Database Develop

Got ADB running, now what?

So I'm trying to get the Gapps from this link http://nookdevs.com/NookColor:_Nookie_Froyo_Tips#3rd-Party_App_support. I believe I got ADB and the drivers installed correctly. Now what do I do. I open up CMD and when I put in the first line of that script, it basically says $ is not a recognized command or something along those lines. I'm so close to doing the last thing I want to, but can't get over this hump. Can someone give me the play by play on what to do?

Don't type the $. The $ is representing the typical command prompt in *nix (such as Linux) based OSes. You just need to enter everything after the $.

Ok, after I do the first line of
adb shell mount -o remount,rw /dev/block/mmcblk1p2 /system
adb push C:\Documents and Settings\g018807\Desktop\system/
adb reboot
It won't let me type anything else or paste anything else. What am I doing wrong?

Is their anyone who can take me through this?

now I'm just getting ADB not found.

When you issue the command "adb devices" (without quotes), what do you see? Anything? If you see nothing, then your device isn't connected.

eyecrispy said:
When you issue the command "adb devices" (without quotes), what do you see? Anything? If you see nothing, then your device isn't connected.
Click to expand...
Click to collapse
It says list of devices attached
*****numbers* Device

Now it's back to the point where after I hit ADB Shell it just doesn't let me type anything.

Does it just lock up? can you try cntl-C out of it? Other than adb shell, can you do any other adb commands? like adb push or adb pull?

eyecrispy said:
Does it just lock up? can you try cntl-C out of it? Other than adb shell, can you do any other adb commands? like adb push or adb pull?
Click to expand...
Click to collapse
I can cntl-c out of it. If I type push or pull it gives me this
Android Debug Bridge version 1.0.26
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number. Overrides ANDROID_SERI
AL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this ocmmand with no additional arguments
will disconnect from all connected TCP/IP devic
es.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and i
nstall it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.
Click to expand...
Click to collapse

I have USB debugging on, and I turned on storage mode. Are both of those right?

buffnutz1 said:
I have USB debugging on, and I turned on storage mode. Are both of those right?
Click to expand...
Click to collapse
Yeah, USB debugging is definitely needed. Having storage mode on is fine too.
But let's slow down and back up a little here. Btw, I'm not trying to be condescending with the following. Just being thorough.
First, unplug your Nook from USB. Next, on the Nook uncheck then recheck USB debugging. Now back up to the Home screen.
If you're running Windows Vista/7, make sure you're running command prompt as Administrator. Better safe than sorry. Now at a command prompt type:
adb kill-server
There won't be any result but you should get back to the command prompt.
Now connect the Nook via USB and type:
adb devices
This is just to re-connect your Nook to your computer. You should get a result like:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
xxxxxxxxxxxxxxxxxx device
Click to expand...
Click to collapse
Now type:
adb shell
If you don't get a $ (unrooted) or # (rooted) prompt, then I think there is something wrong with the drivers you installed.
If you do get a $ or # prompt, type:
exit
You should be back to your command prompt.
If you get this far, re-extract or move the zip from http://nookdevs.com/NookColor:_Nookie_Froyo_Tips#3rd-Party_App_support to C:\Temp.
At a command prompt type:
cd C:\Temp
dir
You should get something like
Volume in drive C has no label.
Volume Serial Number is B077-0836
Directory of C:\Temp
02/15/2011 03:06 PM <DIR> .
02/15/2011 03:06 PM <DIR> ..
02/15/2011 03:06 PM <DIR> META-INF
02/15/2011 03:06 PM <DIR> system
0 File(s) 0 bytes
4 Dir(s) 20,067,143,680 bytes free
Click to expand...
Click to collapse
Now type (or copy/paste):
adb shell mount -o remount,rw /dev/block/mmcblk1p2 /system
You should get back to a command prompt. Now type (or copy/paste):
adb push "C:\Temp\system" system/
Again you should get back to a command prompt. Now type (or copy/paste):
adb reboot
This will reboot your Nook and the Google Apps will be available.

You are seriously the best friggin guy ever. Thanks so much. I was missing this entire step
cd C:\Temp
dir

No problem. Actually I'm glad it worked because I just realized that my steps were assuming that you have Froyo on a micro SD card. This wouldn't have worked if you had Froyo on the internal memory. Also, that step you missed is really not necessary. That's just to make sure you had the zip extracted properly. In any case, good to hear it worked out.

Try this here>nookdevs{dotcom}/NookColor_USB_ADB
^ please insert .com for {dotcom} as i cant post links since i dont have enough posts, this forum is good but kinda harsh towards newcomers, otherwise love the forum.
I was stuck at the same spot as you and took me forever to find the fix until i stumbled upon that page. Im in Ubuntu 10.04 so i cant speak for the windows procedure, but it worked perfect for me. I now have HC v3 with gapps thanks to that site. hope this helps

I'm having similar issues. Unfortunately I'm leaving for Fl. for 4 days. As an aside, it would be great if there were some kind of adb gui program for windows. Something were instead of manually entering dos commands like "/dev/block/mmcblk1p2 /system" you could just browse to your nooks system dir. and drop the file in question. Probably just dreaming here. Anyway, I will try your guide as soon as I get back. Cant wait!

[GUIDE] How to ADB Push to fix a formatted /sdcard (Mac + PC)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This guide will help you to restore your phone if you happen to have wiped your internal sdcard and have no way of getting your phone to boot to a functional state.
This method is 99.9% safe, and should anyone break their phones as a direct result of this guide, I will send a donation
Requirements: A computer running either Windows or Mac
An unlocked bootloader, which can be achieved at http://www.htcdev.com/bootloader
This guide, best served cold, comes in three parts:
Unlocking the bootloader
Installing the ADB drivers
Restoring your phone
Feel free to skip to the part you require, and I hazard a guess at saying most people can skip straight to the third and most important part, where the magic actually happens.
Unlockin' the bootloader
First off, you need to head over to HTC Dev and select 'All Other Supported Models' in the little drop down menu, then press the big green button as shown.
This will then require you to register, and you can then follow the steps provided by HTC. Obviously, during this process you're gonna come to a point where ADB drivers are needed to flash your unlock token, so take a peek down the page. I aren't going into detail with this unlock guide because I am fully aware that there are detailed guides elsewhere in the forums, from people who have a lot more time to sit and explain things than I do.
Installin' the ADB drivers
Howdy partner, this here thang be the most important thing you can ever do regarding your Android and PC ecosystem, and you're gonna be hella glad that you did it. After installing ADB, you're free to enjoy the wonderful world that is logcats, custom recoveries, ROMs, kernels; the whole package!
First off, select your OS!​
Windows 7
Congratulations! You have managed to avoid the flop that is Windows 8, kudos to you.
First, head over to HTC Sync Manager and download this and install, to gain the required drivers.
Now, head over to the Android SDK and download it, using the big blue download button. Simpless.
Extract this zip file to the root of your C:/ drive.
Now you're done! To check it's working, open the platform-tools folder of the SDK and then hold down Shift, Right Click and press 'Open Command Window here'.
Now, type
Code:
adb devices
If your device is plugged in, and powered into Android or a custom recovery, it should appear as a serial number here!
Windows 8
Sorry to hear you're stuck with the latest and far from greatest iteration of Windows, but don't let that Metro interface get you down! Lets crack on.
First, head over to HTC Sync Manager and download this and install, to gain the required drivers.
Now, head over to the Android SDK and download it, using the big blue download button. Simpless.
Extract this zip file to the root of your C:/ drive.
Now you're done! To check it's working, open the platform-tools folder of the SDK and then hold down Shift, Right Click and press 'Open Command Window here'.
Now, type
Code:
adb devices
If your device is plugged in, and powered into Android or a custom recovery, it should appear as a serial number here!
Mac
Finally, someone with a good taste in operating systems This is the easiest thing you will do all day, believe me.
First, head over to HTC Sync Manager and download this and install, to gain the required drivers.
Now, head over to the Android SDK and download it, using the big blue download button. Simpless.
Locate the zip, or folder (if you have 'Open "safe" files' turned on) in your Downloads folder and drag it to your Desktop. If it ain't extracted, give it a double click to extract it.
Now open the folder and navigate to 'platform-tools'. Drag this to your Desktop out of the main folder.
Open Terminal and type:
Code:
cd Desktop/platform-tools
./adb devices
If your phone is plugged in, and powered into Android or a custom recovery, the serial number will show up here. Congrats, adb is set up, now lets restore your phone.
Usin' ADB Push
So, you're stuck in recovery and cannot boot, or you just need to transfer a file to your phone for whatever reason... This is the method to transfer a rom back onto your phone, in order to make it fully functional again. This works in both recovery and booted Android, meaning it is also a good way to transfer music and photos when your phone boots again. This process doesn't wipe any data.
First, open platform-tools (your adb folder as described above). Download any ROM from the HTC One section of XDA and drag the .zip inside here
Hold down Shift and Right-Click, selecting 'Open Command Window Here'.
On a Mac, open Terminal and type;
Code:
cd Desktop/platform-tools
to achieve the same result.
Now, we are ready to use the ADB push command.
Plug your phone into your computer in recovery mode, and in CMD type:
Code:
adb push NameOfRom.zip /data/media/
Be aware that on Android 4.2.2, you need to type '/data/media/0/'
On a Mac, type:
Code:
./adb push NameOfRom.zip /data/media/
(or /data/media/0/ if coming from a 4.2.2 rom)
Now, wait for the process to complete. This takes on average around 260 seconds for a 900mb rom, with no progress indicator. Don't worry, it hasn't frozen.
When it completes, type:
Code:
adb reboot recovery
or
Code:
./adb reboot recovery
on a Mac.
Your file can now be found on your sdcard, and can be flashed from the 'Install zip from sdcard' screen.
That's it, you have saved your phone, and can now get back to using it again!​

Annddd I've posted this in the wrong section by accident... Sorry I was too excited about finishing ;D

Great tutorial. I wish I had seen that a couple of days ago when I accidentally wiped my internal SD and had no ROM to flash. Thanks to the members here and hours and hours of Googling, though, I was able o get ADB working. Bookmarked!

Great work - this should be a sticky on the Q & A page. This issue/problem comes up 2 or 3 times per day. Especially since 4.2.2 releases came out.
Sent from my HTC One using xda premium

Sticked until August 1st. If there is still a problem with formatted sd-cards then, we will re-asess.

I can't believe there are still people around android who don't know how to push I had to do that as well as I had my internal SD wiped too during the S-OFFing/unlocking...
One a bit OT, but does anyone know why the TWRP lacks the advanced "mount USB storage" feature? I had that one on my OneX....
Cheers

Dr.Romca said:
I can't believe there are still people around android who don't know how to push I had to do that as well as I had my internal SD wiped too during the S-OFFing/unlocking...
One a bit OT, but does anyone know why the TWRP lacks the advanced "mount USB storage" feature? I had that one on my OneX....
Cheers
Click to expand...
Click to collapse
Neither TWRP nor CWM are able to Mount USB Storage anymore and I have no idea why. They were not able to mount on my Galaxy S3 either.

thnx
thanks you very much it helps me allot
thanks again

anyone know how to get around this so it actually pushes teh rom to the phone?
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.

TarekElsakka said:
Neither TWRP nor CWM are able to Mount USB Storage anymore and I have no idea why. They were not able to mount on my Galaxy S3 either.
Click to expand...
Click to collapse
at least they allow to use OTG to install roms, so (if you have the cable) you just can wipe the internal sd, and flash using an usb with OTG :good:

SLver said:
at least they allow to use OTG to install roms, so (if you have the cable) you just can wipe the internal sd, and flash using an usb with OTG :good:
Click to expand...
Click to collapse
Yeah, I'm aware of that. I went ahead and ordered an OTG cable when I mistakenly wiped my internal SD card before. It arrived about four days later, though, so I had already fixed the problem. I am sure when I want to do a fresh install, it'll make life much easier than having to sideload or push using ADB.

Great guide although i'm a bit stuck, when I run the ./adb push Rom.zip /data/media/0 command it says:
-bash: /Users/archiedennis/Desktop/platform-tools: is a directory
Any ideas anyone?
Running OSX btw

JustArchiee said:
Great guide although i'm a bit stuck, when I run the ./adb push Rom.zip /data/media/0 command it says:
-bash: /Users/archiedennis/Desktop/platform-tools: is a directory
Any ideas anyone?
Running OSX btw
Click to expand...
Click to collapse
./adb push rom.zip /data/media/0/

MacHackz said:
./adb push rom.zip /data/media/0/
Click to expand...
Click to collapse
sry for noob question.. but adb won't show my device
have latest drivers and htc sync installed.. it was working before, now it just won't

fcjan said:
sry for noob question.. but adb won't show my device
have latest drivers and htc sync installed.. it was working before, now it just won't
Click to expand...
Click to collapse
Download and run this: http://adbdriver.com/upload/AdbDriverInstaller.exe

MacHackz said:
Download and run this: http://adbdriver.com/upload/AdbDriverInstaller.exe
Click to expand...
Click to collapse
thanks.. now there is a another problem -.-
I was trying to do a clean install of ARHD, had some problems..
enter CM recovery, tested adb (working)
wipe data/factory reset, wipe cache, wipe /sdcard.. full wipe
now adb is saying
C:\adb>adb devices
adb server is out of date. killing...
ADB server didn't ACK
* failed to start daemon *
error:
FIXED.. had do delete adb.exe in HTC Sync folder, it works now.. thank you!

MacHackz said:
./adb push rom.zip /data/media/0/
Click to expand...
Click to collapse
Nope still the same thing :L

Dude!!! You are the greatest! Help me alot and saved my weekend *muchlove*

An all nighter, os X and Win7, 8 hours later you saved me. Thanks!

crash087 said:
anyone know how to get around this so it actually pushes teh rom to the phone?
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
Click to expand...
Click to collapse
I'm having the EXACT same issue....

Update.. issue

Hi guys I'm a bit of a noob when it comes to roms and updating phones.
I managed to root my phone and add team win and super user admin thing. I even updated all the way to Google vanilla but went back stock. My issues now is I want to update my phone via the update in systems and it won't let me. My phone boots up into team win recovery.
There's a 30mb update 2.24.401..... Can you help me with this small query. I just want to be able to update
Sent from my HTC One using xda app-developers app

nuzik said:
Hi guys I'm a bit of a noob when it comes to roms and updating phones.
I managed to root my phone and add team win and super user admin thing. I even updated all the way to Google vanilla but went back stock. My issues now is I want to update my phone via the update in systems and it won't let me. My phone boots up into team win recovery.
There's a 30mb update 2.24.401..... Can you help me with this small query. I just want to be able to update
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
You cannot update your phone when you have a custom recovery installed, you have to reinstall the stock recovery! If you have an international htc one with 2.24.401.1 here is a step by step guide to update the phone, i wrote it for someone else with the same problem as yours!
http://forum.xda-developers.com/showpost.php?p=45179063&postcount=5

im an idiot
RTIT said:
You cannot update your phone when you have a custom recovery installed, you have to reinstall the stock recovery! If you have an international htc one with 2.24.401.1 here is a step by step guide to update the phone, i wrote it for someone else with the same problem as yours!
http://forum.xda-developers.com/showpost.php?p=45179063&postcount=5
Click to expand...
Click to collapse
Ok it seems i went in TWRP and wiped everything, i have no roms on my phone! I cant get any files on it or anything suggestions please

nuzik said:
Ok it seems i went in TWRP and wiped everything, i have no roms on my phone! I cant get any files on it or anything suggestions please
Click to expand...
Click to collapse
lol dont worry your not an idiot, it happens to all of us what you have to do is boot into twrp go to advanced, then adb sideload and swipe, then on your computer open a command line where you have your folder for rooting the htc one (where fastboot and adb are etc...) and put any ROM in that folder, rename it to rom.zip and type "adb sideload rom.zip" without the quotes and you should be good to go!

Thanks one more...
RTIT said:
lol dont worry your not an idiot, it happens to all of us what you have to do is boot into twrp go to advanced, then adb sideload and swipe, then on your computer open a command line where you have your folder for rooting the htc one (where fastboot and adb are etc...) and put any ROM in that folder, rename it to rom.zip and type "adb sideload rom.zip" without the quotes and you should be good to go!
Click to expand...
Click to collapse
Sorry to ask any chance where the original stock HTC sense is? not the google play?

nuzik said:
Sorry to ask any chance where the original stock HTC sense is? not the google play?
Click to expand...
Click to collapse
No problem, here it is (2.24.401.1) http://forum.xda-developers.com/showthread.php?t=2353083
make sure you choose one of the odexed ones so you can install the update, either choose Stock Rooted + BusyBox Odexed or Stock Without ROOT Odexed
EDIT: btw if you install this rom, you can skip steps 3 and 4 in my step by step guide because this rom already containts these files

!
i keep getting an error closed message..
now all i get is the CMD prompt going through a list of things.
pushing etc

nuzik said:
i keep getting an error closed message..
Click to expand...
Click to collapse
Did you go to advanced, adb sideload and swipe and then entered the command in cmd?
EDIT: Try running "adb usb" and then running the "adb sideload rom.zip" command, it should work

RTIT said:
Did you go to advanced, adb sideload and swipe and then entered the command in cmd?
EDIT: Try running "adb usb" and then running the "adb sideload rom.zip" command, it should work
Click to expand...
Click to collapse
nope nothing still just runs through
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number. Overrides ANDROID_SERI
AL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devic
es.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and i
nstall it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
stem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is wr
itten
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks
themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the
device's
shared storage / SD card contents; the defau
lt is noshared.)
(-all means to back up all installed applicatio
ns)
(-system|-nosystem toggles whether -all automat
ically includes
system applications; the default is to inclu
de system apps)
(<packages...> is the list of applications to b
e backed up. If
the -all or -shared flags are passed, then t
he package
list is optional. Applications explicitly g
iven on the
command line will be included even if -nosys
tem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.
C:\android\android-sdk-windows\platform-tools>adb devices
List of devices attached
SH36WW900035 host
C:\android\android-sdk-windows\platform-tools>adb usb sideload rom.zip
error: closed
C:\android\android-sdk-windows\platform-tools>adb sideload rom.zip
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number. Overrides ANDROID_SERI
AL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devic
es.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and i
nstall it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
stem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is wr
itten
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks
themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the
device's
shared storage / SD card contents; the defau
lt is noshared.)
(-all means to back up all installed applicatio
ns)
(-system|-nosystem toggles whether -all automat
ically includes
system applications; the default is to inclu
de system apps)
(<packages...> is the list of applications to b
e backed up. If
the -all or -shared flags are passed, then t
he package
list is optional. Applications explicitly g
iven on the
command line will be included even if -nosys
tem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.
C:\android\android-sdk-windows\platform-tools>

nuzik said:
nope nothing still just runs through
Click to expand...
Click to collapse
Can you try this "adb push rom.zip /data/media/0/" and make sure that the rom zip file is in the platform tools folder

nope still nothing

nuzik said:
nope still nothing
Click to expand...
Click to collapse
Sorry I didnt say this eariler you have to run this command without going to advanced -> adb sideload so just enter the command "adb push rom.zip /data/media/0/" without going into sideload mode and tell me what happens and make sure you leave a space between zip and /media

well ive pressed it nothing is happening but it doesnt say failed yet

nuzik said:
well ive pressed it nothing is happening but it doesnt say failed yet
Click to expand...
Click to collapse
Does it say something like <12345678kb to 1234567kb> ?

no its just blank
said failed is a directory...

trying again straight to SDCARD
C:\android\android-sdk-windows\platform-tools>adb push rom.zip /sdcard/
4187 KB/s (1080318520 bytes in 251.959s)
when i go to flash it says failed reading zip...

nuzik said:
no its just blank
said failed is a directory...
Click to expand...
Click to collapse
Ok last thing I want you to try "adb push rom.zip /sdcard"
---------- Post added at 05:13 AM ---------- Previous post was at 05:10 AM ----------
nuzik said:
trying again straight to SDCARD
C:\android\android-sdk-windows\platform-tools>adb push rom.zip /sdcard/
4187 KB/s (1080318520 bytes in 251.959s)
when i go to flash it says failed reading zip...
Click to expand...
Click to collapse
mhm maybe try re-downloading the rom zip file, maybe its corrupted, but anyway now you can push any rom since its working, try pushing the google play edition rom until you redownload the sense rom

nuzik said:
trying again straight to SDCARD
C:\android\android-sdk-windows\platform-tools>adb push rom.zip /sdcard/
4187 KB/s (1080318520 bytes in 251.959s)
when i go to flash it says failed reading zip...
Click to expand...
Click to collapse
now its gone from the phone!

nuzik said:
now its gone from the phone!
Click to expand...
Click to collapse
Try pushing another rom, it should work!

RTIT said:
Try pushing another rom, it should work!
Click to expand...
Click to collapse
re did it and its installing i can go to bed now!!! i hope

[DEV][ROM][ION][JB 4.1.2][Sense 5] Visionary Sense 5 [BUILD#3][WIP][13 Jan]

Hello Guys , This is my port of Sense 5 from Desire 300 to HTC Desire C.
This is a complete stock Rom ported from system dump of desire 300.
I will Specially Thanks To @cute_prince for his ION kernel.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
Installation Instruction :
1. Here Is a new boot.img flash this : LINK
2.Wipe Cache/dalvik cache(if you use TWRP, format system and data)
3.Install Test Build 2
4.Wipe cache/dalvik cache
5.Reboot
Download :
Testing Build#3
Testing Build#2
Testing Build#1
Please Guys test and report me through logcat.
Credits :
@cute_prince for UniFiedKerNel ( ION Kernel ) and without him it was not possible
@MameTozhio for Desire 300 Dump

reserved..

more

last

Thanks gonna flash it now

Rom doesnt boot
boot stop on htc logo(this build is for development purposes only...)

Ansanen said:
boot stop on htc logo(this build is for development purposes only...)
Click to expand...
Click to collapse
Yea same for me. Can't pull logcat because it stops so early

Wait problem in boot.img.. i will see
Take Logcat :
adb dmsg > dmsg.txt

xaak said:
Wait problem in boot.img.. i will see
Take Logcat :
adb dmsg > dmsg.txt
Click to expand...
Click to collapse
I don't know if I'm doing it right i get blank file. It seems that comman is not found in adb

doweeez said:
I don't know if I'm doing it right i get blank file
Click to expand...
Click to collapse
same for me

Ansanen said:
same for me
Click to expand...
Click to collapse
Take out battery and switch on take log immediately
Sent from my HTC Explorer A310e using Tapatalk

xaak said:
Take out battery and switch on take log immediately
Sent from my HTC Explorer A310e using Tapatalk
Click to expand...
Click to collapse
Doesn't seem to work either.
Code:
[email protected]:~/sdk/sdk/platform-tools$ adb dmsg > dmsg.txt
Android Debug Bridge version 1.0.31
-a - directs adb to listen on all interfaces for a connection
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <specific device> - directs command to the device or emulator with the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
-H - Name of adb server host (default: localhost)
-P - Port of adb server (default: 5037)
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward --list - list all forward socket connections.
the format is a list of lines with the following format:
<serial> " " <local> " " <remote> "\n"
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb forward --no-rebind <local> <remote>
- same as 'adb forward <local> <remote>' but fails
if <local> is already forwarded
adb forward --remove <local> - remove a specific forward socket connection
adb forward --remove-all - remove all forward socket connections
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-obb|-noobb enable/disable backup of any installed apk expansion
(aka .obb) files associated with each application; the default
is noobb.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.

doweeez said:
I don't know if I'm doing it right i get blank file. It seems that comman is not found in adb
Click to expand...
Click to collapse
Ansanen said:
same for me
Click to expand...
Click to collapse
Here Is a new boot.img flash this : LINK

xaak said:
Here Is a new boot.img flash this : LINK
Click to expand...
Click to collapse
Yay got booting. Now I'm past development build only window. Haven't booted to homescreen yet. But now when I'm trying to use logcat I get this message
Code:
- exec '/system/bin/sh' failed: No such file or directory (2) -

doweeez said:
Yay got booting. Now I'm past development build only window. Haven't booted to homescreen yet. But now when I'm trying to use logcat I get this message
Code:
- exec '/system/bin/sh' failed: No such file or directory (2) -
Click to expand...
Click to collapse
Can you see bootscreen and whenrom boots up please provide screenshots and tell me whats working and whats not.
Sent from my HTC Explorer A310e using Tapatalk

xaak said:
Can you see bootscreen and whenrom boots up please provide screenshots and tell me whats working and whats not.
Sent from my HTC Explorer A310e using Tapatalk
Click to expand...
Click to collapse
For last 10-15 mins I'm at boot animation. So don't know is it normal to take so much time

doweeez said:
For last 10-15 mins I'm at boot animation. So don't know is it normal to take so much time
Click to expand...
Click to collapse
It will take time as to load apps.
Sent from my HTC Explorer A310e using Tapatalk

xaak said:
It will take time as to load apps.
Sent from my HTC Explorer A310e using Tapatalk
Click to expand...
Click to collapse
bootloop and i can make logcat
exec '/system/bin/sh' failed: No such file or directory 2 2) -

Ansanen said:
bootloop and i can make logcat
exec '/system/bin/sh' failed: No such file or directory 2 2) -
Click to expand...
Click to collapse
Unzip rom take updaterscript from sense 4 now rezip and flash rom now provide me complete logcat on pastebin

xaak said:
Unzip rom take updaterscript from sense 4 now rezip and flash rom now provide me complete logcat on pastebin
Click to expand...
Click to collapse
Logcat

[Q] help me adb sideload

-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number. Overrides ANDROID_SERI
AL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and i
nstall it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
When I type "adb sideload filename.zip" cmd show me this. what's the problem?

Help this company said:
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number. Overrides ANDROID_SERI
AL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and i
nstall it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
When I type "adb sideload filename.zip" cmd show me this. what's the problem?
Click to expand...
Click to collapse
filename.zip needs to be replaced with the actual name of the rom.zip you are trying to upload. Try these for instructions
http://forum.xda-developers.com/showthread.php?t=2318497

mb_guy said:
filename.zip needs to be replaced with the actual name of the rom.zip you are trying to upload. Try these for instructions
http://forum.xda-developers.com/showthread.php?t=2318497
Click to expand...
Click to collapse
U mean that dont rename the file name? And Could U tell me where the Official rom?? Ah, I downloded my korea htc cafe. That file is "pn7140 ruu.zip"file. I did several times that explain.

Help this company said:
U mean that dont rename the file name? And Could U tell me where the Official rom?? Ah, I downloded my korea htc cafe. That file is "pn7140 ruu.zip"file. I did several times that explain.
Click to expand...
Click to collapse
I assumed you had not renamed the file to pn7140 ruu.zip since you are getting the help page information.
Is the actual file in the same directory folder as adb? It should be. You might rename the file to something shorted like just "pn7140.zip" to make it easier.

a
mb_guy said:
I assumed you had not renamed the file to pn7140 ruu.zip since you are getting the help page information.
Is the actual file in the same directory folder as adb? It should be. You might rename the file to something shorted like just "pn7140.zip" to make it easier.
Click to expand...
Click to collapse
adb sideload is only custum rom?? my device not booting just only logo. Whats the problem...

Help this company said:
U mean that dont rename the file name? And Could U tell me where the Official rom?? Ah, I downloded my korea htc cafe. That file is "pn7140 ruu.zip"file. I did several times that explain.
Click to expand...
Click to collapse
3 threads for the same issue.....
Thread 1
Thread 2
We were trying to help you in the other thread (thread 2). Why did you started two new threads? This only complicates things and makes it difficult to help you
5. Create a thread or post a message only once.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
Click to expand...
Click to collapse
http://forum.xda-developers.com/announcement.php?a=81

Help this company said:
adb sideload is only custum rom?? my device not booting just only logo. Whats the problem...
Click to expand...
Click to collapse
Alray had suggested you flash a custom rom like arhd, Are you not trying to do that??

Help this company said:
adb sideload is only custum rom?? my device not booting just only logo. Whats the problem...
Click to expand...
Click to collapse
Adb sideload is a feature of custom recovery (TWRP / CWM). You must boot to recovery and start sideload feature before running adb sideload from command prompt, otherwise adb doesn't recognize the command and displays the help text instead.

sprint lg optimus g
im trying to get my phone working, my kid picked it up when it was in twrp and started having fun... guess she did a full wipe. lol. anyway problem is now i can do adb devices and see phone, but when i swipe sideload it says host not sideload.

Wheelindude said:
im trying to get my phone working, my kid picked it up when it was in twrp and started having fun... guess she did a full wipe. lol. anyway problem is now i can do adb devices and see phone, but when i swipe sideload it says host not sideload.
Click to expand...
Click to collapse
You are currently in the HTC One Q&A forum better to ask your question in the right forum, everything you will find here may not apply to your phone. Here is the link for the Sprint LG Optimus G forums: http://forum.xda-developers.com/optimus-g-sprint