[Q] about accessibility to change rom - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi guys
I have a question: I'm on the custom rom ultimate 4.1.2
and I wanted to know can I change my rom to the CM10.1 (4.2.1) and if I dont like it, return to the ultimate ?how ?
Thanks so much cause your help :good:

Use the q&a section for these questions.
Yes you can change to Cm10.1. Instructions are in the rom thread. Before changing boot into recovery and make a backup. Later you can revert back to same rom using the restore feature in Cwm.

nokiamodeln91 said:
Use the q&a section for these questions.
Yes you can change to Cm10.1. Instructions are in the rom thread. Before changing boot into recovery and make a backup. Later you can revert back to same rom using the restore feature in Cwm.
Click to expand...
Click to collapse
Thanks bro

reported
Sent from my GT-N7000 using Tapatalk 2

Related

[Q] Help!! - Jump from ICS Stunner to another ROM

Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
cyberdeception said:
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
Click to expand...
Click to collapse
Just flash Hydracore kernel and you will be good to go for flashing any custom rom.
cyberdeception said:
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
Click to expand...
Click to collapse
Take it easy, you're fine. If you've installed HydraCore it means you're on a safe kernel. Just download pc Odin if you haven't already.
What rom do you want to go to? I'd recommend for safest operation, install gb stock, then look at upgrade but it depends on which rom you want to flash.
Emmc bug is only triggered on stock kernels or under some cwm flashes which most people don't do, so take it easy, you're ok.
Sent from my GT-N7000 using xda app-developers app
cyberdeception said:
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
Click to expand...
Click to collapse
1. Flash hydracore kernel.
2. Reboot recovery.
3. Make sure you are on hydracore kernel.
4. Do what ever you want.
If you still being scare of doing this. Just follow jeetu suggestion. Go back to gb pre rooted rom by using pc odin. Then use mobile odin to flash rooted kernel. After get full root, go recovery and flash cm9. Done.
Sent from my GT-N7000 using xda premium
Re
Thanks for the clarity...
one more thing..
I am now flashing the kernel as we speak to hydracore..
Will i lose root if i need to install the ParanoidAndroid rom..
If not..do i need to go the whole way of installing stock GB and then rooting it and then installing the paranoid rom!..
really appreciate the help friends!..
cyberdeception said:
Thanks for the clarity...
one more thing..
I am now flashing the kernel as we speak to hydracore..
Will i lose root if i need to install the ParanoidAndroid rom..
If not..do i need to go the whole way of installing stock GB and then rooting it and then installing the paranoid rom!..
really appreciate the help friends!..
Click to expand...
Click to collapse
Flashing Hydracore doesn't affect root, you will be rooted and can flash PA directly using cwmr after flashing hydracore.
cyberdeception said:
Thanks for the clarity...
one more thing..
I am now flashing the kernel as we speak to hydracore..
Will i lose root if i need to install the ParanoidAndroid rom..
If not..do i need to go the whole way of installing stock GB and then rooting it and then installing the paranoid rom!..
really appreciate the help friends!..
Click to expand...
Click to collapse
I would recommend you go with the long route of installing stock GB first. I saw the installation instructions of PA (i'm not sure though if that's an outdated tutorial or if it's still the current one to date), but it explicitly tells you that you need to be on stock GB before installing PA. I'm open to corrections though from those who have PA already installed but personally,it would be good if you start from scratch and work your way up to eventually install PA.
That's just my advice to you.
Hi,
I got a question, I have flashed the kernel to the hydracore one, have root and CWM but I am still on the ICS stock ROM. Is it possible to go directly to paranoid one without the need to downgrade to GB ?
By the way, can you provide a link to dl paranoid ?
Thank you in advance for your answer.
zone.art said:
Hi,
I got a question, I have flashed the kernel to the hydracore one, have root and CWM but I am still on the ICS stock ROM. Is it possible to go directly to paranoid one without the need to downgrade to GB ?
By the way, can you provide a link to dl paranoid ?
Thank you in advance for your answer.
Click to expand...
Click to collapse
Yeah you can flash paranoid straight... Download GApps and the rom from original development section.. Remember perform all the wipes before flashing
Enviado desde mi GT-N7000 usando Tapatalk 2
Deleted
msedek said:
Yeah you can flash paranoid straight... Download GApps and the rom from original development section.. Remember perform all the wipes before flashing
Enviado desde mi GT-N7000 usando Tapatalk 2
Click to expand...
Click to collapse
Ok but as I can see the ROM is only 160 MB as other ROM (stock for example are almost 700MB), I don't want to lose some essential functionalities by flashing to an incomplete ROM. How to know which file to dl from the Gapps is there on this one that you have the 500 MB missing ?
Thanks again and sorry for my poor knowledge
All aosp roms are that size.. It's a completely different experience as aosp roms are pure Google experience with no Samsung or any other retailers custom launcher and bloat..
It depends on Wich functionalities do you have in mind?
Enviado desde mi GT-N7000 usando Tapatalk 2
Ok thanks so they put a lot of useless heavy crap inside I guess
I am still struggling to have a download link for a stable zip file to flash, is it possible to have a link ?
Thank you
I've downloaded the rom in the past no issues.. Don't know about mirrors.. Maybe ask there in the ParanoidAndroid threat
Enviado desde mi GT-N7000 usando Tapatalk 2

[Q] mod on samsung galaxy note [03-03-2013] JZO54K.N7000XXLSZ.zip (872.43MB)

hi
i am using [03-03-2013] JZO54K.N7000XXLSZ.zip (872.43MB) base on thaidai stock deodexed rom and rooted with cwm 6()n7000 v4.63 safe stock kernel.. otherwise i have no problem with this rom. i want to know can i flash add mod by eybee like inkeffect, 4 way reboot etc. if yes then how?
help pls
thanks
amanverma17 said:
hi
i am using [03-03-2013] JZO54K.N7000XXLSZ.zip (872.43MB) base on thaidai stock deodexed rom and rooted with cwm 6()n7000 v4.63 safe stock kernel.. otherwise i have no problem with this rom. i want to know can i flash add mod by eybee like inkeffect, 4 way reboot etc. if yes then how?
help pls
thanks
Click to expand...
Click to collapse
Yes, you can. You need to install the different zips (I remember three packages from eybee) in recovery.
Follow the instructions in eybee's thread. Please make a backup of your system in recovery first - if something goes wrong, you can restore it.
thanks
thanks thaidai for prompt reply

[Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?

Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
Click to expand...
Click to collapse
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
Edit: ops I just saw you're not Italian
Click to expand...
Click to collapse
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
ThaiDai said:
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
Click to expand...
Click to collapse
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Thanks
Bad-Pixel said:
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for the answer ! I just installed successfully the Italian version of JB !
PD: No, i'm from Buenos Aires, But i'm an Italian Citizen, i have double citizenship...
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I will keep that in mind... But i want to install CM10.1 in mi N7000, my cousin(he has a Galaxy S3 with Philz 4.88.5 and CM10.1) he recommended it to me... I really want the performance/interface given by CyanoGen Mod...
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
Click to expand...
Click to collapse
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Really? Maybe i read wrong ! But there is written that Philz 4.88.5 supports CM10.1 and GT-N7000...
Read This thread http://forum.xda-developers.com/showthread.php?t=2002953
Someone in http://www.Taringa.net recommended me to use Crash Rom with Philz kernel ! And not only one person did that !
What Do You Think? I'm very confused about Android(Kernel/Rom/Recovery)...
PD: I really miss my iPod Touch 4g ! iOS it's heaven for me hahahaha
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
But dude, that topic is about the galaxy s3 (i9300) and talking about a custom recovery (with few words, the menu from where you install new roms or wipe your note) and not about a kernel. Plus, Dev Crash left our note community some months ago, and his last rom is a jb leak rom Samsung, so I don't recommend you to install it. It's too much old now. Btw, if you wanna some advice about all this story (kernel recovery and other maybe) I advice you to:
First search for some already opened thread, and if you will not any answer to your questions, open a new thread
Sent from my GT-N7000 using xda premium
Auch ! Sorry man ! I had a confusion !
But if you read the Thread there says that it's compatible with N7000... So, i can install Philz 4.88.5 Recovery on my Note !
Reading in the web i found a tutorial of the CM10.1 Official for N7000, i think i will use this ROM in my Note ! What do you think? Any advice?
In the page of CM i found the tutorial... I can't put the link here...
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
Click to expand...
Click to collapse
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
nokiamodeln91 said:
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
Click to expand...
Click to collapse
I said Philz Recovery... With CM10.1 ROM and Kernel !
which Philz recovery are you referring to ? Temp one?
nokiamodeln91 said:
which Philz recovery are you referring to ? Temp one?
Click to expand...
Click to collapse
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
MarianoQT said:
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
Click to expand...
Click to collapse
Dont you read? Phil touch recovery + stock kernel is only for touchwiz rom a.k.a stock rom. No cm9 no cm10 or cm10.1. If im not mistaken speedmod kernel is using phil recovery but no touch features it also for stock touchwiz rom. Correct if im wrong
Sent from my GT-N7000 using xda premium
struk in boot
Bad-Pixel said:
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
altanole said:
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
Click to expand...
Click to collapse
Ok resolved
I installed philzkernal matching to my rom via Odin and now is all fine
Sent from my GT-N7000 using xda app-developers app

[Q] Mixed ROM and Kernel

Hi i'm new here, just installed Carbon Rom JellyBean v1.7 Release and the kernel is from the ROM itself (3.0.31-CM-g209ebe6)
Question is:
1) Can i install SpeedMod N7000 Jelly Bean Kernel on that ROM?
2) If yes, Can this ROM be installed with ANY N7000 Kernel?
Big thanks and sorry if i'm being too noob
And excuse my english, too
No, the speedmod is for the Touchwiz based [TW] ROMs. Carbon ROM is CyanogenMod [CM] based. So not all kernels can be installed on any ROM, when u read a kernel thread, you'll have the compatibility of the kernel with ROMs written in that. Never flash any kernel on an incompatible ROM, may lead to a brick.
Oh i see. So is it okay if i install CM9 Kernel on a CM10.1 ROM?
I am not sure about tthat, but better not flash it on CM10 as most likely it won't work, CM 10 is a totally new version. Better not try it.
No. You cant flash different version kernel on different roms. CM10.1 only supports CM10.1 kernels. Currently there are NX kernel and Asylum kernel for this.
Remember never flash different kernel on different rom. This will brick your device.
Alright thanks. Any recommendations of kernel that can do over clock and gaming ? Currently my Real Racing 3 just plays at 12fps.. That's unplayable for me. Thanks before
Sent from my GT-N7000 using Tapatalk 2
NX kernel for CM based ROMs, check out the various kernels in the Android Development thread... Many CM based ROMs will have the CPU frequency option in the performance control menu. Careful, overclocking can have adverse effects, may fry up the motherboard...
Thanks, that kernel should have increase my performance right?
But signal problem was reported if i'm not mistaken. So i'm a bit confused as i do a lot of phone calls.
http://forum.xda-developers.com/showthread.php?t=2192893&highlight=nx+kernel Read the features of the kernel in this thread. No there wont be any connectivity issues, NX kernel or the CM kernel are stable ones. If there are some issues, then flash a stable version of those kernels.
OK, when the process is successful, will i lose my data?
If you just flash the kernel then no you won't. You lose the data only if you do a Factory reset (Data wipe from the recovery). You have already installed Carbon ROM now just go to recovery and flash the .zip kernel file.
Then what about if i want to Change ROM , but it requires wiping data. If i restore the CWM backup , then it'll get to the previous ROM, no?
raihan4 said:
Then what about if i want to Change ROM , but it requires wiping data. If i restore the CWM backup , then it'll get to the previous ROM, no?
Click to expand...
Click to collapse
Yes, you can backup and restore CWM
Galaxtus said:
Yes, you can backup and restore CWM
Click to expand...
Click to collapse
NO, i mean this:
I have ROM A , i backup via CWM then i flash ROM B. To flash , i must wipe data. Then i wipe data.
If i restore backup from CWM, will i get ROM A or still ROM B ?
excuse my poor english
raihan4 said:
NO, i mean this:
I have ROM A , i backup via CWM then i flash ROM B. To flash , i must wipe data. Then i wipe data.
If i restore backup from CWM, will i get ROM A or still ROM B ?
excuse my poor english
Click to expand...
Click to collapse
If your ROM A is completely backed up. Yes after wiping data and restoring you will get ROM A and ROM B will be completely gone
Galaxtus said:
If your ROM A is completely backed up. Yes after wiping data and restoring you will get ROM A and ROM B will be completely gone
Click to expand...
Click to collapse
So to backup contacts apps etc.. Can I use ROM Toolbox's app manager? Thanks
Sent from my GT-N7000 using Tapatalk 2
Yes you can, back up contacts using google account or even via apps like go backup. Apps back up can be done via Titanium Backup, it is very convenient.
Well then thanks guys , really appreciate your help
Sent from my GT-N7000 using Tapatalk 2
raihan4 said:
NO, i mean this:
I have ROM A , i backup via CWM then i flash ROM B. To flash , i must wipe data. Then i wipe data.
If i restore backup from CWM, will i get ROM A or still ROM B ?
excuse my poor english
Click to expand...
Click to collapse
Rom a.
Sorry, bit late off the mark, didn't see the second page :sly:
Sent from my GT-N7000 using xda premium

[Q] Best Running Rom These days?

Hey everyone!
I am running DDLSC Stock ROM (un-rooted) on my Galaxy Note N7000. I want to try custom ROM's on this device and firmware. Can you please answer these queries for me?
What ROM should I install?
Is it possible to install a ROM on this Firmware?
Do I need to Root my device?
Thank you for your help!
1 Try cm 10.2 as a start.
2 Yes..why not.
3 Of course you need to. Use philz kernel as per your build. I see it's ddlsc so you can flash philz_lsc and gain root. Just make sure to use the appropriate version of philz kernel as per your build. Detailed instructions are on the original thread. Just do a little search.
Sent from my GT-I9105 using xda app-developers app
Hi,
if you want Tablet feeling, i advice you N8XT Rom here: http://forum.xda-developers.com/showthread.php?t=2366175
It's very smooth and fast with C.O.H Kernel. I'm using it since 2 weeks. GREAT. It's stable and also has a Touchwiz UI.
But first flash a Philz Kernel via Odin.
Thank you for the suggestions!
I am installing CM 10.2 as of now.. Will then try out a few ROMS
Thanks for the help everyone!
Thread closed as its a Best ROM thread.

Categories

Resources