I got a Galaxy S3 Mini I8190 running 4.1.1 XXALJL (rooted) and the auto rotation doesn't work. I tried full wipe and calibration but nothing happens. And before you ask, yes, the auto rotation option is obviously enabled.
Any ideas?
Re: [Q] Auto-rotation doesn't work
Have you got auto rotate box ticked in the display setting, or pull down bar on top of display and see if screen rotation is green. Or maybe you upgrade your firmware to 4.1.2,or could be some App turning it off.
Sent from my GT-I8190 using xda premium
kicker63 said:
Have you got auto rotate box ticked in the display setting, or pull down bar on top of display and see if screen rotation is green. Or maybe you upgrade your firmware to 4.1.2,or could be some App turning it off.
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
So if you upgrade to 4.1.2 the screen rotation is gone?
Re: [Q] Auto-rotation doesn't work
aspot72 said:
So if you upgrade to 4.1.2 the screen rotation is gone?
Click to expand...
Click to collapse
When u upgrade to 4.1.2 u should have screen rotation.Mine works fine
Sent from my GT-I8190 using xda premium
I'm gonna try to upgrade to 4.1.2 using I8190XXAMA1_I8190OXAAMA1_4.1.2 V3 by infected_ and see how it goes.
DarkSwanKnight said:
I'm gonna try to upgrade to 4.1.2 using I8190XXAMA1_I8190OXAAMA1_4.1.2 V3 by infected_ and see how it goes.
Click to expand...
Click to collapse
Be carefull what are you flashing. If your Mini is 8190N (means NFC enabled), you'll need NFC ROM. I just flashed 4.1.2. and all works fine. However, the phone keep most of the time on G/E instead of 3G/H...
---------- Post added at 02:29 PM ---------- Previous post was at 02:28 PM ----------
detexr said:
When u upgrade to 4.1.2 u should have screen rotation.Mine works fine
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
Mine as well. So far so good.
aspot72 said:
Be carefull what are you flashing. If your Mini is 8190N (means NFC enabled), you'll need NFC ROM. I just flashed 4.1.2. and all works fine. However, the phone keep most of the time on G/E instead of 3G/H...
Click to expand...
Click to collapse
AFAIK my device is I8190. I flashed the rom I mentioned earlier and it didn't work out as planned. It stopped after flashing at CWM asking if I wanted to flash and untrusted image which didn't work anyways. After continuing the device boots normally but the problem is the same (rotation doesn't work) and worse is the capacitive buttons didn't work at all.
I downloaded my stock rom and gonna flash it now but I will lose the root though.
Edit: just finished flasing the stock rom I8190XXALJL_I8190OJVALJ9 and the rotation problem is still there. Also I noticed the auto brightness doesn't work as well. I'm wondering if it's a defect or just a bug in 4.1.1.
Re: [Q] Auto-rotation doesn't work
DarkSwanKnight said:
AFAIK my device is I8190. I flashed the rom I mentioned earlier and it didn't work out as planned. It stopped after flashing at CWM asking if I wanted to flash and untrusted image which didn't work anyways. After continuing the device boots normally but the problem is the same (rotation doesn't work) and worse is the capacitive buttons didn't work at all.
I downloaded my stock rom and gonna flash it now but I will lose the root though.
Edit: just finished flasing the stock rom I8190XXALJL_I8190OJVALJ9 and the rotation problem is still there. Also I noticed the auto brightness doesn't work as well. I'm wondering if it's a defect or just a bug in 4.1.1.
Click to expand...
Click to collapse
?
We don't have auto brightness sensor.
Dfaq did you flash?
Possible faulty accelerometer?
Sent from my GT-I8190 using xda app-developers app
ppero196 said:
?
We don't have auto brightness sensor.
Dfaq did you flash?
Possible faulty accelerometer?
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I found out about the whole light sensor thing later, kinda pisses me off though.
I too have a feeling it's a problem with accelerometer. Especially since upgrading to 4.1.2 didn't help.
Anyways, I took it today to the service center and I'm waiting for them to call me and tell me what they'll do. I just hope it doesn't take long, it's frustrating as it is.
Edit: I got it back from the service shop, they said it was a hardware issue, but it's fixed now and working fine.
DarkSwanKnight said:
(...)
Edit: I got it back from the service shop, they said it was a hardware issue, but it's fixed now and working fine.
Click to expand...
Click to collapse
What kind of issue and how did they solve it?
Old Jimbo said:
What kind of issue and how did they solve it?
Click to expand...
Click to collapse
Have a look at the date.. Its 5 years old
Related
Maybe its just me!!! but I find that after updating to ICS 4.0.3 on note the ram usage is always quite high, as always around 600-700. does anyone else have this problem ?
Another problem i find is the lag in the camera? like when you take a picture and then scroll through picture you've taken, after press the back key and it lags for a while before returning to home screen..
PLease say it isnt just me
p.s Ive got the TGY(hong kong) version of ICS officially from kies!!
+1 i oso got problem is the ram...it is very high...higher than gingerbread...any suggestion??
Suggestion:
go to a cm9 build ROM with a "safe" kernel as well.
funkykyle316 said:
Maybe its just me!!! but I find that after updating to ICS 4.0.3 on note the ram usage is always quite high, as always around 600-700. does anyone else have this problem ?
Another problem i find is the lag in the camera? like when you take a picture and then scroll through picture you've taken, after press the back key and it lags for a while before returning to home screen..
PLease say it isnt just me
p.s Ive got the TGY(hong kong) version of ICS officially from kies!!
Click to expand...
Click to collapse
Hi kyle. I was facing the same issues...but a factory reset solved it all...infact the phone now works like a dream.. Hell the battery life has doubled.. Have been using all day today since 5am..its 22.30 right now and still got 65pc battery left...
Let me know if u need to know anything else..
avijitupadhyay said:
Hi kyle. I was facing the same issues...but a factory reset solved it all...infact the phone now works like a dream.. Hell the battery life has doubled.. Have been using all day today since 5am..its 22.30 right now and still got 65pc battery left...
Let me know if u need to know anything else..
Click to expand...
Click to collapse
Just a word of warning....a factory reset or any kind of wipe could hard brick your device on official samsung roms.
Don't wipe!! It could trigger the eMMC bug and possibly brick your phone if you try to flash anything. The best advice is to flash a safe gb rom using pc odin and wait until a solution comes out.
avijitupadhyay said:
Hi kyle. I was facing the same issues...but a factory reset solved it all...infact the phone now works like a dream.. Hell the battery life has doubled.. Have been using all day today since 5am..its 22.30 right now and still got 65pc battery left...
Let me know if u need to know anything else..
Click to expand...
Click to collapse
can u screenshot ur battery use?
Sent from my X8 using xda premium
avijitupadhyay said:
Hi kyle. I was facing the same issues...but a factory reset solved it all...infact the phone now works like a dream.. Hell the battery life has doubled.. Have been using all day today since 5am..its 22.30 right now and still got 65pc battery left...
Let me know if u need to know anything else..
Click to expand...
Click to collapse
I presume that your screen was off during much of this time? I am using the LPY build and use my note for prolonged book reading. With the screen on auto brightness I am lucky to get 6.5 hours with all other data services running.
Sent from my GT-N7000 using Tapatalk 2
I thought brick problems was caused by cwm wipes, i dont think.the emmc problem is being experienced by those of us using stock.only? ?? I have looked at quite a few threads and it appears to me only people who root get the issue may be wrong but i peesoannly think.stock only should be safe
Sent from my GT-N7000 using xda premium
I am having the same problem....no solutions yet. Like others have mentioned, DON'T WIPE!! ask me how I know? lol
I deleted ICS Browser. That helped quite a bit.
mancuk29 said:
I thought brick problems was caused by cwm wipes, i dont think.the emmc problem is being experienced by those of us using stock.only? ?? I have looked at quite a few threads and it appears to me only people who root get the issue may be wrong but i peesoannly think.stock only should be safe
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I think likewise, there is one case of bricking using the wipe in stock recovery (XXLPY if I didn't remember wrongly), but the person has rooted his phone using Dr Ketan method (temp cwm + su-busybox installer), so is still not a pure official stock rom imo.
I just finally upgraded to official ICS and using LP9...
So far everything is buttery smooth.
Just a question.. Is doing a factory reset (under Backup & Reset) the same as wiping thru the Recovery Mode?
Sent from my GT-N7000 using xda premium
jiawei0309 said:
can u screenshot ur battery use?
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Sure thing.. I restarted my phone this morning..so yesterdays stats gone... I will do so this evening...i hope performance is as good.
Sent from my GT-N7000 using XDA
oscarsalgar said:
Don't wipe!! It could trigger the eMMC bug and possibly brick your phone if you try to flash anything. The best advice is to flash a safe gb rom using pc odin and wait until a solution comes out.
Click to expand...
Click to collapse
Beg to differ.. On official ics upon factory reset its unlikely that one would hard brick the phone...
Sent from my GT-N7000 using XDA
Shrink said:
I presume that your screen was off during much of this time? I am using the LPY build and use my note for prolonged book reading. With the screen on auto brightness I am lucky to get 6.5 hours with all other data services running.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
It was a regular office day... Phone calls...msging...im... Browsing...no video streaming or camera... But even so surprised at great battery.
Sent from my GT-N7000 using XDA
avijitupadhyay said:
It was a regular office day... Phone calls...msging...im... Browsing...no video streaming or camera... But even so surprised at great battery.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
So far..6 hours...81pc battery left..
Sent from my GT-N7000 using XDA
Lock Screen Goes on suddently
Hello Xda members , i have just upgraded my galaxy note from gingerbread to official ICS thru samsung kies , everything went smoothly after upgraded , but my note's screen keeps lighting up for no reason on lock mode , sometimes it continues for several minutes then goes off ,sometimes its like a rotating cycle , it would come back after each 30 minutes... i have no such problem using the gingerbread..please help...
avijitupadhyay said:
So far..6 hours...81pc battery left..
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
No problems... Love the battery..
Sent from my GT-N7000 using XDA
Thanks for the reply. Sorry which stock romantic are you running? If it is one of the post LPY builds I may flash back to stock GB and then try it out. Thanks!
Sent from my GT-N7000 using Tapatalk 2
Shrink said:
Thanks for the reply. Sorry which stock romantic are you running? If it is one of the post LPY builds I may flash back to stock GB and then try it out. Thanks!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Hope this helps..
Sent from my GT-N7000 using XDA
My sister's galaxy s both the back and option softkeys are not working..
is there a way to solve this problem or is this a hardware issue and need to be brought to a repair shop?
Did this happen suddenly or they never worked? Did you try flashing a new rom?
If it ends up being an unfixable hardware issue a good workaround would be installing a rom that let's you activate navigation bar (like slim ics for example).
Sent from my GT-I9000 using xda app-developers app
alejoar said:
Did this happen suddenly or they never worked? Did you try flashing a new rom?
If it ends up being an unfixable hardware issue a good workaround would be installing a rom that let's you activate navigation bar (like slim ics for example).
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
They are not working at all..
i dont know when it started to stop responding..
i will try to look for a rom and install it.
I have problem with all cm9 and cm10 rom
Sometimes when i want to install app,i can't because install buttom doesn't work(i touch install but noting happen)but after some hour when i want insatllthat app,it's work.
Even when i did full wipe but happened again!
Can some one help to solve this problem?(my phone sgs +)
Sorry fot bad english!
Touch screen bug?
Sent from my GT-I9000 using xda premium
MintiIceCream said:
Touch screen bug?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Maybe!
Try to install CM7, try to run installation, and touch there, where it didnt work
Sent from my GT-I9000 using xda premium
Any body have this problem?
Is there any app can install apk file?(something like auto installer)
I dunno
Why would you need it?
Sent from my GT-I9000 using xda premium
MintiIceCream said:
I dunno
Why would you need it?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Becouse in normal way i can't install apk
Even on CM7?
(Try different roms)
If you used aosp then try aokp
If you used aokp then try aosp
Sent from my GT-I9000 using xda premium
MintiIceCream said:
Even on CM7?
(Try different roms)
If you used aosp then try aokp
If you used aokp then try aosp
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I try all cm rom(aokp,aosp,...)but it happen sometimes.after a while it well
MintiIceCream said:
I dunno
Why would you need it?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Do you know any app like that?
Running CM9.1 flawless on my SGS for a while now...don't recognize the problem you're describing...:silly:
zoomy63 said:
Running CM9.1 flawless on my SGS for a while now...don't recognize the problem you're describing...:silly:
Click to expand...
Click to collapse
Are you install apk?or just download from google play and it install automatic?
pouriajamali said:
Are you install apk?or just download from google play and it install automatic?
Click to expand...
Click to collapse
I went from GB 2.3.6 (rooted) with CWM installed to CM9.1 using the official ROM (Stable) and WIKI from the CM website!
You have a problem with touch screen or app? didnt get your question...
vigneshnallamad said:
You have a problem with touch screen or app? didnt get your question...
Click to expand...
Click to collapse
Problem with touch screen!
Problem with answering Calls - Running CM 10 - Jelly Bean 4.1.2
I have Galaxy S GT-19000 - installed CM 10 -Jelly Bean 4.1.2.- previously running GB 2.3.6.
Generally works well but have problem when receiving calls as Lock Screen with a pattern of Concentric Circles is displayed even though Lock Screen turned off. If I press on this screen the incoming phone call is disconnected .
However if I am careful and drag screen to the right I see very small green symbol to pickup phone.
Is there anyway to remove this locking pattern so that it does not display when phone rings and accept incoming calls ?
Note when the phone sleeps the Lock Screen is not displayed which suggests that the Lock Screen is not activated.
I have looked in settings but can't find any other way to remove the locking pattern when calls are recieved.
Just added to this query as follows:- When connecting to Charger the phone used to emit an audible sound - it still charges but I can't see in settings any action to enable sound.
I would appreciate your help
Les
bump - anyone ?
Widget torch stops working after using camera with flash. To make it work again you need to either delete "broken" shortcut from main screen and established new one or reset your phone pushing poweroff button for about 8 seconds. Is there any improvement for this soft or you have other solutions?
SamGal Note said:
Widget torch stops working after using camera with flash. To make it work again you need to either delete "broken" shortcut from main screen and established new one or reset your phone pushing poweroff button for about 8 seconds. Is there any improvement for this soft or you have other solutions?
Click to expand...
Click to collapse
What rom and kernel are you on?
Sent from my GT-N7000 using xda premium
SpyderTracks said:
What rom and kernel are you on?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
i am on stock 4.0.4 and i am also facing this problem. i suppose OP is also on stock.
SpyderTracks said:
What rom and kernel are you on?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
My phone has:
Android 4,0,4
N7000XXLRB
3.0.15-N7000XXLRI-CL811902
IMM76D.XXLRI
4.04 has a reputation for breaking or deleting shortcuts. I'd say it's a rom problem.
Sent from my GT-N7000 using xda premium
It especially had problems with non stock launcher.
You can download teslacoil's app
Sent from my GT-N7000000000 using Tapastalker 2
You could try another flashlight app. A good one I've tried before is TeslaLED, has more functionalities than the stock one and I noticed it worked when the stock one didn't (like with some custom kernels/ROMs).
Mine does the same thing 4.0.4 LRT, stock kernel, rooted.
Sent from my GT-N7000 using xda app-developers app
dbolivar said:
You could try another flashlight app. A good one I've tried before is TeslaLED, has more functionalities than the stock one and I noticed it worked when the stock one didn't (like with some custom kernels/ROMs).
Click to expand...
Click to collapse
I know that but stock flashlight is very covinient for me - especially with three levels of brightness. Still I think I will live with that until another update.
Hi all. I use CM 10.1.3 by Mardon for ace cooper. When i install a couple of mods from recovery after few reboots the screen automatically shows and functions only via a small circle displayed when touched. To select an app, i first have to drag the circle to that app and tap to select it. I have to reflash the rom to restore normal functioning.
Any suggestion??
ankkz said:
Hi all. I use CM 10.1.3 by Mardon for ace cooper. When i install a couple of mods from recovery after few reboots the screen automatically shows and functions only via a small circle displayed when touched. To select an app, i first have to drag the circle to that app and tap to select it. I have to reflash the rom to restore normal functioning.
Any suggestion??
Click to expand...
Click to collapse
Maybe Halo.apk? but AFAIK Mardons built hasn't got it :S
Did you look for in settings >>> development settings?
The fast solution:
Flash the rom again and don't flash strange mods xDDD
Viper The Ripper said:
Maybe Halo.apk? but AFAIK Mardons built hasn't got it :S
Did you look for in settings >>> development settings?
The fast solution:
Flash the rom again and don't flash strange mods xDDD
Click to expand...
Click to collapse
I could'nt find any settings for this..not even in development settings. It's more like a pen view like on Note2.. a circle follows and selects the app on which circle is positioned, but since ace does not have any pen i have to drag the circle..
And i don't really flash strange mods, only ones which are used, reviewed and recommended.. and this happens after every few mods (not the same ones)..
ankkz said:
Hi all. I use CM 10.1.3 by Mardon for ace cooper. When i install a couple of mods from recovery after few reboots the screen automatically shows and functions only via a small circle displayed when touched. To select an app, i first have to drag the circle to that app and tap to select it. I have to reflash the rom to restore normal functioning.
Any suggestion??
Click to expand...
Click to collapse
Try this..go to Developer Settings>>Uncheck 'Show Touches' option..
nix01 said:
Try this..go to Developer Settings>>Uncheck 'Show Touches' option..
Click to expand...
Click to collapse
Doesn't work..it is already unchecked
ankkz said:
Doesn't work..it is already unchecked
Click to expand...
Click to collapse
Reflash the rom and forget
Viper The Ripper said:
Reflash the rom and forget
Click to expand...
Click to collapse
That seems to be the only solution atm..
Anyways..let me know if someone finds a solution..
ankkz said:
That seems to be the only solution atm..
Anyways..let me know if someone finds a solution..
Click to expand...
Click to collapse
I would also be interested. I got this weird bug after flashing a script.
I just wonder why no one knows something about this bug/function, I mean for what did they developed this?
Sent from my GT-S5830 using xda app-developers app
ankkz said:
Hi all. I use CM 10.1.3 by Mardon for ace cooper. When i install a couple of mods from recovery after few reboots the screen automatically shows and functions only via a small circle displayed when touched. To select an app, i first have to drag the circle to that app and tap to select it. I have to reflash the rom to restore normal functioning.
Any suggestion??
Click to expand...
Click to collapse
try disabling force gpu rendering and screen updates
aditya rathee said:
try disabling force gpu rendering and screen updates
Click to expand...
Click to collapse
Never enabled it
Blackbox421 said:
I would also be interested. I got this weird bug after flashing a script.
I just wonder why no one knows something about this bug/function, I mean for what did they developed this?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Good to know I am not the only one
Blackbox421 said:
I would also be interested. I got this weird bug after flashing a script.
I just wonder why no one knows something about this bug/function, I mean for what did they developed this?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Which script did you use? It'd be really useful to know it to stay away form this script
Viper The Ripper said:
Which script did you use? It'd be really useful to know it to stay away form this script
Click to expand...
Click to collapse
Actually I used Fly-On mod. But it happens only once. I don't know anymore which version it was.. I installed Fly-On mod again now on another rom without problems..
Sent from my GT-S5830 using xda app-developers app
Sorry doublepost
Sent from my GT-S5830 using xda app-developers app[/QUOTE]
Sent from my GT-S5830 using xda app-developers app
It is not specific to fly on. It happened with me on “★ [MOD ] ◢ PurePerformances ™ X ◣ | SirI
Edition | Scary performances on your Ace" also.
The first installation is fine..the problem is with third or fourth flash..be it update or uninstaller. I guess the problem showed up when I flashed PX Recovery 0.4.0 or updates for MA6 KERNEL..
I strongly feel its some problem with device booting from recovery or script installation..
ankkz said:
It is not specific to fly on. It happened with me on “★ [MOD ] ◢ PurePerformances ™ X ◣ | SirI
Edition | Scary performances on your Ace" also.
The first installation is fine..the problem is with third or fourth flash..be it update or uninstaller. I guess the problem showed up when I flashed PX Recovery 0.4.0 or updates for MA6 KERNEL..
I strongly feel its some problem with device booting from recovery or script installation..
Click to expand...
Click to collapse
yea but after a reboot the circle stays and dont dissapear so i think its a problem with a script
Sent from my GT-S5830 using xda app-developers app
Blackbox421 said:
yea but after a reboot the circle stays and dont dissapear so i think its a problem with a script
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I hope you are not mistaking the cicle with boot animation circle..its one like in air view with a touch pen enabled..
The touch screen works but only via draging the circle around..
Also the circle does not stay on the screen, it appears when i touch it, then disappears after 3-4secs.
ankkz said:
I hope you are not mistaking the cicle with boot animation circle..its one like in air view with a touch pen enabled..
The touch screen works but only via draging the circle around..
Also the circle does not stay on the screen, it appears when i touch it, then disappears after 3-4secs.
Click to expand...
Click to collapse
I know what you mean man, I got the same bug before. We're talking about the same thing
Sent from my GT-S5830 using xda app-developers app
Hey guys....
a very old post... but im facing the same problem...
any solution?
I used Fly-On mod on Mardon's CM10.1 and I've never had that problem. Also I'm using that mod right now on CM7.2 and also no problems at all. Wipe all and re-flash the rom, I think it's the only way to fix this problem.