Related
I've been running Debian natively from my SD card for a while, so I decided I'd share the [relatively easy] instructions. First, though, here's the status of the hardware support...
* X11 is working quite nicely. 480x640 resolution is best for using E17.
* I'm trying to think up a solution for the 3D accelerator. LLVMpipe works but it's not much faster than classic Mesa. Maybe that's because I'm only testing performance with Mupen64Plus and SuperTux Ideally we would have an open-source OpenGL ES 1.0 driver with an OpenGL 1.3 wrapper/Gallium state tracker, but unfortunately Qualcomm closed it
* The hardware buttons don't generate input events (except the power button, which apparently makes SDL windows fullscreen).
* USB function ether works. This means you can SSH into it or update packages without a data connection (I don't think data even works).
* Sound doesn't work because Android doesn't use ALSA - or maybe because DZO hasn't written the proper driver...
* Camera(s) would need a Video4Linux driver; again, not my area
* Bluetooth is untested.
* GPS needs userspace work (gpsd?) - maybe the HTC Dream page at HTC-Linux.org has info...
* Calling - untested because: 1) I doesn't got the software, and 2) even if it worked, I have no one to call
If you're willing to wait indefinitely for those things to be fixed (or if you don't care), all you need is a Debian chroot on an EXT2-formatted SD card and my special NBH. The NAND should also work*, but Debian probably wouldn't fit on it. These instructions should also work for Ubuntu, Gentoo, FSO/OpenMoko, Angstrom, ARMedSlack, Fedora, or what have you - the only requirements are ARMv6 or lower and a semi-standard root filesystem layout (i.e. /sbin/init).
For those of you who don't trust binaries, I've uploaded my patches to the kernel and tinboot needed for Debian to boot. For everyone else, I have NBH files ready. Just flash the NBH, insert your SD card, and it should boot.
Links:
http://www.mediafire.com/?mnv2memddug (source)
http://www.mediafire.com/?immywzmmqjn (binaries)
*LogFS patch included and enabled in my NBH.
Interesting, i'm going to have to try it out, any chance of getting it bootable from within android, like haret is with windows?
what exactly is debian??
is it like ubuntu thats on my computer
jadenj5 said:
what exactly is debian??
is it like ubuntu thats on my computer
Click to expand...
Click to collapse
yes
10char
little confused though, where do I get the debian root files though
Debian Root
Instructions to build your own RootFS follow. If you're lazy, Google for a pre-built one.
If you're on Ubuntu:
Code:
sudo apt-get install debootstrap
sudo debootstrap --arch armel --foreign unstable root/ http://http.us.debian.org/debian
Substituting "unstable" for "stable" or "testing", "root/" with the the path to the directory you want the rootfs in (probably your SD card mountpoint), and your country code in ftp.??.debian.org (or another mirror). You might also need to do
Code:
sudo mount -o remount,rw,dev,exec $MOUNTPOINT
to your SD card (which, again, should be ext2-formatted) for debootstrap to work.
Then to complete the bootstrap:
Code:
sudo apt-get install qemu-kvm-extras-static
sudo cp /usr/bin/qemu-arm-static $ROOTFS/usr/bin/
sudo chroot $ROOTFS
From inside the chroot, do
Code:
/debootstrap/debootstrap --second-stage
Then, apt-get install whatever you want on the phone (after configuring /etc/apt/sources.list), exit the chroot, unmount the card, insert it in your phone, and boot!
You'll need - at the very least - xserver-xorg-video-fbdev and xserver-xorg-input-evdev *WITHOUT* installing the other video or input drivers. And a desktop/window manager. If you haven't used Debian before, try e17.
Thanks man, i'm going to go check it out
If you're lazy, Google for a pre-built one.
Click to expand...
Click to collapse
can't find one.?
If you're on Ubuntu:
Click to expand...
Click to collapse
ubuntu 10.04 debootstrap doesnt know about stable/testing/unstable names, but knows about lenny, squeeze, sid
okay, I maked Debian unstable rootfs - here it is (127MB tar.bz2). here is dpkg -l.
root password is "1", apt sources.list is configured to most close to me mirror. I also added /proc into fstab.
how to pack my rootfs into .img image now?
can you post a screenshots please ???
there is nothing to show now, really. we need to make working pack first.
google e17 screenshots, on device you will have same.
a note about the sound issue. You are correct in that the vogue kernel does not have alsa support at this time.
nice job on this
Code:
E: No such script: /usr/share/debootstrap/scripts/stable
debootstrap installed with no errors but that's what I get when I try to run
Code:
sudo debootstrap --arch armel --foreign stable /media/79e9dd5a-174b-4324-a704-6aa06807fe35 http://http.us.debian.org/debianc
Try "lenny" instead of stable.
gTan64 said:
Try "lenny" instead of stable.
Click to expand...
Click to collapse
progress but now i get
Code:
I: Retrieving Release
E: Failed getting release file http://http.us.debian.org/debianc/dists/lenny/Release
Look closely - the mirror URL doesn't contain "debianc", does it?
gTan64 said:
Look closely - the mirror URL doesn't contain "debianc", does it?
Click to expand...
Click to collapse
I'm F-ing retarded
/facepalm
-Edit- any packages you would advise to install?
New problem
Code:
[email protected]:/$ sudo chroot /media/79e9dd5a-174b-4324-a704-6aa06807fe35_
chroot: cannot run command `/bin/bash': Exec format error
Could it be because sudo apt-get install qemu-kvm-extras-static had no packages and I had to install sudo apt-get install qemu-kvm-extras
Code:
sudo cp /usr/bin/qemu-arm-static $ROOTFS/usr/bin/
This step is essential - without qemu-arm-static in your chroot, you won't be able to run/emulate any ARM binaries (in this case, Debian-armel's /bin/bash).
Yes, you do need the static version. Last I checked it was actually in the Ubuntu repositories, so look again...
As far as what packages to install, here you go.
Essential packages: xserver-xorg-{video-fbdev,input-{mouse,keyboard}}
Essential desktop packages (pick one): e17 fluxbox lxde xfce4
Recommended packages: cellwriter xfce4-goodies
Suggested packages: Whatever floats your boat.
Packages I installed even though having no sound makes them useless: zynaddsubfx supertux sopwith bomberclone
aMpeX proudly presents:
The Step-By-Step guide for building CM7
for the Optimus 2X
Disclaimer:
I'm taking no responsibility for any damage that might occur to your phone or your PC
This guide illustrates how to setup an UBUNTU 11.04 equipped PC to build CM7 from source
It does not provide any support beyond that operating system, so if you insist on using other
Linux distributions, either adapt the guide yourself or look elsewhere.
Moreover I'm not providing any support for any problems that might occur during the course
of this guide, if they are not introduced by faults within the guide itself. I will only
troubleshoot the activities that this guide is based upon and won't be able to help with your
general linux problems. Feedback however is greatly appreciated.
Reposting this on other forums:
Feel free to post this guide on other forums. I'd like to be given credit though. Thanks
I am new to this myself, but I thought I'd share my findings after successfully building my first kang.
News & changelog:
v0.92 2011/06/01 Fix:
Added "change directory" before init repository (thanks to peewster)
v0.91 2011/05/31 Fix:
Fixed PATH exports (thanks to bhanvadia)
v0.9 2011/05/31 Initial release:
Still much formatting to be done, typos possible. Leave me some feedback if you encounter them.
Alright, so you want to build your own CM7 KANG's ?
Step 0: The starting point + info
When you start this guide, I assume that you just installed your Ubuntu 11.04 copy to your PC and set up all the drivers to your hearts content.
All commands are supplied, as they would be typed in from a USER ACCOUNT, if you operate from the root account, you will
have to add /home/<yourusername> to the most commands. I suggest, after performing the actions required by root, that you log out by typing
Code:
exit
What you need:
A working copy of Cyanogenmod7 installed on your phone
A PC with Ubuntu 11.04 installed (NOTE: If you're about to install Ubuntu from scratch, use the 64Bit version.
I can build CM7 on a 32Bit OS just fine. But AOSP for example won't build beyond Froyo on 32Bit.
At least 20GB of free space (including space required for the operating system itself)
A considerably fast internet connection (syncing the repo takes everal Gbs)
At least 3 hours of time.
All done? Then let's get started:
Step 1: Install the Java JDK
Go to System → Administration → Synaptics Package Manager
Here, we have to enable the partner repositories.
Go to Settings → Repositories → Other Software → Tick Canonical Partners and hit Close
Now push the „Reload“ button, and use the Search button to find the sun-java6-jdk package
tick the box in front of it and choose „Mark for installation“ and accept the following dialogue.
Click the „Apply“ button. Accept the dialogues, you now have the Java JDK installed.
Step 2: Install the Android SDK
Go here and download this.
Extract the archive to a directory of your choice.
Open a Terminal, navigate to the „tools“ subfolder and run the AVD Manager using ./android
In the new Window hit „Available Packages“ tick the „Android Repository“ and select „Install selected“
Once thats done, close everything up, time for step 3.
Step 3: Set up udev
The description from the CyanogenMod wiki struck me as being a slightly bit overkill, and, while it might be necessary for other devices, for LG phones this works just fine:
Create a new file on your desktop named
Code:
99-android.rules
and fill them with the following content:
Code:
SUBSYSTEM=="usb", SYSFS{idVendor}=="1004", MODE="0666"
This will enable the debugging for LG devices, if you have time, it won#t hurt to add the other vendors. Just add another line
like above and replace the „1004“ with the appropriate vendor ID from http://developer.android.com/guide/developing/device.html (scroll to the bottom)
Log in as root using
Code:
sudo su
and paste our file to
Code:
/etc/udev/rules.d
using the terminal (cp)
Set permissions for the file using
Code:
chmod a+r /etc/udev/rules.d/99-android.rules
Now would probably be a good time to check if adb is working correctly.
But first, lets update the PATH so we can type „adb“ anywhere on the file system.
Navigate to your user home directory, press CTRL+H to show hidden files and edit the
Code:
.bashrc
file by adding the following
Code:
export PATH="/home/<yourusername>/<path to the android SDK >/platform-tools/:${PATH}"
export PATH="/home/<yourusername>/bin/:${PATH}"
(The 2nd line is necessary for later)
NOTE:This only enable the use of adb everywhere when logged in with your username. When working as root, you'll have
to add a separate line with /home/<yourusername> in front of the path above.
You have to log out and in again for the changes to take effect.
Now check if you can see your phone with
Code:
adb devices
Alright, still awake? Good, because now it gets interesting
Step 4: Install build packages and create directories
Since we already installed the JDK this command differs a bit from the Cyanogen Wiki:
For 32 and 64 Bit
Code:
sudo apt-get install git-core gnupg flex bison gperf libsdl1.2-dev libesd0-dev libwxgtk2.6-dev squashfs-tools build-essential zip curl libncurses5-dev zlib1g-dev pngcrush schedtool
For 64 Bit only
Code:
sudo apt-get install g++-multilib lib32z1-dev lib32ncurses5-dev lib32readline5-dev gcc-4.4-multilib g++-4.4-multilib
Now we need 2 directories
Code:
mkdir -p ~/bin
mkdir -p ~/android/system
Almost there ….
Step 5: Install the repository
Now we need our repo binary:
Code:
curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
chmod a+x ~/bin/repo
(credits to p.valenta for notifying me of the adress change)
NOTE: You may need to reboot now
Change to your previously created directory:
Code:
cd ~/android/system/
Initialize the repository:
Code:
repo init -u git://github.com/CyanogenMod/android.git -b gingerbread
Enter your Name, eMail adress and select if you want colors or not.
AND NOW THE FINALE
Code:
repo sync -j16
Get yourself a BIG coffee, because this is going to take MUCH MUCH time, because basically you are now checking out all there is to CyanogenMod.
But wait, we're not done yet. Hang on
Step 6: Getting proprietary files for the Optimus 2X
For this step, you need an O2X with a running Cyanogenmod build, so if you're still on stock, this is the time to flash Cyanogenmod for the first time.
Connect your phone to your PC via USB and
navigate to the device tree in your repo folder:
Code:
cd ~/android/system/device/lge/p990/
and run
Code:
./extract-files.sh
This will extract some libs from your device. But sadly, not all of them (build will still fail) but we will fix this now.
Go to
Code:
https://github.com/koush/proprietary_vendor_lge/tree/gingerbread/p990
and click the download button on the right.
Extract the „p990“ folder located in the subfolder
Code:
/koush-proprietary_vendor_lge-a43238f/
in the archive to
Code:
~/android/system/vendor/lge/
Step 7: Get latest ROMManager
I know I must be annoying the sh** out of you by now, but hang in there
Code:
~/android/system/vendor/cyanogen/get-rommanager
Step 8: BUILD F***ING EVERYTHING
Now this is what you've been waiting for huh?
Sync the repository again:
Code:
cd ~/android/system/
repo sync
Build the ROM
Code:
. build/envsetup.sh && brunch p990
Wait
When everything is finished, your KANG will be stored in
Code:
~/android/system/out/target/product/p990/
And THATS IT!
Congratulations, you have just built your own CM7 KANG, don't forget to share it to other nightly testers
Cheers aMpeX
Useful stuff and tools:
SH script by bhanvadia, tailored to the directories introduced by this tutorial:
Download here
Extract anywhere and make it executable by typing
Code:
chmod +x kang.sh
Create shortcut to the output directory of your KANGs
Type
Code:
ln -s ~/android/system/out/target/product/p990/ <your desired shortcut location>
nice guide, really liked it.
too bad there were none when I started making my kangs.
btw: I use mac it is bit different for mac. but nothing its missing.
Here is file you keep on you desktop to make it work without any typing of commands after you setup your computer working directory as per guide by aMpeX.
and check post #2 for making that file executable.....
kang.sh
bhanvadia said:
nice guide, really liked it.
too bad there were none when I started making my kangs.
btw: I use mac it is bit different for mac. but nothing its missing.
add "~/android/bin/" to path too so you can "repo sync" from anywhere.
just a suggestion... can upload build.sh file on here to make it easy.
something like
1. for clean and build
2. for repo sync
open file and press your options.
thats what I use...
Click to expand...
Click to collapse
That's why the guide states its for ubuntu. I found that even the Cyanogenmod Wiki entries don't work completely for the latest ubuntu (with g++ and gcc 4.3 not being available anymore, also hat huge problems with the java jdk at first)
I'll add the additional PATH variables as you suggested. Thank you.
aMpeX said:
That's why the guide states its for ubuntu. I found that even the Cyanogenmod Wiki entries don't work completely for the latest ubuntu (with g++ and gcc 4.3 not being available anymore, also hat huge problems with the java jdk at first)
I'll add the additional PATH variables as you suggested. Thank you.
Click to expand...
Click to collapse
Here is file you keep on you desktop to make it work without any typing of commands after you setup your computer working directory as per guide by aMpeX.
PS: aMpeX can you just test that file??? just repo sync or rom manager update options.
awesome guide !!! thanks aMpeX !
seems to be working, after you chmod+x the sh file that is. My Repo Sync is stuck at 1%, but I doubt its related to your file.
I'll add it to the 2nd post
aMpeX said:
seems to be working, after you chmod+x the sh file that is. My Repo Sync is stuck at 1%, but I doubt its related to your file.
I'll add it to the 2nd post
Click to expand...
Click to collapse
modified my mac file i use to fit to your setup of directories, just changed directories. ...
yeah then it would work, hope it make it more easy
GET the KANGs flowing...........
aMpeX said:
Useful stuff and tools:
SH script by bhanvadia, tailored to the directories introduced by this tutorial:
Download here
Extract anywhere and make it executable by typing
Code:
chmod +x kang.sh
Create shortcut to the output directory of your KANGs
Type
Code:
ln -s ~/android/system/out/target/product/p990/
Click to expand...
Click to collapse
Download link is sending to wrong post still....
now it should work like this....
http://forum.xda-developers.com/showpost.php?p=14310172&postcount=5
copy
http://forum.xda-developers.com/showpost.php?p=14310172&postcount=5
Can you please also state that it only works on 64bit builds of ubuntu and not 32bit...
Renegade_Rulez said:
Can you please also state that it only works on 64bit builds of ubuntu and not 32bit...
Click to expand...
Click to collapse
Aside from what you can read on the net, my KANGs build perfectly fine on Ubuntu 32Bit
No reason to not install 64Bit though. I'll add a remark in the first post.
Edit: After some asking and digging, read this:
http://twitter.com/#!/CM_arcee/status/75677847712309249
So while standard Gingerbread cannot be built by 32Bit, the CyanogenMod7 repository can.
is this meant to download a lot of stuff for different phones? mine is downloading a lot of stuff at step 5 and it's taking forever..
Imperticus said:
is this meant to download a lot of stuff for different phones? mine is downloading a lot of stuff at step 5 and it's taking forever..
Click to expand...
Click to collapse
It will download files for each and every phones supported by CyanogenMod, thats why its called cyanogen repo, not just P990 repo, but mostly you will use stuff thats required by your phone.
and its suggested to have 15 - 20 GB free, as it takes a lot....
3.5 GB is just "out" folder when it compiles for one device (P990)......
bit of a noob.. done everything..when I try to make the build using build/envsetup.sh i get permission denied
Any help please?
copy/paste the command from the tutorial
there is a leading dot and space before "build
Code:
. build/envsetup,sh && brunch p990
Thank's for the tutorial but i allways get no gsm function build
logcat -b radio
RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING error: com.android.internal.telephony.CommandException: RADIO_NOT_AVAILABLE
Click to expand...
Click to collapse
or
Couldn't find 'rild' socket; retrying after timeout
Click to expand...
Click to collapse
What baseband are you using? Make sure that the lge-ril.so is in your proprietary files
aMpeX said:
What baseband are you using? Make sure that the lge-ril.so is in your proprietary files
Click to expand...
Click to collapse
Thank's for repy.
lge-ril.so is in and generally i flash my build coming from cyano #31 (405) and mcr18 (405)
So...405
Possibly (if you synced the proprietary repository by koush AFTER you ran extract-files.sh) your ROM still includes the lge-ril for 0218.
Try reflashing the ril with the methods provided in this forum.
Other than that, I have no idea what might be causing your problems.
old ril file from koush files do work on 405 baseband too, but you feel better performance with new ril. with old ril you may loose signals sometime.
delete your vendor/lge/p990 folder, and download again from koush's files and put it back there. make sure your directories are in order
example: for lib-ril.so in as below
like ~/android/system/vendor/lge/p990/proprietery/lib/
So here's what i have been tinkering and i might share it as well here..
so its basically a back port of MTP support from the latest Ubuntu releases..you just have to update the GVFS(GNOME virtual file-system) of the Ubuntu Precise Version so it can recognize and mount the Nexus 4..so far its been good and stable for me..i am using a 32bit installation..
so here's what you just have to do..
Add the backport repository for MTP support in GVFS.
Code:
sudo add-apt-repository ppa:langdalepl/gvfs-mtp
then
Code:
sudo apt-get update
you will see stuff getting queued from ubuntu servers and other repositories
Then, upgrade the system, you should see many GVFS packages in the list.
Code:
sudo apt-get upgrade
you will be prompted that the GVFS will be updated with a new one..just proceed and wait for the update to Finish
And then, reboot via sudo command on the terminal or manually and you’re done! Plug your Nexus 4 and see it poppin!
**if ever this has been posted kindly delete the thread MODS..TIA!!
Thank you....
--=={BSnapp}==--
Guide: How To Build AOSP 4.4.3 From Source With Linux Mint 16 - Nexus 5 KTU84M
Important Note: Do not use Linux Mint 16 KDE to do this guide. Removing the old Java will seriously mess up your desktop and programs menu. This guide has been tested with Linux Mint 16 Cinnamon and Linux Mint 16 Mate.
Link to PA Gapps: http://forum.xda-developers.com/showthread.php?t=2397942
Link To SuperSu: http://download.chainfire.eu/supersu
Link to zip of completely unaltered build of AOSP 4.4.3. https://drive.google.com/file/d/0ByOOg6Qw8gHZMXBWVDRyVmVuRWc/edit?usp=sharing
I started this guide as I could not find a step by step detailed guide to build a stock AOSP from source with Linux Mint 16.
All the steps should work in Ubuntu but I haven't tried so not 100% sure of that.
All this assumes your phone is already unlocked.
Here goes:
Important note: Anything that is bolded text other then section titles are command line entries that are done in Terminal in Linux Mint. I thought it would be simpler to do it this way then say 'in Terminal' for every entry.
First we need to remove Icedtea Java or OpenJDK.
In Terminal: sudo apt-get purge openjdk-\* icedtea-\* icedtea6-\*
Then in Terminal: sudo add-apt-repository ppa:webupd8team/java
Next: sudo apt-get update && sudo apt-get install oracle-java6-installer
Be sure to accept the licence agreement to install java when it prompts you.
Next: sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl zlib1g-dev zlib1g-dev:i386 libc6-dev lib32ncurses5-dev ia32-libs x11proto-core-dev libx11-dev:i386 libreadline6-dev:i386 lib32z-dev libgl1-mesa-glx:i386 libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown libxml2-utils xsltproc readline-common libreadline6-dev libreadline6 lib32readline-gplv2-dev libncurses5-dev lib32readline5 lib32readline6 libreadline-dev libreadline6-dev:i386 libreadline6:i386 bzip2 libbz2-dev libbz2-1.0 libghc-bzlib-dev lib32bz2-dev libsdl1.2-dev libesd0-dev squashfs-tools pngcrush schedtool libwxgtk2.8-dev python
Follow this with: sudo apt-get install -f
This should fix any dependency errors.
Now: sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
Next download the SDK Tools For Linux x64 from this link. https://developer.android.com/sdk/index.html
Then: cd ~/Downloads
And: tar -xvf android-sdk_r22.6.2-linux.tgz
or tab the latest 'android-sdk_xxx.tgz file it they update it and it is a newer version then the one I downloaded to do this.
You can rename the android.sdk_xxx.tgz folder you extracted to SDK.
Then: cd ~/Downloads/SDK/tools
Next: ./android sdk
It will show you the tools that can be installed, just install the highest version API of 'Platform Tools' and 'Tools' for the latest android version '4.4.x' it shows.
Make sure you install the repo tool, in Terminal: mkdir ~/bin
Then: curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
And: curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
Now: sudo chmod a+x ~/bin/repo
Now sudo nano ~/.bashrc
Add this to the bottom of the text: export PATH=~/bin:$PATH
Then hit Ctrl-O and enter, it should say it saved the file followed by Ctrl-X to exit.
Then restart bash: source ~/.bashrc
Now lets Initialize the Repository for GIT configuration
First : git config --global user.name {Your Name}
Then: git config --global user.email {[email protected]}
If you have not registered with the GitHub website just doing these two steps works fine.
If you have registered with the GitHub website create a file called .netrc in your home directory, add your GitHub password to it with no spaces on the first line and change the permissions to '600' or you will have to continually authenticate when building the source.
In Terminal:nano ~/.netrc
Then add just your GitHub password (like I said you only need to do this if you have registered with GitHub).
Then 'Ctrl-O' and enter and it'll say it saved it, then 'Ctrl-X' to exit nano.
And: chmod 0600 ~/.netrc
Now: mkdir ~/AOSP
Then: cd ~/AOSP
Now you get the source code etc: repo init -u https://android.googlesource.com/platform/manifest -b android-4.4.3_r1.1
Followed by: repo sync -j12
Use repo sync -j12 for a quad core CPU or Intel I5 or if you have say an quad core I7 with 8 threads you can use repo sync -j24 to speed things up etc.
I have a I7 3930k with 12 threads so I used repo sync -j36. This gives you three threads per logical CPU and speeds things along quite well.
It may take several hours for the sync to finish.
After the sync finishes go to https://developers.google.com/android/nexus/drivers#hammerheadktu84m and download the KTU84Mdrivers (binaries) for the Nexus 5.
If you have closed the Terminal after the sync remember to first do this when you reopen it: cd ~/AOSP
when you open Terminal again before doing the cp and tar commands.
In Terminal: cp ~/Downloads/broadcom-hammerhead-ktu84m-175c1204.tgz ~/AOSP
Then: cp ~/Downloads/lge-hammerhead-ktu84m-716c9c42.tgz ~/AOSP
And: cp ~/Downloads/qcom-hammerhead-ktu84m-06019566.tgz ~/AOSP
In Terminal: tar -xvf broadcom-hammerhead-ktu84m-175c1204.tgz
And: tar -xvf lge-hammerhead-ktu84m-716c9c42.tgz
then: tar -xvf qcom-hammerhead-ktu84m-06019566.tgz
They should be the file names of the binaries for KTU84M that you are extracting but if for any reason the file names are different use the Tab key and tab the correct names in after 'tar -xvf'.
If the names ARE different I'd really check to make sure you downloaded the correct hammerhead binaries.
Now also in Terminal: ./extract-broadcom-hammerhead.sh
Then: ./extract-lge-hammerhead.sh
And: ./extract-qcom-hammerhead.sh
Hint: It will show you a really long licence agreement for each binary that you scroll by hitting the Enter key that takes forever to scroll one line at a time, it has 8 sections and several subsections. Hold the Enter key until you just get past Part 8, section D of the licence and stop there. Now hit enter a few more time one key stroke at a time until you finish Part 8 section E and see the 'Type 'I ACCEPT' to agree to the licence.' and type I ACCEPT If you just scroll by holding the Enter key all the way to the bottom of the licence you'll get an error you never accepted the licence. Then close Terminal.
Building the Sources
Now open Terminal: cd ~/AOSP
Then: . ./build/envsetup.sh
Now to select the type of device we give the following command: lunch
Choose: 9. aosp_hammerhead-userdebug
by entering '9' or whatever number aosp_hammerhead is after your enter the 'lunch' command (it was number 9 on mine).
Now: make -j12 for a quad core cpu or I5 or make -j24 for an I7 etc.
With your phone connected to your USB cable and the PC: adb root
Then: adb reboot bootloader
And: cd out/target/product/hammerhead
Lastly: fastboot -w flashall
If you get an error on the 'adb' and 'fastboot' commands do these first:
sudo apt-get install android-tools-adb
And: sudo apt-get install android-tools-fastboot
If you get an error when you fastboot -w flashall to do with a '-p' flag needed or 'android-info.txt' is missing it means you forgot to to the 'lunch' command before building the source. Go back to the 'Building The Sources' section.
If you already have a custom recovery installed like TWRP and would rather build a zip file to install with the recovery rather Then flash it in adb instead of make -j12 do: make -j12 otapackage
In the /home/"yourusername"/AOSP/out/target/product/hammerhead you have an aosp_hammerhead-ota-eng.___.zip file to flash in your custom recovery.
You will need to wipe/reset data in recovery before flashing it and re-install all your apps etc.
Installing Custom Recovery, Rooting and Google Apps
If you want to install a custom recovery download TWRP http://techerrata.com/browse/twrp2/hammerhead
Rename the file in Downloads to recovery.img
Then in Terminal with your phone connected by USB to your PC: adb root
And: adb reboot bootloader
Then: cd ~/Downloads
And: fastboot flash recovery recovery.img
Use the volume buttons on your phone to scroll onto "Restart Bootloader" and hit the powerbutton to select it. After the bootloader reloads, use the volume buttons to scroll to "Recovery Mode" and hit power button again to select it. You should then be in your custom recovery.
If for any reason you get a red android and no recovery just boot into fastboot mode again and reinstall the recovery.img.
And finally, to root your phone download SuperSu http://download.chainfire.eu/supersu and install the supersu.zip in recovery mode.
Download PA GAPPS from here http://forum.xda-developers.com/showthread.php?t=2397942 if you want the zip to install Google Apps in recovery.
You now have your own rooted vanilla AOSP you compiled yourself, congrats!
P.S. Very likely a good idea wipe/reset data in recovery and start with a clean install, you'll need to install all your programs and stuff anyways I'm sure.
P.P.S. I also installed the Xposed Framwork apk from this link http://forum.xda-developers.com/xposed/framework-xposed-rom-modding-modifying-t1574401/post24267797 so I could install the Advanced Reboot Menu and some other useful mods.
Hi man great tutorial.
I followed your tutorial exactly and it compiles very good and everything works great with flashing it to device to.
I start the rom and everything is working but then if i reboot i get wrong date and time for 20sec and it goes back to current time and date.
but i get like 10 notifications from all my google apps and it very anoying. and google now dont work till it gets synced.
i thougt it was my build that had issues but i flashed your rom that you had compiled and it has the same issues.
Did y have that issue?
bariz143 said:
Hi man great tutorial.
I followed your tutorial exactly and it compiles very good and everything works great with flashing it to device to.
I start the rom and everything is working but then if i reboot i get wrong date and time for 20sec and it goes back to current time and date.
but i get like 10 notifications from all my google apps and it very anoying. and google now dont work till it gets synced.
i thougt it was my build that had issues but i flashed your rom that you had compiled and it has the same issues.
Did y have that issue?
Click to expand...
Click to collapse
No, I've never had that issue. Did you wipe/reset data in recovery. If you never you need to do that. If you did I would try and do it again, it might fix the issue. You'll have to re-install all your apps etc. when you do though.
Also you can try to flash the zip I have to download in the OP, it is a completely unaltered stock AOSP build. DO wipe/reset in recovery before you do and you'll have to install the recovery in the guide to flash the zip.
https://docs.google.com/file/d/0ByOOg6Qw8gHZZjZXTmRXU05Ed1E/edit
If you want to install a custom recovery download TWRP http://techerrata.com/browse/twrp2/hammerhead
Rename the file in Downloads to recovery.img
Then in Terminal with your phone connected by USB to your PC: adb root
And: adb reboot bootloader
Then: cd ~/Downloads
And: fastboot flash recovery recovery.img
Use the volume buttons on your phone to scroll onto "Restart Bootloader" and hit the powerbutton to select it. After the bootloader reloads, use the volume buttons to scroll to "Recovery Mode" and hit power button again to select it. You should then be in your custom recovery.
If for any reason you get a red android and no recovery just boot into fastboot mode again and reinstall the recovery.img.
Edit: Sorry, just now saw you flashed my ROM. The wipe data should fix it though.
KedarWolf said:
No, I've never had that issue. Did you wipe/reset data in recovery. If you never you need to do that. If you did I would try and do it again, it might fix the issue. You'll have to re-install all your apps etc. when you do though.
Also you can try to flash the zip I have to download in the OP, it is a completely unaltered stock AOSP build. DO wipe/reset in recovery before you do and you'll have to install the recovery in the guide to flash the zip.
https://docs.google.com/file/d/0ByOOg6Qw8gHZZjZXTmRXU05Ed1E/edit
If you want to install a custom recovery download TWRP http://techerrata.com/browse/twrp2/hammerhead
Rename the file in Downloads to recovery.img
Then in Terminal with your phone connected by USB to your PC: adb root
And: adb reboot bootloader
Then: cd ~/Downloads
And: fastboot flash recovery recovery.img
Use the volume buttons on your phone to scroll onto "Restart Bootloader" and hit the powerbutton to select it. After the bootloader reloads, use the volume buttons to scroll to "Recovery Mode" and hit power button again to select it. You should then be in your custom recovery.
If for any reason you get a red android and no recovery just boot into fastboot mode again and reinstall the recovery.img.
Edit: Sorry, just now saw you flashed my ROM. The wipe data should fix it though.
Click to expand...
Click to collapse
Of course i wiped before flashing. The thing is it works on first boot. time and everything no notifications from google apps but as soon as i reboot time and date resets and i get 10 notifications from my google apps sayin time and date error and syncing problem.
I decided to make a clean repo sync again by removing everything and start from the begining. Let ypu know how it goes.
bariz143 said:
Of course i wiped before flashing. The thing is it works on first boot. time and everything no notifications from google apps but as soon as i reboot time and date resets and i get 10 notifications from my google apps sayin time and date error and syncing problem.
I decided to make a clean repo sync again by removing everything and start from the begining. Let ypu know how it goes.
Click to expand...
Click to collapse
I'd try wipe data again and I checked the Date/Time settings, I have 'Automatic date & time' and 'Automatic time zone' enabled. If it does it with my zip and your sync I doubt it is the build that is the trouble. You also might want to try disabling the auto time and date and setting it manually, it might be it is taking a minute to sync with your cell provider, hence the errors. Manually setting the auto time zone as well.
Also you might want to try a different Google Apps package from the link I provided. I use the micro one then if I have to add anything I just do it by Google Play.
Found this link, I'd try the flashable zip a few posts down or manually editing like one guy suggests.
http://forum.xda-developers.com/showthread.php?t=2580974
KedarWolf said:
I'd try wipe data again and I checked the Date/Time settings, I have 'Automatic date & time' and 'Automatic time zone' enabled. If it does it with my zip and your sync I doubt it is the build that is the trouble. You also might want to try disabling the auto time and date and setting it manually, it might be it is taking a minute to sync with your cell provider, hence the errors. Manually setting the auto time zone as well.
Also you might want to try a different Google Apps package from the link I provided. I use the micro one then if I have to add anything I just do it by Google Play.
Found this link, I'd try the flashable zip a few posts down or manually editing like one guy suggests.
http://forum.xda-developers.com/showthread.php?t=2580974
Click to expand...
Click to collapse
Thank you for that. But its just a patch to fix. How come its broken if it comes from google repo ? :S
i compiled CM11 and no time issues there.
This is a perfect guide. Thank you VERY much.
The Nexus 5 advocate (Team Inferno)
TheLastSidekick said:
This is a perfect guide. Thank you VERY much.
The Nexus 5 advocate (Team Inferno)
Click to expand...
Click to collapse
Have you the time issue there phone resets to year 1970 upon reboot?
Really nice great tutorial
bariz143 said:
Thank you for that. But its just a patch to fix. How come its broken if it comes from google repo ? :S
i compiled CM11 and no time issues there.
Click to expand...
Click to collapse
Not sure, I've had no trouble that way.
Guide Updated
bariz143 said:
Hi man great tutorial.
I followed your tutorial exactly and it compiles very good and everything works great with flashing it to device to.
I start the rom and everything is working but then if i reboot i get wrong date and time for 20sec and it goes back to current time and date.
but i get like 10 notifications from all my google apps and it very anoying. and google now dont work till it gets synced.
i thougt it was my build that had issues but i flashed your rom that you had compiled and it has the same issues.
Did y have that issue?
Click to expand...
Click to collapse
The guide has been updated to the KTV49L build which has several bug fixes from the old build. I'm not sure if the date issue has been fixed but if you want to try to build AOSP again just letting you know it is an option.
KedarWolf said:
The guide has been updated to the KTV49L build which has several bug fixes from the old build. I'm not sure if the date issue has been fixed but if you want to try to build AOSP again just letting you know it is an option.
Click to expand...
Click to collapse
Great news so if I followed your guide before the KVT update where do I start. Do I have to do all again from scratch?
KedarWolf said:
The guide has been updated to the KTV49L build which has several bug fixes from the old build. I'm not sure if the date issue has been fixed but if you want to try to build AOSP again just letting you know it is an option.
Click to expand...
Click to collapse
You need to delete your /home/yourusername/AOSP and /home/yourusername/bin folders you made.
So do: rm -rf ~/AOSP
And: rm -rf ~/bin
Then just:
Make sure you install the repo tool, in Terminal: mkdir ~/bin
Then: curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
And: curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
Now: sudo chmod a+x ~/bin/repo
Now: mkdir ~/AOSP
Then: cd ~/AOSP
Now you get the source code etc: repo init -u https://android.googlesource.com/platform/manifest -b android-4.4.2_r2
Followed by: repo sync -j12
Use repo sync -j12 for a quad core CPU or Intel I5 or if you have say an quad core I7 with 8 threads you can use repo sync -j24 to speed things up etc.
I have a I7 3930k with 12 threads so I used repo sync -j36. This gives you three threads per logical CPU and speeds things along quite well.
And the rest following that. You do not need to do the other steps though, but the recompiling and build you do so it takes some time.
KedarWolf said:
You need to delete your /home/yourusername/AOSP and /home/yourusername/bin folders you made.
So do: rm -rf ~/AOSP
And: rm -rf ~/bin
Then just:
Make sure you install the repo tool, in Terminal: mkdir ~/bin
Then: curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
And: curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
Now: sudo chmod a+x ~/bin/repo
Now: mkdir ~/AOSP
Then: cd ~/AOSP
Now you get the source code etc: repo init -u https://android.googlesource.com/platform/manifest -b android-4.4.2_r2
Followed by: repo sync -j12
Use repo sync -j12 for a quad core CPU or Intel I5 or if you have say an quad core I7 with 8 threads you can use repo sync -j24 to speed things up etc.
I have a I7 3930k with 12 threads so I used repo sync -j36. This gives you three threads per logical CPU and speeds things along quite well.
And the rest following that. You do not need to do the other steps though, but the recompiling and build you do so it takes some time.
Click to expand...
Click to collapse
Thanks alot my friend. Just did as you said. And i can see in settings that it KVT build but the time issue is still there. I dont get it at all.
im pissed.
its like building a car and the wipers don't work.
bariz143 said:
Thanks alot my friend. Just did as you said. And i can see in settings that it KVT build but the time issue is still there. I dont get it at all.
im pissed.
its like building a car and the wipers don't work.
Click to expand...
Click to collapse
Sorry, only fix I know is the patch in the link I provided earlier. I have read of other people with the AOSP build have that issue, it's in that link. I don't why it never affected me, might be the settings I use for Time/Date but I've had zero issues that way.
KedarWolf said:
Sorry, only fix I know is the patch in the link I provided earlier. I have read of other people with the AOSP build have that issue, it's in that link. I don't why it never affected me, might be the settings I use for Time/Date but I've had zero issues that way.
Click to expand...
Click to collapse
Yeah i would like to share the rom with friend and it would not be nice if the time resets and getting those notifications error all the time.
Thx alot
i've downloaded this(http://forum.xda-developers.com/showthread.php?t=2585828) build environment from xda so i can start building a rom for my phone and, if i'm not mistaken, i can start your tutorial from the github part right?
thanks
jv.batista said:
i've downloaded this(http://forum.xda-developers.com/showthread.php?t=2585828) build environment from xda so i can start building a rom for my phone and, if i'm not mistaken, i can start your tutorial from the github part right?
thanks
Click to expand...
Click to collapse
I'm not 100% sure t'll work in Xubuntu. I know when I removed the old java in Linux Mint KDE it really messed up the programs menu, even Terminal itself was removed from it. But if it doesn't mess anything up it should work I believe. or just install Linux Mint 16 Cinnamon or MATE in the virtual box instead of Xubuntu, then it'll work I'm sure. Might build much slower though running in a virtual box. You'd have to do everything from the start of the guide, the linux installed in a virtual box is just a clean fresh install of any linux just like a regular new install on any PC.
Hope that helps.
KedarWolf said:
I'm not 100% sure t'll work in Xubuntu. I know when I removed the old java in Linux Mint KDE it really messed up the programs menu, even Terminal itself was removed from it. But if it doesn't mess anything up it should work I believe. or just install Linux Mint 16 Cinnamon or MATE in the virtual box instead of Xubuntu, then it'll work I'm sure. Might build much slower though running in a virtual box. You'd have to do everything from the start of the guide, the linux installed in a virtual box is just a clean fresh install of any linux just like a regular new install on any PC.
Hope that helps.
Click to expand...
Click to collapse
when I had the galaxy s I tried to create a buildmachine but even following every step, there was always something missing, that's why i gave the vm sugestion.
i'll try with the vm but if it doesn't work i'll start from scratch...
thanks
ps: it's a virtual machine but it is running in a i7 with 4 cores and 8gb of ram dedicated to it(if needed i can go for 10gb)
jv.batista said:
when I had the galaxy s I tried to create a buildmachine but even following every step, there was always something missing, that's why i gave the vm sugestion.
i'll try with the vm but if it doesn't work i'll start from scratch...
thanks
ps: it's a virtual machine but it is running in a i7 with 4 cores and 8gb of ram dedicated to it(if needed i can go for 10gb)
Click to expand...
Click to collapse
By start from scratch I mean you just do all the steps in the guide on the fresh virtual machine install. The only time you don't need to do all the steps is if you've done a build and need to do a second build like I did for my Nexus 7 after my Nexus 5 or when the repos update to a new version after you've done a build already. In post #13 it says what to do if you're doing a second build. If it's your first build or a new install of linux or a new virtual box install of linux do all the steps right from the beginning of the guide. Hope that clarifies things.
P.S. Should be pretty fast with your virtual machine but it takes me close to an hour to download the source from the repo then another hour to actually build AOSP with a 6 core 12 thread I7 3930k and 32 gigs of ram.
P.P.S. Sorry for the late night responses, I get home from work around 11 p.m. EST and like to game and stuff a bit before I do other things. Really busy at work, not much time to check here very often.
I have seen many people asking how to install it without dual booting, so I'll make things a bit easier...
You need Ubuntu on your PC!
Warning:
I'm not responsible for anything that might ever happen to your device, you must know what you are doing!
This is a beta port and it have bugs
It'll wipe all your data
STEPS:
1. Install the ubuntu-device-flash package
open terminal (ctrl+alt+t) and type:
sudo add-apt-repository "deb http://us.archive.ubuntu.com/ubuntu/ saucy universe multiverse"
sudo add-apt-repository "deb http://us.archive.ubuntu.com/ubuntu/ saucy-updates universe multiverse"
2. Add phablet tools PPAs (not needed for 14.04)
sudo add-apt-repository ppahablet-team/tools
3. Install the ubuntu-device-flash package
sudo apt-get install ubuntu-device-flash
4. Install phablet-tools package
sudo apt-get install phablet-tools
5. NOW BACKUP YOUR PHONE AND SAVE IT IN A SAFE PLACE
6. Reboot into bootloader
7. Unlock bootloader (if it's already unlocked just ignore)
sudo fastboot oem unlock
8. Reboot and then go back to bootloader
9. Installation, type in terminal
ubuntu-device-flash --channel="ubuntu-touch/devel-proposed" --bootstrap --server="http://system-image.tasemnice.eu"
10. Don't touch anything, it'll boot into a cwm-based recovery but it's still runing the script, wait until it completely boots into system
And thats it, enjoy!
FYI, I changed the script to install the most recent version
CREDITS:
https://wiki.ubuntu.com/Touch/Devices
http://developer.ubuntu.com/start/ubuntu-for-devices/installing-ubuntu-for-devices/
Greetings from Brazil
Reserved
You can always change the channel in the script as your preference. Now, the last version is the Vivid Vervet, channel /vivid-proposed
Known issues?
does it work? make calls? texts? lte data?
Everything is on the link in the credits, the only known bugs are the bluetooth that doesn't work and power management. The g+ forum is here: https://plus.google.com/communities/107225355463332672169
It works great (except bluetooth) :good:
Does this work with lollipop bootloader?
shane582 said:
Does this work with lollipop bootloader?
Click to expand...
Click to collapse
It's the same thing
Sent from my Nexus 5 using XDA Free mobile app
Thanks for the list! Will do this laster this day, because right now I´m running dualboot and it´s a pain in the as...
Do you guys know of a good way to use whatsapp on ubuntu? I looked and only found old stuff...
Threema would also be nice
4I-I said:
Do you guys know of a good way to use whatsapp on ubuntu? I looked and only found old stuff...
Threema would also be nice
Click to expand...
Click to collapse
There used to be a third-party app called whosthere, but I think it's not supported anymore, considering that they're banning users for using third-party apps
slayer of worlds said:
There used to be a third-party app called whosthere, but I think it's not supported anymore, considering that they're banning users for using third-party apps
Click to expand...
Click to collapse
Oh i didnt know that! Why are they doing that? Sounds Kind of stupid....
But i guess ill have to wait untill whatsapp is available for ubuntu or ppl are using cooler apps...
slayer of worlds said:
I have seen many people asking how to install it without dual booting, so I'll make things a bit easier...
You need Ubuntu on your PC!
Warning:
I'm not responsible for anything that might ever happen to your device, you must know what you are doing!
This is a beta port and it have bugs
It'll wipe all your data
STEPS:
1. Install the ubuntu-device-flash package
open terminal (ctrl+alt+t) and type:
sudo add-apt-repository "deb http://us.archive.ubuntu.com/ubuntu/ saucy universe multiverse"
sudo add-apt-repository "deb http://us.archive.ubuntu.com/ubuntu/ saucy-updates universe multiverse"
2. Add phablet tools PPAs (not needed for 14.04)
sudo add-apt-repository ppahablet-team/tools
3. Install the ubuntu-device-flash package
sudo apt-get install ubuntu-device-flash
4. Install phablet-tools package
sudo apt-get install phablet-tools
5. NOW BACKUP YOUR PHONE AND SAVE IT IN A SAFE PLACE
6. Reboot into bootloader
7. Unlock bootloader (if it's already unlocked just ignore)
sudo fastboot oem unlock
8. Reboot and then go back to bootloader
9. Installation, type in terminal
ubuntu-device-flash --channel="ubuntu-touch/devel-proposed" --bootstrap --server="http://system-image.tasemnice.eu"
10. Don't touch anything, it'll boot into a cwm-based recovery but it's still runing the script, wait until it completely boots into system
And thats it, enjoy!
FYI, I changed the script to install the most recent version
CREDITS:
https://wiki.ubuntu.com/Touch/Devices
http://developer.ubuntu.com/start/ubuntu-for-devices/installing-ubuntu-for-devices/
Greetings from Brazil
Click to expand...
Click to collapse
Hey, is this for every Android device?
Sent from my GT-S7580 using XDA Free mobile app
SlimShady08 said:
Hey, is this for every Android device?
Sent from my GT-S7580 using XDA Free mobile app
Click to expand...
Click to collapse
No. I gave instructions for nexus 5. You have to see if your device is compatible at ubuntu site and follow its instructions if so.