Flash kernel before or after?? - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi everyone..
When I would flash a new Rom..
I should flash the kernel before or after flashing the Rom??
My second question..
Which is the best kernel for (AOSPA PARANOID 3)??
Sent from my GT-N7000 using xda app-developers app

If the ROM zip you are flashing contains a kernel, it will replace the existing kernel. Same goes for tar files flashed with Odin.
If you are on any stock ICS kernel, then don't wipe using its recovery. Flash a safe kernel first then wipe. After that flash your desired ROM.
Sent from my GT-N7000 using xda app-developers app

Thx a lot.. but what about the best Kernel for AOSPA??
Sent from my GT-N7000 using xda app-developers app

Im using the cm10.1 kernel with pa3. Nothing to complain.
Sent from my GT-N7000 using xda app-developers app

Related

Flashing kingdroid v4.1.1

Im currently using v4.1 can i flash the rom without any wipe?
Sent from my GT-N7000 using xda premium
yes
Do i need to flash abyss kernel? So what i do is just flash v4.1.1?
Sent from my GT-N7000 using xda premium
Dude do i need to flash abyss kernel?
Sent from my GT-N7000 using xda premium
Like my above reply.. Yes you need to flash abyss 4.2 n then flash kingdroid

Which version of CWM do i install?

Hi
I have rooted my note currently stock on 4.0.4 on LRK build. I have also successfully flashed the hydracore kernel as per the thread in the general section.
But i cant seem to find through searching which version of CWM i should install so i can flash paranoid android.
Please help
Sent from my GT-N7000 using xda app-developers app
If you installed.hydracore then cwm will.be automatically installed. Just go.into recovery mode.and.check
Sent from my GT-N7000 using xda premium
Thank you.
Sent from my GT-N7000 using xda app-developers app

Cyanogenmod on ics 4.0.3 stock??

Running rooted stock ics 4.0.3 and want to install cyanogenmod, when i flash from cwm and reboot it doesn't go pass the boot screen even after 30 minutes, so i recovered my stock took.
What are the steps please?
Sent from my GT-N7000 using xda app-developers app
What kernel are you using? Did you do a clean install doing full wipes before flashing cm9?you need to.
Sent from my GT-N7000 using xda premium
Once the rom is successfully installed, do a wipe data/factory reset
Sent from my GT-N7000 using xda premium
My kernel is stock, n7000jplpd.
Do you guys mean i don't have to downgrade to ginger bead it anything and can do it from ics? (the flashing of cm9)
Sent from my GT-N7000 using xda app-developers app
And no i didnt do a factory reset, only wiped dalvik, wont that just do the job as well? I want to make sure cm 9 is flashable with my stock ics
Sent from my GT-N7000 using xda app-developers app
go to philz thread and download the jplpd kernel zip and place it on external sd.
boot into recovery and install the zip.
Once done reboot into recovery again and this time you should see cwm touch.
If yes, then
wipe data / factory reset
wipe cache partition
wipe dalvik cache
format / system
install zip from sd
then point to the rom.
Sent from my GT-N7000 using xda premium
Can i know the reason of installing a jplpd kernel please?
Sent from my GT-N7000 using xda app-developers app
abdoabook said:
Can i know the reason of installing a jplpd kernel please?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
If you flash from stock ics kernel you'll get instant brick, you need safe philz kernel to flash from
Sent from my GT-N7000 using xda premium
Will i be able to recover my stock kernel incase some thing goes wrong?
Sent from my GT-N7000 using xda app-developers app
abdoabook said:
Will i be able to recover my stock kernel incase some thing goes wrong?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
You can reflash stock rom which will put it back to factory state.
Sent from my GT-N7000 using xda premium
Can you link me to the stock kernels?
Sent from my GT-N7000 using xda app-developers app
abdoabook said:
Can you link me to the stock kernels?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Stock kernels thread here: http://forum.xda-developers.com/showthread.php?p=19871471
Sent from my GT-N7000 using xda premium
Thanks a dozen
Sent from my GT-N7000 using xda app-developers app
I can restore my stock room a well from cm9 our 10 right?
Sent from my GT-N7000 using xda app-developers app
using PC odin : Yes
nandroid restore : Yes , Use only if nandroid backup includes a safe kernel
Safe kernel is the key here otherwise you're up for an uneccesary brick.
Sent from my GT-N7000 using xda premium
Cool thanks
Sent from my GT-N7000 using xda app-developers app
abdoabook said:
Running rooted stock ics 4.0.3 and want to install cyanogenmod, when i flash from cwm and reboot it doesn't go pass the boot screen even after 30 minutes, so i recovered my stock took.
What are the steps please?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
1)Well be sure you are on Safe Kernel.
2)Try redownload the rom
3)If doesn't Working install CM10,Its JB Rules this days ;p

Cm10 kernel to philz?

So I'm running chasmodos cm 10 kernel with slim bean rom, i want to flash eybees rocket rom the leaked galaxy note jelly bean, so im wondering what to do. Please help me
Sent from my GT-N7000 using xda app-developers app
Boot into recovery, wipes, and flash the new rom.
Sent from my GT-N7000 using xda premium
No need for philz kernel?
Sent from my GT-N7000 using xda app-developers app
abdoabook said:
No need for philz kernel?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
You're already on a safe kernel, no need for phillz.
Sent from my GT-N7000 using xda premium

How to flash recovery in rom Stock

i have installed rom Stock for Ku5900.pls help me
Version? Why dont you patch it with cwm?
Sent from my LG-P760 using xda app-developers app

Categories

Resources