someone please help i tried to flash the jelly bean ftf on my v with flashtool but it crashed halfway and it cant boot beyond the exclamation mark thing. It would just shutdown. Someone please help?
Try to do factory reset in recovery or flashtool.
peetr_ said:
Try to do factory reset in recovery or flashtool.
Click to expand...
Click to collapse
Ive tried. also tried flashing kernels, flashing stock roms from recovery but all get to the same screen
Reflash the JB ftf, install CWM for JB and do factory reset there.
peetr_ said:
Reflash the JB ftf, install CWM for JB and do factory reset there.
Click to expand...
Click to collapse
ive tried, but the phone goes into a bootloop ending at the exclamation mark screen everytime i plug it to the computer in flash mode. only time it works is in fastboot mode where i tried to flash different kernels to no avail.
Try formating system in CWM and install some rom in zip. Is it possible to mount system, data, cache, etc. in recovery?
odazy said:
ive tried, but the phone goes into a bootloop ending at the exclamation mark screen everytime i plug it to the computer in flash mode. only time it works is in fastboot mode where i tried to flash different kernels to no avail.
Click to expand...
Click to collapse
Flash a recovery, backup your internal and external sdcards, format them, flash Rom, boot your phone at least one completely, restore your sdcards and done
Sent from my phone using XDA Premium
crazymister said:
Flash a recovery, backup your internal and external sdcards, format them, flash Rom, boot your phone at least one completely, restore your sdcards and done
Sent from my phone using XDA Premium
Click to expand...
Click to collapse
thanks everyone for responding. I've managed to flash cm10.1 on my phone and boot it after wiping everything. However after that when i try to go back to stock/stock based roms i boot into that screen again. Any ideas why? Luckily cm10.1 is stable enough for daily use.
You just need to let it do it it's thing, when I flashed jb, I had to leave it over night on the triangle...
Sent from my LT30p xda premium app.
How do I customise the signature on xda premium app?
gregbradley said:
You just need to let it do it it's thing, when I flashed jb, I had to leave it over night on the triangle...
Sent from my LT30p xda premium app.
How do I customise the signature on xda premium app?
Click to expand...
Click to collapse
the problem is that it doesnt stay on that screen, but just shuts down till the next boot.
Related
Hi. Would be great if anyone could help as I bricked[?] my phone earlier today.
So here's what happened.
I was on SweetRomV1 JB previously and wanted to flash back to ICS RRv12.
So I stupidly flashed Abyss Kernel from my recovery forgetting that it doesn't support JB rom.
So the CWM started refreshing itself, stopping me from surfing the menu up and down.
I pulled out the battery, place it back in. The phone started up, but the screen was empty/blank/black.
Searched on the net then I realized Abyss Kernel doesn't support JB.
So under some forumer advice, I flashed a Stock ICS Rom using PC odin.
This time, I can access recovery with no problem. However I'm still stuck, the phone is not rebooting.
I'm stuck at the Samsung logo.
So I decided to flash a new kernel using PC odin and a new rom.
I flashed SpeedMod K3-15 using Pc odin and in recovery, I flashed the RRv12 rom.
Now it's still loading the boot animation.
I'm really at a loss now. Can anyone help?
I can access download mode and recovery. But I can't place files into my ext_sd because I can't boot up my phone.
Can anyone help me to get my phone working again?
Thanks in advance.
Flash stock gb via pc odin and work from there. The problem is you flashed incompatible kernels. The flash back to original should be fine.
Sent from my GT-N7000 using xda premium
are you on rr now? what do you see in recovery? is it cwm philz? if yes do a factory reset, wipe data, wipe dalvik and reboot
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
are you on rr now? what do you see in recovery? is it cwm philz? if yes do a factory reset, wipe data, wipe dalvik and reboot
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Nope. CWM-base recovery.
if you are on a safe kernel ek do a factory reset
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
if you are on a safe kernel ek do a factory reset
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I did it last night. I'm able to boot up now and I'm in RRv12 now. However, what just happened was, I changed to a fresh battery to charge it.
When I boot up, it shows that battery is disconnected. So I did a power off, and pulled out the battery. Used the method online, dropped the battery from around 2 feet high.
When I place the battery in again, I'm stuck AGAIN at the boot animation.
Any help?
Hi all
N7000 @ 4.1.2 with PhilZ.Speedmod
Odd behaviour began a few days ago: Single tap power button would cause the Reboot/Airplane mode menu followed by a crash a few seconds later. This became more and more likely to happen so I wiped user data and performed a full factory reset/cache wipe etc.
Went through the android start up as per usual and only installed non-root apps just to be on the safe side (except Titanium Backup - which i use to freeze Touchwiz).
About 4 hours after, same problem only this time it wont get past Samsung Galaxy Note GT-N7000 Splash screen image at all.
A new battery was inserted a few days ago - could this have damaged the board maybe?
Recovery STILL works but I don't have any backup images.
Odin recognizes the phone in download mode
Should I try a different kernel/rom?
Really lost without my note.
Any help gratefully receieved!
Regards
Warnoceros
I am having the same issue. Was on Carbon Rom and everything was working fine, then after a restart the phone cannot pass the boot animation. It just shuts off right in the middle of booting. Have tried to reflash back to GB and still the same issue.
Flash a new fresh 4.1.2 rom thorugh pc odin after doing all necessary wipes
Sent from my GT-N7000 using Tapatalk 2
try use another battery...
RickR78 said:
I am having the same issue. Was on Carbon Rom and everything was working fine, then after a restart the phone cannot pass the boot animation. It just shuts off right in the middle of booting. Have tried to reflash back to GB and still the same issue.
Click to expand...
Click to collapse
That was weird never happened before with me as i have been using carbon rom almost 3months now.. And when you falshed back to a gb rom have performed a factory reset in recovery? If not then do it first
Sent from my GT-N7000 using Tapatalk 2
zai89 said:
try use another battery...
Click to expand...
Click to collapse
Thanks - tried a different Battery - same problem
abhinav quietly brilliant said:
Flash a new fresh 4.1.2 rom thorugh pc odin after doing all necessary wipes
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Abinav
Will try in the morning. Do I need a new Kernel first?
Warnoceros
No let it be the stock after first flash
Sent from my GT-N7000 using Tapatalk 2
abhinav quietly brilliant said:
No let it be the stock after first flash
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Okay, so reflashed and the phone booted fine but i'm still getting this intermittent 'power button causing crash' fault. Tried a couple of different Roms and am still getting the same problem.
Could it be a hardware problem?
Thanks
Warnoceros
Yeah it seems to be a hardware issue.. Wait for someone else more experienced then me to see this thread maybe he/she can suugest you a way to get out of this problem.. If you have warranty then do claim it before it's too late
Sent from my GT-N7000 using Tapatalk 2
the battery might be failing and have caused something that messed up the filesystem; try installing another battery and reflash any rom with wipes etc and see if it boots up
What kernel do you use exactly?..philz or speedmod?...
If you on philz or speedmod kernel I suggest you make a clean install,
Reboot recovery full wipe..
Reboot to download mode,
Flash stock GB or JB..
If you flash JB, download philz kernel.zip and flash through stock recovery...
Sent from my GT-N7000 using Tapatalk HD
Stuck on Splash Screen. No recovery. Odin not able to flash roms.
zai89 said:
What kernel do you use exactly?..philz or speedmod?...
If you on philz or speedmod kernel I suggest you make a clean install,
Reboot recovery full wipe..
Reboot to download mode,
Flash stock GB or JB..
If you flash JB, download philz kernel.zip and flash through stock recovery...
Sent from my GT-N7000 using Tapatalk HD
Click to expand...
Click to collapse
Hi
My stock JB official unrooted rom suddenly went to a bootloop. I looked up online for solutions and flashed an official JB ROM for my phone and Odin failed to flash it. I tried Philz recovery but Odin failed to flash it. I got a yellow triangle which I was able to removie through Odin. Currently my phone is stuck on the splash screen. Recovery doesn't work. Odin fails when I try to reflash with a md5.tar file. Please experts help me with my problem. would really appreciate it.
Thanks in advance.
fahad.anwar.xda said:
Hi
My stock JB official unrooted rom suddenly went to a bootloop. I looked up online for solutions and flashed an official JB ROM for my phone and Odin failed to flash it. I tried Philz recovery but Odin failed to flash it. I got a yellow triangle which I was able to removie through Odin. Currently my phone is stuck on the splash screen. Recovery doesn't work. Odin fails when I try to reflash with a md5.tar file. Please experts help me with my problem. would really appreciate it.
Thanks in advance.
Click to expand...
Click to collapse
you usually get stuck in a boot loop when you forget to wipe dalvik cache and factory reset the phone before installing a custom rom
Be patient...
makyubex said:
you usually get stuck in a boot loop when you forget to wipe dalvik cache and factory reset the phone before installing a custom rom
Click to expand...
Click to collapse
Just Got philz kernal for your device ..(i know you have done it but just do it again)...
go to samfirmware and download your firmware...and flash through odin...
Dr.Ketan thread is always available for u...
---------- Post added at 05:25 AM ---------- Previous post was at 05:19 AM ----------
makyubex said:
you usually get stuck in a boot loop when you forget to wipe dalvik cache and factory reset the phone before installing a custom rom
Click to expand...
Click to collapse
If you want the indian ROM and recovery and unable to install from the Hotfile just download these links serial wise...
1. https://drive.google.com/file/d/0B9lXWJxj84B6Z2pkQ3RhV0lIbEU/edit?usp=sharing
2. https://drive.google.com/file/d/0B9lXWJxj84B6dGVpWDZXemNZckU/edit?usp=sharing
3. https://drive.google.com/file/d/0B9lXWJxj84B6dzRZYWU3aVV0MDg/edit?usp=sharing
Try the following please, you must have Android SDK installed beforehand:
http://forum.xda-developers.com/showthread.php?t=2165870
Instead of using the "-n" argument, I used "-y" and "-f" to force checking the partitions and to automatically answer yes to all questions.
I've tried in twrp and cwm/cwm touch - I get a boot loop no matter which rom I flash
I made a backup of my stock 404 on cwm and twerp so It's easily reversible in either.
Similar to this post - http://forum.xda-developers.com/showthread.php?p=45795997#post45795997
It involves flashing Pi-llama 1.4 via adb and then installing the custom rom over the top.
Ran into all sorts of issues, would hang on the third data write, so I cancel it and then it would continue etc... and install
Now I'm up and running I've got half PiLlama and this rom I put on, battery drain is bad and the clock process crashes when I try and set an alarm. Otherwise it's great.
Any ideas? Seems to be the data partition causing the problems.
I'm rooted and unlocked, thought I'd add.
Flacid Monkey said:
I've tried in twrp and cwm/cwm touch - I get a boot loop no matter which rom I flash
I made a backup of my stock 404 on cwm and twerp so It's easily reversible in either.
Similar to this post - http://forum.xda-developers.com/showthread.php?p=45795997#post45795997
It involves flashing Pi-llama 1.4 via adb and then installing the custom rom over the top.
Ran into all sorts of issues, would hang on the third data write, so I cancel it and then it would continue etc... and install
Now I'm up and running I've got half PiLlama and this rom I put on, battery drain is bad and the clock process crashes when I try and set an alarm. Otherwise it's great.
Any ideas? Seems to be the data partition causing the problems.
Click to expand...
Click to collapse
Damn! Please can someone move this to http://forum.xda-developers.com/razr-i/help Posted it in here by accident
I you want to flash a custom rom just don't wipe data and don't do a format /wipe data
The problem with that is it has previous rom stuff still installed.
I like a clean fresh install of a rom, so no contacts, messages, apps etc...
There is no way to do this without a bootloop.
Flacid Monkey said:
The problem with that is it has previous rom stuff still installed.
I like a clean fresh install of a rom, so no contacts, messages, apps etc...
There is no way to do this without a bootloop.
Click to expand...
Click to collapse
flash a stock rom via rsd-lite..this will wipe the data too..then flash a custom rom
antkalaitzakis96 said:
flash a stock rom via rsd-lite..this will wipe the data too..then flash a custom rom
Click to expand...
Click to collapse
Boot loop.
Get to the rom boot animation and it does the updating apps then boot loops back to the moto screen and rom animation then repeats until i power off and restore a backup.
Thank you both for suggestions so far. Getting closer to solving
Sent from my XT890 using XDA Premium 4 mobile app
Flacid Monkey said:
Boot loop.
Get to the rom boot animation and it does the updating apps then boot loops back to the moto screen and rom animation then repeats until i power off and restore a backup.
Thank you both for suggestions so far. Getting closer to solving
Sent from my XT890 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
u using cwm?
before flash a rom -> wipe data /system / cache! / dalvik chache -> then flash!
if this dont help do above + wipe battery stats then flash the rom.
have fun.
regards
pangyaaaaaa said:
u using cwm?
before flash a rom -> wipe data /system / cache! / dalvik chache -> then flash!
if this dont help do above + wipe battery stats then flash the rom.
have fun.
regards
Click to expand...
Click to collapse
Yes, I'm using cwm. Tried touch and twrp.
Tried the above, same bootloop.
Only works if i leave my stock 404, push pillama 1.4 via adb and then flash the custom ROM over that in cwm.
This leaves residue from 404 and pillama on my phone though.
Sent from my XT890 using XDA Premium 4 mobile app
Flacid Monkey said:
Yes, I'm using cwm. Tried touch and twrp.
Tried the above, same bootloop.
Only works if i leave my stock 404, push pillama 1.4 via adb and then flash the custom ROM over that in cwm.
This leaves residue from 404 and pillama on my phone though.
Sent from my XT890 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Does stock 404 mean, you are still on ICS?
If so why don't you flash JB with RSD-Lite and try again installing a custom rom?
Can u make a logcat about it?
ICuaI said:
Does stock 404 mean, you are still on ICS?
If so why don't you flash JB with RSD-Lite and try again installing a custom rom?
Click to expand...
Click to collapse
Trying this now
Hazou said:
Can u make a logcat about it?
Click to expand...
Click to collapse
Will try the above then if it doesn't work I'll log it :good:
So I tried RSD lite with Android 4.1.2 Blur_Version.91.2.26001.XT890.Retail.en.EU
No dice. Failed at 7/16 System_Signed
This royally put me in a bad place. 45 minutes of ADB later, I'm back on my CWM backup of 404.
Gonna clean the logs and start from scratch
Flacid Monkey said:
So I tried RSD lite with Android 4.1.2 Blur_Version.91.2.26001.XT890.Retail.en.EU
No dice. Failed at 7/16 System_Signed
This royally put me in a bad place. 45 minutes of ADB later, I'm back on my CWM backup of 404.
Gonna clean the logs and start from scratch
Click to expand...
Click to collapse
I have the same problem and I am on Stock 4.1.2. I have given up and no longer have a rooted phone with a custom ROM. I would, however, be grateful if someone could find a solution
If you are on 404 and trying to get to 4.1.2 you can root your phone then use the following method to unroot and install 4.1.2. You can then root again if you wish.
http://forum.xda-developers.com/showthread.php?t=2398347
grampsharry said:
I have the same problem and I am on Stock 4.1.2. I have given up and no longer have a rooted phone with a custom ROM. I would, however, be grateful if someone could find a solution
If you are on 404 and trying to get to 4.1.2 you can root your phone then use the following method to unroot and install 4.1.2. You can then root again if you wish.
http://forum.xda-developers.com/showthread.php?t=2398347
Click to expand...
Click to collapse
Thank you will give that a go.
I've got a problem now after trying the official 4.1.2 upgrade which failed miserably, the boot image has changed to the warning unlocked phone bla bla bla
My SMS centre number keeps disappearing stopping texts sending. Receiving and calling work fine. Tried the fixes online but all work for two minutes then it disappears again.
Can't factory reset, just boots back up with everything as it was when it turned off. Can't get into the stock recovery so stuck with CWM or twrp
Any time I flash a rom it boot loops.
Ideas on how I can get a clean official 4.1.2 onto the phone? Re-lock bootloader, remove root and then try?
So locking bootloader and removing root does not work.
I'd advise anyone that doesn't know what they're doing to avoid it.
It pretty much soft bricked my phone.
I've started a new thread in q&a with another issue regarding multi flash in fastboot hanging on the third or fourth download.
Im certain parts of the 4.1 are still there even after formatting everything in cwm and restoring my original backup.
Having network issues, 3g and wifi etc are fine. Sms, calls and anything to do with changing network operator just stops a few minutes after boot. I can still receive fine which is odd.
What's the deal with putting a radio on over an official ROM? Yey or ney
Sent from my XT890 using XDA Premium 4 mobile app
Hi
Ancient history - I rooted my Galaxy Note a few weeks ago with a Philz kernel. I didn't really know what I was doing, but it seemed to work fine. This morning, my phone was shut down, and wouldn't start up, sticking on the Samsung screen. I read other threads here, and it seems like to fix this, I need to flash the same Philz kernel using Odin when in download mode, then start up in recovery mode, mount as USB and extract my files, then restart and reinstall files, and I should be back to more or less where I was last night. /Ancient history
I've installed Odin, started the device in download mode, found the correct .tar, connected the phone, and started the process in Odin.
When it got to restart, the phone is again flicking the logo screen on and off, now with a yellow triangle and an exclamation. Does this essentially mean I need a different kernel? I was hoping that reflashing it with the same Philz kernel would solve the problem, but it appears not .
I solved this bit
I also solved this bit. Please see the edited original post for the current problems.
SamWise72 said:
I also solved this bit. Please see the edited original post for the current problems.
Click to expand...
Click to collapse
if you already have flashed philz kernel, try to boot into recovery mode with volume up+power+home button. Yellow exclamation is nothing to worry about, it can be removed once you have phone booted up.
treacherous_hawk said:
if you already have flashed philz kernel, try to boot into recovery mode with volume up+power+home button. Yellow exclamation is nothing to worry about, it can be removed once you have phone booted up.
Click to expand...
Click to collapse
Yeah, I found that I can get into recovery mode, I mounted and backed up my USB, and then I did a factory reset. The phone now runs, and I'm finding myself tempted to put in a KitKat rom, because I'm a glutton for punishment.
SamWise72 said:
Yeah, I found that I can get into recovery mode, I mounted and backed up my USB, and then I did a factory reset. The phone now runs, and I'm finding myself tempted to put in a KitKat rom, because I'm a glutton for punishment.
Click to expand...
Click to collapse
The Step to install kilkat are:
Install The correct philz kernel version.
Install the raw kernel and reboot the recovery.
Full wipe.
Install the 4.4 Rom
Install the gapps.
Wipe cache and dalvik
Roboot.
Sent from my GT-N7000 using Tapatalk
Need help mates. Can't seem to get my stock ROM nandroid backup restored and working. Keeps hanging immediately after boot up and reboots and hangs.
What should I do? Thanks in advance.
Sent from my GT-N7000 using xda app-developers app
Chibuoj said:
Need help mates. Can't seem to get my stock ROM nandroid backup restored and working. Keeps hanging immediately after boot up and reboots and hangs.
What should I do? Thanks in advance.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
You should start a new thread and describe your rom what you did, root or not, what kernel...in more details so that people can help. The issue in this thread is different from yours.
Sent from my GT-N7000 using Tapatalk 2
Chibuoj said:
Need help mates. Can't seem to get my stock ROM nandroid backup restored and working. Keeps hanging immediately after boot up and reboots and hangs.
What should I do? Thanks in advance.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
if you made nandroid backup from philz kernel then flash philz kernel, reboot recovery and try to restore. If you didnt include preload in the backup then that could be a problem. You can do a clean flash for the stock rom and then advanced restore and restore data.
treacherous_hawk said:
if you made nandroid backup from philz kernel then flash philz kernel, reboot recovery and try to restore. If you didnt include preload in the backup then that could be a problem. You can do a clean flash for the stock rom and then advanced restore and restore data.
Click to expand...
Click to collapse
Thanks. But didn't work.
Guess I'll have to try flash via Odin PC. Any helpful thoughts, or directions?
Chibuoj said:
Thanks. But didn't work.
Guess I'll have to try flash via Odin PC. Any helpful thoughts, or directions?
Click to expand...
Click to collapse
If you tried what i mentioned and that didn't work then you can clean install stock rom and you can extract the backup on pc by using 7zip or compression tool and the reatore tbat using titanium backup pro. I haven't tried this ever but this ia what i was suggested by @nokiamodeln91
Sent from my GT-N7000 using Tapatalk
Hey guys. Been around for a while and have never encounted this problem. I went to restore back to stock firmware after running a custom rom.. both 4.3... I added the firmware to odin. It failed before it started and rebooted th phone. Figured out that the firmware I downloaded must of been corrupt/incompletly downloaded.. stuck on samsung boot logo.. tried to restore a fresh complete rom but still stuck on boot logo.. is there something I can do to fix it other than sen it in.
Sent from my GT-S5830 using xda app-developers app
You don't mention recovery .
Usual would be to format sdcard system data cache boot to download mode and flash stock rom .
Yeah i have done all that
Sent from my GT-S5830 using xda app-developers app
After install, try pulling the battery during boot then boot into stock recovery and do a factory reset/data wipe.
Has worked for some
fridgie said:
After install, try pulling the battery during boot then boot into stock recovery and do a factory reset/data wipe.
Has worked for some
Click to expand...
Click to collapse
Tried. Didnt work.. seems like the I have corrupted something in the phone.. tried everything in this forum. But wont come out of boot loop..
Sent from my GT-I9305 using xda app-developers app
winxuser said:
Tried. Didnt work.. seems like the I have corrupted something in the phone.. tried everything in this forum. But wont come out of boot loop..
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Have you tried to change the sdcard?
viktorak said:
Have you tried to change the sdcard?
Click to expand...
Click to collapse
the sdcard is not the problem,, i have corrupted the partitions i think,, altho flashing firmware with odin works fine, it just doesnt boot
really wish I could afford to get this phone fixed I miss this phone and have gone back to an old crappy galaxy ace