lockscreen not working?
Hello, And thanks for your work but there seems to be an awkward behavior on my set up...
After flashing it, lock screen is not working...
Does anyone else have this problem?
How to solve it?
Thanks
it didn't happen to me.
try to wipe ur data-cache partition-dalvik cache-battery stats then reinstall the rom.
issam2424 said:
lockscreen not working?
Hello, And thanks for your work but there seems to be an awkward behavior on my set up...
After flashing it, lock screen is not working...
Does anyone else have this problem?
How to solve it?
Thanks
Click to expand...
Click to collapse
That didn't happen to me eighter try to do a factory resest,wipe cache,a system format then a dalvik cache whipe; after installing the rom again make a factory reset,wipe cache & reboot system :fingers-crossed: worked like a charm for me
I guess you flashed gapps.
Sent from my GT-S5570 using xda premium
ast00 said:
I guess you flashed gapps.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
+1
Yes, u may have flashed a wrong gapps, but its not needed in this rom. Its already included!
Sent from my GT-S5570 using xda premium
mybe you must try to wipe ur data-cache partition-dalvik cache-battery stats then reinstall the rom.
maybe you should read the forum rules first!!! This is the general section. For these queries, why dont u see the q & a forum???
Related
iam using semaphore kernel and stock gb. and i can't wipe the dalvik. anyone has this problem? or is it just me? if anybody have a solution.. thanks
Bump,no one ?
Sent from my GT-I9000 using XDA App
roundbelly said:
Bump,no one ?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
im having this problem too... have u found any solutions... im using onecosmic rc1
Well actually.. No i haven't found any solutions..
Sent from my GT-I9000 using XDA App
can you post the screenshot of the error that you get when you try to wipe dalvik cache? I read the error in your topic but a screenshot will be more helpful..
I always get that error, I just ignore it. I like to think it wipes anyway .
ishangoyal said:
can you post the screenshot of the error that you get when you try to wipe dalvik cache? I read the error in your topic but a screenshot will be more helpful..
Click to expand...
Click to collapse
I don't think i can take screenshot in cwm... Or can i? Except for using a camera of course
Sent from my GT-I9000 using xda premium
roundbelly said:
I don't think i can take screenshot in cwm... Or can i? Except for using a camera of course
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
ya using cam or some other phone
actually when I wipe the dalvik cache I do get the same error but in the next line it says that dalvik cache wiped .. is it happening with you too?
ishangoyal said:
ya using cam or some other phone
actually when I wipe the dalvik cache I do get the same error but in the next line it says that dalvik cache wiped .. is it happening with you too?
Click to expand...
Click to collapse
Exactly like that.. But i'm not sure is the dalvik really is wiped? Or the phone think it's wiped?
Sent from my GT-I9000 using xda premium
roundbelly said:
Exactly like that.. But i'm not sure is the dalvik really is wiped? Or the phone think it's wiped?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I think it gets wiped .. because if you boot your phone after that it takes quite some time.. like the first boot.. if the dalvik cache was not wiped the phone will boot up faster like normal ..
ishangoyal said:
I think it gets wiped .. because if you boot your phone after that it takes quite some time.. like the first boot.. if the dalvik cache was not wiped the phone will boot up faster like normal ..
Click to expand...
Click to collapse
Oh yeah... Thanks i didn't notice the boot time
Sent from my GT-I9000 using xda premium
I think you had your data or cache portion wiped of formatted, so the recovery won't find the dalvik path.
yesterday i've flased aokp rom it flashes normally but when i start it don't start only stuck at boot animation for 20 to 30mins then i removed that rom and flash cm10 the problem was same so i'm back to GB 2.3.6 again do u have any soln for bootstuck ?? pls help
I think that is the problem with rom manager
Sent from my LG-P500 using xda premium
acerkumar said:
I think that is the problem with rom manager
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
What should i do now ??
did you wiped data and cache before and after flashing
dheeraj (dhlalit11) said:
did you wiped data and cache before and after flashing
Click to expand...
Click to collapse
Yeah...he is right.
Sent from my Galaxy Nexus using xda app-developers app
dheeraj (dhlalit11) said:
did you wiped data and cache before and after flashing
Click to expand...
Click to collapse
Didn't do after flashing wait will try thanks
dheeraj (dhlalit11) said:
did you wiped data and cache before and after flashing
Click to expand...
Click to collapse
Thanks it worked thanks a lot but can i increase it graphic and system performance it's working slow and graphics are not too good :/
Zafar7777 said:
Thanks it worked thanks a lot but can i increase it graphic and system performance it's working slow and graphics are not too good :/
Click to expand...
Click to collapse
A new ROM can't improve you hardware...
ast00 said:
A new ROM can't improve you hardware...
Click to expand...
Click to collapse
Awk thanks for the reply bud btw i'm running cm10 now and it restart itself sometimes what's the problem pls ans this
Have you overclocked your device..?? If yes then you don't need to worry it happens and also every custom has some bugs so you really don't need to worry about that..
Sent from my GT-S5570 using xda premium
HI... i'am new in here.
Last day, i found a problem. That is S2E app its not working in CM10.1. (JB 4.2.1)
Then, i browse around google and XDA. ( LOL )
And after that, i combine several apps & scripts that i founds.
Finally, now i can make S2E work in CM10.1
You have same problem ?
Download it here :
DOWNLOAD LINK
DOWNLOAD LINK 2
Flash it via CWM
Tested on :
- XPERIA JB Build#2 ROM based CM10.1
- Touchwiz 5 ROM (V1, V2, & V5) based CM10.1
- CM10.1-20130108-UNOFICIAL-tass
- cm-10.1-20130215-NIGHTLY-tass (Android 4.2.2)
- CM 10.1 RC5
- Almost all CM10.1 built by rohan007
NOTE :
- Don't update the S2E app.
- If when you open it, then it say not granted superuser permission, open the superuser app first.
- If superuser permission still not granted/your sd-ext not detected, turn off your phone for a while. (Reboot is useless)
- If your sd-ext still not detected again you need to reformat your sd-ext partition.
- **Also work on CM9 & CM10**
Credits :
- Ahmad Safar for script
- konstantin12 for app
- Wah-idOne for combine
If this useful, please press thanks
..........it's nice to share...
thank's sir, it's usefull
Sent from my GT-S5570 using xda premium
thanks
already flashed it
but s2e doesn't show any ext
would you please show me how you install it?
pandaplue said:
already flashed it
but s2e doesn't show any ext
would you please show me how you install it?
Click to expand...
Click to collapse
Please try to format sd-ext via cwm first.
Sent from my GT-S5570 using xda premium
Wah-idOne said:
Please try to format sd-ext via cwm first.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
i have, but it didn't work
did i miss something?
pandaplue said:
i have, but it didn't work
did i miss something?
Click to expand...
Click to collapse
Mm.. One of my friend got same issue with you. Then, he tell he re-partition the sd-ext via cwm, and succes.
Sent from my GT-S5570 using xda premium
Wah-idOne said:
Mm.. One of my friend got same issue with you. Then, he tell he re-partition the sd-ext via cwm, and succes.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
i'll try it
it's on low battery now
:highfive:
i am using this s2e but i use michie's jb swap to mount sd-ext.
Sent from my GT-S5570 using xda premium
iel0000 said:
i am using this s2e but i use michie's jb swap to mount sd-ext.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
What do you mean? jb-swap is to active swap partition, jb-a2sd by michie that is made for sd-ext. And, yes, it doesn't work on cm10.1 so we have this topic
---------- Post added at 01:02 PM ---------- Previous post was at 01:00 PM ----------
Wah-idOne said:
Mm.. One of my friend got same issue with you. Then, he tell he re-partition the sd-ext via cwm, and succes.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Re-boot your phone, it works for me, no need to format sdcard.
chinhlevn said:
Re-boot your phone, it works for me, no need to format sdcard.
Click to expand...
Click to collapse
Yeah bro, just reboot work for many people and us. but not for my friend.
Sent from my GT-S5570 using xda premium
I dont have any idea about s2e.. so.. will someone explain me what does it do..? and how can i use it..? do i need to partition my sdcard..? does this extends internal memory..?
i've tried reflashed my rom yesterday and install your script but nothing happened, there was no s2e
would you please explain how you did it on your phone? i really didn't get it why i couldn't install it on my phone
might i miss something i don't know
thanks
Great! finally this S2E works on my phone!! before it doesn't detected my sd-ext so I try to format my sdcard and try repartition, voila all problem solved thx :good: :good: :good: :good: :good:
pandaplue said:
i've tried reflashed my rom yesterday and install your script but nothing happened, there was no s2e
would you please explain how you did it on your phone? i really didn't get it why i couldn't install it on my phone
might i miss something i don't know
thanks
Click to expand...
Click to collapse
hmm.. just flash it in your CM rom via cwm.
make sure no other script has been installed before, if there was remove it first, and don't forget to pray before start.
btw, what rom do you used ?
oj_buddy said:
I dont have any idea about s2e.. so.. will someone explain me what does it do..? and how can i use it..? do i need to partition my sdcard..? does this extends internal memory..?
Click to expand...
Click to collapse
s2e move your app,app data, and dalvik cache to sd-ext partition.
s2e will free up your internal memory, but not extends it. (But, App Data not recommended to move by me)
you can use it in to your CM9/10/10.1 ROM by flashed it via CWM, (Fresh ROM recommended)
I'm sorry for my bad english if you are not understand with my explanation.
pandaplue said:
i've tried reflashed my rom yesterday and install your script but nothing happened, there was no s2e
would you please explain how you did it on your phone? i really didn't get it why i couldn't install it on my phone
might i miss something i don't know
thanks
Click to expand...
Click to collapse
if you installed gapps right after rom instal, you will not get anything new in system with any flashable zip, cause system memory is full...try just with roms gapps to instal., then reboot
Wah-idOne said:
hmm.. just flash it in your CM rom via cwm.
make sure no other script has been installed before, if there was remove it first, and don't forget to pray before start.
btw, what rom do you used ?
Click to expand...
Click to collapse
i'm trying
i think you should pray for me, buddy :laugh:
i'm using this rom http://forum.xda-developers.com/showthread.php?t=2093195
Nixoman said:
if you installed gapps right after rom instal, you will not get anything new in system with any flashable zip, cause system memory is full...try just with roms gapps to instal., then reboot
Click to expand...
Click to collapse
i shouldn't install gapps after i flash the rom?
pandaplue said:
i'm trying
i think you should pray for me, buddy :laugh:
i'm using this rom http://forum.xda-developers.com/showthread.php?t=2093195
Click to expand...
Click to collapse
ok, i'll pray for you...
oh.. that was the first rom used for test this s2e.
Hi For All cuz the NFC Patch doesn't work I made this patch/fix for NFC just apply it by :
Download Link : http://db.tt/eVY5U7Of
1-Boot into CWM Recovery
2-wipe cache and dalvik cache
3-install the zip from SD card
4-wipe cache and dalvik cache
5-reboot the phone
Enjoy....
Working 100%
*You will can control NFC turn it on or off after 2 reboots
Don't forgot to press thanks :thumbup:
NiceIceDice96 said:
Hi For All cause the NFC Patch doesn't work I made this patch/fix for NFC just apply it by :
Download Link : http://db.tt/eVY5U7Of
1-Boot into CWM Recovery
2-wipe cache and dalvik cache
3-install the zip from SD card
4-wipe cache and dalvik cache
5-reboot the phone
Enjoy....
Working 100%
*You will can control NFC turn it on or off after 2 reboots
Don't forgot to press thanks :thumbup:
Click to expand...
Click to collapse
For gt-s6500d or gt-s6500?:-s
blurhns said:
For gt-s6500d or gt-s6500?:-s
Click to expand...
Click to collapse
oh common man NFC just For S6500 Model cuz it's a hardware inside the phone not software
I try this fix but nfc only work to receive (I try photo and music from my galaxy s3) when I try to send to my s3 I receive a link to the market... Why?
Sent from my GT-I9300 using Tapatalk 4 Beta
I don't know me too I'm facing this problem but at least it's working
Sent from my GT-S6500 using xda app-developers app
Hi may I ask what is the problem with the original patch? I don't use NFC so I haven't tested it but iyt does turn on and off ( again, I'm talking about the original patch from theWhisp). Also, the problem you mention above is only S3 specific?? I mean, this patch works OK with everything else??
Hi I found this :
http://forum.xda-developers.com/showthread.php?t=1843797
Perhaps it is S-beam problem? Can someone try and confirm ? (I have no device with s-beam)..
bleached said:
Hi I found this :
http://forum.xda-developers.com/showthread.php?t=1843797
Perhaps it is S-beam problem? Can someone try and confirm ? (I have no device with s-beam)..
Click to expand...
Click to collapse
I can send and receive liks, youtube videos etc. with this patch.
The NFC Fix does not work for me! I have the latest CM10. Looks like more files are missing.
MrMateczko said:
The NFC Fix does not work for me! I have the latest CM10. Looks like more files are missing.
Click to expand...
Click to collapse
No you are wrong you just wipe cache and dalvik cache install zip re wipe install zip
Sent from my GT-S6500 using xda app-developers app
I don't see the point of doing two wipes but if they are necessary, then I'll try it.
EDIT: I've done everything exactly as you've told, I did 2 reboots, and still no NFC.
Maybe it's because I've used Universal Odex Script before?
MrMateczko said:
I don't see the point of doing two wipes but if they are necessary, then I'll try it.
EDIT: I've done everything exactly as you've told, I did 2 reboots, and still no NFC.
Maybe it's because I've used Universal Odex Script before?
Click to expand...
Click to collapse
Weird !?:what:
Sent from my GT-S6500 using xda app-developers app
Hello. Thanks a lot for the patch. It works on the 18.07 cm 10.1 build on my phone immediately(without 2 reboots). However it doesn't work on the latest build (18.08). Any chance to fix that?
nfc is disabled in the kernel on 18/08
TheWhisp said:
nfc is disabled in the kernel on 18/08
Click to expand...
Click to collapse
okay thanks for info cuz i didn't try it on the latest build
NFC-SMARTAGS said:
hello, on cm10.1 20130718 this patch works, but with the latest cm10.1 rom , the nfc was disabled from the kernel,
please some one can port the latest cm10.1 with the NFC, thanks
i'm not alone we are many users to have the s6500 with NFC
thanks a lot
Click to expand...
Click to collapse
I know and I asked thewhisp for kernel with NFC support but he didn't reply to me so you have to try you he should answer you and I would be happy to test the kernel
Sent from my GT-S6500D using xda app-developers app
NiceIceDice96 said:
I know and I asked thewhisp for kernel with NFC support but he didn't reply to me so you have to try you he should answer you and I would be happy to test the kernel
Sent from my GT-S6500D using xda app-developers app
Click to expand...
Click to collapse
Me too
droper_250 said:
Me too
Click to expand...
Click to collapse
reupload plzzzzz
Can someone re-upload the patch?
I need to know what were the blobs (NFC libraries) inside...
If someone can share it with me, I'll be able to test the blobs
hello.
does this fix enables nfc feature on lineoage cm13 for samsung s3 mini (i8190n)? that would be great...
hey
i installed cm 11 (4.4.2) and i cant rotate my screen i mean it is rotate but in wrong positions or sometimes its not rotate at all
someone know how to fix it?
pizzadox11 said:
hey
i installed cm 11 (4.4.2) and i cant rotate my screen i mean it is rotate but in wrong positions or sometimes its not rotate at all
someone know how to fix it?
Click to expand...
Click to collapse
What do you mean with "wrong positions"?
You can try to do a factory reset, wiping chache and wiping dalvik chache ... and install the rom again ... I cant make it sure that it will work after this, perhaps your sensor is a little big laggy ... but please be more specific with your problem
Flo0008 said:
What do you mean with "wrong positions"?
You can try to do a factory reset, wiping chache and wiping dalvik chache ... and install the rom again ... I cant make it sure that it will work after this, perhaps your sensor is a little big laggy ... but please be more specific with your problem
Click to expand...
Click to collapse
dude wipe its the last thing i will do for auto screen rotation
by the way look https://www.google.co.il/search?cli...F-8#q=screen+rotation+not+working+4.4&spell=1
pizzadox11 said:
dude wipe its the last thing i will do for auto screen rotation
by the way look https://www.google.co.il/search?cli...F-8#q=screen+rotation+not+working+4.4&spell=1
Click to expand...
Click to collapse
Perhaps it is a common CM 11 issue, ask in CM11 Thread in Original Android Development, perhaps anybody has the same issue
Flo0008 said:
Perhaps it is a common CM 11 issue, ask in CM11 Thread in Original Android Development, perhaps anybody has the same issue
Click to expand...
Click to collapse
its a problem in kitkat not in the rom
pizzadox1 1 said:
its a problem in kitkat not in the rom
Click to expand...
Click to collapse
You did factory reset after installing?
Sent from my GT-I9070 using Tapatalk
In advanced setting there is an option to calibrate gyroscope (rotation).
Sent from my GT-I9070P using xda app-developers app
That's not a common cm issue, I've never experienced such issue and most people either
Sent from my GT-I9505 using xda app-developers app
Frapeti is right.
sent from Galaxy S Advance
It happens when u checkn 'use Calibration data' For acceleration sensor in galaxy s advance settings app. Uncheck that and you are good to go.
Sent from my GT-I9070 using xda app-developers app