[Q] Galaxy pop not starting - Samsung Galaxy Mini

Hi all,
I have read the forum for my problem but cant find a solution:
Last Night I click on Wipe Data/Reset,After that I am unable to start my Phone ,It is stucking on boot screen,I have also tried to flash a new rom but still no resolution,Please Help me.Its urgent

There must have been wrong you have done while flashing the rom...
Try flashing stock ROM via odin.

thanks
Nabs Zains said:
There must have been wrong you have done while flashing the rom...
Try flashing stock ROM via odin.
Click to expand...
Click to collapse
Thanks for your quick response.Actually I didnt wipe data after flashing ROM, Now i have done it & Resolved the problem.Actually i didnt find a full tut about resolving the problem.

Related

[Q] Problem WITH CM7 V5.3 by squazone HELP NEEDED

I WAS USING CM7 5.2 by squazo...BUT Today when I reflashed it to cm7 v5.3 it was ok at the beginning but after sometimes it starter restarting up-to the boot animation of cm7
The phone wont start it just keeps on restarting it self on the animation-- again and again and again ..
What should I do to fix this Please anyone how knows help me
wipe data / factory reset
wipe data and reflash the rom and then wipe data again
nake sure you flash all package in order the rom first and the system app update.zip
guys where can i get a multiple-files firmware? cos i have the same problem. and i only has then one package firmware. please guys need it badly
same problem after flashing to c7.3 by squadzone
i need to reflash my firmware. need help
ahmish said:
guys where can i get a multiple-files firmware? cos i have the same problem. and i only has then one package firmware. please guys need it badly
same problem after flashing to c7.3 by squadzone
i need to reflash my firmware. need help
Click to expand...
Click to collapse
http://www.mediafire.com/?br3r8fod5g3vud4
IF I HELPED YOU BE SURE TO CLICK THAT THANKS BUTTON

[Q] Bootloop after Dalvik wipe and accidental reboot

Hi,
I have SlimICS 4.2 rom installed, and was working flawlessly. I wanted to flash Semaphore 1.3.0s kernel to try it, so I went into recovery to flash it.
I wiped Dalvik cache, but when I was going to wipe cache and flash, I accidentally rebooted the phone. Now it is stuck in a bootloop, and I can´t access recovery. I am able to enter Download Mode.
How can I fix it? I´m quite a noob at flashing, so a step-by-step guide would help me to avoid future mistakes.
Thanks in advance
pollopava said:
Hi,
I have SlimICS 4.2 rom installed, and was working flawlessly. I wanted to flash Semaphore 1.3.0s kernel to try it, so I went into recovery to flash it.
I wiped Dalvik cache, but when I was going to wipe cache and flash, I accidentally rebooted the phone. Now it is stuck in a bootloop, and I can´t access recovery. I am able to enter Download Mode.
How can I fix it? I´m quite a noob at flashing, so a step-by-step guide would help me to avoid future mistakes.
Thanks in advance
Click to expand...
Click to collapse
do you know how to use odin?
i cant post links here if u can pm me i will give you the link
nayantha said:
do you know how to use odin?
i cant post links here if u can pm me i will give you the link
Click to expand...
Click to collapse
Thanks Nayantha
I used Odin to flash Darky 10.1 some time ago, but I followed a step-by-step guide and I really don´t know what each step does. From what I´ve found in the forum, a solution would be to flash the kernel or a full rom via Odin, but I´m afraid of making it worse because I don´t know what I am doing. That´s why I´m hoping for a step-by-step guide.
i also had the same issue
so i flashed stock gb using odin
and root it
then flashed ICS333-2.0.1 rom
after that i flashed jb rom
problem fixed
i cant post my friends link here coz im new pm me i can solve
ODIN stuck
Hi
I tried flashing the semaphore kernel through Odin but it is stuck in "Setup connection". I want to restart everything and try again, but I´m afraid something worse will happen if I disconnect the phone now. ¿Is it safe to unplug it?
Thanks!
pollopava said:
Hi
I tried flashing the semaphore kernel through Odin but it is stuck in "Setup connection". I want to restart everything and try again, but I´m afraid something worse will happen if I disconnect the phone now. ¿Is it safe to unplug it?
Thanks!
Click to expand...
Click to collapse
I answer myself: I disconnected the phone and I got the dreaded exclamation sign. No fear, removed the battery and plugged it again. Back to download mode, connected it to the same port but this time using Odin 1.7, and worked perfectly!
Thanks for your support!
pollopava said:
I answer myself: I disconnected the phone and I got the dreaded exclamation sign. No fear, removed the battery and plugged it again. Back to download mode, connected it to the same port but this time using Odin 1.7, and worked perfectly!
Thanks for your support!
Click to expand...
Click to collapse
it calls software brick. can recover from it. i messaged you regarding your issue how to securely flash jb from beginning.

[Q] Galaxy Note logo brick

Hi guys :laugh: i'm new here... and i have a big problem: my galaxy note stays bricked on the initial logo (Samsung galaxy n7000) ..... i tried to flash with odin a stock gingerbread rom but it stucks at factory.fs
i tried to to flash it with cmw but it still stucks at the initial logo
i ve tried everything...... can you please help me?
p.s i can still enter in download mode odin
I think if u can search a thread where dr ketan has given expert advice
Also if u cud post how did u brick ur phone it will help experts in solving ur prblm
Edit see this http://forum.xda-developers.com/showthread.php?t=1912417
Sent from my GT-N7000 using xda premium
razorgtr14 said:
Hi guys :laugh: i'm new here... and i have a big problem: my galaxy note stays bricked on the initial logo (Samsung galaxy n7000) ..... i tried to flash with odin a stock gingerbread rom but it stucks at factory.fs
i tried to to flash it with cmw but it still stucks at the initial logo
i ve tried everything...... can you please help me?
p.s i can still enter in download mode odin
Click to expand...
Click to collapse
yeah ... as sitanshu91 asked,,,
u need to let us know what u did before it got stuck at the LOGO ?
razorgtr14 said:
Hi guys :laugh: i'm new here... and i have a big problem: my galaxy note stays bricked on the initial logo (Samsung galaxy n7000) ..... i tried to flash with odin a stock gingerbread rom but it stucks at factory.fs
i tried to to flash it with cmw but it still stucks at the initial logo
i ve tried everything...... can you please help me?
p.s i can still enter in download mode odin
Click to expand...
Click to collapse
Hi there, did you try to flash on an unsafe kernel? Please read the numerous posts on Safe / Unsafe kernels, then consult Chasmodo's excellent Kernel Repository.
Before flashing a ROM, I would suggest you download the Abyss 4.2 kernel (tar file), you can search and find this on XDA.
Connect your Note to Odin and flash the Abyss 4.2 tar file. This will install a safe (Gingerbread) kernel. Again there are posts on how to do this.
Enter Recovery and flash your ROM of choice.
Remember to ALWAYS flash on a safe kernel. If you are not sure, please check.
I hope this helps. Please hit THANKS if it did.
Thanks for posting you all,
I was flashing a new rom with cwm and suddently appeared an error: E: can't...
I took off the battery and put it again and reboot it again...
And so it stucked at the initial logo.
P.S: i had a cooked rom before that happened
razorgtr14 said:
Thanks for posting you all,
I was flashing a new rom with cwm and suddently appeared an error: E: can't...
I took off the battery and put it again and reboot it again...
And so it stucked at the initial logo.
P.S: i had a cooked rom before that happened
Click to expand...
Click to collapse
But, what new ROM were you flashing and what were you on prior? You have to explain yourself better. Did you do a factory reset/wipe data on a PURELY STOCK ROM or did you use philz kernel or a CM9/10 variant or something else?
razorgtr14 said:
Thanks for posting you all,
I was flashing a new rom with cwm and suddently appeared an error: E: can't...
I took off the battery and put it again and reboot it again...
And so it stucked at the initial logo.
P.S: i had a cooked rom before that happened
Click to expand...
Click to collapse
Sounds to me as if you flashed from an unsafe kernel. You must ALWAYS check the kernel is safe before you flash.
I would recommend you flash a safe kernel (via Recovery or Odin - there are guides on both methods). Abyss 4.2 is my personal choice.
Then, when the kernel has been flashed, reboot back to Recovery before flashing a ROM. Do not got straight to ROM flash.
These steps should help.
thanks for your help but there s still a problem... if a flash a rom with odin it stucks at factory.fs..
i did everything and at last i used the adb program and i removed the old partition like factory.fs and created new one..... after that i converted them in ext4 by going in (cwm recovery) mounts and storage and check format /data and format /system...
after that i installed the cm 9 Nightlies and the phone worked again =D
so...after that.... i installed odin mobile pro and Odin Flash Kernel for GT-N7000 ...then i downloaded a stock rom ics (N7000XXLRG_N7000DBTLRG_DBT) and i flashed it with odin mobiel pro =)
everything was working fine until it stopped at installing or updating (i don't know) the new applications like kies,Smemo ecc.....
and now i don't know what to do...
Can you help me please? i don't want to throw away a galaxy note......
razorgtr14 said:
thanks for your help but there s still a problem... if a flash a rom with odin it stucks at factory.fs..
i did everything and at last i used the adb program and i removed the old partition like factory.fs and created new one..... after that i converted them in ext4 by going in (cwm recovery) mounts and storage and check format /data and format /system...
after that i installed the cm 9 Nightlies and the phone worked again =D
so...after that.... i installed odin mobile pro and Odin Flash Kernel for GT-N7000 ...then i downloaded a stock rom ics (N7000XXLRG_N7000DBTLRG_DBT) and i flashed it with odin mobiel pro =)
everything was working fine until it stopped at installing or updating (i don't know) the new applications like kies,Smemo ecc.....
and now i don't know what to do...
Can you help me please? i don't want to throw away a galaxy note......
Click to expand...
Click to collapse
Flash back to cm base. If you have damaged emmc its likely you won't be able to run stock roms anymore because of the damaged space. ie. Stock rom 600-800mb, cm based 150mb
Sent from my GT-N7000 using xda premium
Thanks for your replay....
uau...so i can't use stock roms anymore.... but i can still flash other cooked roms like crash rom or king rom?
razorgtr14 said:
Thanks for your replay....
uau...so i can't use stock roms anymore.... but i can still flash other cooked roms like crash rom or king rom?
Click to expand...
Click to collapse
He is saying you can use any CM based ROM. Crash and such are still based on stock Samsung and pretty big in size. Maybe try something like SlimBean.

[Q] Help !!!

Hello
I Flashed a rom on my galaxy s and it started bootloop , so i tried flashing a stock firmware downloaded from samfirmware but it still has the same problem , it wont start and goes on bootloop ! after flashing the stock rom it went into the recovery and there were some errors there like cant mount system etc.
What should i do now ? Please Help :|
Thanks in advance
xp3rto said:
Hello
I Flashed a rom on my galaxy s and it started bootloop , so i tried flashing a stock firmware downloaded from samfirmware but it still has the same problem , it wont start and goes on bootloop ! after flashing the stock rom it went into the recovery and there were some errors there like cant mount system etc.
What should i do now ? Please Help :|
Thanks in advance
Click to expand...
Click to collapse
This is for S plus but it shall work for you too: http://forum.xda-developers.com/showthread.php?t=1660596.
xp3rto said:
Hello
I Flashed a rom on my galaxy s and it started bootloop , so i tried flashing a stock firmware downloaded from samfirmware but it still has the same problem , it wont start and goes on bootloop ! after flashing the stock rom it went into the recovery and there were some errors there like cant mount system etc.
What should i do now ? Please Help :|
Thanks in advance
Click to expand...
Click to collapse
You Must Install Stock ROM ( 3 Files ) and when you install 3 files ROM , Every things Should be Ok.
xp3rto said:
Hello
I Flashed a rom on my galaxy s and it started bootloop , so i tried flashing a stock firmware downloaded from samfirmware but it still has the same problem , it wont start and goes on bootloop ! after flashing the stock rom it went into the recovery and there were some errors there like cant mount system etc.
What should i do now ? Please Help :|
Thanks in advance
Click to expand...
Click to collapse
Hey there,
Did you flash an ICS/JB rom first before trying to return to stock?
If you did, no worries, it can be easily fixed
I think what you're missing is a file called dbsdata.rfs.tar (I'm not quite sure where to find a link, will update if I see it)
Pretty much the data partition in ICS onwards is different to that of GB, and so therefore it'll cause your phone to bootloop if you have the incorrect data partition.
Download dbsdata.rfs.tar from somewhere and flash it in download mode through Odin.
Try that and please report back
(By the way, don't panic if it bootloops after installing a custom rom. Just take out the battery, go back into recovery and flash again.)
Sent from my GT-I9000

[Q] Kinda odd bootloop (help ASAP, pls)

Sooo, I got a problem with my Galaxy Mini 2.
First, I wanted to flash Cm11 (by TheWhisp), but something went wrong during flashing process, and my device bootlooped.
I tried to go into recovery, but it didn't work.
Than I thought it might be a good idea to flash stock ROM via odin. I did it once in the past, with a succesful outcomes, so I fought it will work again.
This ended with a bootloop, only change was the logo during boot process. Than I tried to flash recovery but it didn't change anything.
So my phone is in bootloop, stock ROM flashing doesn't help, and I can't run recovery.
Any ideas how can I fix it?
Do a search before posting
myrczu said:
Sooo, I got a problem with my Galaxy Mini 2.
First, I wanted to flash Cm11 (by TheWhisp), but something went wrong during flashing process, and my device bootlooped.
I tried to go into recovery, but it didn't work.
Than I thought it might be a good idea to flash stock ROM via odin. I did it once in the past, with a succesful outcomes, so I fought it will work again.
This ended with a bootloop, only change was the logo during boot process. Than I tried to flash recovery but it didn't change anything.
So my phone is in bootloop, stock ROM flashing doesn't help, and I can't run recovery.
Any ideas how can I fix it?
Click to expand...
Click to collapse
You forgot to wipe data and now you got bootloop !
Find yourself a solution by read threads from here <click>
Or go here for solution !
Same issue here and ill the upper link to resolved the problem.Thanks for the link
Wonderful
Lodaserves said:
...Thanks for the link
Click to expand...
Click to collapse
Thanks button? :laugh:
Ok i will dont worry =)

Categories

Resources