Hey, im a noob so heres my problem, ive experimented alot on my p1000 and one thing that bothers me alot was the video playback which was either choppy or laggy on CM so ive always restocked it back to GB. I think the solution for this is to use another kernel other than CwM. IS there any other kernels that i could try, the ones that could result in very good hd playback once im on a custom rom?
Sent from my GT-P1000 using xda app-developers app
First kernel and CWM are two different things CWM is one of the recovery mode.
For HD videos... You can use CM 10 or 9 or give AOKP SGT7 a try.... They are much stable...
Sent from Android
Ok so kernel and cwm are different i get it, but could you tell me how to install the heimdall kernel on p1000 step by step? Ive read from somewhere that it could improve hd video playback. And ive already used cm 9 stable and there is no cm 10 stable yet before but the problem persisted. . .
Sent from my GT-P1000 using xda app-developers app
Heimdall is a tool to flash ROM/kernel.
It is not a kernel. You read wrongly.
Find the same article and read again with the new understanding of what heimdall/kernel/cwm are, and see if you can make out what is that that was recommended.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Heimdall is a tool to flash ROM/kernel.
It is not a kernel. You read wrongly.
Find the same article and read again with the new understanding of what heimdall/kernel/cwm are, and see if you can make out what is that that was recommended.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yes you're right, I kinda read wrong, the article said about the humberos, now that is a kernel right? I've installed it, and I realized that its a modified version of CwM but the real question is that do I have to keep using the firmware from humberos or could I use other custom roms like SGT7 aokp or Cyanogenmod?
It should be fine using it with other ROMs as long as both are from the same android version
Sent from my Galaxy Nexus using Tapatalk 2
Humberos is the guy's nickname. His ROM and kernel may also be referred to as Humberos.
But he made kernels back from Gingerbread days.
So we better know which one you flash.
You can use his kernel, for example his JB kernel in, in cm10 and aokp jellybean.
you can use his ICS kernel in AOKP ICS, CM9, and so on.
For CM10.1 it is yet a different kernel.
And it is not just different cwm, the kernel itself is different.
Sent from my GT-P1000 using xda app-developers app
Well ur explanation makes sense, I installed humberos and then humberos's cm 10.1 but the problem was with the camera so I decided to install aokp Sgt7 jb and then the aokp logo goes into boot loop. I then powered off, did the power + volume up and realised that I had installed the cyanogenmld cwm over the humberos. Now what to do?
Sent from my GT-P1000 using xda app-developers app
bisharat said:
Well ur explanation makes sense, I installed humberos and then humberos's cm 10.1 but the problem was with the camera so I decided to install aokp Sgt7 jb and then the aokp logo goes into boot loop. I then powered off, did the power + volume up and realised that I had installed the cyanogenmld cwm over the humberos. Now what to do?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
That's because you installed 4.1.2 ROM with 4.2.1 kernel... It is better for you I'd you restock then update again... And please please please install the ROM with it's kernel because both of them are good AOKP or CM
Sent from my Galaxy Nexus using Tapatalk 2
Actually from the description, installing aokp sgt7 jb after running cm10.1 should not be an issue as long as you do the 3 wipes (cache, data, dalvik-cache).
aokp sgt7 will replace the cm10.1. But nevertheless, if it is still looping, do the restock.
They are all using CWM 6.x nowadays, it doesn't really matter, but the kernel has to be for the right ROM.
BTW, too many people think cm10.1 is just a little update from cm10.
It is not. It is a completely new framework. Treat it as a different ROM.
So all I gotta do is restock back to GB, root GB, install the humberos cm 10 kernel from SD after wiping everything, and then install aokp Sgt 7 or cm 10 right?
Sent from my GT-P1000 using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
salahmed said:
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Ok the instructions are well understandable but alotta files to download and a hell of lotta instruction manual to read. Its gonna take me a day to absorb all that and then start the "surgery" of my patient the p1000. Thanx again for the post though, will let u now through this post if any more queries. . .
Sent from my GT-P1000 using xda app-developers app
salahmed said:
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
ok well ive flashed the overcome kernel and then I flashed the overcome 4.1 aka the overcome experience and its actually quite fantastic. On my way to flash JB from CM. btw do I have to register the divx licenses? as well as other licenses?
ok im using overcome 4.1.0 and its fabulous. but before I go towards JB, can someone pls explain how to wipe the 3 caches using the overcome kernel, since its quite new to me? also when flashing to cm jb, do I have to clear the caches and then install from internal sd card? Is that how I upgrade it, not clean install it?
ok so I flashed aokp and the big problem is that it installs cwm over the overcome kernel and so the video problem still persists. Isnt there a way to remove the cwm recovery from the aokp rom?
You got it all wrong.
in P1000, recovery is included in the kernel.
Overcome kernel has cwm 5.0
Aokp kernel and cm kernel has cwm 6.0.
Wipe cache and wipe data are there in main menu of cwm.
Wipe dalvik cache is in Advanced menu.
You have overcome ROM 4.1, boot to cwm and flash aokp a few times until it is done, then flash gapps.
Reboot.
There is never a need to remove cwm. Where do you read such idea?
Sent from my GT-P1000 using xda app-developers app
priyana said:
You got it all wrong.
in P1000, recovery is included in the kernel.
Overcome kernel has cwm 5.0
Aokp kernel and cm kernel has cwm 6.0.
Wipe cache and wipe data are there in main menu of cwm.
Wipe dalvik cache is in Advanced menu.
You have overcome ROM 4.1, boot to cwm and flash aokp a few times until it is done, then flash gapps.
Reboot.
There is never a need to remove cwm. Where do you read such idea?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I didn't read it, I just thought about it. Anyhow, I flashed aokp a few times just like you said, and flashed gapps (obviously), but result is still the same. I'll post a video ASAP on the video playback performance that I'm still complaining about...
Video is a kernel/codec related problem.
It is not logical to link it to gapps or cwm.
Sent from my GT-P1000 using xda app-developers app
Ok so its a kernel/codec problem, what to do about it?
Sent from my GT-P1000 using xda app-developers app
Related
Hello Galaxy S Community, I have just purchased a Galaxy S and its coming with android 2.1 stock. I wanna know, whats the fastest and most stable rom for the Galaxy S and whats the fastest and most stable kernel for the Galaxy S?
Edit: I just updated it to 2.3.3 JVN Via Samsung Kies but I am no noob with odin, i just wanted to update via kies .
For stock rom the best kernel is the Sempahore kernel: http://forum.xda-developers.com/showthread.php?t=1112908
Form CM7/MIUI you can you the glitch kernel: http://forum.xda-developers.com/showthread.php?t=1041532
There are most of kernels, but for stock rom the semaphore kernel is better
flowerpower84 said:
For stock rom the best kernel is the Sempahore kernel: http://forum.xda-developers.com/showthread.php?t=1112908
Form CM7/MIUI you can you the glitch kernel: http://forum.xda-developers.com/showthread.php?t=1041532
There are most of kernels, but for stock rom the semaphore kernel is better
Click to expand...
Click to collapse
I definately dont wanna stay on stock touchwiz cause i dont like the interface. What do you think about the 4.0.4 roms? Does all the hardware work or is it in alpha/beta? What about ICS Kernels? Should i flash ICS or flash a Gingerbread rom (CM7, etc)? Sorry about all the questions but there are so many roms/kernels that I just have no clue which one to use.
You could try latest CM9 nightly with Semaphore 1.2.2 or latest mnics or Devil kernel.
After 3 or 4 circle battery charges I'd think it will offer to you good performance and good battery life, but I'm supposing it.
Try them and after that tell us about
I hope it helps you!
I m using ics333 no bugs, good ram management, good battery life my first rom after buying galaxy S
Sent from my GT-I9000 using XDA
For GB, jw6+midnight kernel
Ive download slim ICS (samsung base, device essentials (i9000) and slim gapps). how do i install as it has no odin.tar, just update.zip and im on stock gb so i have no cwm. i tried downloading cwm from here:http://forum.xda-developers.com/showthread.php?t=1089989 but the ezodin link is dead so i have no way of installing. also.
alb3rtt said:
Ive download slim ICS as it seems to include everything i want. how do i install as it has no odin.tar, just update.zip and im on stock gb so i have no cwm. i tried downloading cwm from here:http://forum.xda-developers.com/showthread.php?t=1089989 but the ezodin link is dead so i have no way of installing.
Click to expand...
Click to collapse
Here is my ezodin kit, unzip, read .txt
http://db.tt/MOGZx01S
Sent from my GT-I9000 using xda premium
should i install cm9 first, then slim ics?
alb3rtt said:
should i install cm9 first, then slim ics?
Click to expand...
Click to collapse
Yes.
alb3rtt said:
should i install cm9 first, then slim ics?
Click to expand...
Click to collapse
Full instructions on slim site......see link in my sig
Sent from my GT-I9000 using xda premium
do i have to flash semaphore kernel after slimics or does cm9 (or slimics) come with semaphore kernel in it?
i downloaded you ezbase 4. i extracted it and read the guide. if i do this, will it install cwm for gb? im on stock 2.3.3 (jvn).
alb3rtt said:
do i have to flash semaphore kernel after slimics or does cm9 (or slimics) come with semaphore kernel in it?
i downloaded you ezbase 4. i extracted it and read the guide. if i do this, will it install cwm for gb? im on stock 2.3.3 (jvn).
Click to expand...
Click to collapse
Flash the ROM with.pit, let it reboot then boot back to download, flash the root kernel, let it reboot and you are on rooted ROM, copy nightly, base, essentials and gapps to sd card, then follow instructions for flashing sequence, after, if you want semaphore download and flash that, make sure you use the s version as slim has the large ram patch
Sent from my GT-I9000 using xda premium
slaphead20 said:
Flash the ROM with.pit, let it reboot then boot back to download, flash the root kernel, let it reboot and you are on rooted ROM, copy nightly, base, essentials and gapps to sd card, then follow instructions for flashing sequence, after, if you want semaphore download and flash that, make sure you use the s version as slim has the large ram patch
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
thanks, thats much clearer now sorry for the headache but im a noob in the galaxy s forum
alb3rtt said:
thanks, thats much clearer now sorry for the headache but im a noob in the galaxy s forum
Click to expand...
Click to collapse
No problem, any difficulty, just post back
Sent from my GT-I9000 using xda premium
when i tried to install the latest cm9 nightly in recovery (following the instructions) , i got E:cant open (location of cm9 nightly). should i re download it ?
i dowloaded the one at the top cm-9-20120617-NIGHTLY-galaxysmtd.zip .
alb3rtt said:
when i tried to install the latest cm9 nightly in recovery (following the instructions) , i got E:cant open (location of cm9 nightly). should i re download it ?
i dowloaded the one at the top cm-9-20120617-NIGHTLY-galaxysmtd.zip .
Click to expand...
Click to collapse
Sounds like a bad download, so yes, try again
Sent from my GT-I9000 using xda premium
slaphead20 said:
Sounds like a bad download, so yes, try again
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Did you select instal zip from recovery, or the update zip option?
Sent from my GT-I9000 using xda premium
slaphead20 said:
Did you select instal zip from recovery, or the update zip option?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
i rebooted into recovery, and pressed install zip from sd, then select update.zip.
alb3rtt said:
i rebooted into recovery, and pressed install zip from sd, then select update.zip
Click to expand...
Click to collapse
i redownloaded it and did the install procedure and it came up again. (cant open cm9 update). my cwm is cwm 3, might that be the problem? (i did everything like you ezbase guide said)
Hello,
Right now, my Galaxy Note is running a rooted version Samsung ICS:
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Kernel Version: 3.0.150N7000XXLPY-CL474507
Build Number: IML74K.XXLPY
I'd like to try CM10, but I've been reading a lot of issues from people flashing ROMs from Samsung ICS. What would be the safest way to install CM10? Should I downgrade to a Samsung Gingerbread ROM first? What procedure would you guys recommend?
Thanks,
Tiago
It is important to downgrade first to samsung stock GB.
http://www.youtube.com/watch?v=JO93XJ2C8pc&feature=plcp
Follow his instructions to a tee and you should be good to go.
The youtube video is courtesy of aphroditelikesme(all credits to the dude, as I constantly subscribed to his youtube videos)
Don't forget to hit the 'Thank's button if I have helped you in some way or the other.
Thanks a lot!
But should I flash a stock Samsung GB ROM or a rooted GB ROM? Should I use CWM or Odin to flash GB?
tiagobt said:
Thanks a lot!
But should I flash a stock Samsung GB ROM or a rooted GB ROM? Should I use CWM or Odin to flash GB?
Click to expand...
Click to collapse
you can flash the pre rooted GB rom by Chainfire...then flash the cf kernel....do a full wipe and then just flash CM10. Find the procedure here:
http://forum.xda-developers.com/showthread.php?t=1331784
Go to section 1.3 and u find the way....hope it helps....:good:
Flash it to stock GB
here's the other link for the video.. again all courtesy to the creator of that video. http://www.youtube.com/watch?v=jr3DDEh8vyc
There's also the links of the ROM (choose checkROM GB or RocketROM) and the kernel you need to download.
Just follow his video bud, (I'm following his video for flashing roms and I never miss going back to this video to downgrade to GB)
Cheers!
I see. So flashing Abyss kernel from Samsung ICS (LPY kernel) using CWM is actually safe? I just want to be sure because I've seen many people advising not to use CWM at all if you are on a Samsung ICS ROM.
abysskernel is not an infected kernel, that is why mostly when your going to downgrade to gingerbread.. most flashers will tell you to flash first to abysskernel then flash the GB rom after.
letters_to_cleo said:
abysskernel is not an infected kernel, that is why mostly when your going to downgrade to gingerbread.. most flashers will tell you to flash first to abysskernel then flash the GB rom after.
Click to expand...
Click to collapse
OK, I flashed Abyss kernel (worked fine), rebooted recovery, made a full wipe, flashed Rocket ROM and rebooted the system. I see the boot animation, but after that, nothing happens (blank screen). I've waited over 5 minutes, but the ROM doesn't boot. Anything else I can try?
I'm f*cking tired of explaining this over and over again...MY GOD!! You could've just read the CM9 installation instructions, CHECKED OUT THE STICKIES, ANYTHING LIKE THAT!
THE ONLY 100% SAFE WAY TO GET RID OF AN INFECTED KERNEL IS TO FLASH TO GB THROUGH PC ODIN!! Why the F*CK does everyone prefer to flash abyss and take that risk...!?
IF!! You're confident that RocketRom flashed correctly, you could probably full wipe (AGAIN) from recovery (you'd be on a safe kernel) and that should solve your problem...
Wait for a 2nd opinion though...
eug3n91 said:
I'm f*cking tired of explaining this over and over again...MY GOD!! You could've just read the CM9 installation instructions, CHECKED OUT THE STICKIES, ANYTHING LIKE THAT!
Click to expand...
Click to collapse
Then don't reply, you pud.
Just flash a safe kernel then flash CM10.
Sent from my GT-N7000 using Tapatalk 2
trell959 said:
Just flash a safe kernel then flash CM10.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot!
I reflashed Abyss kernel, did a full wipe and installed CM10 right away. It worked just fine! CM10 is working quite well, I'm really impressed!
You guys got me worried for a second. I guess I just had a bad download of Rocket ROM after all.
tiagobt said:
Thanks a lot!
I reflashed Abyss kernel, did a full wipe and installed CM10 right away. It worked just fine! CM10 is working quite well, I'm actually impressed!
You guys got me worried for a second. I guess I just had a bad download of Rocket ROM after all.
Click to expand...
Click to collapse
Glad it worked. Going back to GB is just a myth. If you have a safe kernel to flash from, then use it.
Sent from my GT-N7000 using Tapatalk 2
I know I shouldn't be busting into another's threads but I have a same sort of question.
@tiagobt I hope you don't mind.
Is SpeedMod K3-11 a safe kernel to flash a custom ROM from? I'm running on stock ICS 4.0.3.
Sent from my GT-N7000 using XDA Premium HD app
aurator said:
I know I shouldn't be busting into another's threads but I have a same sort of question.
@tiagobt I hope you don't mind.
Is SpeedMod K3-11 a safe kernel to flash a custom ROM from? I'm running on stock ICS 4.0.3.
Sent from my GT-N7000 using XDA Premium HD app
Click to expand...
Click to collapse
Yes.
Sent from my GT-N7000 using xda app-developers app
i dont know if im intruding too.....
but can we flash a CM9 or CM 10 rom from a speedmod ics kernel on a TW custom ics rom ?
rraaka said:
i dont know if im intruding too.....
but can we flash a CM9 or CM 10 rom from a speedmod ics kernel on a TW custom ics rom ?
Click to expand...
Click to collapse
Yes.
Sent from my GT-N7000 using XDA Premium HD app
post number 744 CM10 thread official preview
wonder which kernel he used ...
Hi Guys... So I have flashed to CM10 on my Note... Running very well.... Does anyone know where I can get the SamsungApps store from?... I've tried various ones from here but cannot seem to get them to work... I've tried the links from below thread but doesn't work... any help would be great.
http://forum.xda-developers.com/showthread.php?t=1632639&page=6
dmonuk said:
Hi Guys... So I have flashed to CM10 on my Note... Running very well.... Does anyone know where I can get the SamsungApps store from?... I've tried various ones from here but cannot seem to get them to work... I've tried the links from below thread but doesn't work... any help would be great.
http://forum.xda-developers.com/showthread.php?t=1632639&page=6
Click to expand...
Click to collapse
All Samsung apps require touchwiz framework and will not run on cm based roms.
Sent from my GT-N7000 using xda premium
I have stock ICS 4.0.4 rom and I want to root
my Note and flash to Cyanogen ROM or paranoid rom.
1 question: Will I be able to flash using Philz Cwm6 Kernel, or should I use other Kernel?
2. Does a stock ICS rom is a peoblem flashing to Jelly Bean Cyanogen or is the kernel which is important for flashing?
P.S Sorry if I wrote something because I'm still noob on phone modding.
Sent from my GT-N7000 using xda app-developers app
just go to install a safe kernal here for ur ICS4.0.4 http://forum.xda-developers.com/showthread.php?t=1901191
my advise is do a backup using the safe kernal b4 flashing any roms it might help u in case something when wrong.
if u really don't know how to flash CM u can go find a rom manager it might be the easiest way for noob.
Flashing cm requires first flashing a cm 10 or 10.1 kernel, have a look in chasmodo's kernel repository in the stickies somewhere for cm based kernels.
Doesn't matter what rom you're on, you're right it's the kernel that's the important part.
Also if flashing cm base, make sure you perform full wipes before and after flash for best stability.
Sent from my GT-N7000 using xda premium
Thanks for imformation
That really helped
Sent from my GT-N7000 using xda app-developers app
ReiZona said:
Thanks for imformation
That really helped
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Use the thanks button.
Sent from my GT-N7000 using xda premium
If I flash Hydracore Kernel then will i be able to flash CM?
ReiZona said:
If I flash Hydracore Kernel then will i be able to flash CM?
Click to expand...
Click to collapse
No, you need a specific cm kernel. Otherwise you'll face boot loops.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
No, you need a specific cm kernel. Otherwise you'll face boot loops.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I just don't understand one thing. Now I'm sitting on Philz 3.99 safe Kernel and stock ICS 4.0.4 rom . If I flash CM9 Kernel from chasmodo Kernel repository then should I flash to CM ?
SpyderTracks said:
No, you need a specific cm kernel. Otherwise you'll face boot loops.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
If i flash using CM9 Kernel but on stock ICS 4.0.4 ROM, will it work?
ReiZona said:
If i flash using CM9 Kernel but on stock ICS 4.0.4 ROM, will it work?
Click to expand...
Click to collapse
You won't be able to boot into ics, but once you've flashed cm kernel, then reboot into recovery and flash CM rom and then gapps, then do 3 wipes before boot.
Sent from my GT-N7000 using xda premium
ReiZona said:
If i flash using CM9 Kernel but on stock ICS 4.0.4 ROM, will it work?
Click to expand...
Click to collapse
Philz has fixed th error 7 on the 3.99 release. So you can go ahead and do the formats and flash the cm rom. There is actually no need to flash the th cm kernel first.
I have done it myself a couple of days ago
i always used OASP ROMS mostly of PAm very good but now i did see a touchqiz rom online with multiple windows support etc. I sure wanne give it a try. Does anyone know which ROM is stable and safe wiht futures like this:
Also, im on ParanoidAndoird with PIE, and on utackas kernal. Can i just wipe rom and flash trough cwm or is it safer to get back to GB and then reroot and thenm flash with cwm?
thnx in advance
utackas and cm kernels are safe. Try Ultate XXLSC v.5.1 by joosh3.
Sent from my GT-N7000 using xda app-developers app
..
TheNoticer said:
utackas and cm kernels are safe. Try Ultate XXLSC v.5.1 by joosh3.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
mm had my eye also on that rom, seems good, pictures added and updated frequently, so just do full wipe cache dalvik and install this rom? then flash philzz?? or stay at rom stock kernal? im pretty new with touchqiz roms and i also not sure if XXLSC can be flashed on my n7000? does it have any reason why that is in the title or can i just flash?
TheNoticer said:
utackas and cm kernels are safe. Try Ultate XXLSC v.5.1 by joosh3.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
nevermintg didnt reade the op first
The kernel you're flashing before installing Rom doesn't matter since with v4 will be replaced by PhilZ 3.1 for XXLS7
after i download and flash the official cm10 stable version wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd from stock gingerbread 2.3.3 using Semaphore's ClockworkMod Recovery it stucked at the cm logo. anyone can help?
u really doesnt read first. rite mate?
Sent from my GT-I9000 using xda app-developers app
compacity said:
u really doesnt read first. rite mate?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I did read actually , tried reflash the cm10 more than 50times and wipe system/cache and dalvik many times but it still didnt work at all, just now i tried it again and guess what it boot into cm10 finally.
If u read, flashing from froyo or GB need to go through da step from CM7 (stock GB) > CM9 (ICS flash twice as phone memory repartition) > CM10/10.1 (JB also flash twice)
compacity said:
If u read, flashing from froyo or GB need to go through da step from CM7 (stock GB) > CM9 (ICS flash twice as phone memory repartition) > CM10/10.1 (JB also flash twice)
Click to expand...
Click to collapse
well it worked now without flashing cm7 and cm9. By the way, the install guide at wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd said The install guide assumes the Galaxy S is running Android 2.3 at the important notes so i just followed the instruction only, flash straight from stock gm to cm10 worked like a charm now.
hojianming said:
well it worked now without flashing cm7 and cm9. By the way, the install guide at wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd said The install guide assumes the Galaxy S is running Android 2.3 at the important notes so i just followed the instruction only, flash straight from stock gm to cm10 worked like a charm now.
Click to expand...
Click to collapse
They really assume that you're running 2.3.6. People have had problems with flashing custom roms from any oter version (especially 2.3.3)
Sent from my GT-P7510 using Tapatalk HD
Oic, luckily mine on stock gb 2.3.6, so it worked for me
Sent from my GT-I9000 using xda app-developers app
hojianming said:
Oic, luckily mine on stock gb 2.3.6, so it worked for me
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Maybe not in ur next time.....