Hello cpmmunity,
Im new in xperia x8 forum bit i know i little bit about flashing because i was in o3d forum. Now i want to flash rom for my sis.
Yesterday i want to install cwm for xperia because i want zo fladh jellyblur, i put the cwm.tar in system/bin and give their rights, but i still cant boot in cwm why?
And must i flash cwm or can i use xrecovery?
Sent from my LG-SU760 using xda app-developers app
Hi,
And why is it fun?
Just root> unlock bootloader> flashthe kernel kernel (nAa/Oxydo-JB) if you want to Jelly Blur (CM10) rom what it takes to unlock the kernel
In this way, what you gave it a quick and convenient, and look closely and you can unlock the bootloader here on the forum you will find step-by-step instructions
Also good luck and best regards
Use x8toolbox
AW: Recovery
stamatis said:
Use x8toolbox
Click to expand...
Click to collapse
Thanks this is exactly what im searching for
Sent from my LG-SU760 using xda app-developers app
No problem
why install recovery and then again flash kernel when you can simply flash the kernel for cwm as tiestobunio said?
AW: Recovery
CnC-ROCK said:
why install recovery and then again flash kernel when you can simply flash the kernel for cwm as tiestobunio said?
Click to expand...
Click to collapse
I dont understand it right. Iam now back on stock because i bricked the phone.
What i did is root stock, after that i unlocked bootloader, then i installed cwm and then i want to install kernel for jellyblur but everytime i do that my phone bricks. How exactly i have to flash the kernel? After flashing kernel i format system and data like in instruction. I rebooted then phone without flashing jellyblur i think this is the problem. I have to fladh kernel then go in cwm formatting system and data and without exiting flashing jellyblur is this right?
Sent from my LG-SU760 using xda app-developers app
Itaka06 said:
I dont understand it right. Iam now back on stock because i bricked the phone.
What i did is root stock, after that i unlocked bootloader, then i installed cwm and then i want to install kernel for jellyblur but everytime i do that my phone bricks. How exactly i have to flash the kernel? After flashing kernel i format system and data like in instruction. I rebooted then phone without flashing jellyblur i think this is the problem. I have to fladh kernel then go in cwm formatting system and data and without exiting flashing jellyblur is this right?
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
You flash kernels with flashtool buddy
In the kernel there is cwm recovery installed. Lol
Sent from my E15i using xda app-developers app
AW: Recovery
kreatonn said:
In the kernel there is cwm recovery installed. Lol
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
I dont said in kernel is cwm... why you dont read before you post, plese dont post such a **** if you want to help help , i know enough about flashing but never flashed xperia x8 i flashed my o3d and there you flash the kernel after flashing rom.
stamatis said:
You flash kernels with flashtool buddy
Click to expand...
Click to collapse
Yes i flashed the kernel with flashtool and what i have to do exactly after that?
Sent from my LG-SU760 using xda app-developers app
AW: Recovery
Ahh and another thing kreatonn, i helped a lot of people in o3d flashing and i never said somethong again someone, now i ask 1 time a thing and there are people like you :banghead:
@everyone else my question is did i have to flash first kernel with flashtool and after that flash jellyblur with cwm ?
Sent from my LG-SU760 using xda app-developers app
Yes first flash the correct kernel and then the rom.
Sent from my E15i using xda app-developers app
AW: Recovery
Thanks i managed it, now im on jellyblur. Thanks to everyone who helped me.
My fault was that i flashed the kernel and then i tried to start in gb. I had to flash first rom
Thanks a lot to everyone
Sent from my LG-SU760 using xda app-developers app
Related
Sometime I want to return back old version, while I am using high version. EX: old version mini cm 6 2.2.1 and than update to mini cm 7 gingerdx 2.3.7 , and I want back mini cm 6 2.2.1...how can I do now??? It can be?? Please give some advice thanks so..hope reply
Sent from my E15i using XDA
Just do it like always.
Sent from my XPERIA using XDA Premium.
You mean restore from recovery???
Sent from my E15i using XDA
lyhengboy said:
Sometime I want to return back old version, while I am using high version. EX: old version mini cm 6 2.2.1 and than update to mini cm 7 gingerdx 2.3.7 , and I want back mini cm 6 2.2.1...how can I do now??? It can be?? Please give some advice thanks so..hope reply
Sent from my E15i using XDA
Click to expand...
Click to collapse
Here is what you have to do.
If you still have your MiniCM6 backup, restore it using a recovery. Full wipe, wipe cache and dalvik cache then power off your phone. Then, use Flashtool to flash back stock kernel.
If you do not have the backup, download MiniCM6, boot into recovery, full wipe, wipe cache nd dalvik cache, then flash MiniCM6. Power off and use Flashtool to flash stock kernel.
Done (hopefully)
Next time post in Q&A section.
Sent from my E15i using Tapatalk 2
What do u exactly using now and what do u exactly want to flash?
Which kernel are u using?
Sent from my XPERIA using XDA Premium.
And u better post in q&a next time and use search button plzzzzz.
Sent from my XPERIA using XDA Premium.
lyhengboy said:
Sometime I want to return back old version, while I am using high version. EX: old version mini cm 6 2.2.1 and than update to mini cm 7 gingerdx 2.3.7 , and I want back mini cm 6 2.2.1...how can I do now??? It can be?? Please give some advice thanks so..hope reply
Sent from my E15i using XDA
Click to expand...
Click to collapse
So you want MiniCM 6 2.2.1 back ? Am I right ? And currently you are on GingerDx ?
I think he means minicm7
Sent from my XPERIA using XDA Premium.
SpyderX said:
Here is what you have to do.
If you still have your MiniCM6 backup, restore it using a recovery. Full wipe, wipe cache and dalvik cache then power off your phone. Then, use Flashtool to flash back stock kernel.
If you do not have the backup, download MiniCM6, boot into recovery, full wipe, wipe cache nd dalvik cache, then flash MiniCM6. Power off and use Flashtool to flash stock kernel.
Done (hopefully)
Next time post in Q&A section.
Sent from my E15i using Tapatalk 2
Click to expand...
Click to collapse
I already told it at first
Sent from my XPERIA using XDA Premium.
I don't know. I think the question should be more clear
I'm sorry for that, I don't know and don't understand about flash tool or flash kernel..I'm really don't understand, I try to find answer and still don't know...could you explain me? Why do we do??
Sent from my E15i using XDA
First tell me which rom do you want to flash ?
We do the flashtool stuff if we want to install a kernel or sometimes rom.. But you can install rom through recovery also.
Look we use flashtool to:
1-flash new kernels
2-install recovery on stock kernel.
3-rooting the phone
4- unlocking the bootloader (last version)
5-installing apps.
6-creating bundles if we want to restore Eclair
----------//-------
To flash a new ROM:
if your bootloader is unlocked u flash a new kernel and then using recovery u flash the Zip file which is the ROM.
If u cannot unlock your bootloader then u cannot change your kernel and must use ROMS which support stock kernel.
----/////-----------
Sent from my XPERIA using XDA Premium.
Well he can use xrecovery if unlocking bootloader is not possible (?)
Did I tell anything wrong?
Yes he should use Xrecovery to flash new ROMs.
But he can't change the kernel or the phone will be bricked (softly)
Sent from my XPERIA using XDA Premium.
Oh yes..Lets see if he can unlock his BL or not
You didn't say anything wrong
If u don't know about flashtool this means that you are in stock kernel....
Two ways
First if you had made a backup with cwm you can restore it with cwm,that will replace the current rom with the one you had backed up
second,if you haven't made backup then install your old rom just as you installed it first time,put it in SD,go to cwm or xrecovery ,full wipe,wipe dalvik, install zip from SD....
Sent from my X8 using xda premium
stamatis16 said:
If u don't know about flashtool this means that you are in stock kernel....
Two ways
First if you had made a backup with cwm you can restore it with cwm,that will replace the current rom with the one you had backed up
second,if you haven't made backup then install your old rom just as you installed it first time,put it in SD,go to cwm or xrecovery ,full wipe,wipe dalvik, install zip from SD....
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Maybe he never tried to unlock bootloader...and that's the reason he doesn't know anything about flashtool
Sent from my XPERIA using XDA Premium.
faraz_fireboy said:
Maybe he never tried to unlock bootloader...and that's the reason he doesn't know anything about flashtool
Sent from my XPERIA using XDA Premium.
Click to expand...
Click to collapse
Yes,what did I tell?!
If he is on stock kernel there is no need to tell him how to flash kernels......
Sent from my X8 using xda premium
I mean if he can unlock his bootloader he can flash kernels.
And I say maybe the reason his bootloader is unlocked is that he never tried to unlock it since he is a noooooob.
Sent from my XPERIA using XDA Premium.
Dear friends,
I always stuck at SE logo whenever I try to install custom rom. Here is what I do:
1. Root My stock 2.1 with Flashtool
2. Install Busybox with flash tool
3. Copy xrecovery's 3 files to system/bin
4. Restart in xrecovery and Choose Install custom zip
5. After installation, I reboot and stuck!!!
I have tried "MiniCM7-2.2.1-shakira" and "GingerDX-v029-shakira.zip"
Any Help?? I dont want to unlock my bootloader.
Thnx
"MiniCM7-2.2.1-shakira" and "GingerDX-v029-shakira.zip" uses custom kernel.must on unlockbootloader
use gingerdx v29 for stuck
sent from my x8™ using gingerDX®
Did you do a full wipe?
Skickat från min ST18i via Tapatalk 2
Find some help here ... don't use xrecovery, cwm is better ... and use gingerDX stock... my recommendation
http://forum.xda-developers.com/showthread.php?t=1932560
CWM recovery needs bootloader to be unlocked??
Jahanzaib Irfan said:
CWM recovery needs bootloader to be unlocked??
Click to expand...
Click to collapse
No,its like xrecovery
So,use cwm,full wipe before installing and check(at the about phone) your baseband,it should be like this, xxx15,if its not, update it with pccompanion or flashtool
Sent from my X8 using xda premium
Thnx to all, you made my day Guyzz... Blessings!!!
Jahanzaib Irfan said:
Thnx to all, you made my day Guyzz... Blessings!!!
Click to expand...
Click to collapse
goodluck.and be sure to use a custom rom for stock kernel.
sent from my x8™ using gingerDX®
playjun said:
goodluck.and be sure to use a custom rom for stuck.
sent from my x8™ using gingerDX®
Click to expand...
Click to collapse
Its not "for stuck",its "for stock (kernel)"
Sent from my X8 using xda premium
thanks for correction
sent from my x8™ using gingerDX®
One more thing friendz, after installing GingerDX for stock, i am unable to overclock my phone from cyanogenmod settings. Min and Max values are just faded and i cant change them. Any Solution?
Have you flashed baseband xxxx15??? i didnt saw that in the steps you provided...
Steven87 said:
Have you flashed baseband xxxx15??? i didnt saw that in the steps you provided...
Click to expand...
Click to collapse
No, how to do this?? is there any risk of hard brick?
No just find the baseband file and flash it on flashtool
Sent from my X8 using xda app-developers app
i recommend to you to start from scratch, 2.1, root, flash baseband, install busybox, install CWM recovery, the full wipe and flash rom, you can flash the baseband with flashtool, and i think there is no risk, i have done it several times, the baseband xxxx15 is required to flash custom roms.
Jahanzaib Irfan said:
No, how to do this?? is there any risk of hard brick?
Click to expand...
Click to collapse
If you have installed gingerdx there is no need to flash baseband xxx15 because you already have it!
Sent from my X8 using xda premium
stamatis16 said:
If you have installed gingerdx there is no need to flash baseband xxx15 because you already have it!
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Why cant I overclock??
Jahanzaib Irfan said:
Why cant I overclock??
Click to expand...
Click to collapse
Did you flash the overclock module? If yes,use setcpu or similar apps to change frequency
I don't recommend overclock,but if you want it that much...its your phone after all...
Sent from my X8 using xda premium
Btw when you get all of that done you can do these steps to have better battery life
http://forum.xda-developers.com/showthread.php?p=19938469#post19938469
http://forum.xda-developers.com/showthread.php?t=942241
You stuck on Sony ...... logo because all new ROMS need to be installed from CWM and not from xRecovery :laugh:
My friend have the p970, and he talk me to install a custom rom for he, but any rom need custom kernel. In my xperia x8, to install a custom kernel, need a uncloked bootloader and a flash process in pc. But i see a video showing a instalation of cm10 on p970, without flashing a new kernel with other program, but the kernel change just with a zip instalation.
How can i install cm10 for p970 without unklocking bootloader? Im cofused.
Sent from my X8 using xda premium
Installing a rom on P970 its a pretty simple.
You just need root and recovery... to install a rom just do a full wipe and then install the .zip, search on general section about how to make root.
Just this? Isnt necessary to unclock bootloader to flash cm10 and flash a kernel with a program?
Sorry for noob question and bad english
Sent from my X8 using xda premium
jucazastrow said:
Just this? Isnt necessary to unclock bootloader to flash cm10 and flash a kernel with a program?
Sorry for noob question and bad english
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Nope, because our bootloader is unlocked. Kernel comes with the flashable .zip file, so no need for additionally flashing anything after
Sent from my LG-P970 using xda app-developers app
Uncloked bootloader native?! You guys are looky! Really thanks, my doubt is finish.
Sent from my X8 using xda premium
Helloo Everybody..
I will be really grateful if someone found a solution to my problem...
I know that this is not a support site, but a developers world, but after searching and googling, i couldnt help my self.
Mods can close and delete this thread if they want.
My question is that if I flash a Gingerbread kernel(nAa or Alfs) on ECLAIR 2.1...wont it create problems..such as force closing or rebooting sort of problems??
Secondly I read SpydeX thread of unlocking bootloader..i got all the tools ready, but the thread doesnt mentions anything about entering into recovery via kernel on ECLAIR 2.1... the guide just tells that after flashing entr into recovery and flash the rom.
I tried this trick on my friends X8, but no success..
Thanxx in advance
If you flash a custom kernel at the eclair while you have locked bootloader,you will have bootloop(it wont boot,but you can easily fix it),if you have unlocked your bootloader it will be fine
As for your second question,you unlock your bootloader,you flash the kernel(which contain cwm),you enter recovery(cwm),and you flash the rom.
Sent from my X8 using xda premium
U mean that after i unlock my bootloader and flash the ALFS OR NAA kernel on Eclair 2.1...it will work fine???? And i can use the eclair os normally???
Sent from my X8 using xda app-developers app
HemdonG said:
U mean that after i unlock my bootloader and flash the ALFS OR NAA kernel on Eclair 2.1...it will work fine???? And i can use the eclair os normally???
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
Yep,at least gb kernels
Sent from my X8 using xda premium
afaik custom kernels will not work on stock rom.
Sent from my rooted tomato using tapatalk
HemdonG said:
U mean that after i unlock my bootloader and flash the ALFS OR NAA kernel on Eclair 2.1...it will work fine???? And i can use the eclair os normally???
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
No he's got it wrong.
1. You can't flash custom kernels on a locked rom flashtool won't allow it.
2. Flashing a custom kernel on stock 2.1 will cause it to bootloop, what you'd normally do is enter recovery and flash a rom that works with the kernel.
Sent from my GT-I9000 using xda premium
No,users have reported that custom kernels work with stock rom(I remember very clear a user who used naa kernel with stock rom)
Maybe older versions...
If I'm wrong then I apologize
Sent from my X8 using xda premium
stamatis16 said:
No,users have reported that custom kernels work with stock rom(I remember very clear a user who used naa kernel with stock rom)
Maybe older versions...
If I'm wrong then I apologize
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Trust me, no kernels will work with stock 2.1
Sent from my GT-I9000 using xda premium
stamatis16 said:
No,users have reported that custom kernels work with stock rom(I remember very clear a user who used naa kernel with stock rom)
Maybe older versions...
If I'm wrong then I apologize
Sent from my X8 using xda premium
Click to expand...
Click to collapse
When you open naa kernel thread hou are going to read: THIS IS YOUR KERNEL FOR GB/ICS/JB
Kernel for stock need to be signed by Sony
Sent from my E15i using xda premium
Hi guys. Today I tried upgrading GingerDX from v030 to v031b but I mistakenly downloaded (and flashed) Alfs/nAa instead of Stock kernel.
Now the phone screen won't pass the Sony Ericsson boot scree... I can't find the key combinations to enter into CWM recovery menu. Is there any other way I can flash the proper ROM using Flashtool? I found this guide but I don't want to go back to the stock kernel (if possible).
Thank you!
You mean to. Say stock rom??
You are already on stock kernel...
& no other option you must follow that guide if you can't unlock bootloader!
see boot animation without rebooting
Gogeta said:
You mean to. Say stock rom??
You are already on stock kernel...
& no other option you must follow that guide if you can't unlock bootloader!
see boot animation without rebooting
Click to expand...
Click to collapse
Right, I already have the stock kernel, but I flashed Alfs/nAa ROM instead of the Stock one (from the download options) and now the phone won't pass the bootloader... Will try that guide since I can't enter CWM recovery using the key combinations I found
See the second post of the following thread
http://forum.xda-developers.com/showthread.php?t=1481630
stamatis said:
See the second post of the following thread
http://forum.xda-developers.com/showthread.php?t=1481630
Click to expand...
Click to collapse
He already stated that link in OP
see boot animation without rebooting
Gogeta said:
He already stated that link in OP
see boot animation without rebooting
Click to expand...
Click to collapse
Oops,my mistake, I didn't notice there were a link.
Ok, looks like there's no other way than going back to stock :crying:
Thanks anyway guys!
Re-flash back to stock 2.1, root, recovery and ROM again.
Sent from my LT26i using Tapatalk 2
Mistev said:
Re-flash back to stock 2.1, root, recovery and ROM again.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Yes,its not harder isn't it? really easy and fast way. you do this couple of times and you automatically capture the method easily
i unbricked my soft brick X8,root and install Xrec without guide for 4 times.that nice
sorry for my baddest english.
I re-installed 2.1 e15a stock kernel, then xRecovery and tried with 31b and 30 to no avail (SE -> GingerDX logo loop).
I can't figure out what I'm doing wrong...
Sent from my Galaxy Nexus using xda app-developers app
vazquezjm said:
I re-installed 2.1 e15a stock kernel, then xRecovery and tried with 31b and 30 to no avail (SE -> GingerDX logo loop).
I can't figure out what I'm doing wrong...
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
1. Use CWM to flash GDX!
2. Wipe dalvik cache that you forgot..
Sent from my E15i using xda app-developers app
Gogeta said:
1. Use CWM to flash GDX!
2. Wipe dalvik cache that you forgot..
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
Where can I downloadCWM? I couldn't find it and that's why I used xrecovery
Sent from my Galaxy Nexus using xda app-developers app
Will xtoolbox do the job?
It I'll be great if everything comes from one place instead of having to root using guide A, install CWM from guide B to end up using XDA's guide to install GDX. Just un idea, specially for noobs
Sent from my Galaxy Nexus using xda app-developers app
X8 toolbox gives almost everything
Sent from my E15i using xda app-developers app
Well, when I softbricked my X8, I never used my PC to unbrick it. I will just go into the recovery and flash a working rom. Problem solved..
But I can't figure out why he is sayig he can't go into the recovery. The button patterns remains the same no matter what rom you are on or what kernel you use. But I can be wrong.
Anyway did you do all these steps:
# Wipe Full System
# Wipe Cache, Dalvik-Cache
These steps are very important. But we often forget them.
Dude.....
Sometimes can't get into recovery while on stock kernel
Happened 3 times to me
Sent from my X8 using xda app-developers app
Maybe the op is downloading gdx for custom kernel...
dagger said:
Maybe the op is downloading gdx for custom kernel...
Click to expand...
Click to collapse
If he downloaded for custom kernel ...
he can't see the GDX logo
only 'Sony Ericsson'
Sent from my X8 using xda app-developers app
We dont see the sony ericsson logo on custom kernels..
it is seen only on stock kernel.
so there is a high possibility that op downloaded the wrong rom..
Gogeta said:
If he downloaded for custom kernel ...
he can't see the GDX logo
only 'Sony Ericsson'
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
if you use rom for stock kernel you can see the GDX logo...that is part of boot animation. alfs shows WLAN version not GDX. the Sony Ericsson logo is of stock kernel. so if you flash a rom for custom kernel you will still see that logo
it is possible (as dagger said) that OP downloaded rom for custom kernel.