[Q] HD+ CM10 CLM - backup no internal sd and flashing - Nook HD, HD+ Q&A, Help & Troubleshooting

Quick noob questions.
1. When using CWM to backup, it all runs fine when it is finished at end it says no internal sd then skipping. Is this normal? Is everything backed up then if it has only apparently backed up the external sd?
2. Using CWM to install CM10 + gapps. Does this modify internal storage in anyway or is it just flashing to the external SD card. Note I am not rooting my device just installing these 2 things. The reason I ask is that I am having issues with device and I'm going to return it, dont want there being any evidence on the device. If there is evidence or files put on device through installing/flashing - how do I remove it?
Question 2 also applies to the new hybrid method by leapinar as I have thinking of using this when I get new device. Note at moment I have just used old method on forums.
Thanks in advance.

1. That message says no external SD, so skipping. Don't worry, it is doing what you need it to do. If you used the CM10 CWM, it backs up the /system and /data files that are on the SD and puts the backup files on the SD media partition. If you used the stock CWM, it backs up /system and /data from internal and puts the backup files on the CWM SD.
2. When you flash the CM10 and gapps, there is nothing put on internal memory. The only thing it does is put a log file on /cache saying you installed CM10. You can go to /cache/recovery in CM10 and delete that last.log file and there would be no evidence you did anything.
As far as the Hybrid, it does install some things to internal memory, but only data. To get rid of that, do an erase and deregister in stock before you turn it in and that will clear it. You should do that anyway any time you exchange your device to get all of your personal info off of there.
Sent from my Nook HD+ running CM10 on SD

Related

[Q] Internal SD card not recognized CyanogenMod 7 nightly

I've just now flashed the latest Cyanogenmod 7 nightly on my O2X, and I'm experiencing a problem with my internal SD card.
Any app that want to use the internal SD card is unable to do so because supposedly the card is not mounted, while under Settings - Storage - Internal SD Card, it gives me an option to unmount the card. I've tried unmounting and mounting again, but that didn't do anything.
When I connect my phone to my laptop using USB, the only option I get is the USB Debugging (if I have that on). The only way to get the option to turn on USB storage is if I power off the phone, connect the USB and then power up the phone. That way I get the option to turn on USB storage, but when I do that, nothing happens on the computer or the phone.
If I reboot the phone in recovery mode, then I can select instal zip from internal sd card and then see the different folders on the card, but I have not dared to see if can actually flash Cyanogenmod again in fear of not being able to get any kind of contact with my sd card.
Now I realize that there are ways of fixing this issue, but is there a way that will help me keep the data I have on my internal sd card? I have a lot of information on it that I don't want to lose at all.
Even ideas of how I could backup the internal sd card so that I can just go crazy and format the card would highly appreciated! I've tried the Software Data Cable app, but that didn't work either.
Any help you can give me would be a major relief as I have been struggling with this problem through the night without much results.
Some info:
Before flash: Stock Gingerbread (Android 2.3.4)
Flashed ROM: CyanogenMod-7-20120313-NIGHTLY-p990 (Android 2.3.7)
Phone: LG Optimus 2X p990
No external SD card
Accessing internal storage
Go to settings - CyanogenMod Settings - Application
And check the Internal storage box.
If you have issues with some apps check the "allow moving.." as well
AND change the install location to internal. On automatic this should work anyway since you are not using an externalSD.
--- REMEMBER TO REBOOT---
If you are still having problems fix permissions and reflash the same nightly or a newer one. (data is not lost... dont wipe)
Dont think this applies to you.. but just in case.
If you still have issues with any apps and their settings. Delete the app data at the Application Manager. Then before opening/running the app, delete its associated folders on the sd. (You should be able to mount by now.) Reboot and things should be working fine. Dont worry about this last paragraph if you are not having issues with apps not saving data/starting/cant find sd card etc. Since you dont have a external SD.
Yeah, I found this out just two minutes ago, and now everything works! Thanks a lot elkhawkes!
Woah, I'm happy now!
I don't see why this isn't standard in CyanogenMod though. What are the benefits of "hiding" the internal SD card like that? Is it considered that people who flash CyanogenMod doesn't have anything useful on their internal SD, but rather the external one? At least for me, I had a lot of application data, pictures and text files I needed on the internal SD card.
Well, anyways, all is well for me now, so far...
Ok, I've noticed a problem.
You were right about some apps having problems. It seems like Whatsapp and SwiftKey is unable to save their stats. Message count and keystroke count returns to 0 every time I reboot. Its not the biggest problem, but it might be a symptom of a bigger problem, so I want to fix it.
I have tried all the different suggestions you mention for solving problems with apps, but none of them work. Even when I delete the Whatsapp folder on the internal SD card, the app still has problems saving its stats. I guess that might be because there are more Whatsapp files in one of the android folders on the card.
I was thinking that I might be able to do this sequence of things to fix it, but I'd like to get some confirmation that it might work and I won't brick my phone or will be having to buy and external SD card:
1. Copy everything on the internal SD card to my computer. (Already done!)
2. Re-flash the latest CyanogenMod nightly (and Google Apps) from the internal SD card using ROM Manager and delete all data cache, dalvik and so on.
3. Before installing any apps I go to Settings - CyanogenMod settings - Application and check Use internal storage. That way my internal SD card will be "visible".
4. Go to Settings - Storage and then selecting Erase SD card (note this is the internal SD card, I do not have an external card).
Questions:
- Will step 4. delete everything on the SD card, including all files in the Android folders?
- Will I still be able to use my phone with Cyanogenmod without having any files on the internal SD card (and no external card in the phone) or does flashing CyanogenMod or any other ROM on the phone install crucial files on the internal SD card? I want to know this for sure, because if I can't, then I will have no way of returning to a working ROM or flash a new one. I want to avoid a brick at all cost.
- Can I then start installing all the apps I want and then trying to copy only the folders containing for example the media and messages folders for Whatsapp back to the SD card to recover those on the fresh install?
** What about the Factory data reset option in CyanogenMod? Is that something I can use for this? Will the phone be reset to "factory" with CyanogenMod installed and no other old files on it, so that everything is fresh and I can install my apps and then copy media/backup folders to get the apps running without problems and with my old media?
Any help with this matter would be highly appreciated!
Testing7 said:
Questions:
- Will step 4. delete everything on the SD card, including all files in the Android folders?
Click to expand...
Click to collapse
Yes.
- Will I still be able to use my phone with Cyanogenmod without having any files on the internal SD card (and no external card in the phone) or does flashing CyanogenMod or any other ROM on the phone install crucial files on the internal SD card? I want to know this for sure, because if I can't, then I will have no way of returning to a working ROM or flash a new one. I want to avoid a brick at all cost.
Click to expand...
Click to collapse
Short answer: Yes. Long answer: No properly made Android version should depend on certain files being present on the SD-card. CM7 is a "proper" version.
- Can I then start installing all the apps I want and then trying to copy only the folders containing for example the media and messages folders for Whatsapp back to the SD card to recover those on the fresh install?
Click to expand...
Click to collapse
You should in most cases be able to do that, yes. You may run into trouble if you copy the data back after installing the app if it is running at the time. You may want to mount USB storage/copy data while in CWM to be sure that does not happen.
** What about the Factory data reset option in CyanogenMod? Is that something I can use for this? Will the phone be reset to "factory" with CyanogenMod installed and no other old files on it, so that everything is fresh and I can install my apps and then copy media/backup folders to get the apps running without problems and with my old media?
Click to expand...
Click to collapse
Yes, you should be able to do this. (Be aware that a factory reset, whether built-on or CWM, does not delete anything on the SDcard.) Some apps may initialize their external storage on the first start, some apps may find inconsistencies in the external data, especially if they use som kind of secure or encrypted storage, but that is probably not very common
Fix for apps
... Follow the steps in my post above and then uninstall the effected app, reboot and install again.
If you have backed up the whatsapp folder. Put it back on the sdcard before running the newly installed whatsapp and it should ask to import the backed up files.
- I think it only works if you place the files back before running the freshly installed app.
I`m guessing you might have tried this already. Hope this helps
Like Testing7 said, the files visible on the sd card are safe to delete but erasing the sd and factory resetting is probably not necessary. Personally I backup my important folders.. whatsapp etc on the pc regularly and erase the sd all the time. Its not really neccessary and I do this because I like to keep it clean and its just a "bad" habit from testing out different roms. The folders there are generally just clutter and also use a minimum amount of space, so really it is up to you. They do build up again pretty fast so dont worry about it.
- If you are still having problems... Just start from scratch again
# Backup - SMS and apps... I use Sms/app backup and restore... 2 separate apps on market (both free).
# Copy necessary folders and files to pc - then erase SD
# Recovery - Wipe cache, factory reset, Dalvik, battery stats ... on full battery
# Reflash nightly cm7
# Change all settings like in my first post and then reinstall all apps and backup files.
# And remember to restore files first before running the apps for the first time

[Q] CM10 and AOKP - Internal, SD card and USB storage mapping broken

I've got a Samsung Galaxy Note n7000. I've hopped around a bit, but recently I've tried to move (back) to JB based CM10 (nightly) and also AOKP (JB Milestone 1).
For both CyanogenMod and AOKP, I quickly came across the issue that most apps can't see any storage folders. This includes:
-Browser and Chrome can't save files as there's 'No storage'.
-Google Maps won't cache anything.
-The camera and gallery won't work because they can't see any storage.
-When I plug the phone in to a PC via USB, the phone is identified, but no storage folders come up, regardless as to whether I'm using MTP or MS.
-In the system settings under storage, it can see the 2GB for my app Data partition. It says there's a 32GB SD card available, but under the Internal Storage heading, clicking 'Mount SD card' flashes up something in the notification bar before looking like nothing happened. There's nothing about the internal ~10GB partition either.
However, if I go into a file browser, I can see both the internal storage mapped as /storage/sdcard0 and the SD card mapped as /storage/sdcard1. I believe this is how JB is now mapping storage now? Why is it confusing itself?
Note:
-I can see the storage in CWM without issues (although internal and SD might be reversed???).
-I can read the files fine from a file manager, so there's nothing wrong with the SD card as far as I can tell. It works fine in an SD card reader too.
-I tried AOKP first after a full wipe (factory, data, davlik), hit the issue. Tried CM10 which was the same. Tried AOKP again with a factory wipe before and after flash and it still didn't work.
I've been trying to find a solution for nearly 2 weeks now! Please help before I give up and flash back to a Samsung based ROM!
For history:
I've had the GNote unlocked for a while and I've played with a few ROMs including CM9, earlier releases on CM10 without any issues. For the past couple of months I went back to an ICS TouchWiz based ROM as I thought the only way to get an MS Exchange email email app with full device encryption was to use Samsung's.... anyway, found an app that'll do it for me without suffering the slow down of encrypting the whole phone AND putting TouchWiz on, so I thought I'd try to go back to a 'pure' ROM until I ran into the above problem... Is it because I previously had the phone fully encrypted? I can see the folders now though.... AAAARRRRGGH!
...
Just in case it was an issue that has been fixed recently.... I tried ParanoidAndroid for the Note (v2.54 10 Nov 2012)... same issue. I did a factory reset, cache wipe and davlik wipe before and after flashing. Still both internal and SD storage are mapped so the apps and System settings can't see them.
What is wrong?
Update 2...
I tried flashing the following ROMs:
-A TouchWiz based ICS ROM (Sweet v5)
-A stock based ICS ROM (CM9.1)
-A TouchWiz based Jelly Bean ROM (Rocket Bean V2)
-Re-flashing CM10 nightlies
In every case both the internal and SD storage can't be seen in System>Storage.
What have I done???? Have I somehow screwed up the formatting on both the internal and SD card, yet CWM can read it??? Any ideas?
im on a XXLS7 based rom and its in
/storage/extSdCard
/storage/sdcard0
may be you want flash a stock GB or ICS rom again using Odin and start fresh
I haven't tried Odin yet... but when I was about to, I discovered something. I installed Titanium Backup. Instead of complaining I didn't have any storage (like all other apps), it complained that my storage directory wasn't writeable...
How do I check what the permissions are? What should they be? How do I fix it?!!!
Thanks.
Hi!
I have the same issue.
I'm currently on RocketRom V3 but I had the issues with others roms before.
I have a temporally fix: using root explorer, set the permission from r/o to r/w for the folder /mnt/sdcard
But after a while (fews minutes), it turn back to r/o, I don't know who/why.
Same here. Thought it was me!
Started when I switched to jb leak.
Says storage us full when I try to open camera,etc, even though it's not true
Sent from the man hiding in your attic.....
Ok, I found an fix that works for me
It looks that I had a bad file/folder/whatever on my internal storage, so the system put /sdcard (internal memory) on read only as it notice the bad thing.
Formating sdcard or emmc from cwm didn't work, full wipe neither, formatting internal from android settings neither, but I manage to mount internal SD on my computer using mass strorage (UsB switcher is included on Rocket V3 to switch from MTP to Mass storage)
Once mounted in Windows, I did a full format (fat32) of the internal memory, and so far it works!
I re-formatted my SD card in a memory card reader. I've put it back in the phone and now when I plug my phone in to my PC and select USB mass storage, the SD card comes up in Windows and I can write to it! Woot!
At the moment I still can't write to my internal storage (which means most apps still complain). It appears as a drive in Windows via USB, but I can't open it. I'll try Feyris' RocketRom suggestion later.
Any guess as to why this has happened? Anything to do with the fact I had full-device encryption on the phone before????
Is there any way to sawp the card location as on im on jb its taking external card as internal default location..As i am having class 4 sdcard so itz slowing down the system
Feyris said:
Ok, I found an fix that works for me
It looks that I had a bad file/folder/whatever on my internal storage, so the system put /sdcard (internal memory) on read only as it notice the bad thing.
Formating sdcard or emmc from cwm didn't work, full wipe neither, formatting internal from android settings neither, but I manage to mount internal SD on my computer using mass strorage (UsB switcher is included on Rocket V3 to switch from MTP to Mass storage)
Once mounted in Windows, I did a full format (fat32) of the internal memory, and so far it works!
Click to expand...
Click to collapse
When I put my Rocket V3 into the mac with usb switcher it mounts two drives. Both, however, are part of the internal SD card. It does not mount the proper external sd card. One is titled sdcard of the drives just called sdcard, the other is called storage (which has folders sdcard0, extSdCard, and usbstorageA-F). Should I format them both? Do I need to recopy all the files back onto the sdcard before booting up again?
Thanks!
Edit: I was either totally confused (most likely) or somehow I managed to fix my issue (less likely)...so I am ok now.
Internal Storage Mount
So I am having a similar issue.
I have an Evo 4g LTE running CM10 (cm-cfX-20120904-OFFICIAL-jewel)
I tried upgrading to the 11-13 build from get.cm site. I factory reset, wiped delvik, installed .zip from external sd card, installed gapps (gapps-jb-20121011-signed) wiped delvik again, rebooted, everything came up like it should, but I had no mobile data connection. All of my settings said unknown. So I rolled back to the (cm-cfX-20120904-OFFICIAL-jewel) build. Everything was working fine again, except I went open CWM v 5.8.3.5 from my app drawer and noticed message "you need sd card to run clockworkmod" so I went to sys settings > storage > internal storage (not mounted > mount storage and it attempts to read the data, but then does nothing. No error message or anything. I can't get my computer (windows 7) to read my internal storage so I can't format (which I have already done before)
I'm getting really frustrated as I have searched everywhere for the fix and have found nothing. If anyone has any idea I would greatly appreciate it.
Finally got around to spending a few hours on this yesterday to try to fix my 'missing' internal storage...
As suggested by nokiamodeln91 (cheers mate), I used Odin to go back to a stock ROM. Steps:
-Did a CWM backup of my current my current favourite ROM (I also used Titanium and SMS backup, but didn't need it in the end).
-Found an appropriate Samsung factory ROM. I went back to 2.3.6 as it's supposed to be safer. (For the n7000, make sure you choose an early one and not 'L' series or it's harder to root.)
-Used Odin to write the factory ROM. Note I only wrote the ROM, I didn't flash the modem, PIT, etc.
-Confirmed that I could see both my internal storage and my SD card (and also confirmed that a factory fresh install from Samsung looks and feels as ugly as I remembered).
-Used an 'update' hack to give me root.
-Installed CWM again.
-Simply restored my CWM backup of my favourite ROM...
In reality I went down several dead-ends... but I eventually got it all working again.
Guigsy said:
Finally got around to spending a few hours on this yesterday to try to fix my 'missing' internal storage...
As suggested by nokiamodeln91 (cheers mate), I used Odin to go back to a stock ROM. Steps:
-Did a CWM backup of my current my current favourite ROM (I also used Titanium and SMS backup, but didn't need it in the end).
-Found an appropriate Samsung factory ROM. I went back to 2.3.6 as it's supposed to be safer. (For the n7000, make sure you choose an early one and not 'L' series or it's harder to root.)
-Used Odin to write the factory ROM. Note I only wrote the ROM, I didn't flash the modem, PIT, etc.
-Confirmed that I could see both my internal storage and my SD card (and also confirmed that a factory fresh install from Samsung looks and feels as ugly as I remembered).
-Used an 'update' hack to give me root.
-Installed CWM again.
-Simply restored my CWM backup of my favourite ROM...
In reality I went down several dead-ends... but I eventually got it all working again.
Click to expand...
Click to collapse
Dude! you are insane...Got my S2 4.1.2 working, thanks to you.. tried for 3 days back to back until i stumbled on your solution.
Thanks so much.
A BIG Thanks to Guigsy & nokiamodeln91
Long story short is I broke the screen to my GNote 2 which is on its way to Samsung for repair (A little under US$200 round trip). When I removed the battery to get the emie number there was "goo" oozing out the back from the screen I suspect.
Anyway, turned on my GNote 1, which hasn't seen the light of day since last October and booted to discover that it wasn't working right. I tinkered for quite an embarrassingly long time to where I found myself in the same situation as others here. No write access to the internal storage on my CWM rooted GNote.
Although I had a nand backup, I ended up using ODIN to flash LT4 Germany, lost root as a result. went back in to Download mode and used ODIN to install PhilZ-cwm6-XXLT4-OXA-5.00.5.tar the exact same way, booted into CWM recovery and flashed PhilZ-cwm6-XXLT4-OXA-5.00.5-sigend.zip and was good to go. Issue definitely resolved.
I did not have root after installing the PhilZ-cwm6-XXLT4-OXA-5.00.5.tar via ODIN but I was able to enter CWM recovery where I then installed the ZIP version. As I had fixed my issues I was able to copy over the ZIP version to my Ext SD card B4 going into recovery mode (Yup, one of the symptoms for me was not being able to copy to the external SD card when the phone was connected to my PC either).
Rebooted signed in and was quickly synching my apps, settings etc. I would have felt comfortable using the nand backup I had originally but since this solution brought me up a few versions of Android, I just did a fresh setup.
Had it not been for XDA and our friends here, I would have formatted, factory reset and who knows what else trying to fix this.
Thanks much,
Claude H.

[Q] SafeStrap 3.0.x, multiple ROMs, and installing to SD card

Hello,
I've been patiently following this thread http://forum.xda-developers.com/showthread.php?t=1804665 for the past several months. Thanks to the selfless, hard work of Hashcode, dhacker, and also sylentprofet and jarveson (and apologies to anyone I haven't credited), the recent builds seem to have arrived at a level of functionality and stability that I'm thinking of trying to install my first custom ROM (I've already had SafeStrap 3.0.x installed for months).
My question is the following: I understand from the above thread and from Hashcode's blog that now the external SD card will be used as the default storage location. I was wondering what happens when an app is "installed to SD". From my previous experience on an original Motorola Droid, I know that "installing to SD" would move some files to a special directory on the SD card. I was wondering if this would cause collisions if the same app was installed under multiple ROM slots using SafeStrap.
Thank you for entertaining this newbie's question.
Actually the way I understand it is there is still the internal storage and external SD which are the same, but the internal storage gets partitioned separate from the rest of the storage so if you install an app to the SD card, I think it just goes in a regular folder. The system thinks the /system partition is in the regular storage for it but it actually is tricked to the internal storage.
I hope that makes sense.
MrObvious said:
... so if you install an app to the SD card, I think it just goes in a regular folder ...
Click to expand...
Click to collapse
Thank you very much for your response.
Is this regular folder on the external SD card? If so, does it mean that this regular folder will be shared by the ROMs in multiple slots if I have the same app installed under the ROM in multiple slots?
Thank you again.
alvin_a_garcia said:
Thank you very much for your response.
Is this regular folder on the external SD card? If so, does it mean that this regular folder will be shared by the ROMs in multiple slots if I have the same app installed under the ROM in multiple slots?
Thank you again.
Click to expand...
Click to collapse
If it's on the external SD then yes it is.
I had the same doubt when I recently started using ROMs on my Droid3. This thread helped me a lot.
I have lots of apps in my stock ROM that I've installed before rooting it. Do I have to install it all again on external SD? If yes, do I have to use a new flashed ROM or the stock ROM?
Thiago AmP said:
I had the same doubt when I recently started using ROMs on my Droid3. This thread helped me a lot.
I have lots of apps in my stock ROM that I've installed before rooting it. Do I have to install it all again on external SD? If yes, do I have to use a new flashed ROM or the stock ROM?
Click to expand...
Click to collapse
On minimoto I noticed it was using the exact same sd configuration as stock, perhaps because its stock based. On CM10 the external SD card is the default /sd card but you can still access the internal sd.
Regardless of how the sd card is configured you'd still have to reinstall apps when going to another ROM. I recommend using Titanium Backup then its quite simple to restore apps on another ROM. For SD data you could just manually copy and paste the folders from the internal to external SD.
spunker88 said:
On minimoto I noticed it was using the exact same sd configuration as stock, perhaps because its stock based. On CM10 the external SD card is the default /sd card but you can still access the internal sd.
Regardless of how the sd card is configured you'd still have to reinstall apps when going to another ROM. I recommend using Titanium Backup then its quite simple to restore apps on another ROM. For SD data you could just manually copy and paste the folders from the internal to external SD.
Click to expand...
Click to collapse
Thanks! So, a separate partition on SD Card would be a waste of "space", since the ROM's doesn't share acess to this partition. I've only tried with CM10, I'm going to try with MavROM and Minimoto, but i'm almost sure that I'll end backing all up with Titanium.
Thiago AmP said:
Thanks! So, a separate partition on SD Card would be a waste of "space", since the ROM's doesn't share acess to this partition. I've only tried with CM10, I'm going to try with MavROM and Minimoto, but i'm almost sure that I'll end backing all up with Titanium.
Click to expand...
Click to collapse
Sort of kind of. Basically this would be useful if you want to share apps and their settings between the custom and Stock ROMs installed on your phone [may be odd on an app by app basis depending on a few things but a good number *should* work [I dont use external SD as it eats the battery and is MUCH slower than using the /data partition so haven't tested this], so following should be close if not 100% correct
You would in stock ROM set your apps2SD app up [I DO NOT advise you to use the sdcard function found in manage apps>app area instead you should be using an app like Link2SD that actually creates a partition on your external SD and formats it to EXT3 or EXT4 [suggest using EXT4]. This way things like widgets still work whereas they don't when using the built-in android function [this happens as android uses a folder on the SDCard [which is FAT32 by default] and file permissions needed to run Widgets and some code can't be copied as needed on to a FAT32 partition so by using an app that partitions [or the recovery can do this but you would still need an app to manage which apps are in this partion] the SDCard app instead actually formats part of the card to the EXT 3 or 4 File system so it is the same as the /data partion so Android can copy EVERYTHING and nothing is affected and broken.
So you open your SDCard app manager in Stock ROM and format the External SD [THIS WILL ERASE EVERYTHING RUN APPROPRIATE BACKUPS BEFORE PARTIONING [move them to a computer and back if you dont have enough internal storage to absorb your data]]
When that completes open the app again [usually needs a restart first to mount the new partition before continuing].
Once you get that done open the Manager app and select the apps to move to this new partition.
CUSTOM ROM: Now once that is done boot in to safestrap and either setup a Custom ROM or change to it's boot slot. Next boot in to Custom ROM and install the same SD Card App Manager you used in Stock.
Next, once you open it it should say it found a partition and ask if you want to use it if it doesn't and just lists the app view the settings in the Manager app and HAVE IT SETUP AN EXISTING PARTITION. DONT PARTITION YOUR SDCard AGAIN [or all your newly moved data will bite it].
Now restart and allow it to boot back in to the Custom ROM again. Once this happens all the apps you moved to the SDCard partition should magically appear and be usable.
SO LONG AS YOUR STOCK AND CUSTOM ROMs ARE THE SAME VERSIONS DONT DO THIS IF YOU HAVE ICS ON THE SAFE SIDE AND JELLYBEAN AS A CUSTOM ROM IT WILL MOST LIKELY CAUSE ALL KINDS OF PROBLEMS

[Q] HD+ Hybrid Install to EMMC

So I have the hybrid install working per instructions here: http://forum.xda-developers.com/showthread.php?t=2300132
I've decided to install full and overwrite stock emmc. My computer is out of commission for the foreseeable future so I was wondering if its possible to migrate to native install by simply downloading the files for 10.1 emmc and emmc recovery to the internal memory/SD card, booth from hybrid/SD recovery and flash those files?
Don't care about saving current apps/data, I'm fine with clean install.
All help is appreciated. Not a newb but need some help.
Thanks
You could do it that way, but it is best to use this procedure:
Copy the two files to internal memory.
Boot to the SD and install the emmc recovery from internal memory.
Remove the SD and boot holding the power key and n key as soon as the nook logo appears, releasing after a few seconds, putting you in the new emmc recovery.
Do a nandroid backup to internal memory.
Do a factory reset/wipe data.
Flash the new CM10.1 ROM zip from internal memory.
Reboot and everything should be good.
Sent from my Galaxy Tab 2 using XDA Premium
leapinlar said:
You could do it that way, but it is best to use this procedure:
Copy the two files to internal memory.
Boot to the SD and install the emmc recovery from internal memory.
Remove the SD and boot holding the power key and n key as soon as the nook logo appears, releasing after a few seconds, putting you in the new emmc recovery.
Do a nandroid backup to internal memory.
Do a factory reset/wipe data.
Flash the new CM10.1 ROM zip from internal memory.
Reboot and everything should be good.
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
Thanks leapinar this worked great. Downloaded twrp redovery , 10.1 emmc to internal storage, booted from hybrid SD recover, flashed twrp recovery, removed SD, rebooted, flashed 10.1.
Working great except new emmc install doesn't allow landscape lock screen whereas hybrid 10.1 did. Guessing this will be fixed in future update. Thanks for the help and all the great work.
Thought I'd drag this thread up instead of starting a new one as I went down a similar path. I was running bokbokans hybrid and followed the instructions in this thread to move to a EMMC install (Carbon ROM) which went fine.
I just have a few questions on the transition to EMMC:
1) How can I get rid of the Cyanoboot menu that pops up briefly at start up as I won't need this any more.
2) If I look at my SD card in CM file manager (or on a card reader in Windows), it's just showing me the boot partition (115MB). Is there any way of accessing the data/files on there or should I just reformat the card to get the storage back (it would be useful to copy over some of the stuff I had on there but it's not essential).
3) If I look at the Internal Storage, it has a sub-folder called "0" which replicates some of the folders etc from the main internal storage area. Is this a carry over from the hybrid installation, ie. can I delete this sub-folder?
Thanks
BillBong said:
Thought I'd drag this thread up instead of starting a new one as I went down a similar path. I was running bokbokans hybrid and followed the instructions in this thread to move to a EMMC install (Carbon ROM) which went fine.
I just have a few questions on the transition to EMMC:
1) How can I get rid of the Cyanoboot menu that pops up briefly at start up as I won't need this any more.
2) If I look at my SD card in CM file manager (or on a card reader in Windows), it's just showing me the boot partition (115MB). Is there any way of accessing the data/files on there or should I just reformat the card to get the storage back (it would be useful to copy over some of the stuff I had on there but it's not essential).
3) If I look at the Internal Storage, it has a sub-folder called "0" which replicates some of the folders etc from the main internal storage area. Is this a carry over from the hybrid installation, ie. can I delete this sub-folder?
Thanks
Click to expand...
Click to collapse
1. You don't want to get rid of the cyanoboot logo. It is used to get Carbon going.
2. You eventually want to format the SD with SDFormatter to get the space back. But if you can still boot to the hybrid, then copy your media files from it first using MTP to your PC. If not then just format over.
3. That 0 folder is part of your new setup. Leave it alone,
Sent from my Galaxy Tab 2 using XDA Premium

Nook HD 10.2.1 Can't access external SD

Hello,
It's my first post here.
I have a Nook HD rooted with 10.2.1. We I rooted the Nook, I made an external copy to the PC of the stock rom.
All was OK, until I tried to upgrade to cmw 11.
It gave me an Status 7 error and was imposible to upgrade.
Then I went back to the 10.2.1, but now the external SD Card is not mounted. I can't format it from the Recovery menu.
I can't read it from the Nook. I tried 3 different SD cards, but always the same.
The recovery CMW is 6.0.3.6.
When I try to format the SD card from it, it says "Error mounting /external_SD!"
When I enter the Nook in normal mode, the SD Card can not be activated. It detects the SD Card, bau can't do anything.
¿Any idea or help?
Thx!!
UPDATE: I have boot into normal mode, downloaded de Recovery CWM-5 (Recovery 6.0.4.6), and installed it from the internal memory.
After that, I succeeded on installing the CM11-M6, but still the same issue.
Can't activate/access/mount/format the SD Card, from the Android "Activate card" or from the recovery menu "Format" or "mount".
I also formatted it with SDFormatter, but nothing changes.
The SD card it's ok, as I can write/read from the PC.
I have 3 of them: Samsung, Sandisk and Trascend. None of them is recognized, and before I had no problems with them and CM 10.1
Well,
I think is finished!
I had a problem with Google apps, and installed them again, but I had at the internal memory the 4.3 GApps, and I didn't take care of the version!.
Instead of the correct GApps for the 4.4, I installed the previous one.
After installing them, I always have now "unfortunately, Android Keyboard (Aosp) Has Stopped"
So I have no keyboard!!!!
As I can't use the external SD (It doesn't work), I tried to download from the CM11 Nook the correct GApps version, but I have not keyboard to write the internet address!!! I can not indeed write the wifi password!
I have then tried to install ADB, but I can not see the Nook under "adb devices".
I'm in the point of sending the nook to the recycled bin!
Any idea of an easy solution?
Many thanks!
Dang lots of trouble. I would suggest just sticking with CM 10.2.1 for now.
Sent from my BN Nook HD using Tapatalk
Hello,
That's what I want, to go back to 10.2.1.
But the Recovery 6.0.4.6 dos not permit to install the 10.2.1, only 11.
I would like to download to the internal memory the Recovery 4 (6.0.3.6), but as I don't have keyboard (wrong GApps installed), can't write the web address. And the external SD card doesn't work too.
The only solution I see is ADB, but when I plug the Nook HD to the PC, nothing happens. There is no change in the Management console of Administration Devices....
Don't know really what to do.!
Errabundo said:
Hello,
That's what I want, to go back to 10.2.1.
But the Recovery 6.0.4.6 dos not permit to install the 10.2.1, only 11.
I would like to download to the internal memory the Recovery 4 (6.0.3.6), but as I don't have keyboard (wrong GApps installed), can't write the web address. And the external SD card doesn't work too.
The only solution I see is ADB, but when I plug the Nook HD to the PC, nothing happens. There is no change in the Management console of Administration Devices....
Don't know really what to do.!
Click to expand...
Click to collapse
Did you go to my HD/HD+ CWM thread linked in my signature and make a bootable CWM SD per item 1a there? If you did, what are the results?
Sent from my BN NookHD+ using XDA Premium HD app
Thank you for your response.
I did what you said, making a bootable CWM as your 1a tip, but nothing happens.
The external SD card is like death.
The Nook boots on the normal CM11 mode, and never on the Card Boot mode.
But I have made some new advancement:
I realized that I can connect the Nook and the computer through Bluetooth!
So I sent to the Nook the correct GApps for the CM11, and reboot in recovery mode, installed it from the internal memory, and now I have keyboard again.
The situation now: I have the CM11-M6 installed, Recovery 6.0.4.6 and GApps gapps-kk-20140105.
But, the external SD card doesn't work. The Nook detects it, but can not activate it.
If I enter the Recovery mode, you can´t mount or format the SD card.
I have saved at the PC the Nook Stock Backup I made before rooting the Nook.
If I copy that folder to the internal memory and make a Restore BackUp, do you think that the SD card problem should be fixed?
May be the SD card problem is related to the Nook partitions. I read something about that but don't remember where. But don't really now if the Restore Stock is going to fix the partitions.
I don't want to make another step without consulting you!
Thanks!
Errabundo said:
Thank you for your response.
I did what you said, making a bootable CWM as your 1a tip, but nothing happens.
The external SD card is like death.
The Nook boots on the normal CM11 mode, and never on the Card Boot mode.
But I have made some new advancement:
I realized that I can connect the Nook and the computer through Bluetooth!
So I sent to the Nook the correct GApps for the CM11, and reboot in recovery mode, installed it from the internal memory, and now I have keyboard again.
The situation now: I have the CM11-M6 installed, Recovery 6.0.4.6 and GApps gapps-kk-20140105.
But, the external SD card doesn't work. The Nook detects it, but can not activate it.
If I enter the Recovery mode, you can´t mount or format the SD card.
I have saved at the PC the Nook Stock Backup I made before rooting the Nook.
If I copy that folder to the internal memory and make a Restore BackUp, do you think that the SD card problem should be fixed?
May be the SD card problem is related to the Nook partitions. I read something about that but don't remember where. But don't really now if the Restore Stock is going to fix the partitions.
I don't want to make another step without consulting you!
Thanks!
Click to expand...
Click to collapse
I doubt it is a partition problem causing the SD read issue. But getting back to stock may help. It could just be a glitch with CM11. You might also try cleaning the SD contacts and blowing out the slot with air.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You might also try cleaning the SD contacts and blowing out the slot with air.
Click to expand...
Click to collapse
Thanks again.
I tried three different cards from 3 brands. They all work perfectly at the computer, but not on the Nook!
I've not tried to blow air in the slot... i'll do it
I think, if that doesn't work, i'll try to go to the Stock Backup.
Thx
How can I restore the saved backup?
I have copied the backup folder yo the internal memory. After I boot into recovery. I choose Restore, but directly it says that there is no file.
Is there any special way of restoring the stock backup without using the sd card?
Enviado desde mi SM-N9005 mediante Tapatalk
Errabundo said:
How can I restore the saved backup?
I have copied the backup folder yo the internal memory. After I boot into recovery. I choose Restore, but directly it says that there is no file.
Is there any special way of restoring the stock backup without using the sd card?
Enviado desde mi SM-N9005 mediante Tapatalk
Click to expand...
Click to collapse
Yes it has to be put in a special place for CWM to see it. CM and CWM use different spots for the backups. CM uses /data/media/0/clockworkmod/backup and CWM uses /data/media/clockworkmod/backup. Notice the extra 0 folder. You will have to use your root file manager to be able to put the backup in the correct location so CWM can find it.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Yes it has to be put in a special place for CWM to see it. CM and CWM use different spots for the backups. CM uses /data/media/0/clockworkmod/backup and CWM uses /data/media/clockworkmod/backup. Notice the extra 0 folder. You will have to use your root file manager to be able to put the backup in the correct location so CWM can find it.
Click to expand...
Click to collapse
I have no success!
As I'm using CWM, I have to place the files at /data/media/clockworkmod/backup/.
I have some questions (I've tried all possibilities, but without success)
1. I have a saved backup folder (named with the date I made the backup) with .tar archives, etc. Do I have to place at the clockworkmod/backup the .tar files directly or the backup saved folder?
2. I can't find the /data/media/clockworkmod/backup folder.
I have a clockworkmod folder at /storage/sdcard0/clockworkmod. It seems to be the same as /mnt/sdcard/clockworkmod.
That clockworkmod folder is at the sdcard folder, with other folder as Alarms, Android, DCIM, etc...
At the folder level where are folders like bootdata, cache, mnt, root, etc, there is a folder named "data", but is empty, and can't write inside it.
Is it that one where I have to place /data/media/clockworkmod/backup/??
3. Can't find a folder called "media".
4. I have installed your file NookHD-CWM-6036-for-internal-memory-rev2-(03-08-14).zip as Recovery.
But I have read at your tips, that for restoring the Stock, you have to use NookHD-emmc-stock-recovery-rev0-(07.21.13). I have done nothing with that file... Is for your information, in case I'm doing something wrong.
5. As information also, when I enter the Recovery mode (6.0.3.6), there is always a message "Warning: No file_contexts".
6. Another thing!! I think that the Backup I'm trying to Restore was made with a previous CWM... that one for the CM10.1 (may be it was CWM-Recovery-2).
Could it be the problem?
Thanks again!
Errabundo said:
I have no success!
As I'm using CWM, I have to place the files at /data/media/clockworkmod/backup/.
I have some questions (I've tried all possibilities, but without success)
1. I have a saved backup folder (named with the date I made the backup) with .tar archives, etc. Do I have to place at the clockworkmod/backup the .tar files directly or the backup saved folder?
2. I can't find the /data/media/clockworkmod/backup folder.
I have a clockworkmod folder at /storage/sdcard0/clockworkmod. It seems to be the same as /mnt/sdcard/clockworkmod.
That clockworkmod folder is at the sdcard folder, with other folder as Alarms, Android, DCIM, etc...
At the folder level where are folders like bootdata, cache, mnt, root, etc, there is a folder named "data", but is empty, and can't write inside it.
Is it that one where I have to place /data/media/clockworkmod/backup/??
3. Can't find a folder called "media".
4. I have installed your file NookHD-CWM-6036-for-internal-memory-rev2-(03-08-14).zip as Recovery.
But I have read at your tips, that for restoring the Stock, you have to use NookHD-emmc-stock-recovery-rev0-(07.21.13). I have done nothing with that file... Is for your information, in case I'm doing something wrong.
5. As information also, when I enter the Recovery mode (6.0.3.6), there is always a message "Warning: No file_contexts".
6. Another thing!! I think that the Backup I'm trying to Restore was made with a previous CWM... that one for the CM10.1 (may be it was CWM-Recovery-2).
Could it be the problem?
Thanks again!
Click to expand...
Click to collapse
In order to access the /data folder you have to be using a root file manager (try root browser lite from Play Store). That is why /data looks empty without one.
Do not use the clockwork folder in /sdcard. It must be the one in /data/media.
That stock recovery zip is for restoring stock recovery. You only flash that if you want internal CWM replaced with stock recovery.
And under backup should be the folder that was created when you backed up. Usually a date. The .tar files are inside that.
Don't worry about the last two items.
Sent from my BN NookHD+ using XDA Premium HD app
821
Wow, I'm sooooo noob!!
I had already installed ES3 file explorer, and didn't find the Root User mode. Now it's activated and really can see the data/media folder.
I'm moving now the backup folder to the media folder and in some minutes I post the results (I see that It's very slow and the backup is 2gb size, and will take at least 30minutes to transfer)
Many thanks!!!
Welllll....:crying::crying::crying::crying:
I have successfully restored the Nook to the Stock Rom.
But the problem with the SD Card persists.
I bought a new SD Card, and now I have 4 different brands and sizes cards.
And with all of them I have the same issue: Damaged card. You have to format it. And after formatting, always "Damaged card"...
:crying::crying::crying:
I think is a hardware problem. Something is broken...
Thank you anyway for your help!!!
Errabundo said:
Welllll....:crying::crying::crying::crying:
I have successfully restored the Nook to the Stock Rom.
But the problem with the SD Card persists.
I bought a new SD Card, and now I have 4 different brands and sizes cards.
And with all of them I have the same issue: Damaged card. You have to format it. And after formatting, always "Damaged card"...
:crying::crying::crying:
I think is a hardware problem. Something is broken...
Thank you anyway for your help!!!
Click to expand...
Click to collapse
Time for a warranty exchange.
Sent from my SCH-i705 using XDA Premium HD app

Categories

Resources