmd it open and close, no idea why,,,, do u have IM (hotmail or so) im in trouble really might need the help
fearkillerr said:
No, because i cant open it, everytime i click on x8tools.cmd it open and close, no idea why,,,, do u have IM (hotmail or so) im in trouble really might need the help
Click to expand...
Click to collapse
OK got ya.. We could do this over IM but it's good for future users with the same issue to see this thread and find a solution.
So let's go..
1: Don't double-click x8tools.cmd
2: Open MS Command Prompt and cd\ to the directory where you saved it. (Desktop is really handy)
3: Type x8tools.cmd into command prompt
4: Let the magic begin!
alright, here what i got:
starting x8toolbox.final . . .
'busybox' is not recognized as a
operable program or batch file.
did as u said, so whats next bro?
fearkillerr said:
alright, here what i got:
starting x8toolbox.final . . .
'busybox' is not recognized as a
operable program or batch file.
did as u said, so whats next bro?
Click to expand...
Click to collapse
Have you adb installed/configured?
Ok managed to make it work,, let me see now..
I can only see unlock bootloader option, no relock, is relocking under unlocking section?
fearkillerr said:
I can only see unlock bootloader option, no relock, is relocking under unlocking section?
Click to expand...
Click to collapse
Can't remember off-hand - I don't use windows - I'm a linux guy!
Won't do any harm to have a look..
hi
i tried rooting my phone and somehow ended up messing up
now my phone only boots to bootloader... cant do factory reset (-it bring me back to bootloader)
it says "tampered,relocked" and sometimes "security warning"it seems i don't have software on it i looked up and people say i need to flash original software but my phone dose not mount as mass storage.. and even if it did i did not find the software please help !!!!
device:sprint htc one
Download the RUU from here http://www.htc.com/us/support/news.aspx?p_id=629&p_name=htc-one-sprint
Run it from your PC
i get error code 170
Did you re-lock your bootloader?
Yes - i think so
And it says relocked at the top
sammy6014 said:
Yes - i think so
And it says relocked at the top
Click to expand...
Click to collapse
When you get the error do you follow the instructions on how to fix it?
All it says is to make sure that its plugged in...
And it says fastboot usb on my phone screen....
sammy6014 said:
All it says is to make sure that its plugged in...
And it says fastboot usb on my phone screen....
Click to expand...
Click to collapse
install htc sync and remove after installation..it will leave correct drivers intact..try installing through RUU again
atulclassic said:
install htc sync and remove after installation..it will leave correct drivers intact..try installing through RUU again
Click to expand...
Click to collapse
still get error 170
Go to htcdev.com and follow the instructions to unlock your bootloader again. This will root the device. After that find one of the guides on here to flash a custom recover y and then flash a ROM
onelight17 said:
Go to htcdev.com and follow the instructions to unlock your bootloader again. This will root the device. After that find one of the guides on here to flash a custom recover y and then flash a ROM
Click to expand...
Click to collapse
on htcdev i get error 160
sammy6014 said:
on htcdev i get error 160
Click to expand...
Click to collapse
Where are you seeing that error? In the command prompt box?
i'm having trouble flashing the new viperone 3.5 ROM. I flash it and get stuck at the HTC screen, any help would be nice.
Hey!
My SP has a locked bootloader and I can't unlock it because it isn't allowed.
But I want to install FXP CM11. As I can't acces fastboot mode can I flash the boot.img file through CWM if a make a flashable zip file from it(android.stackexchange.com/questions/36265/flash-boot-img-without-using-fastboot-usb)? If yes, how to make it? I don't really get that description. Thanks in advance.:fingers-crossed:
koostamas said:
Hey!
My SP has a locked bootloader and I can't unlock it because it isn't allowed.
But I want to install FXP CM11. As I can't acces fastboot mode can I flash the boot.img file through CWM if a make a flashable zip file from it(android.stackexchange.com/questions/36265/flash-boot-img-without-using-fastboot-usb)? If yes, how to make it? I don't really get that description. Thanks in advance.:fingers-crossed:
Click to expand...
Click to collapse
AFAIK changing kernel in locked bootloader could result in brick, not bootloop. CMIIW, but you should be careful with carrier locked bootloader
You can't install custom kernel on a locked bootloader you will get error not installed..... Even if installed it won't boot up, you will end up with a very stylish paper weight.
DON'T EVEN TRY TO MAKE IT WORK.
just accept it can't be done and install a custom stock rom instead
Sent from my C5303 using Tapatalk
You can flash the boot.img
But then your phone will be a brick
So I wouldn't recommend it
i didnt had ay problem in flashing boot.img on locked bootloader
panagiotisgr said:
i didnt had ay problem in flashing boot.img on locked bootloader
Click to expand...
Click to collapse
Do you think these people are lying or something?
The whole point of a locked bootloader is that you cant modify kernel - the reason you can only used stock based ROMs.
If you can successfully flash a boot.img then yours is not locked.
Someone please correct me if i'm wrong.
yo-meister said:
Do you think these people are lying or something?
The whole point of a locked bootloader is that you cant modify kernel - the reason you can only used stock based ROMs.
If you can successfully flash a boot.img then yours is not locked.
Someone please correct me if i'm wrong.
Click to expand...
Click to collapse
omg im so sorry i thought i write unlocked. mine is unlocked. not locked. replying while in move not a good idea
panagiotisgr said:
omg im so sorry i thought i write unlocked. mine is unlocked. not locked. replying while in move not a good idea
Click to expand...
Click to collapse
Wow, you almost killed me
As highlighted in posts above and around the forum, it is not possible. This discussion can't go any further so..
Thread closed
Hello everyone, i have one question..i've posted on some posts but didnt get any answer, so i have to start new post.
I have updated my Mi A2, via OTA to Android Pie, after that i have unlocked bootloader and root it (installed Magisk).
And now, i would like to install MIUI 10.
Is it possible and what is the right way for that, has anyone tried?
Thanks!
djoole_milic said:
Hello everyone, i have one question..i've posted on some posts but didnt get any answer, so i have to start new post.
I have updated my Mi A2, via OTA to Android Pie, after that i have unlocked bootloader and root it (installed Magisk).
And now, i would like to install MIUI 10.
Is it possible and what is the right way for that, has anyone tried?
Thanks!
Click to expand...
Click to collapse
Yes it's possible, just follow the guide to install MIUI 10, I did it without problems.
Thanks mate, I have one more question.. How did you get into EDL mode, i have tried many ways but no one was succesfull.
Thakns!
djoole_milic said:
Thanks mate, I have one more question.. How did you get into EDL mode, i have tried many ways but no one was succesfull.
Thakns!
Click to expand...
Click to collapse
In fastboot mode: "fastboot oem edl"
I have tried that but i got message like on screen..
And i have unlocked bootloader, and warning message at boot.
cannot receive hello packet
Hi, how to fix error cannot receive hello packet??
djoole_milic said:
I have tried that but i got message like on screen..
And i have unlocked bootloader, and warning message at boot.
Click to expand...
Click to collapse
Did you unlock the bootloader critical? If not, that's the problem
If you have unlocked bootloader and critical partition flashing, and still have problems to enter EDL mode, try on another PC and USB 2.0 port.
I did it, thanks all for help. I haven unlocked bootloader critical, and that was solution. Thanks one more time! Cheers!
I also want to use MIUI10. can u give me the link where process is written?
i have bough a x4 from ebay without warranty or anyting, the problem that i have. my phone says at the begining your device has loaded another operating system and then just a line of code says verity mode is set to disabled.
but after that the device starts normally, i have tried to lock the device again, but it doesn't work , maybe you have a solution for this problem :the model is XT1900-1 Type:M2997
the bootloader has been unlocked and to be honest relocking has no real benefits. leave it like it is, flash the latest stock image or a custom rom and ignore the bootscreen message.
cango123 said:
the bootloader has been unlocked and to be honest relocking has no real benefits. leave it like it is, flash the latest stock image or a custom rom and ignore the bootscreen message.
Click to expand...
Click to collapse
first, thank you for your response.
do you think, is that a motorola specific issue with corrupt bootloader ?
i guess the firmware of my device is a nougat, will it really help to get rid of a such blemish if i flash it??
doksch84 said:
first, thank you for your response.
do you think, is that a motorola specific issue with corrupt bootloader ?
i guess the firmware of my device is a nougat, will it really help to get rid of a such blemish if i flash it??
Click to expand...
Click to collapse
The message is normal for an unlocked bootloader - it is not corrupt. You cannot get rid of the message when the bootloader has been unlocked, even if it is relocked. Well, you can replace the boot image, but the ”verity" message will remain.
another problem
jhedfors said:
The message is normal for an unlocked bootloader - it is not corrupt. You cannot get rid of the message when the bootloader has been unlocked, even if it is relocked. Well, you can replace the boot image, but the ”verity" message will remain.
Click to expand...
Click to collapse
thank you guys, i just try to flash TWRP image, but it hangs with bootloader logs
getvar is-logical recove
getvar:has-slot:recovery
getvar_maxdown
Sending ....... in the command line? did anyone faces that problem ?