Database Develop

After flashing p1000. I got black screen & flash led on

I got problem with galaxy tab after flashing new rom (may be not suitabe for my device p1000) the sceen come black the flash led on all the time & the device not working at all . anyone can help me to resuscitate my galaxy tab GT-P1000

Maybe giving more info would help us to help you.
What was your firmware?
Which firmware you are trying to flash?
Are you using Odin? Heimdall ?
Etc etc.
Sent from my GT-I9000 using XDA App

You should give us more info, as stated above. However, you've already tried reflashing, haven't you?
Sent from my GT-P1000 using XDA Premium App

hi
my old firmware p1000jpjm5 the new one tried to flash XXJVB 2.2.3
useing odin3 1.7 after flashing this rom my galaxy turne on black screen
and flash light on thanks.

Been reading around and the only thing i found on your problem was caused by flashing the galaxy tab with galaxy s software
It should restore in download mode using the right flash for your tab

same problem, any solution ?

What problem r u having? If u have the same problem with OP please provide more info like 2nd post..u could try overcome method to restock your tab
Sent from my GT-P1000 using xda premium

dorsumsallae said:
What problem r u having? If u have the same problem with OP please provide more info like 2nd post..u could try overcome method to restock your tab
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
after i flashed my p1000 with GB-Stock-Safe-v5.zip etc just like the tutorial, my phone just blank n the flash light automaticly on if i power it on or i plug the usb cable, but it doesn't connect with the odin, i already download GalaxyTabP1000-JQ1-One-Click ( heimal ) but same problem , it doesnt connect with the software, any solution? or the battery empty? i already remove the battery n charge it with desktop charger, but still same...

are you 100% sure you own a P1000 and not a P1000N or P1000L ?
was the Odin flash 100% successful
The symptom is exactly like a N/L version flashed with a P1000 firmware.
Edit: when you say flash light, it is the capacitive buttons or really the LED flash light near the rear camera?

priyana said:
are you 100% sure you own a P1000 and not a P1000N or P1000L ?
was the Odin flash 100% successful
The symptom is exactly like a N/L version flashed with a P1000 firmware.
Edit: when you say flash light, it is the capacitive buttons or really the LED flash light near the rear camera?
Click to expand...
Click to collapse
how can i make sure mine is p1000 not n / l , n if i flashed wrong firmware what is the solution?

Not sure how to check, the back of the device didn't say so? You need to find the right firmware, it is available on sammobiles website.
Hey, you said you remove the battery and charged it with desktop charger?
What kind of charger is that?
Sent from my GT-I9300 using xda app-developers app

priyana said:
Not sure how to check, the back of the device didn't say so? You need to find the right firmware, it is available on sammobiles website.
Hey, you said you remove the battery and charged it with desktop charger?
What kind of charger is that?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
nothing displayed on the backside of device , so, how can i know? then , what should i do?
yea.. desktop charger .. like this

The original is rated 2A.
Maybe you should charge your longer, 8hr or more, then try Odin again.
BTW, if L/N device flashed with P1000 you can still use its recovery.
So if Odin can detect, reflash the GB stock safe, make sure it is completed.
Then flash overcome kernel,
Then use its cwm recovery to flash cm for p1n.
You sure back bottom no marking?
Mine is T849 and it says so there.
Sent from my GT-P1000 using xda app-developers app

Model no. Should be bottom back of your tab..for me it gt-p1000..try what priyana said coz if it N/L model i cant help much maybe priyana can guide u better..
Sent from my GT-P1000 using xda premium

priyana said:
The original is rated 2A.
Maybe you should charge your longer, 8hr or more, then try Odin again.
BTW, if L/N device flashed with P1000 you can still use its recovery.
So if Odin can detect, reflash the GB stock safe, make sure it is completed.
Then flash overcome kernel,
Then use its cwm recovery to flash cm for p1n.
You sure back bottom no marking?
Mine is T849 and it says so there.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
yeah.. nothing displayed, okay,, i'll try it again, is the gb stock safe can be used for all type? ( L / N / P1000 )
btw, my tab is anycall , do u know which one is it?
dorsumsallae said:
Model no. Should be bottom back of your tab..for me it gt-p1000..try what priyana said coz if it N/L model i cant help much maybe priyana can guide u better..
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
model number? can we detect it with model no. ?

Never had experience with anycall. It is a Korean one, some has posted here before. Never seen any confirmation which one it most resembles.
Sent from my GT-I9300 using xda app-developers app

priyana said:
Never had experience with anycall. It is a Korean one, some has posted here before. Never seen any confirmation which one it most resembles.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
hey,, right now, the condition of my tab is the device connected with the computer, then i flashed with another stock firmware, then the tab still won't boot, but connect with the odin , any solution? or i try the method that using gb stock again?

bagir88 said:
hey,, right now, the condition of my tab is the device connected with the computer, then i flashed with another stock firmware, then the tab still won't boot, but connect with the odin , any solution? or i try the method that using gb stock again?
Click to expand...
Click to collapse
Hello guys, thanks for your support and excuse me for my english but i'm the same problem with my GT-P1000(i've seen it on the back of my tab !). I've let it charging several hours and try to connect it to Odin which doesn't recognize it ! I got always a black screen and the rear flash led flashing flashing and flashing when it's connected to charger or my PC or when i keep pushing the power button ! Before the brick state i've follow the bad tutorial to root my tab and i've flashed a firmware for galaxy tab 10.1 inch ! Please, help me !:crying:

My gt p1000 went dead with led light permanetly on afrer flashing with odin
Here are my detail.
Odin v1.83
firmware P1000XWJQ8_P1000PHNJQ1_P1000XXJPZ_HOME.tar
pit :gt-p1000_mr
When i first root,its doing bootlloop but i can still enter downloading mode so I decide to flash the rom as advice by one tutorial.so i got stuck with this ,that is the tab went dead and the flash led light permanetly on.
please i need help.
Thanks in advance
Kingdavid423

KINGDAVID423 said:
Here are my detail.
Odin v1.83
firmware P1000XWJQ8_P1000PHNJQ1_P1000XXJPZ_HOME.tar
pit :gt-p1000_mr
When i first root,its doing bootlloop but i can still enter downloading mode so I decide to flash the rom as advice by one tutorial.so i got stuck with this ,that is the tab went dead and the flash led light permanetly on.
please i need help.
Thanks in advance
Kingdavid423
Click to expand...
Click to collapse
Restock gb-v5 first using odin or heimdall. Try installing cm10.1 or cm10.2 rom instead.

[Q] tab bricked?or is it?

I had issues with my Verizon tab. I flashed the rom back to stock with himdall. It now has black screen unless I plug it in then the camera flash stays on. My windows 7 laptop can still connect to it. I reflased again the light goes of then back on. Want to get it back to stock but don't know and think maybe its permanently bricked?I can not get it to boot or do anything.

xoomer360 said:
I had issues with my Verizon tab. I flashed the rom back to stock with himdall. It now has black screen unless I plug it in then the camera flash stays on. My windows 7 laptop can still connect to it. I reflased again the light goes of then back on. Want to get it back to stock but don't know and think maybe its permanently bricked?I can not get it to boot or do anything.
Click to expand...
Click to collapse
It's not bricked. Re-flash it with Odin.

Where do I find the files to do so??wow what a quick reply!thanks!

Verizon is CDMA correct?
I don't know if re-stocking using this will work?
Code:
http://88.191.119.59/GB-stock-safe.zip
Someone can help me with this? I'm not sure if that is GSM only.

Tried that now tab wont do any thing at all computer does not find it now

xoomer360 said:
Tried that now tab wont do any thing at all computer does not find it now
Click to expand...
Click to collapse
Woah buddy I didn't say go ahead and flash it. So you put it in download mode first and then flashed that?

There was no way to get into download mode. I flashed it but this time the camera flash went off and stayed off.

So how did you flash it then if not in DL mode?

Brick Samsung Galaxy tab GT P1000
Buried said:
Verizon is CDMA correct?
I don't know if re-stocking using this will work?
Code:
http://88.191.119.59/GB-stock-safe.zip
Someone can help me with this? I'm not sure if that is GSM only.
Click to expand...
Click to collapse
Samsung Galaxy Tab GT P1000 .
Root done.Unlock.
CWM install.
I was instaling a Rom from Rom Manager and then the device turn itself off.
I forget to connet to power and I was almost without energy.
Now i only have a SAMSUNG GALAXY TAB screen and then turn off.
And also have the download mode working.
Cannot turn on the Recovery mode.
In the beginning also appears the battery but look´s like it is not charging, green part dont appear.
I was trying to trougth ODIN install a stock Rom but Odin dont recognize the device.
With the device connect to the PC ODIN recognize it .
Can someone help on here , please ?
Thank you.

Use overcome method. Follow my signature.
Sent from my GT-P1000 using xda app-developers app

vitormcsoares said:
Samsung Galaxy Tab GT P1000 .
Root done.Unlock.
CWM install.
I was instaling a Rom from Rom Manager and then the device turn itself off.
I forget to connet to power and I was almost without energy.
Now i only have a SAMSUNG GALAXY TAB screen and then turn off.
And also have the download mode working.
Cannot turn on the Recovery mode.
In the beginning also appears the battery but look´s like it is not charging, green part dont appear.
I was trying to trougth ODIN install a stock Rom but Odin dont recognize the device.
With the device connect to the PC ODIN recognize it .
Can someone help on here , please ?
Thank you.
Click to expand...
Click to collapse
Had this same issue and tried overcome method. after flashing screen is off and only capacitive buttons light up. I tried charging it but it doesn't display the battery charging icon. Any help would be appreciated

Luisoman2000,
Sounds like you have other than P1000
Maybe a P1000N or P1000L of the Latin America?
If so, you need to seek out alroger's site for L/N kernel.
Sent from my GT-P1000 using xda app-developers app

priyana said:
Luisoman2000,
Sounds like you have other than P1000
Maybe a P1000N or P1000L of the Latin America?
If so, you need to seek out alroger's site for L/N kernel.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
yup, its a p1000n. im charging the tab right now, tried connecting it to pc and it was recognized by odin so i guess those are good news.

Definitely.
You can use overcome method to restock, but you will need humberos kernel to get it boot up.
Let me know if you can find the right post.
Btw you don't need to refresh the whole thing. Just need the right kernel.
I am only speaking from what I read, no first hand experience.
Sent from my GT-I9300 using xda app-developers app

Not really sure if i have the right thread, think you can point me in the right direction?
Sent from my PantechP9070 using xda app-developers app

Giving you this link to explore, but is your final destination ICS ( CM9) or JB ( CM10) or you prefer just GB?
http://cafe-ti.blog.br/1524~sgt7-p1000-android-ics-cm9-mtd.html
The blog says overcome method works, meaning you should be able to enter cwm and flash cm rom for p1n
Post back the outcome here. I am just curious how it goes.
Sent from my GT-I9300 using xda app-developers app

priyana said:
Giving you this link to explore, but is your final destination ICS ( CM9) or JB ( CM10) or you prefer just GB?
http://cafe-ti.blog.br/1524~sgt7-p1000-android-ics-cm9-mtd.html
The blog says overcome method works, meaning you should be able to enter cwm and flash cm rom for p1n
Post back the outcome here. I am just curious how it goes.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks!, for now i just want to make it work again but final destination is cm9.

luisoman2000 said:
Thanks!, for now i just want to make it work again but final destination is cm9.
Click to expand...
Click to collapse
can i use odin to flash the kernel or should i use heimdall? Heimdall gives me an error when flashing(libusb error:-12

luisoman2000 said:
can i use odin to flash the kernel or should i use heimdall? Heimdall gives me an error when flashing(libusb error:-12
Click to expand...
Click to collapse
Use heimdall 1.3.1 (later version may cause other issue) and you needed to use zadig.exe to install USB driver.
Odin I am not sure, it needs to be .tar format.
I don't know if taring a file make it OK to Odin. Never tried myself.
Sent from my GT-P1000 using xda app-developers app

Thanks for all the help. Manahed to find stock firmware for the tab and then used one of humeros cm9 roms. Tab is alive and well and running smoothly. Might upgrade it to a cm10 rom later on.
Sent from my PantechP9070 using xda app-developers app

[Q] How do I find out which country my galaxy note is from? Please help?

I recently got my phone back from a jtag repair man who left my phone in donwload mode, and I have no clue which stock rom to flash... what should I do? how can i be sure of the origin of the phone?

minnieman said:
I recently got my phone back from a jtag repair man who left my phone in donwload mode, and I have no clue which stock rom to flash... what should I do? how can i be sure of the origin of the phone?
Click to expand...
Click to collapse
This is what you need to folow..
http://forum.xda-developers.com/showthread.php?t=1424997
Flash gb rom via odin and all done
Sent from my GT-N7000 using XDA Premium App

sahilarora2003 said:
This is what you need to folow..
http://forum.xda-developers.com/showthread.php?t=1424997
Flash gb rom via odin and all done
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
So can I just use the open europe one? I know it's from europe, I just don't know specifically where.

minnieman said:
So can I just use the open europe one? I know it's from europe, I just don't know specifically where.
Click to expand...
Click to collapse
Yea. You can use it.. Just stick with the instructions.
Sent from my GT-N7000 using XDA Premium App

sahilarora2003 said:
Yea. You can use it.. Just stick with the instructions.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Ok, I did what you said, now it just goes to 'logo_ql.jpg' draw failed. It also wont let me get back into download mode, it just goes to this message. now what?
EDIT, nevermind, got it into download mode... guess i just need to keep trying different roms to figure out which one works?

You said your note came from repair and it was on download mode. I think it was NOT REPAIRED AT ALL. Country or region has nothing to do with manual flashing. You only need region when using kies to update.
Sent from my GT-N7000 using xda app-developers app

minnieman said:
Ok, I did what you said, now it just goes to 'logo_ql.jpg' draw failed. It also wont let me get back into download mode, it just goes to this message. now what?
EDIT, nevermind, got it into download mode... guess i just need to keep trying different roms to figure out which one works?
Click to expand...
Click to collapse
Tbere is no need to try different roms as every rom is like same. Not much difference. Maybe your device is hard bricked and writing isn't possible. Get your motherboard replaced.
Sent from my GT-N7000 using XDA Premium App

sahilarora2003 said:
Tbere is no need to try different roms as every rom is like same. Not much difference. Maybe your device is hard bricked and writing isn't possible. Get your motherboard replaced.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
I did get it working... however, I went to reflash because when I did a factory data reset in CWM and it hung at erasing the data. So I reflashed the same way and now it gets stuck at the splash screen but it does boot, just not all the way up. what do I do?
EDIT: nevermind! got it! just had to use the stock recovery to wipe the data partitiopn and now my note is working great! thanks for your guys help!!

minnieman said:
I did get it working... however, I went to reflash because when I did a factory data reset in CWM and it hung at erasing the data. So I reflashed the same way and now it gets stuck at the splash screen but it does boot, just not all the way up. what do I do?
EDIT: nevermind! got it! just had to use the stock recovery to wipe the data partitiopn and now my note is working great! thanks for your guys help!!
Click to expand...
Click to collapse
Don't ever wipe using stock ICS kernel. It will hard brick your device. I think now already got affected. Flash a safe kernel first then wipe.
Sent from my GT-N7000 using XDA Premium App

So I have a question. I had tried rooting my device and it failed into a soft brick. Previously I had jzo54k on there. Using Odin I installed the Poland software but it seemed to have failed because now I am not able to register on a network. I have an international version of the Note 2 that I am using in the US. Since I am not able to connect to a network I am lost as to what to try. Any suggestions on where to go from here?
---------- Post added at 01:22 AM ---------- Previous post was at 12:40 AM ----------
GeoJam3s said:
So I have a question. I had tried rooting my device and it failed into a soft brick. Previously I had jzo54k on there. Using Odin I installed the Poland software but it seemed to have failed because now I am not able to register on a network. I have an international version of the Note 2 that I am using in the US. Since I am not able to connect to a network I am lost as to what to try. Any suggestions on where to go from here?
Click to expand...
Click to collapse
Never mind... I got it. I had to update only via Kies. And then from there it pushed my original software. Thanks!

Stuck on Splash Screen. No recovery. Odin not able to flash roms.
sahilarora2003 said:
Don't ever wipe using stock ICS kernel. It will hard brick your device. I think now already got affected. Flash a safe kernel first then wipe.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Hi
My stock JB official unrooted rom suddenly went to a bootloop. I looked up online for solutions and flashed an official JB ROM for my phone and Odin failed to flash it. I tried Philz recovery but Odin failed to flash it. I got a yellow triangle which I was able to removie through Odin. Currently my phone is stuck on the splash screen. Recovery doesn't work. Odin fails when I try to reflash with a md5.tar file. Please experts help me with my problem. would really appreciate it.
Thanks in advance.

bricked my note, please help Tmobile note

OK, Stupid me for even trying to load roms on my note. I managed to finally root my note, used clock works rom manager to download a rom, tried to install it now my phone wont boot up. It just vibrates once says samsung and just loops. Like its restarting everytime. I can still boot into recovery with clock works recovery and enter download mode, I think I just need the stock rom and flash it through oden but I dont know where to get it. Please Help!!!

....
tried recovery through CWM, system recovered but still, phone will not boot. Just keeps restarting then samsung logo then reboots again and again.....ganna try advanced restor...

ok....
ok, restored boot, now restoring system, ganna go down the line and advanced restore everything I made a back up of before my little problem...will post results

Success! IM glad I backed up my entire phone before I started screwing around with roms! I guess I did not need you guys help after all. X) Oh what a little google research can do! Thanks anyway.
Sent from my SGH-T879 using xda app-developers app

Glad you could resolve this by you're self.I had something similar happen to me while trying to flash Blackstars ROM. Turned out to be a bad download of his ROM and I got stuck in boot loops zone lol. All I did was download the stock odex ROM from the Dev section and all went back to normal.
Sent from my SGH-T879 using xda premium

Please help me!!!
I have same problem with my T-Mobile Samsung galaxy note..
It won't turn on and cannot put download mode or recovery mode.
I think, flashed wrong ROM
Do you have any idea to get out of this situation.
Thanks
Sent from my SGH-T999 using xda premium

kim621973 said:
Please help me!!!
I have same problem with my T-Mobile Samsung galaxy note..
It won't turn on and cannot put download mode or recovery mode.
I think, flashed wrong ROM
Do you have any idea to get out of this situation.
Thanks
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
If you can't get into recovery or download mode you might be in a bit of a pickle. Recently did that to my GS3 and I had to send it back to Samsung. I would find and try a USB Jig first, that might get you into download mode so you can use Odin to flash stock firmware back onto the phone. Just do a google search for Samsung USB Jig.

Thank you for your advise:thumbup:lol
That is only way to unbricking the phone?
Sent from my SGH-T999 using xda premium

kim621973 said:
Thank you for your advise:thumbup:lol
That is only way to unbricking the phone?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Well that is the way you can do it, if the USB Jig gets you into download mode. If it doesn't, then you can have it JTaged. There are companies out there that offer JTag Service for some fee. Can't remember now but like 60-70 bucks maybe. Again, I'm sure it's just a google search away. Other than those two options I don't know if anything else, besides sending it back for warranty replacement.

Make a JIG, its' super easy. I made one to fix a friends Galaxy S2.
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/

mechanix619 said:
Make a JIG, its' super easy. I made one to fix a friends Galaxy S2.
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/
Click to expand...
Click to collapse
Great. this is exactly what I did. Couldn't remember the link. Didn't work for me GS3 though. That thing was hard bricked.

GT-P7300 Stuck on Loading...

I used Odin to download, but now the Tab is stuck as it just keeps saying loading...
I tried disconnecting the battery, but that didn't work.
Any ideas?
Thanks!

Golf Educator said:
I used Odin to download, but now the Tab is stuck as it just keeps saying loading...
I tried disconnecting the battery, but that didn't work.
Any ideas?
Thanks!
Click to expand...
Click to collapse
What did you try to download and do you have a custom recovery installed, twrp or cwm? With whatever recovery you have try doing a factory reset and wipes.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
What did you try to download and do you have a custom recovery installed, twrp or cwm? With whatever recovery you have try doing a factory reset and wipes.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Thanks for answering...
I believe I was trying to download a new CWM with odin. I'm not sure how to use a factory reset and wipes as I can't use anything on the GT, as it is stuck. As this point I am hoping that the new IC firmware will be available through Kies.
I can still use Odin from the PC through Kies, though.
Thanks again!
Regards,
Golf Educator: confused:

Does Odin recognize your device? If so you can flash the stock rom from sammobile.com. You need to extract the .tar.md5 file from the zip. Use 7-zip to do that
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
Does Odin recognize your device? If so you can flash the stock rom from sammobile.com. You need to extract the .tar.md5 file from the zip. Use 7-zip to do that
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Again, thanks for responding...
At this point I'm afraid of "Bricking it" before I can have a chance to update the firmware to IC. Hopefully that will be soon.
I really don't know what I am doing, and I have already screwed it up. The GT Honey Comb is working fine, but I can't do anything to upgrade it, internally, as everything is stuck within the GT!
At one point I was trying to upgrade to Jelly Bean, but now I'm just hoping to just get IC. If I can get the IC downloaded through Kies, I'm thinking that the new firmware upgrade using Kies will take care of things. What do you think?
I guess I can live without Jelly Bean.
But I'm willing to give something else a try, however, I would need detailed, step-by-step "For Dummies" directions on what I should do; and as kind as you are, I wouldn't want to ask you to do that?
Kind regards,
Golf Educator

Hi. Don't be scared of losing your device. Will try to walked you thru the process.. just to be more clearer. Can you write down all your device info such as current firmware that u r using? And also do tell us the region ( im XME -Malaysia) because sometimes not all the stock rom can be use to upgrade..
You may need :-
1- kies(for drivers)
2- cables
3- charge your tab to 80%
4- windows/os of ur pc or Mac
After you post all of the info. I or we will try our best to walk you thru the process
Sent from my GT-I9000 using xda app-developers app

BlackCl0udMY said:
Hi. Don't be scared of losing your device. Will try to walked you thru the process.. just to be more clearer. Can you write down all your device info such as current firmware that u r using? And also do tell us the region ( im XME -Malaysia) because sometimes not all the stock rom can be use to upgrade..
You may need :-
1- kies(for drivers)
2- cables
3- charge your tab to 80%
4- windows/os of ur pc or Mac
After you post all of the info. I or we will try our best to walk you thru the process
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Okay, here we go... let's shoot for Jelly Bean!
Model number: GT-p7300, that has wifi with G3, European Version, as I work with the US military at RAF Lakenheath, England, and bought it locally. I am in the London world-time zone. Five hours earlier than EST.
Android version: 3.2
Baseband version: P7300xxkj6
Kernel version: 2.6.36.3 (Original when I bought it, however i did root it) [email protected] #1 SMP PREEMPT Fri Dec 23 13:54:01 KST 2011
Build number: HTJ85B P7300XWKL4
I'm using a PC HP Pavilion with Windows 7 with Odin 3v1.85 that does turn yellow when used.
The Kies on my GT works, but the Kies on my PC for some reason doesn't recognize the GT. I believe the Kies drivers are loaded, ok.
I am using the original Samsonite Cable.
Now you know more about me than my wife does...
Thanks,
Golf Educator :fingers-crossed:

Sorry for all the questions, but it's hard to diagnose all the problems from a distance. It sounds like when you tried to flash cwm something messed up the tab. But if it still turns on you can probably get it to work again. Kies is a crapy program so I always use Odin. When you plug the tab into Odin does the com in Odin turn yellow and show the port?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
Sorry for all the questions, but it's hard to diagnose all the problems from a distance. It sounds like when you tried to flash cwm something messed up the tab. But if it still turns on you can probably get it to work again. Kies is a crapy program so I always use Odin. When you plug the tab into Odin does the com in Odin turn yellow and show the port?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
No problem with the questions... appreciate you taking time to help!
I use Odin 3v1.85 with the correct Samsonite cable. It does turn yellow. I don't know if it shows the port. I haven't toyed with it again as I didn't want to lose the use of the GT to be able to update the new IC firmware that is on the way for this GT-P7300 with wifi and G3, European model.
Regards,
Golf Educator

Ok, that's good, Odin is working and now we can get you up and running. Let's try on thing first, can you to recovery mode? Hold the power button and volume up button down, when the tab responds let go of the power button but still.Hold the volume up, then a second later let go of the volume. This should bring you to a menu where you can do some wipes and a factory reset. (I don't remember exactly what's there) IF you can d o wipes try that first. If that doesn't work then try the factory reset (do you have any data and pictures,etc you wantbacked up?)
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
---------- Post added at 06:56 AM ---------- Previous post was at 06:50 AM ----------
One more question, what country are you in?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
Ok, that's good, Odin is working and now we can get you up and running. Let's try on thing first, can you to recovery mode? Hold the power button and volume up button down, when the tab responds let go of the power button but still.Hold the volume up, then a second later let go of the volume. This should bring you to a menu where you can do some wipes and a factory reset. (I don't remember exactly what's there) IF you can d o wipes try that first. If that doesn't work then try the factory reset (do you have any data and pictures,etc you wantbacked up?)
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
---------- Post added at 06:56 AM ---------- Previous post was at 06:50 AM ----------
One more question, what country are you in?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I'm in the United Kingdom and bought the GT in England... It is the GT-P7300 with wifi and 3G. The IC hasn't been released for the United Kingdom, yet, but it should be out in a few days.
I also think that my Odin is working... but the Recovery Mode is the internal problem that I mentioned with the GT. That is where it is stuck saying that it is loading (but it is not loading). At this point my problem is because of that I can't get to anything and can't do anything in the Recovery Mode with it stuck in that frozen loading effort... including wipes, factory resets, etc., it just keeps on saying that it is loading!
Thanks, again, I appreciate your interest and effort!

Are you trying to use cwm 5.5.0.4 that's in the 8.9 development forum stickies? I would 're-download the .tar version again and try to reflash it with odin. You'll load it in the PDA section and only have the auto-reboot and f.reset checked. Don't have anything else checked. Your first attempt could have been a bad download of cmw.
If you're currently rooted then will have to do something different in order to get the OTA ics when it comes out. I just got it for my tab a few days ago. You'll like it much better than hc.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
Are you trying to use cwm 5.5.0.4 that's in the 8.9 development forum stickies? I would 're-download the .tar version again and try to reflash it with odin. You'll load it in the PDA section and only have the auto-reboot and f.reset checked. Don't have anything else checked. Your first attempt could have been a bad download of cmw.
If you're currently rooted then will have to do something different in order to get the OTA ics when it comes out. I just got it for my tab a few days ago. You'll like it much better than hc.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
OK! I think I've made some progress...
I was able to get clockworkMod_Recovery_v5.5.0.4.tar from androidjinn.com. I was also able to get a connection from Odin as it turned yellow. I loaded the PDA with the .tar as you suggested, and started it. It passed! Now I have a CWM that works. Afterwards, using it I did a Factory Reset.
Now, I have a newly installed hc and a working CWM. But, would you believe that the Downloading Mode is still stuck on loading. Do you think when we flash a new ROM that it will reset the reloading correctly?
I feel pretty proud of myself! I think I am ready for Jelly Bean...
How do I do that?

Sounds great. I've been running jb for quite a while, but frankly I'd wait for the ics. Runs just as good and it's stock. Never thought I'd say that until I tried it.
Sent from my SGH-I727 using xda app-developers app

jd1639 said:
Sounds great. I've been running jb for quite a while, but frankly I'd wait for the ics. Runs just as good and it's stock. Never thought I'd say that until I tried it.
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Two questions:
Which system will enable the GT to be used as a phone?
How do I root my newly factory reset hc so my aps work?
Thanks

I have an i957 tab which is different than yours so I don't have an answer to your second question. To root your device see the stickies in the tab 8.9 development section it should be as easy as flashing a zip file thru your recovery. Make sure you get the right zip for your specific device though. Otherwise you can brick it. The biggest mistake people make its using a file for a similar device rather than one for their specific device.
Sent from my SGH-I727 using xda app-developers app

Nice
Golf Educator said:
OK! I think I've made some progress...
I feel pretty proud of myself! I think I am ready for Jelly Bean...
How do I do that?
Click to expand...
Click to collapse
Good work so far! Now you just need to download the rom (.zip file) and gapps (also a .zip) for the rom you want to use. Put those on the sd card of your tablet. To do this you may have to "mount external storage" in the cwm menus. Once you get those on there, do a full wipe, and then install the rom and gapps. That should do it for you.

To be honest, p7300 can only make calls via root and using cm9 custom rom. Will try to help you mate!! Sorry for late reply..
But just to make it easier, the 1st step is to use stock 2.3.6 that can be installed CWM 5, after getting that. You must download the custom cm9 rom and install into your internal memory(as i can recall all cm based rom will update your cwm 5 to 6 in the process). Will give you the link and try to resolve your probs!!
This is what you will need :-
Download Gt p7300 XEU stock 2.3.x ROM(search via filecorp)
Odin
Pits file
(all this is just in case that you need to flash it back to stock)
Will update my post in a short period of time!
Regard
BlackCl0udMY
Malaysia

Note to gulf educator: if your going to install a custom Rom, cm9 etc., you don't need to root first.
Sent from my SGH-I727 using xda app-developers app

upconvert said:
Good work so far! Now you just need to download the rom (.zip file) and gapps (also a .zip) for the rom you want to use. Put those on the sd card of your tablet. To do this you may have to "mount external storage" in the cwm menus. Once you get those on there, do a full wipe, and then install the rom and gapps. That should do it for you.
Click to expand...
Click to collapse
How do you mount external storage?
Thanks