Hello i have a rly big problem with mini
when i go into android recovery i gain an error
Code:
-- Appling Multi-CSC--
multicsc : opera mini[lib] reset
.
Applied the CSC-code `AT`.
i cant install custom rom coz when i try to instal custom recovery i gain a lot of errors(inside CRM)
my phone is S5570XWKTH and rooted via this pack http://forum.xda-developers.com/attachment.php?attachmentid=913955&d=1329885670
i still gain same error and everything depends on remove this error in android recovery
can som1 help me???
i searching but i found nothing
The simpliest way to help is: READ!!!
C'mon! What are you doing? Be happy if your phone is even booting!
Actually I can't belive that you found no tutorials to flash CWM.
read and understand before flash rom
it isnt simple
i gain this error after flashing clean stock rom from samsung
so i dunno what i doing wrong
pschemo said:
it isnt simple
i gain this error after flashing clean stock rom from samsung
so i dunno what i doing wrong
Click to expand...
Click to collapse
This is not an error. And for flashing cutom ROM, the tutorials will seve you well.
Related
Hi guys,
I have a serious problem,
Ics rom was not working properly so I lost the root.
Ok, but then I tried to install over pc Odin some older stock roms and guess what?The installation was ok but when the system starts I get stuck and for all FC,,,so i cant do nothing i cant root again and use my backups from recovery.
What i to do guys?
Please help
I try couple roms to back on Gingerbread but allways the same.
TNX
dzontra11 said:
Hi guys,
I have a serious problem,
Ics rom was not working properly so I lost the root.
Ok, but then I tried to install over pc Odin some older stock roms and guess what?The installation was ok but when the system starts I get stuck and for all FC,,,so i cant do nothing i cant root again and use my backups from recovery.
What i to do guys?
Please help
I try couple roms to back on Gingerbread but allways the same.
TNX
Click to expand...
Click to collapse
Enter Recovery mode . and do Wipe/factory Reset & Wipe cache.
Hello, everyone. This is my first post so excuse my newbliness, if any is noticed...
I've been trying to flash my Mini for quite a while and all I got was a series of epic fails. The ROM that I was trying to flash is the Unofficial CyanogenMod 10, by rohan007; to be more specific, Unofficial CM10_15-12-12, which is the latest update, I think. I was using Cyanogenmod Recovery Image 5.0.2.6-tass which worked quite fine, giving me the advanced options and everything, but each time I would try to install zip from sd, I would get the following error:
~some incomplete log text above, not sure if it matters~
/E:Error in /sdcard/customrom/CM-10_15-12-12.zip
(Status 7)
Installation aborted.
Of course, I followed the exact instructions on how to flash a custom ROM; Clear cache partition, Wipe Data/Reset, Clear Dalvik Cache, etc...
My phone is rooted, by the way. I used the universal_gb_root_v25.zip to root my phone, since it was the only method that worked.
Then, after further investigation, I found out that the image version 5.0.2.6 sometimes fails to intall a custom ROM. So, I found the ClockWorkMod Touch Recovery Lilg Version for Galaxy Mini, CWM TOUCH 5.2.0.8 version. And when I flashed it, I just got "Install from sdcard completed" log message. Since I didn't got any advanced options, I tried to flash the ROM by selecting the option to apply update from sdcard and yet again, I got the following error:
~again, some incomplete log text above, not sure if it matters~
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
Then, when I rebooted my system, my phone got stuck on the Samsung GALAXY mini GT-S5570I text and now, every time when I press the power button, it keeps doing the same! I'm seriously getting frustrated here... Anyways, I can only go to the Android system recovery, and the Cyanogenmod system recovery and that is it. Also, I can still manipulate my data from the sd card. (Move and remove files from it, I mean).
One more thing about the Android system recovery. Now I get the log text saying:
-- Appling Multi-CSC --
E:failed to mount /system (Invalid argument)
E:failed to mount /system (Invalid argument)
And obviously, I did something(s) wrong in the whole process, so I beg you to help me resolve this issue. Thank you.
If you need any additional data about the whole bundle of problems, I will be more than glad to post them in my next reply.
see if odin detects your phone, and reflash cwm.
yackovsky said:
see if odin detects your phone, and reflash cwm.
Click to expand...
Click to collapse
ODIN MODE works, reflashing only works with image version 5.0.2.6...
As far as I know ...
we can't flash CWM in GT-S5570i
we can use in temporary only ....
this mean we can use CWM 5.0.2.6 in CWM mode and after reboot the phone goes into original CWM mode.
What I would u to do is ...
If u can go into CWM recovery mode then wipe data / Factory reset
if this doesn't help ...
Go into download mode and flash with original firmware using ODIN ...
shwe said:
As far as I know ...
we can't flash CWM in GT-S5570i
we can use in temporary only ....
this mean we can use CWM 5.0.2.6 in CWM mode and after reboot the phone goes into original CWM mode.
What I would u to do is ...
If u can go into CWM recovery mode then wipe data / Factory reset
if this doesn't help ...
Go into download mode and flash with original firmware using ODIN ...
Click to expand...
Click to collapse
For the CWM, I know. You have to flash it every time on reboot on the android system recovery to get it working.
I tried with factory reset several times and that did nothing. Download mode, also nothing.
So the best solution for me would be to find the stock firmware on the internet and flash that. I'll tell you how that went...
Also, when I try to format system, I get an error: "Error mounting /system! Skipping format... Done"
So for the future, is there any other way, besides CWM, to do a full, complete wipe of the Android OS?
Don't flash gts5570 roms on gts5570i for gawds sake, unless you want to brick your phone...
yackovsky said:
Don't flash gts5570 roms on gts5570i for gawds sake, unless you want to brick your phone...
Click to expand...
Click to collapse
Eh... It's too late for that now... Darn it. Any good methods on how to unbrick it? And, can I take it to the service shop to let them fix it?
Symeonus said:
Eh... It's too late for that now... Darn it. Any good methods on how to unbrick it? And, can I take it to the service shop to let them fix it?
Click to expand...
Click to collapse
if your phone gets detected by odin, just flash any official firmware from samfirmware.com and it's done. if not, hopefully you're still under warranty, then only samsung service center can help you. play dumb, don't mention rooting, flashing, custom roms and such...
yackovsky said:
if your phone gets detected by odin, just flash any official firmware from samfirmware.com and it's done. if not, hopefully you're still under warranty, then only samsung service center can help you. play dumb, don't mention rooting, flashing, custom roms and such...
Click to expand...
Click to collapse
YAY! I UNBRICKED MY PHONE! All is working just fine. Now then, if anything gets seriously wrong, I know what to do. Thank you, yackovsky, for your help.
It seems that all of those errors were caused by me trying to flash GTS5570 ROM on GTS5570I.
Hey all
I'm posting this because i haven't found any posts similar.
I have a rooted galaxy ace 5380i and recently i decided i wanted to change my rom ( i was on Gingerbread)
So first i needed to flash a cwm recovery zip. I did but since then the phone won't boot. I can access recovery mode but it's the system recovery mode. I can only enter clockworkmod recovery by installing it. As soon i switch the phone off it puts it back to system recovery. I tried flashing different versions but they all came up with status 7 error Installation aborted... I also tried flashing roms directly but with no success.. Please help me out here, i'm in a lot of trouble without a phone..
samrosslaye said:
Hey all
I'm posting this because i haven't found any posts similar.
I have a rooted galaxy ace 5380i and recently i decided i wanted to change my rom ( i was on Gingerbread)
So first i needed to flash a cwm recovery zip. I did but since then the phone won't boot. I can access recovery mode but it's the system recovery mode. I can only enter clockworkmod recovery by installing it. As soon i switch the phone off it puts it back to system recovery. I tried flashing different versions but they all came up with status 7 error Installation aborted... I also tried flashing roms directly but with no success.. Please help me out here, i'm in a lot of trouble without a phone..
Click to expand...
Click to collapse
Are you sure you are flashing the recovery for 5830i and not 5830 ??
Hi ,
I have followed the the procedure 【Guide】How To flash ANY Captivate ROM from Stock (including ICS) to upgrade my Froyo 2.1 to any latest rom but it failed to do so due to error
Installing:SDCARD:Rom_name
Finding update package...
Opening Update package.......
Installing update.....
E:Error in /mnt/sdcard/Rom_name
(status 0)
Installation aborted
Click to expand...
Click to collapse
. I have now CWM recovery V2.5.1.0 Speedmod ULFX installed ( Green text one) . I have learned in so many posts that this version of CWM is too old to install recent ROMs . I've tried below rom but couldn't make that work :
CyanFox Rom
omni-MACKAY_ROM-4.4.2-20131217-galaxysmtd
I tired :
Wipe out cash
User data
Please help me on this
byazid said:
Please help me on this
Click to expand...
Click to collapse
Read carefully and follow this Guide. For 4.3.x and 4.4.x based ROMs see installation instructions in corresponding threads.
Val D. said:
Read carefully and follow this Guide. For 4.3.x and 4.4.x based ROMs see installation instructions in corresponding threads.
Click to expand...
Click to collapse
Hi,
Thanks for your reply. I've finally made my way to install [ROM][JB] [4.3] Avatar ROM for Samsung Captivate but it has just too many bugs.My keyboard is not working and keeps on crashing. Now i have CWM 6 installed and which helped this ROM installed. Regarding other ROM i have mentioned here is still giving me the same error.
Any idea?
byazid said:
Any idea?
Click to expand...
Click to collapse
Describe exactly what you did starting from stock 2.1 ROM.
Val D. said:
Describe exactly what you did starting from stock 2.1 ROM.
Click to expand...
Click to collapse
Hi,
I was finally able to flash the AVATAR rom . I messed around with installing latest google apps and which made the keyboard crashed , Now its working like charm ,
However, here is what i did.
1. I followed the guide 【Guide】How To flash ANY Captivate ROM from Stock (including ICS) to upgrade my Eclair 2.1 . Did exactly what was in the tutorial and succeed . ** Just a note- I missed to copy ROM in the SD card , which i managed to do later by mounting USB storage from CWM .
2. I went for flashing and it was always giving me the error when i tried to flash my phone with the rom CyanFox Rom
3. Then i downloaded the rom AVATAR and went for flashing , suddenly the phone rebooted ( Still it did not install the ROM) and a new version of CWM 6 appeared with Blue text . From there i flashed the new ROM and it was a success.
Currently i am running my phone without any problem .
However, I still can not flash below ROM
CyanFox Rom
omni-MACKAY_ROM-4.4.2-20131217-galaxysmtd
do you have any idea on how to make it work ?
- stop asking same questions in 2 different threads, please
- read carefully the Guide in post #2 ant try to understand the process
- read carefully installation instructions for the ROMs you want to try
- avoid installation of experimental/ported ROMs as your first Custom ROM
- be careful what partition setup is needed for the ROM you want to install
- don't change default CM kernel for CM10.2 and up
Status 0
Status 0 means that you have a wrong script (for your phone). The script in "/META-INF/com/google/android" folder. I doubt that it's the ROM's problem. I also flashed CyanFox 4.4 for Galaxy S II. But had to flash CWM 6.0.4.x first. It worked only then, it didn't even flash using CWM 6.0.3.
So I think you can also flash CWM 6.0.4.x on your cappy and try this?
So I posted a help thing about EFS a while back and didnt get to much help with that but i managed to figure things out. Now however
ive got myself into another predicament i cant seem to get out of.
So, from the start, i have a galaxy s3 (GT i-9305T) it was rooted, i still had the stock rom, but was running the beoffla kernal.
The idea was to download and install "JustArchi I9300XXUGML2 stock, deodexed and all the rest" then start finding
some nice themes. Ive got philz_touch_6.07.9-i9305.tar installed for my recovery.
This is where the trouble starts...
So first off i wipe the cache and the davik cache, go to install the rom then i get this: (ill go from installing update)
assert failed: write_raw_image (" /tmp/boot.img" , " /dev/block/mmcblk0p5" )
E: Error in /storage/sdcard1/Just archi........zip
(Status 7)
Installation aborted
Now i looked up a whole heap of pages to see if i could sort it out myself and i tried a few different things,
none of which have prevailed. First i tried to reflash an insecure boot image then try again, nup. I tried to
flash back to stock recovery and re format (No errors) then back to custom. Mounted /data and /system
and re formatted which worked with no error, still same error when flashing rom though. Also tried flashing
with different custom recovery, no luck there either.
There were a few other things i tried but i cant really remember what i did because
this has been a problem for a while now. Some of the pages i looked over for
information were:
http://www.droidforums.net/forum/android-hacks-help/26658-assert-failed-write_raw_image-tmp-boot-img.html
http://forum.xda-developers.com/showthread.php?t=1045887
And this is the one im on at the moment, im currently downloading a stock rom from sammobile to try flash.
http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305t-10-2-upgrade-boot-stops-unable-t2406422
"UPDATE"
Finished downloading the stock rom, tried to install with philz recovery and got this:
Installing: /storage/sdcard1/I9305TDVBME2_I9305TTELBME1_TEL (STOCK).zip
Finding update package...
Opening update package....
Installing update...
Installation aborted.
And thats it, no kind of specific error codes or anything.
Thanks in advance to anyone who can help me out,
really stuck on this one.
IIEsoticoII said:
So I posted a help thing about EFS a while back and didnt get to much help with that but i managed to figure things out. Now however
ive got myself into another predicament i cant seem to get out of.
So, from the start, i have a galaxy s3 (GT i-9305T) it was rooted, i still had the stock rom, but was running the beoffla kernal.
The idea was to download and install "JustArchi I9300XXUGML2 stock, deodexed and all the rest" then start finding
some nice themes. Ive got philz_touch_6.07.9-i9305.tar installed for my recovery.
This is where the trouble starts...
So first off i wipe the cache and the davik cache, go to install the rom then i get this: (ill go from installing update)
assert failed: write_raw_image (" /tmp/boot.img" , " /dev/block/mmcblk0p5" )
E: Error in /storage/sdcard1/Just archi........zip
(Status 7)
Installation aborted
Now i looked up a whole heap of pages to see if i could sort it out myself and i tried a few different things,
none of which have prevailed. First i tried to reflash an insecure boot image then try again, nup. I tried to
flash back to stock recovery and re format (No errors) then back to custom. Mounted /data and /system
and re formatted which worked with no error, still same error when flashing rom though. Also tried flashing
with different custom recovery, no luck there either.
There were a few other things i tried but i cant really remember what i did because
this has been a problem for a while now. Some of the pages i looked over for
information were:
http://www.droidforums.net/forum/android-hacks-help/26658-assert-failed-write_raw_image-tmp-boot-img.html
http://forum.xda-developers.com/showthread.php?t=1045887
And this is the one im on at the moment, im currently downloading a stock rom from sammobile to try flash.
http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305t-10-2-upgrade-boot-stops-unable-t2406422
"UPDATE"
Finished downloading the stock rom, tried to install with philz recovery and got this:
Installing: /storage/sdcard1/I9305TDVBME2_I9305TTELBME1_TEL (STOCK).zip
Finding update package...
Opening update package....
Installing update...
Installation aborted.
And thats it, no kind of specific error codes or anything.
Thanks in advance to anyone who can help me out,
really stuck on this one.
Click to expand...
Click to collapse
Can anybody at all shed some light on my situation,
or at least a place for me to start learning myself...
Hi.
If you downloaded the stock ROM from sammy mobile are these not meant to be installed via Odin?
There are a few post if you search for some of the pre rooted stock ROMs that you can flash with odin.
I would start from there.
Sent from my GT-I9305 using xda app-developers app
johnnyblaze1977 said:
Hi.
If you downloaded the stock ROM from sammy mobile are these not meant to be installed via Odin?
There are a few post if you search for some of the pre rooted stock ROMs that you can flash with odin.
I would start from there.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
The roms i downloaded from samsmobile were in .zip files, which im pretty
sure has to be flashed with one of the custom recoveries.
Thanks though
at first seems you tried to flash rom designed for i9300
then, you downloaded an ODIN image and you have to flash it by ODIN, no way you'd flash it over any recovery
to be more specific:
unzip the file I9305TDVBME2_I9305TTELBME1_TEL (STOCK).zip you downloaded, you should get a huge file with extension of .md5 or .tar
read in the forums how to use ODIN to flash firmware
adamuadamu said:
at first seems you tried to flash rom designed for i9300
then, you downloaded an ODIN image and you have to flash it by ODIN, no way you'd flash it over any recovery
to be more specific:
unzip the file I9305TDVBME2_I9305TTELBME1_TEL (STOCK).zip you downloaded, you should get a huge file with extension of .md5 or .tar
read in the forums how to use ODIN to flash firmware
Click to expand...
Click to collapse
Yes ive just done this now and flashed the stock rom with odin
and i think everything has gone well (im not sure as my screen is
water damaged but i did here boot audio only once) so im
letting my phone sit in a bag of rice in pieces for the night
and am going to check things out tommorrow.