Database Develop

[Q] HELP! bircked note

hello everyone
my friend bricked his note and i don't know what to do for him, my friend has no exper experience, he did a restore on a nonsafe kernel
his phone is semi bricked (if not fully bricked), i tried using odin to flash a stock rom (gb then ics) but had no luck and proccess stops at "NAND write start", i tried only to flash a kernel which was abyssnote but also got stuck on "NAND write start" and i tried to use the pit file from this post (http://forum.xda-developers.com/showthread.php?t=1667886) with a stock rom and with re-partition checked on odin and now it is stuck on:
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
please help me as the phone has been stuck on this state (pit file way) for over 80 minutes
waiting for your answer...

i unpluged my phone now and i am trying a custom pit file (N7000_16GB_Q1_20110914--patched--brick-between-281-and-3770-MB--FACTORYFS-moved-by-3328-MiB.pit) after leaving my phone for up to 2 hours and with no progress using N7000_16GB_Q1_20110914-stock.pit
file, hope i can revive my friend phone and please try to point me for any solution i can try.

Check your connection. Usually if bricked the process will start ok but halt at factory.fs. Try with a different usb cable, make sure it's in a mobo usb port not front one.
Pit files should be a last resort. I don't think it's bricked personally. Does it power on at all?
Sent from my GT-N7000 using xda app-developers app

SpyderTracks said:
Check your connection. Usually if bricked the process will start ok but halt at factory.fs. Try with a different usb cable, make sure it's in a mobo usb port not front one.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
how can i use mobie odin if i can't even access phone nor recovery?
hope there is a way

darkelfa2 said:
how can i use mobie odin if i can't even access phone nor recovery?
hope there is a way
Click to expand...
Click to collapse
Yeah, edited afterward.
Sent from my GT-N7000 using xda app-developers app

come on people... there most be someone who knows what i should do, please help

SpyderTracks said:
Check your connection. Usually if bricked the process will start ok but halt at factory.fs. Try with a different usb cable, make sure it's in a mobo usb port not front one.
Pit files should be a last resort. I don't think it's bricked personally. Does it power on at all?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
when odin get stuck on nand write start, the box above the port number with yellow mark says factoryfs, and yes the phone can olny boot to download mode

darkelfa2 said:
when odin get stuck on nand write start, the box above the port number with yellow mark says factoryfs, and yes the phone can olny boot to download mode
Click to expand...
Click to collapse
What is the outcome of flashing the "N7000_16GB_Q1_20110914--patched--brick-between-281-and-3770-MB--FACTORYFS-moved-by-3328-MiB.pit" as you mentioned above?
If you can also get into recovery, then better try to use hg42 partition scanner first, to see if and where the damage is in the emmc.
http://forum.xda-developers.com/showthread.php?t=1823918

forest1971 said:
What is the outcome of flashing the "N7000_16GB_Q1_20110914--patched--brick-between-281-and-3770-MB--FACTORYFS-moved-by-3328-MiB.pit" as you mentioned above?
If you can also get into recovery, then better try to use hg42 partition scanner first, to see if and where the damage is in the emmc.
http://forum.xda-developers.com/showthread.php?t=1823918
Click to expand...
Click to collapse
phone been on odin for about 40 minutes or so (is that normal?) but stuck on set partition and as i mentioned above, i cant access my phone nor recovery but i can access download mode.

darkelfa2 said:
phone been on odin for about 40 minutes or so (is that norma?l) but stuck on set partition and as i mentioned above, i cant access my phone nor recovery but i can access download mode.
Click to expand...
Click to collapse
If that long, then that pit doesn't seem to work.
I would try to flash a custom kernel such as hydracore or some other kernel that are available in .tar format. Then see if it help the phone get into recovery.
If that does not work, then just need to try other pit file from hg42 thread which move factoryfs by bigger number until it work. This is not a good strategy but it seems to be the only way.
---------- Post added at 11:29 PM ---------- Previous post was at 11:19 PM ----------
This is a gb kernel that can be flashed via odin to see if recovery works.
http://www.mediafire.com/?smwswkxwa3u3p4s

forest1971 said:
If that long, then that pit doesn't seem to work.
I would try to flash a custom kernel such as hydracore or some other kernel that are available in .tar format. Then see if it help the phone get into recovery.
If that does not work, then just need to try other pit file from hg42 thread which move factoryfs by bigger number until it work. This is not a good strategy but it seems to be the only way.
---------- Post added at 11:29 PM ---------- Previous post was at 11:19 PM ----------
This is a gb kernel that can be flashed via odin to see if recovery works.
http://www.mediafire.com/?smwswkxwa3u3p4s
Click to expand...
Click to collapse
i got stuck on NAND write start agine, i think its time to try your other strategy, should i go with pit file that has factoryfs moved by the largest number first or the one with the less number?

darkelfa2 said:
i got stuck on NAND write start agine, i think its time to try your other strategy, should i go with pit file that has factoryfs moved by the largest number first or the one with the less number?
Click to expand...
Click to collapse
I would try the first way of flash a kernel since it does not take much time.
Anyway, if want to try second strategy should move up by 500 mb or 1 gb each time.
I saw some people reported problem after flashing a pit with big number them move back to flash a pit with small number so should try to avoid that situattion.
The next pit I would choose it the one move fatoryfs by 4608mib for example.

forest1971 said:
I would try the first way of flash a kernel since it does not take much time.
Anyway, if want to try second strategy should move up by 500 mb or 1 gb each time.
I saw some people reported problem after flashing a pit with big number them move back to flash a pit with small number so should try to avoid that situattion.
The next pit I would choose it the one move fatoryfs by 4608mib for example.
Click to expand...
Click to collapse
thank you for your replies, i will try to try them as you mentioned above and by the way and will wait 15-20 minutes in each operation, i already tried the last version of hydracore but had no success, one last thing, if none of them worked (hope not), is there any other possible way to revive from the brick(other than replacing the motherboard or replacing the phone from samsung)?

bricked or not
same problem here, was on stock ics rooted for quite sometime, today decided to flash alliance rom v2.1, booted to cwm recovery, did a full wipe and after that i just hated myself. phone didnt boot into recovery and odin gets stucked at factoryfs, tried to flash with pit file too but no result same stuck in problem. then i flashed different kernel fm note kernel through odin which was a success, got my recovery back but unfortunately the only rom i have on internal sd was alliance rom which doesnt install, either says emmc error alliance rom or stucks at extracting system. so again flashed abyss kernel and did a full wipe again but odin still does not go beyond factory fs and i am trying to flash ics rom again. any idea what i should do now as i can flash a kernel and go into recovery. help will be appreciated. meanwhile downloading gb rom to check as i read in other posts it works tough not sure.

sahil4u said:
same problem here, was on stock ics rooted for quite sometime, today decided to flash alliance rom v2.1, booted to cwm recovery, did a full wipe and after that i just hated myself. phone didnt boot into recovery and odin gets stucked at factoryfs, tried to flash with pit file too but no result same stuck in problem. then i flashed different kernel fm note kernel through odin which was a success, got my recovery back but unfortunately the only rom i have on internal sd was alliance rom which doesnt install, either says emmc error alliance rom or stucks at extracting system. so again flashed abyss kernel and did a full wipe again but odin still does not go beyond factory fs and i am trying to flash ics rom again. any idea what i should do now as i can flash a kernel and go into recovery. help will be appreciated. meanwhile downloading gb rom to check as i read in other posts it works tough not sure.
Click to expand...
Click to collapse
it is good as far as you can access cwm recovery, try to get any external sd, download a rom and put it on the external sd using other phone
and flash it using cwm and dont forget your safe kernel , and can you tell me please what kernel you've used?

sahil4u said:
same problem here, was on stock ics rooted for quite sometime, today decided to flash alliance rom v2.1, booted to cwm recovery, did a full wipe and after that i just hated myself. phone didnt boot into recovery and odin gets stucked at factoryfs, tried to flash with pit file too but no result same stuck in problem. then i flashed different kernel fm note kernel through odin which was a success, got my recovery back but unfortunately the only rom i have on internal sd was alliance rom which doesnt install, either says emmc error alliance rom or stucks at extracting system. so again flashed abyss kernel and did a full wipe again but odin still does not go beyond factory fs and i am trying to flash ics rom again. any idea what i should do now as i can flash a kernel and go into recovery. help will be appreciated. meanwhile downloading gb rom to check as i read in other posts it works tough not sure.
Click to expand...
Click to collapse
Once get recovery it is best to try to scan partition to identify where the damage is. You can you adb method in my manual repartition guide or the scanner from hg42 which is even better.
Sent from my phone
---------- Post added at 06:30 AM ---------- Previous post was at 06:25 AM ----------
darkelfa2 said:
thank you for your replies, i will try to try them as you mentioned above and by the way and will wait 15-20 minutes in each operation, i already tried the last version of hydracore but had no success, one last thing, if none of them worked (hope not), is there any other possible way to revive from the brick(other than replacing the motherboard or replacing the phone from samsung)?
Click to expand...
Click to collapse
Should try the kernel I sent and also the fm kernel suggested in the post above. Once having recovery it is much easier and there are more options. Otherwise, custom pit is the last resort before mobo replacement.
Sent from my phone

sahil4u said:
same problem here, was on stock ics rooted for quite sometime, today decided to flash alliance rom v2.1, booted to cwm recovery, did a full wipe and after that i just hated myself. phone didnt boot into recovery and odin gets stucked at factoryfs, tried to flash with pit file too but no result same stuck in problem. then i flashed different kernel fm note kernel through odin which was a success, got my recovery back but unfortunately the only rom i have on internal sd was alliance rom which doesnt install, either says emmc error alliance rom or stucks at extracting system. so again flashed abyss kernel and did a full wipe again but odin still does not go beyond factory fs and i am trying to flash ics rom again. any idea what i should do now as i can flash a kernel and go into recovery. help will be appreciated. meanwhile downloading gb rom to check as i read in other posts it works tough not sure.
Click to expand...
Click to collapse
Hi there, sounds like a bad flash or bad download. Firstly remove your external micro SD card and connect it to a PC / Laptop (standard SD adaptor or Card Reader). Download a "default" ROM and kernel and KEEP them on the card (you never know when you need to go back to them). I use Abyss 4.2 kernel and Chrack ROM personally. I always have the jBroid Kernel Cleaner saved also). Replace the micro SD card.
If you can get into Recovery, flash the jBroid script cleaner. Now flash Abyss 4.2 kernel (GB safe kernel) and reboot into Recovery again. Now flash Chrack Rom. I've had a number of bad flashes and these 3 zips have always pulled me out a hole.
Hope this helps. Hit Thanks if it did.

Alba Donzo said:
Hi there, sounds like a bad flash or bad download. Firstly remove your external micro SD card and connect it to a PC / Laptop (standard SD adaptor or Card Reader). Download a "default" ROM and kernel and KEEP them on the card (you never know when you need to go back to them). I use Abyss 4.2 kernel and Chrack ROM personally. I always have the jBroid Kernel Cleaner saved also). Replace the micro SD card.
If you can get into Recovery, flash the jBroid script cleaner. Now flash Abyss 4.2 kernel (GB safe kernel) and reboot into Recovery again. Now flash Chrack Rom. I've had a number of bad flashes and these 3 zips have always pulled me out a hole.
Hope this helps. Hit Thanks if it did.
Click to expand...
Click to collapse
i've already mentioned that it has no recovery mode, and yes, i always have abyssnote kernel in my ex-sd also in my friend's phone, the thing is that he don't know about the emmc bug and he did a restore on a none safe kernel and thats how he bricked his phone
what i've done so far is trying the pit file way but had no luck, now the thing is that the binary counter is 5 and i can't go to have a m/b replacement for free as the warranty is voided, is there any way to reset the counter or to hardbrick the phone except for the jig method?

[q] help help helpppppppppppppp :(

i was installing parandroid 2.52 ...and the installation failed...nd i wasen able to flash roms either .....so ive used odin and tried to install the stock os of 2.3.6 it didnt complete it paused arnd 95% nd didnt move further .....so ive tried doin the same with 4.0.4 ics nd it paused arnd 90% and it didnt go further either......now my phone cant even go to cwm ...i tried installing cwm even through odin ....i badly need your help.....

frostcharm said:
i was installing parandroid 2.52 ...and the installation failed...nd i wasen able to flash roms either .....so ive used odin and tried to install the stock os of 2.3.6 it didnt complete it paused arnd 95% nd didnt move further .....so ive tried doin the same with 4.0.4 ics nd it paused arnd 90% and it didnt go further either......now my phone cant even go to cwm ...i tried installing cwm even through odin ....i badly need your help.....
Click to expand...
Click to collapse
First give me your phone specs and let us know how flashed your phone....
provide more details we'll help you out..

galaxy note gt N7000
mine galaxy note gt N7000.....its been just 3 months since ive got it

Does your phone atleast startup in fastboot mode?

nooo....it dosen work....it jsut says firmware update encountered an issue ......

frostcharm said:
nooo....it dosen work....it jsut says firmware update encountered an issue ......
Click to expand...
Click to collapse
remove the battery, wait for a minute and replace battery. now try starting it in fastboot..
fastboot is essential. if it works, then we can flash a custom kernel and a compatible rom..
So first try getting it in fastboot.

tried it.....fastboot is the vol down +vol up right....well.....it opens up sayin firmware update page ,,,,arrrr i dont even know what to do now

frostcharm said:
tried it.....fastboot is the vol down +vol up right....well.....it opens up sayin firmware update page ,,,,arrrr i dont even know what to do now
Click to expand...
Click to collapse
first thing you should do now is, relax...
I'm new so cant post outside links..
try googling "samsung gt n7000 firmware error" and choose the first link. (from android authority)
download the firmware and the odin flasher...
follow every step carefully
any doubts, I'm always here...!
good luck!

thanks ...well it didnt work...nothin did...am just downloadin the oldest firmware XXLC1 ....lets hope it works atleast. :fingers-crossed:.......thanks for ya replies.....:good:

Did you successfully flash ROM?
Sent from my GT-N7000 using xda app-developers app

use Odin 1.85 & i try to flash stock ics it will work don't worry its just that firmware is not flashed so no software is present that's why that message comes.
hit thanks if it works for you... :thumbup:

i ve tried all that....and now the worst part is .......i cant charge my mob,....cause it aint bein detected ............arrrrrrr things just keeps gettin better and better ,,,,

well obv i did.......it aint my fiarst time either flashin......but now its got a soft brick thats for sure......and i cant charge my mob too....since the mob aint even bein detected

But you can still get into download mode and Odin sees it right?
Ok, Lets assume yes. Now download This stock ICS kernel and flash with PC Odin. (put it in the PDA box)
---------- Post added at 01:21 PM ---------- Previous post was at 12:44 PM ----------
If the kernel flash was successful, you should now be able to boot into stock ICS recovery
Next step. Download This Philz kernel and get it onto your Ext SD card somehow (Old phone?, camera? card reader?..) and put it back into your Note.
Boot into stock recovery "apply update from external storage", select Philz kernel and flash it.
How's things going so far?
Any way if it works boot back into recovery (now Philz) go to mount and storage, make sure data, cache and system are un-mounted and FORMAT them. You should now be able to flash a ROM, either by PC Odin or flashing a zip.Rom through CWM.:fingers-crossed:

don't worry your phone is charging you have to use charger instead of usb....
& for flashing you have repeat whole process or flash recovery firmware using kies as I have also encountered this on galaxy s duos last week.... or you should another rom perhaps it ay work
Sent from my GT-N7000 using xda app-developers app

[Q] phone won't boot

hello my samsung galaxy s advance (i9070) won boot after i installed this recovery tool an then i tried different firmware and kernels but its not working plz help

expansion11 said:
hello my samsung galaxy s advance (i9070) won boot after i installed this recovery tool an then i tried different firmware and kernels but its not working plz help
Click to expand...
Click to collapse
how did you flash? odin or dd method? and is phone name and logo coming?

Brainiac.shri said:
how did you flash? odin or dd method? and is phone name and logo coming?
Click to expand...
Click to collapse
im using odin and i see the logo noting more

can you enter recovery (vol up+menu+power) or download mode (vol down+menu+power)?
if you can get into recovery, do wipe dalvik->reboot and tell us what happens
if download - flash your country's whole rom with odin and start again

adamuadamu said:
can you enter recovery (vol up+menu+power) or download mode (vol down+menu+power)?
if you can get into recovery, do wipe dalvik->reboot and tell us what happens
if download - flash your country's whole rom with odin and start again
Click to expand...
Click to collapse
i can go in download mode and i did try stock roms and kernels bit it wont work and cant access the recovery tool

expansion11 said:
i can go in download mode and i did try stock roms and kernels bit it wont work and cant access the recovery tool
Click to expand...
Click to collapse
were you using JB or GB, accordingly flash the samsung stock ROM and after "PASS" in ODIN remove battery and factoy reset,it should work.

Brainiac.shri said:
were you using JB or GB, accordingly flash the samsung stock ROM and after "PASS" in ODIN remove battery and factoy reset,it should work.
Click to expand...
Click to collapse
i think i was using GB, and i flashed the stock rom and i how do i factory reset it when i can't get in the recovery mode?

Одг: [Q] phone won't boot
expansion11 said:
i think i was using GB, and i flashed the stock rom and i how do i factory reset it when i can't get in the recovery mode?
Click to expand...
Click to collapse
That sounds like you had jb, that happend to me when I flashed GB over JB.
Sent from Galaxy S Advance

shut_down said:
That sounds like you had jb, that happend to me when I flashed GB over JB.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
yes i had JB but that ron was not for my country so i could not connect to the mobile network so i wanted to get the right version but the download was slow so i wanted to get a diffrent kernal but then it went wrong

Одг: [Q] phone won't boot
expansion11 said:
yes i had JB but that ron was not for my country so i could not connect to the mobile network so i wanted to get the right version but the download was slow so i wanted to get a diffrent kernal but then it went wrong
Click to expand...
Click to collapse
Flash JB again. Then folow turorial how to get GB back. You have that on General I think, or on Developer part of forum. Look.
Its not gonna work if you just flashed GB, I know from my expirience.
Sent from Galaxy S Advance

shut_down said:
Flash JB again. Then folow turorial how to get GB back. You have that on General I think, or on Developer part of forum. Look.
Its not gonna work if you just flashed GB, I know from my expirience.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thanks that worked!

Одг: [Q] phone won't boot
expansion11 said:
Thanks that worked!
Click to expand...
Click to collapse
Sent from Galaxy S Advance

so what are you using now? GB or JB? i had that problem too...it booted well jbean and im stuck at seup wizard error pop out... i cant acceess also recovery mode but download mode is ok... im now back at Gbread but i still wanted my cp to be on JBean is there a force mothod? to pass error "unfortunately, samsung setup wizard has stoped?" i had this problem same exact one...

Still problem with booting
I have tried to flash many different firmwares. ODIN says green but the phone does not boot. Just the first logo or Samsung with some animation.. than it gets stuck there. ADB does not work then either.
I have tried to root and wipe data with different ODIN, but nothing helped. TWRP is not present on "download mode" either..
On ODIN3 v3.07 I see there there is a tickbox for "NAND ERASE ALL" but when I have it checked it fails or hands on erase state.
Could you please help me what I can do next?
I would like to have complete firmware and root and install TWRP etc. but I need to get booting up ok. I have already 15 on "custome binory download"

x-samsung said:
I have tried to flash many different firmwares. ODIN says green but the phone does not boot. Just the first logo or Samsung with some animation.. than it gets stuck there. ADB does not work then either.
I have tried to root and wipe data with different ODIN, but nothing helped. TWRP is not present on "download mode" either..
On ODIN3 v3.07 I see there there is a tickbox for "NAND ERASE ALL" but when I have it checked it fails or hands on erase state.
Could you please help me what I can do next?
I would like to have complete firmware and root and install TWRP etc. but I need to get booting up ok. I have already 15 on "custome binory download"
Click to expand...
Click to collapse
after flashing.. remove / replace your battery..
try booting in recovery by pressing vol up+home+power at the same time..
then scroll down to factory reset via vol keys..
wipe and restore factory settings..

Help me, my galaxy note N7000 died...(Formware upgrade ancountered an issue.)

Hello everybody.
I have a problem in my gt-N7000.
I tried to install the CM10, install normal.
I installed Gapps also normal.
When I went to wipe it crashed.
Now no more enters recovery mode, download mode only.
When I turn it only gets in this mensage:
"Formware upgrade ancountered an issue. Pease select recovery mode in Kies & try again."
I've tried to pass other Stock Roms via Odim, but always hangs Odim.
I do not know what else to do, will my phone still has solution?

And have you tried that recovery mode in Kies?
Sent from my Galaxy S3 using Tapatalk 2

NuttyBunny said:
And have you tried that recovery mode in Kies?
Sent from my Galaxy S3 using Tapatalk 2
Click to expand...
Click to collapse
Hello,
Yes, but the Kies does not recognize and is carrying the cel.
I made a DESBRICK him, and now he is going into Recovery mode.
Now is no longer appearing that message gets stuck in samsung logo.

try flashing a safe kernel from odin first and try

Qwerty123 \m/ said:
try flashing a safe kernel from odin first and try
Click to expand...
Click to collapse
Kernel There are many available.
Could you direct me to one? for no errors
Edit: I tried flashing CM10, but it hangs and then resets.

where does the odin hang? and before install cm rom what rom & kernel were you on?

nokiamodeln91 said:
where does the odin hang? and before install cm rom what rom & kernel were you on?
Click to expand...
Click to collapse
Hello,
Unfortunately I do not know which kernel was using, but I was the Official Rom 4.0.3.
I'm downloading now the site of the kernel SamMobile'll try and pass via Odin.
If it does not work, post the error here ok?

Ok.. also.. what was your flashing method? which file did you flash first? was your phone rooted?

nokiamodeln91 said:
Ok.. also.. what was your flashing method? which file did you flash first? was your phone rooted?
Click to expand...
Click to collapse
I do not know if I can answer all your questions ... I did not root the phone.
I tried going through the kernel odin said that he caught up and in factoryms.img, as stated in the attached image.
Do not know if this is of great relevance but I can not give Wipe the recovery mode, it also crashes and resets the phone.
What should I do? = /

gabrielfonsecas said:
. I did not root the phone.
Click to expand...
Click to collapse
1. I don't know what you mean by this.? The was was not rooted or some one else rooted it for you?
2. The place where odin is stuck could indicate a brick. So you need to be precise in the info you give.
3. Did you use cwm.zip to install the rom directly on a non rooted phone?

If ODIN is working for you,
Get your mobile flashed with Philz Kernel by putting the TAR file on PDA.
Enter Philz Kernel in recovery and flash a ROM of your choice.
If you can't then u r a superbrick.

nokiamodeln91 said:
1. I don't know what you mean by this.? The was was not rooted or some one else rooted it for you?
2. The place where odin is stuck could indicate a brick. So you need to be precise in the info you give.
3. Did you use cwm.zip to install the rom directly on a non rooted phone?
Click to expand...
Click to collapse
Sorry for my english, I'm using google translation.
I was using the official version 4.0.3, so I entered the reovery and installed CWM and the file to the Root. Shortly thereafter, without restarting the phone installed the CM10 and then the gapps. When I do the Wipe the phone crashed.
Since then, officials have spent several Roms by Odin and all lock.
I do not know if I was very clear on the information, but now the phone is locked it sansumg logo. And when he enters recovery does not wipe, lock and resets the device.
Again, sorry for my english.

So you have flashed cwm.zip and the the root file and then on the same temp recovery, wiped.? That is serious mistake and it seems a brick.
---------- Post added at 12:31 AM ---------- Previous post was at 12:29 AM ----------
What you can try is go to this thread
http://forum.xda-developers.com/showthread.php?t=1424997
Download the PIT file, open odin and choose the file in PIT tab. Make sure the repartition is checked. Then load the rom in pda tab. Flash the rom again.

nokiamodeln91 said:
So you have flashed cwm.zip and the the root file and then on the same temp recovery, wiped.? That is serious mistake and it seems a brick.
---------- Post added at 12:31 AM ---------- Previous post was at 12:29 AM ----------
What you can try is go to this thread
http://forum.xda-developers.com/showthread.php?t=1424997
Download the PIT file, open odin and choose the file in PIT tab. Make sure the repartition is checked. Then load the rom in pda tab. Flash the rom again.
Click to expand...
Click to collapse
I will try, thanks!!

Wait so you were on stock4.0.3 or 4.0.4 ?
Nand corruption i guess ?

nokiamodeln91 said:
So you have flashed cwm.zip and the the root file and then on the same temp recovery, wiped.? That is serious mistake and it seems a brick.
---------- Post added at 12:31 AM ---------- Previous post was at 12:29 AM ----------
What you can try is go to this thread
http://forum.xda-developers.com/showthread.php?t=1424997
Download the PIT file, open odin and choose the file in PIT tab. Make sure the repartition is checked. Then load the rom in pda tab. Flash the rom again.
Click to expand...
Click to collapse
I did what you said.
Enter the field arquivo.pit PIT odin and rom in PDA. I marked the re-partition option and it hangs in the same place.
Will my cell phone died?

Seems you system partition got corrupted. Do you have warranty?

Qwerty123 \m/ said:
Wait so you were on stock4.0.3 or 4.0.4 ?
Nand corruption i guess ?
Click to expand...
Click to collapse
Hi,
was using the official 4.0.3!!

nokiamodeln91 said:
Seems you system partition got corrupted. Do you have warranty?
Click to expand...
Click to collapse
I was also thinking that. Unfortunately it is no longer under warranty.
The techniques assists solve this kind of problem?

Do you still have access to recovery? If yes is it cwm recovery or stock android 3e recovery?

[Q] Updated ROM Philz JB 4.1.2 XXLT6 via Odin but won't go past samsung gt-n7000

Hope you guys can help me.
Was updating my ICS (Criskelorom) to JB 4.1.2 XXLT6 ROM of Philz (PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5) via Odin 3.07. Initially had some issues but, managed to get to where Odin resulted in a PASS. On REBOOT I only get up to the Samsung Galaxy GT-N7000 screen with a yellow ! triangle at the bottom. I was able to get to both Recovery and Download modes but would never get passed to homescreen and just stay on black screen.
Did it several times and got worried I'd brick my phone so I ran the ICS zip I had stored on my SD via Recovery mode and was able to get my phone running. Still want to pursue my JB upgrade though but, not sure if I was doing it right. Any help would be much appreciated guys.
Here is what I did...
MADE SURE OF THE FF.:
1) Install USB driver for Samsung Galaxy Note to transfer files between the phone and the computer using download of KIES from Samsung site
2) Enable USB Debugging Mode on the phone to connect the Android device with the computer
3) created a back-up of my contacts only
4) charged to above 80% battery charge
5) The phone should be factory unlocked and not locked to any particular carrier - I had unlocked it during my ICS upgrade from the GB original OS
THEN FOLLOWED THE STEPS:
Step-1: Download PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 for Samsung Galaxy Note to the computer
Step-2: Download Odin 3.07 which will help to install the root package on the phone. Extract the Odin zip to get Odin3 v3.07.exe file with some other files
Step-3: Place the Galaxy Note into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot appears on the phone's screen. Now press the Volume Up button to continue to enter into Download Mode
Step-4: Run Odin3 v3.07.exe as an Administrator
Step-5: Connect the Note to the computer using USB cable while it is in the Download Mode. Wait for some time until Odin detects the phone. When the device is connected successfully, the ID: COM box in Odin will turn yellow with the COM port number. Also, the successful connection will be indicated by a message saying Added in Odin.
Note: If the Added message does not come then try another US port, try the one located at the back side of the computer. If Odin still fails to detect the device then re-install USB driver
Step-6: In Odin, click the PDA button and select the PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 file
Step-7: Now configure the Odin settings. Ensure that the Auto Reboot and F.Reset Time checkboxes are selected in Odin. As for the Re-Partition, uncheck the option
Step-8: Once everything is set, click the Start button in Odin. The installation should begin now and would take about few minutes to complete
Step-9: When the installation process is completed the phone will restart automatically. And soon a PASS message with green background will appear in the Odin indicating successful installation. After the home screen appears on the phone, unplug the USB cable from the device to disconnect it from the computer
Was able to reach Step-9 but my phone would not get to home screen.
Please help me with any advise anyone can give me?
thanks.

By the way, saw another option for Steps 5-6:
Step-5: Connect your Note N7000 with your PC using a data cable. Once the device is successfully connected, you will see a notification in Odin in the bottom left saying Added!! - if for some reason, you do not see the said notification, try another USB port. Also, check for ID:COM port being depicted by a number in yellow to make sure that you have successfully added your device.
Select the following files in Odin at their respective tabs from extracted XXLT6 firmware folder:
Step-6:
Click the PDA button to select the .tar file extracted earlier.
Click the Phone button, and select file with *modem* in its name (ignore, if this file does not file exist).
Next, click the CSC button, and select file with *csc* in its name (ignore, if this file does not file exist).
Click the PIT button to select the .pit file. (ignore, if this file does not file exist).
Ensure that Auto Reboot and F. Reset Time are the only options selected in Odin window. Also ensure to select Re-Partition checkbox only if you are using a .pit file.
Except since I only had the TAR file I ignored the rest so I assumed I was doing it right up to that point. Also, the YELLOW highlight in Odin 3.07, wasn't yellow but kind of light blue.
That was it. All I did. Still, not succesful.
Please help.
Thanks.

Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.

nokiamodeln91 said:
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
Click to expand...
Click to collapse
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!

izmoothski said:
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
Click to expand...
Click to collapse
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk

treacherous_hawk said:
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Got it, thank you Sirs you've all been a very big help. I ran into some issues with TW right after completing the install of 4.1.2. Every darn thing was stopping even acore and TW. Was about to chicken out and go back to my safety ICS ROM when I got to read some stuff about needing to Clear/Reset on Recovery mode after any firmware flashing as well as Clearing the Cache so I did. And voila, it worked. I think I'll rest my worrying brain for now on the root. =P
I'll root it next week. I'll just have fun with it for now. Been up playing around with this for over 24hours now. Having too much fun but already drained.
Thank you again for you help!

same situation here...!!!
hello XDA ppl...
I had ICS 4.0.4 and attempted to use PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5.
That took me to the same situation I think... kernel for JB and ICS ROM...
I power on my phone and it gets to a GT-N7000 Note + Yellow Triangle screen and NO MORE!
I can get to PhilZ Recovery Mode or ODIN Download Mode.
That´s all...
I will attempt right now what you told the creator of this thread and update if it helped.
any help is welcome...

FIXED!!!
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
---------- Post added at 03:33 AM ---------- Previous post was at 03:28 AM ----------
juliowong said:
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
Click to expand...
Click to collapse
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.

juliowong said:
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Safest way to get to JB with wipe (that is formatting) is to get philz kernel for ICS and then reboot to recovery do factory reset and wipe /system /data /internal storage /cache and then reboot to download mode and flash JB from odin. Else if you dont want to loose data, just boot into download mode and flash JB using odin.

juliowong said:
6. recovery mode.
7. clear data/factory reset.
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Yeah!! May be you want to start by not wiping on a stock ICS kernel.