Related
my P990 is not in emergency mode
I turn off my phone I remove the battery preciono vol - and plug the USB into the computer and does not go into recovery mode lg logo goes quickly and restarts again and again
HELP!!
victor__trejo said:
my P990 is not in emergency mode
I turn off my phone I remove the battery preciono vol - and plug the USB into the computer and does not go into recovery mode lg logo goes quickly and restarts again and again
HELP!!
Click to expand...
Click to collapse
What exactly do u wanna do flash stock or what
Sent from my LG-P990 using xda app-developers app
s
bliizzz said:
What exactly do u wanna do flash stock or what
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
install a rom or whatever work had installed MIUI 2.3, perhaps the same rom vuelba thing is to try putting on the update of ics of SU660 SmartFlash right through and now enters the cell enters recovery or not
want to go into emergency mode to install an original rom and then install a custom rom, but does not go into emergency mode
http://forum.xda-developers.com/showthread.php?t=1715272
to enter into nvflash mode remove the battery,
then hold both vol up and down and immediately plugin the usb while holding(MAIN USB PORT)
the lg logo will appear and then the screen will go black. on your windows pc it will prompt for apx drivers, manually install drivers and then follow the above
---------- Post added at 11:16 PM ---------- Previous post was at 11:13 PM ----------
http://forum.xda-developers.com/showthread.php?t=1229407
even this works
maybe because vol - does nothing.
to enter your "emergency", officlal called APX mode, press VOL UP, then it will work (with/without battery - depending on phone).
Rayman96 said:
maybe because vol - does nothing.
to enter your "emergency", officlal called APX mode, press VOL UP, then it will work (with/without battery - depending on phone).
Click to expand...
Click to collapse
Eh?
Vol-DOWN + plugin = Smartflash.
BOTH Volume buttons + plugin = APX.
Vol-UP + plugin = nothing.
does not work any of your recommendations if you simply crush vol - and plug the cel to the compu only restarts my cel. if crushed vol + / vol - simultaneously and connect my phone rings in the compu as it turns reconose but not P990 screen and flash Smarth neither detected
victor__trejo said:
does not work any of your recommendations if you simply crush vol - and plug the cel to the compu only restarts my cel. if crushed vol + / vol - simultaneously and connect my phone rings in the compu as it turns reconose but not P990 screen and flash Smarth neither detected
Click to expand...
Click to collapse
When you use both volume-buttons and connect usb, your phone enters APX-mode (==NVFlash mode.) Go to the following link:
http://www.modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/
thanks
My phone its working now. Thanks every body
With NVFLASH
Nice, but what did you achieve by doing the nvflash? Unless you flash a pre rooted rom for nvflash you end up with a newer or older official LG rom. As you know nvflash you should flash the rom by Homero. Then you get cwm (custom recovery), root and the ability to flash whatever you want
Hello I accidently went and flashed a s5570i rom into my s5570 and now my phone will not turn on,
or into download/recovery mode.
I have a question will a jig get me into download mode?
Thanks in advance
Also plugged usb in and was holding
Home + power + volume up
and odin detects it but the phone wont flash or turn on and there is nothing on the screen
PhaseCoder said:
Also plugged usb in and was holding
Home + power + volume up
and odin detects it but the phone wont flash or turn on and there is nothing on the screen
Click to expand...
Click to collapse
Download mode is home+power+vol down
Tapatalk 2-vel küldve az én GT-S5570-ről
Yea I know that, but it wont boot to recovery or download mode.
But when I press volume up home and power odin detects it
heyy, the problem already has a solution?
my phone S5570 also has the same problem, black screen, can not go into recovery mode or download mode.
but go to RAMDump (vol up + home + power) and connect it to my PC, my S5570 is detected by the PC and odin, but can not flashing my rom.
stuck in "Setup Connection" I know it because my phone is not in the download mode.
whether the USB JIG is the right solution?
sorry if my language is bad
PhaseCoder said:
Hello I accidently went and flashed a s5570i rom into my s5570 and now my phone will not turn on,
or into download/recovery mode.
I have a question will a jig get me into download mode?
Thanks in advance
Click to expand...
Click to collapse
(I think this set of steps works in these
conditions: Hard-brick, absolutely non-
responsive to any button combination.
Odin still recognizes the phone when
connected through USB port)
1.- Remove both the SIM card and de
microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button
combination (known by you all)
4.- WHILE HOLDING THE
COMBINATION, insert the battery, and
keep the buttons pressed untill you get
the download mode.
5.- Flash your phone with a valid
firmware through Odin (Preferebly,
have Odin prepared before doing this
trick).........
hit thanks if this helped you and others....
R: [Q] Hard bricked s5570
Henota11 said:
heyy, the problem already has a solution?
my phone S5570 also has the same problem, black screen, can not go into recovery mode or download mode.
but go to RAMDump (vol up + home + power) and connect it to my PC, my S5570 is detected by the PC and odin, but can not flashing my rom.
stuck in "Setup Connection" I know it because my phone is not in the download mode.
whether the USB JIG is the right solution?
sorry if my language is bad
Click to expand...
Click to collapse
Try to press power+home+vol down+vol up
It'll go to emergency download mode.
Need tester for your rom (Galaxy Mini)? Just pm me! Sent from my BlackdroidLie v1 (My Phone often lies with this rom..)
steexyl said:
Try to press power+home+vol down+vol up
It'll go to emergency download mode.
Need tester for your rom (Galaxy Mini)? Just pm me! Sent from my BlackdroidLie v1 (My Phone often lies with this rom..)
Click to expand...
Click to collapse
and then?
I do not see any change, only detected on my computer
but the screen stays black
Send it to Samsung to repair it or try USB jig
Sent from my GT-S5570 using xda premium
tried jig didnt work, sent it to samsung was back in 3 days fully working
TIP: say you were during a call and phone turned off wouldbnt turn back on. do not mention ROOt or anything else
sir
PhaseCoder said:
tried jig didnt work, sent it to samsung was back in 3 days fully working
TIP: say you were during a call and phone turned off wouldbnt turn back on. do not mention ROOt or anything else
Click to expand...
Click to collapse
how much did you pay ?
hard brick galaxy mini
my galaxy mini also hard brick cannot go to downloading mode or recovery mode .tried jsb jig also cannot any other solution ???????
Same problem.. only solution is bring to ur frend technician, an operation will conduct to ur problem, pay for only 300 pesos here in the Philippines
Sent from my GT-S5570 using xda app-developers app
uploaded wrong rom on galaxy mini s5570,
phone turns off and dead I think,
nothing was working,
I've JTAG the phone from my friend,
phone turns on and able to enter in downloading mode only,
i've uploaded froyo android it failed,
then I uploaded arm11 boot file,
now phone won't be able to enter in DOWNLOAD MODE or recovery mode,
phone turns on and screen went black cannot be able to enter in DOWNLOAD MODE or recovery,
when I connect it to pc with usb cable it automatically turns on and screen turns black,
will usb jig works for it to enter in DOWNLOAD MODE??
please reply me if possible
thanks and regards
Sent from my GT-N7100 using xda app-developers app
---------- Post added at 10:55 PM ---------- Previous post was at 10:42 PM ----------
uploaded wrong rom on galaxy mini s5570,
phone turns off and dead I think,
nothing was working,
I've JTAG the phone from my friend,
phone turns on and able to enter in downloading mode only,
i've uploaded froyo android it failed,
then I uploaded arm11 boot file,
now phone won't be able to enter in DOWNLOAD MODE or recovery mode,
phone turns on and screen went black cannot be able to enter in DOWNLOAD MODE or recovery,
when I connect it to pc with usb cable it automatically turns on and screen turns black,
Odin also won't detecting it
will usb jig works for it to enter in DOWNLOAD MODE??
please reply me if possible
thanks and regards
Sent from my GT-N7100 using xda app-developers app
Jtag it again then try to re install the firmware
Sent from my GT-S5570 using xda app-developers app
brick s5570
I have a Samsung mini S7750, in resetting to factory defaults boot.
Boot mode or recovery mode does not.Only works is a combination of "home + vol up + vol down" moves into some mode where it while Odin detects the two com ports, but nothing to do, Odin hangs on setup conection.
JIG does not work [resistor 301kohm].Display is black.
[cz eng dictionary]
PhaseCoder said:
Hello I accidently went and flashed a s5570i rom into my s5570 and now my phone will not turn on,
or into download/recovery mode.
I have a question will a jig get me into download mode?
Thanks in advance
Click to expand...
Click to collapse
Try the simple just "hold power+home". It'll be leads you to recovery mode, then you should flash the appropriate rom for s5570. Cchopefully help
Sent from my GT-S5570 using Tapatalk
Help please
Hi. My S5570 is hard bricked. Will not turn on in any way i try. Does not go on download or recovery mode. The USB Jig method does not work for me. (I tried with around 3) and I connected my phone to my laptop and help down power + home + vol up and it does not recognise my device but when i do power + home + vol up + vol down it recognises it. I then used Odin to recover it but I have tried over 50 times and it is always stuck on "Setup connection...". Can someone please help? I have already tried re-installing Samsung USB Drivers. Still not working. Please help and thanks!
Kailens said:
Hi. My S5570 is hard bricked. Will not turn on in any way i try. Does not go on download or recovery mode. The USB Jig method does not work for me. (I tried with around 3) and I connected my phone to my laptop and help down power + home + vol up and it does not recognise my device but when i do power + home + vol up + vol down it recognises it. I then used Odin to recover it but I have tried over 50 times and it is always stuck on "Setup connection...". Can someone please help? I have already tried re-installing Samsung USB Drivers. Still not working. Please help and thanks!
Click to expand...
Click to collapse
Only hold vol up+home+power and THEN connect it if download mode works. I mean if it's recognized by the computer, download mode has to work, there is no way. If it does, then flash a stock ROM.
Oh and also something: before doing this, pull out your sd card and even your sim card. The same thing happened to my phone and Odin could flash it after removing everything.
Kailens said:
Hi. My S5570 is hard bricked. Will not turn on in any way i try. Does not go on download or recovery mode. The USB Jig method does not work for me. (I tried with around 3) and I connected my phone to my laptop and help down power + home + vol up and it does not recognise my device but when i do power + home + vol up + vol down it recognises it. I then used Odin to recover it but I have tried over 50 times and it is always stuck on "Setup connection...". Can someone please help? I have already tried re-installing Samsung USB Drivers. Still not working. Please help and thanks!
Click to expand...
Click to collapse
There is another way that u can try:
(Asumming that samsung mobile drivers are installed, with no Samsung KIES... & odin running in the foreground.)
*Remove sim, sdcard & battery.
*Now connect ur phone(without battery) to pc via usb cable.
*Now press the usual download mode keys(volume down & home & power buttons) together without the battery.
*While still holding those three buttons, insert the battery.
At this point Odin should detect ur phone so that u can flash stock firmware.
U can try this atleast since u r left with no choice:sly:.
Good Luck..!!:thumbup:
Hope this helps...!!
After installing Maclaw CW11.0 i decided to install SlimROM.
Now, It seems I'm in a Bootloop.
I'm unable to go to download mode or Recovery by using the buttons.. Vol Up(or Down) + Home + Power Doesn't do anything
Vol Up + Vol Down and then plugging in the USB cable doesn't do anything either...
I just see the SlimROM logo blinking for a while... then it stops... and it reboots...
Anyone any ideas of what i can do?
S.Phrenic said:
After installing Maclaw CW11.0 i decided to install SlimROM.
Now, It seems I'm in a Bootloop.
I'm unable to go to download mode or Recovery by using the buttons.. Vol Up(or Down) + Home + Power Doesn't do anything
Vol Up + Vol Down and then plugging in the USB cable doesn't do anything either...
I just see the SlimROM logo blinking for a while... then it stops... and it reboots...
Anyone any ideas of what i can do?
Click to expand...
Click to collapse
i think you forgot to wipe before flashing the new rom.
So pull out the battery, wait few seconds, put it in and try to reboot into recovery or download-mode.
Good luck
I'd love to do that, but how do I go into those modes if 3 button combo doesn't work nor vol up + vol down + plug in usb?
S.Phrenic said:
I'd love to do that, but how do I go into those modes if 3 button combo doesn't work nor vol up + vol down + plug in usb?
Click to expand...
Click to collapse
try this one (but without guarranty:
1. power off phone
2. remove battery.
3. plug in USB cable to computer and phone (with battery out)
4. hold Vol Up and Vol Down
5. drop in the battery while still holding the vol buttons
6. in 2 secs you'll be in download mode
Good luck
Thnx for the good luck
However, I've tried that method and it didn't work. I've ordered a USB Jig, maybe that can help.
Let you know
why cant you go to download mode
dont release those buttons until you go to download mode [do it when your phone is completly powered off]
did u flash three way combo recovery by benzonator
eswarvf said:
why cant you go to download mode
dont release those buttons until you go to download mode [do it when your phone is completly powered off]
did u flash three way combo recovery by benzonator
Click to expand...
Click to collapse
no he didn´t ... for flashing he needs download-mode
But he can use adb method
---------- Post added at 11:12 PM ---------- Previous post was at 11:01 PM ----------
S.Phrenic said:
After installing Maclaw CW11.0 i decided to install SlimROM.
Now, It seems I'm in a Bootloop.
I'm unable to go to download mode or Recovery by using the buttons.. Vol Up(or Down) + Home + Power Doesn't do anything
Vol Up + Vol Down and then plugging in the USB cable doesn't do anything either...
I just see the SlimROM logo blinking for a while... then it stops... and it reboots...
Anyone any ideas of what i can do?
Click to expand...
Click to collapse
Not a brick only no system support
Download mode - use three way comnations only when ur phone is totally turned off and press and hold them don't leave them
I own multiple phones and tablets and I can get every single one into download mode. Just not this one. The three button combo does not work, not even when I remove my battery first. As soon as I'm home I'll make a small video of what happens.
Btw, the only mode I can actually get in to is: POWER RESET or UNKNOWN UPLOAD MODE
I get there by holding Vol Up & Power On
Any thoughts?
https://www.youtube.com/watch?v=eEWcKCHi3YE
Sent from my GT-N8010 using XDA Premium HD app
Omg, I sound so bored, sorry about that. Had a long day and I'm very tired
Sent from my GT-N8010 using XDA Premium HD app
U r pressing wrong combination for download mode you have to press
Vol down + "power" + home and have to hold it to enter no s3 mini logo appears before download mode
http://www.youtube.com/watch?v=1tdznfLJsyY
see in this video he doesnt leave power button
and after that flash 3 way recovery from this thread by using odin - download mode
http://forum.xda-developers.com/showthread.php?t=2066407
@S. Phrenic
press vol up + menu + power much longer. The s3 mini logo appears 2 times and then recovery mode comes up.
if this doesn´t help, try ADB method
1. Download and install Android SDK
2. Connect the phone to the PC via USB
3. Press Win key+ r and type cmd
4. Type adb reboot recovery
5. Done. Phone should reboot into recovery
Good luck
In the video I'm showing 3 different things:
1. Vol Up + Power + Home
2. Vol Down + Power + Home
3. Vol Up + Vol Down
Non of them work. I checked your video, I don't see how I do anything different.
Duration change, check! I've now held it for 3 min.
I've got a S2 plus laying next to me and I can get into download mode without any trouble. This means I know how to get into recovery and download mode without any trouble.
https://www.youtube.com/watch?v=V9PZ5-66_L4
hopefully I'll get my jig tomorrow
S.Phrenic said:
In the video I'm showing 3 different things:
1. Vol Up + Power + Home
2. Vol Down + Power + Home
3. Vol Up + Vol Down
Non of them work. I checked your video, I don't see how I do anything different.
Duration change, check! I've now held it for 3 min.
I've got a S2 plus laying next to me and I can get into download mode without any trouble. This means I know how to get into recovery and download mode without any trouble.
https://www.youtube.com/watch?v=V9PZ5-66_L4
hopefully I'll get my jig tomorrow
Click to expand...
Click to collapse
Oh sorry please press those buttons at same time I also got this situation
OK now I will post this video myself watch carefully
And compare
---------- Post added at 07:51 PM ---------- Previous post was at 07:37 PM ----------
here you go sorry for english but video shows all
http://www.youtube.com/watch?v=NAb2JwsG79A&feature=youtu.be
Does my phone need to be turned on for the adb method?
it says, error: device not found
Kies doesn't see the device... because it's not powered i'm assuming..
Think I found my problem.... USB debugging is disabled... I think.... as I can't remember enabling it
Try emergency restore in Samsung Kies.
S.Phrenic said:
Does my phone need to be turned on for the adb method?
it says, error: device not found
Kies doesn't see the device... because it's not powered i'm assuming..
Think I found my problem.... USB debugging is disabled... I think.... as I can't remember enabling it
Click to expand...
Click to collapse
Yes it needs to be turned on to system with adb debug, or to custom recovery.
For emergency mode in kies I think you need download mode as well.
You don't need adb debug enabled to use download mode, but for some reason you can't enter dl-mode
tys0n said:
Yes it needs to be turned on to system with adb debug, or to custom recovery.
For emergency mode in kies I think you need download mode as well.
You don't need adb debug enabled to use download mode, but for some reason you can't enter dl-mode
Click to expand...
Click to collapse
First: I Fixed it!!! Jeej!... Used an USB Jig which i bought for a few bucks.
Second: This person seems to have the same problem
Hello guys, I have a major problem with my Nokia 8 on Oreo 8.1 Beta. I've installed substratum with andromeda and used some themes. After some time I rebooted the phone to improve stabilty. But now I can't start it, it goes just to lockscreen and then force closes system UI. I've tried to hard reset it but i can't find or enter recovery mode. can someone please help me, i may reward the one with the first solution. Please help.
Some themes do that i faced that issue back in 8.0. i don't remember how i managed to get into recovery but you need to plug it into your pc. I tried every combination that can be done with 3 buttons and somehow managed to get into recovery, but as i said i don't remember the exact combination.
Sent from my TA-1012 using XDA Labs
---------- Post added at 01:53 PM ---------- Previous post was at 01:52 PM ----------
Hello,
1- Nokia off.
2- Plug USB cable (mandatory).
3- Then push on vol+ until android robot appears.
4- Then push Power On first, maintain it and then press Vol+ to launch recovery menu.
All credits go to @cb_diamond
Sent from my TA-1012 using XDA Labs
Toedwarrior said:
Some themes do that i faced that issue back in 8.0. i don't remember how i managed to get into recovery but you need to plug it into your pc. I tried every combination that can be done with 3 buttons and somehow managed to get into recovery, but as i said i don't remember the exact combination.
Sent from my TA-1012 using XDA Labs
---------- Post added at 01:53 PM ---------- Previous post was at 01:52 PM ----------
Hello,
1- Nokia off.
2- Plug USB cable (mandatory).
3- Then push on vol+ until android robot appears.
4- Then push Power On first, maintain it and then press Vol+ to launch recovery menu.
All credits go to @cb_diamond
Sent from my TA-1012 using XDA Labs
Click to expand...
Click to collapse
thanks a lot, i managed to get into the NO COMMAND section via ADB (adb reboot recovery). now i can't really enter the recovery mode, it just keeps rebooting.
leonausvigilasci said:
thanks a lot, i managed to get into the NO COMMAND section via ADB (adb reboot recovery). now i can't really enter the recovery mode, it just keeps rebooting.
Click to expand...
Click to collapse
When you are in that screen do the point 4: press and hold the power button and then press the volume up.
Sent from my Nokia 8 using XDA Labs
Toedwarrior said:
Some themes do that i faced that issue back in 8.0. i don't remember how i managed to get into recovery but you need to plug it into your pc. I tried every combination that can be done with 3 buttons and somehow managed to get into recovery, but as i said i don't remember the exact combination.
Sent from my TA-1012 using XDA Labs
---------- Post added at 01:53 PM ---------- Previous post was at 01:52 PM ----------
Hello,
1- Nokia off.
2- Plug USB cable (mandatory).
3- Then push on vol+ until android robot appears.
4- Then push Power On first, maintain it and then press Vol+ to launch recovery menu.
All credits go to @cb_diamond
Sent from my TA-1012 using XDA Labs
Click to expand...
Click to collapse
This did not work for me. I have the exact same problem as the OP and cannot, for the life of me, get into recovery mode. All I did was update to Android 8.1 as the phone prompted me to do and now every time it boots up I get a "System UI has stopped working" prompt.
I've Googled and Googled and no combination of hardware buttons or plugging into the computer has gotten recovery mode to work.
hasasimo said:
This did not work for me. I have the exact same problem as the OP and cannot, for the life of me, get into recovery mode. All I did was update to Android 8.1 as the phone prompted me to do and now every time it boots up I get a "System UI has stopped working" prompt.
I've Googled and Googled and no combination of hardware buttons or plugging into the computer has gotten recovery mode to work.
Click to expand...
Click to collapse
if you have usb debugging activated in the developer settings on your phone you can:
- install minimal adb fastboot and adb drivers on your pc
- plug it in to your pc turned on
- open command prompt in pc, then simply type in " adb reboot recovery" and then the phone should reboot to recovery and you can reset it.
cri347 said:
When you are in that screen do the point 4: press and hold the power button and then press the volume up.
Click to expand...
Click to collapse
Thanks! Reading the instruction correctly did the trick.
On the "no command" screen: HOLD the power and PRESS Vol+ (press but do not hold).
Try enter safe mode
-Reboot your phone
-hold volume down button
-wait until Vibrate several Times
-after you enter safe mode go to app management and uninstall theme
So today I tried to Update my p20 pro with HuRupdater (link)
but unfortunately it showed me couple of errors. I tried to reboot my Phone and now I cant turn it on anymore.
Can someone help me please?
Hello! First of all, try to check if you can enter into fastboot mode or recovery.. if you can, use HI suite to recover the phone.
Horayken said:
Hello! First of all, try to check if you can enter into fastboot mode or recovery.. if you can, use HI suite to recover the phone.
Click to expand...
Click to collapse
I can´t enter fastboot or recovery. I tried every shortcut (Volume UP/Volume Down+ Power) ,but that doesn't work neither.
Have you tried erecovery ? Hold down vol+ while you plug in a power source.
Definitely eRecovery will work. That's volume up after applying power or power button. Not at same time because that'll give you normal recovery.
Try it a few times if it doesn't work first time.
It'll ask to download the full software (3GB).
xsacha said:
Definitely eRecovery will work. That's volume up after applying power or power button. Not at same time because that'll give you normal recovery.
Try it a few times if it doesn't work first time.
It'll ask to download the full software (3GB).
Click to expand...
Click to collapse
Nope that doesn't work neither. I tried it a few times. My phone is literally dead. It doesn't even vibrate when I connect it to my PC or a power source.
Preyz-z said:
Nope that doesn't work neither. I tried it a few times. My phone is literally dead. It doesn't even vibrate when I connect it to my PC or a power source.
Click to expand...
Click to collapse
That doesn't sounds too good. still nothing?? what else have you tried?
What update did you try to flash?
Sent from my Mate 10 using Tapatalk
nothing happen when you press and hold Volume Down button and plug usb to your pc and your phone? not boot into fastboot at all?
No need to pay to anyone, finally solved. Try and let me know
https://forum.xda-developers.com/huawei-p20-pro/help/p20-pro-bricked-t3868085
---------- Post added at 02:56 AM ---------- Previous post was at 02:49 AM ----------
No need to pay to anyone, finally solved. Try and let me know
https://forum.xda-developers.com/huawei-p20-pro/help/p20-pro-bricked-t3868085