Database Develop

I can't Connect My Bricked Phone..

Hello Xda... I Can't Connect My bricked Phone to Pc. When i put it and turn it on flash mode it tells that failed to install the device drivers. Seus , PC Companion , Flashtool Can't Recognize it. can anyone help me? Thanks In advance.

First of all how you broke it? Second before you can proceed with seus or any other tool you need to install all drivers for your phone.....
Sent from my E15 using XDA App

dsaklein said:
First of all how you broke it? Second before you can proceed with seus or any other tool you need to install all drivers for your phone.....
Sent from my E15 using XDA App
Click to expand...
Click to collapse
i installed CM7 rom from NaA the new one , without the custom kernel. i can't go to recoveries. how can i fix it ?

eu8umhc said:
i installed CM7 rom from NaA the new one , without the custom kernel. i can't go to recoveries. how can i fix it ?
Click to expand...
Click to collapse
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".

B.Jay said:
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".
Click to expand...
Click to collapse
i See The Flash Mode Green LEd yes. When I Start it, i see the SOny ericsson logo and it stucks there. i try to connecto to pc and it can't install drivers for device. how can i rescue it? tommorow i have a lesson and i need it :S and also it tells that cant recognized.

B.Jay said:
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".
Click to expand...
Click to collapse
Finally I did it! Big Thanks to you. I Installed the drivers and it recognized. big thanks

Well, that's exactly from where Vlackrs and I already recovered our phones after a bad flash ("stuck at the Sony Ericsson logo").
Start Flashtool and select "Check drivers".
If it turns out as "OK" on all three checks it seems you have the drivers installed already.
If not ... try to install Gordon's Gate (should be included with Flashtool and called "ggsetup.exe").
Follow the instructions I wrote up here to restore the device.
Note that I did NOT use Flashtool 0.5 as 0.5.0.0, 0.5.0.1 and 0.5.0.2 failed to recognize the device (and yes, I replaced the "E15.properties" with the files posted in the Flashtool thread in the Development section) - Flashtool 0.2.9.1 did the trick for us.
Edit
eu8umhc said:
Finally I did it! Big Thanks to you. I Installed the drivers and it recognized. big thanks
Click to expand...
Click to collapse
Ok - good you got the driver problem resolved ... seems I was too slow writing up my post.

B.Jay said:
Well, that's exactly from where Vlackrs and I already recovered our phones after a bad flash ("stuck at the Sony Ericsson logo").
Start Flashtool and select "Check drivers".
If it turns out as "OK" on all three checks it seems you have the drivers installed already.
If not ... try to install Gordon's Gate (should be included with Flashtool and called "ggsetup.exe").
Follow the instructions I wrote up here to restore the device.
Note that I did NOT use Flashtool 0.5 as 0.5.0.0, 0.5.0.1 and 0.5.0.2 failed to recognize the device (and yes, I replaced the "E15.properties" with the files posted in the Flashtool thread in the Development section) - Flashtool 0.2.9.1 did the trick for us.
Edit
Ok - good you got the driver problem resolved ... seems I was too slow writing up my post.
Click to expand...
Click to collapse
It's ok . the info you gave me is important. now i will read the link you gave me. Big Thanks Again..

can someone help me please...i restored a backup of gingerdx and after that i'm stuck in SE screen and led not working when connected to pc

Impossible to install fastboot drivers on Win7

Hello all,
I have followed all tutorials out there to make my Xperia Z recognized in fastboot mode.
I am a developer, so the sdk is working, with all the adb stuff, I put the devices in fastboot mode with up volume button, and I tried to install the drivers provided on Sony website or on various xda thread but without success!
As you can see on attached screenshot, windows does not want to install the drivers.
Just as a note, I am not completely stupid and was able to select a directory (usb_drivers from sdk) where I placed the ini file.
Any idea on how I can fix this?

Download sony update service it has the drivers.
Sent from my C6603 using xda premium

Just tried but still the same issue..
When Update service is running, I am able to use it (boot with down volume as requested by Update Service) but no fastboot (boot with up volume)

Have you tried drivers that come with flashtool (you need to tick them at install)
[email protected]

indycar said:
Have you tried drivers that come with flashtool (you need to tick them at install)
[email protected]
Click to expand...
Click to collapse
I installed flashtools from official Sony website : http://developer.sonymobile.com/services/flash-tool/how-to-download-and-install-the-flash-tool/
Same result:

^Just disable driver signature verification on your Windows 7/8.
I faced a similar issue on my W8 Desktop, disabling it did the trick for me!

I have had the same issue OP. Here is what you do:
Download and install flashtool.
Go to the flashtool directory and go into the drivers folder. After that you select the drivers you need
Personally I tick the bottom 3 and install. Windows will warn you about unverified drivers, but you click install drivers and it works.
I got this flashtool from xda. it should mostly work! let us know what happens

008bond said:
Download and install flashtool.
Click to expand...
Click to collapse
Are we talking about the same flashtool?
When I go to the official page: http://developer.sonymobile.com/services/flash-tool/how-to-download-and-install-the-flash-tool/
flashtools is fact called "emma" and does not have a driver folder.
Official Sony flashtool website said:
How to download and install the flash tool
The flash tool for Xperia™ is actually called Emma when you install it in this Beta version, and it runs on all Windows computers.
Default path in Windows 64 bit is: “C:\Program Files (x86)\Sony Mobile\Emma\”
Default path in Windows 32 bit is: “C:\Program Files\Sony Mobile\Emma\”
Click to expand...
Click to collapse

profete162 said:
Are we talking about the same flashtool?
When I go to the official page: http://developer.sonymobile.com/services/flash-tool/how-to-download-and-install-the-flash-tool/
flashtools is fact called "emma" and does not have a driver folder.
Click to expand...
Click to collapse
You can get the version I use here
Flashtool website

008bond said:
You can get the version I use here
Flashtool website
Click to expand...
Click to collapse
Thank a lot man!!!
It worked.

indycar said:
Have you tried drivers that come with flashtool (you need to tick them at install)
[email protected]
Click to expand...
Click to collapse
profete162 said:
Thank a lot man!!!
It worked.
Click to expand...
Click to collapse
Thats what i was talking about. My bad if we didn't understand eachother
[email protected]

indycar said:
Thats what i was talking about. My bad if we didn't understand eachother
[email protected]
Click to expand...
Click to collapse
The big confusion was due to the flashtoll name that is also a tool released by Sony (see link I posted)

help unlocking bootloader

hey guys,
hopefully someone can help me, i'm trying to unlock my bootloader to install custom kernels.
here is when i think it goes wrong:
i'm using sony's official method but when i connect the phone in fastboot mode the computer doesn't ask for drivers like it should (says in instructions).
so i can't choose the modified driver that i've downloaded from the instructions.
thanks in advance!

you may already have it installed if you have installed flashtool.
I suggest deleting all sony/adb/phone applications on your computer, rebooting, and starting again

gregbradley said:
you may already have it installed if you have installed flashtool.
I suggest deleting all sony/adb/phone applications on your computer, rebooting, and starting again
Click to expand...
Click to collapse
that's correct indeed,
damnit.. i'm going to try it..

gregbradley said:
you may already have it installed if you have installed flashtool.
I suggest deleting all sony/adb/phone applications on your computer, rebooting, and starting again
Click to expand...
Click to collapse
even after a fresh install of my computer i can't get it to work.
i searched on google and found out that there are some issues with windows 8.
but after following specific instructions on windows 8 it still isn't working.
then i took an old windows vista computer from the attic and tried it with that.
it atleast asks for drivers but when i get the option to select the drivers myself it instantly disappears because the phone only stays in fastboot for about 10 seconds.
only thing i can think of is installing XP on my old system but is it normal it stays in fastboot for only 10 seconds? then it switches to charging mode.
unlock bootloader allowed is yes!

Download and install flash tool.
Run drivers.exe from the install folder.
Choose fastboot, flashmode and TX drivers.
Then try again for unlocking
Sent from my LT30p using xda premium
EDIT
W8 is a known problem with drivers. That's why is was failing before. Vista or W7 should work fine.

gregbradley said:
Download and install flash tool.
Run drivers.exe from the install folder.
Choose fastboot, flashmode and TX drivers.
Then try again for unlocking
Sent from my LT30p using xda premium
EDIT
W8 is a known problem with drivers. That's why is was failing before. Vista or W7 should work fine.
Click to expand...
Click to collapse
in the mean time i've read somewhere to use flashtool indeed.
got the drivers installed on my w8 system with flashtool, now the phone stays in fastboot (blue light)
then my next problem :laugh:
Open a command window and go to the tools folder within the Android SDK folder.
Enter fastboot.exe -i 0x0fce getvar version, and verify that you get a response back (for example "0.3"). This means your device is connected properly.
there is no fastboot.exe in the tools folder of sdk..
there is one in some folder of flashtool, can i use that one to complete the last point of the instruction?

Make sure you are running Google USB Driver package revision 4 or higher in your Android SDK
Click to expand...
Click to collapse
That is from step 8.
Did you download the google bit of the sdk?
EDIT
You could try this as well
minimal_adb_fastboot_v1.1.3_setup.exe - 2.12 MB

gregbradley said:
That is from step 8.
Did you download the google bit of the sdk?
EDIT
You could try this as well
minimal_adb_fastboot_v1.1.3_setup.exe - 2.12 MB
Click to expand...
Click to collapse
i finally found it.. it's not in tools folder anymore but platform tools.
i'm going to try again now..

Pollie81 said:
i finally found it.. it's not in tools folder anymore but platform tools.
i'm going to try again now..
Click to expand...
Click to collapse
yes..it has been moved. I forgot that myself

gregbradley said:
yes..it has been moved. I forgot that myself
Click to expand...
Click to collapse
it took a while and some extra grey hair but it's done..
i guess... it restarts and the phone went back to stock.
first i'm going to watch LA Ink on tv and then going to try to restore my backup and flash a custom kernel.
many thanks for your help! we got it working!
:good:

[Q] Flashing custom kernel

I need help! This is my first time I am doing this so I need all the help I could get!
I am planning to flash a custom kernel.(maybe later custom ROM,but for now only kernel) So, I know I have to unlock bootloader, install CMW and then flash. I see there are many tutorials so that will not be a problem(I hope) When I unlock bootloader I lose all my apps and data so I would like to backup it. I have TB but I am not quite sure how to operate it. Here is my explanation: I open TB, tick "Backup all user apps+system data", let it run and then what? Is there any folder on my phone that I should copy to my PC and then copy it back to my phone after I unlock bootloader? Question is, how do I backup and restore ALL of my data(apps,contacts,pictures,music,videos etc..)?
Second question is about ADB. I dont think I understand it fully. It says I have to have working and updated ADP and that is something I have to install. But I dont understand how to instal it. I got ADB in root folder for JB,someone told me that I could find it there. But how do I install it? In procedure for unlocking bootloader it says:"if you have the path to your adb defined" What does that mean? Question is, how do I install ADB and how do I use it for unlocking bootloader and flashing CMW,kernels etc..??

First part is ADB Driver
brunek said:
I need help! This is my first time I am doing this so I need all the help I could get!
I am planning to flash a custom kernel.(maybe later custom ROM,but for now only kernel) So, I know I have to unlock bootloader, install CMW and then flash. I see there are many tutorials so that will not be a problem(I hope) When I unlock bootloader I lose all my apps and data so I would like to backup it. I have TB but I am not quite sure how to operate it. Here is my explanation: I open TB, tick "Backup all user apps+system data", let it run and then what? Is there any folder on my phone that I should copy to my PC and then copy it back to my phone after I unlock bootloader? Question is, how do I backup and restore ALL of my data(apps,contacts,pictures,music,videos etc..)?
Second question is about ADB. I dont think I understand it fully. It says I have to have working and updated ADP and that is something I have to install. But I dont understand how to instal it. I got ADB in root folder for JB,someone told me that I could find it there. But how do I install it? In procedure for unlocking bootloader it says:"if you have the path to your adb defined" What does that mean? Question is, how do I install ADB and how do I use it for unlocking bootloader and flashing CMW,kernels etc..??[/QUa
All i'm telling you is about 4.1.2 Stock Rom rooting(this is how i do.)
1.you have to install ADB Driver in your PC here is how--- http://www.youtube.com/watch?v=RDA8PpPSFuk&list=TLIAgURiKX4qMghWFKLbjAps47YTjdLoGx
2. everything is mentioned in that video Happy Rooting
Click to expand...
Click to collapse

ruznik said:
All i'm telling you is about 4.1.2 Stock Rom rooting(this is how i do.)
1.you have to install ADB Driver in your PC here is how--- http://www.youtube.com/watch?v=RDA8PpPSFuk&list=TLIAgURiKX4qMghWFKLbjAps47YTjdLoGx
2. everything is mentioned in that video Happy Rooting
Click to expand...
Click to collapse
I followed the instructions and I think I already have those installed.. There was no yellow exclaimation signs, it recognized my phone as a portable device. Does this mean I have all drivers installed that are needed for unlocking bootloader?

brunek said:
I followed the instructions and I think I already have those installed.. There was no yellow exclaimation signs, it recognized my phone as a portable device. Does this mean I have all drivers installed that are needed for unlocking bootloader?
Click to expand...
Click to collapse
you lose nothing by unlocking. unlocking means unlocking not wiping or reseting or formating.
adb is a mode you can enter the device. so the first time you do it , u need the adb fastboot files or the whole android sdk 32bit version. after that u can either enter adb mode from recovery option menu ,either again using adb fastboot.
the adb mode is a way to communicate with the phone using the pc. to do so , of course you need the pc to know when u enter adb mode. so for the pc to know that , just like with any device, it needs drivers. those are the adb drivers. u can either find the android drivers in the forum or download and install android sdk 32bit and inside the folder where you see the adb file ,create a cmd to easy open the cmd at that specific location.
you will need to bakup before you wipe or format all your data to install a new kernel + rom. if u only go for a kernel then u lose nothing, but u are not sure u will succeed in the first try , so .. backup them up to a cloud or external sd.
careful if u dont succeed with kernel , u will need lg support tool to restore the stock rom. if u go for a custom , u will just use same way in adb mode to install the rom.
edit: i dont know if u already have the drivers. open the cmd inside fastboot and write adb devices . if u see ur device then u r ok. try adb reboot bootloader and if it goes in adb mode then reboot and do the unlocking. dont forget the all in one toolkit. will help u now that u r a beginner in this.

kessaras said:
you lose nothing by unlocking. unlocking means unlocking not wiping or reseting or formating.
adb is a mode you can enter the device. so the first time you do it , u need the adb fastboot files or the whole android sdk 32bit version. after that u can either enter adb mode from recovery option menu ,either again using adb fastboot.
the adb mode is a way to communicate with the phone using the pc. to do so , of course you need the pc to know when u enter adb mode. so for the pc to know that , just like with any device, it needs drivers. those are the adb drivers. u can either find the android drivers in the forum or download and install android sdk 32bit and inside the folder where you see the adb file ,create a cmd to easy open the cmd at that specific location.
you will need to bakup before you wipe or format all your data to install a new kernel + rom. if u only go for a kernel then u lose nothing, but u are not sure u will succeed in the first try , so .. backup them up to a cloud or external sd.
careful if u dont succeed with kernel , u will need lg support tool to restore the stock rom. if u go for a custom , u will just use same way in adb mode to install the rom.
edit: i dont know if u already have the drivers. open the cmd inside fastboot and write adb devices . if u see ur device then u r ok. try adb reboot bootloader and if it goes in adb mode then reboot and do the unlocking. dont forget the all in one toolkit. will help u now that u r a beginner in this.
Click to expand...
Click to collapse
I tryed to unlock with All in one tool.. I followed insructions, it started to do something on my phone and when I clicked "yes"(for unlocking) it said "download mode" and on my pc opened up a window that said found new hardwer and that I installed. I clicked cancel and in the bottom right corner of my pc it said "hardwer installation failed your device might not work properly". My phone just was stucked in "download mode". What now? I removed my battery and everything workes fine..

brunek said:
I tryed to unlock with All in one tool.. I followed insructions, it started to do something on my phone and when I clicked "yes"(for unlocking) it said "download mode" and on my pc opened up a window that said found new hardwer and that I installed. I clicked cancel and in the bottom right corner of my pc it said "hardwer installation failed your device might not work properly". My phone just was stucked in "download mode". What now? I removed my battery and everything workes fine..
Click to expand...
Click to collapse
first thing to know , when u talk about a problem is to identify the problem and what the "machine" does. if u dont say that u followed this guide, you did that and now when u do that the machine does that... i cant say anything im not magician lol. so now whats the problem ? the phone is working and u just failed the unlocking ? u failed the kernel installation ? ?!??

u r slow extract adb , open cmd in there ( i dont know if mine works for u , because i created in linux, maybe u need to delete the cmd.exe and create new. )
open cmd there and write : adb reboot bootloader. it goes in adb mode ?!

kessaras said:
first thing to know , when u talk about a problem is to identify the problem and what the "machine" does. if u dont say that u followed this guide, you did that and now when u do that the machine does that... i cant say anything im not magician lol. so now whats the problem ? the phone is working and u just failed the unlocking ? u failed the kernel installation ? ?!??
Click to expand...
Click to collapse
:laugh: Ok,lets start again.. I downloaded All-in-one tool.. Opened it.. Connected my phone.. Press 2 for unlocking bootloader.. I was asked,on the phone, do I want to proceed with unlocking.. I clicked yes.. Red letters showed on the phone and they said "download mode".. At the same time, on my pc, window was opened that said "found new hardwer".. I clicked cancel and pop-up message appeared "hardwer installation canceled, your device might not work properly".. On the phone the read message was still there,nothing happened.. I took the battery out, turned my phone on and thats it. Nothing on the phone was lost but I didnt unlock bootloader.

kessaras said:
u r slow extract adb , open cmd in there ( i dont know if mine works for u , because i created in linux, maybe u need to delete the cmd.exe and create new. )
open cmd there and write : adb reboot bootloader. it goes in adb mode ?!
Click to expand...
Click to collapse
I cant open cmd.exe..

brunek said:
I cant open cmd.exe..
Click to expand...
Click to collapse
create new ... its in c:/windows/system32 ur cmd. copy it and paste it there

kessaras said:
create new ... its in c:/windows/system32 ur cmd. copy it and paste it there
Click to expand...
Click to collapse
It says: "deamon not running. starting it now on port 5027"
"deamon started succesfully
error:device not found
My phone was disconected..

brunek said:
It says: "deamon not running. starting it now on port 5027"
"deamon started succesfully
error:device not found
My phone was disconected..
Click to expand...
Click to collapse
oke. so you dont have adb drivers installed thats what u have to do now. here they are. force them in creating a new device.

kessaras said:
oke. so you dont have adb drivers installed thats what u have to do now. here they are. force them in creating a new device.
Click to expand...
Click to collapse
I clicked install.exe and nothing happened..
I dont know what does "force them in creating a new device" means..

brunek said:
I clicked install.exe and nothing happened..
Click to expand...
Click to collapse
this guy here who has written "install" in chinese english version , sais how to force the driver in

kessaras said:
this guy here who has written "install" in chinese english version , sais how to force the driver in
Click to expand...
Click to collapse
No men, I am lost.. I connected my phone, go to device manager, update driver,found "have disc" but I dont know what driver should I install from the folder you gave my. I dont know what to click on.. I have Win Xp..

brunek said:
No men, I am lost.. I connected my phone, go to device manager, update driver,found "have disc" but I dont know what driver should I install from the folder you gave my. I dont know what to click on.. I have Win Xp..
Click to expand...
Click to collapse
choose any .inf . all the .inf files in a driver, have information of the driver. choose the android adb whatever it will call it and install.

kessaras said:
choose any .inf . all the .inf files in a driver, have information of the driver. choose the android adb whatever it will call it and install.
Click to expand...
Click to collapse
Sorry man but I am not following..I dont have android adb, I have android usb.inf..

brunek said:
Sorry man but I am not following..I dont have android adb, I have android usb.inf..
Click to expand...
Click to collapse
can u click it then this inf file ? later on u will see the adb driver to choose it. i cant stay here in this post for hours and say click here , move the mouse there and click that , then click that.... u have to put some effort there and do some things without telling. just install that driver and execute the all in one toolkit and choose what u like.

kessaras said:
can u click it then this inf file ? later on u will see the adb driver to choose it. i cant stay here in this post for hours and say click here , move the mouse there and click that , then click that.... u have to put some effort there and do some things without telling. just install that driver and execute the all in one toolkit and choose what u like.
Click to expand...
Click to collapse
No man, it doesnt work. It says that it doesnt recognize drivers or something like that.. Never mind,thanks for your help.. I will try it this way:http://forum.xda-developers.com/showthread.php?p=42407269

are you done update to JB?If not then do it with flashing. kdz file,then root phone and then unlock bootloader.l have same issues like you
Sent from my HTC Explorer A310e using Tapatalk 2

[SOLVED]Help me about Unlocking bootloader

from this instruction
http://unlockbootloader.sonymobile.com/instructions
I;m stuck at 13.On your computer, you will be asked for drivers. Point to the usb_driver folder where you placed the android_winusb.inf-file, and select the Android Boot loader Interface-file. I cant install the driver eventhough I think I've done everything correctly
I've try both manually and automatically can someone help me please?I'm stuck for many hours now
Edit: My phone is XperiaTX (Lt29i) rooted lock bootloader JB4.1 with official rom and kernel
My PC in win8 x64

zzz017 said:
from this instruction
http://unlockbootloader.sonymobile.com/instructions
I;m stuck at 13.On your computer, you will be asked for drivers. Point to the usb_driver folder where you placed the android_winusb.inf-file, and select the Android Boot loader Interface-file. I cant install the driver eventhough I think I've done everything correctly
I've try both manually and automatically can someone help me please?I'm stuck for many hours now
Edit: My phone is XperiaTX (Lt29i) rooted lock bootloader JB4.1 with official rom and kernel
My PC in win8 x64
Click to expand...
Click to collapse
I recomend you to install flashtool and unlock the bootloader with it ("BLU") it is easier and faster,
To install the usb drivers I also got problems, do one thing this is how I got it to work.
connect the phone with fastboot button pressed, the PC will ask for drivers and will open the "new hardware assistant" do not allow it to install them automatically, do it manually and sellect the folder where you downloaded the drivers, in some point the phone will power off as it doesn´t get any response from PC (this is why it was not installing them properly in may case) just before pressing ok connect again in fastboot (and close the new prompt of "new hardware assistant" let the old one install the drivers and will do it properly.

Still have a problem with drivrer installation
I've try to install driver from.exefile in C:/flashtool/drivers
And I've done it with no error but I still cant install the"S1 Fastboot driver"
I dont know what to do so I try Unlock through Flashtool and I got this message(see the attached picture)

zzz017 said:
Still have a problem with drivrer installation
I've try to install driver from.exefile in C:/flashtool/drivers
And I've done it with no error but I still cant install the"S1 Fastboot driver"
I dont know what to do so I try Unlock through Flashtool and I got this message(see the attached picture)
Click to expand...
Click to collapse
You need to install the drivers after disabling driver signature enforcement in Windows 8. If I remember correctly, I got it working by just installing the Fastboot and TX drivers from Flashtool. I did it about a year ago, so I'm not sure if Flashtool can correctly unlock bootloader already (it couldn't when I did it), so I would suggest just using fastboot.exe the way it is described in the official Sony page.
By the way: are you sure your bootloader can be unlocked?

Mad Marty said:
You need to install the drivers after disabling driver signature enforcement in Windows 8. If I remember correctly, I got it working by just installing the Fastboot and TX drivers from Flashtool. I did it about a year ago, so I'm not sure if Flashtool can correctly unlock bootloader already (it couldn't when I did it), so I would suggest just using fastboot.exe the way it is described in the official Sony page.
By the way: are you sure your bootloader can be unlocked?
Click to expand...
Click to collapse
Sure:good:

Already unlocking the bootloader
from this thread >> http://forum.xda-developers.com/showthread.php?t=2095087
I recognize that I just forgot to tick the "Flashmode driver"and"Fastboot driver"