Related
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
Flash a desired firmware from Sammobile. using odin
Make sure that pit file is used
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
you can reconnect it to kies, as it is still on download mode to do recovery like this
http://www.4shared.com/office/koYpRWc1/KIES_update_recovery.html
re you can download a firmware according to your location and flash with Odin
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
are you able to get into download mod or totally not boot up at all
The only solution si to flash a new firmware using odin
Sent from my GT-I9000 using xda app-developers app
Go back to the original India ROM - https://www.fixmystuff.in/FMS_Forum/threads/samsung-galaxy-s-gt-i9000-flashing-to-original-rom.46/
i update my phone using odin with pit file .
now phone not starting any help..
AW: Phone not booting after failed firmware upgrade-urgent
same screen as before?
now phone not booting up at all..
AW: Phone not booting after failed firmware upgrade-urgent
sorry but i'm no expert :/
Does Odin show a connection?
Maybe you can build a so called JIG.
same issue
Hi,
I am in same situation. did it get resolved?
I have GT I90003 which is now not booting and remaining on 'Phone-I-PC' image.
I was using Odin to root but in between cable got disconnected. and now I am nowhere.
Please help how to resolve this problem.
Thanks,
Bhupendra.
see here for firmware n juz change usb port if needed
http://forum.xda-developers.com/showthread.php?p=14933114
or use DDLF1 or DDMF2. Search it using search box in xda.
n dont use i9000 rom for i9003 rom, it will hardbrick ur device, u can search for i9003 post discussiom using searchbox in xda
Sent from my GT-I9000 using xda premium
i have the same problem
i was trying to update my phone and the cable usb move now i have just a black screen with a phone icon + triangle alert+ computer icon. And the problem is that my cellphone doent connect with the computer.
is a samsung s captive. could you help me
Zaddiel said:
i was trying to update my phone and the cable usb move now i have just a black screen with a phone icon + triangle alert+ computer icon. And the problem is that my cellphone doent connect with the computer.
is a samsung s captive. could you help me
Click to expand...
Click to collapse
You have to try again to get it into download mode.
Use Odin for your device model and run it as administrator. If Kies is installed, kill all Kies processes by using Task Manager. Prepare the files under PDA etc. Pull out the battery and hold power button pressed for 1min. Then keep all buttons combo for download mode and insert the battery while pressed (needs some acrobacy skills). If the download mode starts, you can connect your phone and flash firmware again.
tetakpatalked from Nexus 7 flo
thank you
tetakpatak said:
You have to try again to get it into download mode.
Use Odin for your device model and run it as administrator. If Kies is installed, kill all Kies processes by using Task Manager. Prepare the files under PDA etc. Pull out the battery and hold power button pressed for 1min. Then keep all buttons combo for download mode and insert the battery while pressed (needs some acrobacy skills). If the download mode starts, you can connect your phone and flash firmware again.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Thanks it really works
Zaddiel said:
Thanks it really works
Click to expand...
Click to collapse
Great, mate
BTW, hitting the thanks button would do more than words
tetakpatalked from Nexus 7 flo
(... i know, I have to read the whole thread before flashing my mobile. But i think the forums of s5570 , s5570I and s6500 are mixed and new people can get errors.. :silly
Hi , need some help or councils , I´ve get bricked my phone . It doesn´t power up . no light , no sounds, no usb connection.
I tried
-Put it in download mode using Vol down + home +power no appears nothing on screen ,no light , no usb connection.)
-Tried with a jig usb , doesn´t start download mode ,(the jig is ok , I try in samsung galaxy s1 and it´s ok)
-Only have response when i try to get it in recovery mode , (vol up + home + power) nothing appears on screen , but odin detects my mobile.
I can´t flash why are on recovery mode and get freezed.Setup connection.
Sent it to Samsung. It's can't fixed easily.
Nothing more to do,,?, send to samsung.... .
Jefazo2k5 said:
Nothing more to do,,?, send to samsung.... .
Click to expand...
Click to collapse
do you have tried to remove the battery first? let 5 minutes then put the battery
Well there is a chance that you have hardbricked your phone..sending it to samsung will be a better option..
Sent from my GT-S5360 using Tapatalk 2
OK, thank to all
Have you tried this?
forum.xda-developers.com/showthread.php?t=1929525
AW: Flashed S5570 with S5570i rom
But will they help at samsung? I mean, if you flash sth on your phone, you'll lose warranty, so they tell you you shouldn't have done it and it's your fault, won't they?
Sent from my GT-S5570 using xda app-developers app
Masrepus said:
But will they help at samsung? I mean, if you flash sth on your phone, you'll lose warranty, so they tell you you shouldn't have done it and it's your fault, won't they?
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
chances are that they will not find anything
just give it to Samsung care
AW: Flashed S5570 with S5570i rom
dheeraj (dhlalit11) said:
chances are that they will not find anything
just give it to Samsung care
Click to expand...
Click to collapse
XD, that would be funny
Well but you're right, just try it
Exactly happened to me I flashed hyperion8 and my phone is bricked how you described.
I phoned samsung today and told them my phone went off in the middle of a call and will no longer turn on(DO NOT MENTION FLASHING OR ROMs), tried different battery, tried pluging into charge, tried pluggin into computer, tried different charger, phone has never been dropped etc etc
They sending out packaging so can send to Samsung care, they guy said expect it to be returned 7-10 days later.
So happy days
Same here I bricked my phone ....don't remember exactly how gave it ssc didn't mention flashing and stuff and they are noob enough to fix phone for free so having warranty works in the advantage of flashing and all ......luckily my mini had two years warranty but it got over about a year ago and still mini is my main phone so cheer up and give it yo ssc
Sent from my GT-S5570 using Tapatalk 2
Jefazo2k5 said:
-Only have response when i try to get it in recovery mode , (vol up + home + power) nothing appears on screen , but odin detects my mobile.
Click to expand...
Click to collapse
Does your phone still has a warranty?? If it still has a warranty, you can try to bring it up to the Samsung Service Centre..
By the way, excuse me, do you know what the differences of Download and Recovery mode is??
You said that "Only have response when i try to get it in recovery mode , (vol up + home + power) nothing appears on screen , but odin detects my mobile", what does it mean?
If you want to flash a stock-rom via Odin, just boot to download mode, not recovery mode..
guys,, i think my galaxy is gone...
going in detail....
i had rooted my device sometime ago,, working fine.
THEN BY MISTAKE I FLASHED A ROM (made for galaxy y) ON MY GALAXY ACE..!!!
the phone never started after that...
nothing happens ,, only black screen as switched off...
CAN"T BOOT TO RECOVERY OR even BOOTLOADER MODE ( downloading mode)...!!
PLZ PLZ help is my device hard bricked...???
yah ryt its already bricked..if only u could go to download mode thats the only option u can recover ur pone..how about try the jtag for force ur phone to downlaod mode and be ready the files neede like : stock firmware, odin..etc..
I once used the GAce and got the exactly same prob as op. Basically, yes it is bricked, unfortunately, and u should send it to repair.
Sent from my HTC One X+ using xda app-developers app
What is jtag?
I m ur so called noob
Android ADB can help to get ace in download mode or recovery mode with pc help , its command line commands
Ghostking said:
guys,, i think my galaxy is gone...
going in detail....
i had rooted my device sometime ago,, working fine.
THEN BY MISTAKE I FLASHED A ROM (made for galaxy y) ON MY GALAXY ACE..!!!
the phone never started after that...
nothing happens ,, only black screen as switched off...
CAN"T BOOT TO RECOVERY OR even BOOTLOADER MODE ( downloading mode)...!!
PLZ PLZ help is my device hard bricked...???
Click to expand...
Click to collapse
Are you sure you cannot go into the download mode aka ODIN mode?
Volume down+Home button+Power button simultaneously
And if you are not be able to go into it, omg the only solution is to send it to a repair shop where JTAG exist A technician used a JTAG on my Xperia X10 Mini Pro when it got Hardbricked but thankfully, it brought back to life. Goodluck to you
Hi.
My Samsung Galaxy S1 GT-I9000 Problem
By Mistake I've Download In My Phone GT-9003
And Now My Phone Broken Nothing Work
Try To Enter Download Mode And Recovery Mode Never Response
Just Black Screen
And I've Connect My Phone With USB And Try Turn It On
No Response
So What I Have To Do?
Please Help Me
nothing mate, juz UBM, Thats what happen when u flashed wrong ROM. FULL BRICK
Sent from my GT-I9000 using xda premium
Hello,
first i want to excuse me for my bad english, i hope you will understand my problem.
I have a rooted GT-S5830 with Froyo (2.2.1).
The plan was to install CWM and then a custom Rom.
I've downloaded CWM 5.0.2.6 for the Galaxy Ace, renamed the .zip to update.zip (it doesn't work while it was named CWM_XXXXXXX.zip), copied it to SD-Card and installed it via the original Recovery Mode.
The Installation went well, i rebooted the phone and everything was fine.
Now the problem: I can't go to the Recovery Mode.
Every Time I press Home and Power, my Phine stuck at the second SAMSUNG-Logo and, after a few minutes, it boot to the"normal" Mode.
I've tried to do an update via KIES, but my Notebook says that the Phone will not be seen in Download-Mode...
Odin didn't see the Phone (same Problem...Download Mode...)
So... Is there any Idea to restore the Recovery Mode or renew it or... whatever.
Thank you all
greetings
stanse
now everything is broken...
OK,
thank you for thinking about it, now the Phone doesn't boot any more.
It stucks at the first SAMSUNG Logo.
In a german forum i found a .exe which will bring the phone to recover mode, i've tested it and now evrything is broken...
LESSON LEARNED...
Thank you all
stanse said:
OK,
thank you for thinking about it, now the Phone doesn't boot any more.
It stucks at the first SAMSUNG Logo.
In a german forum i found a .exe which will bring the phone to recover mode, i've tested it and now evrything is broken...
LESSON LEARNED...
Thank you all
Click to expand...
Click to collapse
Here is the link on how to install stock Gingerbread rom using odin along with all firmwares. Go to the "Preparations" section and download all the necessary files including drivers. When your notebook cannot detect the phone, its usually the drivers. To go to the download mode, hold Vol Down+ Home + Power button until you see "Downloading..." in the screen.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Do post the result. Hope I Helped
Thank you for your post.
The biggest problem is that the phone will not be shown in download mode, so Odin says that there is no phone connected.
I have tried 3 different driver packages...
The link to Samsung says that the phone (GT-S5830) is too old for letting me download any driver.
I think that everything will work when the phone will be recognized by computer..
Thx
stanse said:
Thank you for your post.
The biggest problem is that the phone will not be shown in download mode, so Odin says that there is no phone connected.
I have tried 3 different driver packages...
The link to Samsung says that the phone (GT-S5830) is too old for letting me download any driver.
I think that everything will work when the phone will be recognized by computer..
Thx
Click to expand...
Click to collapse
Can you tell me what happens when you hold Vol Down+ Home+ Power button?
Then the download mode starts...
It looks different like at my Galaxy S4, but there is written "downloading" in yellow letters
No Samsung Logo before, no sound, no animation...
Hope that this is the right mode...
Sent from my GT-I9505 using xda app-developers app
Sorry for the new post, xda-app won't let me edit the one before...
My Notebook says that the last connected device can't be identificated and that there is a fault in the enumeration if the device (i've tried to translate it from german, even in german i don't know what that means).
Thank you for your help
Sent from my GT-I9505 using xda app-developers app
stanse said:
Then the download mode starts...
It looks different like at my Galaxy S4, but there is written "downloading" in yellow letters
No Samsung Logo before, no sound, no animation...
Hope that this is the right mode...
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
That is the Download Mode of Galaxy Ace alright. All you have to do now is connect to the odin and it should detect the phone. If not please reinstall the drivers. Hope I Helped
I've done exactly what you say nearly hundred times, with different driver packages, different computers, different cables, yesterday, today, at morning, afternoon and evening. I don't know what to do now...
I think that it is a driver fault, but no chance to fix it.
There are lots of problems wich are more important than this...
Thank you for your help, but i think that i need a new way to solve the problem.
Time will tell.
Thx
Sent from my GT-I9505 using xda app-developers app
stanse said:
I've done exactly what you say nearly hundred times, with different driver packages, different computers, different cables, yesterday, today, at morning, afternoon and evening. I don't know what to do now...
I think that it is a driver fault, but no chance to fix it.
There are lots of problems wich are more important than this...
Thank you for your help, but i think that i need a new way to solve the problem.
Time will tell.
Thx
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
simple solution to yr problem. reinstall kies, or if you dont ve it install remember to stay connected to internet,when kies ask if u want to install driver for bada or other models check the box. the next time u connect yr phone in download mode yr drivers will be installed... or if u can get another working ace connect to yr pc to geet the drivers installed.
Ok, first thx for your post...
I need another Ace for testing what you told.
I'll post here when i found one.
Sent from my GT-I9505 using xda app-developers app
Another Ace, another fail...
Next try with Windows XP, hope i will find a computer with XP...
Is there anyone who connected an ace to a linux OS?
Is there a live CD with an OS wich will be
Supported by all necessary programs?
When there will be no solution, than there is another question: WILL IT BLEND???
Sent from my GT-I9505 using xda app-developers app
stanse said:
Another Ace, another fail...
Next try with Windows XP, hope i will find a computer with XP...
Is there anyone who connected an ace to a linux OS?
Is there a live CD with an OS wich will be
Supported by all necessary programs?
When there will be no solution, than there is another question: WILL IT BLEND???
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I don't know what you mean by connecting to Linux. But if you meant using odin in Linux, then well it will not work even with Wine. Wine doesn't work reliably with things that need hardware connections.