Related
My note is 2.3.6 , N7000LA2, now kernel is XXKKA,
I am not an expert, so I rooted in a wrong way then causing yellow triangle, But i removed the triangle finally
Actually I want to flash andriod 4.0 / other ICS theme rom, what procedure I should do now??
1. Is my note not a correct kernel now??
(I feel that the battery consumed faster than before, & not as smooth as than before getting yellow triangle)
2. Can I use a regular way (using odin to root back the right kernel & flash rom)?
3. my cwm mgr is not working correctly, how should i do??
Please advise ..
Many Many many thanks!
Do you have root working now?
If yes, update CWM, you can get proper kernel from my thread 'How to Root'(c signature for link)
after that you can update to any ROM with CWM
dr.ketan said:
Do you have root working now?
If yes, update CWM, you can get proper kernel from my thread 'How to Root'(c signature for link)
after that you can update to any ROM with CWM
Click to expand...
Click to collapse
Thank you so much!
My colleague's fd finally helped me flash a new kernel ([email protected]#3)
But I have some questions
1) which version is this kernel??
2) can i keep this kernel , then flash another 4.0 rom??
3) if i dont want to use odin (pc version) to flash, can i use mobile odin or cwm to flash?
what exact procedure i have to do?
please advise..
thanks !!!
this is abyssnote kernel, universal
you can use CWM to update 4.0 ROM, put file on SD card n boot in recovery.
select flash zip file, point to ROM file, confirm it by saying ye, done.
if get bootloop, wipe cache, wipe data (it will wipe off data so take backup b4 proceeding)
dr.ketan , really thanks for your prompt reply
but I am now in another bad situation..
I flashed something wrong & the note keep rebooting, & then now cannot get in the system , just stop at the N7000 welcome page,
But i can go to CWM recovery
get into recovery, wipe cache, wipe delvic cache
still not works wipe data (you will lose data) This is routine for 4.0 based ROM
And wat u mean by 'something wrong', you are not sure it was custom ROM file?
If nothing works then go to download mode n flash older Stock ROM with PC odin
dr.ketan said:
get into recovery, wipe cache, wipe delvic cache
still not works wipe data (you will lose data) This is routine for 4.0 based ROM
And wat u mean by 'something wrong', you are not sure it was custom ROM file?
If nothing works then go to download mode n flash older Stock ROM with PC odin
Click to expand...
Click to collapse
Thanks dr.ketan!
But it is not 4.0 based rom yet, just a 2.3.6, official rom (before "broke" )
So, should i still follow your method to do??
or should i get into recovery, try to flash the stock rom N7000OZSLA2 ?
I think i flashed the wrong version:
http://forum.xda-developers.com/showthread.php?t=1415567
Now I find I cant flash any rom by CWM....
"installation aborted"
Have u wipe data ? If not do it first thn flash stock rom using pc odin
Sent from my GT-N7000 using xda premium
thanks ketan!
I really didnt wipe data, but finally flash stock rom by pc odin
done by following your post , thats really useful!
I flash hk version LA2, but cant root
& then flash KJ1 Factoryfs, got the CWM
lastly I flash the abyssnote kernel
so is my SGN now contains a KJ1 rom?
can i flash back to LA2 without losing the root?
or is there any big differences between KJ1 & LA2??
& one more, I want to add the battery %, where can i find/search the suitable one for my SGN
Thanks!
s42715 said:
thanks ketan!
I really didnt wipe data, but finally flash stock rom by pc odin
done by following your post , thats really useful!
I flash hk version LA2, but cant root
& then flash KJ1 Factoryfs, got the CWM
lastly I flash the abyssnote kernel
so is my SGN now contains a KJ1 rom?
can i flash back to LA2 without losing the root?
or is there any big differences between KJ1 & LA2??
& one more, I want to add the battery %, where can i find/search the suitable one for my SGN
Thanks!
Click to expand...
Click to collapse
Now you can flash to la2 with CWM n keep cf-root when ask
Or use mobile odin n enable everroot option in mobile odin n flash
Sent from my GT-N7000 using xda premium
Thank you so much ketan!
I got LA2 n keep the cf-root now!
One thing I want to ask :
Is any roms to flash can follow the below procedure?
or which situations cannot follow this procedure:
Thanks.
2. CWM recovery (you need Root + CWM on existing ROM. Get )
Download the ROM. Extract it.
Create folder /sdcard/external_sd/firmware (thats folder "firmware" (lowercase) on your external SD card) (see image)
Click to expand...
Click to collapse
This is for Stock ROM only
If you want to flash custom rom, u have to select flash zip option, not 'flash stock firmware' option
Hi,
This may be a noobish question, but if I want to experiment with the new ICS builds, will I be able to simply restore a nandroid to revert to the way I had it before on GB?
octavian90 said:
Hi,
This may be a noobish question, but if I want to experiment with the new ICS builds, will I be able to simply restore a nandroid to revert to the way I had it before on GB?
Click to expand...
Click to collapse
Yes you can. Here are the detailed steps for reverting to GB from ICS.
--Download AbyssNote 4.2 kernel with redpill touch recovery Or Abyss 3.9 Kernel (for some users where the 4.2 kernel haven't worked 3.9 worked perfect)from here- http://forum.xda-developers.com/showthread.php?t=1362424 .
--Now first put this zip on your SD Card before you try to flash anything or restore anything.
--Now boot into recovery - Volume up + Home + Power
--Choose - install zip from SD Card
--Navigate to your Abyss kernel 4.2 or 3.9 zip and flash it
--After flashing is complete- go back to the Recovery start menu
--Go to advanced > reboot recovery
--This will reboot the phone directly to new recovery - Hyperdroid Redpill Recovery
--Now go to Wipe Menu and wipe cache, dalvik and do your factory reset
--After this start your restore from nandroid backup , or flash any GB rom !
Cheers!! Enjoy your Note!
Hit thanks if it helped!
Hi abhi...
I heard that if you're coming from ICS Stunner to Nandroid or Flashed GB Rom, you should downgrade to AbyssNote 3.9 Kernel instead.
Have you experienced such a thing?
source is below:
http://forum.xda-developers.com/showthread.php?t=1599229&highlight=ics+stunner
abhisahara said:
Yes you can. Here are the detailed steps for reverting to GB from ICS.
Download AbyssNote 4.2 kernel with redpill touch recovery from here- http://forum.xda-developers.com/showthread.php?t=1362424 .
Now first put this zip on your SD Card before you try to flash anything or restore anything.
Now boot into recovery - Volume up + Home + Power
Choose - install zip from SD Card
Navigate to your Abyss kernel 4.2 zip and flash it
After flashing is complete- go back to the Recovery start menu
Go to advanced > reboot recovery
This will reboot the phone directly to new recovery - Hyperdroid Redpill Recovery
Now go to Wipe Menu and wipe cache, dalvik and do your factory reset
After this start your restore from nandroid backup , or flash any GB rom !
Cheers!! Enjoy your Note!
Hit thanks if it helped!
Click to expand...
Click to collapse
leafsacc said:
Hi abhi...
I heard that if you're coming from ICS Stunner to Nandroid or Flashed GB Rom, you should downgrade to AbyssNote 3.9 Kernel instead.
Click to expand...
Click to collapse
Stick to Abyss 4.2!! tried and tested numerous times!!
However once kernel is flashed make sure to reboot the recovery from the kernel, it will reboot into the newly flashed kernel and then try to restore your nandroid.
Just follow what Abhi said and it will be a smooth ride for you mate!!
Hi,
I have very limited experience with my brand new SG note.
Just a few quick questions:
1. I currently have midteam 1.1 installed.
2. If I create a cwm/rom manager backup of the current rom, can I reboot to cwm recovery and simply restore (which I did with lots of struggles.
Restoring after removing sim card worked eventually and that may have nothing to do with restore; but it worked!)?
Would Abyss 4.2 in place have made the recovery smoother?
Or
It is required only if I want to go back to GB again?
3. Can I flash Abyss on top of my current ICS, regardless?
I hope I have put my question properly.
cheers
The only ,I repeat the only safe ICS ROM is cm9 official ,if you install that then you can restore your GB nandroid backup normally from CWM
But with any other ICS ROM you'll have a high chance of bricking if you so a restore or flash from CWM .the reason being is the leaked kernel which is being used in said ROMs have a faulty erasing script and may cause a corrupted nand drive ,thus a permanent brick
Read the public service announcement sticky first before flashing anything.
Hi guys just thought id post a guide of how i install ics stunner rom fully rooted and fully clean it works for me and works for others and may work for you
This way will format (wipe) your internal memory be warned some will say its not needed but for me its the best way to have a clean install and its only a guide for people who maybe stuck or with errors so here goes
1) flash a stock rom with odin pc (i use kk9) from here http://forum.xda-developers.com/showthread.php?t=1424997 make sure its directly rootable
2) flash the right CF_Root from here (ie kk9) with odin pc http://forum.xda-developers.com/showthread.php?t=1331784
3) once done let rom settle a bit and boot into cwm and do the following
wipe data/factory reset
wipe catch
wipe dalvik
wipe bat stats
go to mounts and storage and format everything in there (data ect)
fix permissions
reboot recovery
4) once back into recovery i always do the above again (3) just to be really clean reboot recovery
5) once back into recovery go to mounts and storage and mount usb and transfair your downloaded ics stunner rom and when done unmount and flash and all done
6) Use triangle away to reset counter and remove triangle http://forum.xda-developers.com/showthread.php?t=1494114
ive done it this way many times and never had no ploblems with root or any silly problems that arnt already posted in the OP
anyone gets stuck ill help as much as i can but just thought id post the way i do it and ive never had no problems
I wish to try this rom but i'm afraid with this ... My dream, rom stock with ICS and Premium Suite with full rooted ... I'm waiting for this
What about the ICS Repack step in the original ICS stunner thread? Don't we have to perform it?
needachange said:
What about the ICS Repack step in the original ICS stunner thread? Don't we have to perform it?
Click to expand...
Click to collapse
Neobuddy released a new way of installing which some people reported they wasn't getting full root yet the way I've done it and done it a few times I've never had a problem with root like I said it has worked for some so may work for others
You need to flash REPACK with Mobile ODIN and Inject EverROOT!
Next0r said:
You need to flash REPACK with Mobile ODIN and Inject EverROOT!
Click to expand...
Click to collapse
Not necessary as the new way of installing implanted by neobuddy has worked this way also I've tried with imilka rom and have full root
I feel this much easier if you're on a rooted GB Note.
1) copy Chainfire-Repack (790MB), Triangle-Away, Custom NOTE Rom, Titanium-Self-Package (Titanium will generate this on request), your current custom ROM onto the external and the internal SD card
2) save all Titanium Backups + NANDROID Backups to your PC .
3) select in Mobil ODIN that Chainfire-Repack.tar from your preferred SD card, activate EveryRoot, Inject SuperUser und Wipe Data .
4) Flash!
5) Note will boot in recovery!
6) FULL WIPE
7) Flash your custom ROM
8) Reboot
9) If you wish - reboot again to recovery and install your Titanium-Self-Package (.zip)
10) Reboot into you "new" device and restore you apps with Titanium
Thank you~
Sent from my GT-N7000 using xda premium
galaxy note problem
hello
i havs problem with my galaxy note
actually its not starting because i tried to install the ics on it
now it is not starting in downloading or recovery mode also
so kindly please any one help plSsssssss
plssssss help
Take out the battery. Keep ur phone without battery for about a minute. Then put in the battery and hit the power button. If not hit the volume up(for recovery) or down(for download mode) + home + power button.
Hope this works for you!
BOOMED from my BOMBASTIC NOTE
i an rooted GB and want to flash ICS stunner 5.0
do i use the lp1 or lp5 kernel??
or do i not flash the kernel at all and just go ahead with flashing the stunner ROM??
tysonraylee said:
i an rooted GB and want to flash ICS stunner 5.0
do i use the lp1 or lp5 kernel??
or do i not flash the kernel at all and just go ahead with flashing the stunner ROM??
Click to expand...
Click to collapse
Let the kernel be what comes with the rom. You can try flashing different modems though which give you the best reception and battery life. Like for me LP6 work wonders. here is the link (thanks to chasmodo)- http://forum.xda-developers.com/showpost.php?p=24795579&postcount=975
Rest links you can find in my signature.
Hit thanks if it helped you!
abhisahara said:
Let the kernel be what comes with the rom. You can try flashing different modems though which give you the best reception and battery life. Like for me LP6 work wonders. here is the link (thanks to chasmodo)- http://forum.xda-developers.com/showpost.php?p=24795579&postcount=975
Rest links you can find in my signature.
Hit thanks if it helped you!
Click to expand...
Click to collapse
Thank you very much
a little guideline on how to flash the lp6 modem please
tysonraylee said:
Thank you very much
a little guideline on how to flash the lp6 modem please
Click to expand...
Click to collapse
Just download the file and keep it in your SD card internal or external - your choice. Reboot to recovery and then select install zip from sd card. (if its internal card then select - install zip from internal sd card). Then locate the zip and hit yes flash. Done
Next step- Hit thanks button LOL
abhisahara said:
Just download the file and keep it in your SD card internal or external - your choice. Reboot to recovery and then select install zip from sd card. (if its internal card then select - install zip from internal sd card). Then locate the zip and hit yes flash. Done
Next step- Hit thanks button LOL
Click to expand...
Click to collapse
done both steps
stunner looks awesome
thank you very much
A
Sent from my SAMSUNG-SGH-I727 usings XDA
Hi everyone, I'm not a new one here, before I had a lovely Motorola Defy with 4.0.4 CyanogenMod . ( Sorry for my bad English )
Now this change from Motorola to Samsung it's a little bit different .
I'm a little bit worried because before this Note, I had another one and I've hard-bricked it trying to flash RocketRom ( I've made a fullwipe, bad kernel and root with CWM .. Idiot, yes, I know :cyclops: ( stuck at factoryfs .. :cyclops: )
That's the reason why I started this topic because now I want to be sure about everything I do . I DON'T HAVE WARRANTY AND I CAN'T REPLACE IT AGAIN !
So .. what I want ?
1. Root
2. CWM STABLE / Adevanced recovery
3. Kernel Stable ( to be able to full data wipe, factory reset )
4. PARANDROID ROM or ROCKETROM ( Last versions )
5. Maybe a little overclock , maybe . I'm not sure now, deppends how fast will be my Note after another Rom .
Now I should tell you my Note info :
GT-N7000 ( United Kingdom, Carphone Warehouse )
Android Vers 4.0.4 STOCK NOROOT
Baseband Vers N7000XXLRK
Kernel Vers [email protected] #3 SMP PREEMPT Mon Jul 16 20:50:37 KST 2012
Build Number
IMM76D.XXLRK
Someone can explain we every step I need to do before .. I don't want to brick it again !
I've tried to find some info in Dev but too many info and I'm stuck, I really don't know exactly what should I do .
Please help me, thx a lot ! Andrew .
reply
hi
sorry for what happend to your first Note ...
for a safe root/kernel/CWM ,I advise you this kernel
HYDRACORE:
- have the eMMC_erase-safe diseabled ,so it is safe to do wipes
- CWM 6.0.x safe
- root your note will be rooted when you flash this kernel
- work with all rom types (TWstock , AOSP ,AOKP ,CM) so rocketrom and paranoid works on this kernel
- have to versions one O.C at 1600Mhz and a STD version no O.C
- and more features I can't list it ...
you can see all this on the original thread http://forum.xda-developers.com/showthread.php?t=1749863
thanx lord-ralf-adolf
Alright, thank you man , seems to be a good one, but I'm a little bit confused how to do it cuz' I'm coming from STOCK ICS 4.0.4 , no root, no mod, nothing .. I need someone to explain me here ( if someone want ) .. anyway, thank you.
I'm waiting also for another opinion .
EvoEndless said:
Alright, thank you man , seems to be a good one, but I'm a little bit confused how to do it cuz' I'm coming from STOCK ICS 4.0.4 , no root, no mod, nothing .. I need someone to explain me here ( if someone want ) .. anyway, thank you.
I'm waiting also for another opinion .
Click to expand...
Click to collapse
To Root your phone just go here
http://forum.xda-developers.com/showthread.php?t=1329360
after that flash Hydracore kernel from here.
http://forum.xda-developers.com/showthread.php?t=1749863
You will have CWM with safe kernel. Now you can do wipes as much as you want. Nothing to worry. After that flash any rom and start rocking your device.
Alright , thank you so much guys
One more question :
If I want to root , can I use this mod ?
1B.If you want just Root but not kernel, follow this
- Download Root_SuperSu 0.95
-Copy downloaded file to Ext SD card.
-Reboot into recovery (vol up+Home+power)
-Select install zip from ext SD card
-select 'root_SuperSU-*.zip' which you have copied to Ext card above
-Reboot device
-You can see superSU on appl drawer. open it and update.
-Now This will give you only SuperSU not busybox, though application which doesn't depends on system busybox will still works.e.g.Titanium Backup.
-To get full Root+busybox, Download Root_busybox *.zip
-Copy Root_busybox* only to Ext SD card
-Reboot into recovery, Select Install zip from Ext SD card. select Root_busybox* .zip and Flash.
-Done !
And then , flash hydracore , and after that parandroid ? Thx
EvoEndless said:
Alright , thank you so much guys
One more question :
If I want to root , can I use this mod ?
1B.If you want just Root but not kernel, follow this
- Download Root_SuperSu 0.95
-Copy downloaded file to Ext SD card.
-Reboot into recovery (vol up+Home+power)
-Select install zip from ext SD card
-select 'root_SuperSU-*.zip' which you have copied to Ext card above
-Reboot device
-You can see superSU on appl drawer. open it and update.
-Now This will give you only SuperSU not busybox, though application which doesn't depends on system busybox will still works.e.g.Titanium Backup.
-To get full Root+busybox, Download Root_busybox *.zip
-Copy Root_busybox* only to Ext SD card
-Reboot into recovery, Select Install zip from Ext SD card. select Root_busybox* .zip and Flash.
-Done !
And then , flash hydracore , and after that parandroid ? Thx
Click to expand...
Click to collapse
Yes but when you are you rooted your device , you must install Mobile Odin and then Flash HydraCore kernel (to avoid yellow triangle), then you are safe.
My way is little diferent but also safe. If you want, you can folow this steps (no need to root).
You said that you are on xxlrk so i sugest this steps.
First download PhilZ kernel for xxlrk from here (choose right kernel for your xxlrk rom): http://forum.xda-developers.com/showthread.php?t=1901191
Then download a HydraCore kernel from here: http://forum.xda-developers.com/showthread.php?t=1749863
And then download your favorite rom and put it all on your internal sd card.
1. Now go into stock recovery VolUp+home+power. Now you are in stock recovery - Never do wipes in that recovery!!!
2. Flash PhilZ kernel (because you can install this kernel from stock recovery) - select "apply update from external storage", choose PhilZ kernel and wait untill its done. Then reboot your device, wait until its booted up and go again into recovery volup+home+power.
3. Now if you see different recovery (not the black-blue one) you are good. This recovery has a grey background, and that is a CWM6 on a safe kernel. You are safe to do all the wipes but there is no need to do it now, yust folow next steps.
- Note: I sugested these first three steps because you dont need root and dont need use mobile odin or PC odin. Maybe it sounds complicated but it isnt.
4. Now when you are in recovery and seeing diferent new CWM6 from step 3. You can flash HydraCore kernel (install zip from sd card)... and wait for message installing hydracore kernel is complete.
5. Go in advance and reboot recovery. Now there is no difference in recovery but you are now on HydraCore kernel. From that point you are safe to do all wipes and flash any rom you want (PhilZ kernel is only for TW roms, also safe to do all wipes)
6. To be sure that you are on HydraCore kernel you can reboot your device and go into settings > about and check that you are on HydraCore.
7. Go into recovery again , do all three wipes(cache, data and dalvik cache) and you are ready to flash your new rom. Just to make sure, read installig instruction in OP of rom you want to flash!
From now on, when you want to flash a new rom, always check on which kernel you are. My advice is when you want to flash for example Paranoid from RocketRom yust make sure you are on HydraCore kernel (if you are not, first flash Hydracore) and then flash your new rom. HydraCore kernels made flashing easier because it is one kernel for all roms.
Dont forget hit thanks button to all devs that make your flashing experience easier
Hope that helps!
If you want, you can wait untill someone confirm that my steps is right. Or someone has better suggestion. Untill that, search forum, and read, there is a lot of similar question.
But dont worry, i flashed it that way, from stock TW 4.0.4. and never had a problem :good:
Thank you man, so much . I'm done . I've installed hydracore ( checked in about phone ) .
But now I want to ask something :
- For RocketRom v11 ( http://forum.xda-developers.com/showthread.php?t=1654838 )
following this steps :
a) coming from a rooted GB-ROM:
- download Abyss Kernel 4.2 from here: http://www.mediafire.com/?c65mndvpk6ocbaa
- put zip-file on your USB-storage
- boot in Recovery
- Flash Abyss Kernel 4.2!!!
- boot back in recovery!!! (you find this option under 'advanced')
- FullWipe
- Flash ROM
- reboot system
- ...you are done
I really need to Flash Abyss Kernel 4.2 ? Because now I've Hydracore v5.4.
- For Parandroid , which one :
(1) http://forum.xda-developers.com/showthread.php?t=1797698
(2) http://forum.xda-developers.com/showthread.php?t=1654838
What means that cuz I don't understand very clear " Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! " . I'm safe to continue with hydracore v5.4 ?
Thank you and sorry for stress with me
reply
EvoEndless said:
Alright , thank you so much guys
One more question :
If I want to root , can I use this mod ?
1B.If you want just Root but not kernel, follow this
- Download Root_SuperSu 0.95
-Copy downloaded file to Ext SD card.
-Reboot into recovery (vol up+Home+power)
-Select install zip from ext SD card
-select 'root_SuperSU-*.zip' which you have copied to Ext card above
-Reboot device
-You can see superSU on appl drawer. open it and update.
-Now This will give you only SuperSU not busybox, though application which doesn't depends on system busybox will still works.e.g.Titanium Backup.
-To get full Root+busybox, Download Root_busybox *.zip
-Copy Root_busybox* only to Ext SD card
-Reboot into recovery, Select Install zip from Ext SD card. select Root_busybox* .zip and Flash.
-Done !
And then , flash hydracore , and after that parandroid ? Thx
Click to expand...
Click to collapse
EvoEndless said:
Alright, thank you man , seems to be a good one, but I'm a little bit confused how to do it cuz' I'm coming from STOCK ICS 4.0.4 , no root, no mod, nothing .. I need someone to explain me here ( if someone want ) .. anyway, thank you.
I'm waiting also for another opinion .
Click to expand...
Click to collapse
to root just flash the hydracore kernel via odin pc ,then delete the yelow triangle by using "triangle away - use the search bouton ). it is the safest way
EvoEndless said:
Thank you man, so much . I'm done . I've installed hydracore ( checked in about phone ) .
But now I want to ask something :
- For RocketRom v11 ( http://forum.xda-developers.com/showthread.php?t=1654838 )
following this steps :
a) coming from a rooted GB-ROM:
- download Abyss Kernel 4.2 from here: http://www.mediafire.com/?c65mndvpk6ocbaa
- put zip-file on your USB-storage
- boot in Recovery
- Flash Abyss Kernel 4.2!!!
- boot back in recovery!!! (you find this option under 'advanced')
- FullWipe
- Flash ROM
- reboot system
- ...you are done
I really need to Flash Abyss Kernel 4.2 ? Because now I've Hydracore v5.4.
- For Parandroid , which one :
(1) http://forum.xda-developers.com/showthread.php?t=1797698
(2) http://forum.xda-developers.com/showthread.php?t=1654838
What means that cuz I don't understand very clear " Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! " . I'm safe to continue with hydracore v5.4 ?
Thank you and sorry for stress with me
Click to expand...
Click to collapse
Flashing abyss on advise by rocketrom, is for u to be on safe kernel to do full wipe before flashing the Rom.Can
But.. U r on hydracore, mate.
No need to flash abyss alrd, hydra is safe to full wipe.
Sent from my GT-N7000 at the corner of this rounded earth.
Ok now you are on stock xxlrk with HydraCore.
From that point if you want try RocketRom:
1. Reboot recovery (VolUp+Home+Power)
2. You are now in new shiny CWM6 recovery (with grey background, if not, something is wrong dont do wipes, but i assume everything is ok, just a safety check)
3. Now you are safe to do all three wipes (wipe cache,data and dalvik cache)
4. "Install zip from SD card" choose rocket rom, select install
5. Sit back, relax and enjoy
Now you are on rocketrom. Rocketrom also came with hydracore kernel, so if you want try paranoid you are safe to flash. Just check in about phone, that you are on safe kernel (safety check).
Installing procedure is almost the same. I have never installed paranoid, but installed some others CM10 based roms,so i will just copy/paste installiing instructions from OP.
1. You are on hydracore? yes. Now reboot recovery.
2. Full wipe (cache, data, dalvik cache)
3. Install Rom
4. Install possible bug fixes (look out for "FIX" or "BUGFIX" prefixes and make sure the build number matches your rom)
5. Install GApps
6. Wipe cache / dalvik cache
7. Reboot
8. Enjoy
Thank you guys, almost done ! I'm so happy now !
hi,
I'm in the same situation that EvoEndless, and i think i will try to flash hydracore and a new rom tonight, after searching and reading for about 3 weeks. (confusing ><' )
I think i've understood how i will proceed but i'm not sure about the rom i want to flash.
(this ROM)
I think it's OK but in the rom's thread, it's said :
Based on Latest FW N7000XXLRQ, Phone: DDLR1, CSC: N7000DBTLRQ
Click to expand...
Click to collapse
and i'm on LRK (the phone line when u type *#1234#) and LRT (the CSC and PDA lines when u type *#1234#)
i'm affraid about what could happen, don't want to brick, please help
(sorry for bad english :/)
You gave link of ClasssicRom V6, and it is based on latest indian DDLR9. (you are on xxlrt that is a germany latest version, a ddlr9 is indian latest version of ics 4.0.4)
ClassicRom v5 is based on XXLRQ.
If you want to flash a V6, it is ok, i think that is a very good rom.
Just make sure that you are on safe kernel before flashing, like hydracore. And reading installing instructions in OP.
djoni_gitara said:
You gave link of ClasssicRom V6, and it is based on latest indian DDLR9. (you are on xxlrt that is a germany latest version, a ddlr9 is indian latest version of ics 4.0.4)
ClassicRom v5 is based on XXLRQ.
If you want to flash a V6, it is ok, i think that is a very good rom.
Click to expand...
Click to collapse
Do u mean this ROM is not compatible with my device (it's not clear in my head, very sorry ^^') and it's mandatory to use a V5?
djoni_gitara said:
Just make sure that you are on safe kernel before flashing, like hydracore. And reading installing instructions in OP.
Click to expand...
Click to collapse
Yep, the first step will be to flash the hydracore kernel by folowing this post :
sahilarora2003 said:
To Root your phone just go here
http://forum.xda-developers.com/showthread.php?t=1329360
after that flash Hydracore kernel from here.
http://forum.xda-developers.com/showthread.php?t=1749863
You will have CWM with safe kernel. Now you can do wipes as much as you want. Nothing to worry. After that flash any rom and start rocking your device.
Click to expand...
Click to collapse
And then flash the rom after full wipe
Lokidroïd said:
Do u mean this ROM is not compatible with my device (it's not clear in my head, very sorry ^^') and it's mandatory to use a V5?
Yep, the first step will be to flash the hydracore kernel by folowing this post :
And then flash the rom after full wipe
Click to expand...
Click to collapse
This ROM is compatible with your device. You can flash it :good: (It is hard for me to explain why but it is all ok) They are all for international N7000, no need to worry
Yes you can follow sahilarora2003 post. Also you can follow my posts in this thread, you can flash hydracore kernel in few ways. choose the way you want.
If you want the other easiest way to flash ClassicV6 from stock XXLRT I recomend the following:
1. Download a PhilZ kernel for XXLRT (if you are on stock XXLRT) from: http://forum.xda-developers.com/showthread.php?p=31914226#post31914226
Put it on your internal SD card
2. Now you can flash PhillZ kernel from stock recovery (never do wipe here in stock recovery!).
Going in stock recovery by pressing Volup+home+power, when you boot up in recovery choose "update from sd card", choose PhilZ kernel and install it
4. now choose "Reboot your device"
5. Now go again in recovery (volup+home+power). You will see a different new shiny CWM6 recovery, if you dont see it, something is wrong (dont do wipe)
If you see a new recovery you are safe to do three wipes(cache, data and dalvik cache)
6. Now "install from zip card" choose ClassicV6 , and thats it!
7. Enjoy
I recomend a PhilZ kernel because you dont need to root to flash it, and you can flash it from stock recovery and it is brickbug free
You can flash HydraCore after you flash ClassicRomV6 because this rom came with Speedmod kernel, which is also good and safe for wiping. Because if you flash it before, Classicrom will flash his kernel which is Speedmod k3-13 kernel. So you will be on Speedmod.
I hope that I did not confuse you more
djoni_gitara said:
I hope that I did not confuse you more
Click to expand...
Click to collapse
You couldn't be more clear! :good: (thnks button hit) :laugh:
i'll try this in a few minutes and i'll post feedback
PS : last question, do i have to plug my device to the PC during all flashes? or no need to this?
Lokidroïd said:
PS : last question, do i have to plug my device to the PC during all flashes? or no need to this?
Click to expand...
Click to collapse
NO!!
Just download all neccesary files to your device on internal SD card (kernel and rom). Thats the only reason why you would plug it to the PC. Then unplug it and follow the steps..
P.S. Just make sure that your battery is charged over 70% (in case that something goes wrong)
mhhh
i was about to DL the PhilZ kernel and i don't know which one i should use : lrt or lrk
i said that because when i go into menus, there are LRT and LRK and i don't want to make any mistake
Lokidroïd said:
i'm on LRK (the phone line when u type *#1234#) and LRT (the CSC and PDA lines when u type *#1234#)
Click to expand...
Click to collapse
here is a screenshot to be sure to do no error :silly:
So? LRT or LRK?
Hi mate, in my case, I didn't type any code to find out info. I just go to settings > About Phone > Baseband Version ( In my case was N7000XXLRK UK ) . This is your sure baseband version .
Follow #6 , Flash PhilZ kernel from stock recovery It's easier than the ODIN PC way . Be sure if you flashed done ( " This recovery has a grey background, and that is a CWM6 on a safe kernel. " ) .. After that , flash Hydracore . ( To be sure if you flashed done, check again settings > About Phone > Kernel Version , and if you see hydracore there, You're fully safe now. Can do any wipe )
Just follow the steps from #6 and chose the right version of PhilZ kernel for your phone.
sorry, i was busy today...
I cant see atachments...
Ok, PDA is what you are looking for. You need a kernel for PDA ok?
Phone is modem (baseband version)
csc is country sales code
So i assume that you have (when you type *#1234#)
PDA N7000XXLRT
PHONE N7000XXLRK
CSC N7000XXLRT
If it is correct you need to download XXLRT kernel
here: http://www.mediafire.com/?ucu9fzcfpe8b6je
---------- Post added at 09:07 PM ---------- Previous post was at 09:01 PM ----------
EvoEndless said:
Hi mate, in my case, I didn't type any code to find out info. I just go to settings > About Phone > Baseband Version ( In my case was N7000XXLRK UK ) . This is your sure baseband version .
Click to expand...
Click to collapse
No, no!
Baseband version is modem! (or phone), that is not important rihgt now
If you are look in settings> about phone> Build number (for ex. IMM76D.XXLRT)
Then he need XXLRT kernel!
EDIT: ok i see attachement now (my internet connection is poor, not at home now). It is ok download from link that i gave you XXLRT
Hi all,
I know similar questions have been asked literally hundred times, but as a complete noob to roms, I want to make sure that I get a full set of instructions and then I won't brick my phone. I want to upgrade my note to this JB Rom by cronosmachine. I'm on stock ICS 4.0.4. Never rooted or did modding to the phone. No kernel change (which I know nothing about), nothing.
I'm not sure how much info you guys will need but here are the basics:
Baseband version: N7000XXLRB
Kernel version: 3.0. 15-1115729
[email protected] #3
SMP PREEMPT Thu Sep 20 00:40:29 KST 2012
Build number: IMM76D.ZSLPN
I know that I have to first root my phone to get CWM? My guess is to follow method 1 on [24sept12]How to Root/Unroot Samsung Galaxy Note + CWM?
And then from there I don't know what to do in order to get the ROM onto my phone.
And is there anything else I need to be aware of?
Appreciate any kind of help.
yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough
nokiamodeln91 said:
yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough
Click to expand...
Click to collapse
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?
rcheung28 said:
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?
Click to expand...
Click to collapse
Yes, bas band refers to the modem, Build Number is rom.
Sent from my GT-N7000 using xda premium
Thanks SpyderTracks.
One more question before I pull the trigger, can all this be done with the "internal" SD card? Or does it have to be an external SD?
stock recovery doesnot allow installation from internal SD. so external is required. but you can use PC odin to install it, but it will leave a yellow triangle and increase the counter. later you can use triangle away app to reset it, Final call is yours.,
So after I installed philz's root and safe kernel, I went into recovery to wipe data cache system, went also wiped dalvik. Then I went to the main menu, chose install zip, tried to select choose zip from sdcard, but it keeps giving me this error: E:Can't mount /sdcard/
Nevermind, I managed to install from internal SD. But I'm not liking the ROM that much, so I plan on flashing CM10 Nightly to try it out.
On the CM10 thread, it says that I shouldn't be on a ROM based on stock. What I want to do is to flash CM9. But in order to do that, I'm not sure if I'm already on a safe kernel (after rooting using dr.ketan's 1a method (Phil's)).
what rom are you on now?
nokiamodeln91 said:
what rom are you on now?
Click to expand...
Click to collapse
I'm on this rom, it's a tw based rom based on the leaked jb ls7?
I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7
nokiamodeln91 said:
I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7
Click to expand...
Click to collapse
I'm not sure either, I booted into recovery, went into Philz Settings > about, and got CWM base 6.0.1.5, and PhilZ Touch 3.00 (n7000).
And what you're saying is that if I'm on Philz xxls7 kernel, I can go right to flashing CM10, without worrying the "do not flash on stock based ICS fw" (even though I'm on jb)?
Yes.. you are on philz kernel and you can directly install CM10
nokiamodeln91 said:
Yes.. you are on philz kernel and you can directly install CM10
Click to expand...
Click to collapse
Thanks for the information. But I want to know what makes my case an exception from
- Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! - You're warned!
Click to expand...
Click to collapse
.
I'm on a JB rom but it's based on stock, isn't that essentially the same as based on stock ICS?
the warning was when the safe ics kernels were not in effect.
nokiamodeln91 said:
the warning was when the safe ics kernels were not in effect.
Click to expand...
Click to collapse
Thanks for the quick reply!! When I get home, I'll try this out!
So what I need to do is
put the zip files onto my SD,
reboot into recovery,
install the rom,
install google apps,
wipe data,
factory reset,
reboot into cm10
I don't need to wipe system/cache/dalvik??
once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps
nokiamodeln91 said:
once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps
Click to expand...
Click to collapse
Thanks a lot for guiding me through this, everything worked out perfectly!
great. now enjoy the cm10..:thumbup::thumbup::thumbup:
How come even after I performed format system cache data dalvik, some of the settings are still left on the phone? e.g. previously saved wireless networks, wallpapers... How can I completely start from scratch?