i9000 Never seen problem! - Galaxy S I9000 Q&A, Help & Troubleshooting

After I rooted the phone, I tryed installing a custom rom. I tryed installing a custom rom but there was no "install from ZIP" and then I used Odin to install.
happened when trying to install XXJVU Galaxy S Firmware and failed.

U were on stock recovery it seems... u shud have installed a custom kernel like semaphore or speedmod too for the custom recovery which has install zip from sdcard option...

Solved
Thank you for the response. As a new member i wasn't able to post picture after i posted.
but here it is img59.imageshack.us/img59/3095/photo1ddi.jpg
So what I had to do... is press the buttons in the right order to get to download mode

You have to change you kernel with a CF one as mentioned in this thread forum.xda-developers.com/showthread.php?t=788108 using odin.
Be carefully to choose the CF regarding your firmaware version.
With this you gain the root permission and the Recovery MOD and you can use it to backup, flash, wipe ....

pitiqu said:
Thank you for the response. As a new member i wasn't able to post picture after i posted.
but here it is img59.imageshack.us/img59/3095/photo1ddi.jpg
So what I had to do... is press the buttons in the right order to get to download mode
Click to expand...
Click to collapse
Congrats brother.. that is "your device have been bricked" sign. but no worry i suggest a few solution:
1. pull the batt out, put in and reboot.
or not succeed
2. go here http://forum.xda-developers.com/showthread.php?t=1886393
or not succeed
3. go here http://www.xda-developers.com/android/need-a-samsung-usb-jig-build-your-own/

Ynt: i9000 Never seen problem!
That's soft-brick mate! No worries brother If you're an advanced user you can try some stuff which are cool but as i said ,advanced only!
BUT there is a much easier way to fix this,borrow a usb jig.If you dunno what that means,type google "usb jig" and you'll see what's that for.
Basicly ,JIG will allow you to enter download mode in situations like this.A 301k will work i guess just buy it from ebay or something!
All you have to do,plug the jig to phone's usb port then device goes automaticly to download mode.Then plug out the jig and flash rom from odin!
Onur KARAKAS tarafindan Tapatalk 2 ile gönderildi

I have a problem...I installed the official value pack 2.3.6 and rooted it...the problem is that the screen automatically turns on, makes the unlock sound and then the lock sound and then then screen turns off...this happens every few minutes.

Related

I can only enter Recovery mode

Hi,
I installed a bootloader with Odin And after that I needed to Install a GBOOT with Odin but I can't enter dowload mode I only can enter Recovery mode. What do I need to do ?
I used this http://forum.xda-developers.com/showthread.php?t=1117990
What phone do you have?
What recovery version are you running?
How do you get into recovery?
A tad more info would be useful please.
9. Whatever I flash, I end up in Recovery! What should I do?
Flash stock Vibrant bootloaders, then ODIN to stock JFD. You should be good to go here onwards... I only had this issue when I tried changing bootloaders over MIUI/CM7. Couldn't replicate on Samsung ROMs... (AS QUOTED ON THE LINK PAGE)
Thank you for your responds
The recovery mode I run is CWM v 5.0.2.7 .
The thing is Odin can't recognize my phone because I can't enter Downloading mode so I can't flash that.
Hope you can help me further
if you got any rom's stored on your sdcard you could try to flash that and then try to enter download mode, otherwise you could go to "mounts and storage" and mount usb storage there and move over an rom to flash.
Try to flash phone via cwm. Now we have jvz deodexed version on forum. Maybe after it will be ob.
Wysłano z GT-I9000 z użyciem Tapatalk
I've tried to flash a rom from my SD card.
@Emek can you explain it more clearly. I don't understand it.
Grtz William !
There is a rom on here you can flash using CWM. On the forum is a JVZ that you can flash without using ODIn, slap that on your sd card, goto recovery and install from sd and hopefully that should fix it
Sorry of being such a noob. What's a JVZ and which one do I need to flash.
Grtz William
I flashed this one Click
And It still doesn't work...
edit: Tried this one as well Click
It still doesn't work. I hope my phone isn't Bricked. Is he ?
They wont work as you need the correct gingerbread bootloaders installed first.
You ned to make or buy a jig then you can get the phone to access download mode again, and then using ODIN 1.83 reflash everything inlcuding the bootloader.
Jig instructions http://forum.xda-developers.com/showthread.php?t=819551
Failing that, see if you can buy a jig from ebay
Ok thank you. I ordered yesterday a JIG from ebay.
What do I need to do then. What do I need to flash exactly ... I don't want to screw it up another time. I liked the MIUI rom but he didn't recognize the external SD so that's the reason why I flashed other bootloaders.
So I would like to have MIUI with working SD card.
If the SD card doesn't work I won't to flash the original Android.
Grtz William
I would download and flash this for starters, it contains a bootloader as well make sure you click the bootloader section in ODIN.
http://forum.xda-developers.com/showthread.php?t=1380402
Then you can flash a custom rom afterwards, but dont change the bootloader once it works!
buttwad said:
I would download and flash this for starters, it contains a bootloader as well make sure you click the bootloader section in ODIN.
http://forum.xda-developers.com/showthread.php?t=1380402
Then you can flash a custom rom afterwards, but dont change the bootloader once it works!
Click to expand...
Click to collapse
I tried to flash it but Odin said that it failed. But the ****ing thing now is that when I connect my phone to the usb my computer doesn't recognize it and odin doesn't recognize it at well. Please help ! I just want that my phone works !
Anybody please...
Once I was playing with downloading and recovering mode I got into recovery mode then I was unable to get back to normal phone or downloading screen
what I did I pull out battery put out my sim.
I pressed volume up and down and home button togather and then pressed on button it worked out for me you should try that might work for you may be or maybe not.
shez555 said:
Once I was playing with downloading and recovering mode I got into recovery mode then I was unable to get back to normal phone or downloading screen
what I did I pull out battery put out my sim.
I pressed volume up and down and home button togather and then pressed on button it worked out for me you should try that might work for you may be or maybe not.
Click to expand...
Click to collapse
I bought a JIG so I can get into download mode right now so then I flashed the ROM that Buttwad proposed. But ODIN said the proces of flashing failed and no when I connect my phone to my pc my pc even don't recognize my phone so I can't put anything on my phone. What do I need to do. I am desperate.
u can acces the phone sd in recovery..
Am I blind or have you actually FLASHED a Vibrant bootloader over Galaxy S??
Seems like you have issues with key combinations. Try using the Volume down with power button and see if it could get you to the download mode.
Also, if your device is being detected by the phone, use "adb reboot download" to reboot the phone into download mode.
Here is the situation: I had the MIUI rom on my phone but my phone didn't find my external SD. So i searched a bit on the internet and I found a guy who had the same problem and he said that I needed to flash the Vibrant bootloaders so I did that. But then everytime I started up my phone I came in Recovery mode. I couldn't even acces downoading mode anymore. So first I tried to flash two other roms(This one And this onebut the problem stayed the same. So I bought a JIG and then I tried to put this bootloaderon my phone but Odin said ERROR after a while. So then I tried to flash this one.
But now I can't even enter recovery mode. When I start up my phone I see a pictogram with my phone and the pc with the sign that I can't connect them.
And my computer also don't find my phone anymore so I can't flash anything anymore.
Please Help !
I will give 8 euros to the person who can tell me step by step(easy) what I need to do to make my phone working.
how to install miui?

Galaxy Note fails while booting (yellow triangle)

Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Can you exactly give the file name, which you have used to flash PDA section? and size of it
Titek said:
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Click to expand...
Click to collapse
1. It doesn't matter while flashing using PC Odin.
2. Are you sure about which ROM you flashed ( Suspecting you have flashed Custom ROM)
3. Their is way to remove Triangle (!) , you should use JIG
follow the link for more details.
http://forum.xda-developers.com/showthread.php?t=1354888
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
The file I could find using google was about 8Mo and the flash was quite fast.
(I used it for the PDA part)
I also referred to that thread :
(http://forum.xda-developers.com/showthread.php?t=1329360)
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: http://www.multiupload.com/YB9EL8D8O3
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
using the file for KKA, but then, next flashing, the yellow triangle...
I'm working right now but I can repost here in a few hours the exact name of the file I have found using google that I could not find over here.
Anyway, do you think I can "repair" it without any JIG USB?
And yes, it was on a custom rom (the phone is just new, only a few hours in my hands ) but it's not my first one (i could flash a HD2 and the Samsung Tablet with no problems...
Titek said:
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
Click to expand...
Click to collapse
This thing you did wrong, I have made lot effort to update Rooting guide here, still somebody How can find this guide i dont know.
Basically you have flashed with Netchip method, which was very first appeared, but later netchip also said, to not to use, b'coz it causing raise Flash counter
as well yellow triangle.
Now onwards remember, NEVER use PC ODIN to Flash Any Custome ROM/Kernel.
I am updating link here soon, how to reset your counter. You requires JIG for that
Edit : here is guide how to reset binaru count, n remove yellow triangle
http://forum.xda-developers.com/showthread.php?t=1354888
-------------------
BTW till you get JIG, just go to this thread http://forum.xda-developers.com/showthread.php?t=1424997 and download and flash ROM using PC odin(here it is stock ROM u can use it safely). you will get your phone working. later you can reset counter with JIG
Download my guide from here, how to update ROM, you can use Updating ROM with PC Odin section from guide.
Many thanks again, dr.ketan for such reply so fast
Hmmmm then I will have to wait for a JIG. I will order a JIG, it seems the price is not so expensive.
Thanks again for your comments and help, much appreciated
Ya jig is costing just 1-2 usd
Sent from my GT-N7000 using xda premium
dr.ketan said:
Ya jig is costing just 1-2 usd
Even you can make it at home, guide link is inside previous msg (how to use jig)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Titek said:
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Click to expand...
Click to collapse
See, JIG is required for totally different reason.
Your issue regarding, not connecting kies / Booting phone, won't be solved by JIG.
Jig can b use in two condition. One when you are unable to enter in download mode. I think, you dont have this issue
another To reset counter, for which you require JIG in your case.
Error you are facing right now during booting of device, can be solved by Reflashing ROM. You can flash any stock ROM with PC Odin, shud be enough to solve it.
Now regarding use of JIG, just enter in download mode, check Lt upper corner of devoce, it will have number of flash you have performed, i think in your case it must be 1 or more. which in normal case should be zero. Only To reset that counter, you needs Jig.
Thanks again.
Well, I download another stock rom but I got a "fail" (red color) above "id:com", when flashing on ODIN.
I am using Windows7 and tested the compatibility mode, the problem remains.
I have .md5 file that I put on PDA part. Then I click on Start but nothing, except the "fail" message.
When turning off the phone and on, I got the other message, said in my previous post :
"Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again."
So, Am I missing something.
About the download mode, the number is 7 in fact.
Oh I remember the file I wanted to flash via ODIN : netchip-cwm-update2.tar
It seemed to work just because the phone turned off and I got a "green" message that said that it was ok. (PASS).
I read one of your thread, when nothing works, so that man should go here :
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
but the file (link) is not working now, so I can not get the file to test :s
But since then, I can not boot on Android anymore...
Yes unfortunately link is down since 2 days
Ya thats i guessed when i read you have used superuser zip, i have said earlier in 1 msg, you have used netchip.
Anyway, once go to recovery (vol up +home+power)n wipe data, clear cache, clear dwlvic caxhe.
Then put phone in download mode. Close firewall/antivirus on pc, open odin, connect device with download mode(vol down+home+power), if id com glow yellow, thn proceed with start
Gudluck
Sent from my GT-N7000 using xda premium
The main problem is that, too.
I can not enter Recovery, I got the yellow triangle.
I can only go in download mode, and when turning off and on the phone, the message said above :s
is JIG the only way to solve all that?
is my phone "blocked"? I am trying to test another stock rom, I'll give it a try and let you guess what happens.
EDIT 22:37:
The flash with that rom (N7000XXLA4_N7000DREKL1_DRE) has failed, even if it is a stock one.
Can I try to use any other rom from another country? Before I tried to flash the rom, I saw it was a KKA. Can I try so with a LA3 or something else, still stock one?
Oh man, that's so bad....
I think I found the problem...
I am using Windows7 64 bits.
My wife is on WindowsXP and I am using Odin on her netbook, and it's quite better !
the flashing is going on.
Hey !!!! that's all good !!!!! ^^'
My Galaxy Notes is working again ^'^'
Maybe should it be mentionned to be careful when using Windows7 64 bits, if some other members would have the same problem when flashing their roms?
Congrates !
ya it is common problem(win7), many time it has been discussed , but it is not that everytime it not works, but it happens in few cases.
When reading your answer yesterday, I thought I might had a chance to make my Galaxy Note working again without JIG.
Now I've downloaded Samsung drivers, for Windows7 64 bits, and I can flash with no problem. I'm backing up and can use CWM
Thanks again for your help and answers
I had the same problem, but then I decided to use the ORIGINAL usb cable and see: it did the trick !!!. Even on Windows 10 64bit !.

Bricked Galaxy Ace

I'm sorry if this has been asked before but I don't think so... Anyway I had a perfectly working Galaxy Ace coming with stock Android 2.3.4. So I tried rooting it, and I did see the superuser icon but I couldn't apps into the SD card. So I ignored it and downloaded a custom rom and entered recovery mode, wiped data and cache first and rebooted. Then I installed the rom in recovery mode and it said installation successful but when I rebooted I got stuck at the "GALAXY ACE" page and I noticed a weird small blue triangle at the top left hand. And nothing happens. Please help it's nearly brand new! My parents don't know yet... If there is a way to use the com and download the stock rom please provide step by step instructions that was my first smartphone so much help would be appreaciated!
jleonnn said:
I'm sorry if this has been asked before but I don't think so... Anyway I had a perfectly working Galaxy Ace coming with stock Android 2.3.4. So I tried rooting it, and I did see the superuser icon but I couldn't apps into the SD card. So I ignored it and downloaded a custom rom and entered recovery mode, wiped data and cache first and rebooted. Then I installed the rom in recovery mode and it said installation successful but when I rebooted I got stuck at the "GALAXY ACE" page and I noticed a weird small blue triangle at the top left hand. And nothing happens. Please help it's nearly brand new! My parents don't know yet... If there is a way to use the com and download the stock rom please provide step by step instructions that was my first smartphone so much help would be appreaciated!
Click to expand...
Click to collapse
Am not an expert but i would take battery out then put back in holding volume down key home key and power key at sametime to put into download mode then flash your stock rom via odin to get it back running again
have you done a datwipe in cwm after installing? try that first
Hey there!
Before We get to ODIN
Start phone in recovery mode ( Center Button + Power Button ) and then:
- Do a Factory Reset
- Do Wipe Cache
Then Reboot
If he boots great!
If not and still remains at ACE screen do this:
1st - Download Odin 4.38 (http://www.4shared.com/rar/UqBhp5Qd/Odin_Multi_Downloader_v438_www.html)
2nd - Download Cooper.ops (http://hotfile.com/dl/138852983/36a55ea/Cooper_v1.0.ops.rar.html)
3rd - Go to http://www.sammobile.com/firmware/ and search firmware for your s5830
Then choose the rom that suits you best (download one from your country if possible)
After the above steps are done open odin
At "option" select - "One Package, Auto-Reboot And Protect OPS"
At "select OPS" - choose "Cooper.ops" (The file you´ve downloaded)
At bottom is "One Package" - In here put the file of the room you´ve dowloaded
Finaly put phone in download mode (Vol. Down + Power Button) and connect it to your PC.
Wait for odin to recognize your phone, a yellow sign will light up, ( you need samsung kies in your computer so odin recognize your phone)
And then hit "Start"
Wait about five minutes at the end your phone should reboot by itself
And that should be it
If your phone reboots but stuck ate samsung boot animation.
Remove Battery
Put it back again
Turn your phone into recovery mode ( Center Button + Power Button )
Do Wipe Factory/Reset and Wipe cache, reboot,
and your good to go!
I rebooted I got stuck at the "GALAXY ACE" page and I noticed a weird small blue triangle at the top left hand
Click to expand...
Click to collapse
the blue triangle isn't this CWM 5?
or if can you get to recovery mode try flashing the original stock recovery first
http://forum.xda-developers.com/showthread.php?t=1437426
then install a stock rom with Odin
and boot from the stock recovery to fix the phone boot
if recovery is working you should fix the phone easily with stock rom.
installing a stock rom will install the stock recovery by itself!
so no need to flash stock recovery before flashing stock rom!
Can someone please explain what went wrong here in the first place?
Sent from my S5830L using XDA App
Honestly i cannot tell!
But probably the custom rom wasn't compatible!
Or during the rom istallation something went rong
... only suposing
That blue triangle is coz of cwm 4
Sent from my GT-S5830 using xda premium
wellll some custom rom require pre installation of another rom... like INFINITY ICE CREAM SUNDAY they require CM& to be pre installed....
so i would suggest u to reflash 2.3.4 on ur ace using odin...
http://forum.xda-developers.com/showthread.php?t=1071970
if it locks on start screen
go in recovery mode and do a factory reset and cache reset... enjoy
then flash as per instructed on the custom rom page.....
You guys are all wrong .
It's because of CF-ROOT .
You guys should've known from the start LOL
Herpderp Defy.
We could have had it allllllllllllllllllllll
Rolling in the deeeeeeeeeeeeeeeeeep
EmoBoiix3 said:
You guys are all wrong .
It's because of CF-ROOT .
You guys should've known from the start LOL
Herpderp Defy.
We could have had it allllllllllllllllllllll
Rolling in the deeeeeeeeeeeeeeeeeep
Click to expand...
Click to collapse
What's that? I'm still a noob I dunno...
ambujpriyadarshi1991 said:
wellll some custom rom require pre installation of another rom... like INFINITY ICE CREAM SUNDAY they require CM& to be pre installed....
so i would suggest u to reflash 2.3.4 on ur ace using odin...
http://forum.xda-developers.com/showthread.php?t=1071970
if it locks on start screen
go in recovery mode and do a factory reset and cache reset... enjoy
then flash as per instructed on the custom rom page.....
Click to expand...
Click to collapse
For your information,icsunday does not need cm to be pre installed...what you said was completely wrong..
Sent from my SamsungGalaxyAce with my hands,take it or leave it
EmoBoiix3 said:
You guys are all wrong .
It's because of CF-ROOT .
You guys should've known from the start LOL
Herpderp Defy.
We could have had it allllllllllllllllllllll
Rolling in the deeeeeeeeeeeeeeeeeep
Click to expand...
Click to collapse
+1..i people don't know what they are talking about,then they shouldn't reply..
Sent from my SamsungGalaxyAce with my hands,take it or leave it
jleonnn said:
What's that? I'm still a noob I dunno...
Click to expand...
Click to collapse
CF-ROOT is a kernel..
Sent from my SamsungGalaxyAce with my hands,take it or leave it
Can someone please explain CF-ROOT to me pleaseeee
BTW Can someone give me a link for a good working stock rom for my ace? Thanks in advance
jleonnn said:
btw can someone give me a link for a good working stock rom for my ace? Thanks in advance
Click to expand...
Click to collapse
google google and google :d
Doo:DAce said:
google google and google :d
Click to expand...
Click to collapse
I mean a real link... The only link I see is to hotfile and for some reason I CAN'T DOWNLOAD T.T
I've made you a full tuturial!
in there was a link to samfirmware! In samfirmware is all the roms you could ever need!
Keep trying hotfile!
Cause of download limitations sometimes it takes a bit before you can download anything
SnowPluralism said:
I've made you a full tuturial!
in there was a link to samfirmware! In samfirmware is all the roms you could ever need!
Keep trying hotfile!
Cause of download limitations sometimes it takes a bit before you can download anything
Click to expand...
Click to collapse
Alrighty thanks... Cuz on hotfile I pressed download they told me the file was downloading but I couldn't find anything. But thanks nonetheless

status 7 error

hello i've been trying 2 get a new rom for my brother's SGS+
but almost every rom i try (mostly jelly bean and ics roms but also some gb ones) give me n error
when i try 2 install them through recovery mode,
i get error status 7, installation aborted
now i looked for this problem on the internet and it appears there r some solutions found on this link:
http://www.knowtechbetter.com/how-t...ry-cwm-while-installing-flashing-custom-roms/
however i did not understand any of this
i m not new in installing roms and such but i m not very femilier with all these "more complicated" things
i noticed at the comments that the first solution helped someone
and it looks easy, if any1 could explain me shortly how do i do this this would be very helpful.
thanks~
Install newer CWM.. you have to ask this in the special thread made for it
broodplank1337 said:
Install newer CWM.. you have to ask this in the special thread made for it
Click to expand...
Click to collapse
i have faemod v1.2 based on cwm 5.0.2.7 ..
and honestly i dont know which threat you are reffering to
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
mrjraider said:
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
Click to expand...
Click to collapse
if u could help me just a little more, i cant find it.
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
mrjraider said:
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
Click to expand...
Click to collapse
thanks i managed 2 install cwm 6
but i encountered a new problem.
i installed the non-touch verision and now i cant do the "select" option
it is supposed 2 be the power button but it doesnt work
so now i cant do anything..
also i tried rom manager but it just opens recovery mode for me
any way i can return to an old verision of recovery w/o using the reovery mode so i can go back and install the touch verision this time?
There are more buttons to use. If i can remember you need to use the menu button
mrjraider said:
There are more buttons to use. If i can remember you need to use the menu button
Click to expand...
Click to collapse
tried them all.. i am really stuck here
appearntly alot of ppl have this problem.
is there any way to install it through odin or some other app?
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
mrjraider said:
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
Click to expand...
Click to collapse
maybe im doing it wrong but odin doesnt even recognise the file.. and there is no guide there
i did try a odin flashable cwm V6 but its stuck on "setup connection" each time i try..
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Just flash TWRP and you're good to go
Sent from my GT-I9001 using xda app-developers app
mrjraider said:
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Click to expand...
Click to collapse
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
hey man relax... in wiki page you'll find cwm5.5.0.4 flashable zip and you can install it from recovery ( even from stock recovery if i remember corectly)... if you can't acces your phone you can copy it from pc to phone using recovery ( mounts and storage )... if you are stuck in recovery( you're phone boot in recovery only ) you'll need to flash the bootloader using odin.. also you can find the steps and necessary files in wiki and in cm10 by ivendor in firrst post ..Good Luck !!!
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
mrjraider said:
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
Click to expand...
Click to collapse
see the problem?
http://i39.tinypic.com/amp1ch.png
the thing is even tho i read your guide it seem like im doing something wrong..
for instance when i add the files both ops and "one package" file it doesnt see them so i have to write their location
shahaf321 said:
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
Click to expand...
Click to collapse
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
educk said:
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
Click to expand...
Click to collapse
i did try using his guide and i folowed it step by step
my only problem is that odin gives me that message i showed in my last post..
also untill i fix this soft brick i cant move on to recovery mode so
i need 2 fix that first..
the guide doesnt show anything related to what im doing wrong..
Someone with brains would have removed odin, and the ops file and redownloaded it again. Also save those on your desktop

my galaxy mini 2 doesn't work after chainfire 3d

Hi guys. I was using cyanogenmod 10 on my S6500D. Works good i think. And i can't play wild blood on my phone. I want to try chainfire 3d. After installing drivers for CF3D my phone is not working. Always restarting on ''samsung'' logo. I can't open recovery mod. I can't open download mod (may be i can sometimes i don't know) I tried to install orginal rom for mini 2. Doesn't work. Please help me. Sorry for bad english.
orome2 said:
Hi guys. I was using cyanogenmod 10 on my S6500D. Works good i think. And i can't play wild blood on my phone. I want to try chainfire 3d. After installing drivers for CF3D my phone is not working. Always restarting on ''samsung'' logo. I can't open recovery mod. I can't open download mod (may be i can sometimes i don't know) I tried to install orginal rom for mini 2. Doesn't work. Please help me. Sorry for bad english.
Click to expand...
Click to collapse
You have soft bricked your phone as CF3D drivers didn work as it was supposed to. First turn off your device by long pressing power key, this works many times even if you are in a boot loop(which is what you are experiencing now). Now like always try to enter recovery mode manually by the combination specified for your device (mine is power+home key+vol. up for recovery and power+home+vol. down for download). If you can enter recovery mode, wipe data and cache and if needed dalvik cache as well but it will take more time for your phone to start the first time after dalvik cache is wiped. This will probably fix your problem. And if it doesn then your next choice is flashing stock rom via odin. Pull your battery, insert it back after 10 seconds. Enter download mode manually and you know how to flash stock rom via odin i suppose. You can find many guides out there as well.. Hopes this helps...
haridevil99 said:
You have soft bricked your phone as CF3D drivers didn work as it was supposed to. First turn off your device by long pressing power key, this works many times even if you are in a boot loop(which is what you are experiencing now). Now like always try to enter recovery mode manually by the combination specified for your device (mine is power+home key+vol. up for recovery and power+home+vol. down for download). If you can enter recovery mode, wipe data and cache and if needed dalvik cache as well but it will take more time for your phone to start the first time after dalvik cache is wiped. This will probably fix your problem. And if it doesn then your next choice is flashing stock rom via odin. Pull your battery, insert it back after 10 seconds. Enter download mode manually and you know how to flash stock rom via odin i suppose. You can find many guides out there as well.. Hopes this helps...
Click to expand...
Click to collapse
i can't open recovery mod. and i can't find stock rom for mini 2. When i prees long power buton my phone doesn't turn off. Still restarting. Please help me guys
Dont worry. Pull battery for 10sec and see if you can enter download mode. check this for your stock rom. This will do for now. You can later search for your region or flash a custom rom.
http://www.samsungroms.com/firmware...00-gingerbread-2-3-6-s6500ailk1-italy-tim-rom
Let me know if it does..
didn't work again. Thank you for your helps but still same problem (sorry for bad English ) I can't reach recovery mod and my phone still restartings on samsung logo. Another solution for that problem? Please help me.
Remove the battery....and put it
Now go to recovery mode....and install a rom.....once I also face this problem
Samsung Galaxy Y-Jellyblast
i can't open recovery mod bro. I press all keys but nothing. I can open download mod only. But i can't do anything.
orome2 said:
i can't open recovery mod bro. I press all keys but nothing. I can open download mod only. But i can't do anything.
Click to expand...
Click to collapse
Dude..! Dont you rememeber..? I told you to enter download mode and use odin to flash the stock rom of which i provided the link..
me too
me too
haridevil99 said:
Dude..! Dont you rememeber..? I told you to enter download mode and use odin to flash the stock rom of which i provided the link..
Click to expand...
Click to collapse
i did it. But same problem still. Can i format my phone without recovery mod?
orome2 said:
i did it. But same problem still. Can i format my phone without recovery mod?
Click to expand...
Click to collapse
You flashed stock firmware using odin..? And, well.. you got two ops to access your phone other than using a Rom and that is recovery and download modes.
haridevil99 said:
You flashed stock firmware using odin..? And, well.. you got two ops to access your phone other than using a Rom and that is recovery and download modes.
Click to expand...
Click to collapse
you gave me S6500 italy stock rom. But i have S6500D. I downloaded S6500D stock rom russia from same site. But it didn't worked. I can reach download mod but i can't reach recovery mod. Can you help me?
orome2 said:
you gave me S6500 italy stock rom. But i have S6500D. I downloaded S6500D stock rom russia from same site. But it didn't worked. I can reach download mod but i can't reach recovery mod. Can you help me?
Click to expand...
Click to collapse
Sure.. I can help you. Check this.. It got what you need and it should work this time. Ignore the stuff mentioned at first of the article coz they are talking bout a perfectly working device and we are facing a worst case scenerio. Download the required files. Uninstall kies if you have it installed coz it will probably clash with Odin trying to access your device and report error. So have just the usb drivers installed and remove kies first. Next do as they say. It should be fine. Let me know if it worked.
http://u-smartphone.blogspot.in/2013/04/update-galaxy-mini-2-s6500-bulk2.html?m=1
haridevil99 said:
Sure.. I can help you. Check this.. It got what you need and it should work this time. Ignore the stuff mentioned at first of the article coz they are talking bout a perfectly working device and we are facing a worst case scenerio. Download the required files. Uninstall kies if you have it installed coz it will probably clash with Odin trying to access your device and report error. So have just the usb drivers installed and remove kies first. Next do as they say. It should be fine. Let me know if it worked.
http://u-smartphone.blogspot.in/2013/04/update-galaxy-mini-2-s6500-bulk2.html?m=1
Click to expand...
Click to collapse
now my phone stucks on samsung logo. But not restartings. I think it is good. I can't reach recovery mod still. So close
orome2 said:
now my phone stucks on samsung logo. But not restartings. I think it is good. I can't reach recovery mod still. So close
Click to expand...
Click to collapse
This might get you back your recovery. Flash this cwm.tar.md5 using odin. select the PDA option and select the .tar.md5 file you got now. Check if it restores your recovery and let me know.
http://www.4shared.com/file/MfJmh2bn/clockworkmod-5028tar.html
haridevil99 said:
This might get you back your recovery. Flash this cwm.tar.md5 using odin. select the PDA option and select the .tar.md5 file you got now. Check if it restores your recovery and let me know.
http://www.4shared.com/file/MfJmh2bn/clockworkmod-5028tar.html
Click to expand...
Click to collapse
i think my phone is dead. Cuz i did it. But still can't reach r. mod. I think i must go phone repair center
orome2 said:
i think my phone is dead. Cuz i did it. But still can't reach r. mod. I think i must go phone repair center
Click to expand...
Click to collapse
If you can enter download mode then dont give up. Try for odin flashable Roms and if you take your phone to service centre, dont tell them what really happened coz it will void your warranty. Tell them it happened while flashing the official stock rom update. It might save you from paying em and also losing your warranty..
haridevil99 said:
If you can enter download mode then dont give up. Try for odin flashable Roms and if you take your phone to service centre, dont tell them what really happened coz it will void your warranty. Tell them it happened while flashing the official stock rom update. It might save you from paying em and also losing your warranty..
Click to expand...
Click to collapse
good idea. But i don't know nomore roms. Can i install cyanogen or another rom via odin?
orome2 said:
good idea. But i don't know nomore roms. Can i install cyanogen or another rom via odin?
Click to expand...
Click to collapse
You can but should have odin flashable files. Well if you find any then you can try it. But trying the ones you got already might work as you got the logo now.
haridevil99 said:
You can but should have odin flashable files. Well if you find any then you can try it. But trying the ones you got already might work as you got the logo now.
Click to expand...
Click to collapse
ohh. Whatever. I mut go repair. I trierd a lot of ways but didn't work. I bored. Thank you for your helps.

Categories

Resources